Merge 3.9-rc7 intp tty-next

We want the fixes here.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

62 files changed, 1047 insertions, 880 deletions

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 6bbd90e1123..07401a3e256 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1976,12 +1976,11 @@ static int __bond_release_one(struct net_device *bond_dev,
 		return -EINVAL;
 	}
 
+	write_unlock_bh(&bond->lock);
 	/* unregister rx_handler early so bond_handle_frame wouldn't be called
 	 * for this slave anymore.
 	 */
 	netdev_rx_handler_unregister(slave_dev);
-	write_unlock_bh(&bond->lock);
-	synchronize_net();
 	write_lock_bh(&bond->lock);
 
 	if (!all && !bond->params.fail_over_mac) {
@@ -4847,9 +4846,18 @@ static int __net_init bond_net_init(struct net *net)
 static void __net_exit bond_net_exit(struct net *net)
 {
 	struct bond_net *bn = net_generic(net, bond_net_id);
+	struct bonding *bond, *tmp_bond;
+	LIST_HEAD(list);
 
 	bond_destroy_sysfs(bn);
 	bond_destroy_proc_dir(bn);
+
+	/* Kill off any bonds created after unregistering bond rtnl ops */
+	rtnl_lock();
+	list_for_each_entry_safe(bond, tmp_bond, &bn->dev_list, bond_list)
+		unregister_netdevice_queue(bond->dev, &list);
+	unregister_netdevice_many(&list);
+	rtnl_unlock();
 }
 
