Merge branch 'pci/aw-reset-v5' into next

* pci/aw-reset-v5:
  PCI: Add pci_probe_reset_slot() and pci_probe_reset_bus()
  PCI: Remove aer_do_secondary_bus_reset()
  PCI: Tune secondary bus reset timing
  PCI: Wake-up devices before saving config space for reset
  PCI: Add pci_reset_slot() and pci_reset_bus()
  PCI: Split out pci_dev lock/unlock and save/restore
  PCI: Add slot reset option to pci_dev_reset()
  PCI: pciehp: Add reset_slot() method
  PCI: Add hotplug_slot_ops.reset_slot()
  PCI: Add pci_reset_bridge_secondary_bus()

7 files changed, 393 insertions, 62 deletions

diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index 7fb326983ed..541bbe6d534 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -155,6 +155,7 @@ void pciehp_green_led_off(struct slot *slot);
 void pciehp_green_led_blink(struct slot *slot);
 int pciehp_check_link_status(struct controller *ctrl);
 void pciehp_release_ctrl(struct controller *ctrl);
+int pciehp_reset_slot(struct slot *slot, int probe);
 
 static inline const char *slot_name(struct slot *slot)
 {
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 7d72c5e2eba..f4a18f51a29 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -69,6 +69,7 @@ static int get_power_status	(struct hotplug_slot *slot, u8 *value);
 static int get_attention_status	(struct hotplug_slot *slot, u8 *value);
 static int get_latch_status	(struct hotplug_slot *slot, u8 *value);
 static int get_adapter_status	(struct hotplug_slot *slot, u8 *value);
+static int reset_slot		(struct hotplug_slot *slot, int probe);
 
 /**
  * release_slot - free up the memory used by a slot
@@ -111,6 +112,7 @@ static int init_slot(struct controller *ctrl)
 	ops->disable_slot = disable_slot;
 	ops->get_power_status = get_power_status;
 	ops->get_adapter_status = get_adapter_status;
+	ops->reset_slot = reset_slot;
 	if (MRL_SENS(ctrl))
 		ops->get_latch_status = get_latch_status;
 	if (ATTN_LED(ctrl)) {
@@ -223,6 +225,16 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
 	return pciehp_get_adapter_status(slot, value);
 }
 
+static int reset_slot(struct hotplug_slot *hotplug_slot, int probe)
+{
+	struct slot *slot = hotplug_slot->private;
+
+	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
+		 __func__, slot_name(slot));
+
+	return pciehp_reset_slot(slot, probe);
+}
+
 static int pciehp_probe(struct pcie_device *dev)
 {
 	int rc;
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index b2255736ac8..51f56ef4ab6 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -749,6 +749,37 @@ static void pcie_disable_notification(struct controller *ctrl)
 		ctrl_warn(ctrl, "Cannot disable software notification\n");
 }
 
+/*
+ * pciehp has a 1:1 bus:slot relationship so we ultimately want a secondary
+ * bus reset of the bridge, but if the slot supports surprise removal we need
+ * to disable presence detection around the bus reset and clear any spurious
+ * events after.
+ */
+int pciehp_reset_slot(struct slot *slot, int probe)
+{
+	struct controller *ctrl = slot->ctrl;
+
+	if (probe)
+		return 0;
+
+	if (HP_SUPR_RM(ctrl)) {
+		pcie_write_cmd(ctrl, 0, PCI_EXP_SLTCTL_PDCE);
+		if (pciehp_poll_mode)
+			del_timer_sync(&ctrl->poll_timer);
+	}
+
+	pci_reset_bridge_secondary_bus(ctrl->pcie->port);
+
+	if (HP_SUPR_RM(ctrl)) {
+		pciehp_writew(ctrl, PCI_EXP_SLTSTA, PCI_EXP_SLTSTA_PDC);
+		pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PDCE, PCI_EXP_SLTCTL_PDCE);
+		if (pciehp_poll_mode)
+			int_poll_timeout(ctrl->poll_timer.data);
+	}
+
+	return 0;
+}
+
 int pcie_init_notification(struct controller *ctrl)
 {
 	if (pciehp_request_irq(ctrl))
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 7d6ce2ec04e..10e3c4e1517 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/device.h>
 #include <linux/pm_runtime.h>
+#include <linux/pci_hotplug.h>
 #include <asm-generic/pci-bridge.h>
 #include <asm/setup.h>
 #include "pci.h"
@@ -3288,9 +3289,42 @@ static int pci_pm_reset(struct pci_dev *dev, int probe)
 	return 0;
 }
 
