Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (207 commits)
  [SCSI] gdth: fix CONFIG_ISA build failure
  [SCSI] esp_scsi: remove __dev{init,exit}
  [SCSI] gdth: !use_sg cleanup and use of scsi accessors
  [SCSI] gdth: Move members from SCp to gdth_cmndinfo, stage 2
  [SCSI] gdth: Setup proper per-command private data
  [SCSI] gdth: Remove gdth_ctr_tab[]
  [SCSI] gdth: switch to modern scsi host registration
  [SCSI] gdth: gdth_interrupt() gdth_get_status() & gdth_wait() fixes
  [SCSI] gdth: clean up host private data
  [SCSI] gdth: Remove virt hosts
  [SCSI] gdth: Reorder scsi_host_template intitializers
  [SCSI] gdth: kill gdth_{read,write}[bwl] wrappers
  [SCSI] gdth: Remove 2.4.x support, in-kernel changelog
  [SCSI] gdth: split out pci probing
  [SCSI] gdth: split out eisa probing
  [SCSI] gdth: split out isa probing
  gdth: Make one abuse of scsi_cmnd less obvious
  [SCSI] NCR5380: Use scsi_eh API for REQUEST_SENSE invocation
  [SCSI] usb storage: use scsi_eh API in REQUEST_SENSE execution
  [SCSI] scsi_error: Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE
  ...

1 files changed, 41 insertions, 7 deletions

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 6f2c71ef47e..30905cebefb 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -272,6 +272,13 @@ config SCSI_FC_ATTRS
 	  each attached FiberChannel device to sysfs, say Y.
 	  Otherwise, say N.
 
+config SCSI_FC_TGT_ATTRS
+	bool "SCSI target support for FiberChannel Transport Attributes"
+	depends on SCSI_FC_ATTRS
+	depends on SCSI_TGT = y || SCSI_TGT = SCSI_FC_ATTRS
+	help
+		If you want to use SCSI target mode drivers enable this option.
+
 config SCSI_ISCSI_ATTRS
 	tristate "iSCSI Transport Attributes"
 	depends on SCSI && NET
@@ -289,6 +296,20 @@ config SCSI_SAS_ATTRS
 
 source "drivers/scsi/libsas/Kconfig"
 
+config SCSI_SRP_ATTRS
+	tristate "SRP Transport Attributes"
+	depends on SCSI
+	help
+	  If you wish to export transport-specific information about
+	  each attached SRP device to sysfs, say Y.
+
+config SCSI_SRP_TGT_ATTRS
+	bool "SCSI target support for SRP Transport Attributes"
+	depends on SCSI_SRP_ATTRS
+	depends on SCSI_TGT = y || SCSI_TGT = SCSI_SRP_ATTRS
+	help
+		If you want to use SCSI target mode drivers enable this option.
+
 endmenu
 
 menuconfig SCSI_LOWLEVEL
@@ -502,7 +523,6 @@ config SCSI_ADVANSYS
 	tristate "AdvanSys SCSI support"
 	depends on SCSI
 	depends on ISA || EISA || PCI
-	depends on BROKEN || X86_32
 	help
 	  This is a driver for all SCSI host adapters manufactured by
 	  AdvanSys. It is documented in the kernel source in
@@ -524,19 +544,32 @@ config SCSI_IN2000
 	  module will be called in2000.
 
 config SCSI_ARCMSR
-	tristate "ARECA ARC11X0[PCI-X]/ARC12X0[PCI-EXPRESS] SATA-RAID support"
+	tristate "ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID Host Adapter"
 	depends on PCI && SCSI
 	help
-	  This driver supports all of ARECA's SATA RAID controller cards.
+	  This driver supports all of ARECA's SATA/SAS RAID controller cards.
 	  This is an ARECA-maintained driver by Erich Chen.
-	  If you have any problems, please mail to: < erich@areca.com.tw >
+	  If you have any problems, please mail to: <erich@areca.com.tw>.
 	  Areca supports Linux RAID config tools.
-
-	  < http://www.areca.com.tw >
+	  Please link <http://www.areca.com.tw>
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called arcmsr (modprobe arcmsr).
 
+config SCSI_ARCMSR_AER
+	bool "Enable PCI Error Recovery Capability in Areca Driver(ARCMSR)"
+	depends on SCSI_ARCMSR && PCIEAER
+	default n
+	help
+	  The advanced error reporting(AER) capability is "NOT" provided by
+	  ARC1200/1201/1202 SATA RAID controllers cards.
+	  If your card is one of ARC1200/1201/1202, please use the default setting, n.
+	  If your card is other models, you could pick it
+	  on condition that the kernel version is greater than 2.6.19.
+	  This function is maintained driver by Nick Cheng. If you have any
+	  problems or suggestion, you are welcome to contact with <nick.cheng@areca.com.tw>.
+	  To enable this function, choose Y here.
+
 source "drivers/scsi/megaraid/Kconfig.megaraid"
 
 config SCSI_HPTIOP
@@ -836,6 +869,7 @@ config SCSI_IPS
 config SCSI_IBMVSCSI
 	tristate "IBM Virtual SCSI support"
 	depends on PPC_PSERIES || PPC_ISERIES
+	select SCSI_SRP_ATTRS
 	help
 	  This is the IBM POWER Virtual SCSI Client
 
@@ -844,7 +878,7 @@ config SCSI_IBMVSCSI
 
 config SCSI_IBMVSCSIS
 	tristate "IBM Virtual SCSI Server support"
-	depends on PPC_PSERIES && SCSI_TGT && SCSI_SRP
+	depends on PPC_PSERIES && SCSI_SRP && SCSI_SRP_TGT_ATTRS
 	help
 	  This is the SRP target driver for IBM pSeries virtual environments.