[SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes

Miscellanous logic and interface fixes

- Fix lpfc_init_vfi_cmpl to check the interface type for interface type 0
  before parsing the results.
- Cast uint32_t values that are multiplied to uint64_t before the
  multiplication.
- Instead of "break" statement when PCI read returned error, use the goto
  statement to the end of the routine after setting return value
- moved the msleep(10) to the beginning of the wait loop for checking the
  SLIPort_Status register
- Added the code to follow the existing wait for SLIPort_Status register RDY,
  ERR, and RN bits to be set by the port before proceeding to perform PCI
  function reset.
- Do not override ulpCt_h and ulpCt_l for SLI 4 ports.
- For vport delete, call lpfc_nlp_put when the vport's vpi state is not
  marked with VPI_REGISTERED.
- Added missed fields into the driver's Controller Attributes Structure
- Changed ringing EQ/CQ/RQ doorbell register to be dependent on the size
  of the queue.
- Return -EACCES in issue_reset if cfg_enable_hba_reset is zero.
- Added new logging flag LOG_FCP_UNDER 0x00040000 to qualify underrun logging.
- Add a check in the fabric name display routine to display 0 if the port
  state is <= FLOGI.
- Add a check to the switch statement in lpfc_decode_firmware_rev to check
  for an 'X'.

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

1 files changed, 4 insertions, 1 deletions

diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 7eb34a6e834..091f68e5cb7 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -2646,7 +2646,9 @@ lpfc_init_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 {
 	struct lpfc_vport *vport = mboxq->vport;
 
-	if (mboxq->u.mb.mbxStatus && (mboxq->u.mb.mbxStatus != 0x4002)) {
+	/* VFI not supported on interface type 0, just do the flogi */
+	if (mboxq->u.mb.mbxStatus && (bf_get(lpfc_sli_intf_if_type,
+	    &phba->sli4_hba.sli_intf) != LPFC_SLI_INTF_IF_TYPE_0)) {
 		lpfc_printf_vlog(vport, KERN_ERR,
 				LOG_MBOX,
 				"2891 Init VFI mailbox failed 0x%x\n",
@@ -2655,6 +2657,7 @@ lpfc_init_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 		lpfc_vport_set_state(vport, FC_VPORT_FAILED);
 		return;
 	}
+
 	lpfc_initial_flogi(vport);
 	mempool_free(mboxq, phba->mbox_mem_pool);
 	return;