Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1448 insertions, 0 deletions

diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
new file mode 100644
index 00000000000..d625fdebe05
--- /dev/null
+++ b/drivers/scsi/constants.c
@@ -0,0 +1,1448 @@
+/* 
+ * ASCII values for a number of symbolic constants, printing functions,
+ * etc.
+ * Additions for SCSI 2 and Linux 2.2.x by D. Gilbert (990422)
+ * Additions for SCSI 3+ (SPC-3 T10/1416-D Rev 07 3 May 2002)
+ *   by D. Gilbert and aeb (20020609)
+ * Additions for SPC-3 T10/1416-D Rev 21 22 Sept 2004, D. Gilbert 20041025
+ */
+
+#include <linux/config.h>
+#include <linux/blkdev.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_request.h>
+#include <scsi/scsi_eh.h>
+
+
+
+/* Commands with service actions that change the command name */
+#define MAINTENANCE_IN 0xa3
+#define MAINTENANCE_OUT 0xa4
+#define SERVICE_ACTION_IN_12 0xab
+#define SERVICE_ACTION_OUT_12 0xa9
+#define SERVICE_ACTION_IN_16 0x9e
+#define SERVICE_ACTION_OUT_16 0x9f
+#define VARIABLE_LENGTH_CMD 0x7f
+
+
+
+#ifdef CONFIG_SCSI_CONSTANTS
+static const char * cdb_byte0_names[] = {
+/* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense",
+/* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL,
+	    "Reasssign Blocks",
+/* 08-0d */ "Read (6)", NULL, "Write (6)", "Seek (6)", NULL, NULL,
+/* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry",  
+/* 13-16 */ "Verify (6)", "Recover Buffered Data", "Mode Select (6)",
+	    "Reserve (6)",
+/* 17-1a */ "Release (6)", "Copy", "Erase", "Mode Sense (6)", 
+/* 1b-1d */ "Start/Stop Unit", "Receive Diagnostic", "Send Diagnostic", 
+/* 1e-1f */ "Prevent/Allow Medium Removal", NULL,
+/* 20-22 */  NULL, NULL, NULL,
+/* 23-28 */ "Read Format Capacities", "Set Window",
+	    "Read Capacity (10)", NULL, NULL, "Read (10)", 
+/* 29-2d */ "Read Generation", "Write (10)", "Seek (10)", "Erase (10)", 
+            "Read updated block", 
+/* 2e-31 */ "Write Verify (10)", "Verify (10)", "Search High", "Search Equal", 
+/* 32-34 */ "Search Low", "Set Limits", "Prefetch/Read Position", 
+/* 35-37 */ "Synchronize Cache (10)", "Lock/Unlock Cache (10)",
+	    "Read Defect Data(10)", 
+/* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer", 
+            "Read Buffer", 
+/* 3d-3f */ "Update Block", "Read Long (10)",  "Write Long (10)",
+/* 40-41 */ "Change Definition", "Write Same (10)",
+/* 42-48 */ "Read sub-channel", "Read TOC/PMA/ATIP", "Read density support",
+            "Play audio (10)", "Get configuration", "Play audio msf",
+            "Play audio track/index",
+/* 49-4f */ "Play track relative (10)", "Get event status notification",
+            "Pause/resume", "Log Select", "Log Sense", "Stop play/scan",
+            NULL,
+/* 50-55 */ "Xdwrite", "Xpwrite, Read disk info", "Xdread, Read track info",
+            "Reserve track", "Send OPC info", "Mode Select (10)",
+/* 56-5b */ "Reserve (10)", "Release (10)", "Repair track", "Read master cue",
+            "Mode Sense (10)", "Close track/session",
+/* 5c-5f */ "Read buffer capacity", "Send cue sheet", "Persistent reserve in",
+            "Persistent reserve out",
+/* 60-67 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+/* 68-6f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+/* 70-77 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+/* 78-7f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, "Variable length",
+/* 80-84 */ "Xdwrite (16)", "Rebuild (16)", "Regenerate (16)", "Extended copy",
+            "Receive copy results",
+/* 85-89 */ "Memory Export In (16)", "Access control in", "Access control out",
+            "Read (16)", "Memory Export Out (16)",
+/* 8a-8f */ "Write (16)", NULL, "Read attributes", "Write attributes",
+            "Write and verify (16)", "Verify (16)",
+/* 90-94 */ "Pre-fetch (16)", "Synchronize cache (16)",
+            "Lock/unlock cache (16)", "Write same (16)", NULL,
+/* 95-99 */ NULL, NULL, NULL, NULL, NULL,
+/* 9a-9f */ NULL, NULL, NULL, NULL, "Service action in (16)",
+            "Service action out (16)",
+/* a0-a5 */ "Report luns", "Blank", "Send event", "Maintenance in",
+            "Maintenance out", "Move medium/play audio(12)",
+/* a6-a9 */ "Exchange medium", "Move medium attached", "Read(12)",
+            "Play track relative(12)",
