Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1412 insertions, 0 deletions

diff --git a/drivers/scsi/aic7xxx/aiclib.c b/drivers/scsi/aic7xxx/aiclib.c
new file mode 100644
index 00000000000..79bfd9efd8e
--- /dev/null
+++ b/drivers/scsi/aic7xxx/aiclib.c
@@ -0,0 +1,1412 @@
+/*
+ * Implementation of Utility functions for all SCSI device types.
+ *
+ * Copyright (c) 1997, 1998, 1999 Justin T. Gibbs.
+ * Copyright (c) 1997, 1998 Kenneth D. Merry.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification, immediately at the beginning of the file.
+ * 2. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $FreeBSD: src/sys/cam/scsi/scsi_all.c,v 1.38 2002/09/23 04:56:35 mjacob Exp $
+ * $Id$
+ */
+
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/version.h>
+
+/* Core SCSI definitions */
+#include "scsi.h"
+#include <scsi/scsi_host.h>
+#include "aiclib.h"
+#include "cam.h"
+
+#ifndef FALSE
+#define FALSE   0
+#endif /* FALSE */
+#ifndef TRUE
+#define TRUE    1
+#endif /* TRUE */
+#ifndef ERESTART
+#define ERESTART        -1              /* restart syscall */
+#endif
+#ifndef EJUSTRETURN
+#define EJUSTRETURN     -2              /* don't modify regs, just return */
+#endif
+
+static int	ascentrycomp(const void *key, const void *member);
+static int	senseentrycomp(const void *key, const void *member);
+static void	fetchtableentries(int sense_key, int asc, int ascq,
+				  struct scsi_inquiry_data *,
+				  const struct sense_key_table_entry **,
+				  const struct asc_table_entry **);
+static void *	scsibsearch(const void *key, const void *base, size_t nmemb,
+			    size_t size,
+			    int (*compar)(const void *, const void *));
+typedef int (cam_quirkmatch_t)(caddr_t, caddr_t);
+static int	cam_strmatch(const u_int8_t *str, const u_int8_t *pattern,
+			     int str_len);
+static caddr_t	cam_quirkmatch(caddr_t target, caddr_t quirk_table,
+			       int num_entries, int entry_size,
+			       cam_quirkmatch_t *comp_func);
+
+#define SCSI_NO_SENSE_STRINGS 1
+#if !defined(SCSI_NO_SENSE_STRINGS)
+#define SST(asc, ascq, action, desc) \
+	asc, ascq, action, desc
+#else 
+static const char empty_string[] = "";
+
+#define SST(asc, ascq, action, desc) \
+	asc, ascq, action, empty_string
+#endif 
+
+static const struct sense_key_table_entry sense_key_table[] = 
+{
+	{ SSD_KEY_NO_SENSE, SS_NOP, "NO SENSE" },
+	{ SSD_KEY_RECOVERED_ERROR, SS_NOP|SSQ_PRINT_SENSE, "RECOVERED ERROR" },
+	{
+	  SSD_KEY_NOT_READY, SS_TUR|SSQ_MANY|SSQ_DECREMENT_COUNT|EBUSY,
+	  "NOT READY"
+	},
+	{ SSD_KEY_MEDIUM_ERROR, SS_RDEF, "MEDIUM ERROR" },
+	{ SSD_KEY_HARDWARE_ERROR, SS_RDEF, "HARDWARE FAILURE" },
+	{ SSD_KEY_ILLEGAL_REQUEST, SS_FATAL|EINVAL, "ILLEGAL REQUEST" },
+	{ SSD_KEY_UNIT_ATTENTION, SS_FATAL|ENXIO, "UNIT ATTENTION" },
+	{ SSD_KEY_DATA_PROTECT, SS_FATAL|EACCES, "DATA PROTECT" },
+	{ SSD_KEY_BLANK_CHECK, SS_FATAL|ENOSPC, "BLANK CHECK" },
+	{ SSD_KEY_Vendor_Specific, SS_FATAL|EIO, "Vendor Specific" },
+	{ SSD_KEY_COPY_ABORTED, SS_FATAL|EIO, "COPY ABORTED" },
+	{ SSD_KEY_ABORTED_COMMAND, SS_RDEF, "ABORTED COMMAND" },
+	{ SSD_KEY_EQUAL, SS_NOP, "EQUAL" },
+	{ SSD_KEY_VOLUME_OVERFLOW, SS_FATAL|EIO, "VOLUME OVERFLOW" },
+	{ SSD_KEY_MISCOMPARE, SS_NOP, "MISCOMPARE" },
+	{ SSD_KEY_RESERVED, SS_FATAL|EIO, "RESERVED" }
+};
+
+static const int sense_key_table_size =
+    sizeof(sense_key_table)/sizeof(sense_key_table[0]);
+
+static struct asc_table_entry quantum_fireball_entries[] = {
+	{SST(0x04, 0x0b, SS_START|SSQ_DECREMENT_COUNT|ENXIO, 
+	     "Logical unit not ready, initializing cmd. required")}
+};
+
+static struct asc_table_entry sony_mo_entries[] = {
+	{SST(0x04, 0x00, SS_START|SSQ_DECREMENT_COUNT|ENXIO,
+	     "Logical unit not ready, cause not reportable")}
+};
+
+static struct scsi_sense_quirk_entry sense_quirk_table[] = {
+	{
+		/*
+		 * The Quantum Fireball ST and SE like to return 0x04 0x0b when
+		 * they really should return 0x04 0x02.  0x04,0x0b isn't
+		 * defined in any SCSI spec, and it isn't mentioned in the
+		 * hardware manual for these drives.
+		 */
+		{T_DIRECT, SIP_MEDIA_FIXED, "QUANTUM", "FIREBALL S*", "*"},
+		/*num_sense_keys*/0,
+		sizeof(quantum_fireball_entries)/sizeof(struct asc_table_entry),
+		/*sense key entries*/NULL,
+		quantum_fireball_entries
+	},
+	{
+		/*
+		 * This Sony MO drive likes to return 0x04, 0x00 when it
+		 * isn't spun up.
