pcmcia: re-work pcmcia_request_irq()

Instead of the old pcmcia_request_irq() interface, drivers may now
choose between:

- calling request_irq/free_irq directly. Use the IRQ from *p_dev->irq.

- use pcmcia_request_irq(p_dev, handler_t); the PCMCIA core will
  clean up automatically on calls to pcmcia_disable_device() or
  device ejection.

- drivers still not capable of IRQF_SHARED (or not telling us so) may
  use the deprecated pcmcia_request_exclusive_irq() for the time
  being; they might receive a shared IRQ nonetheless.

CC: linux-bluetooth@vger.kernel.org
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-serial@vger.kernel.org
CC: alsa-devel@alsa-project.org
CC: linux-usb@vger.kernel.org
CC: linux-ide@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

19 files changed, 56 insertions, 175 deletions

diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 757f87bb1db..14428317c00 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -283,8 +283,6 @@ static int tc574_probe(struct pcmcia_device *link)
 	spin_lock_init(&lp->window_lock);
 	link->io.NumPorts1 = 32;
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	link->irq.Handler = &el3_interrupt;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 	link->conf.ConfigIndex = 1;
@@ -353,7 +351,7 @@ static int tc574_config(struct pcmcia_device *link)
 	if (i != 0)
 		goto failed;
 
-	ret = pcmcia_request_irq(link, &link->irq);
+	ret = pcmcia_request_irq(link, el3_interrupt);
 	if (ret)
 		goto failed;
 
@@ -361,7 +359,7 @@ static int tc574_config(struct pcmcia_device *link)
 	if (ret)
 		goto failed;
 
-	dev->irq = link->irq.AssignedIRQ;
+	dev->irq = link->irq;
 	dev->base_addr = link->io.BasePort1;
 
 	ioaddr = dev->base_addr;
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index 091e0b00043..405d772bfde 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -194,8 +194,7 @@ static int tc589_probe(struct pcmcia_device *link)
     spin_lock_init(&lp->lock);
     link->io.NumPorts1 = 16;
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-    link->irq.Handler = &el3_interrupt;
+
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
@@ -271,7 +270,7 @@ static int tc589_config(struct pcmcia_device *link)
     if (i != 0)
 	goto failed;
 
-    ret = pcmcia_request_irq(link, &link->irq);
+    ret = pcmcia_request_irq(link, el3_interrupt);
     if (ret)
 	    goto failed;
 
@@ -279,7 +278,7 @@ static int tc589_config(struct pcmcia_device *link)
     if (ret)
 	    goto failed;
 	
-    dev->irq = link->irq.AssignedIRQ;
+    dev->irq = link->irq;
     dev->base_addr = link->io.BasePort1;
     ioaddr = dev->base_addr;
     EL3WINDOW(0);
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 9f3d593f14e..967547a84b4 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -168,7 +168,6 @@ static int axnet_probe(struct pcmcia_device *link)
     info = PRIV(dev);
     info->p_dev = link;
     link->priv = dev;
-    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -265,12 +264,9 @@ static int try_io_port(struct pcmcia_device *link)
     int j, ret;
     if (link->io.NumPorts1 == 32) {
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-	if (link->io.NumPorts2 > 0) {
-	    /* for master/slave multifunction cards */
+	/* for master/slave multifunction cards */
+	if (link->io.NumPorts2 > 0)
 	    link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
-	    link->irq.Attributes =
-		IRQ_TYPE_DYNAMIC_SHARING;
-	}
     } else {
 	/* This should be two 16-port windows */
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
@@ -336,8 +332,7 @@ static int axnet_config(struct pcmcia_device *link)
     if (ret != 0)
 	goto failed;
 
-    ret = pcmcia_request_irq(link, &link->irq);
-    if (ret)
+    if (!link->irq)
 	    goto failed;
     
     if (link->io.NumPorts2 == 8) {
@@ -349,7 +344,7 @@ static int axnet_config(struct pcmcia_device *link)
     if (ret)
 	    goto failed;
 