+/* aa-ae */ "Write(12)", NULL, "Erase(12), Get Performance",
+            "Read DVD structure", "Write and verify(12)",
+/* af-b1 */ "Verify(12)", "Search data high(12)", "Search data equal(12)",
+/* b2-b4 */ "Search data low(12)", "Set limits(12)",
+            "Read element status attached",
+/* b5-b6 */ "Request volume element address", "Send volume tag, set streaming",
+/* b7-b9 */ "Read defect data(12)", "Read element status", "Read CD msf",
+/* ba-bc */ "Redundancy group (in), Scan",
+            "Redundancy group (out), Set cd-rom speed", "Spare in, Play cd",
+/* bd-bf */ "Spare out, Mechanism status", "Volume set in, Read cd",
+            "Volume set out, Send DVD structure",
+};
+
+struct value_name_pair {
+	int value;
+	const char * name;
+};
+
+static const struct value_name_pair maint_in_arr[] = {
+	{0x5, "Report device identifier"},
+	{0xa, "Report target port groups"},
+	{0xb, "Report aliases"},
+	{0xc, "Report supported operation codes"},
+	{0xd, "Report supported task management functions"},
+	{0xe, "Report priority"},
+};
+#define MAINT_IN_SZ \
+        (int)(sizeof(maint_in_arr) / sizeof(maint_in_arr[0]))
+
+static const struct value_name_pair maint_out_arr[] = {
+	{0x6, "Set device identifier"},
+	{0xa, "Set target port groups"},
+	{0xb, "Change aliases"},
+	{0xe, "Set priority"},
+};
+#define MAINT_OUT_SZ \
+        (int)(sizeof(maint_out_arr) / sizeof(maint_out_arr[0]))
+
+static const struct value_name_pair serv_in12_arr[] = {
+	{0x1, "Read media serial number"},
+};
+#define SERV_IN12_SZ  \
+        (int)(sizeof(serv_in12_arr) / sizeof(serv_in12_arr[0]))
+
+static const struct value_name_pair serv_out12_arr[] = {
+	{-1, "dummy entry"},
+};
+#define SERV_OUT12_SZ \
+        (int)(sizeof(serv_out12_arr) / sizeof(serv_in12_arr[0]))
+
+static const struct value_name_pair serv_in16_arr[] = {
+	{0x10, "Read capacity(16)"},
+	{0x11, "Read long(16)"},
+};
+#define SERV_IN16_SZ  \
+        (int)(sizeof(serv_in16_arr) / sizeof(serv_in16_arr[0]))
+
+static const struct value_name_pair serv_out16_arr[] = {
+	{0x11, "Write long(16)"},
+	{0x1f, "Notify data transfer device(16)"},
+};
+#define SERV_OUT16_SZ \
+        (int)(sizeof(serv_out16_arr) / sizeof(serv_in16_arr[0]))
+
+static const struct value_name_pair variable_length_arr[] = {
+	{0x1, "Rebuild(32)"},
+	{0x2, "Regenerate(32)"},
+	{0x3, "Xdread(32)"},
+	{0x4, "Xdwrite(32)"},
+	{0x5, "Xdwrite extended(32)"},
+	{0x6, "Xpwrite(32)"},
+	{0x7, "Xdwriteread(32)"},
+	{0x8, "Xdwrite extended(64)"},
+	{0x9, "Read(32)"},
+	{0xa, "Verify(32)"},
+	{0xb, "Write(32)"},
+	{0xc, "Write an verify(32)"},
+	{0xd, "Write same(32)"},
+	{0x8801, "Format OSD"},
+	{0x8802, "Create (osd)"},
+	{0x8803, "List (osd)"},
+	{0x8805, "Read (osd)"},
+	{0x8806, "Write (osd)"},
+	{0x8807, "Append (osd)"},
+	{0x8808, "Flush (osd)"},
+	{0x880a, "Remove (osd)"},
+	{0x880b, "Create partition (osd)"},
+	{0x880c, "Remove partition (osd)"},
+	{0x880e, "Get attributes (osd)"},
+	{0x880f, "Set attributes (osd)"},
+	{0x8812, "Create and write (osd)"},
+	{0x8815, "Create collection (osd)"},
+	{0x8816, "Remove collection (osd)"},
+	{0x8817, "List collection (osd)"},
+	{0x8818, "Set key (osd)"},
+	{0x8819, "Set master key (osd)"},
+	{0x881a, "Flush collection (osd)"},
+	{0x881b, "Flush partition (osd)"},
+	{0x881c, "Flush OSD"},
+	{0x8f7e, "Perform SCSI command (osd)"},
+	{0x8f7f, "Perform task management function (osd)"},
+};
+#define VARIABLE_LENGTH_SZ \
+        (int)(sizeof(variable_length_arr) / sizeof(variable_length_arr[0]))
+
+static const char * get_sa_name(const struct value_name_pair * arr,
+			        int arr_sz, int service_action)
+{
+	int k;
+
+	for (k = 0; k < arr_sz; ++k, ++arr) {
+		if (service_action == arr->value)
+			break;
+	}
+	return (k < arr_sz) ? arr->name : NULL;
+}
+
+/* attempt to guess cdb length if cdb_len==0 . No trailing linefeed. */
+static void print_opcode_name(unsigned char * cdbp, int cdb_len,
+			      int start_of_line)
+{
+	int sa, len, cdb0;
+	const char * name;
+	const char * leadin = start_of_line ? KERN_INFO : "";
+
+	cdb0 = cdbp[0];
+	switch(cdb0) {
+	case VARIABLE_LENGTH_CMD:
+		len = cdbp[7] + 8;
+		if (len < 10) {
+			printk("%sshort variable length command, "
+			       "len=%d ext_len=%d", leadin, len, cdb_len);
+			break;
+		}
+		sa = (cdbp[8] << 8) + cdbp[9];
+		name = get_sa_name(maint_in_arr, MAINT_IN_SZ, sa);