+		 */
+		{T_DIRECT, SIP_MEDIA_REMOVABLE, "SONY", "SMO-*", "*"},
+		/*num_sense_keys*/0,
+		sizeof(sony_mo_entries)/sizeof(struct asc_table_entry),
+		/*sense key entries*/NULL,
+		sony_mo_entries
+	}
+};
+
+static const int sense_quirk_table_size =
+    sizeof(sense_quirk_table)/sizeof(sense_quirk_table[0]);
+
+static struct asc_table_entry asc_table[] = {
+/*
+ * From File: ASC-NUM.TXT
+ * SCSI ASC/ASCQ Assignments
+ * Numeric Sorted Listing
+ * as of  5/12/97
+ *
+ * D - DIRECT ACCESS DEVICE (SBC)                     device column key
+ * .T - SEQUENTIAL ACCESS DEVICE (SSC)               -------------------
+ * . L - PRINTER DEVICE (SSC)                           blank = reserved
+ * .  P - PROCESSOR DEVICE (SPC)                     not blank = allowed
+ * .  .W - WRITE ONCE READ MULTIPLE DEVICE (SBC)
+ * .  . R - CD DEVICE (MMC)
+ * .  .  S - SCANNER DEVICE (SGC)
+ * .  .  .O - OPTICAL MEMORY DEVICE (SBC)
+ * .  .  . M - MEDIA CHANGER DEVICE (SMC)
+ * .  .  .  C - COMMUNICATION DEVICE (SSC)
+ * .  .  .  .A - STORAGE ARRAY DEVICE (SCC)
+ * .  .  .  . E - ENCLOSURE SERVICES DEVICE (SES)
+ * DTLPWRSOMCAE        ASC   ASCQ  Action  Description
+ * ------------        ----  ----  ------  -----------------------------------*/
+/* DTLPWRSOMCAE */{SST(0x00, 0x00, SS_NOP,
+			"No additional sense information") },
+/*  T    S      */{SST(0x00, 0x01, SS_RDEF,
+			"Filemark detected") },
+/*  T    S      */{SST(0x00, 0x02, SS_RDEF,
+			"End-of-partition/medium detected") },
+/*  T           */{SST(0x00, 0x03, SS_RDEF,
+			"Setmark detected") },
+/*  T    S      */{SST(0x00, 0x04, SS_RDEF,
+			"Beginning-of-partition/medium detected") },
+/*  T    S      */{SST(0x00, 0x05, SS_RDEF,
+			"End-of-data detected") },
+/* DTLPWRSOMCAE */{SST(0x00, 0x06, SS_RDEF,
+			"I/O process terminated") },
+/*      R       */{SST(0x00, 0x11, SS_FATAL|EBUSY,
+			"Audio play operation in progress") },
+/*      R       */{SST(0x00, 0x12, SS_NOP,
+			"Audio play operation paused") },
+/*      R       */{SST(0x00, 0x13, SS_NOP,
+			"Audio play operation successfully completed") },
+/*      R       */{SST(0x00, 0x14, SS_RDEF,
+			"Audio play operation stopped due to error") },
+/*      R       */{SST(0x00, 0x15, SS_NOP,
+			"No current audio status to return") },
+/* DTLPWRSOMCAE */{SST(0x00, 0x16, SS_FATAL|EBUSY,
+			"Operation in progress") },
+/* DTL WRSOM AE */{SST(0x00, 0x17, SS_RDEF,
+			"Cleaning requested") },
+/* D   W  O     */{SST(0x01, 0x00, SS_RDEF,
+			"No index/sector signal") },
+/* D   WR OM    */{SST(0x02, 0x00, SS_RDEF,
+			"No seek complete") },
+/* DTL W SO     */{SST(0x03, 0x00, SS_RDEF,
+			"Peripheral device write fault") },
+/*  T           */{SST(0x03, 0x01, SS_RDEF,
+			"No write current") },
+/*  T           */{SST(0x03, 0x02, SS_RDEF,
+			"Excessive write errors") },
+/* DTLPWRSOMCAE */{SST(0x04, 0x00,
+			SS_TUR|SSQ_DELAY|SSQ_MANY|SSQ_DECREMENT_COUNT|EIO,
+			"Logical unit not ready, cause not reportable") },
+/* DTLPWRSOMCAE */{SST(0x04, 0x01,
+			SS_TUR|SSQ_DELAY|SSQ_MANY|SSQ_DECREMENT_COUNT|EBUSY,
+			"Logical unit is in process of becoming ready") },
+/* DTLPWRSOMCAE */{SST(0x04, 0x02, SS_START|SSQ_DECREMENT_COUNT|ENXIO,
+			"Logical unit not ready, initializing cmd. required") },
+/* DTLPWRSOMCAE */{SST(0x04, 0x03, SS_FATAL|ENXIO,
+			"Logical unit not ready, manual intervention required")},
+/* DTL    O     */{SST(0x04, 0x04, SS_FATAL|EBUSY,
+			"Logical unit not ready, format in progress") },
+/* DT  W  OMCA  */{SST(0x04, 0x05, SS_FATAL|EBUSY,
+			"Logical unit not ready, rebuild in progress") },
+/* DT  W  OMCA  */{SST(0x04, 0x06, SS_FATAL|EBUSY,
+			"Logical unit not ready, recalculation in progress") },
+/* DTLPWRSOMCAE */{SST(0x04, 0x07, SS_FATAL|EBUSY,
+			"Logical unit not ready, operation in progress") },
+/*      R       */{SST(0x04, 0x08, SS_FATAL|EBUSY,
+			"Logical unit not ready, long write in progress") },
+/* DTL WRSOMCAE */{SST(0x05, 0x00, SS_RDEF,
+			"Logical unit does not respond to selection") },
+/* D   WR OM    */{SST(0x06, 0x00, SS_RDEF,
+			"No reference position found") },
+/* DTL WRSOM    */{SST(0x07, 0x00, SS_RDEF,
+			"Multiple peripheral devices selected") },
+/* DTL WRSOMCAE */{SST(0x08, 0x00, SS_RDEF,
+			"Logical unit communication failure") },
+/* DTL WRSOMCAE */{SST(0x08, 0x01, SS_RDEF,
+			"Logical unit communication time-out") },
+/* DTL WRSOMCAE */{SST(0x08, 0x02, SS_RDEF,
+			"Logical unit communication parity error") },
+/* DT   R OM    */{SST(0x08, 0x03, SS_RDEF,
+			"Logical unit communication crc error (ultra-dma/32)")},
+/* DT  WR O     */{SST(0x09, 0x00, SS_RDEF,
+			"Track following error") },
+/*     WR O     */{SST(0x09, 0x01, SS_RDEF,
+			"Tracking servo failure") },
+/*     WR O     */{SST(0x09, 0x02, SS_RDEF,
+			"Focus servo failure") },
+/*     WR O     */{SST(0x09, 0x03, SS_RDEF,
+			"Spindle servo failure") },
