Merge /spare/repo/linux-2.6/

39 files changed, 2753 insertions, 2457 deletions

diff --git a/drivers/net/3c523.c b/drivers/net/3c523.c
index 1247a25f109..9e1fe2e0478 100644
--- a/drivers/net/3c523.c
+++ b/drivers/net/3c523.c
@@ -1274,6 +1274,7 @@ module_param_array(irq, int, NULL, 0);
 module_param_array(io, int, NULL, 0);
 MODULE_PARM_DESC(io, "EtherLink/MC I/O base address(es)");
 MODULE_PARM_DESC(irq, "EtherLink/MC IRQ number(s)");
+MODULE_LICENSE("GPL");
 
 int init_module(void)
 {
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 47e158fa5aa..2b55687f6ee 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1320,7 +1320,7 @@ config FORCEDETH
 
 config CS89x0
 	tristate "CS89x0 support"
-	depends on NET_PCI && (ISA || ARCH_IXDP2X01)
+	depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105
 	---help---
 	  Support for CS89x0 chipset based Ethernet cards. If you have a
 	  network (Ethernet) card of this type, say Y and read the
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 3fe8ba992c3..f1bd45e3da3 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -1285,6 +1285,9 @@ static int b44_open(struct net_device *dev)
 	b44_init_hw(bp);
 	bp->flags |= B44_FLAG_INIT_COMPLETE;
 
+	netif_carrier_off(dev);
+	b44_check_phy(bp);
+
 	spin_unlock_irq(&bp->lock);
 
 	init_timer(&bp->timer);
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 25e4495de79..b96d6fb1929 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -174,6 +174,13 @@ static unsigned int cs8900_irq_map[] = {1,0,0,0};
 #include <asm/irq.h>
 static unsigned int netcard_portlist[] __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
 static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
+#elif defined(CONFIG_ARCH_PNX0105)
+#include <asm/irq.h>
+#include <asm/arch/gpio.h>
+#define CIRRUS_DEFAULT_BASE	IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000)	/* = Physical address 0x48200000 */
+#define CIRRUS_DEFAULT_IRQ	VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */
+static unsigned int netcard_portlist[] __initdata = {CIRRUS_DEFAULT_BASE, 0};
+static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0};
 #else
 static unsigned int netcard_portlist[] __initdata =
    { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
@@ -431,6 +438,30 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
 #endif
         }
 
+#ifdef CONFIG_ARCH_PNX0105
+	initialize_ebi();
+
+	/* Map GPIO registers for the pins connected to the CS8900a. */
+	if (map_cirrus_gpio() < 0)
+		return -ENODEV;
+
+	reset_cirrus();
+
+	/* Map event-router registers. */
+	if (map_event_router() < 0)
+		return -ENODEV;
+
+	enable_cirrus_irq();
+
+	unmap_cirrus_gpio();
+	unmap_event_router();
+
+	dev->base_addr = ioaddr;
+
+	for (i = 0 ; i < 3 ; i++)
+		readreg(dev, 0);
+#endif
+
 	/* Grab the region so we can find another board if autoIRQ fails. */
 	/* WTF is going on here? */
 	if (!request_region(ioaddr & ~3, NETCARD_IO_EXTENT, DRV_NAME)) {
@@ -672,7 +703,7 @@ printk("PP_addr=0x%x\n", inw(ioaddr + ADD_PORT));
 	} else {
 		i = lp->isa_config & INT_NO_MASK;
 		if (lp->chip_type == CS8900) {
-#ifdef CONFIG_ARCH_IXDP2X01
+#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105)
 		        i = cs8900_irq_map[0];
 #else
 			/* Translate the IRQ using the IRQ mapping table. */
@@ -1145,7 +1176,7 @@ net_open(struct net_device *dev)
 	int i;
 	int ret;
 
