Merge tag 'for-v3.9' of git://git.infradead.org/battery-2.6

Pull battery updates from Anton Vorontsov:
 "Four new drivers:

   - goldfish_battery:

     This is Android Emulator battery driver.  Originally from Google,
     but Intel folks reshaped it for mainline

   - pm2301_charger:

     A new driver for ST-Ericsson 2301 Power Management chip, uses
     AB8500 battery management core

   - qnap-poweroff:

     The driver adds poweroff functionality for QNAP NAS boxes

   - restart-poweroff:

     A generic driver that implements 'power off by restarting'.  The
     actual poweroff functionality is implemented through a bootloader,
     so Linux' task is just to restart the box.  The driver is useful on
     Buffalo Linkstation LS-XHL and LS-CHLv2 boards.  Andrew Lunn worked
     on submitting the driver (as well as qnap-poweroff above).

  Additionally:

   - A lot of fixes for ab8500 drivers.  This is a part of efforts of
     syncing internal ST-Ericsson development tree with the mainline.
     Lee Jones @ Linaro worked on compilation and reshaping these
     series.

   - New health properties for the power supplies: "Watchdog timer
     expire" and "Safety timer expire"

   - As usual, a bunch of fixes/cleanups here and there"

* tag 'for-v3.9' of git://git.infradead.org/battery-2.6: (81 commits)
  bq2415x_charger: Add support for offline and 100mA mode
  generic-adc-battery: Fix forever loop in gab_remove()
  goldfish_battery: Add missing GENERIC_HARDIRQS dependency
  da9030_battery: Include notifier.h
  bq27x00_battery: Fix reporting battery temperature
  power/reset: Remove newly introduced __dev* annotations
  lp8727_charger: Small cleanup in naming
  ab8500_btemp: Demote initcall sequence
  ds2782_battery: Add power_supply_changed() calls for proper uevent support
  power: Add battery driver for goldfish emulator
  u8500-charger: Delay for USB enumeration
  ab8500-bm: Remove individual [charger|btemp|fg|chargalg] pdata structures
  ab8500-charger: Do not touch VBUSOVV bits
  ab8500-fg: Use correct battery charge full design
  pm2301: LPN mode control support
  pm2301: Enable vbat low monitoring
  ab8500-bm: Flush all work queues before suspending
  ab8500-fg: Go to INIT_RECOVERY when charger removed
  ab8500-charger: Add support for autopower on AB8505 and AB9540
  abx500-chargalg: Add new sysfs interface to get current charge status
  ...

Fix up fairly straightforward conflicts in the ab8500 driver.  But since
it seems to be ARM-specific, I can't even compile-test the result..

26 files changed, 4044 insertions, 954 deletions

diff --git a/drivers/power/88pm860x_battery.c b/drivers/power/88pm860x_battery.c
index 8bc80b05c63..d338c1c4e8c 100644
--- a/drivers/power/88pm860x_battery.c
+++ b/drivers/power/88pm860x_battery.c
@@ -915,15 +915,13 @@ static int pm860x_battery_probe(struct platform_device *pdev)
 	info->irq_cc = platform_get_irq(pdev, 0);
 	if (info->irq_cc <= 0) {
 		dev_err(&pdev->dev, "No IRQ resource!\n");
-		ret = -EINVAL;
-		goto out;
+		return -EINVAL;
 	}
 
 	info->irq_batt = platform_get_irq(pdev, 1);
 	if (info->irq_batt <= 0) {
 		dev_err(&pdev->dev, "No IRQ resource!\n");
-		ret = -EINVAL;
-		goto out;
+		return -EINVAL;
 	}
 
 	info->chip = chip;
@@ -957,7 +955,7 @@ static int pm860x_battery_probe(struct platform_device *pdev)
 
 	ret = power_supply_register(&pdev->dev, &info->battery);
 	if (ret)
-		goto out;
+		return ret;
 	info->battery.dev->parent = &pdev->dev;
 
 	ret = request_threaded_irq(info->irq_cc, NULL,
@@ -984,8 +982,6 @@ out_coulomb:
 	free_irq(info->irq_cc, info);
 out_reg:
 	power_supply_unregister(&info->battery);
-out:
-	kfree(info);
 	return ret;
 }
 
@@ -993,10 +989,9 @@ static int pm860x_battery_remove(struct platform_device *pdev)
 {
 	struct pm860x_battery_info *info = platform_get_drvdata(pdev);
 
-	power_supply_unregister(&info->battery);
 	free_irq(info->irq_batt, info);
 	free_irq(info->irq_cc, info);
-	kfree(info);
+	power_supply_unregister(&info->battery);
 	platform_set_drvdata(pdev, NULL);
 	return 0;
 }
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 9f45e2f77d5..9e00c389e77 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -346,6 +346,20 @@ config AB8500_BM
 	help
 	  Say Y to include support for AB8500 battery management.
 
