Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1079 insertions, 0 deletions

diff --git a/drivers/sbus/char/bpp.c b/drivers/sbus/char/bpp.c
new file mode 100644
index 00000000000..8f0f46907a8
--- /dev/null
+++ b/drivers/sbus/char/bpp.c
@@ -0,0 +1,1079 @@
+/*
+ * drivers/sbus/char/bpp.c
+ *
+ * Copyright (c) 1995 Picture Elements
+ *      Stephen Williams (steve@icarus.com)
+ *      Gus Baldauf (gbaldauf@ix.netcom.com)
+ *
+ * Linux/SPARC port by Peter Zaitcev.
+ * Integration into SPARC tree by Tom Dyas.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/smp_lock.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/ioport.h>
+#include <linux/major.h>
+#include <linux/devfs_fs_kernel.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+
+#if defined(__i386__)
+# include <asm/system.h>
+#endif
+
+#if defined(__sparc__)
+# include <linux/init.h>
+# include <linux/delay.h>         /* udelay() */
+
+# include <asm/oplib.h>           /* OpenProm Library */
+# include <asm/sbus.h>
+#endif
+
+#include <asm/bpp.h>
+
+#define BPP_PROBE_CODE 0x55
+#define BPP_DELAY 100
+
+static const unsigned  BPP_MAJOR = LP_MAJOR;
+static const char* dev_name = "bpp";
+
+/* When switching from compatibility to a mode where I can read, try
+   the following mode first. */
+
+/* const unsigned char DEFAULT_ECP = 0x10; */
+static const unsigned char DEFAULT_ECP = 0x30;
+static const unsigned char DEFAULT_NIBBLE = 0x00;
+
+/*
+ * These are 1284 time constraints, in units of jiffies.
+ */
+
+static const unsigned long TIME_PSetup = 1;
+static const unsigned long TIME_PResponse = 6;
+static const unsigned long TIME_IDLE_LIMIT = 2000;
+
+/*
+ * One instance per supported subdevice...
+ */
+# define BPP_NO 3
+
+enum IEEE_Mode { COMPATIBILITY, NIBBLE, ECP, ECP_RLE, EPP };
+
+struct inst {
+      unsigned present  : 1; /* True if the hardware exists */
+      unsigned enhanced : 1; /* True if the hardware in "enhanced" */
+      unsigned opened   : 1; /* True if the device is opened already */
+      unsigned run_flag : 1; /* True if waiting for a repeate byte */
+
+      unsigned char direction; /* 0 --> out, 0x20 --> IN */
+      unsigned char pp_state; /* State of host controlled pins. */
+      enum IEEE_Mode mode;
+
+      unsigned char run_length;
+      unsigned char repeat_byte;
+
+      /* These members manage timeouts for programmed delays */
+      wait_queue_head_t wait_queue;
+      struct timer_list timer_list;
+};
+
+static struct inst instances[BPP_NO];
+
+#if defined(__i386__)
+
+static const unsigned short base_addrs[BPP_NO] = { 0x278, 0x378, 0x3bc };
+
+/*
+ * These are for data access.
+ * Control lines accesses are hidden in set_bits() and get_bits().
+ * The exception is the probe procedure, which is system-dependent.
+ */
+#define bpp_outb_p(data, base)  outb_p((data), (base))
+#define bpp_inb(base)  inb(base)
+#define bpp_inb_p(base)  inb_p(base)
+
+/*
+ * This method takes the pin values mask and sets the hardware pins to
+ * the requested value: 1 == high voltage, 0 == low voltage. This
+ * burries the annoying PC bit inversion and preserves the direction
+ * flag.
