Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (40 commits)
  [SCSI] jazz_esp, sgiwd93, sni_53c710, sun3x_esp: fix platform driver hotplug/coldplug
  [SCSI] aic7xxx: add const
  [SCSI] aic7xxx: add static
  [SCSI] aic7xxx: Update _shipped files
  [SCSI] aic7xxx: teach aicasm to not emit unused debug code/data
  [SCSI] qla2xxx: Update version number to 8.02.01-k2.
  [SCSI] qla2xxx: Correct regression in relogin code.
  [SCSI] qla2xxx: Correct misc. endian and byte-ordering issues.
  [SCSI] qla2xxx: make qla2x00_issue_iocb_timeout() static
  [SCSI] qla2xxx: qla_os.c, make 2 functions static
  [SCSI] qla2xxx: Re-register FDMI information after a LIP.
  [SCSI] qla2xxx: Correct SRB usage-after-completion/free issues.
  [SCSI] qla2xxx: Correct ISP84XX verify-chip response handling.
  [SCSI] qla2xxx: Wakeup DPC thread to process any deferred-work requests.
  [SCSI] qla2xxx: Collapse RISC-RAM retrieval code during a firmware-dump.
  [SCSI] m68k: new mac_esp scsi driver
  [SCSI] zfcp: Add some statistics provided by the FCP adapter to the sysfs
  [SCSI] zfcp: Print some messages only during ERP
  [SCSI] zfcp: Wait for free SBAL during exchange config
  [SCSI] scsi_transport_fc: fc_user_scan correction
  ...

1 files changed, 168 insertions, 13 deletions

diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 0081aa357c8..0f829b3b8ab 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -193,7 +193,7 @@ struct ahd_linux_iocell_opts
 #define AIC79XX_PRECOMP_INDEX	0
 #define AIC79XX_SLEWRATE_INDEX	1
 #define AIC79XX_AMPLITUDE_INDEX	2
-static struct ahd_linux_iocell_opts aic79xx_iocell_info[] =
+static const struct ahd_linux_iocell_opts aic79xx_iocell_info[] =
 {
 	AIC79XX_DEFAULT_IOOPTS,
 	AIC79XX_DEFAULT_IOOPTS,
@@ -369,10 +369,167 @@ static void ahd_release_simq(struct ahd_softc *ahd);
 static int ahd_linux_unit;
 
 
+/************************** OS Utility Wrappers *******************************/
+void ahd_delay(long);
+void
+ahd_delay(long usec)
+{
+	/*
+	 * udelay on Linux can have problems for
+	 * multi-millisecond waits.  Wait at most
+	 * 1024us per call.
+	 */
+	while (usec > 0) {
+		udelay(usec % 1024);
+		usec -= 1024;
+	}
+}
+
+
+/***************************** Low Level I/O **********************************/
+uint8_t ahd_inb(struct ahd_softc * ahd, long port);
+void ahd_outb(struct ahd_softc * ahd, long port, uint8_t val);
+void ahd_outw_atomic(struct ahd_softc * ahd,
+				     long port, uint16_t val);
+void ahd_outsb(struct ahd_softc * ahd, long port,
+			       uint8_t *, int count);
+void ahd_insb(struct ahd_softc * ahd, long port,
+			       uint8_t *, int count);
+
+uint8_t
+ahd_inb(struct ahd_softc * ahd, long port)
+{
+	uint8_t x;
+
+	if (ahd->tags[0] == BUS_SPACE_MEMIO) {
+		x = readb(ahd->bshs[0].maddr + port);
+	} else {
+		x = inb(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
+	}
+	mb();
+	return (x);
+}
+
+#if 0 /* unused */
+static uint16_t
+ahd_inw_atomic(struct ahd_softc * ahd, long port)
+{
+	uint8_t x;
+
+	if (ahd->tags[0] == BUS_SPACE_MEMIO) {
+		x = readw(ahd->bshs[0].maddr + port);
+	} else {
+		x = inw(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
+	}
+	mb();
+	return (x);
+}
+#endif
+
+void
+ahd_outb(struct ahd_softc * ahd, long port, uint8_t val)
+{
+	if (ahd->tags[0] == BUS_SPACE_MEMIO) {
+		writeb(val, ahd->bshs[0].maddr + port);
+	} else {
+		outb(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
+	}
+	mb();
+}
+
+void
+ahd_outw_atomic(struct ahd_softc * ahd, long port, uint16_t val)
+{
+	if (ahd->tags[0] == BUS_SPACE_MEMIO) {
+		writew(val, ahd->bshs[0].maddr + port);
+	} else {
+		outw(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
+	}
+	mb();
+}
+
+void
+ahd_outsb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
+{
+	int i;
+
+	/*
+	 * There is probably a more efficient way to do this on Linux
+	 * but we don't use this for anything speed critical and this
+	 * should work.
+	 */
+	for (i = 0; i < count; i++)
+		ahd_outb(ahd, port, *array++);
+}
+
+void
+ahd_insb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
+{
+	int i;
+
+	/*
+	 * There is probably a more efficient way to do this on Linux
+	 * but we don't use this for anything speed critical and this
+	 * should work.
+	 */
+	for (i = 0; i < count; i++)
+		*array++ = ahd_inb(ahd, port);
+}
+
+/******************************* PCI Routines *********************************/
+uint32_t
+ahd_pci_read_config(ahd_dev_softc_t pci, int reg, int width)
+{
+	switch (width) {
+	case 1:
+	{
+		uint8_t retval;
+
+		pci_read_config_byte(pci, reg, &retval);
+		return (retval);
+	}
+	case 2:
+	{
+		uint16_t retval;
+		pci_read_config_word(pci, reg, &retval);
+		return (retval);
+	}
+	case 4:
+	{
+		uint32_t retval;
+		pci_read_config_dword(pci, reg, &retval);
+		return (retval);
+	}
+	default:
+		panic("ahd_pci_read_config: Read size too big");
+		/* NOTREACHED */
+		return (0);
+	}
+}
+
+void
+ahd_pci_write_config(ahd_dev_softc_t pci, int reg, uint32_t value, int width)
+{
+	switch (width) {
+	case 1:
+		pci_write_config_byte(pci, reg, value);
+		break;
+	case 2:
+		pci_write_config_word(pci, reg, value);
+		break;
+	case 4:
+		pci_write_config_dword(pci, reg, value);
+		break;
+	default:
+		panic("ahd_pci_write_config: Write size too big");
+		/* NOTREACHED */
+	}
+}
+
 /****************************** Inlines ***************************************/
-static __inline void ahd_linux_unmap_scb(struct ahd_softc*, struct scb*);
+static void ahd_linux_unmap_scb(struct ahd_softc*, struct scb*);
 