-    dev->irq = link->irq.AssignedIRQ;
+    dev->irq = link->irq;
     dev->base_addr = link->io.BasePort1;
 
     if (!get_prom(link)) {
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index 21d9c9d815d..278438beb91 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -163,7 +163,6 @@ static int com20020_probe(struct pcmcia_device *p_dev)
     p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
     p_dev->io.NumPorts1 = 16;
     p_dev->io.IOAddrLines = 16;
-    p_dev->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
     p_dev->conf.Attributes = CONF_ENABLE_IRQ;
     p_dev->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -275,15 +274,14 @@ static int com20020_config(struct pcmcia_device *link)
     dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);
 
     dev_dbg(&link->dev, "request IRQ %d\n",
-	    link->irq.AssignedIRQ);
-    i = pcmcia_request_irq(link, &link->irq);
-    if (i != 0)
+	    link->irq);
+    if (!link->irq)
     {
 	dev_dbg(&link->dev, "requestIRQ failed totally!\n");
 	goto failed;
     }
 
-    dev->irq = link->irq.AssignedIRQ;
+    dev->irq = link->irq;
 
     ret = pcmcia_request_configuration(link, &link->conf);
     if (ret)
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index b9dc80b9d04..31f1a037737 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -254,10 +254,6 @@ static int fmvj18x_probe(struct pcmcia_device *link)
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
     link->io.IOAddrLines = 5;
 
-    /* Interrupt setup */
-    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-    link->irq.Handler = fjn_interrupt;
-
     /* General socket configuration */
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
@@ -425,8 +421,6 @@ static int fmvj18x_config(struct pcmcia_device *link)
     }
 
     if (link->io.NumPorts2 != 0) {
-    	link->irq.Attributes =
-		IRQ_TYPE_DYNAMIC_SHARING;
 	ret = mfc_try_io_port(link);
 	if (ret != 0) goto failed;
     } else if (cardtype == UNGERMANN) {
@@ -437,14 +431,14 @@ static int fmvj18x_config(struct pcmcia_device *link)
 	    if (ret)
 		    goto failed;
     }
-    ret = pcmcia_request_irq(link, &link->irq);
+    ret = pcmcia_request_irq(link, fjn_interrupt);
     if (ret)
 	    goto failed;
     ret = pcmcia_request_configuration(link, &link->conf);
     if (ret)
 	    goto failed;
 
-    dev->irq = link->irq.AssignedIRQ;
+    dev->irq = link->irq;
     dev->base_addr = link->io.BasePort1;
 
     if (link->io.BasePort2 != 0) {
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index 37f4a6fdc3e..0225cdffa4b 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -156,8 +156,6 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link)
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
     link->io.NumPorts1 = 4;
     link->io.IOAddrLines = 16;
-    link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-    link->irq.Handler = ibmtr_interrupt;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.Present = PRESENT_OPTION;
@@ -238,11 +236,11 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
     }
     dev->base_addr = link->io.BasePort1;
 
-    ret = pcmcia_request_irq(link, &link->irq);
+    ret = pcmcia_request_exclusive_irq(link, ibmtr_interrupt);
     if (ret)
 	    goto failed;
-    dev->irq = link->irq.AssignedIRQ;
-    ti->irq = link->irq.AssignedIRQ;
+    dev->irq = link->irq;
+    ti->irq = link->irq;
     ti->global_int_enable=GLOBAL_INT_ENABLE+((dev->irq==9) ? 2 : dev->irq);
 
     /* Allocate the MMIO memory window */
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index c717b143f11..b779e3a0b4d 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -463,8 +463,6 @@ static int nmclan_probe(struct pcmcia_device *link)
     link->io.NumPorts1 = 32;
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
     link->io.IOAddrLines = 5;
-    link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-    link->irq.Handler = mace_interrupt;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
@@ -652,14 +650,14 @@ static int nmclan_config(struct pcmcia_device *link)
   ret = pcmcia_request_io(link, &link->io);
   if (ret)
 	  goto failed;
-  ret = pcmcia_request_irq(link, &link->irq);
+  ret = pcmcia_request_exclusive_irq(link, mace_interrupt);
   if (ret)
 	  goto failed;
   ret = pcmcia_request_configuration(link, &link->conf);
   if (ret)
 	  goto failed;
 
-  dev->irq = link->irq.AssignedIRQ;
+  dev->irq = link->irq;
   dev->base_addr = link->io.BasePort1;
 
   ioaddr = dev->base_addr;
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 4c0368de181..af09be48757 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -264,7 +264,6 @@ static int pcnet_probe(struct pcmcia_device *link)
     info->p_dev = link;
     link->priv = dev;
 
