Merge tag 'regulator-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates for 3.4 from Mark Brown:
 "This has been a fairly quiet release from a regulator point of view,
  the only real framework features added were devm support and a
  convenience helper for setting up fixed voltage regulators.

  We also added a couple of drivers (but will drop the BQ240022 driver
  via the arm-soc tree as it's been replaced by the more generic
  gpio-regulator driver) and Axel Lin continued his relentless and
  generally awesome stream of fixes and cleanups."

* tag 'regulator-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (93 commits)
  regulator: Fix up a confusing dev_warn when DT lookup fails
  regulator: Convert tps6507x to set_voltage_sel
  regulator: Refactor tps6507x to use one tps6507x_pmic_ops for all LDOs and DCDCs
  regulator: Make s5m8767_get_voltage_register always return correct register
  regulator: s5m8767: Check pdata->buck[2|3|4]_gpiodvs earlier
  regulator: tps65910: Provide settling time for DCDC voltage change
  regulator: Add Anatop regulator driver
  regulator: Simplify implementation of tps65912_get_voltage_dcdc
  regulator: Use tps65912_set_voltage_sel for both DCDCx and LDOx
  regulator: tps65910: Provide settling time for enabling rails
  regulator: max8925: Use DIV_ROUND_UP macro
  regulator: tps65912: Use simple equations to get register address
  regulator: Fix the logic of tps65910_get_mode
  regulator: Merge tps65217_pmic_ldo234_ops and tps65217_pmic_dcdc_ops to tps65217_pmic_ops
  regulator: Use DIV_ROUND_CLOSEST in wm8350_isink_get_current
  regulator: Use array to store dcdc_range settings for tps65912
  regulator: Rename s5m8767_convert_voltage to s5m8767_convert_voltage_to_sel
  regulator: tps6524x: Remove unneeded comment for N_REGULATORS
  regulator: Rename set_voltage_sel callback function name to *_sel
  regulator: Fix s5m8767_set_voltage_time_sel calculation value
  ...

35 files changed, 3412 insertions, 1033 deletions

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 7a61b17ddd0..a229de98ae6 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -74,13 +74,72 @@ config REGULATOR_GPIO
 	  and the platform has to provide a mapping of GPIO-states
 	  to target volts/amps.
 
-config REGULATOR_BQ24022
-	tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
+config REGULATOR_AD5398
+	tristate "Analog Devices AD5398/AD5821 regulators"
+	depends on I2C
 	help
-	  This driver controls a TI bq24022 Charger attached via
-	  GPIOs. The provided current regulator can enable/disable
-	  charging select between 100 mA and 500 mA charging current
-	  limit.
+	  This driver supports AD5398 and AD5821 current regulator chips.
+	  If building into module, its name is ad5398.ko.
+
+config REGULATOR_AAT2870
+	tristate "AnalogicTech AAT2870 Regulators"
+	depends on MFD_AAT2870_CORE
+	help
+	  If you have a AnalogicTech AAT2870 say Y to enable the
+	  regulator driver.
+
+config REGULATOR_DA903X
+	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
+	depends on PMIC_DA903X
+	help
+	  Say y here to support the BUCKs and LDOs regulators found on
+	  Dialog Semiconductor DA9030/DA9034 PMIC.
+
+config REGULATOR_DA9052
+	tristate "Dialog Semiconductor DA9052/DA9053 regulators"
+	depends on PMIC_DA9052
+	help
+	  This driver supports the voltage regulators of DA9052-BC and
+	  DA9053-AA/Bx PMIC.
+
+config REGULATOR_ANATOP
+	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
+	depends on MFD_ANATOP
+	help
+	  Say y here to support Freescale i.MX on-chip ANATOP LDOs
+	  regulators. It is recommended that this option be
+	  enabled on i.MX6 platform.
+
+config REGULATOR_MC13XXX_CORE
+	tristate
+
+config REGULATOR_MC13783
+	tristate "Freescale MC13783 regulator driver"
+	depends on MFD_MC13783
+	select REGULATOR_MC13XXX_CORE
+	help
+	  Say y here to support the regulators found on the Freescale MC13783
+	  PMIC.
+
+config REGULATOR_MC13892
+	tristate "Freescale MC13892 regulator driver"
+	depends on MFD_MC13XXX
+	select REGULATOR_MC13XXX_CORE
+	help
+	  Say y here to support the regulators found on the Freescale MC13892
+	  PMIC.
+
+config REGULATOR_ISL6271A
+	tristate "Intersil ISL6271A Power regulator"
+	depends on I2C
+	help
+	  This driver supports ISL6271A voltage regulator chip.
+
+config REGULATOR_88PM8607
+	bool "Marvell 88PM8607 Power regulators"
+	depends on MFD_88PM860X=y
+	help
+	  This driver supports 88PM8607 voltage regulator chips.
 