+ */
+static void set_pins(unsigned short pins, unsigned minor)
+{
+      unsigned char bits = instances[minor].direction;  /* == 0x20 */
+
+      if (! (pins & BPP_PP_nStrobe))   bits |= 1;
+      if (! (pins & BPP_PP_nAutoFd))   bits |= 2;
+      if (   pins & BPP_PP_nInit)      bits |= 4;
+      if (! (pins & BPP_PP_nSelectIn)) bits |= 8;
+
+      instances[minor].pp_state = bits;
+
+      outb_p(bits, base_addrs[minor]+2);
+}
+
+static unsigned short get_pins(unsigned minor)
+{
+      unsigned short bits = 0;
+
+      unsigned value = instances[minor].pp_state;
+      if (! (value & 0x01)) bits |= BPP_PP_nStrobe;
+      if (! (value & 0x02)) bits |= BPP_PP_nAutoFd;
+      if (value & 0x04)     bits |= BPP_PP_nInit;
+      if (! (value & 0x08)) bits |= BPP_PP_nSelectIn;
+
+      value = inb_p(base_addrs[minor]+1);
+      if (value & 0x08)     bits |= BPP_GP_nFault;
+      if (value & 0x10)     bits |= BPP_GP_Select;
+      if (value & 0x20)     bits |= BPP_GP_PError;
+      if (value & 0x40)     bits |= BPP_GP_nAck;
+      if (! (value & 0x80)) bits |= BPP_GP_Busy;
+
+      return bits;
+}
+
+#endif /* __i386__ */
+
+#if defined(__sparc__)
+
+/*
+ * Register block
+ */
+      /* DMA registers */
+#define BPP_CSR      0x00
+#define BPP_ADDR     0x04
+#define BPP_BCNT     0x08
+#define BPP_TST_CSR  0x0C
+      /* Parallel Port registers */
+#define BPP_HCR      0x10
+#define BPP_OCR      0x12
+#define BPP_DR       0x14
+#define BPP_TCR      0x15
+#define BPP_OR       0x16
+#define BPP_IR       0x17
+#define BPP_ICR      0x18
+#define BPP_SIZE     0x1A
+
+/* BPP_CSR.  Bits of type RW1 are cleared with writting '1'. */
+#define P_DEV_ID_MASK   0xf0000000      /* R   */
+#define P_DEV_ID_ZEBRA  0x40000000
+#define P_DEV_ID_L64854 0xa0000000      /*      == NCR 89C100+89C105. Pity. */
+#define P_NA_LOADED     0x08000000      /* R    NA wirtten but was not used */
+#define P_A_LOADED      0x04000000      /* R    */
+#define P_DMA_ON        0x02000000      /* R    DMA is not disabled */
+#define P_EN_NEXT       0x01000000      /* RW   */
+#define P_TCI_DIS       0x00800000      /* RW   TCI forbidden from interrupts */
+#define P_DIAG          0x00100000      /* RW   Disables draining and resetting
+                                                of P-FIFO on loading of P_ADDR*/
+#define P_BURST_SIZE    0x000c0000      /* RW   SBus burst size */
+#define P_BURST_8       0x00000000
+#define P_BURST_4       0x00040000
+#define P_BURST_1       0x00080000      /*      "No burst" write */
+#define P_TC            0x00004000      /* RW1  Term Count, can be cleared when
+                                           P_EN_NEXT=1 */
+#define P_EN_CNT        0x00002000      /* RW   */
+#define P_EN_DMA        0x00000200      /* RW   */
+#define P_WRITE         0x00000100      /* R    DMA dir, 1=to ram, 0=to port */
+#define P_RESET         0x00000080      /* RW   */
+#define P_SLAVE_ERR     0x00000040      /* RW1  Access size error */
+#define P_INVALIDATE    0x00000020      /* W    Drop P-FIFO */
+#define P_INT_EN        0x00000010      /* RW   OK to P_INT_PEND||P_ERR_PEND */
+#define P_DRAINING      0x0000000c      /* R    P-FIFO is draining to memory */
+#define P_ERR_PEND      0x00000002      /* R    */
+#define P_INT_PEND      0x00000001      /* R    */
+
+/* BPP_HCR. Time is in increments of SBus clock. */
+#define P_HCR_TEST      0x8000      /* Allows buried counters to be read */
+#define P_HCR_DSW       0x7f00      /* Data strobe width (in ticks) */
+#define P_HCR_DDS       0x007f      /* Data setup before strobe (in ticks) */
+
+/* BPP_OCR. */
+#define P_OCR_MEM_CLR   0x8000
+#define P_OCR_DATA_SRC  0x4000      /* )                  */
+#define P_OCR_DS_DSEL   0x2000      /* )  Bidirectional      */
+#define P_OCR_BUSY_DSEL 0x1000      /* )    selects            */
+#define P_OCR_ACK_DSEL  0x0800      /* )                  */
+#define P_OCR_EN_DIAG   0x0400
+#define P_OCR_BUSY_OP   0x0200      /* Busy operation */
+#define P_OCR_ACK_OP    0x0100      /* Ack operation */
+#define P_OCR_SRST      0x0080      /* Reset state machines. Not selfcleaning. */
+#define P_OCR_IDLE      0x0008      /* PP data transfer state machine is idle */
+#define P_OCR_V_ILCK    0x0002      /* Versatec faded. Zebra only. */