-static int pci_parent_bus_reset(struct pci_dev *dev, int probe)
+/**
+ * pci_reset_bridge_secondary_bus - Reset the secondary bus on a PCI bridge.
+ * @dev: Bridge device
+ *
+ * Use the bridge control register to assert reset on the secondary bus.
+ * Devices on the secondary bus are left in power-on state.
+ */
+void pci_reset_bridge_secondary_bus(struct pci_dev *dev)
 {
 	u16 ctrl;
+
+	pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl);
+	ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
+	pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
+	/*
+	 * PCI spec v3.0 7.6.4.2 requires minimum Trst of 1ms.  Double
+	 * this to 2ms to ensure that we meet the minium requirement.
+	 */
+	msleep(2);
+
+	ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
+	pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
+
+	/*
+	 * Trhfa for conventional PCI is 2^25 clock cycles.
+	 * Assuming a minimum 33MHz clock this results in a 1s
+	 * delay before we can consider subordinate devices to
+	 * be re-initialized.  PCIe has some ways to shorten this,
+	 * but we don't make use of them yet.
+	 */
+	ssleep(1);
+}
+EXPORT_SYMBOL_GPL(pci_reset_bridge_secondary_bus);
+
+static int pci_parent_bus_reset(struct pci_dev *dev, int probe)
+{
 	struct pci_dev *pdev;
 
 	if (pci_is_root_bus(dev->bus) || dev->subordinate || !dev->bus->self)
@@ -3303,18 +3337,40 @@ static int pci_parent_bus_reset(struct pci_dev *dev, int probe)
 	if (probe)
 		return 0;
 
-	pci_read_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, &ctrl);
-	ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
-	pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl);
-	msleep(100);
-
-	ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
-	pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl);
-	msleep(100);
+	pci_reset_bridge_secondary_bus(dev->bus->self);
 
 	return 0;
 }
 
+static int pci_reset_hotplug_slot(struct hotplug_slot *hotplug, int probe)
+{
+	int rc = -ENOTTY;
+
+	if (!hotplug || !try_module_get(hotplug->ops->owner))
+		return rc;
+
+	if (hotplug->ops->reset_slot)
+		rc = hotplug->ops->reset_slot(hotplug, probe);
+
+	module_put(hotplug->ops->owner);
+
+	return rc;
+}
+
+static int pci_dev_reset_slot_function(struct pci_dev *dev, int probe)
+{
+	struct pci_dev *pdev;
+
+	if (dev->subordinate || !dev->slot)
+		return -ENOTTY;
+
+	list_for_each_entry(pdev, &dev->bus->devices, bus_list)
+		if (pdev != dev && pdev->slot == dev->slot)
+			return -ENOTTY;
+
+	return pci_reset_hotplug_slot(dev->slot->hotplug, probe);
+}
+
 static int __pci_dev_reset(struct pci_dev *dev, int probe)
 {
 	int rc;
@@ -3337,27 +3393,65 @@ static int __pci_dev_reset(struct pci_dev *dev, int probe)
 	if (rc != -ENOTTY)
 		goto done;
 
+	rc = pci_dev_reset_slot_function(dev, probe);
+	if (rc != -ENOTTY)
+		goto done;
+
 	rc = pci_parent_bus_reset(dev, probe);
 done:
 	return rc;
 }
 