-#ifndef CONFIG_SH_HICOSH4 /* uses irq#1, so this won't work */
+#if !defined(CONFIG_SH_HICOSH4) && !defined(CONFIG_ARCH_PNX0105) /* uses irq#1, so this won't work */
 	if (dev->irq < 2) {
 		/* Allow interrupts to be generated by the chip */
 /* Cirrus' release had this: */
@@ -1176,7 +1207,7 @@ net_open(struct net_device *dev)
 	else
 #endif
 	{
-#ifndef CONFIG_ARCH_IXDP2X01
+#if !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX0105)
 		if (((1 << dev->irq) & lp->irq_map) == 0) {
 			printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
                                dev->name, dev->irq, lp->irq_map);
@@ -1261,6 +1292,9 @@ net_open(struct net_device *dev)
 	case A_CNF_MEDIA_10B_2: result = lp->adapter_cnf & A_CNF_10B_2; break;
         default: result = lp->adapter_cnf & (A_CNF_10B_T | A_CNF_AUI | A_CNF_10B_2);
         }
+#ifdef CONFIG_ARCH_PNX0105
+	result = A_CNF_10B_T;
+#endif
         if (!result) {
                 printk(KERN_ERR "%s: EEPROM is configured for unavailable media\n", dev->name);
         release_irq:
diff --git a/drivers/net/cs89x0.h b/drivers/net/cs89x0.h
index b0ef7ad2baa..bd3ad8e6cce 100644
--- a/drivers/net/cs89x0.h
+++ b/drivers/net/cs89x0.h
@@ -16,7 +16,7 @@
 
 #include <linux/config.h>
 
-#ifdef CONFIG_ARCH_IXDP2X01
+#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105)
 /* IXDP2401/IXDP2801 uses dword-aligned register addressing */
 #define CS89x0_PORT(reg) ((reg) * 2)
 #else
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index cfaa6b2bf34..1e56c8eea35 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1093,11 +1093,16 @@ static int e100_phy_init(struct nic *nic)
 	}
 
 	if((nic->mac >= mac_82550_D102) || ((nic->flags & ich) && 
-		(mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) && 
-		(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled)))
-		/* enable/disable MDI/MDI-X auto-switching */
-		mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG,
-			nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH);
+	   (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000))) {
+		/* enable/disable MDI/MDI-X auto-switching.
+		   MDI/MDI-X auto-switching is disabled for 82551ER/QM chips */
+		if((nic->mac == mac_82551_E) || (nic->mac == mac_82551_F) ||
+		   (nic->mac == mac_82551_10) || (nic->mii.force_media) || 
+		   !(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled)) 
+			mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG, 0);
+		else
+			mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG, NCONFIG_AUTO_SWITCH);
+	}
 
 	return 0;
 }
@@ -1666,8 +1671,10 @@ static irqreturn_t e100_intr(int irq, void *dev_id, struct pt_regs *regs)
 	if(stat_ack & stat_ack_rnr)
 		nic->ru_running = RU_SUSPENDED;
 
-	e100_disable_irq(nic);
-	netif_rx_schedule(netdev);
+	if(likely(netif_rx_schedule_prep(netdev))) {
+		e100_disable_irq(nic);
+		__netif_rx_schedule(netdev);
+	}
 
 	return IRQ_HANDLED;
 }
@@ -2335,11 +2342,11 @@ static int __devinit e100_probe(struct pci_dev *pdev,
 		goto err_out_iounmap;
 	}
 
-	e100_phy_init(nic);
-
 	if((err = e100_eeprom_load(nic)))
 		goto err_out_free;
 
+	e100_phy_init(nic);
+
 	memcpy(netdev->dev_addr, nic->eeprom, ETH_ALEN);
 	if(!is_valid_ether_addr(netdev->dev_addr)) {
 		DPRINTK(PROBE, ERR, "Invalid MAC address from "
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index af1e82c5b80..092757bc721 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -140,7 +140,7 @@ struct e1000_adapter;
 #define E1000_RX_BUFFER_WRITE	16	/* Must be power of 2 */
 
 #define AUTO_ALL_MODES            0
-#define E1000_EEPROM_82544_APM    0x0400
+#define E1000_EEPROM_82544_APM    0x0004
 #define E1000_EEPROM_APME         0x0400
 