+/* DT  WR O     */{SST(0x09, 0x04, SS_RDEF,
+			"Head select fault") },
+/* DTLPWRSOMCAE */{SST(0x0A, 0x00, SS_FATAL|ENOSPC,
+			"Error log overflow") },
+/* DTLPWRSOMCAE */{SST(0x0B, 0x00, SS_RDEF,
+			"Warning") },
+/* DTLPWRSOMCAE */{SST(0x0B, 0x01, SS_RDEF,
+			"Specified temperature exceeded") },
+/* DTLPWRSOMCAE */{SST(0x0B, 0x02, SS_RDEF,
+			"Enclosure degraded") },
+/*  T   RS      */{SST(0x0C, 0x00, SS_RDEF,
+			"Write error") },
+/* D   W  O     */{SST(0x0C, 0x01, SS_NOP|SSQ_PRINT_SENSE,
+			"Write error - recovered with auto reallocation") },
+/* D   W  O     */{SST(0x0C, 0x02, SS_RDEF,
+			"Write error - auto reallocation failed") },
+/* D   W  O     */{SST(0x0C, 0x03, SS_RDEF,
+			"Write error - recommend reassignment") },
+/* DT  W  O     */{SST(0x0C, 0x04, SS_RDEF,
+			"Compression check miscompare error") },
+/* DT  W  O     */{SST(0x0C, 0x05, SS_RDEF,
+			"Data expansion occurred during compression") },
+/* DT  W  O     */{SST(0x0C, 0x06, SS_RDEF,
+			"Block not compressible") },
+/*      R       */{SST(0x0C, 0x07, SS_RDEF,
+			"Write error - recovery needed") },
+/*      R       */{SST(0x0C, 0x08, SS_RDEF,
+			"Write error - recovery failed") },
+/*      R       */{SST(0x0C, 0x09, SS_RDEF,
+			"Write error - loss of streaming") },
+/*      R       */{SST(0x0C, 0x0A, SS_RDEF,
+			"Write error - padding blocks added") },
+/* D   W  O     */{SST(0x10, 0x00, SS_RDEF,
+			"ID CRC or ECC error") },
+/* DT  WRSO     */{SST(0x11, 0x00, SS_RDEF,
+			"Unrecovered read error") },
+/* DT  W SO     */{SST(0x11, 0x01, SS_RDEF,
+			"Read retries exhausted") },
+/* DT  W SO     */{SST(0x11, 0x02, SS_RDEF,
+			"Error too long to correct") },
+/* DT  W SO     */{SST(0x11, 0x03, SS_RDEF,
+			"Multiple read errors") },
+/* D   W  O     */{SST(0x11, 0x04, SS_RDEF,
+			"Unrecovered read error - auto reallocate failed") },
+/*     WR O     */{SST(0x11, 0x05, SS_RDEF,
+			"L-EC uncorrectable error") },
+/*     WR O     */{SST(0x11, 0x06, SS_RDEF,
+			"CIRC unrecovered error") },
+/*     W  O     */{SST(0x11, 0x07, SS_RDEF,
+			"Data re-synchronization error") },
+/*  T           */{SST(0x11, 0x08, SS_RDEF,
+			"Incomplete block read") },
+/*  T           */{SST(0x11, 0x09, SS_RDEF,
+			"No gap found") },
+/* DT     O     */{SST(0x11, 0x0A, SS_RDEF,
+			"Miscorrected error") },
+/* D   W  O     */{SST(0x11, 0x0B, SS_RDEF,
+			"Unrecovered read error - recommend reassignment") },
+/* D   W  O     */{SST(0x11, 0x0C, SS_RDEF,
+			"Unrecovered read error - recommend rewrite the data")},
+/* DT  WR O     */{SST(0x11, 0x0D, SS_RDEF,
+			"De-compression CRC error") },
+/* DT  WR O     */{SST(0x11, 0x0E, SS_RDEF,
+			"Cannot decompress using declared algorithm") },
+/*      R       */{SST(0x11, 0x0F, SS_RDEF,
+			"Error reading UPC/EAN number") },
+/*      R       */{SST(0x11, 0x10, SS_RDEF,
+			"Error reading ISRC number") },
+/*      R       */{SST(0x11, 0x11, SS_RDEF,
+			"Read error - loss of streaming") },
+/* D   W  O     */{SST(0x12, 0x00, SS_RDEF,
+			"Address mark not found for id field") },
+/* D   W  O     */{SST(0x13, 0x00, SS_RDEF,
+			"Address mark not found for data field") },
+/* DTL WRSO     */{SST(0x14, 0x00, SS_RDEF,
+			"Recorded entity not found") },
+/* DT  WR O     */{SST(0x14, 0x01, SS_RDEF,
+			"Record not found") },
+/*  T           */{SST(0x14, 0x02, SS_RDEF,
+			"Filemark or setmark not found") },
+/*  T           */{SST(0x14, 0x03, SS_RDEF,
+			"End-of-data not found") },
+/*  T           */{SST(0x14, 0x04, SS_RDEF,
+			"Block sequence error") },
+/* DT  W  O     */{SST(0x14, 0x05, SS_RDEF,
+			"Record not found - recommend reassignment") },
+/* DT  W  O     */{SST(0x14, 0x06, SS_RDEF,
+			"Record not found - data auto-reallocated") },
+/* DTL WRSOM    */{SST(0x15, 0x00, SS_RDEF,
+			"Random positioning error") },
+/* DTL WRSOM    */{SST(0x15, 0x01, SS_RDEF,
+			"Mechanical positioning error") },
+/* DT  WR O     */{SST(0x15, 0x02, SS_RDEF,
+			"Positioning error detected by read of medium") },
+/* D   W  O     */{SST(0x16, 0x00, SS_RDEF,
+			"Data synchronization mark error") },
+/* D   W  O     */{SST(0x16, 0x01, SS_RDEF,
+			"Data sync error - data rewritten") },
+/* D   W  O     */{SST(0x16, 0x02, SS_RDEF,
+			"Data sync error - recommend rewrite") },
+/* D   W  O     */{SST(0x16, 0x03, SS_NOP|SSQ_PRINT_SENSE,
+			"Data sync error - data auto-reallocated") },
+/* D   W  O     */{SST(0x16, 0x04, SS_RDEF,
+			"Data sync error - recommend reassignment") },
+/* DT  WRSO     */{SST(0x17, 0x00, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data with no error correction applied") },
+/* DT  WRSO     */{SST(0x17, 0x01, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data with retries") },
+/* DT  WR O     */{SST(0x17, 0x02, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data with positive head offset") },
