Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (209 commits)
  [SCSI] fix oops during scsi scanning
  [SCSI] libsrp: fix memory leak in srp_ring_free()
  [SCSI] libiscsi, bnx2i: make bound ep check common
  [SCSI] libiscsi: add completion function for drivers that do not need pdu processing
  [SCSI] scsi_dh_rdac: changes for rdac debug logging
  [SCSI] scsi_dh_rdac: changes to collect the rdac debug information during the initialization
  [SCSI] scsi_dh_rdac: move the init code from rdac_activate to rdac_bus_attach
  [SCSI] sg: fix oops in the error path in sg_build_indirect()
  [SCSI] mptsas : Bump version to 3.04.12
  [SCSI] mptsas : FW event thread and scsi mid layer deadlock in SYNCHRONIZE CACHE command
  [SCSI] mptsas : Send DID_NO_CONNECT for pending IOs of removed device
  [SCSI] mptsas : PAE Kernel more than 4 GB kernel panic
  [SCSI] mptsas : NULL pointer on big endian systems causing Expander not to tear off
  [SCSI] mptsas : Sanity check for phyinfo is added
  [SCSI] scsi_dh_rdac: Add support for Sun StorageTek ST2500, ST2510 and ST2530
  [SCSI] pmcraid: PMC-Sierra MaxRAID driver to support 6Gb/s SAS RAID controller
  [SCSI] qla2xxx: Update version number to 8.03.01-k6.
  [SCSI] qla2xxx: Properly delete rports attached to a vport.
  [SCSI] qla2xxx: Correct various NPIV issues.
  [SCSI] qla2xxx: Correct qla2x00_eh_wait_on_command() to wait correctly.
  ...

1 files changed, 56 insertions, 3 deletions

diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c
index 0e572d2c5b0..0cffe84976f 100644
--- a/drivers/scsi/device_handler/scsi_dh_emc.c
+++ b/drivers/scsi/device_handler/scsi_dh_emc.c
@@ -561,6 +561,61 @@ done:
 
 	return result;
 }
+/*
+ * params - parameters in the following format
+ *      "no_of_params\0param1\0param2\0param3\0...\0"
+ *      for example, string for 2 parameters with value 10 and 21
+ *      is specified as "2\010\021\0".
+ */
+static int clariion_set_params(struct scsi_device *sdev, const char *params)
+{
+	struct clariion_dh_data *csdev = get_clariion_data(sdev);
+	unsigned int hr = 0, st = 0, argc;
+	const char *p = params;
+	int result = SCSI_DH_OK;
+
+	if ((sscanf(params, "%u", &argc) != 1) || (argc != 2))
+		return -EINVAL;
+
+	while (*p++)
+		;
+	if ((sscanf(p, "%u", &st) != 1) || (st > 1))
+		return -EINVAL;
+
+	while (*p++)
+		;
+	if ((sscanf(p, "%u", &hr) != 1) || (hr > 1))
+		return -EINVAL;
+
+	if (st)
+		csdev->flags |= CLARIION_SHORT_TRESPASS;
+	else
+		csdev->flags &= ~CLARIION_SHORT_TRESPASS;
+
+	if (hr)
+		csdev->flags |= CLARIION_HONOR_RESERVATIONS;
+	else
+		csdev->flags &= ~CLARIION_HONOR_RESERVATIONS;
+
+	/*
+	 * If this path is owned, we have to send a trespass command
+	 * with the new parameters. If not, simply return. Next trespass
+	 * command would use the parameters.
+	 */
+	if (csdev->lun_state != CLARIION_LUN_OWNED)
+		goto done;
+
+	csdev->lun_state = CLARIION_LUN_UNINITIALIZED;
+	result = send_trespass_cmd(sdev, csdev);
+	if (result != SCSI_DH_OK)
+		goto done;
+
+	/* Update status */
+	result = clariion_send_inquiry(sdev, csdev);
+
+done:
+	return result;
+}
 
 static const struct scsi_dh_devlist clariion_dev_list[] = {
 	{"DGC", "RAID"},
@@ -581,11 +636,9 @@ static struct scsi_device_handler clariion_dh = {
 	.check_sense	= clariion_check_sense,
 	.activate	= clariion_activate,
 	.prep_fn	= clariion_prep_fn,
+	.set_params	= clariion_set_params,
 };
 
-/*
- * TODO: need some interface so we can set trespass values
- */
 static int clariion_bus_attach(struct scsi_device *sdev)
 {
 	struct scsi_dh_data *scsi_dh_data;