diff options
| author | Ben Hutchings <bhutchings@solarflare.com> | 2012-07-10 10:56:00 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2012-07-10 23:13:46 -0700 |
| commit | 49ce9c2cda18f62b13055dc715e7b514157c2da8 (patch) | |
| tree | 432dea5cfd5c5f4b95a71a1e958e13b5cc538a1f /drivers/net | |
| parent | ae86b9e3846f6fc5509dee721f2bdba1db8ab96a (diff) | |
drivers/net/ethernet: Fix (nearly-)kernel-doc comments for various functions
Fix incorrect start markers, wrapped summary lines, missing section
breaks, incorrect separators, and some name mismatches. Delete
a few that are content-free.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net')
44 files changed, 378 insertions, 410 deletions
diff --git a/drivers/net/ethernet/3com/3c501.c b/drivers/net/ethernet/3com/3c501.c index bf73e1a0229..2038eaabaea 100644 --- a/drivers/net/ethernet/3com/3c501.c +++ b/drivers/net/ethernet/3com/3c501.c @@ -143,7 +143,7 @@ static int irq = 5; static int mem_start; /** - * el1_probe: - probe for a 3c501 + * el1_probe - probe for a 3c501 * @dev: The device structure passed in to probe. * * This can be called from two places. The network layer will probe using diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index 85717cb306d..42c13d8280c 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -166,7 +166,7 @@ static void atl1c_reset_pcie(struct atl1c_hw *hw, u32 flag) msleep(5); } -/* +/** * atl1c_irq_enable - Enable default interrupt generation settings * @adapter: board private structure */ @@ -179,7 +179,7 @@ static inline void atl1c_irq_enable(struct atl1c_adapter *adapter) } } -/* +/** * atl1c_irq_disable - Mask off interrupt generation on the NIC * @adapter: board private structure */ @@ -192,7 +192,7 @@ static inline void atl1c_irq_disable(struct atl1c_adapter *adapter) synchronize_irq(adapter->pdev->irq); } -/* +/** * atl1c_irq_reset - reset interrupt confiure on the NIC * @adapter: board private structure */ @@ -220,7 +220,7 @@ static u32 atl1c_wait_until_idle(struct atl1c_hw *hw, u32 modu_ctrl) return data; } -/* +/** * atl1c_phy_config - Timer Call-back * @data: pointer to netdev cast into an unsigned long */ @@ -361,7 +361,7 @@ static void atl1c_del_timer(struct atl1c_adapter *adapter) } -/* +/** * atl1c_tx_timeout - Respond to a Tx Hang * @netdev: network interface device structure */ @@ -374,7 +374,7 @@ static void atl1c_tx_timeout(struct net_device *netdev) schedule_work(&adapter->common_task); } -/* +/** * atl1c_set_multi - Multicast and Promiscuous mode set * @netdev: network interface device structure * @@ -453,7 +453,7 @@ static void atl1c_restore_vlan(struct atl1c_adapter *adapter) atl1c_vlan_mode(adapter->netdev, adapter->netdev->features); } -/* +/** * atl1c_set_mac - Change the Ethernet Address of the NIC * @netdev: network interface device structure * @p: pointer to an address structure @@ -518,7 +518,7 @@ static int atl1c_set_features(struct net_device *netdev, return 0; } -/* +/** * atl1c_change_mtu - Change the Maximum Transfer Unit * @netdev: network interface device structure * @new_mtu: new value for maximum frame size @@ -577,12 +577,6 @@ static void atl1c_mdio_write(struct net_device *netdev, int phy_id, atl1c_write_phy_reg(&adapter->hw, reg_num, val); } -/* - * atl1c_mii_ioctl - - * @netdev: - * @ifreq: - * @cmd: - */ static int atl1c_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) { @@ -633,12 +627,6 @@ out: return retval; } -/* - * atl1c_ioctl - - * @netdev: - * @ifreq: - * @cmd: - */ static int atl1c_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) { switch (cmd) { @@ -651,7 +639,7 @@ static int atl1c_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) } } -/* +/** * atl1c_alloc_queues - Allocate memory for all rings * @adapter: board private structure to initialize * @@ -755,7 +743,7 @@ static void __devinit atl1c_patch_assign(struct atl1c_hw *hw) i++; } } -/* +/** * atl1c_sw_init - Initialize general software structures (struct atl1c_adapter) * @adapter: board private structure to initialize * @@ -853,7 +841,7 @@ static inline void atl1c_clean_buffer(struct pci_dev *pdev, buffer_info->skb = NULL; ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_FREE); } -/* +/** * atl1c_clean_tx_ring - Free Tx-skb * @adapter: board private structure */ @@ -878,7 +866,7 @@ static void atl1c_clean_tx_ring(struct atl1c_adapter *adapter, tpd_ring->next_to_use = 0; } -/* +/** * atl1c_clean_rx_ring - Free rx-reservation skbs * @adapter: board private structure */ @@ -931,7 +919,7 @@ static void atl1c_init_ring_ptrs(struct atl1c_adapter *adapter) } } -/* +/** * atl1c_free_ring_resources - Free Tx / RX descriptor Resources * @adapter: board private structure * @@ -954,7 +942,7 @@ static void atl1c_free_ring_resources(struct atl1c_adapter *adapter) } } -/* +/** * atl1c_setup_mem_resources - allocate Tx / RX descriptor resources * @adapter: board private structure * @@ -1363,7 +1351,7 @@ static void atl1c_set_aspm(struct atl1c_hw *hw, u16 link_speed) return; } -/* +/** * atl1c_configure - Configure Transmit&Receive Unit after Reset * @adapter: board private structure * @@ -1477,7 +1465,7 @@ static void atl1c_update_hw_stats(struct atl1c_adapter *adapter) } } -/* +/** * atl1c_get_stats - Get System Network Statistics * @netdev: network interface device structure * @@ -1558,11 +1546,10 @@ static bool atl1c_clean_tx_irq(struct atl1c_adapter *adapter, return true; } -/* +/** * atl1c_intr - Interrupt Handler * @irq: interrupt number * @data: pointer to a network interface device structure - * @pt_regs: CPU registers structure */ static irqreturn_t atl1c_intr(int irq, void *data) { @@ -1813,9 +1800,8 @@ rrs_checked: atl1c_alloc_rx_buffer(adapter); } -/* +/** * atl1c_clean - NAPI Rx polling callback - * @adapter: board private structure */ static int atl1c_clean(struct napi_struct *napi, int budget) { @@ -2270,7 +2256,7 @@ static void atl1c_down(struct atl1c_adapter *adapter) atl1c_reset_dma_ring(adapter); } -/* +/** * atl1c_open - Called when a network interface is made active * @netdev: network interface device structure * @@ -2309,7 +2295,7 @@ err_up: return err; } -/* +/** * atl1c_close - Disables a network interface * @netdev: network interface device structure * @@ -2432,7 +2418,7 @@ static int atl1c_init_netdev(struct net_device *netdev, struct pci_dev *pdev) return 0; } -/* +/** * atl1c_probe - Device Initialization Routine * @pdev: PCI device information struct * @ent: entry in atl1c_pci_tbl @@ -2579,7 +2565,7 @@ err_dma: return err; } -/* +/** * atl1c_remove - Device Removal Routine * @pdev: PCI device information struct * @@ -2605,7 +2591,7 @@ static void __devexit atl1c_remove(struct pci_dev *pdev) free_netdev(netdev); } -/* +/** * atl1c_io_error_detected - called when PCI error is detected * @pdev: Pointer to PCI device * @state: The current pci connection state @@ -2633,7 +2619,7 @@ static pci_ers_result_t atl1c_io_error_detected(struct pci_dev *pdev, return PCI_ERS_RESULT_NEED_RESET; } -/* +/** * atl1c_io_slot_reset - called after the pci bus has been reset. * @pdev: Pointer to PCI device * @@ -2661,7 +2647,7 @@ static pci_ers_result_t atl1c_io_slot_reset(struct pci_dev *pdev) return PCI_ERS_RESULT_RECOVERED; } -/* +/** * atl1c_io_resume - called when traffic can start flowing again. * @pdev: Pointer to PCI device * @@ -2704,7 +2690,7 @@ static struct pci_driver atl1c_driver = { .driver.pm = &atl1c_pm_ops, }; -/* +/** * atl1c_init_module - Driver Registration Routine * * atl1c_init_module is the first routine called when the driver is @@ -2715,7 +2701,7 @@ static int __init atl1c_init_module(void) return pci_register_driver(&atl1c_driver); } -/* +/** * atl1c_exit_module - Driver Exit Cleanup Routine * * atl1c_exit_module is called just before the driver is removed diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c index 0aed82e1bb3..a98acc8a956 100644 --- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c +++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c @@ -89,7 +89,7 @@ static const u16 atl1e_pay_load_size[] = { 128, 256, 512, 1024, 2048, 4096, }; -/* +/** * atl1e_irq_enable - Enable default interrupt generation settings * @adapter: board private structure */ @@ -102,7 +102,7 @@ static inline void atl1e_irq_enable(struct atl1e_adapter *adapter) } } -/* +/** * atl1e_irq_disable - Mask off interrupt generation on the NIC * @adapter: board private structure */ @@ -114,7 +114,7 @@ static inline void atl1e_irq_disable(struct atl1e_adapter *adapter) synchronize_irq(adapter->pdev->irq); } -/* +/** * atl1e_irq_reset - reset interrupt confiure on the NIC * @adapter: board private structure */ @@ -126,7 +126,7 @@ static inline void atl1e_irq_reset(struct atl1e_adapter *adapter) AT_WRITE_FLUSH(&adapter->hw); } -/* +/** * atl1e_phy_config - Timer Call-back * @data: pointer to netdev cast into an unsigned long */ @@ -210,7 +210,7 @@ static int atl1e_check_link(struct atl1e_adapter *adapter) return 0; } -/* +/** * atl1e_link_chg_task - deal with link change event Out of interrupt context * @netdev: network interface device structure */ @@ -259,7 +259,7 @@ static void atl1e_cancel_work(struct atl1e_adapter *adapter) cancel_work_sync(&adapter->link_chg_task); } -/* +/** * atl1e_tx_timeout - Respond to a Tx Hang * @netdev: network interface device structure */ @@ -271,7 +271,7 @@ static void atl1e_tx_timeout(struct net_device *netdev) schedule_work(&adapter->reset_task); } -/* +/** * atl1e_set_multi - Multicast and Promiscuous mode set * @netdev: network interface device structure * @@ -345,7 +345,7 @@ static void atl1e_restore_vlan(struct atl1e_adapter *adapter) atl1e_vlan_mode(adapter->netdev, adapter->netdev->features); } -/* +/** * atl1e_set_mac - Change the Ethernet Address of the NIC * @netdev: network interface device structure * @p: pointer to an address structure @@ -397,7 +397,7 @@ static int atl1e_set_features(struct net_device *netdev, return 0; } -/* +/** * atl1e_change_mtu - Change the Maximum Transfer Unit * @netdev: network interface device structure * @new_mtu: new value for maximum frame size @@ -449,12 +449,6 @@ static void atl1e_mdio_write(struct net_device *netdev, int phy_id, atl1e_write_phy_reg(&adapter->hw, reg_num & MDIO_REG_ADDR_MASK, val); } -/* - * atl1e_mii_ioctl - - * @netdev: - * @ifreq: - * @cmd: - */ static int atl1e_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) { @@ -505,12 +499,6 @@ out: } -/* - * atl1e_ioctl - - * @netdev: - * @ifreq: - * @cmd: - */ static int atl1e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) { switch (cmd) { @@ -541,7 +529,7 @@ static void atl1e_setup_pcicmd(struct pci_dev *pdev) msleep(1); } -/* +/** * atl1e_alloc_queues - Allocate memory for all rings * @adapter: board private structure to initialize * @@ -551,7 +539,7 @@ static int __devinit atl1e_alloc_queues(struct atl1e_adapter *adapter) return 0; } -/* +/** * atl1e_sw_init - Initialize general software structures (struct atl1e_adapter) * @adapter: board private structure to initialize * @@ -635,7 +623,7 @@ static int __devinit atl1e_sw_init(struct atl1e_adapter *adapter) return 0; } -/* +/** * atl1e_clean_tx_ring - Free Tx-skb * @adapter: board private structure */ @@ -678,7 +666,7 @@ static void atl1e_clean_tx_ring(struct atl1e_adapter *adapter) ring_count); } -/* +/** * atl1e_clean_rx_ring - Free rx-reservation skbs * @adapter: board private structure */ @@ -761,7 +749,7 @@ static void atl1e_init_ring_ptrs(struct atl1e_adapter *adapter) } } -/* +/** * atl1e_free_ring_resources - Free Tx / RX descriptor Resources * @adapter: board private structure * @@ -786,7 +774,7 @@ static void atl1e_free_ring_resources(struct atl1e_adapter *adapter) } } -/* +/** * atl1e_setup_mem_resources - allocate Tx / RX descriptor resources * @adapter: board private structure * @@ -1075,7 +1063,7 @@ static void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter) AT_WRITE_REG(hw, REG_MAC_CTRL, value); } -/* +/** * atl1e_configure - Configure Transmit&Receive Unit after Reset * @adapter: board private structure * @@ -1145,7 +1133,7 @@ static int atl1e_configure(struct atl1e_adapter *adapter) return 0; } -/* +/** * atl1e_get_stats - Get System Network Statistics * @netdev: network interface device structure * @@ -1257,11 +1245,10 @@ static bool atl1e_clean_tx_irq(struct atl1e_adapter *adapter) return true; } -/* +/** * atl1e_intr - Interrupt Handler * @irq: interrupt number * @data: pointer to a network interface device structure - * @pt_regs: CPU registers structure */ static irqreturn_t atl1e_intr(int irq, void *data) { @@ -1489,9 +1476,8 @@ fatal_err: schedule_work(&adapter->reset_task); } -/* +/** * atl1e_clean - NAPI Rx polling callback - * @adapter: board private structure */ static int atl1e_clean(struct napi_struct *napi, int budget) { @@ -1956,7 +1942,7 @@ void atl1e_down(struct atl1e_adapter *adapter) atl1e_clean_rx_ring(adapter); } -/* +/** * atl1e_open - Called when a network interface is made active * @netdev: network interface device structure * @@ -2002,7 +1988,7 @@ err_req_irq: return err; } -/* +/** * atl1e_close - Disables a network interface * @netdev: network interface device structure * @@ -2238,7 +2224,7 @@ static int atl1e_init_netdev(struct net_device *netdev, struct pci_dev *pdev) return 0; } -/* +/** * atl1e_probe - Device Initialization Routine * @pdev: PCI device information struct * @ent: entry in atl1e_pci_tbl @@ -2392,7 +2378,7 @@ err_dma: return err; } -/* +/** * atl1e_remove - Device Removal Routine * @pdev: PCI device information struct * @@ -2424,7 +2410,7 @@ static void __devexit atl1e_remove(struct pci_dev *pdev) pci_disable_device(pdev); } -/* +/** * atl1e_io_error_detected - called when PCI error is detected * @pdev: Pointer to PCI device * @state: The current pci connection state @@ -2452,7 +2438,7 @@ atl1e_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state) return PCI_ERS_RESULT_NEED_RESET; } -/* +/** * atl1e_io_slot_reset - called after the pci bus has been reset. * @pdev: Pointer to PCI device * @@ -2479,7 +2465,7 @@ static pci_ers_result_t atl1e_io_slot_reset(struct pci_dev *pdev) return PCI_ERS_RESULT_RECOVERED; } -/* +/** * atl1e_io_resume - called when traffic can start flowing again. * @pdev: Pointer to PCI device * @@ -2523,7 +2509,7 @@ static struct pci_driver atl1e_driver = { .err_handler = &atl1e_err_handler }; -/* +/** * atl1e_init_module - Driver Registration Routine * * atl1e_init_module is the first routine called when the driver is @@ -2534,7 +2520,7 @@ static int __init atl1e_init_module(void) return pci_register_driver(&atl1e_driver); } -/* +/** * atl1e_exit_module - Driver Exit Cleanup Routine * * atl1e_exit_module is called just before the driver is removed diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_param.c b/drivers/net/ethernet/atheros/atl1e/atl1e_param.c index 0ce60b6e7ef..b5086f1e637 100644 --- a/drivers/net/ethernet/atheros/atl1e/atl1e_param.c +++ b/drivers/net/ethernet/atheros/atl1e/atl1e_param.c @@ -168,7 +168,7 @@ static int __devinit atl1e_validate_option(int *value, struct atl1e_option *opt, return -1; } -/* +/** * atl1e_check_options - Range Checking for Command Line Parameters * @adapter: board private structure * diff --git a/drivers/net/ethernet/atheros/atlx/atl1.c b/drivers/net/ethernet/atheros/atlx/atl1.c index 149a294d54e..f2402f355ce 100644 --- a/drivers/net/ethernet/atheros/atlx/atl1.c +++ b/drivers/net/ethernet/atheros/atlx/atl1.c @@ -195,7 +195,7 @@ static int __devinit atl1_validate_option(int *value, struct atl1_option *opt, return -1; } -/* +/** * atl1_check_options - Range Checking for Command Line Parameters * @adapter: board private structure * @@ -937,7 +937,7 @@ static void atl1_set_mac_addr(struct atl1_hw *hw) iowrite32(value, (hw->hw_addr + REG_MAC_STA_ADDR) + (1 << 2)); } -/* +/** * atl1_sw_init - Initialize general software structures (struct atl1_adapter) * @adapter: board private structure to initialize * @@ -1014,12 +1014,6 @@ static void mdio_write(struct net_device *netdev, int phy_id, int reg_num, atl1_write_phy_reg(&adapter->hw, reg_num, val); } -/* - * atl1_mii_ioctl - - * @netdev: - * @ifreq: - * @cmd: - */ static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) { struct atl1_adapter *adapter = netdev_priv(netdev); @@ -1036,7 +1030,7 @@ static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) return retval; } -/* +/** * atl1_setup_mem_resources - allocate Tx / RX descriptor resources * @adapter: board private structure * @@ -1147,7 +1141,7 @@ static void atl1_init_ring_ptrs(struct atl1_adapter *adapter) atomic_set(&rrd_ring->next_to_clean, 0); } -/* +/** * atl1_clean_rx_ring - Free RFD Buffers * @adapter: board private structure */ @@ -1187,7 +1181,7 @@ static void atl1_clean_rx_ring(struct atl1_adapter *adapter) atomic_set(&rrd_ring->next_to_clean, 0); } -/* +/** * atl1_clean_tx_ring - Free Tx Buffers * @adapter: board private structure */ @@ -1227,7 +1221,7 @@ static void atl1_clean_tx_ring(struct atl1_adapter *adapter) atomic_set(&tpd_ring->next_to_clean, 0); } -/* +/** * atl1_free_ring_resources - Free Tx / RX descriptor Resources * @adapter: board private structure * @@ -1470,7 +1464,7 @@ static void set_flow_ctrl_new(struct atl1_hw *hw) iowrite32(value, hw->hw_addr + REG_RXQ_RRD_PAUSE_THRESH); } -/* +/** * atl1_configure - Configure Transmit&Receive Unit after Reset * @adapter: board private structure * @@ -1844,7 +1838,7 @@ static void atl1_rx_checksum(struct atl1_adapter *adapter, } } -/* +/** * atl1_alloc_rx_buffers - Replace used receive buffers * @adapter: address of board private structure */ @@ -2489,11 +2483,10 @@ static inline int atl1_sched_rings_clean(struct atl1_adapter* adapter) return 1; } -/* +/** * atl1_intr - Interrupt Handler * @irq: interrupt number * @data: pointer to a network interface device structure - * @pt_regs: CPU registers structure */ static irqreturn_t atl1_intr(int irq, void *data) { @@ -2574,7 +2567,7 @@ static irqreturn_t atl1_intr(int irq, void *data) } -/* +/** * atl1_phy_config - Timer Call-back * @data: pointer to netdev cast into an unsigned long */ @@ -2693,7 +2686,7 @@ static void atl1_reset_dev_task(struct work_struct *work) netif_device_attach(netdev); } -/* +/** * atl1_change_mtu - Change the Maximum Transfer Unit * @netdev: network interface device structure * @new_mtu: new value for maximum frame size @@ -2727,7 +2720,7 @@ static int atl1_change_mtu(struct net_device *netdev, int new_mtu) return 0; } -/* +/** * atl1_open - Called when a network interface is made active * @netdev: network interface device structure * @@ -2762,7 +2755,7 @@ err_up: return err; } -/* +/** * atl1_close - Disables a network interface * @netdev: network interface device structure * @@ -2930,7 +2923,7 @@ static const struct net_device_ops atl1_netdev_ops = { #endif }; -/* +/** * atl1_probe - Device Initialization Routine * @pdev: PCI device information struct * @ent: entry in atl1_pci_tbl @@ -3111,7 +3104,7 @@ err_request_regions: return err; } -/* +/** * atl1_remove - Device Removal Routine * @pdev: PCI device information struct * @@ -3158,7 +3151,7 @@ static struct pci_driver atl1_driver = { .driver.pm = ATL1_PM_OPS, }; -/* +/** * atl1_exit_module - Driver Exit Cleanup Routine * * atl1_exit_module is called just before the driver is removed @@ -3169,7 +3162,7 @@ static void __exit atl1_exit_module(void) pci_unregister_driver(&atl1_driver); } -/* +/** * atl1_init_module - Driver Registration Routine * * atl1_init_module is the first routine called when the driver is diff --git a/drivers/net/ethernet/atheros/atlx/atl2.c b/drivers/net/ethernet/atheros/atlx/atl2.c index 6762dc406b2..7c0b7e2bcb6 100644 --- a/drivers/net/ethernet/atheros/atlx/atl2.c +++ b/drivers/net/ethernet/atheros/atlx/atl2.c @@ -75,7 +75,7 @@ static void atl2_set_ethtool_ops(struct net_device *netdev); static void atl2_check_options(struct atl2_adapter *adapter); -/* +/** * atl2_sw_init - Initialize general software structures (struct atl2_adapter) * @adapter: board private structure to initialize * @@ -123,7 +123,7 @@ static int __devinit atl2_sw_init(struct atl2_adapter *adapter) return 0; } -/* +/** * atl2_set_multi - Multicast and Promiscuous mode set * @netdev: network interface device structure * @@ -177,7 +177,7 @@ static void init_ring_ptrs(struct atl2_adapter *adapter) adapter->txs_next_clear = 0; } -/* +/** * atl2_configure - Configure Transmit&Receive Unit after Reset * @adapter: board private structure * @@ -283,7 +283,7 @@ static int atl2_configure(struct atl2_adapter *adapter) return value; } -/* +/** * atl2_setup_ring_resources - allocate Tx / RX descriptor resources * @adapter: board private structure * @@ -340,7 +340,7 @@ static s32 atl2_setup_ring_resources(struct atl2_adapter *adapter) return 0; } -/* +/** * atl2_irq_enable - Enable default interrupt generation settings * @adapter: board private structure */ @@ -350,7 +350,7 @@ static inline void atl2_irq_enable(struct atl2_adapter *adapter) ATL2_WRITE_FLUSH(&adapter->hw); } -/* +/** * atl2_irq_disable - Mask off interrupt generation on the NIC * @adapter: board private structure */ @@ -599,11 +599,10 @@ static inline void atl2_clear_phy_int(struct atl2_adapter *adapter) spin_unlock(&adapter->stats_lock); } -/* +/** * atl2_intr - Interrupt Handler * @irq: interrupt number * @data: pointer to a network interface device structure - * @pt_regs: CPU registers structure */ static irqreturn_t atl2_intr(int irq, void *data) { @@ -679,7 +678,7 @@ static int atl2_request_irq(struct atl2_adapter *adapter) netdev); } -/* +/** * atl2_free_ring_resources - Free Tx / RX descriptor Resources * @adapter: board private structure * @@ -692,7 +691,7 @@ static void atl2_free_ring_resources(struct atl2_adapter *adapter) adapter->ring_dma); } -/* +/** * atl2_open - Called when a network interface is made active * @netdev: network interface device structure * @@ -798,7 +797,7 @@ static void atl2_free_irq(struct atl2_adapter *adapter) #endif } -/* +/** * atl2_close - Disables a network interface * @netdev: network interface device structure * @@ -918,7 +917,7 @@ static netdev_tx_t atl2_xmit_frame(struct sk_buff *skb, return NETDEV_TX_OK; } -/* +/** * atl2_change_mtu - Change the Maximum Transfer Unit * @netdev: network interface device structure * @new_mtu: new value for maximum frame size @@ -943,7 +942,7 @@ static int atl2_change_mtu(struct net_device *netdev, int new_mtu) return 0; } -/* +/** * atl2_set_mac - Change the Ethernet Address of the NIC * @netdev: network interface device structure * @p: pointer to an address structure @@ -969,12 +968,6 @@ static int atl2_set_mac(struct net_device *netdev, void *p) return 0; } -/* - * atl2_mii_ioctl - - * @netdev: - * @ifreq: - * @cmd: - */ static int atl2_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) { struct atl2_adapter *adapter = netdev_priv(netdev); @@ -1011,12 +1004,6 @@ static int atl2_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) return 0; } -/* - * atl2_ioctl - - * @netdev: - * @ifreq: - * @cmd: - */ static int atl2_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) { switch (cmd) { @@ -1033,7 +1020,7 @@ static int atl2_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) } } -/* +/** * atl2_tx_timeout - Respond to a Tx Hang * @netdev: network interface device structure */ @@ -1045,7 +1032,7 @@ static void atl2_tx_timeout(struct net_device *netdev) schedule_work(&adapter->reset_task); } -/* +/** * atl2_watchdog - Timer Call-back * @data: pointer to netdev cast into an unsigned long */ @@ -1070,7 +1057,7 @@ static void atl2_watchdog(unsigned long data) } } -/* +/** * atl2_phy_config - Timer Call-back * @data: pointer to netdev cast into an unsigned long */ @@ -1274,9 +1261,8 @@ static int atl2_check_link(struct atl2_adapter *adapter) return 0; } -/* +/** * atl2_link_chg_task - deal with link change event Out of interrupt context - * @netdev: network interface device structure */ static void atl2_link_chg_task(struct work_struct *work) { @@ -1341,7 +1327,7 @@ static const struct net_device_ops atl2_netdev_ops = { #endif }; -/* +/** * atl2_probe - Device Initialization Routine * @pdev: PCI device information struct * @ent: entry in atl2_pci_tbl @@ -1501,7 +1487,7 @@ err_dma: return err; } -/* +/** * atl2_remove - Device Removal Routine * @pdev: PCI device information struct * @@ -1728,7 +1714,7 @@ static struct pci_driver atl2_driver = { .shutdown = atl2_shutdown, }; -/* +/** * atl2_init_module - Driver Registration Routine * * atl2_init_module is the first routine called when the driver is @@ -1743,7 +1729,7 @@ static int __init atl2_init_module(void) } module_init(atl2_init_module); -/* +/** * atl2_exit_module - Driver Exit Cleanup Routine * * atl2_exit_module is called just before the driver is removed @@ -2997,7 +2983,7 @@ static int __devinit atl2_validate_option(int *value, struct atl2_option *opt) return -1; } -/* +/** * atl2_check_options - Range Checking for Command Line Parameters * @adapter: board private structure * diff --git a/drivers/net/ethernet/atheros/atlx/atlx.c b/drivers/net/ethernet/atheros/atlx/atlx.c index b4f3aa49a7f..77ffbc4a507 100644 --- a/drivers/net/ethernet/atheros/atlx/atlx.c +++ b/drivers/net/ethernet/atheros/atlx/atlx.c @@ -64,7 +64,7 @@ static int atlx_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) } } -/* +/** * atlx_set_mac - Change the Ethernet Address of the NIC * @netdev: network interface device structure * @p: pointer to an address structure @@ -115,7 +115,7 @@ static void atlx_check_for_link(struct atlx_adapter *adapter) schedule_work(&adapter->link_chg_task); } -/* +/** * atlx_set_multi - Multicast and Promiscuous mode set * @netdev: network interface device structure * @@ -162,7 +162,7 @@ static inline void atlx_imr_set(struct atlx_adapter *adapter, ioread32(adapter->hw.hw_addr + REG_IMR); } -/* +/** * atlx_irq_enable - Enable default interrupt generation settings * @adapter: board private structure */ @@ -172,7 +172,7 @@ static void atlx_irq_enable(struct atlx_adapter *adapter) adapter->int_enabled = true; } -/* +/** * atlx_irq_disable - Mask off interrupt generation on the NIC * @adapter: board private structure */ @@ -193,7 +193,7 @@ static void atlx_clear_phy_int(struct atlx_adapter *adapter) spin_unlock_irqrestore(&adapter->lock, flags); } -/* +/** * atlx_tx_timeout - Respond to a Tx Hang * @netdev: network interface device structure */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index 53659f321d5..dfa757e7429 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -90,7 +90,7 @@ void bnx2x_send_unload_done(struct bnx2x *bp); * bnx2x_config_rss_pf - configure RSS parameters in a PF. * * @bp: driver handle - * @rss_obj RSS object to use + * @rss_obj: RSS object to use * @ind_table: indirection table to configure * @config_hash: re-configure RSS hash keys configuration */ diff --git a/drivers/net/ethernet/brocade/bna/bfa_cee.c b/drivers/net/ethernet/brocade/bna/bfa_cee.c index 689e5e19cc0..8532a815902 100644 --- a/drivers/net/ethernet/brocade/bna/bfa_cee.c +++ b/drivers/net/ethernet/brocade/bna/bfa_cee.c @@ -52,13 +52,7 @@ bfa_cee_format_lldp_cfg(struct bfa_cee_lldp_cfg *lldp_cfg) } /** - * bfa_cee_attr_meminfo() - * - * @brief Returns the size of the DMA memory needed by CEE attributes - * - * @param[in] void - * - * @return Size of DMA region + * bfa_cee_attr_meminfo - Returns the size of the DMA memory needed by CEE attributes */ static u32 bfa_cee_attr_meminfo(void) @@ -66,13 +60,7 @@ bfa_cee_attr_meminfo(void) return roundup(sizeof(struct bfa_cee_attr), BFA_DMA_ALIGN_SZ); } /** - * bfa_cee_stats_meminfo() - * - * @brief Returns the size of the DMA memory needed by CEE stats - * - * @param[in] void - * - * @return Size of DMA region + * bfa_cee_stats_meminfo - Returns the size of the DMA memory needed by CEE stats */ static u32 bfa_cee_stats_meminfo(void) @@ -81,14 +69,10 @@ bfa_cee_stats_meminfo(void) } /** - * bfa_cee_get_attr_isr() + * bfa_cee_get_attr_isr - CEE ISR for get-attributes responses from f/w * - * @brief CEE ISR for get-attributes responses from f/w - * - * @param[in] cee - Pointer to the CEE module - * status - Return status from the f/w - * - * @return void + * @cee: Pointer to the CEE module + * @status: Return status from the f/w */ static void bfa_cee_get_attr_isr(struct bfa_cee *cee, enum bfa_status status) @@ -105,14 +89,10 @@ bfa_cee_get_attr_isr(struct bfa_cee *cee, enum bfa_status status) } /** - * bfa_cee_get_attr_isr() + * bfa_cee_get_attr_isr - CEE ISR for get-stats responses from f/w * - * @brief CEE ISR for get-stats responses from f/w - * - * @param[in] cee - Pointer to the CEE module - * status - Return status from the f/w - * - * @return void + * @cee: Pointer to the CEE module + * @status: Return status from the f/w */ static void bfa_cee_get_stats_isr(struct bfa_cee *cee, enum bfa_status status) diff --git a/drivers/net/ethernet/chelsio/cxgb3/sge.c b/drivers/net/ethernet/chelsio/cxgb3/sge.c index cfb60e1f51d..dd901c5061b 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb3/sge.c @@ -2877,7 +2877,7 @@ static void sge_timer_tx(unsigned long data) mod_timer(&qs->tx_reclaim_timer, jiffies + next_period); } -/* +/** * sge_timer_rx - perform periodic maintenance of an SGE qset * @data: the SGE queue set to maintain * diff --git a/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c index 44ac2f40b64..bff8a3cdd3d 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c @@ -1076,7 +1076,7 @@ static int t3_flash_erase_sectors(struct adapter *adapter, int start, int end) return 0; } -/* +/** * t3_load_fw - download firmware * @adapter: the adapter * @fw_data: the firmware image to write diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index 32e1dd566a1..fa947dfa4c3 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -2010,7 +2010,7 @@ int t4_fwaddrspace_write(struct adapter *adap, unsigned int mbox, return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); } -/* +/** * t4_mem_win_read_len - read memory through PCIE memory window * @adap: the adapter * @addr: address of first byte requested aligned on 32b. diff --git a/drivers/net/ethernet/ethoc.c b/drivers/net/ethernet/ethoc.c index a3816781054..20297881f8e 100644 --- a/drivers/net/ethernet/ethoc.c +++ b/drivers/net/ethernet/ethoc.c @@ -902,7 +902,7 @@ static const struct net_device_ops ethoc_netdev_ops = { }; /** - * ethoc_probe() - initialize OpenCores ethernet MAC + * ethoc_probe - initialize OpenCores ethernet MAC * pdev: platform device */ static int __devinit ethoc_probe(struct platform_device *pdev) @@ -1140,7 +1140,7 @@ out: } /** - * ethoc_remove() - shutdown OpenCores ethernet MAC + * ethoc_remove - shutdown OpenCores ethernet MAC * @pdev: platform device */ static int __devexit ethoc_remove(struct platform_device *pdev) diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index dafd797a606..fffd20528b5 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -1389,8 +1389,8 @@ fec_set_mac_address(struct net_device *ndev, void *p) } #ifdef CONFIG_NET_POLL_CONTROLLER -/* - * fec_poll_controller: FEC Poll controller function +/** + * fec_poll_controller - FEC Poll controller function * @dev: The FEC network adapter * * Polled functionality used by netconsole and others in non interrupt mode diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c index c526279e492..3d683952876 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_hw.c +++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c @@ -399,7 +399,7 @@ void e1000_set_media_type(struct e1000_hw *hw) } /** - * e1000_reset_hw: reset the hardware completely + * e1000_reset_hw - reset the hardware completely * @hw: Struct containing variables accessed by shared code * * Reset the transmit and receive units; mask and clear all interrupts. @@ -546,7 +546,7 @@ s32 e1000_reset_hw(struct e1000_hw *hw) } /** - * e1000_init_hw: Performs basic configuration of the adapter. + * e1000_init_hw - Performs basic configuration of the adapter. * @hw: Struct containing variables accessed by shared code * * Assumes that the controller has previously been reset and is in a @@ -2591,7 +2591,7 @@ s32 e1000_check_for_link(struct e1000_hw *hw) * @hw: Struct containing variables accessed by shared code * @speed: Speed of the connection * @duplex: Duplex setting of the connection - + * * Detects the current speed and duplex settings of the hardware. */ s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex) @@ -2959,7 +2959,7 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, * @hw: Struct containing variables accessed by shared code * @reg_addr: address of the PHY register to write * @data: data to write to the PHY - + * * Writes a value to a PHY register */ s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 phy_data) diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index a166efc2fea..ca477e87eb8 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -2159,7 +2159,7 @@ void e1000e_release_hw_control(struct e1000_adapter *adapter) } /** - * @e1000_alloc_ring - allocate memory for a ring structure + * e1000_alloc_ring_dma - allocate memory for a ring structure **/ static int e1000_alloc_ring_dma(struct e1000_adapter *adapter, struct e1000_ring *ring) diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 01ced68d3aa..60e307548f4 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -5777,6 +5777,7 @@ static void igb_tx_hwtstamp(struct igb_q_vector *q_vector, /** * igb_clean_tx_irq - Reclaim resources after transmit completes * @q_vector: pointer to q_vector containing needed info + * * returns true if ring