Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

Conflicts:
	include/net/tcp.h

62 files changed, 93 insertions, 90 deletions

diff --git a/drivers/net/82596.c b/drivers/net/82596.c
index ea6b139b812..1663bc9e45d 100644
--- a/drivers/net/82596.c
+++ b/drivers/net/82596.c
@@ -19,7 +19,7 @@
    TBD:
    * look at deferring rx frames rather than discarding (as per tulip)
    * handle tx ring full as per tulip
-   * performace test to tune rx_copybreak
+   * performance test to tune rx_copybreak
 
    Most of my modifications relate to the braindead big-endian
    implementation by Intel.  When the i596 is operating in
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
index 4e6359fff0e..766aabfdfc7 100644
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/amd8111e.c
@@ -1633,8 +1633,13 @@ static int amd8111e_enable_link_change(struct amd8111e_priv* lp)
 	readl(lp->mmio + CMD7);
 	return 0;
 }
-/* This function is called when a packet transmission fails to complete within a  resonable period, on the assumption that an interrupts have been failed or the  interface is locked up. This function will reinitialize the hardware */
 
+/*
+ * This function is called when a packet transmission fails to complete
+ * within a reasonable period, on the assumption that an interrupt have
+ * failed or the interface is locked up. This function will reinitialize
+ * the hardware.
+ */
 static void amd8111e_tx_timeout(struct net_device *dev)
 {
 	struct amd8111e_priv* lp = netdev_priv(dev);
diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c
index 50cecf41747..73b38c204eb 100644
--- a/drivers/net/appletalk/cops.c
+++ b/drivers/net/appletalk/cops.c
@@ -120,7 +120,7 @@ static int irq = 5;		/* Default IRQ */
  *      DAYNA driver mode:
  *              Dayna DL2000/DaynaTalk PC (Half Length), COPS LT-95, 
  *		Farallon PhoneNET PC III, Farallon PhoneNET PC II
- *	Other cards possibly supported mode unkown though:
+ *	Other cards possibly supported mode unknown though:
  *		Dayna DL2000 (Full length), COPS LT/M (Micro-Channel)
  *
  *	Cards NOT supported by this driver but supported by the ltpc.c
diff --git a/drivers/net/ariadne.h b/drivers/net/ariadne.h
index bb613f292e0..727be5cdd1e 100644
--- a/drivers/net/ariadne.h
+++ b/drivers/net/ariadne.h
@@ -244,7 +244,7 @@ struct Am79C960 {
 #define DLNKTST		0x0010	/* Disable Link Status */
 #define DAPC		0x0008	/* Disable Automatic Polarity Correction */
 #define MENDECL		0x0004	/* MENDEC Loopback Mode */
-#define LRTTSEL		0x0002	/* Low Receive Treshold/Transmit Mode Select */
+#define LRTTSEL		0x0002	/* Low Receive Threshold/Transmit Mode Select */
 #define PORTSEL1	0x0001	/* Port Select Bits */
 #define PORTSEL2	0x8000	/* Port Select Bits */
 #define INTL		0x4000	/* Internal Loopback */
diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c
index 666261b5851..2f4be59b9c0 100644
--- a/drivers/net/atl1c/atl1c_main.c
+++ b/drivers/net/atl1c/atl1c_main.c
@@ -1541,7 +1541,7 @@ static irqreturn_t atl1c_intr(int irq, void *data)
 		if (status & ISR_OVER)
 			if (netif_msg_intr(adapter))
 				dev_warn(&pdev->dev,
-					"TX/RX over flow (status = 0x%x)\n",
+					"TX/RX overflow (status = 0x%x)\n",
 					status & ISR_OVER);
 