 #ifndef E1000_MASTER_SLAVE
@@ -159,7 +159,7 @@ struct e1000_adapter;
  * so a DMA handle can be stored along with the buffer */
 struct e1000_buffer {
 	struct sk_buff *skb;
-	uint64_t dma;
+	dma_addr_t dma;
 	unsigned long time_stamp;
 	uint16_t length;
 	uint16_t next_to_watch;
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 237247f74df..f133ff0b0b9 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -105,7 +105,7 @@ static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = {
 static int
 e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 {
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 
 	if(hw->media_type == e1000_media_type_copper) {
@@ -141,9 +141,9 @@ e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 				     SUPPORTED_FIBRE |
 				     SUPPORTED_Autoneg);
 
-		ecmd->advertising = (SUPPORTED_1000baseT_Full |
-				     SUPPORTED_FIBRE |
-				     SUPPORTED_Autoneg);
+		ecmd->advertising = (ADVERTISED_1000baseT_Full |
+				     ADVERTISED_FIBRE |
+				     ADVERTISED_Autoneg);
 
 		ecmd->port = PORT_FIBRE;
 
@@ -179,13 +179,24 @@ e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 static int
 e1000_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 {
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 
 	if(ecmd->autoneg == AUTONEG_ENABLE) {
 		hw->autoneg = 1;
-		hw->autoneg_advertised = 0x002F;
-		ecmd->advertising = 0x002F;
+		if(hw->media_type == e1000_media_type_fiber)
+			hw->autoneg_advertised = ADVERTISED_1000baseT_Full |
+				     ADVERTISED_FIBRE |
+				     ADVERTISED_Autoneg;
+		else 
+			hw->autoneg_advertised = ADVERTISED_10baseT_Half |
+						  ADVERTISED_10baseT_Full |
+						  ADVERTISED_100baseT_Half |
+						  ADVERTISED_100baseT_Full |
+						  ADVERTISED_1000baseT_Full|
+						  ADVERTISED_Autoneg |
+						  ADVERTISED_TP;
+		ecmd->advertising = hw->autoneg_advertised;
 	} else
 		if(e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex))
 			return -EINVAL;
@@ -206,7 +217,7 @@ static void
 e1000_get_pauseparam(struct net_device *netdev,
                      struct ethtool_pauseparam *pause)
 {
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 
 	pause->autoneg = 
@@ -226,7 +237,7 @@ static int
 e1000_set_pauseparam(struct net_device *netdev,
                      struct ethtool_pauseparam *pause)
 {
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 	
 	adapter->fc_autoneg = pause->autoneg;
@@ -259,14 +270,14 @@ e1000_set_pauseparam(struct net_device *netdev,
 static uint32_t
 e1000_get_rx_csum(struct net_device *netdev)
 {
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 	return adapter->rx_csum;
 }
 
 static int
 e1000_set_rx_csum(struct net_device *netdev, uint32_t data)
 {
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 	adapter->rx_csum = data;
 
 	if(netif_running(netdev)) {
@@ -286,7 +297,7 @@ e1000_get_tx_csum(struct net_device *netdev)
 static int
 e1000_set_tx_csum(struct net_device *netdev, uint32_t data)
 {
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 
 	if(adapter->hw.mac_type < e1000_82543) {
 		if (!data)
@@ -306,8 +317,8 @@ e1000_set_tx_csum(struct net_device *netdev, uint32_t data)
 static int
 e1000_set_tso(struct net_device *netdev, uint32_t data)
 {
-	struct e1000_adapter *adapter = netdev->priv;
-	if ((adapter->hw.mac_type < e1000_82544) ||
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	if((adapter->hw.mac_type < e1000_82544) ||
 	    (adapter->hw.mac_type == e1000_82547)) 
 		return data ? -EINVAL : 0;
 
@@ -322,14 +333,14 @@ e1000_set_tso(struct net_device *netdev, uint32_t data)
 static uint32_t
 e1000_get_msglevel(struct net_device *netdev)
 {
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 	return adapter->msg_enable;
 }
 
 static void
 e1000_set_msglevel(struct net_device *netdev, uint32_t data)
 {
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 	adapter->msg_enable = data;
 }
 