is completely cleaned **/ static bool igb_clean_tx_irq(struct igb_q_vector *q_vector) diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c index 8ec74b07f94..0696abfe994 100644 --- a/drivers/net/ethernet/intel/igbvf/netdev.c +++ b/drivers/net/ethernet/intel/igbvf/netdev.c @@ -766,6 +766,7 @@ static void igbvf_set_itr(struct igbvf_adapter *adapter) /** * igbvf_clean_tx_irq - Reclaim resources after transmit completes * @adapter: board private structure + * * returns true if ring is completely cleaned **/ static bool igbvf_clean_tx_irq(struct igbvf_ring *tx_ring) diff --git a/drivers/net/ethernet/intel/igbvf/vf.c b/drivers/net/ethernet/intel/igbvf/vf.c index 30a6cc42603..eea0e10ce12 100644 --- a/drivers/net/ethernet/intel/igbvf/vf.c +++ b/drivers/net/ethernet/intel/igbvf/vf.c @@ -283,7 +283,8 @@ static s32 e1000_set_vfta_vf(struct e1000_hw *hw, u16 vid, bool set) return err; } -/** e1000_rlpml_set_vf - Set the maximum receive packet length +/** + * e1000_rlpml_set_vf - Set the maximum receive packet length * @hw: pointer to the HW structure * @max_size: value to assign to max frame size **/ @@ -302,7 +303,7 @@ void e1000_rlpml_set_vf(struct e1000_hw *hw, u16 max_size) * e1000_rar_set_vf - set device MAC address * @hw: pointer to the HW structure * @addr: pointer to the receive address - * @index receive address array register + * @index: receive address array register **/ static void e1000_rar_set_vf(struct e1000_hw *hw, u8 * addr, u32 index) { diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c index 5fce363d810..aab649f8c5f 100644 --- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c +++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c @@ -2276,9 +2276,9 @@ static void ixgb_netpoll(struct net_device *dev) #endif /** - * ixgb_io_error_detected() - called when PCI error is detected - * @pdev pointer to pci device with error - * @state pci channel state after error + * ixgb_io_error_detected - called when PCI error is detected + * @pdev: pointer to pci device with error + * @state: pci channel state after error * * This callback is called by the PCI subsystem whenever * a PCI bus error is detected. diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c index 77ac41feb0f..bb7fde45c05 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c @@ -3132,7 +3132,7 @@ s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed, } /** - * ixgbe_get_wwn_prefix_generic Get alternative WWNN/WWPN prefix from + * ixgbe_get_wwn_prefix_generic - Get alternative WWNN/WWPN prefix from * the EEPROM * @hw: pointer to hardware structure * @wwnn_prefix: the alternative WWNN prefix @@ -3325,6 +3325,7 @@ void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, * ixgbe_calculate_checksum - Calculate checksum for buffer * @buffer: pointer to EEPROM * @length: size of EEPROM to calculate a checksum for + * * Calculates the checksum for some buffer on a specified length. The * checksum calculated is returned. **/ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c index bc07933d67d..0ee4dbf4a75 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c @@ -38,7 +38,7 @@ /** * ixgbe_fcoe_clear_ddp - clear the given ddp context - * @ddp - ptr to the ixgbe_fcoe_ddp + * @ddp: ptr to the ixgbe_fcoe_ddp * * Returns : none * diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c index c377706e81a..f36c3c38dbc 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c @@ -252,7 +252,7 @@ static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter) } /** - * ixgbe_set_sriov_queues: Allocate queues for IOV use + * ixgbe_set_sriov_queues - Allocate queues for IOV use * @adapter: board private structure to initialize * * IOV doesn't actually use anything, so just NAK the @@ -265,7 +265,7 @@ static inline bool ixgbe_set_sriov_queues(struct ixgbe_adapter *adapter) } /** - * ixgbe_set_rss_queues: Allocate queues for RSS + * ixgbe_set_rss_queues - Allocate queues for RSS * @adapter: board private structure to initialize * * This is our "base" multiqueue mode. RSS (Receive Side Scaling) will try @@ -288,7 +288,7 @@ static inline bool ixgbe_set_rss_queues(struct ixgbe_adapter *adapter) } /** - * ixgbe_set_fdir_queues: Allocate queues for Flow Director + * ixgbe_set_fdir_queues - Allocate queues for Flow Director * @adapter: board private structure to initialize * * Flow Director is an advanced Rx filter, attempting to get Rx flows back @@ -323,7 +323,7 @@ static inline bool ixgbe_set_fdir_queues(struct ixgbe_adapter *adapter) #ifdef IXGBE_FCOE /** - * ixgbe_set_fcoe_queues: Allocate queues for Fiber Channel over Ethernet (FCoE) + * ixgbe_set_fcoe_queues - Allocate queues for Fiber Channel over Ethernet (FCoE) * @adapter: board private structure to initialize * * FCoE RX FCRETA can use up to 8 rx queues for up to 8 different exchanges. @@ -410,7 +410,7 @@ static inline bool ixgbe_set_dcb_queues(struct ixgbe_adapter *adapter) #endif /** - * ixgbe_set_num_queues: Allocate queues for device, feature dependent + * ixgbe_set_num_queues - Allocate queues for device, feature dependent * @adapter: board private structure to initialize * * This is the top level queue allocation routine. The order here is very diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 5afbb37a738..9313f5c84fa 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -516,7 +516,7 @@ static void ixgbe_get_hw_control(struct ixgbe_adapter *adapter) ctrl_ext | IXGBE_CTRL_EXT_DRV_LOAD); } -/* +/** * ixgbe_set_ivar - set the IVAR registers, mapping interrupt causes to vectors * @adapter: pointer to adapter struct * @direction: 0 for Rx, 1 for Tx, -1 for other causes @@ -3591,7 +3591,7 @@ static void ixgbe_napi_disable_all(struct ixgbe_adapter *adapter) } #ifdef CONFIG_IXGBE_DCB -/* +/** * ixgbe_configure_dcb - Configure DCB hardware * @adapter: ixgbe adapter struct * @@ -3658,11 +3658,11 @@ static void ixgbe_configure_dcb(struct ixgbe_adapter *adapter) /* Additional bittime to account for IXGBE framing */ #define IXGBE_ETH_FRAMING 20 -/* +/** * ixgbe_hpbthresh - calculate high water mark for flow control * * @adapter: board private structure to calculate for - * @pb - packet buffer to calculate + * @pb: packet buffer to calculate */ static int ixgbe_hpbthresh(struct ixgbe_adapter *adapter, int pb) { @@ -3722,11 +3722,11 @@ static int ixgbe_hpbthresh(struct ixgbe_adapter *adapter, int pb) return marker; } -/* +/** * ixgbe_lpbthresh - calculate low water mark for for flow control * * @adapter: board private structure to calculate for - * @pb - packet buffer to calculate + * @pb: packet buffer to calculate */ static int ixgbe_lpbthresh(struct ixgbe_adapter *adapter) { @@ -5243,7 +5243,7 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter) /** * ixgbe_fdir_reinit_subtask - worker thread to reinit FDIR filter table - * @adapter - pointer to the device adapter structure + * @adapter: pointer to the device adapter structure **/ static void ixgbe_fdir_reinit_subtask(struct ixgbe_adapter *adapter) { @@ -5279,7 +5279,7 @@ static void ixgbe_fdir_reinit_subtask(struct ixgbe_adapter *adapter) /** * ixgbe_check_hang_subtask - check for hung queues and dropped interrupts - * @adapter - pointer to the device adapter structure + * @adapter: pointer to the device adapter structure * * This function serves two purposes. First it strobes the interrupt lines * in order to make certain interrupts are occurring. Secondly it sets the @@ -5327,8 +5327,8 @@ static void ixgbe_check_hang_subtask(struct ixgbe_adapter *adapter) /** * ixgbe_watchdog_update_link - update the link status - * @adapter - pointer to the device adapter structure - * @link_speed - pointer to a u32 to store the link_speed + * @adapter: pointer to the device adapter structure + * @link_speed: pointer to a u32 to store the link_speed **/ static void ixgbe_watchdog_update_link(struct ixgbe_adapter *adapter) { @@ -5371,7 +5371,7 @@ static void ixgbe_watchdog_update_link(struct ixgbe_adapter *adapter) /** * ixgbe_watchdog_link_is_up - update netif_carrier status and * print link up message - * @adapter - pointer to the device adapter structure + * @adapter: pointer to the device adapter structure **/ static void ixgbe_watchdog_link_is_up(struct ixgbe_adapter *adapter) { @@ -5431,7 +5431,7 @@ static void ixgbe_watchdog_link_is_up(struct ixgbe_adapter *adapter) /** * ixgbe_watchdog_link_is_down - update netif_carrier status and * print link down message - * @adapter - pointer to the adapter structure + * @adapter: pointer to the adapter structure **/ static void ixgbe_watchdog_link_is_down(struct ixgbe_adapter *adapter) { @@ -5459,7 +5459,7 @@ static void ixgbe_watchdog_link_is_down(struct ixgbe_adapter *adapter) /** * ixgbe_watchdog_flush_tx - flush queues on link down - * @adapter - pointer to the device adapter structure + * @adapter: pointer to the device adapter structure **/ static void ixgbe_watchdog_flush_tx(struct ixgbe_adapter *adapter) { @@ -5508,7 +5508,7 @@ static void ixgbe_spoof_check(struct ixgbe_adapter *adapter) /** * ixgbe_watchdog_subtask - check and bring link up - * @adapter - pointer to the device adapter structure + * @adapter: pointer to the device adapter structure **/ static void ixgbe_watchdog_subtask(struct ixgbe_adapter *adapter) { @@ -5532,7 +5532,7 @@ static void ixgbe_watchdog_subtask(struct ixgbe_adapter *adapter) /** * ixgbe_sfp_detection_subtask - poll for SFP+ cable - * @adapter - the ixgbe adapter structure + * @adapter: the ixgbe adapter structure **/ static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter) { @@ -5599,7 +5599,7 @@ sfp_out: /** * ixgbe_sfp_link_config_subtask - set up link SFP after module install - * @adapter - the ixgbe adapter structure + * @adapter: the ixgbe adapter structure **/ static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter) { @@ -6586,8 +6586,9 @@ static struct rtnl_link_stats64 *ixgbe_get_stats64(struct net_device *netdev, } #ifdef CONFIG_IXGBE_DCB -/* ixgbe_validate_rtr - verify 802.1Qp to Rx packet buffer mapping is valid. - * #adapter: pointer to ixgbe_adapter +/** + * ixgbe_validate_rtr - verify 802.1Qp to Rx packet buffer mapping is valid. + * @adapter: pointer to ixgbe_adapter * @tc: number of traffic classes currently enabled * * Configure a valid 802.1Qp to Rx packet buffer mapping ie confirm @@ -6622,8 +6623,8 @@ static void ixgbe_validate_rtr(struct ixgbe_adapter *adapter, u8 tc) return; } -/* ixgbe_setup_tc - routine to configure net_device for multiple traffic - * classes. +/** + * ixgbe_setup_tc - configure net_device for multiple traffic classes * * @netdev: net device to configure * @tc: number of traffic classes to enable diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index daddd844691..3456d561714 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -107,7 +107,7 @@ static struct sock_filter ptp_filter[] = { /** * ixgbe_ptp_read - read raw cycle counter (to be used by time counter) - * @cc - the cyclecounter structure + * @cc: the cyclecounter structure * * this function reads the cyclecounter registers and is called by the * cyclecounter structure used to construct a ns counter from the @@ -128,8 +128,8 @@ static cycle_t ixgbe_ptp_read(const struct