+#define P_OCR_EN_VER    0x0001      /* Enable Versatec (0 - enable). Zebra only. */
+
+/* BPP_TCR */
+#define P_TCR_DIR       0x08
+#define P_TCR_BUSY      0x04
+#define P_TCR_ACK       0x02
+#define P_TCR_DS        0x01        /* Strobe */
+
+/* BPP_OR */
+#define P_OR_V3         0x20        /* )                 */
+#define P_OR_V2         0x10        /* ) on Zebra only   */
+#define P_OR_V1         0x08        /* )                 */
+#define P_OR_INIT       0x04
+#define P_OR_AFXN       0x02        /* Auto Feed */
+#define P_OR_SLCT_IN    0x01
+
+/* BPP_IR */
+#define P_IR_PE         0x04
+#define P_IR_SLCT       0x02
+#define P_IR_ERR        0x01
+
+/* BPP_ICR */
+#define P_DS_IRQ        0x8000      /* RW1  */
+#define P_ACK_IRQ       0x4000      /* RW1  */
+#define P_BUSY_IRQ      0x2000      /* RW1  */
+#define P_PE_IRQ        0x1000      /* RW1  */
+#define P_SLCT_IRQ      0x0800      /* RW1  */
+#define P_ERR_IRQ       0x0400      /* RW1  */
+#define P_DS_IRQ_EN     0x0200      /* RW   Always on rising edge */
+#define P_ACK_IRQ_EN    0x0100      /* RW   Always on rising edge */
+#define P_BUSY_IRP      0x0080      /* RW   1= rising edge */
+#define P_BUSY_IRQ_EN   0x0040      /* RW   */
+#define P_PE_IRP        0x0020      /* RW   1= rising edge */
+#define P_PE_IRQ_EN     0x0010      /* RW   */
+#define P_SLCT_IRP      0x0008      /* RW   1= rising edge */
+#define P_SLCT_IRQ_EN   0x0004      /* RW   */
+#define P_ERR_IRP       0x0002      /* RW1  1= rising edge */
+#define P_ERR_IRQ_EN    0x0001      /* RW   */
+
+static void __iomem *base_addrs[BPP_NO];
+
+#define bpp_outb_p(data, base)	sbus_writeb(data, (base) + BPP_DR)
+#define bpp_inb_p(base)		sbus_readb((base) + BPP_DR)
+#define bpp_inb(base)		sbus_readb((base) + BPP_DR)
+
+static void set_pins(unsigned short pins, unsigned minor)
+{
+      void __iomem *base = base_addrs[minor];
+      unsigned char bits_tcr = 0, bits_or = 0;
+
+      if (instances[minor].direction & 0x20) bits_tcr |= P_TCR_DIR;
+      if (   pins & BPP_PP_nStrobe)          bits_tcr |= P_TCR_DS;
+
+      if (   pins & BPP_PP_nAutoFd)          bits_or |= P_OR_AFXN;
+      if (! (pins & BPP_PP_nInit))           bits_or |= P_OR_INIT;
+      if (! (pins & BPP_PP_nSelectIn))       bits_or |= P_OR_SLCT_IN;
+
+      sbus_writeb(bits_or, base + BPP_OR);
+      sbus_writeb(bits_tcr, base + BPP_TCR);
+}
+
+/*
+ * i386 people read output pins from a software image.
+ * We may get them back from hardware.
+ * Again, inversion of pins must he buried here.
+ */
+static unsigned short get_pins(unsigned minor)
+{
+      void __iomem *base = base_addrs[minor];
+      unsigned short bits = 0;
+      unsigned value_tcr = sbus_readb(base + BPP_TCR);
+      unsigned value_ir = sbus_readb(base + BPP_IR);
+      unsigned value_or = sbus_readb(base + BPP_OR);
+
+      if (value_tcr & P_TCR_DS)         bits |= BPP_PP_nStrobe;
+      if (value_or & P_OR_AFXN)         bits |= BPP_PP_nAutoFd;
+      if (! (value_or & P_OR_INIT))     bits |= BPP_PP_nInit;
+      if (! (value_or & P_OR_SLCT_IN))  bits |= BPP_PP_nSelectIn;
+
+      if (value_ir & P_IR_ERR)          bits |= BPP_GP_nFault;
+      if (! (value_ir & P_IR_SLCT))     bits |= BPP_GP_Select;
+      if (! (value_ir & P_IR_PE))       bits |= BPP_GP_PError;
+      if (! (value_tcr & P_TCR_ACK))    bits |= BPP_GP_nAck;
+      if (value_tcr & P_TCR_BUSY)       bits |= BPP_GP_Busy;
+
+      return bits;
+}
+
+#endif /* __sparc__ */
+
+static void bpp_wake_up(unsigned long val)
+{ wake_up(&instances[val].wait_queue); }
+
+static void snooze(unsigned long snooze_time, unsigned minor)
+{
+      init_timer(&instances[minor].timer_list);
+      instances[minor].timer_list.expires = jiffies + snooze_time + 1;
+      instances[minor].timer_list.data    = minor;
+      add_timer(&instances[minor].timer_list);
+      sleep_on (&instances[minor].wait_queue);
+}
+
+static int wait_for(unsigned short set, unsigned short clr,
+               unsigned long delay, unsigned minor)
+{
+      unsigned short pins = get_pins(minor);
+
+      unsigned long extime = 0;
+
+      /*
+       * Try a real fast scan for the first jiffy, in case the device
+       * responds real good. The first while loop guesses an expire
+       * time accounting for possible wraparound of jiffies.