 config REGULATOR_MAX1586
 	tristate "Maxim 1586/1587 voltage regulator"
@@ -136,61 +195,12 @@ config REGULATOR_MAX8998
 	  via I2C bus. The provided regulator is suitable for S3C6410
 	  and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
 
-config REGULATOR_TWL4030
-	bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
-	depends on TWL4030_CORE
-	help
-	  This driver supports the voltage regulators provided by
-	  this family of companion chips.
-
-config REGULATOR_WM831X
-	tristate "Wolfson Microelcronics WM831x PMIC regulators"
-	depends on MFD_WM831X
-	help
-	  Support the voltage and current regulators of the WM831x series
-	  of PMIC devices.
-
-config REGULATOR_WM8350
-	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
-	depends on MFD_WM8350
-	help
-	  This driver provides support for the voltage and current regulators
-          of the WM8350 AudioPlus PMIC.
-
-config REGULATOR_WM8400
-	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
-	depends on MFD_WM8400
-	help
-	  This driver provides support for the voltage regulators of the
-	  WM8400 AudioPlus PMIC.
-
-config REGULATOR_WM8994
-	tristate "Wolfson Microelectronics WM8994 CODEC"
-	depends on MFD_WM8994
-	help
-	  This driver provides support for the voltage regulators on the
-	  WM8994 CODEC.
-
-config REGULATOR_DA903X
-	tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC"
-	depends on PMIC_DA903X
-	help
-	  Say y here to support the BUCKs and LDOs regulators found on
-	  Dialog Semiconductor DA9030/DA9034 PMIC.
-
-config REGULATOR_DA9052
-	tristate "Dialog DA9052/DA9053 regulators"
-	depends on PMIC_DA9052
-	help
-	  This driver supports the voltage regulators of DA9052-BC and
-	  DA9053-AA/Bx PMIC.
-
-config REGULATOR_PCF50633
-	tristate "PCF50633 regulator driver"
-        depends on MFD_PCF50633
+config REGULATOR_PCAP
+	tristate "Motorola PCAP2 regulator driver"
+	depends on EZX_PCAP
 	help
-	 Say Y here to support the voltage regulators and convertors
-	 on PCF50633
+	 This driver provides support for the voltage regulators of the
+	 PCAP2 PMIC.
 
 config REGULATOR_LP3971
 	tristate "National Semiconductors LP3971 PMIC regulator driver"
@@ -206,31 +216,20 @@ config REGULATOR_LP3972
 	 Say Y here to support the voltage regulators and convertors
 	 on National Semiconductors LP3972 PMIC
 
-config REGULATOR_PCAP
-	tristate "PCAP2 regulator driver"
-	depends on EZX_PCAP
-	help
-	 This driver provides support for the voltage regulators of the
-	 PCAP2 PMIC.
-
-config REGULATOR_MC13XXX_CORE
-	tristate
-
-config REGULATOR_MC13783
-	tristate "Support regulators on Freescale MC13783 PMIC"
-	depends on MFD_MC13783
-	select REGULATOR_MC13XXX_CORE
+config REGULATOR_PCF50633
+	tristate "NXP PCF50633 regulator driver"
+        depends on MFD_PCF50633
 	help
-	  Say y here to support the regulators found on the Freescale MC13783
-	  PMIC.
+	 Say Y here to support the voltage regulators and convertors
+	 on PCF50633
 
-config REGULATOR_MC13892
-	tristate "Support regulators on Freescale MC13892 PMIC"
-	depends on MFD_MC13XXX
-	select REGULATOR_MC13XXX_CORE
+config REGULATOR_S5M8767
+	tristate "Samsung S5M8767A voltage regulator"
+	depends on MFD_S5M_CORE
 	help
-	  Say y here to support the regulators found on the Freescale MC13892
-	  PMIC.
+	 This driver supports a Samsung S5M8767A voltage output regulator
+	 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
+	 supports DVS mode with 8bits of output voltage control.
 
 config REGULATOR_AB3100
 	tristate "ST-Ericsson AB3100 Regulator functions"
@@ -241,6 +240,32 @@ config REGULATOR_AB3100
 	 AB3100 analog baseband dealing with power regulators
 	 for the system.
 
