Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (43 commits)
  acer-wmi: support integer return type from WMI methods
  msi-laptop: fix section mismatch in reference from the function load_scm_model_init
  acer-wmi: support to set communication device state by new wmid method
  acer-wmi: allow 64-bits return buffer from WMI methods
  acer-wmi: check the existence of internal 3G device when set capability
  platform/x86:delete two unused variables
  support wlan hotkey on Acer Travelmate 5735Z
  platform-x86: intel_mid_thermal: Fix memory leak
  platform/x86: Fix Makefile for intel_mid_powerbtn
  platform/x86: Simplify intel_mid_powerbtn
  acer-wmi: Delete out-of-date documentation
  acerhdf: Clean up includes
  acerhdf: Drop pointless dependency on THERMAL_HWMON
  acer-wmi: Update MAINTAINERS
  wmi: Orphan ACPI-WMI driver
  tc1100-wmi: Orphan driver
  acer-wmi: does not allow negative number set to initial device state
  platform/oaktrail: ACPI EC Extra driver for Oaktrail
  thinkpad_acpi: Convert printks to pr_<level>
  thinkpad_acpi: Correct !CONFIG_THINKPAD_ACPI_VIDEO warning
  ...

33 files changed, 1390 insertions, 1000 deletions

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 5cb999b50f9..45e0191c35d 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -39,7 +39,7 @@ config ACER_WMI
 
 config ACERHDF
 	tristate "Acer Aspire One temperature and fan driver"
-	depends on THERMAL && THERMAL_HWMON && ACPI
+	depends on THERMAL && ACPI
 	---help---
 	  This is a driver for Acer Aspire One netbooks. It allows to access
 	  the temperature sensor and to control the fan.
@@ -760,4 +760,13 @@ config MXM_WMI
           MXM is a standard for laptop graphics cards, the WMI interface
 	  is required for switchable nvidia graphics machines
 
+config INTEL_OAKTRAIL
+	tristate "Intel Oaktrail Platform Extras"
+	depends on ACPI
+	depends on RFKILL && BACKLIGHT_CLASS_DEVICE && ACPI
+	---help---
+	  Intel Oaktrail platform need this driver to provide interfaces to
+	  enable/disable the Camera, WiFi, BT etc. devices. If in doubt, say Y
+	  here; it will only load on supported platforms.
+
 endif # X86_PLATFORM_DEVICES
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index a7ab3bc7b3a..afc1f832aa6 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -41,5 +41,6 @@ obj-$(CONFIG_XO1_RFKILL)	+= xo1-rfkill.o
 obj-$(CONFIG_XO15_EBOOK)	+= xo15-ebook.o
 obj-$(CONFIG_IBM_RTL)		+= ibm_rtl.o
 obj-$(CONFIG_SAMSUNG_LAPTOP)	+= samsung-laptop.o
-obj-$(CONFIG_INTEL_MFLD_THERMAL)	+= intel_mid_thermal.o
 obj-$(CONFIG_MXM_WMI)		+= mxm-wmi.o
+obj-$(CONFIG_INTEL_MID_POWER_BUTTON)	+= intel_mid_powerbtn.o
+obj-$(CONFIG_INTEL_OAKTRAIL)	+= intel_oaktrail.o
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index ac4e7f83ce6..005417bd429 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -98,13 +98,26 @@ enum acer_wmi_event_ids {
 