+config BATTERY_GOLDFISH
+	tristate "Goldfish battery driver"
+	depends on GENERIC_HARDIRQS
+	help
+	  Say Y to enable support for the battery and AC power in the
+	  Goldfish emulator.
+
+config CHARGER_PM2301
+	bool "PM2301 Battery Charger Driver"
+	depends on AB8500_BM
+	help
+	  Say Y to include support for PM2301 charger driver.
+	  Depends on AB8500 battery management core.
+
 source "drivers/power/reset/Kconfig"
 
 endif # POWER_SUPPLY
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 22c8913382c..3f66436af45 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_BATTERY_DS2760)	+= ds2760_battery.o
 obj-$(CONFIG_BATTERY_DS2780)	+= ds2780_battery.o
 obj-$(CONFIG_BATTERY_DS2781)	+= ds2781_battery.o
 obj-$(CONFIG_BATTERY_DS2782)	+= ds2782_battery.o
+obj-$(CONFIG_BATTERY_GOLDFISH)	+= goldfish_battery.o
 obj-$(CONFIG_BATTERY_PMU)	+= pmu_battery.o
 obj-$(CONFIG_BATTERY_OLPC)	+= olpc_battery.o
 obj-$(CONFIG_BATTERY_TOSA)	+= tosa_battery.o
@@ -38,7 +39,7 @@ obj-$(CONFIG_CHARGER_PCF50633)	+= pcf50633-charger.o
 obj-$(CONFIG_BATTERY_JZ4740)	+= jz4740-battery.o
 obj-$(CONFIG_BATTERY_INTEL_MID)	+= intel_mid_battery.o
 obj-$(CONFIG_BATTERY_RX51)	+= rx51_battery.o
-obj-$(CONFIG_AB8500_BM)		+= ab8500_bmdata.o ab8500_charger.o ab8500_btemp.o ab8500_fg.o abx500_chargalg.o
+obj-$(CONFIG_AB8500_BM)		+= ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o
 obj-$(CONFIG_CHARGER_ISP1704)	+= isp1704_charger.o
 obj-$(CONFIG_CHARGER_MAX8903)	+= max8903_charger.o
 obj-$(CONFIG_CHARGER_TWL4030)	+= twl4030_charger.o
@@ -46,6 +47,7 @@ obj-$(CONFIG_CHARGER_LP8727)	+= lp8727_charger.o
 obj-$(CONFIG_CHARGER_LP8788)	+= lp8788-charger.o
 obj-$(CONFIG_CHARGER_GPIO)	+= gpio-charger.o
 obj-$(CONFIG_CHARGER_MANAGER)	+= charger-manager.o
+obj-$(CONFIG_CHARGER_PM2301)	+= pm2301_charger.o
 obj-$(CONFIG_CHARGER_MAX8997)	+= max8997_charger.o
 obj-$(CONFIG_CHARGER_MAX8998)	+= max8998_charger.o
 obj-$(CONFIG_CHARGER_BQ2415X)	+= bq2415x_charger.o
diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c
index f034ae43e04..7a96c0650fb 100644
--- a/drivers/power/ab8500_bmdata.c
+++ b/drivers/power/ab8500_bmdata.c
@@ -182,206 +182,206 @@ static struct batres_vs_temp temp_to_batres_tbl_9100[] = {
 };
 