cyclecounter *cc) /** * ixgbe_ptp_adjfreq - * @ptp - the ptp clock structure - * @ppb - parts per billion adjustment from base + * @ptp: the ptp clock structure + * @ppb: parts per billion adjustment from base * * adjust the frequency of the ptp cycle counter by the * indicated ppb from the base frequency. @@ -175,8 +175,8 @@ static int ixgbe_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb) /** * ixgbe_ptp_adjtime - * @ptp - the ptp clock structure - * @delta - offset to adjust the cycle counter by + * @ptp: the ptp clock structure + * @delta: offset to adjust the cycle counter by * * adjust the timer by resetting the timecounter structure. */ @@ -203,8 +203,8 @@ static int ixgbe_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) /** * ixgbe_ptp_gettime - * @ptp - the ptp clock structure - * @ts - timespec structure to hold the current time value + * @ptp: the ptp clock structure + * @ts: timespec structure to hold the current time value * * read the timecounter and return the correct value on ns, * after converting it into a struct timespec. @@ -229,8 +229,8 @@ static int ixgbe_ptp_gettime(struct ptp_clock_info *ptp, struct timespec *ts) /** * ixgbe_ptp_settime - * @ptp - the ptp clock structure - * @ts - the timespec containing the new time for the cycle counter + * @ptp: the ptp clock structure + * @ts: the timespec containing the new time for the cycle counter * * reset the timecounter to use a new base value instead of the kernel * wall timer value. @@ -256,9 +256,9 @@ static int ixgbe_ptp_settime(struct ptp_clock_info *ptp, /** * ixgbe_ptp_enable - * @ptp - the ptp clock structure - * @rq - the requested feature to change - * @on - whether to enable or disable the feature + * @ptp: the ptp clock structure + * @rq: the requested feature to change + * @on: whether to enable or disable the feature * * enable (or disable) ancillary features of the phc subsystem. * our driver only supports the PPS feature on the X540 @@ -294,8 +294,8 @@ static int ixgbe_ptp_enable(struct ptp_clock_info *ptp, /** * ixgbe_ptp_check_pps_event - * @adapter - the private adapter structure - * @eicr - the interrupt cause register value + * @adapter: the private adapter structure + * @eicr: the interrupt cause register value * * This function is called by the interrupt routine when checking for * interrupts. It will check and handle a pps event. @@ -325,8 +325,8 @@ void ixgbe_ptp_check_pps_event(struct ixgbe_adapter *adapter, u32 eicr) /** * ixgbe_ptp_enable_sdp - * @hw - the hardware private structure - * @shift - the clock shift for calculating nanoseconds + * @hw: the hardware private structure + * @shift: the clock shift for calculating nanoseconds * * this function enables the clock out feature on the sdp0 for the * X540 device. It will create a 1second periodic output that can be @@ -399,7 +399,7 @@ static void ixgbe_ptp_enable_sdp(struct ixgbe_hw *hw, int shift) /** * ixgbe_ptp_disable_sdp - * @hw - the private hardware structure + * @hw: the private hardware structure * * this function disables the auxiliary SDP clock out feature */ @@ -769,7 +769,7 @@ int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, /** * ixgbe_ptp_start_cyclecounter - create the cycle counter from hw - * @adapter - pointer to the adapter structure + * @adapter: pointer to the adapter structure * * this function initializes the timecounter and cyclecounter * structures for use in generated a ns counter from the arbitrary @@ -905,7 +905,7 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter) /** * ixgbe_ptp_init - * @adapter - the ixgbe private adapter structure + * @adapter: the ixgbe private adapter structure * * This function performs the required steps for enabling ptp * support. If ptp support has already been loaded it simply calls the diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c index 2334fce4701..16ddf14e8ba 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c @@ -95,11 +95,11 @@ static ssize_t ixgbe_hwmon_show_maxopthresh(struct device *dev, return sprintf(buf, "%u\n", value); } -/* +/** * ixgbe_add_hwmon_attr - Create hwmon attr table for a hwmon sysfs file. - * @ adapter: pointer to the adapter structure - * @ offset: offset in the eeprom sensor data table - * @ type: type of sensor data to display + * @adapter: pointer to the adapter structure + * @offset: offset in the eeprom sensor data table + * @type: type of sensor data to display * * For each file we want in hwmon's sysfs interface we need a device_attribute * This is included in our hwmon_attr struct that contains the references to diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index f69ec4288b1..0368160286f 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -115,7 +115,7 @@ static inline void ixgbevf_release_rx_desc(struct ixgbe_hw *hw, IXGBE_WRITE_REG(hw, IXGBE_VFRDT(rx_ring->reg_idx), val); } -/* +/** * ixgbevf_set_ivar - set IVAR registers - maps interrupt causes to vectors * @adapter: pointer to adapter struct * @direction: 0 for Rx, 1 for Tx, -1 for other causes @@ -1942,8 +1942,8 @@ static void ixgbevf_acquire_msix_vectors(struct ixgbevf_adapter *adapter, } } -/* - * ixgbevf_set_num_queues: Allocate queues for device, feature dependent +/** + * ixgbevf_set_num_queues - Allocate queues for device, feature dependent * @adapter: board private structure to initialize * * This is the top level queue allocation routine. The order here is very diff --git a/drivers/net/ethernet/micrel/ks8851_mll.c b/drivers/net/ethernet/micrel/ks8851_mll.c index 875dd5e264e..76bf1598c60 100644 --- a/drivers/net/ethernet/micrel/ks8851_mll.c +++ b/drivers/net/ethernet/micrel/ks8851_mll.c @@ -1103,7 +1103,7 @@ static void ks_set_grpaddr(struct ks_net *ks) } } /* ks_set_grpaddr */ -/* +/** * ks_clear_mcast - clear multicast information * * @ks : The chip information diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c index eaf9ff0262a..24a4c5716cf 100644 --- a/drivers/net/ethernet/micrel/ksz884x.c +++ b/drivers/net/ethernet/micrel/ksz884x.c @@ -3913,7 +3913,7 @@ static void hw_start_rx(struct ksz_hw *hw) hw->rx_stop = 2; } -/* +/** * hw_stop_rx - stop receiving * @hw: The hardware instance. * diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c index e7cd587d8ae..d958c229937 100644 --- a/drivers/net/ethernet/neterion/s2io.c +++ b/drivers/net/ethernet/neterion/s2io.c @@ -3377,7 +3377,7 @@ static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit, } while (cnt < 20); return ret; } -/* +/** * check_pci_device_id - Checks if the device id is supported * @id : device id * Description: Function to check if the pci device id is supported by driver. @@ -5238,7 +5238,7 @@ static u64 do_s2io_read_unicast_mc(struct s2io_nic *sp, int offset) } /** - * s2io_set_mac_addr driver entry point + * s2io_set_mac_addr - driver entry point */ static int s2io_set_mac_addr(struct net_device *dev, void *p) @@ -6088,7 +6088,7 @@ static int s2io_bist_test(struct s2io_nic *sp, uint64_t *data) } /** - * s2io-link_test - verifies the link state of the nic + * s2io_link_test - verifies the link state of the nic * @sp ; private member of the device structure, which is a pointer to the * s2io_nic structure. * @data: variable that returns the result of each of the test conducted by @@ -6116,9 +6116,9 @@ static int s2io_link_test(struct s2io_nic *sp, uint64_t *data) /** * s2io_rldram_test - offline test for access to the RldRam chip on the NIC - * @sp - private member of the device structure, which is a pointer to the + * @sp: private member of the device structure, which is a pointer to the * s2io_nic structure. - * @data - variable that returns the result of each of the test + * @data: variable that returns the result of each of the test * conducted by the driver. * Description: * This is one of the offline test that tests the read and write diff --git a/drivers/net/ethernet/nvidia/forcedeth.c b/drivers/net/ethernet/nvidia/forcedeth.c index 928913c4f3f..c503fbebdf7 100644 --- a/drivers/net/ethernet/nvidia/forcedeth.c +++ b/drivers/net/ethernet/nvidia/forcedeth.c @@ -3218,7 +3218,7 @@ static void nv_force_linkspeed(struct net_device *dev, int speed, int duplex) } /** - * nv_update_linkspeed: Setup the MAC according to the link partner + * nv_update_linkspeed - Setup the MAC according to the link partner * @dev: Network device to be configured * * The function queries the PHY and checks if there is a link partner. diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c index e48f084ad22..5ae03e815ee 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c @@ -60,7 +60,7 @@ static void pch_gbe_plat_get_bus_info(struct pch_gbe_hw *hw) /** * pch_gbe_plat_init_hw - Initialize hardware * @hw: Pointer to the HW structure - * Returns + * Returns: * 0: Successfully * Negative value: Failed-EBUSY */ @@ -108,7 +108,7 @@ static void pch_gbe_plat_init_function_pointers(struct pch_gbe_hw *hw) /** * pch_gbe_hal_setup_init_funcs - Initializes function pointers * @hw: Pointer to the HW structure - * Returns + * Returns: * 0: Successfully * ENOSYS: Function is not registered */ @@ -137,7 +137,7 @@ inline void pch_gbe_hal_get_bus_info(struct pch_gbe_hw *hw) /** * pch_gbe_hal_init_hw - Initialize hardware * @hw: Pointer to the HW structure - * Returns + * Returns: * 0: Successfully * ENOSYS: Function is not registered */ @@ -155,7 +155,7 @@ inline s32 pch_gbe_hal_init_hw(struct pch_gbe_hw *hw) * @hw: Pointer to the HW structure * @offset: The register to read * @data: The buffer to store the 16-bit read. - * Returns + * Returns: * 0: Successfully * Negative value: Failed */ @@ -172,7 +172,7 @@ inline s32 pch_gbe_hal_read_phy_reg(struct pch_gbe_hw *hw, u32 offset, * @hw: Pointer to the HW structure * @offset: The register to read * @data: The value to write. - * Returns + * Returns: * 0: Successfully * Negative value: Failed */ @@ -211,7 +211,7 @@ inline void pch_gbe_hal_phy_sw_reset(struct pch_gbe_hw *hw) /** * pch_gbe_hal_read_mac_addr - Reads MAC address * @hw: Pointer to the HW structure - * Returns + * Returns: * 0: Successfully * ENOSYS: Function is not registered */ diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c index ac4e72d529e..9dbf38c10a6 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c @@ -77,7 +77,7 @@ static const struct pch_gbe_stats pch_gbe_gstrings_stats[] = { * pch_gbe_get_settings - Get device-specific settings * @netdev: Network interface device structure * @ecmd: Ethtool command - * Returns + * Returns: * 0: Successful. * Negative value: Failed. */ @@ -100,7 +100,7 @@ static int pch_gbe_get_settings(struct net_device *netdev, * pch_gbe_set_settings - Set device-specific settings * @netdev: Network interface device structure * @ecmd: Ethtool command - * Returns + * Returns: * 0: Successful. * Negative value: Failed. */ @@ -220,7 +220,7 @@ static void pch_gbe_get_wol(struct net_device *netdev, * pch_gbe_set_wol - Turn Wake-on-Lan on or off * @netdev: Network interface device structure * @wol: Pointer of wake-on-Lan information straucture - * Returns + * Returns: * 0: Successful. * Negative value: Failed. */ @@ -248,7 +248,7 @@ static int pch_gbe_set_wol(struct net_device *netdev, /** * pch_gbe_nway_reset - Restart autonegotiation * @netdev: Network interface device structure - * Returns + * Returns: * 0: Successful. * Negative value: Failed. */ @@ -398,7 +398,7 @@ static void pch_gbe_get_pauseparam(struct net_device *netdev, * pch_gbe_set_pauseparam - Set pause paramters * @netdev: Network interface device structure * @pause: Pause parameters structure - * Returns + * Returns: * 0: Successful. * Negative value: Failed. */ diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c index 3787c64ee71..b1006563f73 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c @@ -301,7 +301,7 @@ inline void pch_gbe_mac_load_mac_addr(struct pch_gbe_hw *hw) /** * pch_gbe_mac_read_mac_addr - Read MAC address * @hw: Pointer to the HW structure - * Returns + * Returns: * 0: Successful. */ s32 pch_gbe_mac_read_mac_addr(struct pch_gbe_hw *hw) @@ -483,7 +483,7 @@ static void pch_gbe_mac_mc_addr_list_update(struct pch_gbe_hw *hw, /** * pch_gbe_mac_force_mac_fc - Force the MAC's flow control settings * @hw: Pointer to the HW structure - * Returns + * Returns: * 0: Successful. * Negative value: Failed. */ @@ -639,7 +639,7 @@ static void pch_gbe_mac_set_pause_packet(struct pch_gbe_hw *hw) /** * pch_gbe_alloc_queues - Allocate memory for all rings * @adapter: Board private structure to initialize - * Returns + * Returns: * 0: Successfully * Negative value: Failed */ @@ -670,7 +670,7 @@ static void pch_gbe_init_stats(struct pch_gbe_adapter *adapter) /** * pch_gbe_init_phy - Initialize PHY * @adapter: Board private structure to initialize - * Returns + * Returns: * 0: Successfully * Negative value: Failed */ @@ -720,7 +720,7 @@ static int pch_gbe_init_phy(struct pch_gbe_adapter *adapter) * @netdev: Network interface device structure * @addr: Phy ID * @reg: Access location - * Returns + * Returns: * 0: Successfully * Negative value: Failed */ @@ -1364,7 +1364,7 @@ static void pch_gbe_start_receive(struct pch_gbe_hw *hw) * pch_gbe_intr - Interrupt Handler * @irq: Interrupt number * @data: Pointer to a network interface device structure - * Returns + * Returns: * - IRQ_HANDLED: Our interrupt * - IRQ_NONE: Not our interrupt */ @@ -1566,7 +1566,7 @@ static void pch_gbe_alloc_tx_buffers(struct pch_gbe_adapter *adapter, * pch_gbe_clean_tx - Reclaim resources after transmit completes * @adapter: Board private structure * @tx_ring: Tx descriptor ring - * Returns + * Returns: * true: Cleaned the descriptor * false: Not cleaned the descriptor */ @@ -1660,7 +1660,7 @@ pch_gbe_clean_tx(struct pch_gbe_adapter *adapter, * @rx_ring: Rx descriptor ring * @work_done: Completed count * @work_to_do: Request count - * Returns + * Returns: * true: Cleaned the descriptor * false: Not cleaned the descriptor */ @@ -1775,7 +1775,7 @@ pch_gbe_clean_rx(struct pch_gbe_adapter *adapter, * pch_gbe_setup_tx_resources - Allocate Tx resources (Descriptors) * @adapter: Board private structure * @tx_ring: Tx descriptor ring (for a specific queue) to setup - * Returns + * Returns: * 0: Successfully * Negative value: Failed */ @@ -1822,7 +1822,7 @@ int pch_gbe_setup_tx_resources(struct pch_gbe_adapter *adapter, * pch_gbe_setup_rx_resources - Allocate Rx resources (Descriptors) * @adapter: Board private structure * @rx_ring: Rx descriptor ring (for a specific queue) to setup - * Returns + * Returns: * 0: Successfully * Negative value: Failed */ @@ -1899,7 +1899,7 @@ void pch_gbe_free_rx_resources(struct pch_gbe_adapter *adapter, /** * pch_gbe_request_irq - Allocate an interrupt line * @adapter: Board private structure - * Returns + * Returns: * 0: Successfully * Negative value: Failed */ @@ -1932,7 +1932,7 @@ static int pch_gbe_request_irq(struct pch_gbe_adapter *adapter) /** * pch_gbe_up - Up GbE network device * @adapter: Board private structure - * Returns + * Returns: * 0: Successfully * Negative value: Failed */ @@ -2018,7 +2018,7 @@ void pch_gbe_down(struct pch_gbe_adapter *adapter) /** * pch_gbe_sw_init - Initialize general software structures (struct pch_gbe_adapter) * @adapter: Board private structure to initialize - * Returns + * Returns: * 0: Successfully * Negative value: Failed */ @@ -2057,7 +2057,7 @@ static int pch_gbe_sw_init(struct pch_gbe_adapter *adapter) /** * pch_gbe_open - Called when a network interface is made active * @netdev: Network interface device structure - * Returns + * Returns: * 0: Successfully * Negative value: Failed */ @@ -2097,7 +2097,7 @@ err_setup_tx: /** * pch_gbe_stop - Disables a network interface * @netdev: Network interface device structure - * Returns + * Returns: * 0: Successfully */ static int pch_gbe_stop(struct net_device *netdev) @@ -2117,7 +2117,7 @@ static int pch_gbe_stop(struct net_device *netdev) * pch_gbe_xmit_frame - Packet transmitting start * @skb: Socket buffer structure * @netdev: Network interface device structure - * Returns + * Returns: * - NETDEV_TX_OK: Normal end * - NETDEV_TX_BUSY: Error end */ @@ -2225,7 +2225,7 @@ static void pch_gbe_set_multi(struct net_device *netdev) * pch_gbe_set_mac - Change the Ethernet Address of the NIC * @netdev: Network interface device structure * @addr: Pointer to an address structure - * Returns + * Returns: * 0: Successfully * -EADDRNOTAVAIL: Failed */ @@ -2256,7 +2256,7 @@ static int pch_gbe_set_mac(struct net_device *netdev, void *addr) * pch_gbe_change_mtu - Change the Maximum Transfer Unit * @netdev: Network interface device structure * @new_mtu: New value for maximum frame size - * Returns + * Returns: * 0: Successfully * -EINVAL: Failed */ @@ -2309,7 +2309,7 @@ static int pch_gbe_change_mtu(struct net_device *netdev, int new_mtu) * pch_gbe_set_features - Reset device after features changed * @netdev: Network interface device structure * @features: New features - * Returns + * Returns: * 0: HW state updated successfully */ static int pch_gbe_set_features(struct net_device *netdev, @@ -2334,7 +2334,7 @@ static int pch_gbe_set_features(struct net_device *netdev, * @netdev: Network interface device structure * @ifr: Pointer to ifr structure * @cmd: Control command - * Returns + * Returns: * 0: Successfully * Negative value: Failed */ @@ -2369,7 +2369,7 @@ static void pch_gbe_tx_timeout(struct net_device *netdev) * pch_gbe_napi_poll - NAPI receive and transfer polling callback * @napi: Pointer of polling device struct * @budget: The maximum number of a packet - * Returns + * Returns: * false: Exit the polling mode * true: Continue the polling mode */ diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c index 29e23bec809..8653c3b81f8 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c @@ -139,7 +139,7 @@ MODULE_PARM_DESC(XsumTX, "Disable or enable Transmit Checksum offload"); /** * pch_gbe_option - Force the MAC's flow control settings * @hw: Pointer to the HW structure - * Returns + * Returns: * 0: Successful. * Negative value: Failed. */ @@ -220,7 +220,7 @@ static const struct pch_gbe_opt_list fc_list[] = { * @value: value * @opt: option * @adapter: Board private structure - * Returns + * Returns: * 0: Successful. * Negative value: Failed. */ diff --git a/drivers/net/ethernet/sfc/net_driver.h b/drivers/net/ethernet/sfc/net_driver.h index 0e575359af1..a1965c07d1e 100644 --- a/drivers/net/ethernet/sfc/net_driver.h +++ b/drivers/net/ethernet/sfc/net_driver.h @@ -527,7 +527,7 @@ struct efx_phy_operations { }; /** - * @enum efx_phy_mode - PHY operating mode flags + * enum efx_phy_mode - PHY operating mode flags * @PHY_MODE_NORMAL: on and should pass traffic * @PHY_MODE_TX_DISABLED: on with TX disabled * @PHY_MODE_LOW_POWER: set to low power through MDIO diff --git a/drivers/net/ethernet/sfc/rx.c b/drivers/net/ethernet/sfc/rx.c index 243e91f3dff..fca61fea38e 100644 --- a/drivers/net/ethernet/sfc/rx.c +++ b/drivers/net/ethernet/sfc/rx.c @@ -336,6 +336,7 @@ static void efx_recycle_rx_buffer(struct efx_channel *channel, /** * efx_fast_push_rx_descriptors - push new RX descriptors quickly * @rx_queue: RX descriptor queue + * * This will aim to fill the RX descriptor queue up to * @rx_queue->@max_fill. If there is insufficient atomic * memory to do so, a slow fill will be scheduled. diff --git a/drivers/net/ethernet/smsc/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c index 8814b2f5d46..8d15f7a74b4 100644 --- a/drivers/net/ethernet/smsc/smc911x.c +++ b/drivers/net/ethernet/smsc/smc911x.c @@ -773,7 +773,7 @@ static int smc911x_phy_fixed(struct net_device *dev) return 1; } -/* +/** * smc911x_phy_reset - reset the phy * @dev: net device * @phy: phy address @@ -819,7 +819,7 @@ static int smc911x_phy_reset(struct net_device *dev, int phy) return reg & PMT_CTRL_PHY_RST_; } -/* +/** * smc911x_phy_powerdown - powerdown phy * @dev: net device * @phy: phy address @@ -837,7 +837,7 @@ static void smc911x_phy_powerdown(struct net_device *dev, int phy) SMC_SET_PHY_BMCR(lp, phy, bmcr); } -/* +/** * smc911x_phy_check_media - check the media status and adjust BMCR * @dev: net device * @init: set true for initialisation diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c index fee44935501..318adc935a5 100644 --- a/drivers/net/ethernet/smsc/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -942,7 +942,7 @@ static int smc_phy_fixed(struct net_device *dev) return 1; } -/* +/** * smc_phy_reset - reset the phy * @dev: net device * @phy: phy address @@ -976,7 +976,7 @@ static int smc_phy_reset(struct net_device *dev, int phy) return bmcr & BMCR_RESET; } -/* +/** * smc_phy_powerdown - powerdown phy * @dev: net device * @@ -1000,7 +1000,7 @@ static void smc_phy_powerdown(struct net_device *dev) smc_phy_write(dev, phy, MII_BMCR, bmcr | BMCR_PDOWN); } -/* +/** * smc_phy_check_media - check the media status and adjust TCR * @dev: net device * @init: set true for initialisation diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c index cf826e6b6aa..13afb8edfad 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c @@ -125,7 +125,7 @@ err_out_req_reg_failed: } /** - * stmmac_dvr_remove + * stmmac_pci_remove * * @pdev: platform device pointer * Description: this function calls the main to free the net resources diff --git a/drivers/net/ethernet/tehuti/tehuti.c b/drivers/net/ethernet/tehuti/tehuti.c index 447a6932cab..6ce9edd95c0 100644 --- a/drivers/net/ethernet/tehuti/tehuti.c +++ b/drivers/net/ethernet/tehuti/tehuti.c @@ -137,14 +137,15 @@ static void print_eth_id(struct net_device *ndev) #define bdx_disable_interrupts(priv) \ do { WRITE_REG(priv, regIMR, 0); } while (0) -/* bdx_fifo_init - * create TX/RX descriptor fifo for host-NIC communication. +/** + * bdx_fifo_init - create TX/RX descriptor fifo for host-NIC communication. + * @priv: NIC private structure + * @f: fifo to initialize + * @fsz_type: fifo size type: 0-4KB, 1-8KB, 2-16KB, 3-32KB + * @reg_XXX: offsets of registers relative to base address + * * 1K extra space is allocated at the end of the fifo to simplify * processing of descriptors that wraps around fifo's end - * @priv - NIC private structure - * @f - fifo to initialize - * @fsz_type - fifo size type: 0-4KB, 1-8KB, 2-16KB, 3-32KB - * @reg_XXX - offsets of registers relative to base address * * Returns 0 on success, negative value on failure * @@ -177,9 +178,10 @@ bdx_fifo_init(struct