 static const struct key_entry acer_wmi_keymap[] = {
 	{KE_KEY, 0x01, {KEY_WLAN} },     /* WiFi */
+	{KE_KEY, 0x03, {KEY_WLAN} },     /* WiFi */
 	{KE_KEY, 0x12, {KEY_BLUETOOTH} },	/* BT */
 	{KE_KEY, 0x21, {KEY_PROG1} },    /* Backup */
 	{KE_KEY, 0x22, {KEY_PROG2} },    /* Arcade */
 	{KE_KEY, 0x23, {KEY_PROG3} },    /* P_Key */
 	{KE_KEY, 0x24, {KEY_PROG4} },    /* Social networking_Key */
+	{KE_IGNORE, 0x41, {KEY_MUTE} },
+	{KE_IGNORE, 0x42, {KEY_PREVIOUSSONG} },
+	{KE_IGNORE, 0x43, {KEY_NEXTSONG} },
+	{KE_IGNORE, 0x44, {KEY_PLAYPAUSE} },
+	{KE_IGNORE, 0x45, {KEY_STOP} },
+	{KE_IGNORE, 0x48, {KEY_VOLUMEUP} },
+	{KE_IGNORE, 0x49, {KEY_VOLUMEDOWN} },
+	{KE_IGNORE, 0x61, {KEY_SWITCHVIDEOMODE} },
+	{KE_IGNORE, 0x62, {KEY_BRIGHTNESSUP} },
+	{KE_IGNORE, 0x63, {KEY_BRIGHTNESSDOWN} },
 	{KE_KEY, 0x64, {KEY_SWITCHVIDEOMODE} },	/* Display Switch */
+	{KE_IGNORE, 0x81, {KEY_SLEEP} },
 	{KE_KEY, 0x82, {KEY_TOUCHPAD_TOGGLE} },	/* Touch Pad On/Off */
+	{KE_IGNORE, 0x83, {KEY_TOUCHPAD_TOGGLE} },
 	{KE_END, 0}
 };
 
@@ -122,6 +135,7 @@ struct event_return_value {
  */
 #define ACER_WMID3_GDS_WIRELESS		(1<<0)	/* WiFi */
 #define ACER_WMID3_GDS_THREEG		(1<<6)	/* 3G */
+#define ACER_WMID3_GDS_WIMAX		(1<<7)	/* WiMAX */
 #define ACER_WMID3_GDS_BLUETOOTH	(1<<11)	/* BT */
 
 struct lm_input_params {
@@ -737,8 +751,11 @@ WMI_execute_u32(u32 method_id, u32 in, u32 *out)
 
 	obj = (union acpi_object *) result.pointer;
 	if (obj && obj->type == ACPI_TYPE_BUFFER &&
-		obj->buffer.length == sizeof(u32)) {
+		(obj->buffer.length == sizeof(u32) ||
+		obj->buffer.length == sizeof(u64))) {
 		tmp = *((u32 *) obj->buffer.pointer);
+	} else if (obj->type == ACPI_TYPE_INTEGER) {
+		tmp = (u32) obj->integer.value;
 	} else {
 		tmp = 0;
 	}
@@ -866,8 +883,11 @@ static acpi_status WMID_set_capabilities(void)
 
 	obj = (union acpi_object *) out.pointer;
 	if (obj && obj->type == ACPI_TYPE_BUFFER &&
-		obj->buffer.length == sizeof(u32)) {
+		(obj->buffer.length == sizeof(u32) ||
+		obj->buffer.length == sizeof(u64))) {
 		devices = *((u32 *) obj->buffer.pointer);
+	} else if (obj->type == ACPI_TYPE_INTEGER) {
+		devices = (u32) obj->integer.value;
 	} else {
 		kfree(out.pointer);
 		return AE_ERROR;
@@ -876,7 +896,8 @@ static acpi_status WMID_set_capabilities(void)
 	dmi_walk(type_aa_dmi_decode, NULL);
 	if (!has_type_aa) {
 		interface->capability |= ACER_CAP_WIRELESS;
-		interface->capability |= ACER_CAP_THREEG;
+		if (devices & 0x40)
+			interface->capability |= ACER_CAP_THREEG;
 		if (devices & 0x10)
 			interface->capability |= ACER_CAP_BLUETOOTH;
 	}
@@ -961,10 +982,12 @@ static void __init acer_commandline_init(void)
 	 * These will all fail silently if the value given is invalid, or the
 	 * capability isn't available on the given interface
 	 */
-	set_u32(mailled, ACER_CAP_MAILLED);
-	if (!has_type_aa)
+	if (mailled >= 0)
+		set_u32(mailled, ACER_CAP_MAILLED);
+	if (!has_type_aa && threeg >= 0)
 		set_u32(threeg, ACER_CAP_THREEG);
-	set_u32(brightness, ACER_CAP_BRIGHTNESS);
+	if (brightness >= 0)
+		set_u32(brightness, ACER_CAP_BRIGHTNESS);
 }
 
