intel: Move the Intel wired LAN drivers

Moves the Intel wired LAN drivers into drivers/net/ethernet/intel/ and
the necessary Kconfig and Makefile changes.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

100 files changed, 235 insertions, 209 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 77ab2e18947..e6491169cc6 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1032,32 +1032,6 @@ config TC35815
 	depends on NET_PCI && PCI && MIPS
 	select PHYLIB
 
-config E100
-	tristate "Intel(R) PRO/100+ support"
-	depends on NET_PCI && PCI
-	select MII
-	---help---
-	  This driver supports Intel(R) PRO/100 family of adapters.
-	  To verify that your adapter is supported, find the board ID number 
-	  on the adapter. Look for a label that has a barcode and a number 
-	  in the format 123456-001 (six digits hyphen three digits). 
-
-	  Use the above information and the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  to identify the adapter.
-
-	  For the latest Intel PRO/100 network driver for Linux, see:
-
-	  <http://www.intel.com/p/en_US/support/highlights/network/pro100plus>
-
-	  More specific information on configuring the driver is in 
-	  <file:Documentation/networking/e100.txt>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called e100.
-
 config FEALNX
 	tristate "Myson MTD-8xx PCI Ethernet support"
 	depends on NET_PCI && PCI
@@ -1490,47 +1464,6 @@ config DL2K
 	  To compile this driver as a module, choose M here: the
 	  module will be called dl2k.
 
-config E1000
-	tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
-	depends on PCI
-	---help---
-	  This driver supports Intel(R) PRO/1000 gigabit ethernet family of
-	  adapters.  For more information on how to identify your adapter, go 
-	  to the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
-
-	  <http://support.intel.com>
-
-	  More specific information on configuring the driver is in 
-	  <file:Documentation/networking/e1000.txt>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called e1000.
-
-config E1000E
-	tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
-	depends on PCI && (!SPARC32 || BROKEN)
-	select CRC32
-	---help---
-	  This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
-	  ethernet family of adapters. For PCI or PCI-X e1000 adapters,
-	  use the regular e1000 driver For more information on how to
-	  identify your adapter, go to the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
-
-	  <http://support.intel.com>
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called e1000e.
-
 config IP1000
 	tristate "IP1000 Gigabit Ethernet support"
 	depends on PCI && EXPERIMENTAL
@@ -1541,57 +1474,6 @@ config IP1000
 	  To compile this driver as a module, choose M here: the module
 	  will be called ipg.  This is recommended.
 
-config IGB
-	tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
-	depends on PCI
-	---help---
-	  This driver supports Intel(R) 82575/82576 gigabit ethernet family of
-	  adapters.  For more information on how to identify your adapter, go
-	  to the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
-
-	  <http://support.intel.com>
-
-	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/e1000.txt>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called igb.
-
-config IGB_DCA
-	bool "Direct Cache Access (DCA) Support"
-	default y
-	depends on IGB && DCA && !(IGB=y && DCA=m)
-	---help---
-	  Say Y here if you want to use Direct Cache Access (DCA) in the
-	  driver.  DCA is a method for warming the CPU cache before data
-	  is used, with the intent of lessening the impact of cache misses.
-
-config IGBVF
-	tristate "Intel(R) 82576 Virtual Function Ethernet support"
-	depends on PCI
-	---help---
-	  This driver supports Intel(R) 82576 virtual functions.  For more
-	  information on how to identify your adapter, go to the Adapter &
-	  Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
-
-	  <http://support.intel.com>
-
-	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/e1000.txt>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called igbvf.
-
 source "drivers/net/ixp2000/Kconfig"
 
 config NS83820
@@ -1958,88 +1840,6 @@ config ENIC
 	help
 	  This enables the support for the Cisco VIC Ethernet card.
 
-config IXGBE
-	tristate "Intel(R) 10GbE PCI Express adapters support"
-	depends on PCI && INET
-	select MDIO
-	---help---
-	  This driver supports Intel(R) 10GbE PCI Express family of
-	  adapters.  For more information on how to identify your adapter, go
-	  to the Adapter & Driver ID Guide at:
-
-	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
-	  For general information and support, go to the Intel support
-	  website at:
-
-	  <http://support.intel.com>
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ixgbe.
-
-config IXGBE_DCA
-	bool "Direct Cache Access (DCA) Support"
-	default y
-	depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
-	---help---
-	  Say Y here if you want to use Direct Cache Access (DCA) in the
-	  driver.  DCA is a method for warming the CPU cache before data
-	  is used, with the