+		if (name) {
+			printk("%s%s", leadin, name);
+			if ((cdb_len > 0) && (len != cdb_len))
+				printk(", in_cdb_len=%d, ext_len=%d",
+				       len, cdb_len);
+		} else {
+			printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+			if ((cdb_len > 0) && (len != cdb_len))
+				printk(", in_cdb_len=%d, ext_len=%d",
+				       len, cdb_len);
+		}
+		break;
+	case MAINTENANCE_IN:
+		sa = cdbp[1] & 0x1f;
+		name = get_sa_name(maint_in_arr, MAINT_IN_SZ, sa);
+		if (name)
+			printk("%s%s", leadin, name);
+		else
+			printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+		break;
+	case MAINTENANCE_OUT:
+		sa = cdbp[1] & 0x1f;
+		name = get_sa_name(maint_out_arr, MAINT_OUT_SZ, sa);
+		if (name)
+			printk("%s%s", leadin, name);
+		else
+			printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+		break;
+	case SERVICE_ACTION_IN_12:
+		sa = cdbp[1] & 0x1f;
+		name = get_sa_name(serv_in12_arr, SERV_IN12_SZ, sa);
+		if (name)
+			printk("%s%s", leadin, name);
+		else
+			printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+		break;
+	case SERVICE_ACTION_OUT_12:
+		sa = cdbp[1] & 0x1f;
+		name = get_sa_name(serv_out12_arr, SERV_OUT12_SZ, sa);
+		if (name)
+			printk("%s%s", leadin, name);
+		else
+			printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+		break;
+	case SERVICE_ACTION_IN_16:
+		sa = cdbp[1] & 0x1f;
+		name = get_sa_name(serv_in16_arr, SERV_IN16_SZ, sa);
+		if (name)
+			printk("%s%s", leadin, name);
+		else
+			printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+		break;
+	case SERVICE_ACTION_OUT_16:
+		sa = cdbp[1] & 0x1f;
+		name = get_sa_name(serv_out16_arr, SERV_OUT16_SZ, sa);
+		if (name)
+			printk("%s%s", leadin, name);
+		else
+			printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+		break;
+	default:
+		if (cdb0 < 0xc0) {
+			name = cdb_byte0_names[cdb0];
+			if (name)
+				printk("%s%s", leadin, name);
+			else
+				printk("%scdb[0]=0x%x (reserved)",
+				       leadin, cdb0);
+		} else
+			printk("%scdb[0]=0x%x (vendor)", leadin, cdb0);
+		break;
+	}
+}
+
+#else /* ifndef CONFIG_SCSI_CONSTANTS */
+
+static void print_opcode_name(unsigned char * cdbp, int cdb_len,
+			      int start_of_line)
+{
+	int sa, len, cdb0;
+	const char * leadin = start_of_line ? KERN_INFO : "";
+
+	cdb0 = cdbp[0];
+	switch(cdb0) {
+	case VARIABLE_LENGTH_CMD:
+		len = cdbp[7] + 8;
+		if (len < 10) {
+			printk("%sshort opcode=0x%x command, len=%d "
+			       "ext_len=%d", leadin, cdb0, len, cdb_len);
+			break;
+		}
+		sa = (cdbp[8] << 8) + cdbp[9];
+		printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+		if (len != cdb_len)
+			printk(", in_cdb_len=%d, ext_len=%d", len, cdb_len);
+		break;
+	case MAINTENANCE_IN:
+	case MAINTENANCE_OUT:
+	case SERVICE_ACTION_IN_12:
+	case SERVICE_ACTION_OUT_12:
+	case SERVICE_ACTION_IN_16:
+	case SERVICE_ACTION_OUT_16:
+		sa = cdbp[1] & 0x1f;
+		printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+		break;
+	default:
+		if (cdb0 < 0xc0)
+			printk("%scdb[0]=0x%x", leadin, cdb0);
+		else
+			printk("%scdb[0]=0x%x (vendor)", leadin, cdb0);
+		break;
+	}
+}
+#endif  
+
+void __scsi_print_command(unsigned char *command)
+{
+	int k, len;
+
+	print_opcode_name(command, 0, 1);
+	if (VARIABLE_LENGTH_CMD == command[0])
+		len = command[7] + 8;
+	else
+		len = COMMAND_SIZE(command[0]);
+	/* print out all bytes in cdb */
+	for (k = 0; k < len; ++k) 
+		printk(" %02x", command[k]);
+	printk("\n");
+}
+EXPORT_SYMBOL(__scsi_print_command);
+
+/* This function (perhaps with the addition of peripheral device type)
+ * is more approriate than __scsi_print_command(). Perhaps that static
+ * can be dropped later if it replaces the __scsi_print_command version.
+ */
+static void scsi_print_cdb(unsigned char *cdb, int cdb_len, int start_of_line)
+{
+	int k;
+
+	print_opcode_name(cdb, cdb_len, start_of_line);
+	/* print out all bytes in cdb */
+	printk(":");
+	for (k = 0; k < cdb_len; ++k) 
+		printk(" %02x", cdb[k]);
+	printk("\n");
+}
+
+/**
+ *
+ *	print_status - print scsi status description
+ *	@scsi_status: scsi status value
+ *
+ *	If the status is recognized, the description is printed.
+ *	Otherwise "Unknown status" is output. No trailing space.
+ *	If CONFIG_SCSI_CONSTANTS is not set, then print status in hex
+ *	(e.g. "0x2" for Check Condition).