-    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -488,8 +487,6 @@ static int try_io_port(struct pcmcia_device *link)
 	if (link->io.NumPorts2 > 0) {
 	    /* for master/slave multifunction cards */
 	    link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
-	    link->irq.Attributes =
-		IRQ_TYPE_DYNAMIC_SHARING;
 	}
     } else {
 	/* This should be two 16-port windows */
@@ -559,8 +556,7 @@ static int pcnet_config(struct pcmcia_device *link)
     if (ret)
 	goto failed;
 
-    ret = pcmcia_request_irq(link, &link->irq);
-    if (ret)
+    if (!link->irq)
 	    goto failed;
 
     if (link->io.NumPorts2 == 8) {
@@ -574,7 +570,7 @@ static int pcnet_config(struct pcmcia_device *link)
     ret = pcmcia_request_configuration(link, &link->conf);
     if (ret)
 	    goto failed;
-    dev->irq = link->irq.AssignedIRQ;
+    dev->irq = link->irq;
     dev->base_addr = link->io.BasePort1;
     if (info->flags & HAS_MISC_REG) {
 	if ((if_port == 1) || (if_port == 2))
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index ccc553782a0..ad061c7106b 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -329,8 +329,6 @@ static int smc91c92_probe(struct pcmcia_device *link)
     link->io.NumPorts1 = 16;
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
     link->io.IOAddrLines = 4;
-    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-    link->irq.Handler = &smc_interrupt;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -453,7 +451,6 @@ static int mhz_mfc_config(struct pcmcia_device *link)
 
     link->conf.Attributes |= CONF_ENABLE_SPKR;
     link->conf.Status = CCSR_AUDIO_ENA;
-    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
     link->io.IOAddrLines = 16;
     link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
     link->io.NumPorts2 = 8;
@@ -652,7 +649,6 @@ static int osi_config(struct pcmcia_device *link)
 
     link->conf.Attributes |= CONF_ENABLE_SPKR;
     link->conf.Status = CCSR_AUDIO_ENA;
-    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
     link->io.NumPorts1 = 64;
     link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
     link->io.NumPorts2 = 8;
@@ -877,7 +873,7 @@ static int smc91c92_config(struct pcmcia_device *link)
     if (i)
 	    goto config_failed;
 
-    i = pcmcia_request_irq(link, &link->irq);
+    i = pcmcia_request_irq(link, smc_interrupt);
     if (i)
 	    goto config_failed;
     i = pcmcia_request_configuration(link, &link->conf);
@@ -887,7 +883,7 @@ static int smc91c92_config(struct pcmcia_device *link)
     if (smc->manfid == MANFID_MOTOROLA)
 	mot_config(link);
 
-    dev->irq = link->irq.AssignedIRQ;
+    dev->irq = link->irq;
 
     if ((if_port >= 0) && (if_port <= 2))
 	dev->if_port = if_port;
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index 4d1802e457b..c9e7d7d4783 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -555,7 +555,6 @@ xirc2ps_probe(struct pcmcia_device *link)
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
-    link->irq.Handler = xirc2ps_interrupt;
 
     /* Fill in card specific entries */
     dev->netdev_ops = &netdev_ops;
@@ -841,7 +840,6 @@ xirc2ps_config(struct pcmcia_device * link)
 	    link->conf.Attributes |= CONF_ENABLE_SPKR;
 	    link->conf.Status |= CCSR_AUDIO_ENA;
 	}
-	link->irq.Attributes |= IRQ_TYPE_DYNAMIC_SHARING;
 	link->io.NumPorts2 = 8;
 	link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
 	if (local->dingo) {
@@ -866,7 +864,6 @@ xirc2ps_config(struct pcmcia_device * link)
 	}
 	printk(KNOT_XIRC "no ports available\n");
     } else {
-	link->irq.Attributes |= IRQ_TYPE_DYNAMIC_SHARING;
 	link->io.NumPorts1 = 16;
 	for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
 	    link->io.BasePort1 = ioaddr;
@@ -885,7 +882,7 @@ xirc2ps_config(struct pcmcia_device * link)
      * Now allocate an interrupt line.	Note that this does not
      * actually assign a handler to the interrupt.
      */
-    if ((err=pcmcia_request_irq(link, &link->irq)))
+    if ((err=pcmcia_request_irq(link, xirc2ps_interrupt)))
 	goto config_error;
 
