Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1110 insertions, 0 deletions

diff --git a/drivers/scsi/NCR53c406a.c b/drivers/scsi/NCR53c406a.c
new file mode 100644
index 00000000000..c685d546f83
--- /dev/null
+++ b/drivers/scsi/NCR53c406a.c
@@ -0,0 +1,1110 @@
+/* 
+ *  NCR53c406.c
+ *  Low-level SCSI driver for NCR53c406a chip.
+ *  Copyright (C) 1994, 1995, 1996 Normunds Saumanis (normunds@fi.ibm.com)
+ * 
+ *  LILO command line usage: ncr53c406a=<PORTBASE>[,<IRQ>[,<FASTPIO>]]
+ *  Specify IRQ = 0 for non-interrupt driven mode.
+ *  FASTPIO = 1 for fast pio mode, 0 for slow mode.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2, or (at your option) any
+ *  later version.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ */
+
+#define NCR53C406A_DEBUG 0
+#define VERBOSE_NCR53C406A_DEBUG 0
+
+/* Set this to 1 for PIO mode (recommended) or to 0 for DMA mode */
+#define USE_PIO 1
+
+#define USE_BIOS 0
+				/* #define BIOS_ADDR 0xD8000 *//* define this if autoprobe fails */
+				/* #define PORT_BASE 0x330 *//* define this if autoprobe fails */
+				/* #define IRQ_LEV   0	*//* define this if autoprobe fails */
+#define DMA_CHAN  5		/* this is ignored if DMA is disabled */
+
+/* Set this to 0 if you encounter kernel lockups while transferring 
+ * data in PIO mode */
+#define USE_FAST_PIO 1
+
+/* ============= End of user configurable parameters ============= */
+
+#include <linux/module.h>
+
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/stat.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+
+#include <linux/blkdev.h>
+#include <linux/spinlock.h>
+#include "scsi.h"
+#include <scsi/scsi_host.h>
+
+/* ============================================================= */
+
+#define WATCHDOG 5000000
+
+#define SYNC_MODE 0		/* Synchronous transfer mode */
+
+#if DEBUG
+#undef NCR53C406A_DEBUG
+#define NCR53C406A_DEBUG 1
+#endif
+
+#if USE_PIO
+#define USE_DMA 0
+#else
+#define USE_DMA 1
+#endif
+
+/* Default configuration */
+#define C1_IMG   0x07		/* ID=7 */
+#define C2_IMG   0x48		/* FE SCSI2 */
+#if USE_DMA
+#define C3_IMG   0x21		/* CDB TE */
+#else
+#define C3_IMG   0x20		/* CDB */
+#endif
+#define C4_IMG   0x04		/* ANE */
+#define C5_IMG   0xb6		/* AA PI SIE POL */
+
+#define REG0 (outb(C4_IMG, CONFIG4))
+#define REG1 (outb(C5_IMG, CONFIG5))
+
+#if NCR53C406A_DEBUG
+#define DEB(x) x
+#else
+#define DEB(x)
+#endif
+
+#if VERBOSE_NCR53C406A_DEBUG
+#define VDEB(x) x
+#else
+#define VDEB(x)
+#endif
+
+#define LOAD_DMA_COUNT(count) \
+  outb(count & 0xff, TC_LSB); \
+  outb((count >> 8) & 0xff, TC_MSB); \
+  outb((count >> 16) & 0xff, TC_HIGH);
+
+/* Chip commands */
+#define DMA_OP               0x80
+
+#define SCSI_NOP             0x00
+#define FLUSH_FIFO           0x01
+#define CHIP_RESET           0x02
+#define SCSI_RESET           0x03
+#define RESELECT             0x40
+#define SELECT_NO_ATN        0x41
+#define SELECT_ATN           0x42
+#define SELECT_ATN_STOP      0x43
+#define ENABLE_SEL           0x44
+#define DISABLE_SEL          0x45
+#define SELECT_ATN3          0x46
+#define RESELECT3            0x47
+#define TRANSFER_INFO        0x10
+#define INIT_CMD_COMPLETE    0x11
+#define MSG_ACCEPT           0x12
+#define TRANSFER_PAD         0x18
+#define SET_ATN              0x1a
+#define RESET_ATN            0x1b
+#define SEND_MSG             0x20
+#define SEND_STATUS          0x21
+#define SEND_DATA            0x22
+#define DISCONN_SEQ          0x23
+#define TERMINATE_SEQ        0x24
+#define TARG_CMD_COMPLETE    0x25
+#define DISCONN              0x27
+#define RECV_MSG             0x28
+#define RECV_CMD             0x29
+#define RECV_DATA            0x2a
+#define RECV_CMD_SEQ         0x2b
+#define TARGET_ABORT_DMA     0x04
+
+/*----------------------------------------------------------------*/