+config REGULATOR_AB8500
+	bool "ST-Ericsson AB8500 Power Regulators"
+	depends on AB8500_CORE
+	help
+	  This driver supports the regulators found on the ST-Ericsson mixed
+	  signal AB8500 PMIC
+
+config REGULATOR_DBX500_PRCMU
+	bool
+
+config REGULATOR_DB8500_PRCMU
+	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
+	depends on MFD_DB8500_PRCMU
+	select REGULATOR_DBX500_PRCMU
+	help
+	  This driver supports the voltage domain regulators controlled by the
+	  DB8500 PRCMU
+
+config REGULATOR_BQ24022
+	tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
+	help
+	  This driver controls a TI bq24022 Charger attached via
+	  GPIOs. The provided current regulator can enable/disable
+	  charging select between 100 mA and 500 mA charging current
+	  limit.
+
 config REGULATOR_TPS6105X
 	tristate "TI TPS6105X Power regulators"
 	depends on TPS6105X
@@ -250,6 +275,16 @@ config REGULATOR_TPS6105X
 	  It is a single boost converter primarily for white LEDs and
 	  audio amplifiers.
 
+config REGULATOR_TPS62360
+	tristate "TI TPS62360 Power Regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver supports TPS62360 voltage regulator chip. This
+	  regulator is meant for processor core supply. This chip is
+	  high-frequency synchronous step down dc-dc converter optimized
+	  for battery-powered portable applications.
+
 config REGULATOR_TPS65023
 	tristate "TI TPS65023 Power regulators"
 	depends on I2C
@@ -267,73 +302,77 @@ config REGULATOR_TPS6507X
 	  three step-down converters and two general-purpose LDO voltage regulators.
 	  It supports TI's software based Class-2 SmartReflex implementation.
 
-config REGULATOR_TPS65912
-	tristate "TI TPS65912 Power regulator"
-	depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
+config REGULATOR_TPS65217
+	tristate "TI TPS65217 Power regulators"
+	depends on MFD_TPS65217
 	help
-	    This driver supports TPS65912 voltage regulator chip.
+	  This driver supports TPS65217 voltage regulator chips. TPS65217
+	  provides three step-down converters and four general-purpose LDO
+	  voltage regulators. It supports software based voltage control
+	  for different voltage domains
 
-config REGULATOR_88PM8607
-	bool "Marvell 88PM8607 Power regulators"
-	depends on MFD_88PM860X=y
+config REGULATOR_TPS6524X
+	tristate "TI TPS6524X Power regulators"
+	depends on SPI
 	help
-	  This driver supports 88PM8607 voltage regulator chips.
+	  This driver supports TPS6524X voltage regulator chips. TPS6524X
+	  provides three step-down converters and two general-purpose LDO
+	  voltage regulators.  This device is interfaced using a customized
+	  serial interface currently supported on the sequencer serial
+	  port controller.
 
-config REGULATOR_ISL6271A
-	tristate "Intersil ISL6271A Power regulator"
-	depends on I2C
+config REGULATOR_TPS6586X
+	tristate "TI TPS6586X Power regulators"
+	depends on MFD_TPS6586X
 	help
-	  This driver supports ISL6271A voltage regulator chip.
+	  This driver supports TPS6586X voltage regulator chips.
 
-config REGULATOR_AD5398
-	tristate "Analog Devices AD5398/AD5821 regulators"
-	depends on I2C
+config REGULATOR_TPS65910
+	tristate "TI TPS65910/TPS65911 Power Regulators"
+	depends on MFD_TPS65910
 	help
-	  This driver supports AD5398 and AD5821 current regulator chips.
-	  If building into module, its name is ad5398.ko.
+	  This driver supports TPS65910/TPS65911 voltage regulator chips.
 
-config REGULATOR_AB8500
-	bool "ST-Ericsson AB8500 Power Regulators"
-	depends on AB8500_CORE
+config REGULATOR_TPS65912
+	tristate "TI TPS65912 Power regulator"
+	depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
 	help
-	  This driver supports the regulators found on the ST-Ericsson mixed
-	  signal AB8500 PMIC
+	    This driver supports TPS65912 voltage regulator chip.
 