+ **/
+void
+scsi_print_status(unsigned char scsi_status) {
+#ifdef CONFIG_SCSI_CONSTANTS
+	const char * ccp;
+
+	switch (scsi_status) {
+	case 0:    ccp = "Good"; break;
+	case 0x2:  ccp = "Check Condition"; break;
+	case 0x4:  ccp = "Condition Met"; break;
+	case 0x8:  ccp = "Busy"; break;
+	case 0x10: ccp = "Intermediate"; break;
+	case 0x14: ccp = "Intermediate-Condition Met"; break;
+	case 0x18: ccp = "Reservation Conflict"; break;
+	case 0x22: ccp = "Command Terminated"; break;	/* obsolete */
+	case 0x28: ccp = "Task set Full"; break;	/* was: Queue Full */
+	case 0x30: ccp = "ACA Active"; break;
+	case 0x40: ccp = "Task Aborted"; break;
+	default:   ccp = "Unknown status";
+	}
+	printk(KERN_INFO "%s", ccp);
+#else
+	printk(KERN_INFO "0x%0x", scsi_status);
+#endif
+}
+EXPORT_SYMBOL(scsi_print_status);
+
+#ifdef CONFIG_SCSI_CONSTANTS
+
+struct error_info {
+	unsigned short code12;	/* 0x0302 looks better than 0x03,0x02 */
+	const char * text;
+};
+
+static struct error_info additional[] =
+{
+	{0x0000, "No additional sense information"},
+	{0x0001, "Filemark detected"},
+	{0x0002, "End-of-partition/medium detected"},
+	{0x0003, "Setmark detected"},
+	{0x0004, "Beginning-of-partition/medium detected"},
+	{0x0005, "End-of-data detected"},
+	{0x0006, "I/O process terminated"},
+	{0x0011, "Audio play operation in progress"},
+	{0x0012, "Audio play operation paused"},
+	{0x0013, "Audio play operation successfully completed"},
+	{0x0014, "Audio play operation stopped due to error"},
+	{0x0015, "No current audio status to return"},
+	{0x0016, "Operation in progress"},
+	{0x0017, "Cleaning requested"},
+	{0x0018, "Erase operation in progress"},
+	{0x0019, "Locate operation in progress"},
+	{0x001A, "Rewind operation in progress"},
+	{0x001B, "Set capacity operation in progress"},
+	{0x001C, "Verify operation in progress"},
+
+	{0x0100, "No index/sector signal"},
+
+	{0x0200, "No seek complete"},
+
+	{0x0300, "Peripheral device write fault"},
+	{0x0301, "No write current"},
+	{0x0302, "Excessive write errors"},
+
+	{0x0400, "Logical unit not ready, cause not reportable"},
+	{0x0401, "Logical unit is in process of becoming ready"},
+	{0x0402, "Logical unit not ready, initializing cmd. required"},
+	{0x0403, "Logical unit not ready, manual intervention required"},
+	{0x0404, "Logical unit not ready, format in progress"},
+	{0x0405, "Logical unit not ready, rebuild in progress"},
+	{0x0406, "Logical unit not ready, recalculation in progress"},
+	{0x0407, "Logical unit not ready, operation in progress"},
+	{0x0408, "Logical unit not ready, long write in progress"},
+	{0x0409, "Logical unit not ready, self-test in progress"},
+	{0x040A, "Logical unit not accessible, asymmetric access state "
+	 "transition"},
+	{0x040B, "Logical unit not accessible, target port in standby state"},
+	{0x040C, "Logical unit not accessible, target port in unavailable "
+	 "state"},
+	{0x0410, "Logical unit not ready, auxiliary memory not accessible"},
+	{0x0411, "Logical unit not ready, notify (enable spinup) required"},
+	{0x0412, "Logical unit not ready, offline"},
+
+	{0x0500, "Logical unit does not respond to selection"},
+
+	{0x0600, "No reference position found"},
+
+	{0x0700, "Multiple peripheral devices selected"},
+
+	{0x0800, "Logical unit communication failure"},
+	{0x0801, "Logical unit communication time-out"},
+	{0x0802, "Logical unit communication parity error"},
+	{0x0803, "Logical unit communication CRC error (Ultra-DMA/32)"},
+	{0x0804, "Unreachable copy target"},
+
+	{0x0900, "Track following error"},
+	{0x0901, "Tracking servo failure"},
+	{0x0902, "Focus servo failure"},
+	{0x0903, "Spindle servo failure"},
+	{0x0904, "Head select fault"},
+
+	{0x0A00, "Error log overflow"},
+
+	{0x0B00, "Warning"},
+	{0x0B01, "Warning - specified temperature exceeded"},
+	{0x0B02, "Warning - enclosure degraded"},
+
+	{0x0C00, "Write error"},
+	{0x0C01, "Write error - recovered with auto reallocation"},
+	{0x0C02, "Write error - auto reallocation failed"},
+	{0x0C03, "Write error - recommend reassignment"},
+	{0x0C04, "Compression check miscompare error"},
+	{0x0C05, "Data expansion occurred during compression"},
+	{0x0C06, "Block not compressible"},
+	{0x0C07, "Write error - recovery needed"},
+	{0x0C08, "Write error - recovery failed"},
+	{0x0C09, "Write error - loss of streaming"},
+	{0x0C0A, "Write error - padding blocks added"},
+	{0x0C0B, "Auxiliary memory write error"},
+	{0x0C0C, "Write error - unexpected unsolicited data"},
+	{0x0C0D, "Write error - not enough unsolicited data"},
+
+	{0x0D00, "Error detected by third party temporary initiator"},
+	{0x0D01, "Third party device failure"},
+	{0x0D02, "Copy target device not reachable"},
+	{0x0D03, "Incorrect copy target device type"},
+	{0x0D04, "Copy target device data underrun"},
+	{0x0D05, "Copy target device data overrun"},