+static void pci_dev_lock(struct pci_dev *dev)
+{
+	pci_cfg_access_lock(dev);
+	/* block PM suspend, driver probe, etc. */
+	device_lock(&dev->dev);
+}
+
+static void pci_dev_unlock(struct pci_dev *dev)
+{
+	device_unlock(&dev->dev);
+	pci_cfg_access_unlock(dev);
+}
+
+static void pci_dev_save_and_disable(struct pci_dev *dev)
+{
+	/*
+	 * Wake-up device prior to save.  PM registers default to D0 after
+	 * reset and a simple register restore doesn't reliably return
+	 * to a non-D0 state anyway.
+	 */
+	pci_set_power_state(dev, PCI_D0);
+
+	pci_save_state(dev);
+	/*
+	 * Disable the device by clearing the Command register, except for
+	 * INTx-disable which is set.  This not only disables MMIO and I/O port
+	 * BARs, but also prevents the device from being Bus Master, preventing
+	 * DMA from the device including MSI/MSI-X interrupts.  For PCI 2.3
+	 * compliant devices, INTx-disable prevents legacy interrupts.
+	 */
+	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
+}
+
+static void pci_dev_restore(struct pci_dev *dev)
+{
+	pci_restore_state(dev);
+}
+
 static int pci_dev_reset(struct pci_dev *dev, int probe)
 {
 	int rc;
 
-	if (!probe) {
-		pci_cfg_access_lock(dev);
-		/* block PM suspend, driver probe, etc. */
-		device_lock(&dev->dev);
-	}
+	if (!probe)
+		pci_dev_lock(dev);
 
 	rc = __pci_dev_reset(dev, probe);
 
-	if (!probe) {
-		device_unlock(&dev->dev);
-		pci_cfg_access_unlock(dev);
-	}
+	if (!probe)
+		pci_dev_unlock(dev);
+
 	return rc;
 }
 /**
@@ -3448,22 +3542,249 @@ int pci_reset_function(struct pci_dev *dev)
 	if (rc)
 		return rc;
 
-	pci_save_state(dev);
-
-	/*
-	 * both INTx and MSI are disabled after the Interrupt Disable bit
-	 * is set and the Bus Master bit is cleared.
-	 */
-	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
+	pci_dev_save_and_disable(dev);
 
 	rc = pci_dev_reset(dev, 0);
 
-	pci_restore_state(dev);
+	pci_dev_restore(dev);
 
 	return rc;
 }
 EXPORT_SYMBOL_GPL(pci_reset_function);
 