+       */
+      while (time_after_eq(jiffies, extime)) extime = jiffies + 1;
+      while ( (time_before(jiffies, extime))
+              && (((pins & set) != set) || ((pins & clr) != 0)) ) {
+            pins = get_pins(minor);
+      }
+
+      delay -= 1;
+
+      /*
+       * If my delay expired or the pins are still not where I want
+       * them, then resort to using the timer and greatly reduce my
+       * sample rate. If the peripheral is going to be slow, this will
+       * give the CPU up to some more worthy process.
+       */
+      while ( delay && (((pins & set) != set) || ((pins & clr) != 0)) ) {
+
+            snooze(1, minor);
+            pins = get_pins(minor);
+            delay -= 1;
+      }
+
+      if (delay == 0) return -1;
+      else return pins;
+}
+
+/*
+ * Return ZERO(0) If the negotiation succeeds, an errno otherwise. An
+ * errno means something broke, and I do not yet know how to fix it.
+ */
+static int negotiate(unsigned char mode, unsigned minor)
+{
+      int rc;
+      unsigned short pins = get_pins(minor);
+      if (pins & BPP_PP_nSelectIn) return -EIO;
+
+
+        /* Event 0: Write the mode to the data lines */
+      bpp_outb_p(mode, base_addrs[minor]);
+
+      snooze(TIME_PSetup, minor);
+
+        /* Event 1: Strobe the mode code into the peripheral */
+      set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe|BPP_PP_nInit, minor);
+
+        /* Wait for Event 2: Peripheral responds as a 1284 device. */
+      rc = wait_for(BPP_GP_PError|BPP_GP_Select|BPP_GP_nFault,
+                BPP_GP_nAck,
+                TIME_PResponse,
+                minor);
+
+      if (rc == -1) return -ETIMEDOUT;
+
+        /* Event 3: latch extensibility request */
+      set_pins(BPP_PP_nSelectIn|BPP_PP_nInit, minor);
+
+        /* ... quick nap while peripheral ponders the byte i'm sending...*/
+      snooze(1, minor);
+
+        /* Event 4: restore strobe, to ACK peripheral's response. */
+      set_pins(BPP_PP_nSelectIn|BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor);
+
+        /* Wait for Event 6: Peripheral latches response bits */
+      rc = wait_for(BPP_GP_nAck, 0, TIME_PSetup+TIME_PResponse, minor);
+      if (rc == -1) return -EIO;
+
+        /* A 1284 device cannot refuse nibble mode */
+      if (mode == DEFAULT_NIBBLE) return 0;
+
+      if (pins & BPP_GP_Select) return 0;
+
+      return -EPROTONOSUPPORT;
+}
+
+static int terminate(unsigned minor)
+{
+      int rc;
+
+        /* Event 22: Request termination of 1284 mode */
+      set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor);
+
+        /* Wait for Events 23 and 24: ACK termination request. */
+      rc = wait_for(BPP_GP_Busy|BPP_GP_nFault,
+                BPP_GP_nAck,
+                TIME_PSetup+TIME_PResponse,
+                minor);
+
+      instances[minor].direction = 0;
+      instances[minor].mode = COMPATIBILITY;
+
+      if (rc == -1) {
+          return -EIO;
+      }
+
+        /* Event 25: Handshake by lowering nAutoFd */
+      set_pins(BPP_PP_nStrobe|BPP_PP_nInit, minor);
+
+        /* Event 26: Peripheral wiggles lines... */
+
+        /* Event 27: Peripheral sets nAck HIGH to ack handshake */
+      rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor);
+      if (rc == -1) {
+          set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor);
+          return -EIO;
+      }
+
+        /* Event 28: Finish phase by raising nAutoFd */
+      set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor);
+
+      return 0;
+}
+
+static DEFINE_SPINLOCK(bpp_open_lock);
+
+/*
+ * Allow only one process to open the device at a time.
+ */
+static int bpp_open(struct inode *inode, struct file *f)
+{
+      unsigned minor = iminor(inode);
+      int ret;
+
+      spin_lock(&bpp_open_lock);
+      ret = 0;
+      if (minor >= BPP_NO) {
+	      ret = -ENODEV;
+      } else {
+	      if (! instances[minor].present) {
+		      ret = -ENODEV;
+	      } else {
+		      if (instances[minor].opened) 
+			      ret = -EBUSY;
+		      else
+			      instances[minor].opened = 1;
+	      }
+      }
+      spin_unlock(&bpp_open_lock);
+
+      return ret;
+}
+
+/*
+ * When the process closes the device, this method is called to clean
+ * up and reset the hardware. Always leave the device in compatibility
+ * mode as this is a reasonable place to clean up from messes made by
+ * ioctls, or other mayhem.