 static struct abx500_battery_type bat_type_thermistor[] = {
-[BATTERY_UNKNOWN] = {
-	/* First element always represent the UNKNOWN battery */
-	.name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
-	.resis_high = 0,
-	.resis_low = 0,
-	.battery_resistance = 300,
-	.charge_full_design = 612,
-	.nominal_voltage = 3700,
-	.termination_vol = 4050,
-	.termination_curr = 200,
-	.recharge_vol = 3990,
-	.normal_cur_lvl = 400,
-	.normal_vol_lvl = 4100,
-	.maint_a_cur_lvl = 400,
-	.maint_a_vol_lvl = 4050,
-	.maint_a_chg_timer_h = 60,
-	.maint_b_cur_lvl = 400,
-	.maint_b_vol_lvl = 4000,
-	.maint_b_chg_timer_h = 200,
-	.low_high_cur_lvl = 300,
-	.low_high_vol_lvl = 4000,
-	.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
-	.r_to_t_tbl = temp_tbl,
-	.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
-	.v_to_cap_tbl = cap_tbl,
-	.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
-	.batres_tbl = temp_to_batres_tbl_thermistor,
-},
-{
-	.name = POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.resis_high = 53407,
-	.resis_low = 12500,
-	.battery_resistance = 300,
-	.charge_full_design = 900,
-	.nominal_voltage = 3600,
-	.termination_vol = 4150,
-	.termination_curr = 80,
-	.recharge_vol = 4130,
-	.normal_cur_lvl = 700,
-	.normal_vol_lvl = 4200,
-	.maint_a_cur_lvl = 600,
-	.maint_a_vol_lvl = 4150,
-	.maint_a_chg_timer_h = 60,
-	.maint_b_cur_lvl = 600,
-	.maint_b_vol_lvl = 4100,
-	.maint_b_chg_timer_h = 200,
-	.low_high_cur_lvl = 300,
-	.low_high_vol_lvl = 4000,
-	.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_A_thermistor),
-	.r_to_t_tbl = temp_tbl_A_thermistor,
-	.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_A_thermistor),
-	.v_to_cap_tbl = cap_tbl_A_thermistor,
-	.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
-	.batres_tbl = temp_to_batres_tbl_thermistor,
+	[BATTERY_UNKNOWN] = {
+		/* First element always represent the UNKNOWN battery */
+		.name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
+		.resis_high = 0,
+		.resis_low = 0,
+		.battery_resistance = 300,
+		.charge_full_design = 612,
+		.nominal_voltage = 3700,
+		.termination_vol = 4050,
+		.termination_curr = 200,
+		.recharge_cap = 95,
+		.normal_cur_lvl = 400,
+		.normal_vol_lvl = 4100,
+		.maint_a_cur_lvl = 400,
+		.maint_a_vol_lvl = 4050,
+		.maint_a_chg_timer_h = 60,
+		.maint_b_cur_lvl = 400,
+		.maint_b_vol_lvl = 4000,
+		.maint_b_chg_timer_h = 200,
+		.low_high_cur_lvl = 300,
+		.low_high_vol_lvl = 4000,
+		.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+		.r_to_t_tbl = temp_tbl,
+		.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+		.v_to_cap_tbl = cap_tbl,
+		.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+		.batres_tbl = temp_to_batres_tbl_thermistor,
+	},
+	{
+		.name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+		.resis_high = 53407,
+		.resis_low = 12500,
+		.battery_resistance = 300,
+		.charge_full_design = 900,
+		.nominal_voltage = 3600,
+		.termination_vol = 4150,
+		.termination_curr = 80,
+		.recharge_cap = 95,
+		.normal_cur_lvl = 700,
+		.normal_vol_lvl = 4200,
+		.maint_a_cur_lvl = 600,
+		.maint_a_vol_lvl = 4150,
+		.maint_a_chg_timer_h = 60,
+		.maint_b_cur_lvl = 600,
+		.maint_b_vol_lvl = 4100,
+		.maint_b_chg_timer_h = 200,
+		.low_high_cur_lvl = 300,
+		.low_high_vol_lvl = 4000,
+		.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_A_thermistor),
+		.r_to_t_tbl = temp_tbl_A_thermistor,
+		.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_A_thermistor),
+		.v_to_cap_tbl = cap_tbl_A_thermistor,
+		.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+		.batres_tbl = temp_to_batres_tbl_thermistor,
 