 static struct pernet_operations bond_net_ops = {
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index db103e03ba0..ea7a388f484 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -527,7 +527,7 @@ static ssize_t bonding_store_arp_interval(struct device *d,
 		goto out;
 	}
 	if (new_value < 0) {
-		pr_err("%s: Invalid arp_interval value %d not in range 1-%d; rejected.\n",
+		pr_err("%s: Invalid arp_interval value %d not in range 0-%d; rejected.\n",
 		       bond->dev->name, new_value, INT_MAX);
 		ret = -EINVAL;
 		goto out;
@@ -542,14 +542,15 @@ static ssize_t bonding_store_arp_interval(struct device *d,
 	pr_info("%s: Setting ARP monitoring interval to %d.\n",
 		bond->dev->name, new_value);
 	bond->params.arp_interval = new_value;
-	if (bond->params.miimon) {
-		pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n",
-			bond->dev->name, bond->dev->name);
-		bond->params.miimon = 0;
-	}
-	if (!bond->params.arp_targets[0]) {
-		pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n",
-			bond->dev->name);
+	if (new_value) {
+		if (bond->params.miimon) {
+			pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n",
+				bond->dev->name, bond->dev->name);
+			bond->params.miimon = 0;
+		}
+		if (!bond->params.arp_targets[0])
+			pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n",
+				bond->dev->name);
 	}
 	if (bond->dev->flags & IFF_UP) {
 		/* If the interface is up, we may need to fire off
@@ -557,10 +558,13 @@ static ssize_t bonding_store_arp_interval(struct device *d,
 		 * timer will get fired off when the open function
 		 * is called.
 		 */
-		cancel_delayed_work_sync(&bond->mii_work);
-		queue_delayed_work(bond->wq, &bond->arp_work, 0);
+		if (!new_value) {
+			cancel_delayed_work_sync(&bond->arp_work);
+		} else {
+			cancel_delayed_work_sync(&bond->mii_work);
+			queue_delayed_work(bond->wq, &bond->arp_work, 0);
+		}
 	}
-
 out:
 	rtnl_unlock();
 	return ret;
@@ -702,7 +706,7 @@ static ssize_t bonding_store_downdelay(struct device *d,
 	}
 	if (new_value < 0) {
 		pr_err("%s: Invalid down delay value %d not in range %d-%d; rejected.\n",
-		       bond->dev->name, new_value, 1, INT_MAX);
+		       bond->dev->name, new_value, 0, INT_MAX);
 		ret = -EINVAL;
 		goto out;
 	} else {
@@ -757,8 +761,8 @@ static ssize_t bonding_store_updelay(struct device *d,
 		goto out;
 	}
 	if (new_value < 0) {
-		pr_err("%s: Invalid down delay value %d not in range %d-%d; rejected.\n",
-		       bond->dev->name, new_value, 1, INT_MAX);
+		pr_err("%s: Invalid up delay value %d not in range %d-%d; rejected.\n",
+		       bond->dev->name, new_value, 0, INT_MAX);
 		ret = -EINVAL;
 		goto out;
 	} else {
@@ -968,37 +972,37 @@ static ssize_t bonding_store_miimon(struct device *d,
 	}
 	if (new_value < 0) {
 		pr_err("%s: Invalid miimon value %d not in range %d-%d; rejected.\n",
-		       bond->dev->name, new_value, 1, INT_MAX);
+		       bond->dev->name, new_value, 0, INT_MAX);
 		ret = -EINVAL;
 		goto out;
-	} else {
-		pr_info("%s: Setting MII monitoring interval to %d.\n",
-			bond->dev->name, new_value);
-		bond->params.miimon = new_value;
-		if (bond->params.updelay)
-			pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n",
-				bond->dev->name,
-				bond->params.updelay * bond->params.miimon);
-		if (bond->params.downdelay)
-			pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n",
-				bond->dev->name,
-				bond->params.downdelay * bond->params.miimon);
-		if (bond->params.arp_interval) {
-			pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n",
-				bond->dev->name);
-			bond->params.arp_interval = 0;
-			if (bond->params.arp_validate) {
-				bond->params.arp_validate =
-					BOND_ARP_VALIDATE_NONE;
-			}
-		}
-
-		if (bond->dev->flags & IFF_UP) {
-			/* If the interface is up, we may need to fire off
-			 * the MII timer. If the interface is down, the
-			 * timer will get fired off when the open function
-			 * is called.
-			 */
+	}
+	pr_info("%s: Setting MII monitoring interval to %d.\n",
+		bond->dev->name, new_value);
+	bond->params.miimon = new_value;
+	if (bond->params.updelay)
+		pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n",
+			bond->dev->name,
+			bond->params.updelay * bond->params.miimon);
+	if (bond->params.downdelay)
+		pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n",
+			bond->dev->name,
+			bond->params.downdelay * bond->params.miimon);
+	if (new_value && bond->params.arp_interval) {
+		pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n",
+			bond->dev->name);
+		bond->params.arp_interval = 0;
+		if (bond->params.arp_validate)
+			bond->params.arp_validate = BOND_ARP_VALIDATE_NONE;
+	}
+	if (bond->dev->flags & IFF_UP) {
+		/* If the interface is up, we may need to fire off
+		 * the MII timer. If the interface is down, the
+		 * timer will get fired off when the open function
+		 * is called.
+		 */
+		if (!new_value) {
+			cancel_delayed_work_sync(&bond->mii_work);
+		} else {
 			cancel_delayed_work_sync(&bond->arp_work);
 			queue_delayed_work(bond->wq, &bond->mii_work, 0);
 		}
diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig
index b39ca5b3ea7..ff2ba86cd4a 100644
--- a/drivers/net/can/sja1000/Kconfig
+++ b/drivers/net/can/sja1000/Kconfig
@@ -46,6 +46,7 @@ config CAN_EMS_PCI
 config CAN_PEAK_PCMCIA
 	tristate "PEAK PCAN-PC Card"
 	depends on PCMCIA
+	depends on HAS_IOPORT
 	---help---
 	  This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
 	  from PEAK-System (http://www.peak-system.com). To compile this
diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c
index a042cdc260d..3c18d7d000e 100644
--- a/drivers/net/can/sja1000/plx_pci.c
+++ b/drivers/net/can/sja1000/plx_pci.c
@@ -348,7 +348,7 @@ static inline int plx_pci_check_sja1000(const struct sja1000_priv *priv)
 	 */
 	if ((priv->read_reg(priv, REG_CR) & REG_CR_BASICCAN_INITIAL_MASK) ==
 	    REG_CR_BASICCAN_INITIAL &&
-	    (priv->read_reg(priv, REG_SR) == REG_SR_BASICCAN_INITIAL) &&
+	    (priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_BASICCAN_INITIAL) &&
 	    (priv->read_reg(priv, REG_IR) == REG_IR_BASICCAN_INITIAL))
 		flag = 1;
 