+/* DT  WR O     */{SST(0x17, 0x03, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data with negative head offset") },
+/*     WR O     */{SST(0x17, 0x04, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data with retries and/or CIRC applied") },
+/* D   WR O     */{SST(0x17, 0x05, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data using previous sector id") },
+/* D   W  O     */{SST(0x17, 0x06, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data without ECC - data auto-reallocated") },
+/* D   W  O     */{SST(0x17, 0x07, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data without ECC - recommend reassignment")},
+/* D   W  O     */{SST(0x17, 0x08, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data without ECC - recommend rewrite") },
+/* D   W  O     */{SST(0x17, 0x09, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data without ECC - data rewritten") },
+/* D   W  O     */{SST(0x18, 0x00, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data with error correction applied") },
+/* D   WR O     */{SST(0x18, 0x01, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data with error corr. & retries applied") },
+/* D   WR O     */{SST(0x18, 0x02, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data - data auto-reallocated") },
+/*      R       */{SST(0x18, 0x03, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data with CIRC") },
+/*      R       */{SST(0x18, 0x04, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data with L-EC") },
+/* D   WR O     */{SST(0x18, 0x05, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data - recommend reassignment") },
+/* D   WR O     */{SST(0x18, 0x06, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data - recommend rewrite") },
+/* D   W  O     */{SST(0x18, 0x07, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data with ECC - data rewritten") },
+/* D      O     */{SST(0x19, 0x00, SS_RDEF,
+			"Defect list error") },
+/* D      O     */{SST(0x19, 0x01, SS_RDEF,
+			"Defect list not available") },
+/* D      O     */{SST(0x19, 0x02, SS_RDEF,
+			"Defect list error in primary list") },
+/* D      O     */{SST(0x19, 0x03, SS_RDEF,
+			"Defect list error in grown list") },
+/* DTLPWRSOMCAE */{SST(0x1A, 0x00, SS_RDEF,
+			"Parameter list length error") },
+/* DTLPWRSOMCAE */{SST(0x1B, 0x00, SS_RDEF,
+			"Synchronous data transfer error") },
+/* D      O     */{SST(0x1C, 0x00, SS_RDEF,
+			"Defect list not found") },
+/* D      O     */{SST(0x1C, 0x01, SS_RDEF,
+			"Primary defect list not found") },
+/* D      O     */{SST(0x1C, 0x02, SS_RDEF,
+			"Grown defect list not found") },
+/* D   W  O     */{SST(0x1D, 0x00, SS_FATAL,
+			"Miscompare during verify operation" )},
+/* D   W  O     */{SST(0x1E, 0x00, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered id with ecc correction") },
+/* D      O     */{SST(0x1F, 0x00, SS_RDEF,
+			"Partial defect list transfer") },
+/* DTLPWRSOMCAE */{SST(0x20, 0x00, SS_FATAL|EINVAL,
+			"Invalid command operation code") },
+/* DT  WR OM    */{SST(0x21, 0x00, SS_FATAL|EINVAL,
+			"Logical block address out of range" )},
+/* DT  WR OM    */{SST(0x21, 0x01, SS_FATAL|EINVAL,
+			"Invalid element address") },
+/* D            */{SST(0x22, 0x00, SS_FATAL|EINVAL,
+			"Illegal function") }, /* Deprecated. Use 20 00, 24 00, or 26 00 instead */
+/* DTLPWRSOMCAE */{SST(0x24, 0x00, SS_FATAL|EINVAL,
+			"Invalid field in CDB") },
+/* DTLPWRSOMCAE */{SST(0x25, 0x00, SS_FATAL|ENXIO,
+			"Logical unit not supported") },
+/* DTLPWRSOMCAE */{SST(0x26, 0x00, SS_FATAL|EINVAL,
+			"Invalid field in parameter list") },
+/* DTLPWRSOMCAE */{SST(0x26, 0x01, SS_FATAL|EINVAL,
+			"Parameter not supported") },
+/* DTLPWRSOMCAE */{SST(0x26, 0x02, SS_FATAL|EINVAL,
+			"Parameter value invalid") },
+/* DTLPWRSOMCAE */{SST(0x26, 0x03, SS_FATAL|EINVAL,
+			"Threshold parameters not supported") },
+/* DTLPWRSOMCAE */{SST(0x26, 0x04, SS_FATAL|EINVAL,
+			"Invalid release of active persistent reservation") },
+/* DT  W  O     */{SST(0x27, 0x00, SS_FATAL|EACCES,
+			"Write protected") },
+/* DT  W  O     */{SST(0x27, 0x01, SS_FATAL|EACCES,
+			"Hardware write protected") },
+/* DT  W  O     */{SST(0x27, 0x02, SS_FATAL|EACCES,
+			"Logical unit software write protected") },
+/*  T           */{SST(0x27, 0x03, SS_FATAL|EACCES,
+			"Associated write protect") },
+/*  T           */{SST(0x27, 0x04, SS_FATAL|EACCES,
+			"Persistent write protect") },
+/*  T           */{SST(0x27, 0x05, SS_FATAL|EACCES,
+			"Permanent write protect") },
+/* DTLPWRSOMCAE */{SST(0x28, 0x00, SS_RDEF,
+			"Not ready to ready change, medium may have changed") },
+/* DTLPWRSOMCAE */{SST(0x28, 0x01, SS_FATAL|ENXIO,
+			"Import or export element accessed") },
+/*
+ * XXX JGibbs - All of these should use the same errno, but I don't think
+ * ENXIO is the correct choice.  Should we borrow from the networking
+ * errnos?  ECONNRESET anyone?