 /*
@@ -1081,7 +1104,7 @@ static acpi_status wmid3_get_device_status(u32 *value, u16 device)
 		return AE_ERROR;
 	}
 	if (obj->buffer.length != 8) {
-		pr_warning("Unknown buffer length %d\n", obj->buffer.length);
+		pr_warn("Unknown buffer length %d\n", obj->buffer.length);
 		kfree(obj);
 		return AE_ERROR;
 	}
@@ -1090,8 +1113,8 @@ static acpi_status wmid3_get_device_status(u32 *value, u16 device)
 	kfree(obj);
 
 	if (return_value.error_code || return_value.ec_return_value)
-		pr_warning("Get Device Status failed: "
-			"0x%x - 0x%x\n", return_value.error_code,
+		pr_warn("Get Device Status failed: 0x%x - 0x%x\n",
+			return_value.error_code,
 			return_value.ec_return_value);
 	else
 		*value = !!(return_value.devices & device);
@@ -1124,6 +1147,114 @@ static acpi_status get_device_status(u32 *value, u32 cap)
 	}
 }
 
+static acpi_status wmid3_set_device_status(u32 value, u16 device)
+{
+	struct wmid3_gds_return_value return_value;
+	acpi_status status;
+	union acpi_object *obj;
+	u16 devices;
+	struct wmid3_gds_input_param params = {
+		.function_num = 0x1,
+		.hotkey_number = 0x01,
+		.devices = ACER_WMID3_GDS_WIRELESS &
+				ACER_WMID3_GDS_THREEG &
+				ACER_WMID3_GDS_WIMAX &
+				ACER_WMID3_GDS_BLUETOOTH,
+	};
+	struct acpi_buffer input = {
+		sizeof(struct wmid3_gds_input_param),
+		&params
+	};
+	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+	struct acpi_buffer output2 = { ACPI_ALLOCATE_BUFFER, NULL };
+
+	status = wmi_evaluate_method(WMID_GUID3, 0, 0x2, &input, &output);
+	if (ACPI_FAILURE(status))
+		return status;
+
+	obj = output.pointer;
+
+	if (!obj)
+		return AE_ERROR;
+	else if (obj->type != ACPI_TYPE_BUFFER) {
+		kfree(obj);
+		return AE_ERROR;
+	}
+	if (obj->buffer.length != 8) {
+		pr_warning("Unknown buffer length %d\n", obj->buffer.length);
+		kfree(obj);
+		return AE_ERROR;
+	}
+
+	return_value = *((struct wmid3_gds_return_value *)obj->buffer.pointer);
+	kfree(obj);
+
+	if (return_value.error_code || return_value.ec_return_value) {
+		pr_warning("Get Current Device Status failed: "
+			"0x%x - 0x%x\n", return_value.error_code,
+			return_value.ec_return_value);
+		return status;
+	}
+
+	devices = return_value.devices;
+	params.function_num = 0x2;
+	params.hotkey_number = 0x01;
+	params.devices = (value) ? (devices | device) : (devices & ~device);
+
+	status = wmi_evaluate_method(WMID_GUID3, 0, 0x1, &input, &output2);
+	if (ACPI_FAILURE(status))
+		return status;
+
+	obj = output2.pointer;
+
+	if (!obj)
+		return AE_ERROR;
+	else if (obj->type != ACPI_TYPE_BUFFER) {
+		kfree(obj);
+		return AE_ERROR;
+	}
+	if (obj->buffer.length != 4) {
+		pr_warning("Unknown buffer length %d\n", obj->buffer.length);
+		kfree(obj);
+		return AE_ERROR;
+	}
+
+	return_value = *((struct wmid3_gds_return_value *)obj->buffer.pointer);
+	kfree(obj);
+
+	if (return_value.error_code || return_value.ec_return_value)
+		pr_warning("Set Device Status failed: "
+			"0x%x - 0x%x\n", return_value.error_code,
+			return_value.ec_return_value);
+
+	return status;
+}
+
+static acpi_status set_device_status(u32 value, u32 cap)
+{
+	if (wmi_has_guid(WMID_GUID3)) {
+		u16 device;
+
+		switch (cap) {
+		case ACER_CAP_WIRELESS:
+			device = ACER_WMID3_GDS_WIRELESS;
+			break;
+		case ACER_CAP_BLUETOOTH:
+			device = ACER_WMID3_GDS_BLUETOOTH;
+			break;
+		case ACER_CAP_THREEG:
+			device = ACER_WMID3_GDS_THREEG;
+			break;
+		default:
+			return AE_ERROR;
+		}
+		return wmid3_set_device_status(value, device);
+
+	} else {
+		return set_u32(value, cap);
+	}
+}
+
 /*
  * Rfkill devices
  */
@@ -1160,7 +1291,7 @@ static int acer_rfkill_set(void *data, bool blocked)
 	u32 cap = (unsigned long)data;
 