 		/* link event */
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index e7323be507d..92b87ef156e 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -444,7 +444,7 @@ enum be_if_flags {
  * filtering capabilities. */
 struct be_cmd_req_if_create {
 	struct be_cmd_req_hdr hdr;
-	u32 version;		/* ignore currntly */
+	u32 version;		/* ignore currently */
 	u32 capability_flags;
 	u32 enable_flags;
 	u8 mac_addr[ETH_ALEN];
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 957a0f7f276..24c7d9900ba 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -1982,7 +1982,7 @@ int be_load_fw(struct be_adapter *adapter, u8 *func)
 		goto fw_exit;
 	}
 
-	dev_info(&adapter->pdev->dev, "Firmware flashed succesfully\n");
+	dev_info(&adapter->pdev->dev, "Firmware flashed successfully\n");
 
 fw_exit:
 	release_firmware(fw);
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h
index b668173ffcb..944964e78c8 100644
--- a/drivers/net/bnx2x_reg.h
+++ b/drivers/net/bnx2x_reg.h
@@ -2536,7 +2536,7 @@
 /* [RC 1] A flag to indicate that overflow error occurred in one of the
    queues. */
 #define QM_REG_OVFERROR 					 0x16805c
-/* [RC 7] the Q were the qverflow occurs */
+/* [RC 7] the Q where the overflow occurs */
 #define QM_REG_OVFQNUM						 0x168058
 /* [R 16] Pause state for physical queues 15-0 */
 #define QM_REG_PAUSESTATE0					 0x168410
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 0d30d1e5e53..00ab51ef312 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -556,7 +556,7 @@ static void rlb_update_rx_clients(struct bonding *bond)
 		}
 	}
 
-	/* do not update the entries again untill this counter is zero so that
+	/* do not update the entries again until this counter is zero so that
 	 * not to confuse the clients.
 	 */
 	bond_info->rlb_update_delay_counter = RLB_UPDATE_DELAY;
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index 49f3de79118..bdbd14727e4 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -1285,7 +1285,7 @@ netdev_tx_t t3_eth_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	/*
 	 * We do not use Tx completion interrupts to free DMAd Tx packets.
-	 * This is good for performamce but means that we rely on new Tx
+	 * This is good for performance but means that we rely on new Tx
 	 * packets arriving to run the destructors of completed packets,
 	 * which open up space in their sockets' send queues.  Sometimes
 	 * we do not get such new packets causing Tx to stall.  A single
diff --git a/drivers/net/ehea/ehea_ethtool.c b/drivers/net/ehea/ehea_ethtool.c
index d7688522336..75b099ce49c 100644
--- a/drivers/net/ehea/ehea_ethtool.c
+++ b/drivers/net/ehea/ehea_ethtool.c
@@ -118,7 +118,7 @@ doit:
 	ret = ehea_set_portspeed(port, sp);
 
 	if (!ret)
-		ehea_info("%s: Port speed succesfully set: %dMbps "
+		ehea_info("%s: Port speed successfully set: %dMbps "
 			  "%s Duplex",
 			  port->netdev->name, port->port_speed,
 			  port->full_duplex == 1 ? "Full" : "Half");
@@ -134,7 +134,7 @@ static int ehea_nway_reset(struct net_device *dev)
 	ret = ehea_set_portspeed(port, EHEA_SPEED_AUTONEG);
 