@@ -360,7 +360,7 @@ static inline int plx_pci_check_sja1000(const struct sja1000_priv *priv)
 	 * See states on p. 23 of the Datasheet.
 	 */
 	if (priv->read_reg(priv, REG_MOD) == REG_MOD_PELICAN_INITIAL &&
-	    priv->read_reg(priv, REG_SR) == REG_SR_PELICAN_INITIAL &&
+	    priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_PELICAN_INITIAL &&
 	    priv->read_reg(priv, REG_IR) == REG_IR_PELICAN_INITIAL)
 		return flag;
 
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index daf4013a8fc..e4df307eaa9 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -92,7 +92,7 @@ static void sja1000_write_cmdreg(struct sja1000_priv *priv, u8 val)
 	 */
 	spin_lock_irqsave(&priv->cmdreg_lock, flags);
 	priv->write_reg(priv, REG_CMR, val);
-	priv->read_reg(priv, REG_SR);
+	priv->read_reg(priv, SJA1000_REG_SR);
 	spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
 }
 
@@ -502,7 +502,7 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
 
 	while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) {
 		n++;
-		status = priv->read_reg(priv, REG_SR);
+		status = priv->read_reg(priv, SJA1000_REG_SR);
 		/* check for absent controller due to hw unplug */
 		if (status == 0xFF && sja1000_is_absent(priv))
 			return IRQ_NONE;
@@ -530,7 +530,7 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
 			/* receive interrupt */
 			while (status & SR_RBS) {
 				sja1000_rx(dev);
-				status = priv->read_reg(priv, REG_SR);
+				status = priv->read_reg(priv, SJA1000_REG_SR);
 				/* check for absent controller */
 				if (status == 0xFF && sja1000_is_absent(priv))
 					return IRQ_NONE;
diff --git a/drivers/net/can/sja1000/sja1000.h b/drivers/net/can/sja1000/sja1000.h
index afa99847a51..aa48e053da2 100644
--- a/drivers/net/can/sja1000/sja1000.h
+++ b/drivers/net/can/sja1000/sja1000.h
@@ -56,7 +56,7 @@
 /* SJA1000 registers - manual section 6.4 (Pelican Mode) */
 #define REG_MOD		0x00
 #define REG_CMR		0x01
-#define REG_SR		0x02
+#define SJA1000_REG_SR		0x02
 #define REG_IR		0x03
 #define REG_IER		0x04
 #define REG_ALC		0x0B
diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e.h b/drivers/net/ethernet/atheros/atl1e/atl1e.h
index 829b5ad71d0..b5fd934585e 100644
--- a/drivers/net/ethernet/atheros/atl1e/atl1e.h
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e.h
@@ -186,7 +186,7 @@ struct atl1e_tpd_desc {
 /* how about 0x2000 */
 #define MAX_TX_BUF_LEN      0x2000
 #define MAX_TX_BUF_SHIFT    13
-/*#define MAX_TX_BUF_LEN  0x3000 */
+#define MAX_TSO_SEG_SIZE    0x3c00
 
 /* rrs word 1 bit 0:31 */
 #define RRS_RX_CSUM_MASK	0xFFFF
@@ -438,7 +438,6 @@ struct atl1e_adapter {
 	struct atl1e_hw        hw;
 	struct atl1e_hw_stats  hw_stats;
 