-},
-{
-	.name = POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.resis_high = 200000,
-	.resis_low = 82869,
-	.battery_resistance = 300,
-	.charge_full_design = 900,
-	.nominal_voltage = 3600,
-	.termination_vol = 4150,
-	.termination_curr = 80,
-	.recharge_vol = 4130,
-	.normal_cur_lvl = 700,
-	.normal_vol_lvl = 4200,
-	.maint_a_cur_lvl = 600,
-	.maint_a_vol_lvl = 4150,
-	.maint_a_chg_timer_h = 60,
-	.maint_b_cur_lvl = 600,
-	.maint_b_vol_lvl = 4100,
-	.maint_b_chg_timer_h = 200,
-	.low_high_cur_lvl = 300,
-	.low_high_vol_lvl = 4000,
-	.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_B_thermistor),
-	.r_to_t_tbl = temp_tbl_B_thermistor,
-	.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_B_thermistor),
-	.v_to_cap_tbl = cap_tbl_B_thermistor,
-	.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
-	.batres_tbl = temp_to_batres_tbl_thermistor,
-},
+	},
+	{
+		.name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+		.resis_high = 200000,
+		.resis_low = 82869,
+		.battery_resistance = 300,
+		.charge_full_design = 900,
+		.nominal_voltage = 3600,
+		.termination_vol = 4150,
+		.termination_curr = 80,
+		.recharge_cap = 95,
+		.normal_cur_lvl = 700,
+		.normal_vol_lvl = 4200,
+		.maint_a_cur_lvl = 600,
+		.maint_a_vol_lvl = 4150,
+		.maint_a_chg_timer_h = 60,
+		.maint_b_cur_lvl = 600,
+		.maint_b_vol_lvl = 4100,
+		.maint_b_chg_timer_h = 200,
+		.low_high_cur_lvl = 300,
+		.low_high_vol_lvl = 4000,
+		.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_B_thermistor),
+		.r_to_t_tbl = temp_tbl_B_thermistor,
+		.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_B_thermistor),
+		.v_to_cap_tbl = cap_tbl_B_thermistor,
+		.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+		.batres_tbl = temp_to_batres_tbl_thermistor,
+	},
 };
 