 	if (!ret)
-		ehea_info("%s: Port speed succesfully set: %dMbps "
+		ehea_info("%s: Port speed successfully set: %dMbps "
 			  "%s Duplex",
 			  port->netdev->name, port->port_speed,
 			  port->full_duplex == 1 ? "Full" : "Half");
diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c
index ed60fd66427..0cab992b3d1 100644
--- a/drivers/net/hamradio/baycom_ser_fdx.c
+++ b/drivers/net/hamradio/baycom_ser_fdx.c
@@ -35,7 +35,7 @@
  *          driver only supports standard serial hardware (8250, 16450, 16550A)
  *
  *          This modem usually draws its supply current out of the otherwise unused
- *          TXD pin of the serial port. Thus a contignuous stream of 0x00-bytes
+ *          TXD pin of the serial port. Thus a contiguous stream of 0x00-bytes
  *          is transmitted to achieve a positive supply voltage.
  *
  *  hsk:    This is a 4800 baud FSK modem, designed for TNC use. It works fine
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index 1e8dd8c74a6..8f7d0d146f2 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -115,7 +115,7 @@ struct smsc_ircc_subsystem_configuration {
 	unsigned short vendor; /* PCI vendor ID */
 	unsigned short device; /* PCI vendor ID */
 	unsigned short subvendor; /* PCI subsystem vendor ID */
-	unsigned short subdevice; /* PCI sybsystem device ID */
+	unsigned short subdevice; /* PCI subsystem device ID */
 	unsigned short sir_io; /* I/O port for SIR */
 	unsigned short fir_io; /* I/O port for FIR */
 	unsigned char  fir_irq; /* FIR IRQ */
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index 49997194bdd..16c91910d6c 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -1384,7 +1384,7 @@ static inline void veth_build_dma_list(struct dma_chunk *list,
 	unsigned long done;
 	int i = 1;
 
-	/* FIXME: skbs are continguous in real addresses.  Do we
+	/* FIXME: skbs are contiguous in real addresses.  Do we
 	 * really need to break it into PAGE_SIZE chunks, or can we do
 	 * it just at the granularity of iSeries real->absolute
 	 * mapping?  Indeed, given the way the allocator works, can we
diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c
index a0c578585a5..b77238dbafb 100644
--- a/drivers/net/lasi_82596.c
+++ b/drivers/net/lasi_82596.c
@@ -47,7 +47,7 @@
    TBD:
    * look at deferring rx frames rather than discarding (as per tulip)
    * handle tx ring full as per tulip
-   * performace test to tune rx_copybreak
+   * performance test to tune rx_copybreak
 
    Most of my modifications relate to the braindead big-endian
    implementation by Intel.  When the i596 is operating in
diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c
index 7a07430206e..b117f7f8b19 100644
--- a/drivers/net/lib82596.c
+++ b/drivers/net/lib82596.c
@@ -47,7 +47,7 @@
    TBD:
    * look at deferring rx frames rather than discarding (as per tulip)
    * handle tx ring full as per tulip
-   * performace test to tune rx_copybreak
+   * performance test to tune rx_copybreak
 
    Most of my modifications relate to the braindead big-endian
    implementation by Intel.  When the i596 is operating in
diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c
index 03b781a7a18..829b9ec9ff6 100644
--- a/drivers/net/mlx4/en_rx.c
+++ b/drivers/net/mlx4/en_rx.c
@@ -204,7 +204,7 @@ static void mlx4_en_free_rx_desc(struct mlx4_en_priv *priv,
 		en_dbg(DRV, priv, "Freeing fragment:%d\n", nr);
 		dma = be64_to_cpu(rx_desc->data[nr].addr);
 
-		en_dbg(DRV, priv, "Unmaping buffer at dma:0x%llx\n", (u64) dma);
+		en_dbg(DRV, priv, "Unmapping buffer at dma:0x%llx\n", (u64) dma);
 		pci_unmap_single(mdev->pdev, dma, skb_frags[nr].size,
 				 PCI_DMA_FROMDEVICE);
 		put_page(skb_frags[nr].page);
diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c
index 8c7279965b4..3d1396af946 100644
--- a/drivers/net/mlx4/en_tx.c
+++ b/drivers/net/mlx4/en_tx.c
@@ -47,7 +47,7 @@ enum {
 static int inline_thold __read_mostly = MAX_INLINE;
 
 module_param_named(inline_thold, inline_thold, int, 0444);
-MODULE_PARM_DESC(inline_thold, "treshold for using inline data");
+MODULE_PARM_DESC(inline_thold, "threshold for using inline data");
 
 int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv,
 			   struct mlx4_en_tx_ring *ring, u32 size,
diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h
index 4376147b0ea..82c3ebc584e 100644
--- a/drivers/net/mlx4/mlx4_en.h
+++ b/drivers/net/mlx4/mlx4_en.h
@@ -162,7 +162,7 @@ enum {
 #define MLX4_EN_DEF_RX_PAUSE	1
 #define MLX4_EN_DEF_TX_PAUSE	1
 