+ */
+static int bpp_release(struct inode *inode, struct file *f)
+{
+      unsigned minor = iminor(inode);
+
+      spin_lock(&bpp_open_lock);
+      instances[minor].opened = 0;
+
+      if (instances[minor].mode != COMPATIBILITY)
+	      terminate(minor);
+
+      spin_unlock(&bpp_open_lock);
+
+      return 0;
+}
+
+static long read_nibble(unsigned minor, char __user *c, unsigned long cnt)
+{
+      unsigned long remaining = cnt;
+      long rc;
+
+      while (remaining > 0) {
+          unsigned char byte = 0;
+          int pins;
+
+          /* Event 7: request nibble */
+          set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe, minor);
+
+          /* Wait for event 9: Peripher strobes first nibble */
+          pins = wait_for(0, BPP_GP_nAck, TIME_IDLE_LIMIT, minor);
+          if (pins == -1) return -ETIMEDOUT;
+
+          /* Event 10: I handshake nibble */
+          set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe|BPP_PP_nAutoFd, minor);
+          if (pins & BPP_GP_nFault) byte |= 0x01;
+          if (pins & BPP_GP_Select) byte |= 0x02;
+          if (pins & BPP_GP_PError) byte |= 0x04;
+          if (pins & BPP_GP_Busy)   byte |= 0x08;
+
+          /* Wait for event 11: Peripheral handshakes nibble */
+          rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor);
+
+          /* Event 7: request nibble */
+          set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe, minor);
+
+          /* Wait for event 9: Peripher strobes first nibble */
+          pins = wait_for(0, BPP_GP_nAck, TIME_PResponse, minor);
+          if (rc == -1) return -ETIMEDOUT;
+
+          /* Event 10: I handshake nibble */
+          set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe|BPP_PP_nAutoFd, minor);
+          if (pins & BPP_GP_nFault) byte |= 0x10;
+          if (pins & BPP_GP_Select) byte |= 0x20;
+          if (pins & BPP_GP_PError) byte |= 0x40;
+          if (pins & BPP_GP_Busy)   byte |= 0x80;
+
+          if (put_user(byte, c))
+		  return -EFAULT;
+          c += 1;
+          remaining -= 1;
+
+          /* Wait for event 11: Peripheral handshakes nibble */
+          rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor);
+          if (rc == -1) return -EIO;
+      }
+
+      return cnt - remaining;
+}
+
+static long read_ecp(unsigned minor, char __user *c, unsigned long cnt)
+{
+      unsigned long remaining;
+      long rc;
+
+        /* Turn ECP mode from forward to reverse if needed. */
+      if (! instances[minor].direction) {
+          unsigned short pins = get_pins(minor);
+
+            /* Event 38: Turn the bus around */
+          instances[minor].direction = 0x20;
+          pins &= ~BPP_PP_nAutoFd;
+          set_pins(pins, minor);
+
+            /* Event 39: Set pins for reverse mode. */
+          snooze(TIME_PSetup, minor);
+          set_pins(BPP_PP_nStrobe|BPP_PP_nSelectIn, minor);
+
+            /* Wait for event 40: Peripheral ready to be strobed */
+          rc = wait_for(0, BPP_GP_PError, TIME_PResponse, minor);
+          if (rc == -1) return -ETIMEDOUT;
+      }
+
+      remaining = cnt;
+
+      while (remaining > 0) {
+
+            /* If there is a run length for a repeated byte, repeat */
+            /* that byte a few times. */
+          if (instances[minor].run_length && !instances[minor].run_flag) {
+
+              char buffer[128];
+              unsigned idx;
+              unsigned repeat = remaining < instances[minor].run_length
+                                     ? remaining
+                               : instances[minor].run_length;
+
+              for (idx = 0 ;  idx < repeat ;  idx += 1)
+                buffer[idx] = instances[minor].repeat_byte;
+
+              if (copy_to_user(c, buffer, repeat))
+		      return -EFAULT;
+              remaining -= repeat;
+              c += repeat;
+              instances[minor].run_length -= repeat;
+          }
+
+          if (remaining == 0) break;
+
+
+            /* Wait for Event 43: Data active on the bus. */
+          rc = wait_for(0, BPP_GP_nAck, TIME_IDLE_LIMIT, minor);
+          if (rc == -1) break;
+
+          if (rc & BPP_GP_Busy) {
+                /* OK, this is data. read it in. */
+              unsigned char byte = bpp_inb(base_addrs[minor]);
+              if (put_user(byte, c))
+		      return -EFAULT;
+              c += 1;
+              remaining -= 1;
+
+              if (instances[minor].run_flag) {
+                  instances[minor].repeat_byte = byte;
+                  instances[minor].run_flag = 0;
+              }
+
+          } else {
+              unsigned char byte = bpp_inb(base_addrs[minor]);
+              if (byte & 0x80) {
+                  printk("bpp%d: "
+                         "Ignoring ECP channel %u from device.\n",