+ */
+/* DTLPWRSOMCAE */{SST(0x29, 0x00, SS_RDEF,
+			"Power on, reset, or bus device reset occurred") },
+/* DTLPWRSOMCAE */{SST(0x29, 0x01, SS_RDEF,
+			"Power on occurred") },
+/* DTLPWRSOMCAE */{SST(0x29, 0x02, SS_RDEF,
+			"Scsi bus reset occurred") },
+/* DTLPWRSOMCAE */{SST(0x29, 0x03, SS_RDEF,
+			"Bus device reset function occurred") },
+/* DTLPWRSOMCAE */{SST(0x29, 0x04, SS_RDEF,
+			"Device internal reset") },
+/* DTLPWRSOMCAE */{SST(0x29, 0x05, SS_RDEF,
+			"Transceiver mode changed to single-ended") },
+/* DTLPWRSOMCAE */{SST(0x29, 0x06, SS_RDEF,
+			"Transceiver mode changed to LVD") },
+/* DTL WRSOMCAE */{SST(0x2A, 0x00, SS_RDEF,
+			"Parameters changed") },
+/* DTL WRSOMCAE */{SST(0x2A, 0x01, SS_RDEF,
+			"Mode parameters changed") },
+/* DTL WRSOMCAE */{SST(0x2A, 0x02, SS_RDEF,
+			"Log parameters changed") },
+/* DTLPWRSOMCAE */{SST(0x2A, 0x03, SS_RDEF,
+			"Reservations preempted") },
+/* DTLPWRSO C   */{SST(0x2B, 0x00, SS_RDEF,
+			"Copy cannot execute since host cannot disconnect") },
+/* DTLPWRSOMCAE */{SST(0x2C, 0x00, SS_RDEF,
+			"Command sequence error") },
+/*       S      */{SST(0x2C, 0x01, SS_RDEF,
+			"Too many windows specified") },
+/*       S      */{SST(0x2C, 0x02, SS_RDEF,
+			"Invalid combination of windows specified") },
+/*      R       */{SST(0x2C, 0x03, SS_RDEF,
+			"Current program area is not empty") },
+/*      R       */{SST(0x2C, 0x04, SS_RDEF,
+			"Current program area is empty") },
+/*  T           */{SST(0x2D, 0x00, SS_RDEF,
+			"Overwrite error on update in place") },
+/* DTLPWRSOMCAE */{SST(0x2F, 0x00, SS_RDEF,
+			"Commands cleared by another initiator") },
+/* DT  WR OM    */{SST(0x30, 0x00, SS_RDEF,
+			"Incompatible medium installed") },
+/* DT  WR O     */{SST(0x30, 0x01, SS_RDEF,
+			"Cannot read medium - unknown format") },
+/* DT  WR O     */{SST(0x30, 0x02, SS_RDEF,
+			"Cannot read medium - incompatible format") },
+/* DT           */{SST(0x30, 0x03, SS_RDEF,
+			"Cleaning cartridge installed") },
+/* DT  WR O     */{SST(0x30, 0x04, SS_RDEF,
+			"Cannot write medium - unknown format") },
+/* DT  WR O     */{SST(0x30, 0x05, SS_RDEF,
+			"Cannot write medium - incompatible format") },
+/* DT  W  O     */{SST(0x30, 0x06, SS_RDEF,
+			"Cannot format medium - incompatible medium") },
+/* DTL WRSOM AE */{SST(0x30, 0x07, SS_RDEF,
+			"Cleaning failure") },
+/*      R       */{SST(0x30, 0x08, SS_RDEF,
+			"Cannot write - application code mismatch") },
+/*      R       */{SST(0x30, 0x09, SS_RDEF,
+			"Current session not fixated for append") },
+/* DT  WR O     */{SST(0x31, 0x00, SS_RDEF,
+			"Medium format corrupted") },
+/* D L  R O     */{SST(0x31, 0x01, SS_RDEF,
+			"Format command failed") },
+/* D   W  O     */{SST(0x32, 0x00, SS_RDEF,
+			"No defect spare location available") },
+/* D   W  O     */{SST(0x32, 0x01, SS_RDEF,
+			"Defect list update failure") },
+/*  T           */{SST(0x33, 0x00, SS_RDEF,
+			"Tape length error") },
+/* DTLPWRSOMCAE */{SST(0x34, 0x00, SS_RDEF,
+			"Enclosure failure") },
+/* DTLPWRSOMCAE */{SST(0x35, 0x00, SS_RDEF,
+			"Enclosure services failure") },
+/* DTLPWRSOMCAE */{SST(0x35, 0x01, SS_RDEF,
+			"Unsupported enclosure function") },
+/* DTLPWRSOMCAE */{SST(0x35, 0x02, SS_RDEF,
+			"Enclosure services unavailable") },
+/* DTLPWRSOMCAE */{SST(0x35, 0x03, SS_RDEF,
+			"Enclosure services transfer failure") },
+/* DTLPWRSOMCAE */{SST(0x35, 0x04, SS_RDEF,
+			"Enclosure services transfer refused") },
+/*   L          */{SST(0x36, 0x00, SS_RDEF,
+			"Ribbon, ink, or toner failure") },
+/* DTL WRSOMCAE */{SST(0x37, 0x00, SS_RDEF,
+			"Rounded parameter") },
+/* DTL WRSOMCAE */{SST(0x39, 0x00, SS_RDEF,
+			"Saving parameters not supported") },
+/* DTL WRSOM    */{SST(0x3A, 0x00, SS_NOP,
+			"Medium not present") },
+/* DT  WR OM    */{SST(0x3A, 0x01, SS_NOP,
+			"Medium not present - tray closed") },
+/* DT  WR OM    */{SST(0x3A, 0x01, SS_NOP,
+			"Medium not present - tray open") },
+/* DT  WR OM    */{SST(0x3A, 0x03, SS_NOP,
+			"Medium not present - Loadable") },
+/* DT  WR OM    */{SST(0x3A, 0x04, SS_NOP,
+			"Medium not present - medium auxiliary "
+			"memory accessible") },
+/* DT  WR OM    */{SST(0x3A, 0xFF, SS_NOP, NULL) },/* Range 0x05->0xFF */
+/*  TL          */{SST(0x3B, 0x00, SS_RDEF,
+			"Sequential positioning error") },
+/*  T           */{SST(0x3B, 0x01, SS_RDEF,
+			"Tape position error at beginning-of-medium") },
+/*  T           */{SST(0x3B, 0x02, SS_RDEF,
+			"Tape position error at end-of-medium") },
+/*   L          */{SST(0x3B, 0x03, SS_RDEF,
+			"Tape or electronic vertical forms unit not ready") },