 	if (rfkill_inited) {
-		status = set_u32(!blocked, cap);
+		status = set_device_status(!blocked, cap);
 		if (ACPI_FAILURE(status))
 			return -ENODEV;
 	}
@@ -1317,7 +1448,7 @@ static void acer_wmi_notify(u32 value, void *context)
 
 	status = wmi_get_event_data(value, &response);
 	if (status != AE_OK) {
-		pr_warning("bad event status 0x%x\n", status);
+		pr_warn("bad event status 0x%x\n", status);
 		return;
 	}
 
@@ -1326,12 +1457,12 @@ static void acer_wmi_notify(u32 value, void *context)
 	if (!obj)
 		return;
 	if (obj->type != ACPI_TYPE_BUFFER) {
-		pr_warning("Unknown response received %d\n", obj->type);
+		pr_warn("Unknown response received %d\n", obj->type);
 		kfree(obj);
 		return;
 	}
 	if (obj->buffer.length != 8) {
-		pr_warning("Unknown buffer length %d\n", obj->buffer.length);
+		pr_warn("Unknown buffer length %d\n", obj->buffer.length);
 		kfree(obj);
 		return;
 	}
@@ -1343,7 +1474,7 @@ static void acer_wmi_notify(u32 value, void *context)
 	case WMID_HOTKEY_EVENT:
 		if (return_value.device_state) {
 			u16 device_state = return_value.device_state;
-			pr_debug("deivces states: 0x%x\n", device_state);
+			pr_debug("device state: 0x%x\n", device_state);
 			if (has_cap(ACER_CAP_WIRELESS))
 				rfkill_set_sw_state(wireless_rfkill,
 				!(device_state & ACER_WMID3_GDS_WIRELESS));
@@ -1356,11 +1487,11 @@ static void acer_wmi_notify(u32 value, void *context)
 		}
 		if (!sparse_keymap_report_event(acer_wmi_input_dev,
 				return_value.key_num, 1, true))
-			pr_warning("Unknown key number - 0x%x\n",
+			pr_warn("Unknown key number - 0x%x\n",
 				return_value.key_num);
 		break;
 	default:
-		pr_warning("Unknown function number - %d - %d\n",
+		pr_warn("Unknown function number - %d - %d\n",
 			return_value.function, return_value.key_num);
 		break;
 	}
@@ -1389,7 +1520,7 @@ wmid3_set_lm_mode(struct lm_input_params *params,
 		return AE_ERROR;
 	}
 	if (obj->buffer.length != 4) {
-		pr_warning("Unknown buffer length %d\n", obj->buffer.length);
+		pr_warn("Unknown buffer length %d\n", obj->buffer.length);
 		kfree(obj);
 		return AE_ERROR;
 	}
@@ -1414,11 +1545,11 @@ static int acer_wmi_enable_ec_raw(void)
 	status = wmid3_set_lm_mode(&params, &return_value);
 
 	if (return_value.error_code || return_value.ec_return_value)
-		pr_warning("Enabling EC raw mode failed: "
-		       "0x%x - 0x%x\n", return_value.error_code,
-		       return_value.ec_return_value);
+		pr_warn("Enabling EC raw mode failed: 0x%x - 0x%x\n",
+			return_value.error_code,
+			return_value.ec_return_value);
 	else
-		pr_info("Enabled EC raw mode");
+		pr_info("Enabled EC raw mode\n");
 
 	return status;
 }
@@ -1437,9 +1568,9 @@ static int acer_wmi_enable_lm(void)
 	status = wmid3_set_lm_mode(&params, &return_value);
 
