PCI hotplug: create symlink to hotplug driver module

Create symbolic link to hotplug driver module in the PCI slot
directory (/sys/bus/pci/slots/<SLOT#>). In the past, we need to load
hotplug drivers one by one to identify the hotplug driver that handles
the slot, and it was very inconvenient especially for trouble shooting.
With this change, we can easily identify the hotplug driver.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Reviewed-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

1 files changed, 16 insertions, 7 deletions

diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index ff32c6b4ae1..844580489d4 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -424,6 +424,9 @@ static int fs_add_slot(struct pci_slot *slot)
 {
 	int retval = 0;
 
+	/* Create symbolic link to the hotplug driver module */
+	pci_hp_create_module_link(slot);
+
 	if (has_power_file(slot)) {
 		retval = sysfs_create_file(&slot->kobj,
 					   &hotplug_slot_attr_power.attr);
@@ -498,6 +501,7 @@ exit_attention:
 	if (has_power_file(slot))
 		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_power.attr);
 exit_power:
+	pci_hp_remove_module_link(slot);
 exit:
 	return retval;
 }
@@ -528,6 +532,8 @@ static void fs_remove_slot(struct pci_slot *slot)
 
 	if (has_test_file(slot))
 		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_test.attr);
+
+	pci_hp_remove_module_link(slot);
 }
 
 static struct hotplug_slot *get_slot_from_name (const char *name)
@@ -544,10 +550,10 @@ static struct hotplug_slot *get_slot_from_name (const char *name)
 }
 
 /**
- * pci_hp_register - register a hotplug_slot with the PCI hotplug subsystem
+ * __pci_hp_register - register a hotplug_slot with the PCI hotplug subsystem
  * @bus: bus this slot is on
  * @slot: pointer to the &struct hotplug_slot to register
- * @slot_nr: slot number
+ * @devnr: device number
  * @name: name registered with kobject core
  *
  * Registers a hotplug slot with the pci hotplug subsystem, which will allow
@@ -555,8 +561,9 @@ static struct hotplug_slot *get_slot_from_name (const char *name)
  *
  * Returns 0 if successful, anything else for an error.
  */
-int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr,
-			const char *name)
+int __pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus,
+		      int devnr, const char *name,
+		      struct module *owner, const char *mod_name)
 {
 	int result;
 	struct pci_slot *pci_slot;
@@ -571,14 +578,16 @@ int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr,
 		return -EINVAL;
 	}
 
-	mutex_lock(&pci_hp_mutex);
+	slot->ops->owner = owner;
+	slot->ops->mod_name = mod_name;
 
+	mutex_lock(&pci_hp_mutex);
 	/*
 	 * No problems if we call this interface from both ACPI_PCI_SLOT
 	 * driver and call it here again. If we've already created the
 	 * pci_slot, the interface will simply bump the refcount.
 	 */
-	pci_slot = pci_create_slot(bus, slot_nr, name, slot);
+	pci_slot = pci_create_slot(bus, devnr, name, slot);
 	if (IS_ERR(pci_slot)) {
 		result = PTR_ERR(pci_slot);
 		goto out;
@@ -688,6 +697,6 @@ MODULE_LICENSE("GPL");
 module_param(debug, bool, 0644);
 MODULE_PARM_DESC(debug, "Debugging mode enabled or not");
 
-EXPORT_SYMBOL_GPL(pci_hp_register);
+EXPORT_SYMBOL_GPL(__pci_hp_register);
 EXPORT_SYMBOL_GPL(pci_hp_deregister);
 EXPORT_SYMBOL_GPL(pci_hp_change_slot_info);