+/*   L          */{SST(0x3B, 0x04, SS_RDEF,
+			"Slew failure") },
+/*   L          */{SST(0x3B, 0x05, SS_RDEF,
+			"Paper jam") },
+/*   L          */{SST(0x3B, 0x06, SS_RDEF,
+			"Failed to sense top-of-form") },
+/*   L          */{SST(0x3B, 0x07, SS_RDEF,
+			"Failed to sense bottom-of-form") },
+/*  T           */{SST(0x3B, 0x08, SS_RDEF,
+			"Reposition error") },
+/*       S      */{SST(0x3B, 0x09, SS_RDEF,
+			"Read past end of medium") },
+/*       S      */{SST(0x3B, 0x0A, SS_RDEF,
+			"Read past beginning of medium") },
+/*       S      */{SST(0x3B, 0x0B, SS_RDEF,
+			"Position past end of medium") },
+/*  T    S      */{SST(0x3B, 0x0C, SS_RDEF,
+			"Position past beginning of medium") },
+/* DT  WR OM    */{SST(0x3B, 0x0D, SS_FATAL|ENOSPC,
+			"Medium destination element full") },
+/* DT  WR OM    */{SST(0x3B, 0x0E, SS_RDEF,
+			"Medium source element empty") },
+/*      R       */{SST(0x3B, 0x0F, SS_RDEF,
+			"End of medium reached") },
+/* DT  WR OM    */{SST(0x3B, 0x11, SS_RDEF,
+			"Medium magazine not accessible") },
+/* DT  WR OM    */{SST(0x3B, 0x12, SS_RDEF,
+			"Medium magazine removed") },
+/* DT  WR OM    */{SST(0x3B, 0x13, SS_RDEF,
+			"Medium magazine inserted") },
+/* DT  WR OM    */{SST(0x3B, 0x14, SS_RDEF,
+			"Medium magazine locked") },
+/* DT  WR OM    */{SST(0x3B, 0x15, SS_RDEF,
+			"Medium magazine unlocked") },
+/* DTLPWRSOMCAE */{SST(0x3D, 0x00, SS_RDEF,
+			"Invalid bits in identify message") },
+/* DTLPWRSOMCAE */{SST(0x3E, 0x00, SS_RDEF,
+			"Logical unit has not self-configured yet") },
+/* DTLPWRSOMCAE */{SST(0x3E, 0x01, SS_RDEF,
+			"Logical unit failure") },
+/* DTLPWRSOMCAE */{SST(0x3E, 0x02, SS_RDEF,
+			"Timeout on logical unit") },
+/* DTLPWRSOMCAE */{SST(0x3F, 0x00, SS_RDEF,
+			"Target operating conditions have changed") },
+/* DTLPWRSOMCAE */{SST(0x3F, 0x01, SS_RDEF,
+			"Microcode has been changed") },
+/* DTLPWRSOMC   */{SST(0x3F, 0x02, SS_RDEF,
+			"Changed operating definition") },
+/* DTLPWRSOMCAE */{SST(0x3F, 0x03, SS_INQ_REFRESH|SSQ_DECREMENT_COUNT,
+			"Inquiry data has changed") },
+/* DT  WR OMCAE */{SST(0x3F, 0x04, SS_RDEF,
+			"Component device attached") },
+/* DT  WR OMCAE */{SST(0x3F, 0x05, SS_RDEF,
+			"Device identifier changed") },
+/* DT  WR OMCAE */{SST(0x3F, 0x06, SS_RDEF,
+			"Redundancy group created or modified") },
+/* DT  WR OMCAE */{SST(0x3F, 0x07, SS_RDEF,
+			"Redundancy group deleted") },
+/* DT  WR OMCAE */{SST(0x3F, 0x08, SS_RDEF,
+			"Spare created or modified") },
+/* DT  WR OMCAE */{SST(0x3F, 0x09, SS_RDEF,
+			"Spare deleted") },
+/* DT  WR OMCAE */{SST(0x3F, 0x0A, SS_RDEF,
+			"Volume set created or modified") },
+/* DT  WR OMCAE */{SST(0x3F, 0x0B, SS_RDEF,
+			"Volume set deleted") },
+/* DT  WR OMCAE */{SST(0x3F, 0x0C, SS_RDEF,
+			"Volume set deassigned") },
+/* DT  WR OMCAE */{SST(0x3F, 0x0D, SS_RDEF,
+			"Volume set reassigned") },
+/* DTLPWRSOMCAE */{SST(0x3F, 0x0E, SS_RDEF,
+			"Reported luns data has changed") },
+/* DTLPWRSOMCAE */{SST(0x3F, 0x0F, SS_RETRY|SSQ_DECREMENT_COUNT
+				 | SSQ_DELAY_RANDOM|EBUSY,
+			"Echo buffer overwritten") },
+/* DT  WR OM   B*/{SST(0x3F, 0x0F, SS_RDEF, "Medium Loadable") },
+/* DT  WR OM   B*/{SST(0x3F, 0x0F, SS_RDEF,
+			"Medium auxiliary memory accessible") },
+/* D            */{SST(0x40, 0x00, SS_RDEF,
+			"Ram failure") }, /* deprecated - use 40 NN instead */
+/* DTLPWRSOMCAE */{SST(0x40, 0x80, SS_RDEF,
+			"Diagnostic failure: ASCQ = Component ID") },
+/* DTLPWRSOMCAE */{SST(0x40, 0xFF, SS_RDEF|SSQ_RANGE,
+			NULL) },/* Range 0x80->0xFF */
+/* D            */{SST(0x41, 0x00, SS_RDEF,
+			"Data path failure") }, /* deprecated - use 40 NN instead */
+/* D            */{SST(0x42, 0x00, SS_RDEF,
+			"Power-on or self-test failure") }, /* deprecated - use 40 NN instead */
+/* DTLPWRSOMCAE */{SST(0x43, 0x00, SS_RDEF,
+			"Message error") },
+/* DTLPWRSOMCAE */{SST(0x44, 0x00, SS_RDEF,
+			"Internal target failure") },
+/* DTLPWRSOMCAE */{SST(0x45, 0x00, SS_RDEF,
+			"Select or reselect failure") },
+/* DTLPWRSOMC   */{SST(0x46, 0x00, SS_RDEF,
+			"Unsuccessful soft reset") },
+/* DTLPWRSOMCAE */{SST(0x47, 0x00, SS_RDEF|SSQ_FALLBACK,
+			"SCSI parity error") },
+/* DTLPWRSOMCAE */{SST(0x47, 0x01, SS_RDEF|SSQ_FALLBACK,
+			"Data Phase CRC error detected") },
+/* DTLPWRSOMCAE */{SST(0x47, 0x02, SS_RDEF|SSQ_FALLBACK,
+			"SCSI parity error detected during ST data phase") },
+/* DTLPWRSOMCAE */{SST(0x47, 0x03, SS_RDEF|SSQ_FALLBACK,
+			"Information Unit iuCRC error") },
+/* DTLPWRSOMCAE */{SST(0x47, 0x04, SS_RDEF|SSQ_FALLBACK,
+			"Asynchronous information protection error detected") },
