Merge tag 'pinctrl-v3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl into next

Pull pin control changes from Linus Walleij:
 "This is the bulk of pin control changes for the v3.16 development
  cycle:

   - Antoine Tenart made the get_group_pins() vtable entry optional.

   - Antoine also provides an entirely new driver for the Marvell Berlin
     SoC.  This is unrelated to the existing MVEBU hardware driver and
     warrants its own separate driver.

   - reflected from the GPIO subsystem there is a number of refactorings
     to make pin control drivers with gpiochips use the new gpiolib
     irqchip helpers.  The following drivers were converted to use the
     new infrastructure:
       * ST Microelectronics STiH416 and friends
       * The Atmel AT91
       * The CSR SiRF (Prima2)
       * The Qualcomm MSM series

   - massive improvements in the Qualcomm MSM driver from Bjorn
     Andersson, Andy Gross and Kumar Gala.  Among those new support for
     the IPQ8064 and MSM8x74 SoC variants.

   - support for the Freescale i.MX6 SoloX SoC variant.

   - massive improvements in the Allwinner sunxi driver from Boris
     Brezillon, Maxime Ripard and Chen-Yu Tsai.

   - Renesas PFC updates from Laurent Pinchart, Kuninori Morimoto,
     Wolfram Sang and Magnus Damm.

   - Cleanups and refactorings of the nVidia Tegra driver from Stepgen
     Warren.

   - the Exynos driver now supports the Exynos3250 SoC.

   - Intel BayTrail updates from Jin Yao, Mika Westerberg.

   - the MVEBU driver now supports the Orion5x SoC variants, which is
     part of the effort of getting rid of the old Marvell kludges in
     arch/arm/mach-orion5x

   - Rockchip driver updates from Heiko Stuebner.

   - a ton of cleanups and janitorial patches from Axel Lin.

   - some minor fixes and improvements here and there"

* tag 'pinctrl-v3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (93 commits)
  pinctrl: sirf: fix a bad conflict resolution
  pinctrl: msm: Add more MSM8X74 pin definitions
  pinctrl: qcom: ipq8064: Fix naming convention
  pinctrl: msm: Add missing sdc1 and sdc3 groups
  pinctrl: sirf: switch to using allocated state container
  pinctrl: Enable "power-source" to be extracted from DT files
  pinctrl: sunxi: create irq/pin mapping during init
  pinctrl: pinconf-generic: Use kmemdup instead of kmalloc + memcpy
  pinctrl: berlin: Use devm_ioremap_resource()
  pinctrl: sirf: fix typo for GPIO bank number
  pinctrl: sunxi: depend on RESET_CONTROLLER
  pinctrl: sunxi: fix pin numbers passed to register offset helpers
  pinctrl: add pinctrl driver for imx6sx
  pinctrl/at91: Fix lockup when IRQ on PIOC and PIOD occurs
  pinctrl: msm: switch to using generic GPIO irqchip helpers
  pinctrl: sunxi: Fix multiple registration issue
  pinctrl: sunxi: Fix recursive dependency
  pinctrl: berlin: add the BG2CD pinctrl driver
  pinctrl: berlin: add the BG2 pinctrl driver
  pinctrl: berlin: add the BG2Q pinctrl driver
  ...

1 files changed, 67 insertions, 0 deletions

diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c
index 07c81306f2f..9609c23834c 100644
--- a/drivers/pinctrl/pinctrl-exynos.c
+++ b/drivers/pinctrl/pinctrl-exynos.c
@@ -718,6 +718,73 @@ struct samsung_pin_ctrl s5pv210_pin_ctrl[] = {
 	},
 };
 
+/* pin banks of exynos3250 pin-controller 0 */
+static struct samsung_pin_bank exynos3250_pin_banks0[] = {
+	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
+	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb",  0x08),
+	EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0", 0x0c),
+	EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1", 0x10),
+	EXYNOS_PIN_BANK_EINTG(4, 0x0a0, "gpd0", 0x14),
+	EXYNOS_PIN_BANK_EINTG(4, 0x0c0, "gpd1", 0x18),
+};
+
+/* pin banks of exynos3250 pin-controller 1 */
+static struct samsung_pin_bank exynos3250_pin_banks1[] = {
+	EXYNOS_PIN_BANK_EINTN(8, 0x120, "gpe0"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x140, "gpe1"),
+	EXYNOS_PIN_BANK_EINTN(3, 0x180, "gpe2"),
+	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpk0", 0x08),
+	EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1", 0x0c),
+	EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2", 0x10),
+	EXYNOS_PIN_BANK_EINTG(4, 0x0c0, "gpl0", 0x18),
+	EXYNOS_PIN_BANK_EINTG(8, 0x260, "gpm0", 0x24),
+	EXYNOS_PIN_BANK_EINTG(7, 0x280, "gpm1", 0x28),
+	EXYNOS_PIN_BANK_EINTG(5, 0x2a0, "gpm2", 0x2c),
+	EXYNOS_PIN_BANK_EINTG(8, 0x2c0, "gpm3", 0x30),
+	EXYNOS_PIN_BANK_EINTG(8, 0x2e0, "gpm4", 0x34),
+	EXYNOS_PIN_BANK_EINTW(8, 0xc00, "gpx0", 0x00),
+	EXYNOS_PIN_BANK_EINTW(8, 0xc20, "gpx1", 0x04),
+	EXYNOS_PIN_BANK_EINTW(8, 0xc40, "gpx2", 0x08),
+	EXYNOS_PIN_BANK_EINTW(8, 0xc60, "gpx3", 0x0c),
+};
+
+/*
+ * Samsung pinctrl driver data for Exynos3250 SoC. Exynos3250 SoC includes
+ * two gpio/pin-mux/pinconfig controllers.
+ */
+struct samsung_pin_ctrl exynos3250_pin_ctrl[] = {
+	{
+		/* pin-controller instance 0 data */
+		.pin_banks	= exynos3250_pin_banks0,
+		.nr_banks	= ARRAY_SIZE(exynos3250_pin_banks0),
+		.geint_con	= EXYNOS_GPIO_ECON_OFFSET,
+		.geint_mask	= EXYNOS_GPIO_EMASK_OFFSET,
+		.geint_pend	= EXYNOS_GPIO_EPEND_OFFSET,
+		.svc		= EXYNOS_SVC_OFFSET,
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+		.label		= "exynos3250-gpio-ctrl0",
+	}, {
+		/* pin-controller instance 1 data */
+		.pin_banks	= exynos3250_pin_banks1,
+		.nr_banks	= ARRAY_SIZE(exynos3250_pin_banks1),
+		.geint_con	= EXYNOS_GPIO_ECON_OFFSET,
+		.geint_mask	= EXYNOS_GPIO_EMASK_OFFSET,
+		.geint_pend	= EXYNOS_GPIO_EPEND_OFFSET,
+		.weint_con	= EXYNOS_WKUP_ECON_OFFSET,
+		.weint_mask	= EXYNOS_WKUP_EMASK_OFFSET,
+		.weint_pend	= EXYNOS_WKUP_EPEND_OFFSET,
+		.svc		= EXYNOS_SVC_OFFSET,
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.eint_wkup_init = exynos_eint_wkup_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+		.label		= "exynos3250-gpio-ctrl1",
+	},
+};
+
 /* pin banks of exynos4210 pin-controller 0 */
 static struct samsung_pin_bank exynos4210_pin_banks0[] = {
 	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),