-/* Interval between sucessive polls in the Tx routine when polling is used
+/* Interval between successive polls in the Tx routine when polling is used
    instead of interrupts (in per-core Tx rings) - should be power of 2 */
 #define MLX4_EN_TX_POLL_MODER	16
 #define MLX4_EN_TX_POLL_TIMEOUT	(HZ / 4)
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index 89c4948300a..0c768593aad 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -314,7 +314,7 @@ static void gelic_card_reset_chain(struct gelic_card *card,
  * @card: card structure
  * @descr: descriptor to re-init
  *
- * return 0 on succes, <0 on failure
+ * return 0 on success, <0 on failure
  *
  * allocates a new rx skb, iommu-maps it and attaches it to the descriptor.
  * Activate the descriptor state-wise
diff --git a/drivers/net/ps3_gelic_wireless.h b/drivers/net/ps3_gelic_wireless.h
index 5b631c6c977..0a88b535197 100644
--- a/drivers/net/ps3_gelic_wireless.h
+++ b/drivers/net/ps3_gelic_wireless.h
@@ -199,7 +199,7 @@ struct gelic_eurus_rssi_info {
 /* for 'stat' member of gelic_wl_info */
 enum gelic_wl_info_status_bit {
 	GELIC_WL_STAT_CONFIGURED,
-	GELIC_WL_STAT_CH_INFO,   /* ch info aquired */
+	GELIC_WL_STAT_CH_INFO,   /* ch info acquired */
 	GELIC_WL_STAT_ESSID_SET, /* ESSID specified by userspace */
 	GELIC_WL_STAT_BSSID_SET, /* BSSID specified by userspace */
 	GELIC_WL_STAT_WPA_PSK_SET, /* PMK specified by userspace */
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index e3e6bc917c8..dd35066a7f8 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -3651,7 +3651,7 @@ static int ql_adapter_up(struct ql3_adapter *qdev)
 		ql_sem_unlock(qdev, QL_DRVR_SEM_MASK);
 	} else {
 		printk(KERN_ERR PFX
-		       "%s: Could not aquire driver lock.\n",
+		       "%s: Could not acquire driver lock.\n",
 		       ndev->name);
 		goto err_lock;
 	}
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 0dd7839322b..cc4218667cb 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -3238,7 +3238,7 @@ static u64 s2io_mdio_read(u32 mmd_type, u64 addr, struct net_device *dev)
 
 /**
  *  s2io_chk_xpak_counter - Function to check the status of the xpak counters
- *  @counter      : couter value to be updated
+ *  @counter      : counter value to be updated
  *  @flag         : flag to indicate the status
  *  @type         : counter type
  *  Description:
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 9a12d88ac2d..7360d4bbf75 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -1760,7 +1760,7 @@ static int sis900_rx(struct net_device *net_dev)
 				sis_priv->rx_ring[entry].bufptr, RX_BUF_SIZE,
 				PCI_DMA_FROMDEVICE);
 
-			/* refill the Rx buffer, what if there is not enought
+			/* refill the Rx buffer, what if there is not enough
 			 * memory for new socket buffer ?? */
 			if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
 				/*
@@ -1775,7 +1775,7 @@ static int sis900_rx(struct net_device *net_dev)
 			}
 