+/* the following will set the monitor border color (useful to find
+   where something crashed or gets stuck at */
+/* 1 = blue
+   2 = green
+   3 = cyan
+   4 = red
+   5 = magenta
+   6 = yellow
+   7 = white
+*/
+
+#if NCR53C406A_DEBUG
+#define rtrc(i) {inb(0x3da);outb(0x31,0x3c0);outb((i),0x3c0);}
+#else
+#define rtrc(i) {}
+#endif
+/*----------------------------------------------------------------*/
+
+enum Phase {
+	idle,
+	data_out,
+	data_in,
+	command_ph,
+	status_ph,
+	message_out,
+	message_in
+};
+
+/* Static function prototypes */
+static void NCR53c406a_intr(int, void *, struct pt_regs *);
+static irqreturn_t do_NCR53c406a_intr(int, void *, struct pt_regs *);
+static void chip_init(void);
+static void calc_port_addr(void);
+#ifndef IRQ_LEV
+static int irq_probe(void);
+#endif
+
+/* ================================================================= */
+
+#if USE_BIOS
+static void *bios_base;
+#endif
+
+#if PORT_BASE
+static int port_base = PORT_BASE;
+#else
+static int port_base;
+#endif
+
+#if IRQ_LEV
+static int irq_level = IRQ_LEV;
+#else
+static int irq_level = -1;	/* 0 is 'no irq', so use -1 for 'uninitialized' */
+#endif
+
+#if USE_DMA
+static int dma_chan;
+#endif
+
+#if USE_PIO
+static int fast_pio = USE_FAST_PIO;
+#endif
+
+static Scsi_Cmnd *current_SC;
+static char info_msg[256];
+
+/* ================================================================= */
+
+/* possible BIOS locations */
+#if USE_BIOS
+static void *addresses[] = {
+	(void *) 0xd8000,
+	(void *) 0xc8000
+};
+#define ADDRESS_COUNT (sizeof( addresses ) / sizeof( unsigned ))
+#endif				/* USE_BIOS */
+
+/* possible i/o port addresses */
+static unsigned short ports[] = { 0x230, 0x330, 0x280, 0x290, 0x330, 0x340, 0x300, 0x310, 0x348, 0x350 };
+#define PORT_COUNT (sizeof( ports ) / sizeof( unsigned short ))
+
+/* possible interrupt channels */
+static unsigned short intrs[] = { 10, 11, 12, 15 };
+#define INTR_COUNT (sizeof( intrs ) / sizeof( unsigned short ))
+
+/* signatures for NCR 53c406a based controllers */
+#if USE_BIOS
+struct signature {
+	char *signature;
+	int sig_offset;
+	int sig_length;
+} signatures[] __initdata = {
+	/*          1         2         3         4         5         6 */
+	/* 123456789012345678901234567890123456789012345678901234567890 */
+	{
+"Copyright (C) Acculogic, Inc.\r\n2.8M Diskette Extension Bios ver 4.04.03 03/01/1993", 61, 82},};
+
+#define SIGNATURE_COUNT (sizeof( signatures ) / sizeof( struct signature ))
+#endif				/* USE_BIOS */
+
+/* ============================================================ */
+
+/* Control Register Set 0 */
+static int TC_LSB;		/* transfer counter lsb         */
+static int TC_MSB;		/* transfer counter msb */
+static int SCSI_FIFO;		/* scsi fifo register   */
+static int CMD_REG;		/* command register             */
+static int STAT_REG;		/* status register              */
+static int DEST_ID;		/* selection/reselection bus id */
+static int INT_REG;		/* interrupt status register    */
+static int SRTIMOUT;		/* select/reselect timeout reg  */
+static int SEQ_REG;		/* sequence step register       */
+static int SYNCPRD;		/* synchronous transfer period  */
+static int FIFO_FLAGS;		/* indicates # of bytes in fifo */
+static int SYNCOFF;		/* synchronous offset register  */
+static int CONFIG1;		/* configuration register       */
+static int CLKCONV;		/* clock conversion reg */
+				/*static int TESTREG;*//* test mode register           */
+static int CONFIG2;		/* Configuration 2 Register     */
+static int CONFIG3;		/* Configuration 3 Register     */
+static int CONFIG4;		/* Configuration 4 Register     */
+static int TC_HIGH;		/* Transfer Counter High */
+				/*static int FIFO_BOTTOM;*//* Reserve FIFO byte register   */
+
+/* Control Register Set 1 */