+/* Lock devices from the top of the tree down */
+static void pci_bus_lock(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		pci_dev_lock(dev);
+		if (dev->subordinate)
+			pci_bus_lock(dev->subordinate);
+	}
+}
+
+/* Unlock devices from the bottom of the tree up */
+static void pci_bus_unlock(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		if (dev->subordinate)
+			pci_bus_unlock(dev->subordinate);
+		pci_dev_unlock(dev);
+	}
+}
+
+/* Lock devices from the top of the tree down */
+static void pci_slot_lock(struct pci_slot *slot)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &slot->bus->devices, bus_list) {
+		if (!dev->slot || dev->slot != slot)
+			continue;
+		pci_dev_lock(dev);
+		if (dev->subordinate)
+			pci_bus_lock(dev->subordinate);
+	}
+}
+
+/* Unlock devices from the bottom of the tree up */
+static void pci_slot_unlock(struct pci_slot *slot)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &slot->bus->devices, bus_list) {
+		if (!dev->slot || dev->slot != slot)
+			continue;
+		if (dev->subordinate)
+			pci_bus_unlock(dev->subordinate);
+		pci_dev_unlock(dev);
+	}
+}
+
+/* Save and disable devices from the top of the tree down */
+static void pci_bus_save_and_disable(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		pci_dev_save_and_disable(dev);
+		if (dev->subordinate)
+			pci_bus_save_and_disable(dev->subordinate);
+	}
+}
+
+/*
+ * Restore devices from top of the tree down - parent bridges need to be
+ * restored before we can get to subordinate devices.
+ */
+static void pci_bus_restore(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		pci_dev_restore(dev);
+		if (dev->subordinate)
+			pci_bus_restore(dev->subordinate);
+	}
+}
+
+/* Save and disable devices from the top of the tree down */
+static void pci_slot_save_and_disable(struct pci_slot *slot)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &slot->bus->devices, bus_list) {
+		if (!dev->slot || dev->slot != slot)
+			continue;
+		pci_dev_save_and_disable(dev);
+		if (dev->subordinate)
+			pci_bus_save_and_disable(dev->subordinate);
+	}
+}
+
+/*
+ * Restore devices from top of the tree down - parent bridges need to be
+ * restored before we can get to subordinate devices.
+ */
+static void pci_slot_restore(struct pci_slot *slot)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &slot->bus->devices, bus_list) {
+		if (!dev->slot || dev->slot != slot)
+			continue;
+		pci_dev_restore(dev);
+		if (dev->subordinate)
+			pci_bus_restore(dev->subordinate);
+	}
+}
+
+static int pci_slot_reset(struct pci_slot *slot, int probe)
+{
+	int rc;
+
+	if (!slot)
+		return -ENOTTY;
+
+	if (!probe)
+		pci_slot_lock(slot);
+
+	might_sleep();
+
+	rc = pci_reset_hotplug_slot(slot->hotplug, probe);
+
+	if (!probe)
+		pci_slot_unlock(slot);
+
+	return rc;
+}
+
+/**
+ * pci_probe_reset_slot - probe whether a PCI slot can be reset
+ * @slot: PCI slot to probe
+ *
+ * Return 0 if slot can be reset, negative if a slot reset is not supported.
+ */
+int pci_probe_reset_slot(struct pci_slot *slot)
+{
+	return pci_slot_reset(slot, 1);
+}
+EXPORT_SYMBOL_GPL(pci_probe_reset_slot);
+
+/**
+ * pci_reset_slot - reset a PCI slot
+ * @slot: PCI slot to reset
+ *
+ * A PCI bus may host multiple slots, each slot may support a reset mechanism
+ * independent of other slots.  For instance, some slots may support slot power
+ * control.  In the case of a 1:1 bus to slot architecture, this function may
+ * wrap the bus reset to avoid spurious slot related events such as hotplug.
+ * Generally a slot reset should be attempted before a bus reset.  All of the
+ * function of the slot and any subordinate buses behind the slot are reset
+ * through this function.  PCI config space of all devices in the slot and
+ * behind the slot is saved before and restored after reset.
+ *
+ * Return 0 on success, non-zero on error.
+ */
+int pci_reset_slot(struct pci_slot *slot)
+{
+	int rc;
+
+	rc = pci_slot_reset(slot, 1);
+	if (rc)
+		return rc;
+
+	pci_slot_save_and_disable(slot);
+
+	rc = pci_slot_reset(slot, 0);
+
+	pci_slot_restore(slot);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(pci_reset_slot);
+
+static int pci_bus_reset(struct pci_bus *bus, int probe)
+{
+	if (!bus->self)
+		return -ENOTTY;
+
+	if (probe)
+		return 0;
+
+	pci_bus_lock(bus);
+
+	might_sleep();
+
+	pci_reset_bridge_secondary_bus(bus->self);
+
+	pci_bus_unlock(bus);
+
+	return 0;
+}
+
+/**
+ * pci_probe_reset_bus - probe whether a PCI bus can be reset
+ * @bus: PCI bus to probe
+ *
+ * Return 0 if bus can be reset, negative if a bus reset is not supported.
+ */
+int pci_probe_reset_bus(struct pci_bus *bus)
+{
+	return pci_bus_reset(bus, 1);
+}
+EXPORT_SYMBOL_GPL(pci_probe_reset_bus);
+
+/**
+ * pci_reset_bus - reset a PCI bus
+ * @bus: top level PCI bus to reset
+ *
+ * Do a bus reset on the given bus and any subordinate buses, saving
+ * and restoring state of all devices.
+ *
+ * Return 0 on success, non-zero on error.
+ */
+int pci_reset_bus(struct pci_bus *bus)
+{
+	int rc;
+
+	rc = pci_bus_reset(bus, 1);
+	if (rc)
+		return rc;
+
+	pci_bus_save_and_disable(bus);
+
+	rc = pci_bus_reset(bus, 0);
+
+	pci_bus_restore(bus);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(pci_reset_bus);
+
 /**
  * pcix_get_max_mmrbc - get PCI-X maximum designed memory read byte count
  * @dev: PCI device to query
diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c
index 76ef634caf6..0bf82a20a0f 100644
--- a/drivers/pci/pcie/aer/aerdrv.c
+++ b/drivers/pci/pcie/aer/aerdrv.c
@@ -352,7 +352,7 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
 	reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
 	pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, reg32);
 