 			/* This situation should never happen, but due to
-			   some unknow bugs, it is possible that
+			   some unknown bugs, it is possible that
 			   we are working on NULL sk_buff :-( */
 			if (sis_priv->rx_skbuff[entry] == NULL) {
 				if (netif_msg_rx_err(sis_priv))
diff --git a/drivers/net/skfp/h/smc.h b/drivers/net/skfp/h/smc.h
index 1758d954836..026a83b9f74 100644
--- a/drivers/net/skfp/h/smc.h
+++ b/drivers/net/skfp/h/smc.h
@@ -393,10 +393,10 @@ struct smt_config {
 					 */
 	u_long	mac_d_max ;		/* MAC : D_Max timer value */
 
-	u_long lct_short ;		/* LCT : error threshhold */
-	u_long lct_medium ;		/* LCT : error threshhold */
-	u_long lct_long ;		/* LCT : error threshhold */
-	u_long lct_extended ;		/* LCT : error threshhold */
+	u_long lct_short ;		/* LCT : error threshold */
+	u_long lct_medium ;		/* LCT : error threshold */
+	u_long lct_long ;		/* LCT : error threshold */
+	u_long lct_extended ;		/* LCT : error threshold */
 } ;
 
 #ifdef	DEBUG
diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c
index b27156eaf26..db216a72850 100644
--- a/drivers/net/skfp/skfddi.c
+++ b/drivers/net/skfp/skfddi.c
@@ -1002,7 +1002,7 @@ static int skfp_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 		}
 		break;
 	default:
-		printk("ioctl for %s: unknow cmd: %04x\n", dev->name, ioc.cmd);
+		printk("ioctl for %s: unknown cmd: %04x\n", dev->name, ioc.cmd);
 		status = -EOPNOTSUPP;
 
 	}			// switch
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 013c9f52cea..89a05d674dd 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -2017,7 +2017,7 @@ static void sky2_link_down(struct sky2_port *sky2)
 
 	netif_carrier_off(sky2->netdev);
 
-	/* Turn on link LED */
+	/* Turn off link LED */
 	sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
 
 	if (netif_msg_link(sky2))
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index 4d0d5c56bed..20d6095cf41 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -816,7 +816,7 @@ static int smsc911x_mii_probe(struct net_device *dev)
 	SMSC_TRACE(HW, "Passed Loop Back Test");
 #endif				/* USE_PHY_WORK_AROUND */
 
-	SMSC_TRACE(HW, "phy initialised succesfully");
+	SMSC_TRACE(HW, "phy initialised successfully");
 	return 0;
 }
 
diff --git a/drivers/net/smsc911x.h b/drivers/net/smsc911x.h
index b5716bd8a59..016360c65ce 100644
--- a/drivers/net/smsc911x.h
+++ b/drivers/net/smsc911x.h
@@ -30,7 +30,7 @@
 #define SMSC_NAPI_WEIGHT	16
 
 /* implements a PHY loopback test at initialisation time, to ensure a packet
- * can be succesfully looped back */
+ * can be successfully looped back */
 #define USE_PHY_WORK_AROUND
 
 #define DPRINTK(nlevel, klevel, fmt, args...) \
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index 782910cf220..218524857bf 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -410,7 +410,7 @@ spider_net_free_rx_chain_contents(struct spider_net_card *card)
  * @card: card structure
  * @descr: descriptor to re-init
  *
- * Return 0 on succes, <0 on failure.
+ * Return 0 on success, <0 on failure.
  *
  * Allocates a new rx skb, iommu-maps it and attaches it to the
  * descriptor. Mark the descriptor as activated, ready-to-use.
diff --git a/drivers/net/stmmac/gmac.c b/drivers/net/stmmac/gmac.c
index b624bb5bae0..52586ee6895 100644
--- a/drivers/net/stmmac/gmac.c
+++ b/drivers/net/stmmac/gmac.c
@@ -112,7 +112,7 @@ static void gmac_dma_operation_mode(unsigned long ioaddr, int txmode,
 			      " (threshold = %d)\n", txmode);
 		csr6 &= ~DMA_CONTROL_TSF;
 		csr6 &= DMA_CONTROL_TC_TX_MASK;
-		/* Set the transmit threashold */
+