bdx_priv *priv, struct fifo *f, int fsz_type, RET(0); } -/* bdx_fifo_free - free all resources used by fifo - * @priv - NIC private structure - * @f - fifo to release +/** + * bdx_fifo_free - free all resources used by fifo + * @priv: NIC private structure + * @f: fifo to release */ static void bdx_fifo_free(struct bdx_priv *priv, struct fifo *f) { @@ -192,9 +194,9 @@ static void bdx_fifo_free(struct bdx_priv *priv, struct fifo *f) RET(); } -/* +/** * bdx_link_changed - notifies OS about hw link state. - * @bdx_priv - hw adapter structure + * @priv: hw adapter structure */ static void bdx_link_changed(struct bdx_priv *priv) { @@ -233,10 +235,10 @@ static void bdx_isr_extra(struct bdx_priv *priv, u32 isr) } -/* bdx_isr - Interrupt Service Routine for Bordeaux NIC - * @irq - interrupt number - * @ndev - network device - * @regs - CPU registers +/** + * bdx_isr_napi - Interrupt Service Routine for Bordeaux NIC + * @irq: interrupt number + * @dev: network device * * Return IRQ_NONE if it was not our interrupt, IRQ_HANDLED - otherwise * @@ -307,8 +309,10 @@ static int bdx_poll(struct napi_struct *napi, int budget) return work_done; } -/* bdx_fw_load - loads firmware to NIC - * @priv - NIC private structure +/** + * bdx_fw_load - loads firmware to NIC + * @priv: NIC private structure + * * Firmware is loaded via TXD fifo, so it must be initialized first. * Firware must be loaded once per NIC not per PCI device provided by NIC (NIC * can have few of them). So all drivers use semaphore register to choose one @@ -380,8 +384,9 @@ static void bdx_restore_mac(struct net_device *ndev, struct bdx_priv *priv) RET(); } -/* bdx_hw_start - inits registers and starts HW's Rx and Tx engines - * @priv - NIC private structure +/** + * bdx_hw_start - inits registers and starts HW's Rx and Tx engines + * @priv: NIC private structure */ static int bdx_hw_start(struct bdx_priv *priv) { @@ -691,12 +696,13 @@ static int bdx_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd) RET(-EOPNOTSUPP); } -/* +/** * __bdx_vlan_rx_vid - private helper for adding/killing VLAN vid - * by passing VLAN filter table to hardware - * @ndev network device - * @vid VLAN vid - * @op add or kill operation + * @ndev: network device + * @vid: VLAN vid + * @op: add or kill operation + * + * Passes VLAN filter table to hardware */ static void __bdx_vlan_rx_vid(struct net_device *ndev, uint16_t vid, int enable) { @@ -722,10 +728,10 @@ static void __bdx_vlan_rx_vid(struct net_device *ndev, uint16_t vid, int enable) RET(); } -/* +/** * bdx_vlan_rx_add_vid - kernel hook for adding VLAN vid to hw filtering table - * @ndev network device - * @vid VLAN vid to add + * @ndev: network device + * @vid: VLAN vid to add */ static int bdx_vlan_rx_add_vid(struct net_device *ndev, uint16_t vid) { @@ -733,10 +739,10 @@ static int bdx_vlan_rx_add_vid(struct net_device *ndev, uint16_t vid) return 0; } -/* +/** * bdx_vlan_rx_kill_vid - kernel hook for killing VLAN vid in hw filtering table - * @ndev network device - * @vid VLAN vid to kill + * @ndev: network device + * @vid: VLAN vid to kill */ static int bdx_vlan_rx_kill_vid(struct net_device *ndev, unsigned short vid) { @@ -974,8 +980,9 @@ static inline void bdx_rxdb_free_elem(struct rxdb *db, int n) * Rx Init * *************************************************************************/ -/* bdx_rx_init - initialize RX all related HW and SW resources - * @priv - NIC private structure +/** + * bdx_rx_init - initialize RX all related HW and SW resources + * @priv: NIC private structure * * Returns 0 on success, negative value on failure * @@ -1016,9 +1023,10 @@ err_mem: return -ENOMEM; } -/* bdx_rx_free_skbs - frees and unmaps all skbs allocated for the fifo - * @priv - NIC private structure - * @f - RXF fifo +/** + * bdx_rx_free_skbs - frees and unmaps all skbs allocated for the fifo + * @priv: NIC private structure + * @f: RXF fifo */ static void bdx_rx_free_skbs(struct bdx_priv *priv, struct rxf_fifo *f) { @@ -1045,8 +1053,10 @@ static void bdx_rx_free_skbs(struct bdx_priv *priv, struct rxf_fifo *f) } } -/* bdx_rx_free - release all Rx resources - * @priv - NIC private structure +/** + * bdx_rx_free - release all Rx resources + * @priv: NIC private structure + * * It assumes that Rx is desabled in HW */ static void bdx_rx_free(struct bdx_priv *priv) @@ -1067,9 +1077,11 @@ static void bdx_rx_free(struct bdx_priv *priv) * Rx Engine * *************************************************************************/ -/* bdx_rx_alloc_skbs - fill rxf fifo with new skbs - * @priv - nic's private structure - * @f - RXF fifo that needs skbs +/** + * bdx_rx_alloc_skbs - fill rxf fifo with new skbs + * @priv: nic's private structure + * @f: RXF fifo that needs skbs + * * It allocates skbs, build rxf descs and push it (rxf descr) into rxf fifo. * skb's virtual and physical addresses are stored in skb db. * To calculate free space, func uses cached values of RPTR and WPTR @@ -1179,13 +1191,15 @@ static void bdx_recycle_skb(struct bdx_priv *priv, struct rxd_desc *rxdd) RET(); } -/* bdx_rx_receive - receives full packets from RXD fifo and pass them to OS +/** + * bdx_rx_receive - receives full packets from RXD fifo and pass them to OS * NOTE: a special treatment is given to non-continuous descriptors * that start near the end, wraps around and continue at the beginning. a second * part is copied right after the first, and then descriptor is interpreted as * normal. fifo has an extra space to allow such operations - * @priv - nic's private structure - * @f - RXF fifo that needs skbs + * @priv: nic's private structure + * @f: RXF fifo that needs skbs + * @budget: maximum number of packets to receive */ /* TBD: replace memcpy func call by explicite inline asm */ @@ -1375,9 +1389,10 @@ static inline int bdx_tx_db_size(struct txdb *db) return db->size - taken; } -/* __bdx_tx_ptr_next - helper function, increment read/write pointer + wrap - * @d - tx data base - * @ptr - read or write pointer +/** + * __bdx_tx_db_ptr_next - helper function, increment read/write pointer + wrap + * @db: tx data base + * @pptr: read or write pointer */ static inline void __bdx_tx_db_ptr_next(struct txdb *db, struct tx_map **pptr) { @@ -1394,8 +1409,9 @@ static inline void __bdx_tx_db_ptr_next(struct txdb *db, struct tx_map **pptr) *pptr = db->start; } -/* bdx_tx_db_inc_rptr - increment read pointer - * @d - tx data base +/** + * bdx_tx_db_inc_rptr - increment read pointer + * @db: tx data base */ static inline void bdx_tx_db_inc_rptr(struct txdb *db) { @@ -1403,8 +1419,9 @@ static inline void bdx_tx_db_inc_rptr(struct txdb *db) __bdx_tx_db_ptr_next(db, &db->rptr); } -/* bdx_tx_db_inc_rptr - increment write pointer - * @d - tx data base +/** + * bdx_tx_db_inc_wptr - increment write pointer + * @db: tx data base */ static inline void bdx_tx_db_inc_wptr(struct txdb *db) { @@ -1413,9 +1430,11 @@ static inline void bdx_tx_db_inc_wptr(struct txdb *db) a result of write */ } -/* bdx_tx_db_init - creates and initializes tx db - * @d - tx data base - * @sz_type - size of tx fifo +/** + * bdx_tx_db_init - creates and initializes tx db + * @d: tx data base + * @sz_type: size of tx fifo + * * Returns 0 on success, error code otherwise */ static int bdx_tx_db_init(struct txdb *d, int sz_type) @@ -1441,8 +1460,9 @@ static int bdx_tx_db_init(struct txdb *d, int sz_type) return 0; } -/* bdx_tx_db_close - closes tx db and frees all memory - * @d - tx data base +/** + * bdx_tx_db_close - closes tx db and frees all memory + * @d: tx data base */ static void bdx_tx_db_close(struct txdb *d) { @@ -1463,9 +1483,11 @@ static struct { u16 qwords; /* qword = 64 bit */ } txd_sizes[MAX_SKB_FRAGS + 1]; -/* txdb_map_skb - creates and stores dma mappings for skb's data blocks - * @priv - NIC private structure - * @skb - socket buffer to map +/** + * bdx_tx_map_skb - creates and stores dma mappings for skb's data blocks + * @priv: NIC private structure + * @skb: socket buffer to map + * @txdd: TX descriptor to use * * It makes dma mappings for skb's data blocks and writes them to PBL of * new tx descriptor. It also stores them in the tx db, so they could be @@ -1562,9 +1584,10 @@ err_mem: return -ENOMEM; } -/* +/** * bdx_tx_space - calculates available space in TX fifo - * @priv - NIC private structure + * @priv: NIC private structure + * * Returns available space in TX fifo in bytes */ static inline int bdx_tx_space(struct bdx_priv *priv) @@ -1579,9 +1602,10 @@ static inline int bdx_tx_space(struct bdx_priv *priv) return fsize; } -/* bdx_tx_transmit - send packet to NIC - * @skb - packet to send - * ndev - network device assigned to NIC +/** + * bdx_tx_transmit - send packet to NIC + * @skb: packet to send + * @ndev: network device assigned to NIC * Return codes: * o NETDEV_TX_OK everything ok. * o NETDEV_TX_BUSY Cannot transmit packet, try later @@ -1699,8 +1723,10 @@ static netdev_tx_t bdx_tx_transmit(struct sk_buff *skb, return NETDEV_TX_OK; } -/* bdx_tx_cleanup - clean TXF fifo, run in the context of IRQ. - * @priv - bdx adapter +/** + * bdx_tx_cleanup - clean TXF fifo, run in the context of IRQ. + * @priv: bdx adapter + * * It scans TXF fifo for descriptors, frees DMA mappings and reports to OS * that those packets were sent */ @@ -1761,7 +1787,8 @@ static void bdx_tx_cleanup(struct bdx_priv *priv) spin_unlock(&priv->tx_lock); } -/* bdx_tx_free_skbs - frees all skbs from TXD fifo. +/** + * bdx_tx_free_skbs - frees all skbs from TXD fifo. * It gets called when OS stops this dev, eg upon "ifconfig down" or rmmod */ static void bdx_tx_free_skbs(struct bdx_priv *priv) @@ -1790,10 +1817,11 @@ static void bdx_tx_free(struct bdx_priv *priv) bdx_tx_db_close(&priv->txdb); } -/* bdx_tx_push_desc - push descriptor to TxD fifo - * @priv - NIC private structure - * @data - desc's data - * @size - desc's size +/** + * bdx_tx_push_desc - push descriptor to TxD fifo + * @priv: NIC private structure + * @data: desc's data + * @size: desc's size * * Pushes desc to TxD fifo and overlaps it if needed. * NOTE: this func does not check for available space. this is responsibility @@ -1819,10 +1847,11 @@ static void bdx_tx_push_desc(struct bdx_priv *priv, void *data, int size) WRITE_REG(priv, f->m.reg_WPTR, f->m.wptr & TXF_WPTR_WR_PTR); } -/* bdx_tx_push_desc_safe - push descriptor to TxD fifo in a safe way - * @priv - NIC private structure - * @data - desc's data - * @size - desc's size +/** + * bdx_tx_push_desc_safe - push descriptor to TxD fifo in a safe way + * @priv: NIC private structure + * @data: desc's data + * @size: desc's size * * NOTE: this func does check for available space and, if necessary, waits for * NIC to read existing data before writing new one. diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index 4da93a5d7ec..9cdd6197a17 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -375,7 +375,7 @@ static char *emac_rxhost_errcodes[16] = { #define emac_ctrl_write(reg, val) iowrite32(val, (priv->ctrl_base + (reg))) /** - * emac_dump_regs: Dump important EMAC registers to debug terminal + * emac_dump_regs - Dump important EMAC registers to debug terminal * @priv: The DaVinci EMAC private adapter structure * * Executes ethtool set