-	aer_do_secondary_bus_reset(dev);
+	pci_reset_bridge_secondary_bus(dev);
 	dev_printk(KERN_DEBUG, &dev->dev, "Root Port link has been reset\n");
 
 	/* Clear Root Error Status */
diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h
index 90ea3e88041..84420b7c945 100644
--- a/drivers/pci/pcie/aer/aerdrv.h
+++ b/drivers/pci/pcie/aer/aerdrv.h
@@ -106,7 +106,6 @@ static inline pci_ers_result_t merge_result(enum pci_ers_result orig,
 }
 
 extern struct bus_type pcie_port_bus_type;
-void aer_do_secondary_bus_reset(struct pci_dev *dev);
 int aer_init(struct pcie_device *dev);
 void aer_isr(struct work_struct *work);
 void aer_print_error(struct pci_dev *dev, struct aer_err_info *info);
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index 8b68ae59b7b..85ca36f2136 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -367,39 +367,6 @@ static pci_ers_result_t broadcast_error_message(struct pci_dev *dev,
 }
 
 /**
- * aer_do_secondary_bus_reset - perform secondary bus reset
- * @dev: pointer to bridge's pci_dev data structure
- *
- * Invoked when performing link reset at Root Port or Downstream Port.
- */
-void aer_do_secondary_bus_reset(struct pci_dev *dev)
-{
-	u16 p2p_ctrl;
-
-	/* Assert Secondary Bus Reset */
-	pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &p2p_ctrl);
-	p2p_ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
-	pci_write_config_word(dev, PCI_BRIDGE_CONTROL, p2p_ctrl);
-
-	/*
-	 * we should send hot reset message for 2ms to allow it time to
-	 * propagate to all downstream ports
-	 */
-	msleep(2);
-
-	/* De-assert Secondary Bus Reset */
-	p2p_ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
-	pci_write_config_word(dev, PCI_BRIDGE_CONTROL, p2p_ctrl);
-
-	/*
-	 * System software must wait for at least 100ms from the end
-	 * of a reset of one or more device before it is permitted
-	 * to issue Configuration Requests to those devices.
-	 */
-	msleep(200);
-}
-
-/**
  * default_reset_link - default reset function
  * @dev: pointer to pci_dev data structure
  *
@@ -408,7 +375,7 @@ void aer_do_secondary_bus_reset(struct pci_dev *dev)
  */
 static pci_ers_result_t default_reset_link(struct pci_dev *dev)
 {
-	aer_do_secondary_bus_reset(dev);
+	pci_reset_bridge_secondary_bus(dev);
 	dev_printk(KERN_DEBUG, &dev->dev, "downstream link has been reset\n");
 	return PCI_ERS_RESULT_RECOVERED;
 }