-static __inline void
+static void
 ahd_linux_unmap_scb(struct ahd_softc *ahd, struct scb *scb)
 {
 	struct scsi_cmnd *cmd;
@@ -400,13 +557,11 @@ ahd_linux_info(struct Scsi_Host *host)
 	bp = &buffer[0];
 	ahd = *(struct ahd_softc **)host->hostdata;
 	memset(bp, 0, sizeof(buffer));
-	strcpy(bp, "Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev ");
-	strcat(bp, AIC79XX_DRIVER_VERSION);
-	strcat(bp, "\n");
-	strcat(bp, "        <");
+	strcpy(bp, "Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev " AIC79XX_DRIVER_VERSION "\n"
+			"        <");
 	strcat(bp, ahd->description);
-	strcat(bp, ">\n");
-	strcat(bp, "        ");
+	strcat(bp, ">\n"
+			"        ");
 	ahd_controller_info(ahd, ahd_info);
 	strcat(bp, ahd_info);
 
@@ -432,7 +587,7 @@ ahd_linux_queue(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
 	return rtn;
 }
 
-static inline struct scsi_target **
+static struct scsi_target **
 ahd_linux_target_in_softc(struct scsi_target *starget)
 {
 	struct	ahd_softc *ahd =
@@ -991,7 +1146,7 @@ aic79xx_setup(char *s)
 	char   *p;
 	char   *end;
 
-	static struct {
+	static const struct {
 		const char *name;
 		uint32_t *flag;
 	} options[] = {
@@ -1223,7 +1378,7 @@ ahd_platform_init(struct ahd_softc *ahd)
 	 * Lookup and commit any modified IO Cell options.
 	 */
 	if (ahd->unit < ARRAY_SIZE(aic79xx_iocell_info)) {
-		struct ahd_linux_iocell_opts *iocell_opts;
+		const struct ahd_linux_iocell_opts *iocell_opts;
 
 		iocell_opts = &aic79xx_iocell_info[ahd->unit];
 		if (iocell_opts->precomp != AIC79XX_DEFAULT_PRECOMP)
@@ -2613,7 +2768,7 @@ static void ahd_linux_set_pcomp_en(struct scsi_target *starget, int pcomp)
 		uint8_t precomp;
 
 		if (ahd->unit < ARRAY_SIZE(aic79xx_iocell_info)) {
-			struct ahd_linux_iocell_opts *iocell_opts;
+			const struct ahd_linux_iocell_opts *iocell_opts;
 
 			iocell_opts = &aic79xx_iocell_info[ahd->unit];
 			precomp = iocell_opts->precomp;