Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 164 insertions, 0 deletions

diff --git a/drivers/pcmcia/o2micro.h b/drivers/pcmcia/o2micro.h
new file mode 100644
index 00000000000..b1f6e3d9ee0
--- /dev/null
+++ b/drivers/pcmcia/o2micro.h
@@ -0,0 +1,164 @@
+/*
+ * o2micro.h 1.13 1999/10/25 20:03:34
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License. 
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+ * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in which
+ * case the provisions of the GPL are applicable instead of the
+ * above.  If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use
+ * your version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL.  If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ */
+
+#ifndef _LINUX_O2MICRO_H
+#define _LINUX_O2MICRO_H
+
+#ifndef PCI_VENDOR_ID_O2
+#define PCI_VENDOR_ID_O2		0x1217
+#endif
+#ifndef PCI_DEVICE_ID_O2_6729
+#define PCI_DEVICE_ID_O2_6729		0x6729
+#endif
+#ifndef PCI_DEVICE_ID_O2_6730
+#define PCI_DEVICE_ID_O2_6730		0x673a
+#endif
+#ifndef PCI_DEVICE_ID_O2_6832
+#define PCI_DEVICE_ID_O2_6832		0x6832
+#endif
+#ifndef PCI_DEVICE_ID_O2_6836
+#define PCI_DEVICE_ID_O2_6836		0x6836
+#endif
+#ifndef PCI_DEVICE_ID_O2_6812
+#define PCI_DEVICE_ID_O2_6812		0x6872
+#endif
+
+/* Additional PCI configuration registers */
+
+#define O2_MUX_CONTROL		0x90	/* 32 bit */
+#define  O2_MUX_RING_OUT	0x0000000f
+#define  O2_MUX_SKTB_ACTV	0x000000f0
+#define  O2_MUX_SCTA_ACTV_ENA	0x00000100
+#define  O2_MUX_SCTB_ACTV_ENA	0x00000200
+#define  O2_MUX_SER_IRQ_ROUTE	0x0000e000
+#define  O2_MUX_SER_PCI		0x00010000
+
+#define  O2_MUX_SKTA_TURBO	0x000c0000	/* for 6833, 6860 */
+#define  O2_MUX_SKTB_TURBO	0x00300000
+#define  O2_MUX_AUX_VCC_3V	0x00400000
+#define  O2_MUX_PCI_VCC_5V	0x00800000
+#define  O2_MUX_PME_MUX		0x0f000000
+
+/* Additional ExCA registers */
+
+#define O2_MODE_A		0x38
+#define O2_MODE_A_2		0x26	/* for 6833B, 6860C */
+#define  O2_MODE_A_CD_PULSE	0x04
+#define  O2_MODE_A_SUSP_EDGE	0x08
+#define  O2_MODE_A_HOST_SUSP	0x10
+#define  O2_MODE_A_PWR_MASK	0x60
+#define  O2_MODE_A_QUIET	0x80
+
+#define O2_MODE_B		0x39
+#define O2_MODE_B_2		0x2e	/* for 6833B, 6860C */
+#define  O2_MODE_B_IDENT	0x03
+#define  O2_MODE_B_ID_BSTEP	0x00
+#define  O2_MODE_B_ID_CSTEP	0x01
+#define  O2_MODE_B_ID_O2	0x02
+#define  O2_MODE_B_VS1		0x04
+#define  O2_MODE_B_VS2		0x08
+#define  O2_MODE_B_IRQ15_RI	0x80
+
+#define O2_MODE_C		0x3a
+#define  O2_MODE_C_DREQ_MASK	0x03
+#define  O2_MODE_C_DREQ_INPACK	0x01
+#define  O2_MODE_C_DREQ_WP	0x02
+#define  O2_MODE_C_DREQ_BVD2	0x03
+#define  O2_MODE_C_ZVIDEO	0x08
+#define  O2_MODE_C_IREQ_SEL	0x30
+#define  O2_MODE_C_MGMT_SEL	0xc0
+
+#define O2_MODE_D		0x3b
+#define  O2_MODE_D_IRQ_MODE	0x03
+#define  O2_MODE_D_PCI_CLKRUN	0x04
+#define  O2_MODE_D_CB_CLKRUN	0x08
+#define  O2_MODE_D_SKT_ACTV	0x20
+#define  O2_MODE_D_PCI_FIFO	0x40	/* for OZ6729, OZ6730 */
+#define  O2_MODE_D_W97_IRQ	0x40
+#define  O2_MODE_D_ISA_IRQ	0x80
+
+#define O2_MHPG_DMA		0x3c
+#define  O2_MHPG_CHANNEL	0x07
+#define  O2_MHPG_CINT_ENA	0x08
+#define  O2_MHPG_CSC_ENA	0x10
+
+#define O2_FIFO_ENA		0x3d
+#define  O2_FIFO_ZVIDEO_3	0x08
+#define  O2_FIFO_PCI_FIFO	0x10
+#define  O2_FIFO_POSTWR		0x40
+#define  O2_FIFO_BUFFER		0x80
+
+#define O2_MODE_E		0x3e
+#define  O2_MODE_E_MHPG_DMA	0x01
+#define  O2_MODE_E_SPKR_OUT	0x02
+#define  O2_MODE_E_LED_OUT	0x08
+#define  O2_MODE_E_SKTA_ACTV	0x10
+
+static int o2micro_override(struct yenta_socket *socket)
+{
+	/*
+	 * 'reserved' register at 0x94/D4. chaning it to 0xCA (8 bit) enables
+	 * read prefetching which for example makes the RME Hammerfall DSP
+	 * working. for some bridges it is at 0x94, for others at 0xD4. it's
+	 * ok to write to both registers on all O2 bridges.
+	 * from Eric Still, 02Micro.
+	 */
+	u8 a, b;
+
+	if (PCI_FUNC(socket->dev->devfn) == 0) {
+		a = config_readb(socket, 0x94);
+		b = config_readb(socket, 0xD4);
+
+		printk(KERN_INFO "Yenta O2: res at 0x94/0xD4: %02x/%02x\n", a, b);
+
+		switch (socket->dev->device) {
+		case PCI_DEVICE_ID_O2_6832:
+			printk(KERN_INFO "Yenta O2: old bridge, not enabling read prefetch / write burst\n");
+			break;
+
+		default:
+			printk(KERN_INFO "Yenta O2: enabling read prefetch/write burst\n");
+			config_writeb(socket, 0x94, a | 0x0a);
+			config_writeb(socket, 0xD4, b | 0x0a);
+		}
+	}
+
+	return 0;
+}
+
+static void o2micro_restore_state(struct yenta_socket *socket)
+{
+	/*
+	 * as long as read prefetch is the only thing in
+	 * o2micro_override, it's safe to call it from here
+	 */
+	o2micro_override(socket);
+}
+
+#endif /* _LINUX_O2MICRO_H */