+
+	{0x0E00, "Invalid information unit"},
+	{0x0E01, "Information unit too short"},
+	{0x0E02, "Information unit too long"},
+
+	{0x1000, "Id CRC or ECC error"},
+	{0x1001, "Data block guard check failed"},
+	{0x1002, "Data block application tag check failed"},
+	{0x1003, "Data block reference tag check failed"},
+
+	{0x1100, "Unrecovered read error"},
+	{0x1101, "Read retries exhausted"},
+	{0x1102, "Error too long to correct"},
+	{0x1103, "Multiple read errors"},
+	{0x1104, "Unrecovered read error - auto reallocate failed"},
+	{0x1105, "L-EC uncorrectable error"},
+	{0x1106, "CIRC unrecovered error"},
+	{0x1107, "Data re-synchronization error"},
+	{0x1108, "Incomplete block read"},
+	{0x1109, "No gap found"},
+	{0x110A, "Miscorrected error"},
+	{0x110B, "Unrecovered read error - recommend reassignment"},
+	{0x110C, "Unrecovered read error - recommend rewrite the data"},
+	{0x110D, "De-compression CRC error"},
+	{0x110E, "Cannot decompress using declared algorithm"},
+	{0x110F, "Error reading UPC/EAN number"},
+	{0x1110, "Error reading ISRC number"},
+	{0x1111, "Read error - loss of streaming"},
+	{0x1112, "Auxiliary memory read error"},
+	{0x1113, "Read error - failed retransmission request"},
+
+	{0x1200, "Address mark not found for id field"},
+
+	{0x1300, "Address mark not found for data field"},
+
+	{0x1400, "Recorded entity not found"},
+	{0x1401, "Record not found"},
+	{0x1402, "Filemark or setmark not found"},
+	{0x1403, "End-of-data not found"},
+	{0x1404, "Block sequence error"},
+	{0x1405, "Record not found - recommend reassignment"},
+	{0x1406, "Record not found - data auto-reallocated"},
+	{0x1407, "Locate operation failure"},
+
+	{0x1500, "Random positioning error"},
+	{0x1501, "Mechanical positioning error"},
+	{0x1502, "Positioning error detected by read of medium"},
+
+	{0x1600, "Data synchronization mark error"},
+	{0x1601, "Data sync error - data rewritten"},
+	{0x1602, "Data sync error - recommend rewrite"},
+	{0x1603, "Data sync error - data auto-reallocated"},
+	{0x1604, "Data sync error - recommend reassignment"},
+
+	{0x1700, "Recovered data with no error correction applied"},
+	{0x1701, "Recovered data with retries"},
+	{0x1702, "Recovered data with positive head offset"},
+	{0x1703, "Recovered data with negative head offset"},
+	{0x1704, "Recovered data with retries and/or circ applied"},
+	{0x1705, "Recovered data using previous sector id"},
+	{0x1706, "Recovered data without ECC - data auto-reallocated"},
+	{0x1707, "Recovered data without ECC - recommend reassignment"},
+	{0x1708, "Recovered data without ECC - recommend rewrite"},
+	{0x1709, "Recovered data without ECC - data rewritten"},
+
+	{0x1800, "Recovered data with error correction applied"},
+	{0x1801, "Recovered data with error corr. & retries applied"},
+	{0x1802, "Recovered data - data auto-reallocated"},
+	{0x1803, "Recovered data with CIRC"},
+	{0x1804, "Recovered data with L-EC"},
+	{0x1805, "Recovered data - recommend reassignment"},
+	{0x1806, "Recovered data - recommend rewrite"},
+	{0x1807, "Recovered data with ECC - data rewritten"},
+	{0x1808, "Recovered data with linking"},
+
+	{0x1900, "Defect list error"},
+	{0x1901, "Defect list not available"},
+	{0x1902, "Defect list error in primary list"},
+	{0x1903, "Defect list error in grown list"},
+
+	{0x1A00, "Parameter list length error"},
+
+	{0x1B00, "Synchronous data transfer error"},
+
+	{0x1C00, "Defect list not found"},
+	{0x1C01, "Primary defect list not found"},
+	{0x1C02, "Grown defect list not found"},
+
+	{0x1D00, "Miscompare during verify operation"},
+
+	{0x1E00, "Recovered id with ECC correction"},
+
+	{0x1F00, "Partial defect list transfer"},
+
+	{0x2000, "Invalid command operation code"},
+	{0x2001, "Access denied - initiator pending-enrolled"},
+	{0x2002, "Access denied - no access rights"},
+	{0x2003, "Access denied - invalid mgmt id key"},
+	{0x2004, "Illegal command while in write capable state"},
+	{0x2005, "Obsolete"},
+	{0x2006, "Illegal command while in explicit address mode"},
+	{0x2007, "Illegal command while in implicit address mode"},
+	{0x2008, "Access denied - enrollment conflict"},
+	{0x2009, "Access denied - invalid LU identifier"},
+	{0x200A, "Access denied - invalid proxy token"},
+	{0x200B, "Access denied - ACL LUN conflict"},
+
+	{0x2100, "Logical block address out of range"},
+	{0x2101, "Invalid element address"},
+	{0x2102, "Invalid address for write"},
+
+	{0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"},
+
+	{0x2400, "Invalid field in cdb"},
+	{0x2401, "CDB decryption error"},
+	{0x2404, "Security audit value frozen"},
+	{0x2405, "Security working key frozen"},
+	{0x2406, "Nonce not unique"},
+	{0x2407, "Nonce timestamp out of range"},
+
+	{0x2500, "Logical unit not supported"},
+
+	{0x2600, "Invalid field in parameter list"},
+	{0x2601, "Parameter not supported"},