 static struct abx500_battery_type bat_type_ext_thermistor[] = {
-[BATTERY_UNKNOWN] = {
-	/* First element always represent the UNKNOWN battery */
-	.name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
-	.resis_high = 0,
-	.resis_low = 0,
-	.battery_resistance = 300,
-	.charge_full_design = 612,
-	.nominal_voltage = 3700,
-	.termination_vol = 4050,
-	.termination_curr = 200,
-	.recharge_vol = 3990,
-	.normal_cur_lvl = 400,
-	.normal_vol_lvl = 4100,
-	.maint_a_cur_lvl = 400,
-	.maint_a_vol_lvl = 4050,
-	.maint_a_chg_timer_h = 60,
-	.maint_b_cur_lvl = 400,
-	.maint_b_vol_lvl = 4000,
-	.maint_b_chg_timer_h = 200,
-	.low_high_cur_lvl = 300,
-	.low_high_vol_lvl = 4000,
-	.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
-	.r_to_t_tbl = temp_tbl,
-	.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
-	.v_to_cap_tbl = cap_tbl,
-	.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
-	.batres_tbl = temp_to_batres_tbl_thermistor,
-},
+	[BATTERY_UNKNOWN] = {
+		/* First element always represent the UNKNOWN battery */
+		.name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
+		.resis_high = 0,
+		.resis_low = 0,
+		.battery_resistance = 300,
+		.charge_full_design = 612,
+		.nominal_voltage = 3700,
+		.termination_vol = 4050,
+		.termination_curr = 200,
+		.recharge_cap = 95,
+		.normal_cur_lvl = 400,
+		.normal_vol_lvl = 4100,
+		.maint_a_cur_lvl = 400,
+		.maint_a_vol_lvl = 4050,
+		.maint_a_chg_timer_h = 60,
+		.maint_b_cur_lvl = 400,
+		.maint_b_vol_lvl = 4000,
+		.maint_b_chg_timer_h = 200,
+		.low_high_cur_lvl = 300,
+		.low_high_vol_lvl = 4000,
+		.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+		.r_to_t_tbl = temp_tbl,
+		.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+		.v_to_cap_tbl = cap_tbl,
+		.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+		.batres_tbl = temp_to_batres_tbl_thermistor,
+	},
 /*
  * These are the batteries that doesn't have an internal NTC resistor to measure
  * its temperature. The temperature in this case is measure with a NTC placed
  * near the battery but on the PCB.
  */
-{
-	.name = POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.resis_high = 76000,
-	.resis_low = 53000,
-	.battery_resistance = 300,
-	.charge_full_design = 900,
-	.nominal_voltage = 3700,
-	.termination_vol = 4150,
-	.termination_curr = 100,
-	.recharge_vol = 4130,
-	.normal_cur_lvl = 700,
-	.normal_vol_lvl = 4200,
-	.maint_a_cur_lvl = 600,
-	.maint_a_vol_lvl = 4150,
-	.maint_a_chg_timer_h = 60,
-	.maint_b_cur_lvl = 600,
-	.maint_b_vol_lvl = 4100,
-	.maint_b_chg_timer_h = 200,
-	.low_high_cur_lvl = 300,
-	.low_high_vol_lvl = 4000,
-	.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
-	.r_to_t_tbl = temp_tbl,
-	.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
-	.v_to_cap_tbl = cap_tbl,
-	.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
-	.batres_tbl = temp_to_batres_tbl_thermistor,
-},
-{
-	.name = POWER_SUPPLY_TECHNOLOGY_LION,
-	.resis_high = 30000,
-	.resis_low = 10000,
-	.battery_resistance = 300,
-	.charge_full_design = 950,
-	.nominal_voltage = 3700,
-	.termination_vol = 4150,
-	.termination_curr = 100,
-	.recharge_vol = 4130,
-	.normal_cur_lvl = 700,
-	.normal_vol_lvl = 4200,
-	.maint_a_cur_lvl = 600,
-	.maint_a_vol_lvl = 4150,
-	.maint_a_chg_timer_h = 60,
-	.maint_b_cur_lvl = 600,
-	.maint_b_vol_lvl = 4100,
-	.maint_b_chg_timer_h = 200,
-	.low_high_cur_lvl = 300,
-	.low_high_vol_lvl = 4000,
-	.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
-	.r_to_t_tbl = temp_tbl,
-	.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
-	.v_to_cap_tbl = cap_tbl,
-	.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
-	.batres_tbl = temp_to_batres_tbl_thermistor,
-},
-{
-	.name = POWER_SUPPLY_TECHNOLOGY_LION,
-	.resis_high = 95000,
-	.resis_low = 76001,
-	.battery_resistance = 300,
-	.charge_full_design = 950,
-	.nominal_voltage = 3700,
-	.termination_vol = 4150,
-	.termination_curr = 100,
-	.recharge_vol = 4130,
-	.normal_cur_lvl = 700,
-	.normal_vol_lvl = 4200,
-	.maint_a_cur_lvl = 600,
-	.maint_a_vol_lvl = 4150,
-	.maint_a_chg_timer_h = 60,
-	.maint_b_cur_lvl = 600,
-	.maint_b_vol_lvl = 4100,
-	.maint_b_chg_timer_h = 200,
-	.low_high_cur_lvl = 300,
-	.low_high_vol_lvl = 4000,
-	.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
-	.r_to_t_tbl = temp_tbl,
-	.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
-	.v_to_cap_tbl = cap_tbl,
-	.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
-	.batres_tbl = temp_to_batres_tbl_thermistor,
-},
+	{
+		.name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+		.resis_high = 76000,
+		.resis_low = 53000,
+		.battery_resistance = 300,
+		.charge_full_design = 900,
+		.nominal_voltage = 3700,
+		.termination_vol = 4150,
+		.termination_curr = 100,
+		.recharge_cap = 95,
+		.normal_cur_lvl = 700,
+		.normal_vol_lvl = 4200,
+		.maint_a_cur_lvl = 600,
+		.maint_a_vol_lvl = 4150,
+		.maint_a_chg_timer_h = 60,
+		.maint_b_cur_lvl = 600,
+		.maint_b_vol_lvl = 4100,
+		.maint_b_chg_timer_h = 200,
+		.low_high_cur_lvl = 300,
+		.low_high_vol_lvl = 4000,
+		.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+		.r_to_t_tbl = temp_tbl,
+		.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+		.v_to_cap_tbl = cap_tbl,
+		.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+		.batres_tbl = temp_to_batres_tbl_thermistor,
+	},
+	{
+		.name = POWER_SUPPLY_TECHNOLOGY_LION,
+		.resis_high = 30000,
+		.resis_low = 10000,
+		.battery_resistance = 300,
+		.charge_full_design = 950,
+		.nominal_voltage = 3700,
+		.termination_vol = 4150,
+		.termination_curr = 100,
+		.recharge_cap = 95,
+		.normal_cur_lvl = 700,
+		.normal_vol_lvl = 4200,
+		.maint_a_cur_lvl = 600,
+		.maint_a_vol_lvl = 4150,
+		.maint_a_chg_timer_h = 60,
+		.maint_b_cur_lvl = 600,
+		.maint_b_vol_lvl = 4100,
+		.maint_b_chg_timer_h = 200,
+		.low_high_cur_lvl = 300,
+		.low_high_vol_lvl = 4000,
+		.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+		.r_to_t_tbl = temp_tbl,
+		.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+		.v_to_cap_tbl = cap_tbl,
+		.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+		.batres_tbl = temp_to_batres_tbl_thermistor,
+	},
+	{
+		.name = POWER_SUPPLY_TECHNOLOGY_LION,
+		.resis_high = 95000,
+		.resis_low = 76001,
+		.battery_resistance = 300,
+		.charge_full_design = 950,
+		.nominal_voltage = 3700,
+		.termination_vol = 4150,
+		.termination_curr = 100,
+		.recharge_cap = 95,
+		.normal_cur_lvl = 700,
+		.normal_vol_lvl = 4200,
+		.maint_a_cur_lvl = 600,
+		.maint_a_vol_lvl = 4150,
+		.maint_a_chg_timer_h = 60,
+		.maint_b_cur_lvl = 600,
+		.maint_b_vol_lvl = 4100,
+		.maint_b_chg_timer_h = 200,
+		.low_high_cur_lvl = 300,
+		.low_high_vol_lvl = 4000,
+		.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+		.r_to_t_tbl = temp_tbl,
+		.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+		.v_to_cap_tbl = cap_tbl,
+		.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+		.batres_tbl = temp_to_batres_tbl_thermistor,
+	},
 };
 