+				/*static int JUMPER_SENSE;*//* Jumper sense port reg (r/w) */
+				/*static int SRAM_PTR;*//* SRAM address pointer reg (r/w) */
+				/*static int SRAM_DATA;*//* SRAM data register (r/w) */
+static int PIO_FIFO;		/* PIO FIFO registers (r/w) */
+				/*static int PIO_FIFO1;*//*  */
+				/*static int PIO_FIFO2;*//*  */
+				/*static int PIO_FIFO3;*//*  */
+static int PIO_STATUS;		/* PIO status (r/w) */
+				/*static int ATA_CMD;*//* ATA command/status reg (r/w) */
+				/*static int ATA_ERR;*//* ATA features/error register (r/w) */
+static int PIO_FLAG;		/* PIO flag interrupt enable (r/w) */
+static int CONFIG5;		/* Configuration 5 register (r/w) */
+				/*static int SIGNATURE;*//* Signature Register (r) */
+				/*static int CONFIG6;*//* Configuration 6 register (r) */
+
+/* ============================================================== */
+
+#if USE_DMA
+static __inline__ int NCR53c406a_dma_setup(unsigned char *ptr, unsigned int count, unsigned char mode)
+{
+	unsigned limit;
+	unsigned long flags = 0;
+
+	VDEB(printk("dma: before count=%d   ", count));
+	if (dma_chan <= 3) {
+		if (count > 65536)
+			count = 65536;
+		limit = 65536 - (((unsigned) ptr) & 0xFFFF);
+	} else {
+		if (count > (65536 << 1))
+			count = (65536 << 1);
+		limit = (65536 << 1) - (((unsigned) ptr) & 0x1FFFF);
+	}
+
+	if (count > limit)
+		count = limit;
+
+	VDEB(printk("after count=%d\n", count));
+	if ((count & 1) || (((unsigned) ptr) & 1))
+		panic("NCR53c406a: attempted unaligned DMA transfer\n");
+
+	flags = claim_dma_lock();
+	disable_dma(dma_chan);
+	clear_dma_ff(dma_chan);
+	set_dma_addr(dma_chan, (long) ptr);
+	set_dma_count(dma_chan, count);
+	set_dma_mode(dma_chan, mode);
+	enable_dma(dma_chan);
+	release_dma_lock(flags);
+
+	return count;
+}
+
+static __inline__ int NCR53c406a_dma_write(unsigned char *src, unsigned int count)
+{
+	return NCR53c406a_dma_setup(src, count, DMA_MODE_WRITE);
+}
+
+static __inline__ int NCR53c406a_dma_read(unsigned char *src, unsigned int count)
+{
+	return NCR53c406a_dma_setup(src, count, DMA_MODE_READ);
+}
+
+static __inline__ int NCR53c406a_dma_residual(void)
+{
+	register int tmp;
+	unsigned long flags;
+
+	flags = claim_dma_lock();
+	clear_dma_ff(dma_chan);
+	tmp = get_dma_residue(dma_chan);
+	release_dma_lock(flags);
+
+	return tmp;
+}
+#endif				/* USE_DMA */
+
+#if USE_PIO
+static __inline__ int NCR53c406a_pio_read(unsigned char *request, unsigned int reqlen)
+{
+	int i;
+	int len;		/* current scsi fifo size */
+
+	REG1;
+	while (reqlen) {
+		i = inb(PIO_STATUS);
+		/*    VDEB(printk("pio_status=%x\n", i)); */
+		if (i & 0x80)
+			return 0;
+
+		switch (i & 0x1e) {
+		default:
+		case 0x10:
+			len = 0;
+			break;
+		case 0x0:
+			len = 1;
+			break;
+		case 0x8:
+			len = 42;
+			break;
+		case 0xc:
+			len = 84;
+			break;
+		case 0xe:
+			len = 128;
+			break;
+		}
+
+		if ((i & 0x40) && len == 0) {	/* fifo empty and interrupt occurred */
+			return 0;
+		}
+
+		if (len) {
+			if (len > reqlen)
+				len = reqlen;
+
+			if (fast_pio && len > 3) {
+				insl(PIO_FIFO, request, len >> 2);
+				request += len & 0xfc;
+				reqlen -= len & 0xfc;
+			} else {
+				while (len--) {
+					*request++ = inb(PIO_FIFO);
+					reqlen--;
+				}
+			}
+		}
+	}
+	return 0;
+}
+
+static __inline__ int NCR53c406a_pio_write(unsigned char *request, unsigned int reqlen)
+{
+	int i = 0;
+	int len;		/* current scsi fifo size */
+
+	REG1;
+	while (reqlen && !(i & 0x40)) {
+		i = inb(PIO_STATUS);
+		/*    VDEB(printk("pio_status=%x\n", i)); */
+		if (i & 0x80)	/* error */
+			return 0;
+
+		switch (i & 0x1e) {
+		case 0x10:
+			len = 128;
+			break;
+		case 0x0:
+			len = 84;
+			break;
+		case 0x8:
+			len = 42;
+			break;
+		case 0xc:
+			len = 1;
+			break;
+		default:
+		case 0xe:
+			len = 0;
+			break;
+		}
+
+		if (len) {
