s390/airq: simplify adapter interrupt code

There are three users of adapter interrupts: AP, QDIO and PCI. Each
registers a single adapter interrupt with independent ISCs. Define
a "struct airq" with the interrupt handler, a pointer and a mask for
the local summary indicator and the ISC for the adapter interrupt
source. Convert the indicator array with its fixed number of adapter
interrupt sources per ISE to an array of hlists. This removes the
limitation to 32 adapter interrupts per ISC and allows for arbitrary
memory locations for the local summary indicator.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

1 files changed, 35 insertions, 25 deletions

diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
index 0b116a49ee5..f446a7705c3 100644
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -58,7 +58,7 @@ static inline void ap_schedule_poll_timer(void);
 static int __ap_poll_device(struct ap_device *ap_dev, unsigned long *flags);
 static int ap_device_remove(struct device *dev);
 static int ap_device_probe(struct device *dev);
-static void ap_interrupt_handler(void *unused1, void *unused2);
+static void ap_interrupt_handler(struct airq_struct *airq);
 static void ap_reset(struct ap_device *ap_dev);
 static void ap_config_timeout(unsigned long ptr);
 static int ap_select_domain(void);
@@ -106,7 +106,6 @@ static DECLARE_WAIT_QUEUE_HEAD(ap_poll_wait);
 static struct task_struct *ap_poll_kthread = NULL;
 static DEFINE_MUTEX(ap_poll_thread_mutex);
 static DEFINE_SPINLOCK(ap_poll_timer_lock);
-static void *ap_interrupt_indicator;
 static struct hrtimer ap_poll_timer;
 /* In LPAR poll with 4kHz frequency. Poll every 250000 nanoseconds.
  * If z/VM change to 1500000 nanoseconds to adjust to z/VM polling.*/
@@ -120,13 +119,21 @@ static int ap_suspend_flag;
 static int user_set_domain = 0;
 static struct bus_type ap_bus_type;
 
+/* Adapter interrupt definitions */
+static int ap_airq_flag;
+
+static struct airq_struct ap_airq = {
+	.handler = ap_interrupt_handler,
+	.isc = AP_ISC,
+};
+
 /**
  * ap_using_interrupts() - Returns non-zero if interrupt support is
  * available.
  */
 static inline int ap_using_interrupts(void)
 {
-	return ap_interrupt_indicator != NULL;
+	return ap_airq_flag;
 }
 
 /**
@@ -588,7 +595,7 @@ static int ap_init_queue(ap_qid_t qid)
 		}
 	}
 	if (rc == 0 && ap_using_interrupts()) {
-		rc = ap_queue_enable_interruption(qid, ap_interrupt_indicator);
+		rc = ap_queue_enable_interruption(qid, ap_airq.lsi_ptr);
 		/* If interruption mode is supported by the machine,
 		* but an AP can not be enabled for interruption then
 		* the AP will be discarded.    */
@@ -821,13 +828,22 @@ static int ap_bus_suspend(struct device *dev, pm_message_t state)
 
 static int ap_bus_resume(struct device *dev)
 {
-	int rc = 0;
 	struct ap_device *ap_dev = to_ap_dev(dev);
+	int rc;
 
 	if (ap_suspend_flag) {
 		ap_suspend_flag = 0;
-		if (!ap_interrupts_available())
-			ap_interrupt_indicator = NULL;
+		if (ap_interrupts_available()) {
+			if (!ap_using_interrupts()) {
+				rc = register_adapter_interrupt(&ap_airq);
+				ap_airq_flag = (rc == 0);
+			}
+		} else {
+			if (ap_using_interrupts()) {
+				unregister_adapter_interrupt(&ap_airq);
+				ap_airq_flag = 0;
+			}
+		}
 		ap_query_configuration();
 		if (!user_set_domain) {
 			ap_domain_index = -1;
@@ -848,7 +864,10 @@ static int ap_bus_resume(struct device *dev)
 			tasklet_schedule(&ap_tasklet);
 		if (ap_thread_flag)
 			rc = ap_poll_thread_start();
-	}
+		else
+			rc = 0;
+	} else
+		rc = 0;
 	if (AP_QID_QUEUE(ap_dev->qid) != ap_domain_index) {
 		spin_lock_bh(&ap_dev->lock);
 		ap_dev->qid = AP_MKQID(AP_QID_DEVICE(ap_dev->qid),
@@ -1266,7 +1285,7 @@ out:
 	return rc;
 }
 
-static void ap_interrupt_handler(void *unused1, void *unused2)
+static void ap_interrupt_handler(struct airq_struct *airq)
 {
 	inc_irq_stat(IRQIO_APB);
 	tasklet_schedule(&ap_tasklet);
@@ -1722,7 +1741,7 @@ static void ap_poll_all(unsigned long dummy)
 	 * important that no requests on any AP get lost.
 	 */
 	if (ap_using_interrupts())
-		xchg((u8 *)ap_interrupt_indicator, 0);
+		xchg(ap_airq.lsi_ptr, 0);
 	do {
 		flags = 0;
 		spin_lock(&ap_device_list_lock);
@@ -1881,13 +1900,8 @@ int __init ap_module_init(void)
 		return -ENODEV;
 	}
 	if (ap_interrupts_available()) {
-		isc_register(AP_ISC);
-		ap_interrupt_indicator = s390_register_adapter_interrupt(
-			&ap_interrupt_handler, NULL, AP_ISC);
-		if (IS_ERR(ap_interrupt_indicator)) {
-			ap_interrupt_indicator = NULL;
-			isc_unregister(AP_ISC);
-		}
+		rc = register_adapter_interrupt(&ap_airq);
+		ap_airq_flag = (rc == 0);
 	}
 
 	register_reset_call(&ap_reset_call);
@@ -1955,10 +1969,8 @@ out_bus:
 	bus_unregister(&ap_bus_type);
 out:
 	unregister_reset_call(&ap_reset_call);
-	if (ap_using_interrupts()) {
-		s390_unregister_adapter_interrupt(ap_interrupt_indicator, AP_ISC);
-		isc_unregister(AP_ISC);
-	}
+	if (ap_using_interrupts())
+		unregister_adapter_interrupt(&ap_airq);
 	return rc;
 }
 
@@ -1994,10 +2006,8 @@ void ap_module_exit(void)
 		bus_remove_file(&ap_bus_type, ap_bus_attrs[i]);
 	bus_unregister(&ap_bus_type);
 	unregister_reset_call(&ap_reset_call);
-	if (ap_using_interrupts()) {
-		s390_unregister_adapter_interrupt(ap_interrupt_indicator, AP_ISC);
-		isc_unregister(AP_ISC);
-	}
+	if (ap_using_interrupts())
+		unregister_adapter_interrupt(&ap_airq);
 }
 
 module_init(ap_module_init);