-	bool have_msi;
 	u32 wol;
 	u16 link_speed;
 	u16 link_duplex;
diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
index 92f4734f860..ac25f05ff68 100644
--- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
@@ -1849,34 +1849,19 @@ static void atl1e_free_irq(struct atl1e_adapter *adapter)
 	struct net_device *netdev = adapter->netdev;
 
 	free_irq(adapter->pdev->irq, netdev);
-
-	if (adapter->have_msi)
-		pci_disable_msi(adapter->pdev);
 }
 
 static int atl1e_request_irq(struct atl1e_adapter *adapter)
 {
 	struct pci_dev    *pdev   = adapter->pdev;
 	struct net_device *netdev = adapter->netdev;
-	int flags = 0;
 	int err = 0;
 
-	adapter->have_msi = true;
-	err = pci_enable_msi(pdev);
-	if (err) {
-		netdev_dbg(netdev,
-			   "Unable to allocate MSI interrupt Error: %d\n", err);
-		adapter->have_msi = false;
-	}
-
-	if (!adapter->have_msi)
-		flags |= IRQF_SHARED;
-	err = request_irq(pdev->irq, atl1e_intr, flags, netdev->name, netdev);
+	err = request_irq(pdev->irq, atl1e_intr, IRQF_SHARED, netdev->name,
+			  netdev);
 	if (err) {
 		netdev_dbg(adapter->netdev,
 			   "Unable to allocate interrupt Error: %d\n", err);
-		if (adapter->have_msi)
-			pci_disable_msi(pdev);
 		return err;
 	}
 	netdev_dbg(netdev, "atl1e_request_irq OK\n");
@@ -2344,6 +2329,7 @@ static int atl1e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	INIT_WORK(&adapter->reset_task, atl1e_reset_task);
 	INIT_WORK(&adapter->link_chg_task, atl1e_link_chg_task);
+	netif_set_gso_max_size(netdev, MAX_TSO_SEG_SIZE);
 	err = register_netdev(netdev);
 	if (err) {
 		netdev_err(netdev, "register netdevice failed\n");
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index 77ebae0ac64..0283f343b0d 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -13437,13 +13437,7 @@ static void bnx2x_check_kr2_wa(struct link_params *params,
 {
 	struct bnx2x *bp = params->bp;
 	u16 base_page, next_page, not_kr2_device, lane;
-	int sigdet = bnx2x_warpcore_get_sigdet(phy, params);
-
-	if (!sigdet) {
-		if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE))
-			bnx2x_kr2_recovery(params, vars, phy);
-		return;
-	}
+	int sigdet;
 
 	/* Once KR2 was disabled, wait 5 seconds before checking KR2 recovery
 	 * since some switches tend to reinit the AN process and clear the
@@ -13454,6 +13448,16 @@ static void bnx2x_check_kr2_wa(struct link_params *params,
 		vars->check_kr2_recovery_cnt--;
 		return;
 	}
+
+	sigdet = bnx2x_warpcore_get_sigdet(phy, params);
+	if (!sigdet) {
+		if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) {
+			bnx2x_kr2_recovery(params, vars, phy);
+			DP(NETIF_MSG_LINK, "No sigdet\n");
+		}
+		return;
+	}
+
 	lane = bnx2x_get_warpcore_lane(phy, params);
 	CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
 			  MDIO_AER_BLOCK_AER_REG, lane);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index e81a747ea8c..8e58da909f5 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -4947,7 +4947,7 @@ static void bnx2x_after_function_update(struct bnx2x *bp)
 				  q);
 	}
 
-	if (!NO_FCOE(bp)) {
+	if (!NO_FCOE(bp) && CNIC_ENABLED(bp)) {
 		fp = &bp->fp[FCOE_IDX(bp)];
 		queue_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj;
 
@@ -13354,6 +13354,7 @@ static int bnx2x_unregister_cnic(struct net_device *dev)
 	RCU_INIT_POINTER(bp->cnic_ops, NULL);
 	mutex_unlock(&bp->cnic_mutex);
 	synchronize_rcu();
+	bp->cnic_enabled = false;
 	kfree(bp->cnic_kwq);
 	bp->cnic_kwq = NULL;
 
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 67d2663b397..17a972734ba 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -14604,8 +14604,11 @@ static void tg3_read_vpd(struct tg3 *tp)
 		if (j + len > block_end)
 			goto partno;
 