+                         minor, byte & 0x7f);
+              } else {
+                  instances[minor].run_length = byte;
+                  instances[minor].run_flag = 1;
+              }
+          }
+
+            /* Event 44: I got it. */
+          set_pins(BPP_PP_nStrobe|BPP_PP_nAutoFd|BPP_PP_nSelectIn, minor);
+
+            /* Wait for event 45: peripheral handshake */
+          rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor);
+          if (rc == -1) return -ETIMEDOUT;
+
+             /* Event 46: Finish handshake */
+          set_pins(BPP_PP_nStrobe|BPP_PP_nSelectIn, minor);
+
+      }
+
+
+      return cnt - remaining;
+}
+
+static ssize_t bpp_read(struct file *f, char __user *c, size_t cnt, loff_t * ppos)
+{
+      long rc;
+      unsigned minor = iminor(f->f_dentry->d_inode);
+      if (minor >= BPP_NO) return -ENODEV;
+      if (!instances[minor].present) return -ENODEV;
+
+      switch (instances[minor].mode) {
+
+        default:
+          if (instances[minor].mode != COMPATIBILITY)
+            terminate(minor);
+
+          if (instances[minor].enhanced) {
+              /* For now, do all reads with ECP-RLE mode */
+              unsigned short pins;
+
+              rc = negotiate(DEFAULT_ECP, minor);
+              if (rc < 0) break;
+
+              instances[minor].mode = ECP_RLE;
+
+              /* Event 30: set nAutoFd low to setup for ECP mode */
+              pins = get_pins(minor);
+              pins &= ~BPP_PP_nAutoFd;
+              set_pins(pins, minor);
+
+              /* Wait for Event 31: peripheral ready */
+              rc = wait_for(BPP_GP_PError, 0, TIME_PResponse, minor);
+              if (rc == -1) return -ETIMEDOUT;
+
+              rc = read_ecp(minor, c, cnt);
+
+          } else {
+              rc = negotiate(DEFAULT_NIBBLE, minor);
+              if (rc < 0) break;
+
+              instances[minor].mode = NIBBLE;
+
+              rc = read_nibble(minor, c, cnt);
+          }
+          break;
+
+        case NIBBLE:
+          rc = read_nibble(minor, c, cnt);
+          break;
+
+        case ECP:
+        case ECP_RLE:
+          rc = read_ecp(minor, c, cnt);
+          break;
+
+      }
+
+
+      return rc;
+}
+
+/*
+ * Compatibility mode handshaking is a matter of writing data,
+ * strobing it, and waiting for the printer to stop being busy.
+ */
+static long write_compat(unsigned minor, const char __user *c, unsigned long cnt)
+{
+      long rc;
+      unsigned short pins = get_pins(minor);
+
+      unsigned long remaining = cnt;
+
+
+      while (remaining > 0) {
+            unsigned char byte;
+
+            if (get_user(byte, c))
+		    return -EFAULT;
+            c += 1;
+
+            rc = wait_for(BPP_GP_nAck, BPP_GP_Busy, TIME_IDLE_LIMIT, minor);
+            if (rc == -1) return -ETIMEDOUT;
+
+            bpp_outb_p(byte, base_addrs[minor]);
+            remaining -= 1;
+          /* snooze(1, minor); */
+
+          pins &= ~BPP_PP_nStrobe;
+          set_pins(pins, minor);
+
+          rc = wait_for(BPP_GP_Busy, 0, TIME_PResponse, minor);
+
+          pins |= BPP_PP_nStrobe;
+          set_pins(pins, minor);
+      }
+
+      return cnt - remaining;
+}
+
+/*
+ * Write data using ECP mode. Watch out that the port may be set up
+ * for reading. If so, turn the port around.
+ */
+static long write_ecp(unsigned minor, const char __user *c, unsigned long cnt)
+{
+      unsigned short pins = get_pins(minor);
+      unsigned long remaining = cnt;
+
+      if (instances[minor].direction) {
+          int rc;
+
+            /* Event 47 Request bus be turned around */
+          pins |= BPP_PP_nInit;
+          set_pins(pins, minor);
+
+            /* Wait for Event 49: Peripheral relinquished bus */
+          rc = wait_for(BPP_GP_PError, 0, TIME_PResponse, minor);
+
+          pins |= BPP_PP_nAutoFd;
+          instances[minor].direction = 0;
+          set_pins(pins, minor);
+      }
+
+      while (remaining > 0) {
+          unsigned char byte;
+          int rc;
+
+          if (get_user(byte, c))
+		  return -EFAULT;
+
+          rc = wait_for(0, BPP_GP_Busy, TIME_PResponse, minor);
+          if (rc == -1) return -ETIMEDOUT;
+
+          c += 1;
+
+          bpp_outb_p(byte, base_addrs[minor]);
+
+          pins &= ~BPP_PP_nStrobe;
+          set_pins(pins, minor);
+
+          pins |= BPP_PP_nStrobe;
+          rc = wait_for(BPP_GP_Busy, 0, TIME_PResponse, minor);
+          if (rc == -1) return -EIO;
+
+          set_pins(pins, minor);
+      }
+
+      return cnt - remaining;
+}
+
+/*
+ * Write to the peripheral. Be sensitive of the current mode. If I'm
+ * in a mode that can be turned around (ECP) then just do
+ * that. Otherwise, terminate and do my writing in compat mode. This
+ * is the safest course as any device can handle it.