+			if (len > reqlen)
+				len = reqlen;
+
+			if (fast_pio && len > 3) {
+				outsl(PIO_FIFO, request, len >> 2);
+				request += len & 0xfc;
+				reqlen -= len & 0xfc;
+			} else {
+				while (len--) {
+					outb(*request++, PIO_FIFO);
+					reqlen--;
+				}
+			}
+		}
+	}
+	return 0;
+}
+#endif				/* USE_PIO */
+
+static int __init NCR53c406a_detect(Scsi_Host_Template * tpnt)
+{
+	int present = 0;
+	struct Scsi_Host *shpnt = NULL;
+#ifndef PORT_BASE
+	int i;
+#endif
+
+#if USE_BIOS
+	int ii, jj;
+	bios_base = 0;
+	/* look for a valid signature */
+	for (ii = 0; ii < ADDRESS_COUNT && !bios_base; ii++)
+		for (jj = 0; (jj < SIGNATURE_COUNT) && !bios_base; jj++)
+			if (!memcmp((void *) addresses[ii] + signatures[jj].sig_offset, (void *) signatures[jj].signature, (int) signatures[jj].sig_length))
+				bios_base = addresses[ii];
+
+	if (!bios_base) {
+		printk("NCR53c406a: BIOS signature not found\n");
+		return 0;
+	}
+
+	DEB(printk("NCR53c406a BIOS found at 0x%x\n", (unsigned int) bios_base);
+	    );
+#endif				/* USE_BIOS */
+
+#ifdef PORT_BASE
+	if (!request_region(port_base, 0x10, "NCR53c406a"))	/* ports already snatched */
+		port_base = 0;
+
+#else				/* autodetect */
+	if (port_base) {	/* LILO override */
+		if (!request_region(port_base, 0x10, "NCR53c406a"))
+			port_base = 0;
+	} else {
+		for (i = 0; i < PORT_COUNT && !port_base; i++) {
+			if (!request_region(ports[i], 0x10, "NCR53c406a")) {
+				DEB(printk("NCR53c406a: port 0x%x in use\n", ports[i]));
+			} else {
+				VDEB(printk("NCR53c406a: port 0x%x available\n", ports[i]));
+				outb(C5_IMG, ports[i] + 0x0d);	/* reg set 1 */
+				if ((inb(ports[i] + 0x0e) ^ inb(ports[i] + 0x0e)) == 7 && (inb(ports[i] + 0x0e) ^ inb(ports[i] + 0x0e)) == 7 && (inb(ports[i] + 0x0e) & 0xf8) == 0x58) {
+					port_base = ports[i];
+					VDEB(printk("NCR53c406a: Sig register valid\n"));
+					VDEB(printk("port_base=0x%x\n", port_base));
+					break;
+				}
+				release_region(ports[i], 0x10);
+			}
+		}
+	}
+#endif				/* PORT_BASE */
+
+	if (!port_base) {	/* no ports found */
+		printk("NCR53c406a: no available ports found\n");
+		return 0;
+	}
+
+	DEB(printk("NCR53c406a detected\n"));
+
+	calc_port_addr();
+	chip_init();
+
+#ifndef IRQ_LEV
+	if (irq_level < 0) {	/* LILO override if >= 0 */
+		irq_level = irq_probe();
+		if (irq_level < 0) {	/* Trouble */
+			printk("NCR53c406a: IRQ problem, irq_level=%d, giving up\n", irq_level);
+			goto err_release;
+		}
+	}
+#endif
+
+	DEB(printk("NCR53c406a: using port_base 0x%x\n", port_base));
+
+	present = 1;
+	tpnt->proc_name = "NCR53c406a";
+
+	shpnt = scsi_register(tpnt, 0);
+	if (!shpnt) {
+		printk("NCR53c406a: Unable to register host, giving up.\n");
+		goto err_release;
+	}
+
+	if (irq_level > 0) {
+		if (request_irq(irq_level, do_NCR53c406a_intr, 0, "NCR53c406a", shpnt)) {
+			printk("NCR53c406a: unable to allocate IRQ %d\n", irq_level);
+			goto err_free_scsi;
+		}
+		tpnt->can_queue = 1;
+		DEB(printk("NCR53c406a: allocated IRQ %d\n", irq_level));
+	} else if (irq_level == 0) {
+		tpnt->can_queue = 0;
+		DEB(printk("NCR53c406a: No interrupts detected\n"));
+		printk("NCR53c406a driver no longer supports polling interface\n");
+		printk("Please email linux-scsi@vger.kernel.org\n");
+                        
+#if USE_DMA
+		printk("NCR53c406a: No interrupts found and DMA mode defined. Giving up.\n");
+#endif				/* USE_DMA */
+		goto err_free_scsi;
+	} else {
+		DEB(printk("NCR53c406a: Shouldn't get here!\n"));
+		goto err_free_scsi;
+	}
+
+#if USE_DMA
+	dma_chan = DMA_CHAN;
+	if (request_dma(dma_chan, "NCR53c406a") != 0) {
+		printk("NCR53c406a: unable to allocate DMA channel %d\n", dma_chan);
+		goto err_free_irq;
+	}
+
+	DEB(printk("Allocated DMA channel %d\n", dma_chan));
+#endif				/* USE_DMA */
+
+	shpnt->irq = irq_level;