 	if (return_value.error_code || return_value.ec_return_value)
-		pr_warning("Enabling Launch Manager failed: "
-		       "0x%x - 0x%x\n", return_value.error_code,
-		       return_value.ec_return_value);
+		pr_warn("Enabling Launch Manager failed: 0x%x - 0x%x\n",
+			return_value.error_code,
+			return_value.ec_return_value);
 
 	return status;
 }
@@ -1506,8 +1637,11 @@ static u32 get_wmid_devices(void)
 
 	obj = (union acpi_object *) out.pointer;
 	if (obj && obj->type == ACPI_TYPE_BUFFER &&
-		obj->buffer.length == sizeof(u32)) {
+		(obj->buffer.length == sizeof(u32) ||
+		obj->buffer.length == sizeof(u64))) {
 		devices = *((u32 *) obj->buffer.pointer);
+	} else if (obj->type == ACPI_TYPE_INTEGER) {
+		devices = (u32) obj->integer.value;
 	}
 
 	kfree(out.pointer);
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index 60f9cfcac93..fca3489218b 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -35,10 +35,8 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/fs.h>
 #include <linux/dmi.h>
-#include <acpi/acpi_drivers.h>
-#include <linux/sched.h>
+#include <linux/acpi.h>
 #include <linux/thermal.h>
 #include <linux/platform_device.h>
 
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index c53b3ff7978..d65df92e2ac 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -318,7 +318,7 @@ static int acpi_check_handle(acpi_handle handle, const char *method,
 
 	if (status != AE_OK) {
 		if (ret)
-			pr_warning("Error finding %s\n", method);
+			pr_warn("Error finding %s\n", method);
 		return -ENODEV;
 	}
 	return 0;
@@ -383,7 +383,7 @@ static int asus_kled_lvl(struct asus_laptop *asus)
 	rv = acpi_evaluate_integer(asus->handle, METHOD_KBD_LIGHT_GET,
 				   &params, &kblv);
 	if (ACPI_FAILURE(rv)) {
-		pr_warning("Error reading kled level\n");
+		pr_warn("Error reading kled level\n");
 		return -ENODEV;
 	}
 	return kblv;
@@ -397,7 +397,7 @@ static int asus_kled_set(struct asus_laptop *asus, int kblv)
 		kblv = 0;
 
 	if (write_acpi_int(asus->handle, METHOD_KBD_LIGHT_SET, kblv)) {
-		pr_warning("Keyboard LED display write failed\n");
+		pr_warn("Keyboard LED display write failed\n");
 		return -EINVAL;
 	}
 	return 0;
@@ -531,7 +531,7 @@ static int asus_read_brightness(struct backlight_device *bd)
 	rv = acpi_evaluate_integer(asus->handle, METHOD_BRIGHTNESS_GET,
 				   NULL, &value);
 	if (ACPI_FAILURE(rv))
-		pr_warning("Error reading brightness\n");
+		pr_warn("Error reading brightness\n");
 
 	return value;
 }
@@ -541,7 +541,7 @@ static int asus_set_brightness(struct backlight_device *bd, int value)
 	struct asus_laptop *asus = bl_get_data(bd);
 