+ */
+static ssize_t bpp_write(struct file *f, const char __user *c, size_t cnt, loff_t * ppos)
+{
+      long errno = 0;
+      unsigned minor = iminor(f->f_dentry->d_inode);
+      if (minor >= BPP_NO) return -ENODEV;
+      if (!instances[minor].present) return -ENODEV;
+
+      switch (instances[minor].mode) {
+
+        case ECP:
+        case ECP_RLE:
+          errno = write_ecp(minor, c, cnt);
+          break;
+        case COMPATIBILITY:
+          errno = write_compat(minor, c, cnt);
+          break;
+        default:
+          terminate(minor);
+          errno = write_compat(minor, c, cnt);
+      }
+
+      return errno;
+}
+
+static int bpp_ioctl(struct inode *inode, struct file *f, unsigned int cmd,
+		 unsigned long arg)
+{
+      int errno = 0;
+
+      unsigned minor = iminor(inode);
+      if (minor >= BPP_NO) return -ENODEV;
+      if (!instances[minor].present) return -ENODEV;
+
+
+      switch (cmd) {
+
+        case BPP_PUT_PINS:
+          set_pins(arg, minor);
+          break;
+
+        case BPP_GET_PINS:
+          errno = get_pins(minor);
+          break;
+
+        case BPP_PUT_DATA:
+          bpp_outb_p(arg, base_addrs[minor]);
+          break;
+
+        case BPP_GET_DATA:
+          errno = bpp_inb_p(base_addrs[minor]);
+          break;
+
+        case BPP_SET_INPUT:
+          if (arg)
+            if (instances[minor].enhanced) {
+                unsigned short bits = get_pins(minor);
+                instances[minor].direction = 0x20;
+                set_pins(bits, minor);
+            } else {
+                errno = -ENOTTY;
+            }
+          else {
+              unsigned short bits = get_pins(minor);
+              instances[minor].direction = 0x00;
+              set_pins(bits, minor);
+          }
+          break;
+
+        default:
+            errno = -EINVAL;
+      }
+
+      return errno;
+}
+
+static struct file_operations bpp_fops = {
+	.owner =	THIS_MODULE,
+	.read =		bpp_read,
+	.write =	bpp_write,
+	.ioctl =	bpp_ioctl,
+	.open =		bpp_open,
+	.release =	bpp_release,
+};
+
+#if defined(__i386__)
+
+#define collectLptPorts()  {}
+
+static void probeLptPort(unsigned idx)
+{
+      unsigned int testvalue;
+      const unsigned short lpAddr = base_addrs[idx];
+
+      instances[idx].present = 0;
+      instances[idx].enhanced = 0;
+      instances[idx].direction = 0;
+      instances[idx].mode = COMPATIBILITY;
+      instances[idx].wait_queue = 0;
+      instances[idx].run_length = 0;
+      instances[idx].run_flag = 0;
+      init_timer(&instances[idx].timer_list);
+      instances[idx].timer_list.function = bpp_wake_up;
+      if (!request_region(lpAddr,3, dev_name)) return;
+
+      /*
+       * First, make sure the instance exists. Do this by writing to
+       * the data latch and reading the value back. If the port *is*
+       * present, test to see if it supports extended-mode
+       * operation. This will be required for IEEE1284 reverse
+       * transfers.
+       */
+
+      outb_p(BPP_PROBE_CODE, lpAddr);
+      for (testvalue=0; testvalue<BPP_DELAY; testvalue++)
+            ;
+      testvalue = inb_p(lpAddr);
+      if (testvalue == BPP_PROBE_CODE) {
+            unsigned save;
+            instances[idx].present = 1;
+
+            save = inb_p(lpAddr+2);
+            for (testvalue=0; testvalue<BPP_DELAY; testvalue++)
+                  ;
+            outb_p(save|0x20, lpAddr+2);
+            for (testvalue=0; testvalue<BPP_DELAY; testvalue++)
+                  ;
+            outb_p(~BPP_PROBE_CODE, lpAddr);
+            for (testvalue=0; testvalue<BPP_DELAY; testvalue++)
+                  ;
+            testvalue = inb_p(lpAddr);
+            if ((testvalue&0xff) == (0xff&~BPP_PROBE_CODE))
+                  instances[idx].enhanced = 0;
+            else
+                  instances[idx].enhanced = 1;
+            outb_p(save, lpAddr+2);
+      }
+      else {
+            release_region(lpAddr,3);
+      }
+      /*
+       * Leave the port in compat idle mode.