cmd & sets phy mode @@ -466,7 +466,7 @@ static void emac_dump_regs(struct emac_priv *priv) } /** - * emac_get_drvinfo: Get EMAC driver information + * emac_get_drvinfo - Get EMAC driver information * @ndev: The DaVinci EMAC network adapter * @info: ethtool info structure containing name and version * @@ -481,7 +481,7 @@ static void emac_get_drvinfo(struct net_device *ndev, } /** - * emac_get_settings: Get EMAC settings + * emac_get_settings - Get EMAC settings * @ndev: The DaVinci EMAC network adapter * @ecmd: ethtool command * @@ -500,7 +500,7 @@ static int emac_get_settings(struct net_device *ndev, } /** - * emac_set_settings: Set EMAC settings + * emac_set_settings - Set EMAC settings * @ndev: The DaVinci EMAC network adapter * @ecmd: ethtool command * @@ -518,7 +518,7 @@ static int emac_set_settings(struct net_device *ndev, struct ethtool_cmd *ecmd) } /** - * emac_get_coalesce : Get interrupt coalesce settings for this device + * emac_get_coalesce - Get interrupt coalesce settings for this device * @ndev : The DaVinci EMAC network adapter * @coal : ethtool coalesce settings structure * @@ -536,7 +536,7 @@ static int emac_get_coalesce(struct net_device *ndev, } /** - * emac_set_coalesce : Set interrupt coalesce settings for this device + * emac_set_coalesce - Set interrupt coalesce settings for this device * @ndev : The DaVinci EMAC network adapter * @coal : ethtool coalesce settings structure * @@ -631,7 +631,7 @@ static const struct ethtool_ops ethtool_ops = { }; /** - * emac_update_phystatus: Update Phy status + * emac_update_phystatus - Update Phy status * @priv: The DaVinci EMAC private adapter structure * * Updates phy status and takes action for network queue if required @@ -697,7 +697,7 @@ static void emac_update_phystatus(struct emac_priv *priv) } /** - * hash_get: Calculate hash value from mac address + * hash_get - Calculate hash value from mac address * @addr: mac address to delete from hash table * * Calculates hash value from mac address @@ -723,9 +723,9 @@ static u32 hash_get(u8 *addr) } /** - * hash_add: Hash function to add mac addr from hash table + * hash_add - Hash function to add mac addr from hash table * @priv: The DaVinci EMAC private adapter structure - * mac_addr: mac address to delete from hash table + * @mac_addr: mac address to delete from hash table * * Adds mac address to the internal hash table * @@ -765,9 +765,9 @@ static int hash_add(struct emac_priv *priv, u8 *mac_addr) } /** - * hash_del: Hash function to delete mac addr from hash table + * hash_del - Hash function to delete mac addr from hash table * @priv: The DaVinci EMAC private adapter structure - * mac_addr: mac address to delete from hash table + * @mac_addr: mac address to delete from hash table * * Removes mac address from the internal hash table * @@ -807,7 +807,7 @@ static int hash_del(struct emac_priv *priv, u8 *mac_addr) #define EMAC_ALL_MULTI_CLR 3 /** - * emac_add_mcast: Set multicast address in the EMAC adapter (Internal) + * emac_add_mcast - Set multicast address in the EMAC adapter (Internal) * @priv: The DaVinci EMAC private adapter structure * @action: multicast operation to perform * mac_addr: mac address to set @@ -855,7 +855,7 @@ static void emac_add_mcast(struct emac_priv *priv, u32 action, u8 *mac_addr) } /** - * emac_dev_mcast_set: Set multicast address in the EMAC adapter + * emac_dev_mcast_set - Set multicast address in the EMAC adapter * @ndev: The DaVinci EMAC network adapter * * Set multicast addresses in EMAC adapter @@ -901,7 +901,7 @@ static void emac_dev_mcast_set(struct net_device *ndev) *************************************************************************/ /** - * emac_int_disable: Disable EMAC module interrupt (from adapter) + * emac_int_disable - Disable EMAC module interrupt (from adapter) * @priv: The DaVinci EMAC private adapter structure * * Disable EMAC interrupt on the adapter @@ -931,7 +931,7 @@ static void emac_int_disable(struct emac_priv *priv) } /** - * emac_int_enable: Enable EMAC module interrupt (from adapter) + * emac_int_enable - Enable EMAC module interrupt (from adapter) * @priv: The DaVinci EMAC private adapter structure * * Enable EMAC interrupt on the adapter @@ -967,7 +967,7 @@ static void emac_int_enable(struct emac_priv *priv) } /** - * emac_irq: EMAC interrupt handler + * emac_irq - EMAC interrupt handler * @irq: interrupt number * @dev_id: EMAC network adapter data structure ptr * @@ -1060,7 +1060,7 @@ static void emac_tx_handler(void *token, int len, int status) } /** - * emac_dev_xmit: EMAC Transmit function + * emac_dev_xmit - EMAC Transmit function * @skb: SKB pointer * @ndev: The DaVinci EMAC network adapter * @@ -1111,7 +1111,7 @@ fail_tx: } /** - * emac_dev_tx_timeout: EMAC Transmit timeout function + * emac_dev_tx_timeout - EMAC Transmit timeout function * @ndev: The DaVinci EMAC network adapter * * Called when system detects that a skb timeout period has expired @@ -1138,7 +1138,7 @@ static void emac_dev_tx_timeout(struct net_device *ndev) } /** - * emac_set_type0addr: Set EMAC Type0 mac address + * emac_set_type0addr - Set EMAC Type0 mac address * @priv: The DaVinci EMAC private adapter structure * @ch: RX channel number * @mac_addr: MAC address to set in device @@ -1165,7 +1165,7 @@ static void emac_set_type0addr(struct emac_priv *priv, u32 ch, char *mac_addr) } /** - * emac_set_type1addr: Set EMAC Type1 mac address + * emac_set_type1addr - Set EMAC Type1 mac address * @priv: The DaVinci EMAC private adapter structure * @ch: RX channel number * @mac_addr: MAC address to set in device @@ -1187,7 +1187,7 @@ static void emac_set_type1addr(struct emac_priv *priv, u32 ch, char *mac_addr) } /** - * emac_set_type2addr: Set EMAC Type2 mac address + * emac_set_type2addr - Set EMAC Type2 mac address * @priv: The DaVinci EMAC private adapter structure * @ch: RX channel number * @mac_addr: MAC address to set in device @@ -1213,7 +1213,7 @@ static void emac_set_type2addr(struct emac_priv *priv, u32 ch, } /** - * emac_setmac: Set mac address in the adapter (internal function) + * emac_setmac - Set mac address in the adapter (internal function) * @priv: The DaVinci EMAC private adapter structure * @ch: RX channel number * @mac_addr: MAC address to set in device @@ -1242,7 +1242,7 @@ static void emac_setmac(struct emac_priv *priv, u32 ch, char *mac_addr) } /** - * emac_dev_setmac_addr: Set mac address in the adapter + * emac_dev_setmac_addr - Set mac address in the adapter * @ndev: The DaVinci EMAC network adapter * @addr: MAC address to set in device * @@ -1277,7 +1277,7 @@ static int emac_dev_setmac_addr(struct net_device *ndev, void *addr) } /** - * emac_hw_enable: Enable EMAC hardware for packet transmission/reception + * emac_hw_enable - Enable EMAC hardware for packet transmission/reception * @priv: The DaVinci EMAC private adapter structure * * Enables EMAC hardware for packet processing - enables PHY, enables RX @@ -1347,7 +1347,7 @@ static int emac_hw_enable(struct emac_priv *priv) } /** - * emac_poll: EMAC NAPI Poll function + * emac_poll - EMAC NAPI Poll function * @ndev: The DaVinci EMAC network adapter * @budget: Number of receive packets to process (as told by NAPI layer) * @@ -1430,7 +1430,7 @@ static int emac_poll(struct napi_struct *napi, int budget) #ifdef CONFIG_NET_POLL_CONTROLLER /** - * emac_poll_controller: EMAC Poll controller function + * emac_poll_controller - EMAC Poll controller function * @ndev: The DaVinci EMAC network adapter * * Polled functionality used by netconsole and others in non interrupt mode @@ -1489,7 +1489,7 @@ static void emac_adjust_link(struct net_device *ndev) *************************************************************************/ /** - * emac_devioctl: EMAC adapter ioctl + * emac_devioctl - EMAC adapter ioctl * @ndev: The DaVinci EMAC network adapter * @ifrq: request parameter * @cmd: command parameter @@ -1516,7 +1516,7 @@ static int match_first_device(struct device *dev, void *data) } /** - * emac_dev_open: EMAC device open + * emac_dev_open - EMAC device open * @ndev: The DaVinci EMAC network adapter * * Called when system wants to start the interface. We init TX/RX channels @@ -1649,7 +1649,7 @@ rollback: } /** - * emac_dev_stop: EMAC device stop + * emac_dev_stop - EMAC device stop * @ndev: The DaVinci EMAC network adapter * * Called when system wants to stop or down the interface. We stop the network @@ -1691,7 +1691,7 @@ static int emac_dev_stop(struct net_device *ndev) } /** - * emac_dev_getnetstats: EMAC get statistics function + * emac_dev_getnetstats - EMAC get statistics function * @ndev: The DaVinci EMAC network adapter * * Called when system wants to get statistics from the device. @@ -1763,7 +1763,7 @@ static const struct net_device_ops emac_netdev_ops = { }; /** - * davinci_emac_probe: EMAC device probe + * davinci_emac_probe - EMAC device probe * @pdev: The DaVinci EMAC device that we are removing * * Called when probing for emac devicesr. We get details of instances and @@ -1949,7 +1949,7 @@ free_clk: } /** - * davinci_emac_remove: EMAC device remove + * davinci_emac_remove - EMAC device remove * @pdev: The DaVinci EMAC device that we are removing * * Called when removing the device driver. We disable clock usage and release @@ -2029,7 +2029,7 @@ static struct platform_driver davinci_emac_driver = { }; /** - * davinci_emac_init: EMAC driver module init + * davinci_emac_init - EMAC driver module init * * Called when initializing the driver. We register the driver with * the platform. @@ -2041,7 +2041,7 @@ static int __init davinci_emac_init(void) late_initcall(davinci_emac_init); /** - * davinci_emac_exit: EMAC driver module exit + * davinci_emac_exit - EMAC driver module exit * * Called when exiting the driver completely. We unregister the driver with * the platform and exit diff --git a/drivers/net/ethernet/toshiba/spider_net.c b/drivers/net/ethernet/toshiba/spider_net.c index 6199f6b387b..c1ebfe9efcb 100644 --- a/drivers/net/ethernet/toshiba/spider_net.c +++ b/drivers/net/ethernet/toshiba/spider_net.c @@ -114,7 +114,8 @@ spider_net_write_reg(struct spider_net_card *card, u32 reg, u32 value) out_be32(card->regs + reg, value); } -/** spider_net_write_phy - write to phy register +/** + * spider_net_write_phy - write to phy register * @netdev: adapter to be written to * @mii_id: id of MII * @reg: PHY register @@ -137,7 +138,8 @@ spider_net_write_phy(struct net_device *netdev, int mii_id, spider_net_write_reg(card, SPIDER_NET_GPCWOPCMD, writevalue); } -/** spider_net_read_phy - read from phy register +/** + * spider_net_read_phy - read from phy register * @netdev: network device to be read from * @mii_id: id of MII * @reg: PHY register diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c index 1eaf7128afe..1817d0e18fb 100644 --- a/drivers/net/ethernet/xilinx/ll_temac_main.c +++ b/drivers/net/ethernet/xilinx/ll_temac_main.c @@ -197,7 +197,7 @@ static int temac_dcr_setup(struct temac_local *lp, struct platform_device *op, #endif /** - * * temac_dma_bd_release - Release buffer descriptor rings + * temac_dma_bd_release - Release buffer descriptor rings */ static void temac_dma_bd_release(struct net_device *ndev) { |