@@ -344,7 +355,7 @@ static void
 e1000_get_regs(struct net_device *netdev,
 	       struct ethtool_regs *regs, void *p)
 {
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 	uint32_t *regs_buff = p;
 	uint16_t phy_data;
@@ -432,7 +443,7 @@ e1000_get_regs(struct net_device *netdev,
 static int
 e1000_get_eeprom_len(struct net_device *netdev)
 {
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 	return adapter->hw.eeprom.word_size * 2;
 }
 
@@ -440,7 +451,7 @@ static int
 e1000_get_eeprom(struct net_device *netdev,
                       struct ethtool_eeprom *eeprom, uint8_t *bytes)
 {
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 	uint16_t *eeprom_buff;
 	int first_word, last_word;
@@ -486,7 +497,7 @@ static int
 e1000_set_eeprom(struct net_device *netdev,
                       struct ethtool_eeprom *eeprom, uint8_t *bytes)
 {
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 	uint16_t *eeprom_buff;
 	void *ptr;
@@ -547,7 +558,7 @@ static void
 e1000_get_drvinfo(struct net_device *netdev,
                        struct ethtool_drvinfo *drvinfo)
 {
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 
 	strncpy(drvinfo->driver,  e1000_driver_name, 32);
 	strncpy(drvinfo->version, e1000_driver_version, 32);
@@ -563,7 +574,7 @@ static void
 e1000_get_ringparam(struct net_device *netdev,
                     struct ethtool_ringparam *ring)
 {
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 	e1000_mac_type mac_type = adapter->hw.mac_type;
 	struct e1000_desc_ring *txdr = &adapter->tx_ring;
 	struct e1000_desc_ring *rxdr = &adapter->rx_ring;
@@ -584,7 +595,7 @@ static int
 e1000_set_ringparam(struct net_device *netdev,
                     struct ethtool_ringparam *ring)
 {
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 	e1000_mac_type mac_type = adapter->hw.mac_type;
 	struct e1000_desc_ring *txdr = &adapter->tx_ring;
 	struct e1000_desc_ring *rxdr = &adapter->rx_ring;
@@ -651,6 +662,9 @@ err_setup_rx:
 		E1000_WRITE_REG(&adapter->hw, R, (test[pat] & W));             \
 		value = E1000_READ_REG(&adapter->hw, R);                       \
 		if(value != (test[pat] & W & M)) {                             \
+			DPRINTK(DRV, ERR, "pattern test reg %04X failed: got " \
+			        "0x%08X expected 0x%08X\n",                    \
+			        E1000_##R, value, (test[pat] & W & M));        \
 			*data = (adapter->hw.mac_type < e1000_82543) ?         \
 				E1000_82542_##R : E1000_##R;                   \
 			return 1;                                              \
@@ -663,7 +677,9 @@ err_setup_rx:
 	uint32_t value;                                                        \
 	E1000_WRITE_REG(&adapter->hw, R, W & M);                               \
 	value = E1000_READ_REG(&adapter->hw, R);                               \
-	if ((W & M) != (value & M)) {                                          \
+	if((W & M) != (value & M)) {                                          \
+		DPRINTK(DRV, ERR, "set/check reg %04X test failed: got 0x%08X "\
+		        "expected 0x%08X\n", E1000_##R, (value & M), (W & M)); \
 		*data = (adapter->hw.mac_type < e1000_82543) ?                 \
 			E1000_82542_##R : E1000_##R;                           \
 		return 1;                                                      \
@@ -673,18 +689,33 @@ err_setup_rx:
 static int
 e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data)
 {
-	uint32_t value;
-	uint32_t i;
+	uint32_t value, before, after;
+	uint32_t i, toggle;
 
 	/* The status register is Read Only, so a write should fail.
 	 * Some bits that get toggled are ignored.
 	 */
-	value = (E1000_READ_REG(&adapter->hw, STATUS) & (0xFFFFF833));
-	E1000_WRITE_REG(&adapter->hw, STATUS, (0xFFFFFFFF));
-	if(value != (E1000_READ_REG(&adapter->hw, STATUS) & (0xFFFFF833))) {
+        switch (adapter->hw.mac_type) {
+	case e1000_82573:
+		toggle = 0x7FFFF033;
+		break;
+	default:
+		toggle = 0xFFFFF833;
+		break;
+	}
+
+	before = E1000_READ_REG(&adapter->hw, STATUS);
+	value = (E1000_READ_REG(&adapter->hw, STATUS) & toggle);
+	E1000_WRITE_REG(&adapter->hw, STATUS, toggle);
+	after = E1000_READ_REG(&adapter->hw, STATUS) & toggle;
+	if(value != after) {
+		DPRINTK(DRV, ERR, "failed STATUS register test got: "
+		        "0x%08X expected: 0x%08X\n", after, value);
 		*data = 1;
 		return 1;
 	}
+	/* restore previous status */
+	E1000_WRITE_REG(&adapter->hw, STATUS, before);
 