 	if (write_acpi_int(asus->handle, METHOD_BRIGHTNESS_SET, value)) {
-		pr_warning("Error changing brightness\n");
+		pr_warn("Error changing brightness\n");
 		return -EIO;
 	}
 	return 0;
@@ -730,7 +730,7 @@ static ssize_t store_ledd(struct device *dev, struct device_attribute *attr,
 	rv = parse_arg(buf, count, &value);
 	if (rv > 0) {
 		if (write_acpi_int(asus->handle, METHOD_LEDD, value)) {
-			pr_warning("LED display write failed\n");
+			pr_warn("LED display write failed\n");
 			return -ENODEV;
 		}
 		asus->ledd_status = (u32) value;
@@ -752,7 +752,7 @@ static int asus_wireless_status(struct asus_laptop *asus, int mask)
 	rv = acpi_evaluate_integer(asus->handle, METHOD_WL_STATUS,
 				   NULL, &status);
 	if (ACPI_FAILURE(rv)) {
-		pr_warning("Error reading Wireless status\n");
+		pr_warn("Error reading Wireless status\n");
 		return -EINVAL;
 	}
 	return !!(status & mask);
@@ -764,7 +764,7 @@ static int asus_wireless_status(struct asus_laptop *asus, int mask)
 static int asus_wlan_set(struct asus_laptop *asus, int status)
 {
 	if (write_acpi_int(asus->handle, METHOD_WLAN, !!status)) {
-		pr_warning("Error setting wlan status to %d", status);
+		pr_warn("Error setting wlan status to %d\n", status);
 		return -EIO;
 	}
 	return 0;
@@ -792,7 +792,7 @@ static ssize_t store_wlan(struct device *dev, struct device_attribute *attr,
 static int asus_bluetooth_set(struct asus_laptop *asus, int status)
 {
 	if (write_acpi_int(asus->handle, METHOD_BLUETOOTH, !!status)) {
-		pr_warning("Error setting bluetooth status to %d", status);
+		pr_warn("Error setting bluetooth status to %d\n", status);
 		return -EIO;
 	}
 	return 0;
@@ -821,7 +821,7 @@ static ssize_t store_bluetooth(struct device *dev,
 static int asus_wimax_set(struct asus_laptop *asus, int status)
 {
 	if (write_acpi_int(asus->handle, METHOD_WIMAX, !!status)) {
-		pr_warning("Error setting wimax status to %d", status);
+		pr_warn("Error setting wimax status to %d\n", status);
 		return -EIO;
 	}
 	return 0;
@@ -850,7 +850,7 @@ static ssize_t store_wimax(struct device *dev,
 static int asus_wwan_set(struct asus_laptop *asus, int status)
 {
 	if (write_acpi_int(asus->handle, METHOD_WWAN, !!status)) {
-		pr_warning("Error setting wwan status to %d", status);
+		pr_warn("Error setting wwan status to %d\n", status);
 		return -EIO;
 	}
 	return 0;
@@ -880,7 +880,7 @@ static void asus_set_display(struct asus_laptop *asus, int value)
 {
 	/* no sanity check needed for now */
 	if (write_acpi_int(asus->handle, METHOD_SWITCH_DISPLAY, value))
-		pr_warning("Error setting display\n");
+		pr_warn("Error setting display\n");
 	return;
 }
 
@@ -909,7 +909,7 @@ static ssize_t store_disp(struct device *dev, struct device_attribute *attr,
 static void asus_als_switch(struct asus_laptop *asus, int value)
 {
 	if (write_acpi_int(asus->handle, METHOD_ALS_CONTROL, value))
-		pr_warning("Error setting light sensor switch\n");
+		pr_warn("Error setting light sensor switch\n");
 	asus->light_switch = value;
 }
 
@@ -937,7 +937,7 @@ static ssize_t store_lssw(struct device *dev, struct device_attribute *attr,
 static void asus_als_level(struct asus_laptop *asus, int value)
 {
 	if (write_acpi_int(asus->handle, METHOD_ALS_LEVEL, value))
-		pr_warning("Error setting light sensor level\n");
+		pr_warn("Error setting light sensor level\n");
 	asus->light_level = value;
 }
 
@@ -976,7 +976,7 @@ static int asus_gps_status(struct asus_laptop *asus)
 	rv = acpi_evaluate_integer(asus->handle, METHOD_GPS_STATUS,
 				   NULL, &status);
 	if (ACPI_FAILURE(rv)) {
-		pr_warning("Error reading GPS status\n");
+		pr_warn("Error reading GPS status\n");
 		return -ENODEV;
 	}
 	return !!status;
@@ -1284,7 +1284,7 @@ static int asus_laptop_get_info(struct asus_laptop *asus)
 	 */
 	status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus->dsdt_info);
 	if (ACPI_FAILURE(status))
-		pr_warning("Couldn't get the DSDT table header\n");
+		pr_warn("Couldn't get the DSDT table header\n");
 