+/* DTLPWRSOMCAE */{SST(0x47, 0x05, SS_RDEF|SSQ_FALLBACK,
+			"Protocol server CRC error") },
+/* DTLPWRSOMCAE */{SST(0x48, 0x00, SS_RDEF|SSQ_FALLBACK,
+			"Initiator detected error message received") },
+/* DTLPWRSOMCAE */{SST(0x49, 0x00, SS_RDEF,
+			"Invalid message error") },
+/* DTLPWRSOMCAE */{SST(0x4A, 0x00, SS_RDEF,
+			"Command phase error") },
+/* DTLPWRSOMCAE */{SST(0x4B, 0x00, SS_RDEF,
+			"Data phase error") },
+/* DTLPWRSOMCAE */{SST(0x4C, 0x00, SS_RDEF,
+			"Logical unit failed self-configuration") },
+/* DTLPWRSOMCAE */{SST(0x4D, 0x00, SS_RDEF,
+			"Tagged overlapped commands: ASCQ = Queue tag ID") },
+/* DTLPWRSOMCAE */{SST(0x4D, 0xFF, SS_RDEF|SSQ_RANGE,
+			NULL)}, /* Range 0x00->0xFF */
+/* DTLPWRSOMCAE */{SST(0x4E, 0x00, SS_RDEF,
+			"Overlapped commands attempted") },
+/*  T           */{SST(0x50, 0x00, SS_RDEF,
+			"Write append error") },
+/*  T           */{SST(0x50, 0x01, SS_RDEF,
+			"Write append position error") },
+/*  T           */{SST(0x50, 0x02, SS_RDEF,
+			"Position error related to timing") },
+/*  T     O     */{SST(0x51, 0x00, SS_RDEF,
+			"Erase failure") },
+/*  T           */{SST(0x52, 0x00, SS_RDEF,
+			"Cartridge fault") },
+/* DTL WRSOM    */{SST(0x53, 0x00, SS_RDEF,
+			"Media load or eject failed") },
+/*  T           */{SST(0x53, 0x01, SS_RDEF,
+			"Unload tape failure") },
+/* DT  WR OM    */{SST(0x53, 0x02, SS_RDEF,
+			"Medium removal prevented") },
+/*    P         */{SST(0x54, 0x00, SS_RDEF,
+			"Scsi to host system interface failure") },
+/*    P         */{SST(0x55, 0x00, SS_RDEF,
+			"System resource failure") },
+/* D      O     */{SST(0x55, 0x01, SS_FATAL|ENOSPC,
+			"System buffer full") },
+/*      R       */{SST(0x57, 0x00, SS_RDEF,
+			"Unable to recover table-of-contents") },
+/*        O     */{SST(0x58, 0x00, SS_RDEF,
+			"Generation does not exist") },
+/*        O     */{SST(0x59, 0x00, SS_RDEF,
+			"Updated block read") },
+/* DTLPWRSOM    */{SST(0x5A, 0x00, SS_RDEF,
+			"Operator request or state change input") },
+/* DT  WR OM    */{SST(0x5A, 0x01, SS_RDEF,
+			"Operator medium removal request") },
+/* DT  W  O     */{SST(0x5A, 0x02, SS_RDEF,
+			"Operator selected write protect") },
+/* DT  W  O     */{SST(0x5A, 0x03, SS_RDEF,
+			"Operator selected write permit") },
+/* DTLPWRSOM    */{SST(0x5B, 0x00, SS_RDEF,
+			"Log exception") },
+/* DTLPWRSOM    */{SST(0x5B, 0x01, SS_RDEF,
+			"Threshold condition met") },
+/* DTLPWRSOM    */{SST(0x5B, 0x02, SS_RDEF,
+			"Log counter at maximum") },
+/* DTLPWRSOM    */{SST(0x5B, 0x03, SS_RDEF,
+			"Log list codes exhausted") },
+/* D      O     */{SST(0x5C, 0x00, SS_RDEF,
+			"RPL status change") },
+/* D      O     */{SST(0x5C, 0x01, SS_NOP|SSQ_PRINT_SENSE,
+			"Spindles synchronized") },
+/* D      O     */{SST(0x5C, 0x02, SS_RDEF,
+			"Spindles not synchronized") },
+/* DTLPWRSOMCAE */{SST(0x5D, 0x00, SS_RDEF,
+			"Failure prediction threshold exceeded") },
+/* DTLPWRSOMCAE */{SST(0x5D, 0xFF, SS_RDEF,
+			"Failure prediction threshold exceeded (false)") },
+/* DTLPWRSO CA  */{SST(0x5E, 0x00, SS_RDEF,
+			"Low power condition on") },
+/* DTLPWRSO CA  */{SST(0x5E, 0x01, SS_RDEF,
+			"Idle condition activated by timer") },
+/* DTLPWRSO CA  */{SST(0x5E, 0x02, SS_RDEF,
+			"Standby condition activated by timer") },
+/* DTLPWRSO CA  */{SST(0x5E, 0x03, SS_RDEF,
+			"Idle condition activated by command") },
+/* DTLPWRSO CA  */{SST(0x5E, 0x04, SS_RDEF,
+			"Standby condition activated by command") },
+/*       S      */{SST(0x60, 0x00, SS_RDEF,
+			"Lamp failure") },
+/*       S      */{SST(0x61, 0x00, SS_RDEF,
+			"Video acquisition error") },
+/*       S      */{SST(0x61, 0x01, SS_RDEF,
+			"Unable to acquire video") },
+/*       S      */{SST(0x61, 0x02, SS_RDEF,
+			"Out of focus") },
+/*       S      */{SST(0x62, 0x00, SS_RDEF,
+			"Scan head positioning error") },
+/*      R       */{SST(0x63, 0x00, SS_RDEF,
+			"End of user area encountered on this track") },
+/*      R       */{SST(0x63, 0x01, SS_FATAL|ENOSPC,
+			"Packet does not fit in available space") },
+/*      R       */{SST(0x64, 0x00, SS_RDEF,
+			"Illegal mode for this track") },
+/*      R       */{SST(0x64, 0x01, SS_RDEF,
+			"Invalid packet size") },
+/* DTLPWRSOMCAE */{SST(0x65, 0x00, SS_RDEF,
+			"Voltage fault") },
+/*       S      */{SST(0x66, 0x00, SS_RDEF,
+			"Automatic document feeder cover up") },
+/*       S      */{SST(0x66, 0x01, SS_RDEF,
+			"Automatic document feeder lift up") },
+/*       S      */{SST(0x66, 0x02, SS_RDEF,
+			"Document jam in automatic document feeder") },
+/*       S      */{SST(0x66, 0x03, SS_RDEF,