+	shpnt->io_port = port_base;
+	shpnt->n_io_port = 0x10;
+#if USE_DMA
+	shpnt->dma = dma_chan;
+#endif
+
+#if USE_DMA
+	sprintf(info_msg, "NCR53c406a at 0x%x, IRQ %d, DMA channel %d.", port_base, irq_level, dma_chan);
+#else
+	sprintf(info_msg, "NCR53c406a at 0x%x, IRQ %d, %s PIO mode.", port_base, irq_level, fast_pio ? "fast" : "slow");
+#endif
+
+	return (present);
+
+#if USE_DMA
+      err_free_irq:
+	if (irq_level)
+		free_irq(irq_level, shpnt);
+#endif
+      err_free_scsi:
+	scsi_unregister(shpnt);
+      err_release:
+	release_region(port_base, 0x10);
+	return 0;
+}
+
+static int NCR53c406a_release(struct Scsi_Host *shost)
+{
+	if (shost->irq)
+		free_irq(shost->irq, NULL);
+#ifdef USE_DMA
+	if (shost->dma_channel != 0xff)
+		free_dma(shost->dma_channel);
+#endif
+	if (shost->io_port && shost->n_io_port)
+		release_region(shost->io_port, shost->n_io_port);
+
+	scsi_unregister(shost);
+	return 0;
+}
+
+/* called from init/main.c */
+static int __init NCR53c406a_setup(char *str)
+{
+	static size_t setup_idx = 0;
+	size_t i;
+	int ints[4];
+
+	DEB(printk("NCR53c406a: Setup called\n");
+	    );
+
+	if (setup_idx >= PORT_COUNT - 1) {
+		printk("NCR53c406a: Setup called too many times.  Bad LILO params?\n");
+		return 0;
+	}
+	get_options(str, 4, ints);
+	if (ints[0] < 1 || ints[0] > 3) {
+		printk("NCR53c406a: Malformed command line\n");
+		printk("NCR53c406a: Usage: ncr53c406a=<PORTBASE>[,<IRQ>[,<FASTPIO>]]\n");
+		return 0;
+	}
+	for (i = 0; i < PORT_COUNT && !port_base; i++)
+		if (ports[i] == ints[1]) {
+			port_base = ints[1];
+			DEB(printk("NCR53c406a: Specified port_base 0x%x\n", port_base);
+			    )
+		}
+	if (!port_base) {
+		printk("NCR53c406a: Invalid PORTBASE 0x%x specified\n", ints[1]);
+		return 0;
+	}
+
+	if (ints[0] > 1) {
+		if (ints[2] == 0) {
+			irq_level = 0;
+			DEB(printk("NCR53c406a: Specified irq %d\n", irq_level);
+			    )
+		} else
+			for (i = 0; i < INTR_COUNT && irq_level < 0; i++)
+				if (intrs[i] == ints[2]) {
+					irq_level = ints[2];
+					DEB(printk("NCR53c406a: Specified irq %d\n", port_base);
+					    )
+				}
+		if (irq_level < 0)
+			printk("NCR53c406a: Invalid IRQ %d specified\n", ints[2]);
+	}
+
+	if (ints[0] > 2)
+		fast_pio = ints[3];
+
+	DEB(printk("NCR53c406a: port_base=0x%x, irq=%d, fast_pio=%d\n", port_base, irq_level, fast_pio);)
+	return 1;
+}
+
+__setup("ncr53c406a=", NCR53c406a_setup);
+
+static const char *NCR53c406a_info(struct Scsi_Host *SChost)
+{
+	DEB(printk("NCR53c406a_info called\n"));
+	return (info_msg);
+}
+
+#if 0
+static void wait_intr(void)
+{
+	unsigned long i = jiffies + WATCHDOG;
+
+	while (time_after(i, jiffies) && !(inb(STAT_REG) & 0xe0)) {	/* wait for a pseudo-interrupt */
+		cpu_relax();
+		barrier();
+	}
+
+	if (time_before_eq(i, jiffies)) {	/* Timed out */
+		rtrc(0);
+		current_SC->result = DID_TIME_OUT << 16;
+		current_SC->SCp.phase = idle;
+		current_SC->scsi_done(current_SC);
+		return;
+	}
+
+	NCR53c406a_intr(0, NULL, NULL);
+}
+#endif
+
+static int NCR53c406a_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
+{
+	int i;
+
+	VDEB(printk("NCR53c406a_queue called\n"));
+	DEB(printk("cmd=%02x, cmd_len=%02x, target=%02x, lun=%02x, bufflen=%d\n", SCpnt->cmnd[0], SCpnt->cmd_len, SCpnt->target, SCpnt->lun, SCpnt->request_bufflen));
+
+#if 0
+	VDEB(for (i = 0; i < SCpnt->cmd_len; i++)
+	     printk("cmd[%d]=%02x  ", i, SCpnt->cmnd[i]));
+	VDEB(printk("\n"));
+#endif
+
+	current_SC = SCpnt;
+	current_SC->scsi_done = done;
+	current_SC->SCp.phase = command_ph;
+	current_SC->SCp.Status = 0;
+	current_SC->SCp.Message = 0;
+
+	/* We are locked here already by the mid layer */
+	REG0;
+	outb(SCpnt->device->id, DEST_ID);	/* set destination */
+	outb(FLUSH_FIFO, CMD_REG);	/* reset the fifos */
+
+	for (i = 0; i < SCpnt->cmd_len; i++) {