 	/* We have to write 0 on init this far for all ASUS models */
 	if (write_acpi_int_ret(asus->handle, "INIT", 0, &buffer)) {
@@ -1296,7 +1296,7 @@ static int asus_laptop_get_info(struct asus_laptop *asus)
 	status =
 	    acpi_evaluate_integer(asus->handle, "BSTS", NULL, &bsts_result);
 	if (ACPI_FAILURE(status))
-		pr_warning("Error calling BSTS\n");
+		pr_warn("Error calling BSTS\n");
 	else if (bsts_result)
 		pr_notice("BSTS called, 0x%02x returned\n",
 		       (uint) bsts_result);
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 832a3fd7c1c..00460cb9587 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -425,7 +425,7 @@ static void asus_rfkill_hotplug(struct asus_wmi *asus)
 	if (asus->hotplug_slot) {
 		bus = pci_find_bus(0, 1);
 		if (!bus) {
-			pr_warning("Unable to find PCI bus 1?\n");
+			pr_warn("Unable to find PCI bus 1?\n");
 			goto out_unlock;
 		}
 
@@ -436,12 +436,12 @@ static void asus_rfkill_hotplug(struct asus_wmi *asus)
 		absent = (l == 0xffffffff);
 
 		if (blocked != absent) {
-			pr_warning("BIOS says wireless lan is %s, "
-				   "but the pci device is %s\n",
-				   blocked ? "blocked" : "unblocked",
-				   absent ? "absent" : "present");
-			pr_warning("skipped wireless hotplug as probably "
-				   "inappropriate for this model\n");
+			pr_warn("BIOS says wireless lan is %s, "
+				"but the pci device is %s\n",
+				blocked ? "blocked" : "unblocked",
+				absent ? "absent" : "present");
+			pr_warn("skipped wireless hotplug as probably "
+				"inappropriate for this model\n");
 			goto out_unlock;
 		}
 
@@ -500,7 +500,7 @@ static int asus_register_rfkill_notifier(struct asus_wmi *asus, char *node)
 						     ACPI_SYSTEM_NOTIFY,
 						     asus_rfkill_notify, asus);
 		if (ACPI_FAILURE(status))
-			pr_warning("Failed to register notify on %s\n", node);
+			pr_warn("Failed to register notify on %s\n", node);
 	} else
 		return -ENODEV;
 
@@ -1223,7 +1223,7 @@ static int asus_wmi_sysfs_init(struct platform_device *device)
 /*
  * Platform device
  */
-static int __init asus_wmi_platform_init(struct asus_wmi *asus)
+static int asus_wmi_platform_init(struct asus_wmi *asus)
 {
 	int rv;
 
@@ -1583,12 +1583,12 @@ static int asus_wmi_probe(struct platform_device *pdev)
 	int ret;
 
 	if (!wmi_has_guid(ASUS_WMI_MGMT_GUID)) {
-		pr_warning("Management GUID not found\n");
+		pr_warn("Management GUID not found\n");
 		return -ENODEV;
 	}
 
 	if (wdrv->event_guid && !wmi_has_guid(wdrv->event_guid)) {
-		pr_warning("Event GUID not found\n");
+		pr_warn("Event GUID not found\n");
 		return -ENODEV;
 	}
 
diff --git a/drivers/platform/x86/asus_acpi.c b/drivers/platform/x86/asus_acpi.c
index f503607c064..d9312b3073e 100644
--- a/drivers/platform/x86/asus_acpi.c
+++ b/drivers/platform/x86/asus_acpi.c
@@ -30,6 +30,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -581,8 +583,7 @@ static int read_led(const char *ledname, int ledmask)
 		if (read_acpi_int(NULL, ledname, &led_status))
 			return led_status;
 		else
-			printk(KERN_WARNING "Asus ACPI: Error reading LED "
-			       "status\n");
+			pr_warn("Error reading LED status\n");
 	}
 	return (hotk->status & ledmask) ? 1 : 0;
 }
@@ -621,8 +622,7 @@ write_led(const char __user *buffer, unsigned long count,
 		led_out = !led_out;
 
 	if (!write_acpi_int(hotk->handle, ledname, led_out, NULL))
-		printk(KERN_WARNING "Asus ACPI: LED (%s) write failed\n",
-		       ledname);
+		pr_warn("LED (%s) write failed\n", ledname);
 