+	{0x2602, "Parameter value invalid"},
+	{0x2603, "Threshold parameters not supported"},
+	{0x2604, "Invalid release of persistent reservation"},
+	{0x2605, "Data decryption error"},
+	{0x2606, "Too many target descriptors"},
+	{0x2607, "Unsupported target descriptor type code"},
+	{0x2608, "Too many segment descriptors"},
+	{0x2609, "Unsupported segment descriptor type code"},
+	{0x260A, "Unexpected inexact segment"},
+	{0x260B, "Inline data length exceeded"},
+	{0x260C, "Invalid operation for copy source or destination"},
+	{0x260D, "Copy segment granularity violation"},
+	{0x260E, "Invalid parameter while port is enabled"},
+	{0x260F, "Invalid data-out buffer integrity"},
+
+	{0x2700, "Write protected"},
+	{0x2701, "Hardware write protected"},
+	{0x2702, "Logical unit software write protected"},
+	{0x2703, "Associated write protect"},
+	{0x2704, "Persistent write protect"},
+	{0x2705, "Permanent write protect"},
+	{0x2706, "Conditional write protect"},
+
+	{0x2800, "Not ready to ready change, medium may have changed"},
+	{0x2801, "Import or export element accessed"},
+
+	{0x2900, "Power on, reset, or bus device reset occurred"},
+	{0x2901, "Power on occurred"},
+	{0x2902, "Scsi bus reset occurred"},
+	{0x2903, "Bus device reset function occurred"},
+	{0x2904, "Device internal reset"},
+	{0x2905, "Transceiver mode changed to single-ended"},
+	{0x2906, "Transceiver mode changed to lvd"},
+	{0x2907, "I_T nexus loss occurred"},
+
+	{0x2A00, "Parameters changed"},
+	{0x2A01, "Mode parameters changed"},
+	{0x2A02, "Log parameters changed"},
+	{0x2A03, "Reservations preempted"},
+	{0x2A04, "Reservations released"},
+	{0x2A05, "Registrations preempted"},
+	{0x2A06, "Asymmetric access state changed"},
+	{0x2A07, "Implicit asymmetric access state transition failed"},
+	{0x2A08, "Priority changed"},
+	{0x2A09, "Capacity data has changed"},
+
+	{0x2B00, "Copy cannot execute since host cannot disconnect"},
+
+	{0x2C00, "Command sequence error"},
+	{0x2C01, "Too many windows specified"},
+	{0x2C02, "Invalid combination of windows specified"},
+	{0x2C03, "Current program area is not empty"},
+	{0x2C04, "Current program area is empty"},
+	{0x2C05, "Illegal power condition request"},
+	{0x2C06, "Persistent prevent conflict"},
+	{0x2C07, "Previous busy status"},
+	{0x2C08, "Previous task set full status"},
+	{0x2C09, "Previous reservation conflict status"},
+	{0x2C0A, "Partition or collection contains user objects"},
+	{0x2C0B, "Not reserved"},
+
+	{0x2D00, "Overwrite error on update in place"},
+
+	{0x2E00, "Insufficient time for operation"},
+
+	{0x2F00, "Commands cleared by another initiator"},
+
+	{0x3000, "Incompatible medium installed"},
+	{0x3001, "Cannot read medium - unknown format"},
+	{0x3002, "Cannot read medium - incompatible format"},
+	{0x3003, "Cleaning cartridge installed"},
+	{0x3004, "Cannot write medium - unknown format"},
+	{0x3005, "Cannot write medium - incompatible format"},
+	{0x3006, "Cannot format medium - incompatible medium"},
+	{0x3007, "Cleaning failure"},
+	{0x3008, "Cannot write - application code mismatch"},
+	{0x3009, "Current session not fixated for append"},
+	{0x300A, "Cleaning request rejected"},
+	{0x300C, "WORM medium, overwrite attempted"},
+	{0x3010, "Medium not formatted"},
+
+	{0x3100, "Medium format corrupted"},
+	{0x3101, "Format command failed"},
+	{0x3102, "Zoned formatting failed due to spare linking"},
+
+	{0x3200, "No defect spare location available"},
+	{0x3201, "Defect list update failure"},
+
+	{0x3300, "Tape length error"},
+
+	{0x3400, "Enclosure failure"},
+
+	{0x3500, "Enclosure services failure"},
+	{0x3501, "Unsupported enclosure function"},
+	{0x3502, "Enclosure services unavailable"},
+	{0x3503, "Enclosure services transfer failure"},
+	{0x3504, "Enclosure services transfer refused"},
+	{0x3505, "Enclosure services checksum error"},
+
+	{0x3600, "Ribbon, ink, or toner failure"},
+
+	{0x3700, "Rounded parameter"},
+
+	{0x3800, "Event status notification"},
+	{0x3802, "Esn - power management class event"},
+	{0x3804, "Esn - media class event"},
+	{0x3806, "Esn - device busy class event"},
+
+	{0x3900, "Saving parameters not supported"},
+
+	{0x3A00, "Medium not present"},
+	{0x3A01, "Medium not present - tray closed"},
+	{0x3A02, "Medium not present - tray open"},
+	{0x3A03, "Medium not present - loadable"},
+	{0x3A04, "Medium not present - medium auxiliary memory accessible"},
+
+	{0x3B00, "Sequential positioning error"},
+	{0x3B01, "Tape position error at beginning-of-medium"},
+	{0x3B02, "Tape position error at end-of-medium"},
+	{0x3B03, "Tape or electronic vertical forms unit not ready"},
+	{0x3B04, "Slew failure"},
+	{0x3B05, "Paper jam"},
+	{0x3B06, "Failed to sense top-of-form"},
+	{0x3B07, "Failed to sense bottom-of-form"},
+	{0x3B08, "Reposition error"},
+	{0x3B09, "Read past end of medium"},