+			"Document miss feed automatic in document feeder") },
+/*           A  */{SST(0x67, 0x00, SS_RDEF,
+			"Configuration failure") },
+/*           A  */{SST(0x67, 0x01, SS_RDEF,
+			"Configuration of incapable logical units failed") },
+/*           A  */{SST(0x67, 0x02, SS_RDEF,
+			"Add logical unit failed") },
+/*           A  */{SST(0x67, 0x03, SS_RDEF,
+			"Modification of logical unit failed") },
+/*           A  */{SST(0x67, 0x04, SS_RDEF,
+			"Exchange of logical unit failed") },
+/*           A  */{SST(0x67, 0x05, SS_RDEF,
+			"Remove of logical unit failed") },
+/*           A  */{SST(0x67, 0x06, SS_RDEF,
+			"Attachment of logical unit failed") },
+/*           A  */{SST(0x67, 0x07, SS_RDEF,
+			"Creation of logical unit failed") },
+/*           A  */{SST(0x68, 0x00, SS_RDEF,
+			"Logical unit not configured") },
+/*           A  */{SST(0x69, 0x00, SS_RDEF,
+			"Data loss on logical unit") },
+/*           A  */{SST(0x69, 0x01, SS_RDEF,
+			"Multiple logical unit failures") },
+/*           A  */{SST(0x69, 0x02, SS_RDEF,
+			"Parity/data mismatch") },
+/*           A  */{SST(0x6A, 0x00, SS_RDEF,
+			"Informational, refer to log") },
+/*           A  */{SST(0x6B, 0x00, SS_RDEF,
+			"State change has occurred") },
+/*           A  */{SST(0x6B, 0x01, SS_RDEF,
+			"Redundancy level got better") },
+/*           A  */{SST(0x6B, 0x02, SS_RDEF,
+			"Redundancy level got worse") },
+/*           A  */{SST(0x6C, 0x00, SS_RDEF,
+			"Rebuild failure occurred") },
+/*           A  */{SST(0x6D, 0x00, SS_RDEF,
+			"Recalculate failure occurred") },
+/*           A  */{SST(0x6E, 0x00, SS_RDEF,
+			"Command to logical unit failed") },
+/*  T           */{SST(0x70, 0x00, SS_RDEF,
+			"Decompression exception short: ASCQ = Algorithm ID") },
+/*  T           */{SST(0x70, 0xFF, SS_RDEF|SSQ_RANGE,
+			NULL) }, /* Range 0x00 -> 0xFF */
+/*  T           */{SST(0x71, 0x00, SS_RDEF,
+			"Decompression exception long: ASCQ = Algorithm ID") },
+/*  T           */{SST(0x71, 0xFF, SS_RDEF|SSQ_RANGE,
+			NULL) }, /* Range 0x00 -> 0xFF */	
+/*      R       */{SST(0x72, 0x00, SS_RDEF,
+			"Session fixation error") },
+/*      R       */{SST(0x72, 0x01, SS_RDEF,
+			"Session fixation error writing lead-in") },
+/*      R       */{SST(0x72, 0x02, SS_RDEF,
+			"Session fixation error writing lead-out") },
+/*      R       */{SST(0x72, 0x03, SS_RDEF,
+			"Session fixation error - incomplete track in session") },
+/*      R       */{SST(0x72, 0x04, SS_RDEF,
+			"Empty or partially written reserved track") },
+/*      R       */{SST(0x73, 0x00, SS_RDEF,
+			"CD control error") },
+/*      R       */{SST(0x73, 0x01, SS_RDEF,
+			"Power calibration area almost full") },
+/*      R       */{SST(0x73, 0x02, SS_FATAL|ENOSPC,
+			"Power calibration area is full") },
+/*      R       */{SST(0x73, 0x03, SS_RDEF,
+			"Power calibration area error") },
+/*      R       */{SST(0x73, 0x04, SS_RDEF,
+			"Program memory area update failure") },
+/*      R       */{SST(0x73, 0x05, SS_RDEF,
+			"program memory area is full") }
+};
+
+static const int asc_table_size = sizeof(asc_table)/sizeof(asc_table[0]);
+
+struct asc_key
+{
+	int asc;
+	int ascq;
+};
+
+static int
+ascentrycomp(const void *key, const void *member)
+{
+	int asc;
+	int ascq;
+	const struct asc_table_entry *table_entry;
+
+	asc = ((const struct asc_key *)key)->asc;
+	ascq = ((const struct asc_key *)key)->ascq;
+	table_entry = (const struct asc_table_entry *)member;
+
+	if (asc >= table_entry->asc) {
+
+		if (asc > table_entry->asc)
+			return (1);
+
+		if (ascq <= table_entry->ascq) {
+			/* Check for ranges */
+			if (ascq == table_entry->ascq
+		 	 || ((table_entry->action & SSQ_RANGE) != 0
+		  	   && ascq >= (table_entry - 1)->ascq))
+				return (0);
+			return (-1);
+		}
+		return (1);
+	}
+	return (-1);
+}
+
+static int
+senseentrycomp(const void *key, const void *member)
+{
+	int sense_key;
+	const struct sense_key_table_entry *table_entry;
+
+	sense_key = *((const int *)key);
+	table_entry = (const struct sense_key_table_entry *)member;
+
+	if (sense_key >= table_entry->sense_key) {
+		if (sense_key == table_entry->sense_key)
+			return (0);
+		return (1);
+	}
+	return (-1);
+}
+
+static void
+fetchtableentries(int sense_key, int asc, int ascq,
+		  struct scsi_inquiry_data *inq_data,
+		  const struct sense_key_table_entry **sense_entry,
+		  const struct asc_table_entry **asc_entry)
+{
+	void *match;
+	const struct asc_table_entry *asc_tables[2];
+	const struct sense_key_table_entry *sense_tables[2];
+	struct asc_key asc_ascq;
+	size_t asc_tables_size[2];
+	size_t sense_tables_size[2];
+	int num_asc_tables;