 	REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
 	REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
@@ -766,7 +797,7 @@ e1000_test_intr(int irq,
 		struct pt_regs *regs)
 {
 	struct net_device *netdev = (struct net_device *) data;
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 
 	adapter->test_icr |= E1000_READ_REG(&adapter->hw, ICR);
 
@@ -1214,6 +1245,7 @@ e1000_set_phy_loopback(struct e1000_adapter *adapter)
 	case e1000_82541_rev_2:
 	case e1000_82547:
 	case e1000_82547_rev_2:
+	case e1000_82573:
 		return e1000_integrated_phy_loopback(adapter);
 		break;
 
@@ -1422,7 +1454,7 @@ static void
 e1000_diag_test(struct net_device *netdev,
 		   struct ethtool_test *eth_test, uint64_t *data)
 {
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 	boolean_t if_running = netif_running(netdev);
 
 	if(eth_test->flags == ETH_TEST_FL_OFFLINE) {
@@ -1482,7 +1514,7 @@ e1000_diag_test(struct net_device *netdev,
 static void
 e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 {
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 
 	switch(adapter->hw.device_id) {
@@ -1527,7 +1559,7 @@ e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 static int
 e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 {
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 
 	switch(adapter->hw.device_id) {
@@ -1588,22 +1620,31 @@ e1000_led_blink_callback(unsigned long data)
 static int
 e1000_phys_id(struct net_device *netdev, uint32_t data)
 {
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 
 	if(!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ))
 		data = (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ);
 
-	if(!adapter->blink_timer.function) {
-		init_timer(&adapter->blink_timer);
-		adapter->blink_timer.function = e1000_led_blink_callback;
-		adapter->blink_timer.data = (unsigned long) adapter;
+	if(adapter->hw.mac_type < e1000_82573) {
+		if(!adapter->blink_timer.function) {
+			init_timer(&adapter->blink_timer);
+			adapter->blink_timer.function = e1000_led_blink_callback;
+			adapter->blink_timer.data = (unsigned long) adapter;
+		}
+		e1000_setup_led(&adapter->hw);
+		mod_timer(&adapter->blink_timer, jiffies);
+		msleep_interruptible(data * 1000);
+		del_timer_sync(&adapter->blink_timer);
+	}
+	else {
+		E1000_WRITE_REG(&adapter->hw, LEDCTL, (E1000_LEDCTL_LED2_BLINK_RATE |
+			E1000_LEDCTL_LED1_BLINK | E1000_LEDCTL_LED2_BLINK | 
+			(E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) |
+			(E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED1_MODE_SHIFT) |
+			(E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED0_MODE_SHIFT)));
+		msleep_interruptible(data * 1000);
 	}
 
-	e1000_setup_led(&adapter->hw);
-	mod_timer(&adapter->blink_timer, jiffies);
-
-	msleep_interruptible(data * 1000);
-	del_timer_sync(&adapter->blink_timer);
 	e1000_led_off(&adapter->hw);
 	clear_bit(E1000_LED_ON, &adapter->led_status);
 	e1000_cleanup_led(&adapter->hw);
@@ -1614,7 +1655,7 @@ e1000_phys_id(struct net_device *netdev, uint32_t data)
 static int
 e1000_nway_reset(struct net_device *netdev)
 {
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 	if(netif_running(netdev)) {
 		e1000_down(adapter);
 		e1000_up(adapter);
@@ -1632,7 +1673,7 @@ static void
 e1000_get_ethtool_stats(struct net_device *netdev, 
 		struct ethtool_stats *stats, uint64_t *data)
 {
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 	int i;
 