+	{0x3B0A, "Read past beginning of medium"},
+	{0x3B0B, "Position past end of medium"},
+	{0x3B0C, "Position past beginning of medium"},
+	{0x3B0D, "Medium destination element full"},
+	{0x3B0E, "Medium source element empty"},
+	{0x3B0F, "End of medium reached"},
+	{0x3B11, "Medium magazine not accessible"},
+	{0x3B12, "Medium magazine removed"},
+	{0x3B13, "Medium magazine inserted"},
+	{0x3B14, "Medium magazine locked"},
+	{0x3B15, "Medium magazine unlocked"},
+	{0x3B16, "Mechanical positioning or changer error"},
+	{0x3B17, "Read past end of user object"},
+
+	{0x3D00, "Invalid bits in identify message"},
+
+	{0x3E00, "Logical unit has not self-configured yet"},
+	{0x3E01, "Logical unit failure"},
+	{0x3E02, "Timeout on logical unit"},
+	{0x3E03, "Logical unit failed self-test"},
+	{0x3E04, "Logical unit unable to update self-test log"},
+
+	{0x3F00, "Target operating conditions have changed"},
+	{0x3F01, "Microcode has been changed"},
+	{0x3F02, "Changed operating definition"},
+	{0x3F03, "Inquiry data has changed"},
+	{0x3F04, "Component device attached"},
+	{0x3F05, "Device identifier changed"},
+	{0x3F06, "Redundancy group created or modified"},
+	{0x3F07, "Redundancy group deleted"},
+	{0x3F08, "Spare created or modified"},
+	{0x3F09, "Spare deleted"},
+	{0x3F0A, "Volume set created or modified"},
+	{0x3F0B, "Volume set deleted"},
+	{0x3F0C, "Volume set deassigned"},
+	{0x3F0D, "Volume set reassigned"},
+	{0x3F0E, "Reported luns data has changed"},
+	{0x3F0F, "Echo buffer overwritten"},
+	{0x3F10, "Medium loadable"},
+	{0x3F11, "Medium auxiliary memory accessible"},
+/*
+ *	{0x40NN, "Ram failure"},
+ *	{0x40NN, "Diagnostic failure on component nn"},
+ *	{0x41NN, "Data path failure"},
+ *	{0x42NN, "Power-on or self-test failure"},
+ */
+	{0x4300, "Message error"},
+
+	{0x4400, "Internal target failure"},
+
+	{0x4500, "Select or reselect failure"},
+
+	{0x4600, "Unsuccessful soft reset"},
+
+	{0x4700, "Scsi parity error"},
+	{0x4701, "Data phase CRC error detected"},
+	{0x4702, "Scsi parity error detected during st data phase"},
+	{0x4703, "Information unit CRC error detected"},
+	{0x4704, "Asynchronous information protection error detected"},
+	{0x4705, "Protocol service CRC error"},
+	{0x477f, "Some commands cleared by iSCSI Protocol event"},
+
+	{0x4800, "Initiator detected error message received"},
+
+	{0x4900, "Invalid message error"},
+
+	{0x4A00, "Command phase error"},
+
+	{0x4B00, "Data phase error"},
+	{0x4B01, "Invalid target port transfer tag received"},
+	{0x4B02, "Too much write data"},
+	{0x4B03, "Ack/nak timeout"},
+	{0x4B04, "Nak received"},
+	{0x4B05, "Data offset error"},
+	{0x4B06, "Initiator response timeout"},
+
+	{0x4C00, "Logical unit failed self-configuration"},
+/*
+ *	{0x4DNN, "Tagged overlapped commands (nn = queue tag)"},
+ */
+	{0x4E00, "Overlapped commands attempted"},
+
+	{0x5000, "Write append error"},
+	{0x5001, "Write append position error"},
+	{0x5002, "Position error related to timing"},
+
+	{0x5100, "Erase failure"},
+	{0x5101, "Erase failure - incomplete erase operation detected"},
+
+	{0x5200, "Cartridge fault"},
+
+	{0x5300, "Media load or eject failed"},
+	{0x5301, "Unload tape failure"},
+	{0x5302, "Medium removal prevented"},
+
+	{0x5400, "Scsi to host system interface failure"},
+
+	{0x5500, "System resource failure"},
+	{0x5501, "System buffer full"},
+	{0x5502, "Insufficient reservation resources"},
+	{0x5503, "Insufficient resources"},
+	{0x5504, "Insufficient registration resources"},
+	{0x5505, "Insufficient access control resources"},
+	{0x5506, "Auxiliary memory out of space"},
+	{0x5507, "Quota error"},
+
+	{0x5700, "Unable to recover table-of-contents"},
+
+	{0x5800, "Generation does not exist"},
+
+	{0x5900, "Updated block read"},
+
+	{0x5A00, "Operator request or state change input"},
+	{0x5A01, "Operator medium removal request"},
+	{0x5A02, "Operator selected write protect"},
+	{0x5A03, "Operator selected write permit"},
+
+	{0x5B00, "Log exception"},
+	{0x5B01, "Threshold condition met"},
+	{0x5B02, "Log counter at maximum"},
+	{0x5B03, "Log list codes exhausted"},
+
+	{0x5C00, "Rpl status change"},
+	{0x5C01, "Spindles synchronized"},
+	{0x5C02, "Spindles not synchronized"},
+
+	{0x5D00, "Failure prediction threshold exceeded"},
+	{0x5D01, "Media failure prediction threshold exceeded"},
+	{0x5D02, "Logical unit failure prediction threshold exceeded"},
+	{0x5D03, "Spare area exhaustion prediction threshold exceeded"},
+	{0x5D10, "Hardware impending failure general hard drive failure"},
+	{0x5D11, "Hardware impending failure drive error rate too high"},
+	{0x5D12, "Hardware impending failure data error rate too high"},
+	{0x5D13, "Hardware impending failure seek error rate too high"},
+	{0x5D14, "Hardware impending failure too many block reassigns"},
+	{0x5D15, "Hardware impending failure access times too high"},