-		memcpy(tp->fw_ver, &vpd_data[j], len);
-		strncat(tp->fw_ver, " bc ", vpdlen - len - 1);
+		if (len >= sizeof(tp->fw_ver))
+			len = sizeof(tp->fw_ver) - 1;
+		memset(tp->fw_ver, 0, sizeof(tp->fw_ver));
+		snprintf(tp->fw_ver, sizeof(tp->fw_ver), "%.*s bc ", len,
+			 &vpd_data[j]);
 	}
 
 partno:
diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c
index a170065b597..b0ebc9f6d55 100644
--- a/drivers/net/ethernet/calxeda/xgmac.c
+++ b/drivers/net/ethernet/calxeda/xgmac.c
@@ -163,6 +163,7 @@
 #define XGMAC_FLOW_CTRL_FCB_BPA	0x00000001	/* Flow Control Busy ... */
 
 /* XGMAC_INT_STAT reg */
+#define XGMAC_INT_STAT_PMTIM	0x00800000	/* PMT Interrupt Mask */
 #define XGMAC_INT_STAT_PMT	0x0080		/* PMT Interrupt Status */
 #define XGMAC_INT_STAT_LPI	0x0040		/* LPI Interrupt Status */
 
@@ -960,6 +961,9 @@ static int xgmac_hw_init(struct net_device *dev)
 	writel(DMA_INTR_DEFAULT_MASK, ioaddr + XGMAC_DMA_STATUS);
 	writel(DMA_INTR_DEFAULT_MASK, ioaddr + XGMAC_DMA_INTR_ENA);
 
+	/* Mask power mgt interrupt */
+	writel(XGMAC_INT_STAT_PMTIM, ioaddr + XGMAC_INT_STAT);
+
 	/* XGMAC requires AXI bus init. This is a 'magic number' for now */
 	writel(0x0077000E, ioaddr + XGMAC_DMA_AXI_BUS);
 
@@ -1141,6 +1145,9 @@ static int xgmac_rx(struct xgmac_priv *priv, int limit)
 		struct sk_buff *skb;
 		int frame_len;
 
+		if (!dma_ring_cnt(priv->rx_head, priv->rx_tail, DMA_RX_RING_SZ))
+			break;
+
 		entry = priv->rx_tail;
 		p = priv->dma_rx + entry;
 		if (desc_get_owner(p))
@@ -1825,7 +1832,7 @@ static void xgmac_pmt(void __iomem *ioaddr, unsigned long mode)
 	unsigned int pmt = 0;
 
 	if (mode & WAKE_MAGIC)
-		pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_MAGIC_PKT;
+		pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_MAGIC_PKT_EN;
 	if (mode & WAKE_UCAST)
 		pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_GLBL_UNICAST;
 
diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c
index 8cdf02503d1..9eada8e8607 100644
--- a/drivers/net/ethernet/davicom/dm9000.c
+++ b/drivers/net/ethernet/davicom/dm9000.c
@@ -257,6 +257,107 @@ static void dm9000_dumpblk_32bit(void __iomem *reg, int count)
 		tmp = readl(reg);
 }
 
+/*
+ * Sleep, either by using msleep() or if we are suspending, then
+ * use mdelay() to sleep.
+ */
+static void dm9000_msleep(board_info_t *db, unsigned int ms)
+{
+	if (db->in_suspend)
+		mdelay(ms);
+	else
+		msleep(ms);
+}
+
+/* Read a word from phyxcer */
+static int
+dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
+{
+	board_info_t *db = netdev_priv(dev);
+	unsigned long flags;
+	unsigned int reg_save;
+	int ret;
+
+	mutex_lock(&db->addr_lock);
+
+	spin_lock_irqsave(&db->lock, flags);
+
+	/* Save previous register address */
+	reg_save = readb(db->io_addr);
+
+	/* Fill the phyxcer register into REG_0C */
+	iow(db, DM9000_EPAR, DM9000_PHY | reg);
+
+	/* Issue phyxcer read command */
+