 static const struct abx500_bm_capacity_levels cap_levels = {
@@ -405,8 +405,8 @@ static const struct abx500_fg_parameters fg = {
 	.lowbat_threshold = 3100,
 	.battok_falling_th_sel0 = 2860,
 	.battok_raising_th_sel1 = 2860,
+	.maint_thres = 95,
 	.user_cap_limit = 15,
-	.maint_thres = 97,
 };
 
 static const struct abx500_maxim_parameters maxi_params = {
@@ -424,96 +424,84 @@ static const struct abx500_bm_charger_parameters chg = {
 };
 
 struct abx500_bm_data ab8500_bm_data = {
-	.temp_under		= 3,
-	.temp_low		= 8,
-	.temp_high		= 43,
-	.temp_over		= 48,
-	.main_safety_tmr_h	= 4,
-	.temp_interval_chg	= 20,
-	.temp_interval_nochg	= 120,
-	.usb_safety_tmr_h	= 4,
-	.bkup_bat_v		= BUP_VCH_SEL_2P6V,
-	.bkup_bat_i		= BUP_ICH_SEL_150UA,
-	.no_maintenance		= false,
-	.adc_therm		= ABx500_ADC_THERM_BATCTRL,
-	.chg_unknown_bat	= false,
-	.enable_overshoot	= false,
-	.fg_res			= 100,
-	.cap_levels		= &cap_levels,
-	.bat_type		= bat_type_thermistor,
-	.n_btypes		= 3,
-	.batt_id		= 0,
-	.interval_charging	= 5,
-	.interval_not_charging	= 120,
-	.temp_hysteresis	= 3,
-	.gnd_lift_resistance	= 34,
-	.maxi			= &maxi_params,
-	.chg_params		= &chg,
-	.fg_params		= &fg,
+	.temp_under             = 3,
+	.temp_low               = 8,
+	.temp_high              = 43,
+	.temp_over              = 48,
+	.main_safety_tmr_h      = 4,
+	.temp_interval_chg      = 20,
+	.temp_interval_nochg    = 120,
+	.usb_safety_tmr_h       = 4,
+	.bkup_bat_v             = BUP_VCH_SEL_2P6V,
+	.bkup_bat_i             = BUP_ICH_SEL_150UA,
+	.no_maintenance         = false,
+	.capacity_scaling       = false,
+	.adc_therm              = ABx500_ADC_THERM_BATCTRL,
+	.chg_unknown_bat        = false,
+	.enable_overshoot       = false,
+	.fg_res                 = 100,
+	.cap_levels             = &cap_levels,
+	.bat_type               = bat_type_thermistor,
+	.n_btypes               = 3,
+	.batt_id                = 0,
+	.interval_charging      = 5,
+	.interval_not_charging  = 120,
+	.temp_hysteresis        = 3,
+	.gnd_lift_resistance    = 34,
+	.maxi                   = &maxi_params,
+	.chg_params             = &chg,
+	.fg_params              = &fg,
 };
 
-int bmdevs_of_probe(struct device *dev, struct device_node *np,
-		    struct abx500_bm_data **battery)
+int ab8500_bm_of_probe(struct device *dev,
+		       struct device_node *np,
+		       struct abx500_bm_data *bm)
 {
-	struct	abx500_battery_type *btype;
-	struct  device_node *np_bat_supply;
-	struct	abx500_bm_data *bat;
+	struct batres_vs_temp *tmp_batres_tbl;
+	struct device_node *battery_node;
 	const char *btech;
-	char bat_tech[8];
-	int i, thermistor;
-
-	*battery = &ab8500_bm_data;
+	int i;
 