+		outb(SCpnt->cmnd[i], SCSI_FIFO);
+	}
+	outb(SELECT_NO_ATN, CMD_REG);
+
+	rtrc(1);
+	return 0;
+}
+
+static int NCR53c406a_abort(Scsi_Cmnd * SCpnt)
+{
+	DEB(printk("NCR53c406a_abort called\n"));
+	return FAILED;		/* Don't know how to abort */
+}
+
+static int NCR53c406a_host_reset(Scsi_Cmnd * SCpnt)
+{
+	DEB(printk("NCR53c406a_reset called\n"));
+	outb(C4_IMG, CONFIG4);	/* Select reg set 0 */
+	outb(CHIP_RESET, CMD_REG);
+	outb(SCSI_NOP, CMD_REG);	/* required after reset */
+	outb(SCSI_RESET, CMD_REG);
+	chip_init();
+
+	rtrc(2);
+	return SUCCESS;
+}
+
+static int NCR53c406a_device_reset(Scsi_Cmnd * SCpnt)
+{
+	return FAILED;
+}
+
+static int NCR53c406a_bus_reset(Scsi_Cmnd * SCpnt)
+{
+	return FAILED;
+}
+
+static int NCR53c406a_biosparm(struct scsi_device *disk,
+                               struct block_device *dev,
+			       sector_t capacity, int *info_array)
+{
+	int size;
+
+	DEB(printk("NCR53c406a_biosparm called\n"));
+
+	size = capacity;
+	info_array[0] = 64;	/* heads */
+	info_array[1] = 32;	/* sectors */
+	info_array[2] = size >> 11;	/* cylinders */
+	if (info_array[2] > 1024) {	/* big disk */
+		info_array[0] = 255;
+		info_array[1] = 63;
+		info_array[2] = size / (255 * 63);
+	}
+	return 0;
+}
+
+static irqreturn_t do_NCR53c406a_intr(int unused, void *dev_id,
+					struct pt_regs *regs)
+{
+	unsigned long flags;
+	struct Scsi_Host *dev = dev_id;
+
+	spin_lock_irqsave(dev->host_lock, flags);
+	NCR53c406a_intr(0, dev_id, regs);
+	spin_unlock_irqrestore(dev->host_lock, flags);
+	return IRQ_HANDLED;
+}
+
+static void NCR53c406a_intr(int unused, void *dev_id, struct pt_regs *regs)
+{
+	DEB(unsigned char fifo_size;
+	    )
+	    DEB(unsigned char seq_reg;
+	    )
+	unsigned char status, int_reg;
+#if USE_PIO
+	unsigned char pio_status;
+	struct scatterlist *sglist;
+	unsigned int sgcount;
+#endif
+
+	VDEB(printk("NCR53c406a_intr called\n"));
+
+#if USE_PIO
+	REG1;
+	pio_status = inb(PIO_STATUS);
+#endif
+	REG0;
+	status = inb(STAT_REG);
+	DEB(seq_reg = inb(SEQ_REG));
+	int_reg = inb(INT_REG);
+	DEB(fifo_size = inb(FIFO_FLAGS) & 0x1f);
+
+#if NCR53C406A_DEBUG
+	printk("status=%02x, seq_reg=%02x, int_reg=%02x, fifo_size=%02x", status, seq_reg, int_reg, fifo_size);
+#if (USE_DMA)
+	printk("\n");
+#else
+	printk(", pio=%02x\n", pio_status);
+#endif				/* USE_DMA */
+#endif				/* NCR53C406A_DEBUG */
+
+	if (int_reg & 0x80) {	/* SCSI reset intr */
+		rtrc(3);
+		DEB(printk("NCR53c406a: reset intr received\n"));
+		current_SC->SCp.phase = idle;
+		current_SC->result = DID_RESET << 16;
+		current_SC->scsi_done(current_SC);
+		return;
+	}
+#if USE_PIO
+	if (pio_status & 0x80) {
+		printk("NCR53C406A: Warning: PIO error!\n");
+		current_SC->SCp.phase = idle;
+		current_SC->result = DID_ERROR << 16;
+		current_SC->scsi_done(current_SC);
+		return;
+	}
+#endif				/* USE_PIO */
+
+	if (status & 0x20) {	/* Parity error */
+		printk("NCR53c406a: Warning: parity error!\n");
+		current_SC->SCp.phase = idle;
+		current_SC->result = DID_PARITY << 16;
+		current_SC->scsi_done(current_SC);
+		return;
+	}
+
+	if (status & 0x40) {	/* Gross error */
+		printk("NCR53c406a: Warning: gross error!\n");
+		current_SC->SCp.phase = idle;
+		current_SC->result = DID_ERROR << 16;
+		current_SC->scsi_done(current_SC);
+		return;
+	}
+
+	if (int_reg & 0x20) {	/* Disconnect */
+		DEB(printk("NCR53c406a: disconnect intr received\n"));
+		if (current_SC->SCp.phase != message_in) {	/* Unexpected disconnect */
+			current_SC->result = DID_NO_CONNECT << 16;
+		} else {	/* Command complete, return status and message */
+			current_SC->result = (current_SC->SCp.Status & 0xff)
+			    | ((current_SC->SCp.Message & 0xff) << 8) | (DID_OK << 16);
+		}
+
+		rtrc(0);
+		current_SC->SCp.phase = idle;
+		current_SC->scsi_done(current_SC);