+       */
+      set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, idx);
+
+      printk("bpp%d: Port at 0x%03x: Enhanced mode %s\n", idx, base_addrs[idx],
+            instances[idx].enhanced? "SUPPORTED" : "UNAVAILABLE");
+}
+
+static inline void freeLptPort(int idx)
+{
+      release_region(base_addrs[idx], 3);
+}
+
+#endif
+
+#if defined(__sparc__)
+
+static void __iomem *map_bpp(struct sbus_dev *dev, int idx)
+{
+      return sbus_ioremap(&dev->resource[0], 0, BPP_SIZE, "bpp");
+}
+
+static int collectLptPorts(void)
+{
+	struct sbus_bus *bus;
+	struct sbus_dev *dev;
+	int count;
+
+	count = 0;
+	for_all_sbusdev(dev, bus) {
+		if (strcmp(dev->prom_name, "SUNW,bpp") == 0) {
+			if (count >= BPP_NO) {
+				printk(KERN_NOTICE
+				       "bpp: More than %d bpp ports,"
+				       " rest is ignored\n", BPP_NO);
+				return count;
+			}
+			base_addrs[count] = map_bpp(dev, count);
+			count++;
+		}
+	}
+	return count;
+}
+
+static void probeLptPort(unsigned idx)
+{
+      void __iomem *rp = base_addrs[idx];
+      __u32 csr;
+      char *brand;
+
+      instances[idx].present = 0;
+      instances[idx].enhanced = 0;
+      instances[idx].direction = 0;
+      instances[idx].mode = COMPATIBILITY;
+      init_waitqueue_head(&instances[idx].wait_queue);
+      instances[idx].run_length = 0;
+      instances[idx].run_flag = 0;
+      init_timer(&instances[idx].timer_list);
+      instances[idx].timer_list.function = bpp_wake_up;
+
+      if (!rp) return;
+
+      instances[idx].present = 1;
+      instances[idx].enhanced = 1;   /* Sure */
+
+      csr = sbus_readl(rp + BPP_CSR);
+      if ((csr & P_DRAINING) != 0 && (csr & P_ERR_PEND) == 0) {
+            udelay(20);
+            csr = sbus_readl(rp + BPP_CSR);
+            if ((csr & P_DRAINING) != 0 && (csr & P_ERR_PEND) == 0) {
+                  printk("bpp%d: DRAINING still active (0x%08x)\n", idx, csr);
+            }
+      }
+      printk("bpp%d: reset with 0x%08x ..", idx, csr);
+      sbus_writel((csr | P_RESET) & ~P_INT_EN, rp + BPP_CSR);
+      udelay(500);
+      sbus_writel(sbus_readl(rp + BPP_CSR) & ~P_RESET, rp + BPP_CSR);
+      csr = sbus_readl(rp + BPP_CSR);
+      printk(" done with csr=0x%08x ocr=0x%04x\n",
+         csr, sbus_readw(rp + BPP_OCR));
+
+      switch (csr & P_DEV_ID_MASK) {
+      case P_DEV_ID_ZEBRA:
+            brand = "Zebra";
+            break;
+      case P_DEV_ID_L64854:
+            brand = "DMA2";
+            break;
+      default:
+            brand = "Unknown";
+      }
+      printk("bpp%d: %s at %p\n", idx, brand, rp);
+
+      /*
+       * Leave the port in compat idle mode.
+       */
+      set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, idx);
+
+      return;
+}
+
+static inline void freeLptPort(int idx)
+{
+      sbus_iounmap(base_addrs[idx], BPP_SIZE);
+}
+
+#endif
+
+static int __init bpp_init(void)
+{
+	int rc;
+	unsigned idx;
+
+	rc = collectLptPorts();
+	if (rc == 0)
+		return -ENODEV;
+
+	rc = register_chrdev(BPP_MAJOR, dev_name, &bpp_fops);
+	if (rc < 0)
+		return rc;
+
+	for (idx = 0; idx < BPP_NO; idx++) {
+		instances[idx].opened = 0;
+		probeLptPort(idx);
+	}
+	devfs_mk_dir("bpp");
+	for (idx = 0; idx < BPP_NO; idx++) {
+		devfs_mk_cdev(MKDEV(BPP_MAJOR, idx),
+				S_IFCHR | S_IRUSR | S_IWUSR, "bpp/%d", idx);
+	}
+
+	return 0;
+}
+
+static void __exit bpp_cleanup(void)
+{
+	unsigned idx;
+
+	for (idx = 0; idx < BPP_NO; idx++)
+		devfs_remove("bpp/%d", idx);
+	devfs_remove("bpp");
+	unregister_chrdev(BPP_MAJOR, dev_name);
+
+	for (idx = 0;  idx < BPP_NO; idx++) {
+		if (instances[idx].present)
+			freeLptPort(idx);
+	}
+}
+
+module_init(bpp_init);
+module_exit(bpp_cleanup);
+
+MODULE_LICENSE("GPL");
+