 	/* get phandle to 'battery-info' node */
-	np_bat_supply = of_parse_phandle(np, "battery", 0);
-	if (!np_bat_supply) {
-		dev_err(dev, "missing property battery\n");
+	battery_node = of_parse_phandle(np, "battery", 0);
+	if (!battery_node) {
+		dev_err(dev, "battery node or reference missing\n");
 		return -EINVAL;
 	}
-	if (of_property_read_bool(np_bat_supply,
-			"thermistor-on-batctrl"))
-		thermistor = NTC_INTERNAL;
-	else
-		thermistor = NTC_EXTERNAL;
 
-	bat = *battery;
-	if (thermistor == NTC_EXTERNAL) {
-		bat->n_btypes  = 4;
-		bat->bat_type  = bat_type_ext_thermistor;
-		bat->adc_therm = ABx500_ADC_THERM_BATTEMP;
-	}
-	btech = of_get_property(np_bat_supply,
-		"stericsson,battery-type", NULL);
+	btech = of_get_property(battery_node, "stericsson,battery-type", NULL);
 	if (!btech) {
 		dev_warn(dev, "missing property battery-name/type\n");
-		strcpy(bat_tech, "UNKNOWN");
-	} else {
-		strcpy(bat_tech, btech);
+		return -EINVAL;
 	}
 
-	if (strncmp(bat_tech, "LION", 4) == 0) {
-		bat->no_maintenance  = true;
-		bat->chg_unknown_bat = true;
-		bat->bat_type[BATTERY_UNKNOWN].charge_full_design = 2600;
-		bat->bat_type[BATTERY_UNKNOWN].termination_vol    = 4150;
-		bat->bat_type[BATTERY_UNKNOWN].recharge_vol	  = 4130;
-		bat->bat_type[BATTERY_UNKNOWN].normal_cur_lvl	  = 520;
-		bat->bat_type[BATTERY_UNKNOWN].normal_vol_lvl	  = 4200;
+	if (strncmp(btech, "LION", 4) == 0) {
+		bm->no_maintenance  = true;
+		bm->chg_unknown_bat = true;
+		bm->bat_type[BATTERY_UNKNOWN].charge_full_design = 2600;
+		bm->bat_type[BATTERY_UNKNOWN].termination_vol    = 4150;
+		bm->bat_type[BATTERY_UNKNOWN].recharge_cap       = 95;
+		bm->bat_type[BATTERY_UNKNOWN].normal_cur_lvl     = 520;
+		bm->bat_type[BATTERY_UNKNOWN].normal_vol_lvl     = 4200;
 	}
-	/* select the battery resolution table */
-	for (i = 0; i < bat->n_btypes; ++i) {
-		btype = (bat->bat_type + i);
-		if (thermistor == NTC_EXTERNAL) {
-			btype->batres_tbl =
-				temp_to_batres_tbl_ext_thermistor;
-		} else if (strncmp(bat_tech, "LION", 4) == 0) {
-			btype->batres_tbl =
-				temp_to_batres_tbl_9100;
-		} else {
-			btype->batres_tbl =
-				temp_to_batres_tbl_thermistor;
-		}
+
+	if (of_property_read_bool(battery_node, "thermistor-on-batctrl")) {
+		if (strncmp(btech, "LION", 4) == 0)
+			tmp_batres_tbl = temp_to_batres_tbl_9100;
+		else
+			tmp_batres_tbl = temp_to_batres_tbl_thermistor;
+	} else {
+		bm->n_btypes   = 4;
+		bm->bat_type   = bat_type_ext_thermistor;
+		bm->adc_therm  = ABx500_ADC_THERM_BATTEMP;
+		tmp_batres_tbl = temp_to_batres_tbl_ext_thermistor;
 	}
-	of_node_put(np_bat_supply);
+
+	/* select the battery resolution table */
+	for (i = 0; i < bm->n_btypes; ++i)
+		bm->bat_type[i].batres_tbl = tmp_batres_tbl;
+
+	of_node_put(battery_node);
+
 	return 0;
 }
diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c
index 20e2a7d3ef4..07689064996 100644
--- a/drivers/power/ab8500_btemp.c
+++ b/drivers/power/ab8500_btemp.c
@@ -39,6 +39,9 @@
 #define BTEMP_BATCTRL_CURR_SRC_7UA	7
 #define BTEMP_BATCTRL_CURR_SRC_20UA	20
 