+		return;
+	}
+
+	switch (status & 0x07) {	/* scsi phase */
+	case 0x00:		/* DATA-OUT */
+		if (int_reg & 0x10) {	/* Target requesting info transfer */
+			rtrc(5);
+			current_SC->SCp.phase = data_out;
+			VDEB(printk("NCR53c406a: Data-Out phase\n"));
+			outb(FLUSH_FIFO, CMD_REG);
+			LOAD_DMA_COUNT(current_SC->request_bufflen);	/* Max transfer size */
+#if USE_DMA			/* No s/g support for DMA */
+			NCR53c406a_dma_write(current_SC->request_buffer, current_SC->request_bufflen);
+#endif				/* USE_DMA */
+			outb(TRANSFER_INFO | DMA_OP, CMD_REG);
+#if USE_PIO
+			if (!current_SC->use_sg)	/* Don't use scatter-gather */
+				NCR53c406a_pio_write(current_SC->request_buffer, current_SC->request_bufflen);
+			else {	/* use scatter-gather */
+				sgcount = current_SC->use_sg;
+				sglist = current_SC->request_buffer;
+				while (sgcount--) {
+					NCR53c406a_pio_write(page_address(sglist->page) + sglist->offset, sglist->length);
+					sglist++;
+				}
+			}
+			REG0;
+#endif				/* USE_PIO */
+		}
+		break;
+
+	case 0x01:		/* DATA-IN */
+		if (int_reg & 0x10) {	/* Target requesting info transfer */
+			rtrc(6);
+			current_SC->SCp.phase = data_in;
+			VDEB(printk("NCR53c406a: Data-In phase\n"));
+			outb(FLUSH_FIFO, CMD_REG);
+			LOAD_DMA_COUNT(current_SC->request_bufflen);	/* Max transfer size */
+#if USE_DMA			/* No s/g support for DMA */
+			NCR53c406a_dma_read(current_SC->request_buffer, current_SC->request_bufflen);
+#endif				/* USE_DMA */
+			outb(TRANSFER_INFO | DMA_OP, CMD_REG);
+#if USE_PIO
+			if (!current_SC->use_sg)	/* Don't use scatter-gather */
+				NCR53c406a_pio_read(current_SC->request_buffer, current_SC->request_bufflen);
+			else {	/* Use scatter-gather */
+				sgcount = current_SC->use_sg;
+				sglist = current_SC->request_buffer;
+				while (sgcount--) {
+					NCR53c406a_pio_read(page_address(sglist->page) + sglist->offset, sglist->length);
+					sglist++;
+				}
+			}
+			REG0;
+#endif				/* USE_PIO */
+		}
+		break;
+
+	case 0x02:		/* COMMAND */
+		current_SC->SCp.phase = command_ph;
+		printk("NCR53c406a: Warning: Unknown interrupt occurred in command phase!\n");
+		break;
+
+	case 0x03:		/* STATUS */
+		rtrc(7);
+		current_SC->SCp.phase = status_ph;
+		VDEB(printk("NCR53c406a: Status phase\n"));
+		outb(FLUSH_FIFO, CMD_REG);
+		outb(INIT_CMD_COMPLETE, CMD_REG);
+		break;
+
+	case 0x04:		/* Reserved */
+	case 0x05:		/* Reserved */
+		printk("NCR53c406a: WARNING: Reserved phase!!!\n");
+		break;
+
+	case 0x06:		/* MESSAGE-OUT */
+		DEB(printk("NCR53c406a: Message-Out phase\n"));
+		current_SC->SCp.phase = message_out;
+		outb(SET_ATN, CMD_REG);	/* Reject the message */
+		outb(MSG_ACCEPT, CMD_REG);
+		break;
+
+	case 0x07:		/* MESSAGE-IN */
+		rtrc(4);
+		VDEB(printk("NCR53c406a: Message-In phase\n"));
+		current_SC->SCp.phase = message_in;
+
+		current_SC->SCp.Status = inb(SCSI_FIFO);
+		current_SC->SCp.Message = inb(SCSI_FIFO);
+
+		VDEB(printk("SCSI FIFO size=%d\n", inb(FIFO_FLAGS) & 0x1f));
+		DEB(printk("Status = %02x  Message = %02x\n", current_SC->SCp.Status, current_SC->SCp.Message));
+
+		if (current_SC->SCp.Message == SAVE_POINTERS || current_SC->SCp.Message == DISCONNECT) {
+			outb(SET_ATN, CMD_REG);	/* Reject message */
+			DEB(printk("Discarding SAVE_POINTERS message\n"));
+		}
+		outb(MSG_ACCEPT, CMD_REG);
+		break;
+	}
+}
+
+#ifndef IRQ_LEV
+static int irq_probe(void)
+{
+	int irqs, irq;
+	unsigned long i;
+
+	inb(INT_REG);		/* clear the interrupt register */
+	irqs = probe_irq_on();
+
+	/* Invalid command will cause an interrupt */
+	REG0;
+	outb(0xff, CMD_REG);
+
+	/* Wait for the interrupt to occur */
+	i = jiffies + WATCHDOG;
+	while (time_after(i, jiffies) && !(inb(STAT_REG) & 0x80))
+		barrier();
+	if (time_before_eq(i, jiffies)) {	/* Timed out, must be hardware trouble */