-config REGULATOR_DB8500_PRCMU
-	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
-	depends on MFD_DB8500_PRCMU
+config REGULATOR_TWL4030
+	bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
+	depends on TWL4030_CORE
 	help
-	  This driver supports the voltage domain regulators controlled by the
-	  DB8500 PRCMU
+	  This driver supports the voltage regulators provided by
+	  this family of companion chips.
 
-config REGULATOR_TPS6586X
-	tristate "TI TPS6586X Power regulators"
-	depends on MFD_TPS6586X
+config REGULATOR_WM831X
+	tristate "Wolfson Microelectronics WM831x PMIC regulators"
+	depends on MFD_WM831X
 	help
-	  This driver supports TPS6586X voltage regulator chips.
+	  Support the voltage and current regulators of the WM831x series
+	  of PMIC devices.
 
-config REGULATOR_TPS6524X
-	tristate "TI TPS6524X Power regulators"
-	depends on SPI
+config REGULATOR_WM8350
+	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
+	depends on MFD_WM8350
 	help
-	  This driver supports TPS6524X voltage regulator chips. TPS6524X
-	  provides three step-down converters and two general-purpose LDO
-	  voltage regulators.  This device is interfaced using a customized
-	  serial interface currently supported on the sequencer serial
-	  port controller.
+	  This driver provides support for the voltage and current regulators
+          of the WM8350 AudioPlus PMIC.
 
-config REGULATOR_TPS65910
-	tristate "TI TPS65910 Power Regulator"
-	depends on MFD_TPS65910
+config REGULATOR_WM8400
+	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
+	depends on MFD_WM8400
 	help
-	  This driver supports TPS65910 voltage regulator chips.
+	  This driver provides support for the voltage regulators of the
+	  WM8400 AudioPlus PMIC.
 
-config REGULATOR_AAT2870
-	tristate "AnalogicTech AAT2870 Regulators"
-	depends on MFD_AAT2870_CORE
+config REGULATOR_WM8994
+	tristate "Wolfson Microelectronics WM8994 CODEC"
+	depends on MFD_WM8994
 	help
-	  If you have a AnalogicTech AAT2870 say Y to enable the
-	  regulator driver.
+	  This driver provides support for the voltage regulators on the
+	  WM8994 CODEC.
 
 endif
 
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 503bac87715..b5042c885d8 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -3,50 +3,56 @@
 #
 
 
-obj-$(CONFIG_REGULATOR) += core.o dummy.o
+obj-$(CONFIG_REGULATOR) += core.o dummy.o fixed-helper.o
 obj-$(CONFIG_OF) += of_regulator.o
 obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
 obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
 obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
 
 obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
+obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
+obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
+obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
+obj-$(CONFIG_REGULATOR_AB8500)	+= ab8500.o
 obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
+obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
 obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
+obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
+obj-$(CONFIG_REGULATOR_DA9052)	+= da9052-regulator.o
+obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o
+obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
+obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
 obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
 obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o
 obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
-obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8649)	+= max8649.o
 obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
 obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o
 obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o
 obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
-obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
-obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
-obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
-obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
-obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
-obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o
-obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o
-obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
-obj-$(CONFIG_REGULATOR_DA9052)	+= da9052-regulator.o
-obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
-obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
 obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
 obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
 obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
-obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
+obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
+obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
+obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
 obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o
+obj-$(CONFIG_REGULATOR_TPS62360) += tps62360-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o
 obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o
+obj-$(CONFIG_REGULATOR_TPS65217) += tps65217-regulator.o
 obj-$(CONFIG_REGULATOR_TPS6524X) += tps6524x-regulator.o
-obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o
-obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
-obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
-obj-$(CONFIG_REGULATOR_AB8500)	+= ab8500.o
-obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
+obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o
-obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
+obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o
+obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o
+obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
+obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
+obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
+obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
+obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
+obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o
+
 
 ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
diff --git a/drivers/regulator/aat2870-regulator.c b/drivers/regulator/aat2870-regulator.c
index 685ad43b074..9ed5c5d84e1 100644
--- a/drivers/regulator/aat2870-regulator.c
+++ b/drivers/regulator/aat2870-regulator.c
@@ -31,7 +31,7 @@
 #include <linux/mfd/aat2870.h>
 
 struct aat2870_regulator {
-	struct platform_device *pdev;
+	struct aat2870_data *aat2870;
 	struct regulator_desc desc;
 
 	const int *voltages; /* uV */
@@ -60,7 +60,7 @@ static int aat2870_ldo_set_voltage_sel(struct regulator_dev *rdev,
 				       unsigned selector)
 {
 	struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
-	struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+	struct aat2870_data *aat2870 = ri->aat2870;
 
 	return aat2870->update(aat2870, ri->voltage_addr, ri->voltage_mask,
 			       selector << ri->voltage_shift);
@@ -69,7 +69,7 @@ static int aat2870_ldo_set_voltage_sel(struct regulator_dev *rdev,
 static int aat2870_ldo_get_voltage_sel(struct regulator_dev *rdev)
 {
 	struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
-	struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+	struct aat2870_data *aat2870 = ri->aat2870;
 	u8 val;
 	int ret;
 
@@ -83,7 +83,7 @@ static int aat2870_ldo_get_voltage_sel(struct regulator_dev *rdev)
 static int aat2870_ldo_enable(struct regulator_dev *rdev)
 {
 	struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
-	struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+	struct aat2870_data *aat2870 = ri->aat2870;
 
 	return aat2870->update(aat2870, ri->enable_addr, ri->enable_mask,
 			       ri->enable_mask);
@@ -92,7 +92,7 @@ static int aat2870_ldo_enable(struct regulator_dev *rdev)
 static int aat2870_ldo_disable(struct regulator_dev *rdev)
 {
 	struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
-	struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+	struct aat2870_data *aat2870 = ri->aat2870;
 
 	return aat2870->update(aat2870, ri->enable_addr, ri->enable_mask, 0);
 }
@@ -100,7 +100,7 @@ static int aat2870_ldo_disable(struct regulator_dev *rdev)
 static int aat2870_ldo_is_enabled(struct regulator_dev *rdev)
 {
 	struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
-	struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+	struct aat2870_data *aat2870 = ri->aat2870;
 	u8 val;
 	int ret;
 
@@ -185,7 +185,7 @@ static int aat2870_regulator_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "Invalid device ID, %d\n", pdev->id);
 		return -EINVAL;
 	}
-	ri->pdev = pdev;
+	ri->aat2870 = dev_get_drvdata(pdev->dev.parent);
 
 	rdev = regulator_register(&ri->desc, &pdev->dev,
 				  pdev->dev.platform_data, ri, NULL);
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index c9b92531ae6..c7ee4c15d6f 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -201,7 +201,7 @@ static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector)
 	return info->voltages[selector];
 }
 
-static int ab8500_regulator_get_voltage(struct regulator_dev *rdev)
+static int ab8500_regulator_get_voltage_sel(struct regulator_dev *rdev)
 {
 	int ret, val;
 	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
@@ -229,11 +229,9 @@ static int ab8500_regulator_get_voltage(struct regulator_dev *rdev)
 	/* vintcore has a different layout */
 	val = regval & info->voltage_mask;
 	if (info->desc.id == AB8500_LDO_INTCORE)
-		ret = info->voltages[val >> 0x3];
+		return val >> 0x3;
 	else
-		ret = info->voltages[val];
-
-	return ret;
+		return val;
 }
 
 static int ab8500_get_best_voltage_index(struct regulator_dev *rdev,
@@ -320,7 +318,7 @@ static struct regulator_ops ab8500_regulator_ops = {
 	.enable		= ab8500_regulator_enable,
 	.disable	= ab8500_regulator_disable,
 	.is_enabled	= ab8500_regulator_is_enabled,
-	.get_voltage	= ab8500_regulator_get_voltage,
+	.get_voltage_sel = ab8500_regulator_get_voltage_sel,
 	.set_voltage	= ab8500_regulator_set_voltage,
 	.list_voltage	= ab8500_list_voltage,
 	.enable_time	= ab8500_regulator_enable_time,
diff --git a/drivers/regulator/ad5398.c b/drivers/regulator/ad5398.c
index 483c8093085..26d23adfc66 100644
--- a/drivers/regulator/ad5398.c
+++ b/drivers/regulator/ad5398.c
@@ -94,8 +94,8 @@ static int ad5398_set_current_limit(struct regulator_dev *rdev, int min_uA, int
 	if (max_uA > chip->max_uA || max_uA < chip->min_uA)
 		return -EINVAL;
 