+	{0x5D16, "Hardware impending failure start unit times too high"},
+	{0x5D17, "Hardware impending failure channel parametrics"},
+	{0x5D18, "Hardware impending failure controller detected"},
+	{0x5D19, "Hardware impending failure throughput performance"},
+	{0x5D1A, "Hardware impending failure seek time performance"},
+	{0x5D1B, "Hardware impending failure spin-up retry count"},
+	{0x5D1C, "Hardware impending failure drive calibration retry count"},
+	{0x5D20, "Controller impending failure general hard drive failure"},
+	{0x5D21, "Controller impending failure drive error rate too high"},
+	{0x5D22, "Controller impending failure data error rate too high"},
+	{0x5D23, "Controller impending failure seek error rate too high"},
+	{0x5D24, "Controller impending failure too many block reassigns"},
+	{0x5D25, "Controller impending failure access times too high"},
+	{0x5D26, "Controller impending failure start unit times too high"},
+	{0x5D27, "Controller impending failure channel parametrics"},
+	{0x5D28, "Controller impending failure controller detected"},
+	{0x5D29, "Controller impending failure throughput performance"},
+	{0x5D2A, "Controller impending failure seek time performance"},
+	{0x5D2B, "Controller impending failure spin-up retry count"},
+	{0x5D2C, "Controller impending failure drive calibration retry count"},
+	{0x5D30, "Data channel impending failure general hard drive failure"},
+	{0x5D31, "Data channel impending failure drive error rate too high"},
+	{0x5D32, "Data channel impending failure data error rate too high"},
+	{0x5D33, "Data channel impending failure seek error rate too high"},
+	{0x5D34, "Data channel impending failure too many block reassigns"},
+	{0x5D35, "Data channel impending failure access times too high"},
+	{0x5D36, "Data channel impending failure start unit times too high"},
+	{0x5D37, "Data channel impending failure channel parametrics"},
+	{0x5D38, "Data channel impending failure controller detected"},
+	{0x5D39, "Data channel impending failure throughput performance"},
+	{0x5D3A, "Data channel impending failure seek time performance"},
+	{0x5D3B, "Data channel impending failure spin-up retry count"},
+	{0x5D3C, "Data channel impending failure drive calibration retry "
+	 "count"},
+	{0x5D40, "Servo impending failure general hard drive failure"},
+	{0x5D41, "Servo impending failure drive error rate too high"},
+	{0x5D42, "Servo impending failure data error rate too high"},
+	{0x5D43, "Servo impending failure seek error rate too high"},
+	{0x5D44, "Servo impending failure too many block reassigns"},
+	{0x5D45, "Servo impending failure access times too high"},
+	{0x5D46, "Servo impending failure start unit times too high"},
+	{0x5D47, "Servo impending failure channel parametrics"},
+	{0x5D48, "Servo impending failure controller detected"},
+	{0x5D49, "Servo impending failure throughput performance"},
+	{0x5D4A, "Servo impending failure seek time performance"},
+	{0x5D4B, "Servo impending failure spin-up retry count"},
+	{0x5D4C, "Servo impending failure drive calibration retry count"},
+	{0x5D50, "Spindle impending failure general hard drive failure"},
+	{0x5D51, "Spindle impending failure drive error rate too high"},
+	{0x5D52, "Spindle impending failure data error rate too high"},
+	{0x5D53, "Spindle impending failure seek error rate too high"},
+	{0x5D54, "Spindle impending failure too many block reassigns"},
+	{0x5D55, "Spindle impending failure access times too high"},
+	{0x5D56, "Spindle impending failure start unit times too high"},
+	{0x5D57, "Spindle impending failure channel parametrics"},
+	{0x5D58, "Spindle impending failure controller detected"},
+	{0x5D59, "Spindle impending failure throughput performance"},
+	{0x5D5A, "Spindle impending failure seek time performance"},
+	{0x5D5B, "Spindle impending failure spin-up retry count"},
+	{0x5D5C, "Spindle impending failure drive calibration retry count"},
+	{0x5D60, "Firmware impending failure general hard drive failure"},
+	{0x5D61, "Firmware impending failure drive error rate too high"},
+	{0x5D62, "Firmware impending failure data error rate too high"},
+	{0x5D63, "Firmware impending failure seek error rate too high"},
+	{0x5D64, "Firmware impending failure too many block reassigns"},
+	{0x5D65, "Firmware impending failure access times too high"},
+	{0x5D66, "Firmware impending failure start unit times too high"},
+	{0x5D67, "Firmware impending failure channel parametrics"},
+	{0x5D68, "Firmware impending failure controller detected"},
+	{0x5D69, "Firmware impending failure throughput performance"},
+	{0x5D6A, "Firmware impending failure seek time performance"},
+	{0x5D6B, "Firmware impending failure spin-up retry count"},
+	{0x5D6C, "Firmware impending failure drive calibration retry count"},
+	{0x5DFF, "Failure prediction threshold exceede