 	return rv;
 }
@@ -679,8 +679,7 @@ static ssize_t ledd_proc_write(struct file *file, const char __user *buffer,
 	if (rv > 0) {
 		if (!write_acpi_int
 		    (hotk->handle, hotk->methods->mt_ledd, value, NULL))
-			printk(KERN_WARNING
-			       "Asus ACPI: LED display write failed\n");
+			pr_warn("LED display write failed\n");
 		else
 			hotk->ledd_status = (u32) value;
 	}
@@ -838,8 +837,7 @@ static int get_lcd_state(void)
 	} else {
 		/* We don't have to check anything if we are here */
 		if (!read_acpi_int(NULL, hotk->methods->lcd_status, &lcd))
-			printk(KERN_WARNING
-			       "Asus ACPI: Error reading LCD status\n");
+			pr_warn("Error reading LCD status\n");
 
 		if (hotk->model == L2D)
 			lcd = ~lcd;
@@ -871,7 +869,7 @@ static int set_lcd_state(int value)
 			   the exact behaviour is simulated here */
 		}
 		if (ACPI_FAILURE(status))
-			printk(KERN_WARNING "Asus ACPI: Error switching LCD\n");
+			pr_warn("Error switching LCD\n");
 	}
 	return 0;
 
@@ -915,13 +913,11 @@ static int read_brightness(struct backlight_device *bd)
 	if (hotk->methods->brightness_get) {	/* SPLV/GPLV laptop */
 		if (!read_acpi_int(hotk->handle, hotk->methods->brightness_get,
 				   &value))
-			printk(KERN_WARNING
-			       "Asus ACPI: Error reading brightness\n");
+			pr_warn("Error reading brightness\n");
 	} else if (hotk->methods->brightness_status) {	/* For D1 for example */
 		if (!read_acpi_int(NULL, hotk->methods->brightness_status,
 				   &value))
-			printk(KERN_WARNING
-			       "Asus ACPI: Error reading brightness\n");
+			pr_warn("Error reading brightness\n");
 	} else			/* No GPLV method */
 		value = hotk->brightness;
 	return value;
@@ -939,8 +935,7 @@ static int set_brightness(int value)
 	if (hotk->methods->brightness_set) {
 		if (!write_acpi_int(hotk->handle, hotk->methods->brightness_set,
 				    value, NULL)) {
-			printk(KERN_WARNING
-			       "Asus ACPI: Error changing brightness\n");
+			pr_warn("Error changing brightness\n");
 			ret = -EIO;
 		}
 		goto out;
@@ -955,8 +950,7 @@ static int set_brightness(int value)
 					      NULL, NULL);
 		(value > 0) ? value-- : value++;
 		if (ACPI_FAILURE(status)) {
-			printk(KERN_WARNING
-			       "Asus ACPI: Error changing brightness\n");
+			pr_warn("Error changing brightness\n");
 			ret = -EIO;
 		}
 	}
@@ -1008,7 +1002,7 @@ static void set_display(int value)
 	/* no sanity check needed for now */
 	if (!write_acpi_int(hotk->handle, hotk->methods->display_set,
 			    value, NULL))
-		printk(KERN_WARNING "Asus ACPI: Error setting display\n");
+		pr_warn("Error setting display\n");
 	return;
 }
 
@@ -1021,8 +1015,7 @@ static int disp_proc_show(struct seq_file *m, void *v)
 	int value = 0;
 
 	if (!read_acpi_int(hotk->handle, hotk->methods->display_get, &value))
-		printk(KERN_WARNING
-		       "Asus ACPI: Error reading display status\n");
+		pr_warn("Error reading display status\n");
 	value &= 0x07;	/* needed for some models, shouldn't hurt others */
 	seq_printf(m, "%d\n", value);
 	return 0;
@@ -1068,7 +1061,7 @@ asus_proc_add(char *name, const struct file_operations *proc_fops, mode_t mode,
 	proc = proc_create_data(name, mode, acpi_device_dir(device),
 				proc_fops, acpi_driver_data(device));
 	if (!proc) {
-		printk(KERN_WARNING "  Unable to create %s fs entry\n", name);
+		pr_warn("  Unable to create %s fs entry\n", name);
 		return -1;
 	}
 	proc->uid = asus_uid;
@@ -1085,8 +1078,8 @@ static int asus_hotk_add_fs(struct acpi_device *device)
 		mode = S_IFREG | S_IRUGO | S_IWUSR | S_IWGRP;
 	} else {
 		mode = S_IFREG | S_IRUSR | S_IRGRP | S_I