-	selector = ((min_uA - chip->min_uA) * chip->current_level +
-			range_uA - 1) / range_uA;
+	selector = DIV_ROUND_UP((min_uA - chip->min_uA) * chip->current_level,
+				range_uA);
 	if (ad5398_calc_current(chip, selector) > max_uA)
 		return -EINVAL;
 
diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
new file mode 100644
index 00000000000..17499a55113
--- /dev/null
+++ b/drivers/regulator/anatop-regulator.c
@@ -0,0 +1,241 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/mfd/anatop.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+struct anatop_regulator {
+	const char *name;
+	u32 control_reg;
+	struct anatop *mfd;
+	int vol_bit_shift;
+	int vol_bit_width;
+	int min_bit_val;
+	int min_voltage;
+	int max_voltage;
+	struct regulator_desc rdesc;
+	struct regulator_init_data *initdata;
+};
+
+static int anatop_set_voltage(struct regulator_dev *reg, int min_uV,
+				  int max_uV, unsigned *selector)
+{
+	struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
+	u32 val, sel;
+	int uv;
+
+	uv = min_uV;
+	dev_dbg(&reg->dev, "%s: uv %d, min %d, max %d\n", __func__,
+		uv, anatop_reg->min_voltage,
+		anatop_reg->max_voltage);
+
+	if (uv < anatop_reg->min_voltage) {
+		if (max_uV > anatop_reg->min_voltage)
+			uv = anatop_reg->min_voltage;
+		else
+			return -EINVAL;
+	}
+
+	if (!anatop_reg->control_reg)
+		return -ENOTSUPP;
+
+	sel = DIV_ROUND_UP(uv - anatop_reg->min_voltage, 25000);
+	if (sel * 25000 + anatop_reg->min_voltage > anatop_reg->max_voltage)
+		return -EINVAL;
+	val = anatop_reg->min_bit_val + sel;
+	*selector = sel;
+	dev_dbg(&reg->dev, "%s: calculated val %d\n", __func__, val);
+	anatop_set_bits(anatop_reg->mfd,
+			anatop_reg->control_reg,
+			anatop_reg->vol_bit_shift,
+			anatop_reg->vol_bit_width,
+			val);
+
+	return 0;
+}
+
+static int anatop_get_voltage_sel(struct regulator_dev *reg)
+{
+	struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
+	u32 val;
+
+	if (!anatop_reg->control_reg)
+		return -ENOTSUPP;
+
+	val = anatop_get_bits(anatop_reg->mfd,
+			      anatop_reg->control_reg,
+			      anatop_reg->vol_bit_shift,
+			      anatop_reg->vol_bit_width);
+
+	return val - anatop_reg->min_bit_val;
+}
+
+static int anatop_list_voltage(struct regulator_dev *reg, unsigned selector)
+{
+	struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
+	int uv;
+
+	uv = anatop_reg->min_voltage + selector * 25000;
+	dev_dbg(&reg->dev, "vddio = %d, selector = %u\n", uv, selector);
+
+	return uv;
+}
+
+static struct regulator_ops anatop_rops = {
+	.set_voltage     = anatop_set_voltage,
+	.get_voltage_sel = anatop_get_voltage_sel,
+	.list_voltage    = anatop_list_voltage,
+};
+
+static int __devinit anatop_regulator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct regulator_desc *rdesc;
+	struct regulator_dev *rdev;
+	struct anatop_regulator *sreg;
+	struct regulator_init_data *initdata;
+	struct anatop *anatopmfd = dev_get_drvdata(pdev->dev.parent);
+	int ret = 0;
+
+	initdata = of_get_regulator_init_data(dev, np);
+	sreg = devm_kzalloc(dev, sizeof(*sreg), GFP_KERNEL);
+	if (!sreg)
+		return -ENOMEM;
+	sreg->initdata = initdata;
+	sreg->name = kstrdup(of_get_property(np, "regulator-name", NULL),
+			     GFP_KERNEL);
+	rdesc = &sreg->rdesc;
+	memset(rdesc, 0, sizeof(*rdesc));
+	rdesc->name = sreg->name;
+	rdesc->ops = &anatop_rops;
+	rdesc->type = REGULATOR_VOLTAGE;
+	rdesc->owner = THIS_MODULE;
+	sreg->mfd = anatopm