+		probe_irq_off(irqs);
+		return -1;
+	}
+
+	irq = probe_irq_off(irqs);
+
+	/* Kick the chip */
+	outb(CHIP_RESET, CMD_REG);
+	outb(SCSI_NOP, CMD_REG);
+	chip_init();
+
+	return irq;
+}
+#endif				/* IRQ_LEV */
+
+static void chip_init(void)
+{
+	REG1;
+#if USE_DMA
+	outb(0x00, PIO_STATUS);
+#else				/* USE_PIO */
+	outb(0x01, PIO_STATUS);
+#endif
+	outb(0x00, PIO_FLAG);
+
+	outb(C4_IMG, CONFIG4);	/* REG0; */
+	outb(C3_IMG, CONFIG3);
+	outb(C2_IMG, CONFIG2);
+	outb(C1_IMG, CONFIG1);
+
+	outb(0x05, CLKCONV);	/* clock conversion factor */
+	outb(0x9C, SRTIMOUT);	/* Selection timeout */
+	outb(0x05, SYNCPRD);	/* Synchronous transfer period */
+	outb(SYNC_MODE, SYNCOFF);	/* synchronous mode */
+}
+
+static void __init calc_port_addr(void)
+{
+	/* Control Register Set 0 */
+	TC_LSB = (port_base + 0x00);
+	TC_MSB = (port_base + 0x01);
+	SCSI_FIFO = (port_base + 0x02);
+	CMD_REG = (port_base + 0x03);
+	STAT_REG = (port_base + 0x04);
+	DEST_ID = (port_base + 0x04);
+	INT_REG = (port_base + 0x05);
+	SRTIMOUT = (port_base + 0x05);
+	SEQ_REG = (port_base + 0x06);
+	SYNCPRD = (port_base + 0x06);
+	FIFO_FLAGS = (port_base + 0x07);
+	SYNCOFF = (port_base + 0x07);
+	CONFIG1 = (port_base + 0x08);
+	CLKCONV = (port_base + 0x09);
+	/* TESTREG          = (port_base+0x0A); */
+	CONFIG2 = (port_base + 0x0B);
+	CONFIG3 = (port_base + 0x0C);
+	CONFIG4 = (port_base + 0x0D);
+	TC_HIGH = (port_base + 0x0E);
+	/* FIFO_BOTTOM      = (port_base+0x0F); */
+
+	/* Control Register Set 1 */
+	/* JUMPER_SENSE     = (port_base+0x00); */
+	/* SRAM_PTR         = (port_base+0x01); */
+	/* SRAM_DATA        = (port_base+0x02); */
+	PIO_FIFO = (port_base + 0x04);
+	/* PIO_FIFO1        = (port_base+0x05); */
+	/* PIO_FIFO2        = (port_base+0x06); */
+	/* PIO_FIFO3        = (port_base+0x07); */
+	PIO_STATUS = (port_base + 0x08);
+	/* ATA_CMD          = (port_base+0x09); */
+	/* ATA_ERR          = (port_base+0x0A); */
+	PIO_FLAG = (port_base + 0x0B);
+	CONFIG5 = (port_base + 0x0D);
+	/* SIGNATURE        = (port_base+0x0E); */
+	/* CONFIG6          = (port_base+0x0F); */
+}
+
+MODULE_LICENSE("GPL");
+
+/* NOTE:  scatter-gather support only works in PIO mode.
+ * Use SG_NONE if DMA mode is enabled!
+ */
+
+static Scsi_Host_Template driver_template = 
+{
+     .proc_name         	= "NCR53c406a"		/* proc_name */,        
+     .name              	= "NCR53c406a"		/* name */,             
+     .detect            	= NCR53c406a_detect	/* detect */,           
+     .release            	= NCR53c406a_release,
+     .info              	= NCR53c406a_info		/* info */,             
+     .queuecommand      	= NCR53c406a_queue	/* queuecommand */,     
+     .eh_abort_handler  	= NCR53c406a_abort	/* abort */,            
+     .eh_bus_reset_handler      = NCR53c406a_bus_reset	/* reset */,            
+     .eh_device_reset_handler   = NCR53c406a_device_reset	/* reset */,            
+     .eh_host_reset_handler     = NCR53c406a_host_reset	/* reset */,            
+     .bios_param        	= NCR53c406a_biosparm	/* biosparm */,         
+     .can_queue         	= 1			/* can_queue */,        
+     .this_id           	= 7			/* SCSI ID of the chip */,
+     .sg_tablesize      	= 32			/*SG_ALL*/ /*SG_NONE*/, 
+     .cmd_per_lun       	= 1			/* commands per lun */, 
+     .unchecked_isa_dma 	= 1			/* unchecked_isa_dma */,
+     .use_clustering    	= ENABLE_CLUSTERING                               
+};
+
+#include "scsi_module.c"
+
+/*
+ * Overrides for Emacs so that we get a uniform tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-indent-level: 4
+ * c-brace-imaginary-offset: 0
+ * c-brace-offset: -4
+ * c-argdecl-indent: 4
+ * c-label-offset: -4
+ * c-continued-statement-offset: 4
+ * c-continued-brace-offset: 0
+ * indent-tabs-mode: nil
+ * tab-width: 8
+ * End:
+ */