 	e1000_update_stats(adapter);
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 723589b28be..045f5426ab9 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -354,18 +354,27 @@ e1000_set_media_type(struct e1000_hw *hw)
         hw->media_type = e1000_media_type_internal_serdes;
         break;
     default:
-        if(hw->mac_type >= e1000_82543) {
+        switch (hw->mac_type) {
+        case e1000_82542_rev2_0:
+        case e1000_82542_rev2_1:
+            hw->media_type = e1000_media_type_fiber;
+            break;
+        case e1000_82573:
+            /* The STATUS_TBIMODE bit is reserved or reused for the this
+             * device.
+             */
+            hw->media_type = e1000_media_type_copper;
+            break;
+        default:
             status = E1000_READ_REG(hw, STATUS);
-            if(status & E1000_STATUS_TBIMODE) {
+            if (status & E1000_STATUS_TBIMODE) {
                 hw->media_type = e1000_media_type_fiber;
                 /* tbi_compatibility not valid on fiber */
                 hw->tbi_compatibility_en = FALSE;
             } else {
                 hw->media_type = e1000_media_type_copper;
             }
-        } else {
-            /* This is an 82542 (fiber only) */
-            hw->media_type = e1000_media_type_fiber;
+            break;
         }
     }
 }
@@ -1189,9 +1198,9 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw)
         ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
         if(ret_val)
             return ret_val;
-        }
+    }
 
-   return E1000_SUCCESS;
+    return E1000_SUCCESS;
 }
 
 
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index a0263ee96c6..93e9f878875 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -66,6 +66,7 @@ typedef enum {
     e1000_eeprom_spi,
     e1000_eeprom_microwire,
     e1000_eeprom_flash,
+    e1000_eeprom_none, /* No NVM support */
     e1000_num_eeprom_types
 } e1000_eeprom_type;
 
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 137226d98d4..cb7f051a60a 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -29,6 +29,8 @@
 #include "e1000.h"
 
 /* Change Log
+ * 6.0.58       4/20/05
+ *   o Accepted ethtool cleanup patch from Stephen Hemminger 
  * 6.0.44+	2/15/05
  *   o applied Anton's patch to resolve tx hang in hardware
  *   o Applied Andrew Mortons patch - e1000 stops working after resume
@@ -41,9 +43,9 @@ char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
 #else
 #define DRIVERNAPI "-NAPI"
 #endif
-#define DRV_VERSION "6.0.54-k2"DRIVERNAPI
+#define DRV_VERSION		"6.0.60-k2"DRIVERNAPI
 char e1000_driver_version[] = DRV_VERSION;
-char e1000_copyright[] = "Copyright (c) 1999-2004 Intel Corporation.";
+char e1000_copyright[] = "Copyright (c) 1999-2005 Intel Corporation.";
 
 /* e1000_pci_tbl - PCI Device ID Table
  *
@@ -517,7 +519,7 @@ e1000_probe(struct pci_dev *pdev,
 	SET_NETDEV_DEV(netdev, &pdev->dev);
 
 	pci_set_drvdata(pdev, netdev);
-	adapter = netdev->priv;
+	adapter = netdev_priv(netdev);
 	adapter->netdev = netdev;
 	adapter->pdev = pdev;
 	adapter->hw.back = adapter;
@@ -738,7 +740,7 @@ static void __devexit
 e1000_remove(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 	uint32_t manc, swsm;
 
 	flush_scheduled_work();
@@ -871,7 +873,7 @@ e1000_sw_init(struct e1000_adapter *adapter)
 static int
 e1000_open(struct net_device *netdev)
 {
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 	int err;
 
 	/* allocate transmit descriptors */
@@ -919,7 +921,7 @@ err_setup_tx:
 static int
 e1000_close(struct net_device *netdev)
 {
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 
 	e1000_down(adapter);
 
@@ -1599,7 +1601,7 @@ e1000_leave_82542_rst(struct e1000_adapter *adapter)
 static int
 e1000_set_mac(struct net_device *netdev, void *p)
 {
-	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct sockaddr *addr = p;
 
 	if(!is_valid_ether_addr(addr->sa_data))
@@ -1634,7 +1636,7 @@ e1