+#define BTEMP_BATCTRL_CURR_SRC_16UA	16
+#define BTEMP_BATCTRL_CURR_SRC_18UA	18
+
 #define to_ab8500_btemp_device_info(x) container_of((x), \
 	struct ab8500_btemp, btemp_psy);
 
@@ -78,12 +81,13 @@ struct ab8500_btemp_ranges {
  * @parent:		Pointer to the struct ab8500
  * @gpadc:		Pointer to the struct gpadc
  * @fg:			Pointer to the struct fg
- * @bat:		Pointer to the abx500_bm platform data
+ * @bm:           	Platform specific battery management information
  * @btemp_psy:		Structure for BTEMP specific battery properties
  * @events:		Structure for information about events triggered
  * @btemp_ranges:	Battery temperature range structure
  * @btemp_wq:		Work queue for measuring the temperature periodically
  * @btemp_periodic_work:	Work for measuring the temperature periodically
+ * @initialized:	True if battery id read.
  */
 struct ab8500_btemp {
 	struct device *dev;
@@ -94,12 +98,13 @@ struct ab8500_btemp {
 	struct ab8500 *parent;
 	struct ab8500_gpadc *gpadc;
 	struct ab8500_fg *fg;
-	struct abx500_bm_data *bat;
+	struct abx500_bm_data *bm;
 	struct power_supply btemp_psy;
 	struct ab8500_btemp_events events;
 	struct ab8500_btemp_ranges btemp_ranges;
 	struct workqueue_struct *btemp_wq;
 	struct delayed_work btemp_periodic_work;
+	bool initialized;
 };
 
 /* BTEMP power supply properties */
@@ -147,13 +152,13 @@ static int ab8500_btemp_batctrl_volt_to_res(struct ab8500_btemp *di,
 		return (450000 * (v_batctrl)) / (1800 - v_batctrl);
 	}
 
-	if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL) {
+	if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL) {
 		/*
 		 * If the battery has internal NTC, we use the current
 		 * source to calculate the resistance, 7uA or 20uA
 		 */
 		rbs = (v_batctrl * 1000
-		       - di->bat->gnd_lift_resistance * inst_curr)
+		       - di->bm->gnd_lift_resistance * inst_curr)
 		      / di->curr_source;
 	} else {
 		/*
@@ -209,11 +214,19 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di,
 		return 0;
 
 	/* Only do this for batteries with internal NTC */
-	if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) {
-		if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_7UA)
-			curr = BAT_CTRL_7U_ENA;
-		else
-			curr = BAT_CTRL_20U_ENA;
+	if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) {
+
+		if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+			if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_16UA)
+				curr = BAT_CTRL_16U_ENA;
+			else
+				curr = BAT_CTRL_18U_ENA;
+		} else {
+			if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_7UA)
+				curr = BAT_CTRL_7U_ENA;
+			else
+				curr = BAT_CTRL_20U_ENA;
+		}
 
 		dev_dbg(di->dev, "Set BATCTRL %duA\n", di->curr_source);
 
@@ -241,14 +254,25 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di,
 				__func__);
 			goto disable_curr_source;
 		}
-	} else if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) {
+	} else if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) {
 		dev_dbg(di->dev, "Disable BATCTRL curr source\n");
 
-		/* Write 0 to the curr bits */
-		ret = abx500_mask_and_set_register_interruptible(di->dev,
-			AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
-			BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA,
-			~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA));
+		if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+			/* Write 0 to the curr bits */
+			ret = abx500_mask_and_set_register_interruptible(
+				di->dev,
+				AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+				BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA,
+				~(BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA));
+		} else {
+			/* Write 0 to the curr bits */
+			ret = abx500_mask_and_set_register_interruptible(
+				di->dev,
+				AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+				BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA,
+				~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA));
+		}
+
 		if (ret) {
 			dev_err(di->dev, "%s failed disabling current source\n",
 				__func__);
@@ -290,11 +314,20 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di,
 	 * if we got an error above
 	 */
 disable_curr_source:
-	/* Write 0 to the curr bits */
-	ret = abx500_mask_and_set_register_interruptible(di->dev,
+	if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+		/* Write 0 to the curr bits */
+		ret = abx500_mask_and_set_register_interruptible(di->dev,
+			AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+			BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA,
+			~(BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA));
+	} else {
+		/* Write 0 to the curr bits */