     /****************
@@ -982,7 +979,7 @@ xirc2ps_config(struct pcmcia_device * link)
 	printk(KNOT_XIRC "invalid if_port requested\n");
 
     /* we can now register the device with the net subsystem */
-    dev->irq = link->irq.AssignedIRQ;
+    dev->irq = link->irq;
     dev->base_addr = link->io.BasePort1;
 
     if (local->dingo)
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index f6036fb4231..7867c51be15 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -132,10 +132,6 @@ static int airo_probe(struct pcmcia_device *p_dev)
 
 	dev_dbg(&p_dev->dev, "airo_attach()\n");
 
-	/* Interrupt setup */
-	p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	p_dev->irq.Handler = NULL;
-
 	/*
 	  General socket configuration defaults can go here.  In this
 	  client, we assume very little, and rely on the CIS for almost
@@ -212,9 +208,7 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
 	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
 
-	/* Do we need to allocate an interrupt? */
-	if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
-		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@@ -300,16 +294,8 @@ static int airo_config(struct pcmcia_device *link)
 	if (ret)
 		goto failed;
 
-	/*
-	  Allocate an interrupt line.  Note that this does not assign a
-	  handler to the interrupt, unless the 'Handler' member of the
-	  irq structure is initialized.
-	*/
-	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
-		ret = pcmcia_request_irq(link, &link->irq);
-		if (ret)
-			goto failed;
-	}
+	if (!link->irq)
+		goto failed;
 
 	/*
 	  This actually configures the PCMCIA socket -- setting up
@@ -320,7 +306,7 @@ static int airo_config(struct pcmcia_device *link)
 	if (ret)
 		goto failed;
 	((local_info_t *)link->priv)->eth_dev =
-		init_airo_card(link->irq.AssignedIRQ,
+		init_airo_card(link->irq,
 			       link->io.BasePort1, 1, &link->dev);
 	if (!((local_info_t *)link->priv)->eth_dev)
 		goto failed;
@@ -338,8 +324,7 @@ static int airo_config(struct pcmcia_device *link)
 	       dev->node.dev_name, link->conf.ConfigIndex);
 	if (link->conf.Vpp)
 		printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
-	if (link->conf.Attributes & CONF_ENABLE_IRQ)
-		printk(", irq %d", link->irq.AssignedIRQ);
+	printk(", irq %d", link->irq);
 	if (link->io.NumPorts1)
 		printk(", io 0x%04x-0x%04x", link->io.BasePort1,
 		       link->io.BasePort1+link->io.NumPorts1-1);
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 32407911842..759cdc41932 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -141,10 +141,6 @@ static int atmel_probe(struct pcmcia_device *p_dev)
 
 	dev_dbg(&p_dev->dev, "atmel_attach()\n");
 
-	/* Interrupt setup */
-	p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	p_dev->irq.Handler = NULL;
-
 	/*
 	  General socket configuration defaults can go here.  In this
 	  client, we assume very little, and rely on the CIS for almost
@@ -226,9 +222,7 @@ static int atmel_config_check(struct pcmcia_device *p_dev,
 	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
 
-	/* Do we need to allocate an interrupt? */
-	if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
-		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@@ -278,15 +272,9 @@ static int atmel_config(struct pcmcia_device *link)
 	if (pcmcia_loop_config(link, atmel_config_check, NULL))
 		goto failed;
 
-	/*
-	  Allocate an interrupt line.  Note that this does not assign a
-	  handler to the interrupt, unless the 'Handler' member of the
-	  irq structure is initialized.
-	*/
-	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
-		ret = pcmcia_request_irq(link, &link->irq);
-		if (ret)
-			goto failed;
+	if (!link->irq) {
+		dev_err(&link->dev, "atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config.");
+		goto failed;
 	}
 
 	/*
@@ -298,14 +286,8 @@ static int atmel_config(struct pcmcia_device *link)
 	if (ret)
 		goto failed;
 
-	if (link->irq.AssignedIRQ == 0) {
-		printk(KERN_ALERT
-		       "atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config.");
-		goto failed;
-	}
-
 	((local_info_t*)link->priv)->eth_dev =
-		init_atmel_card(link->irq.AssignedIRQ,
+		init_atmel_card(link->irq,
 				link->io.BasePort1,
 				did ? did->driver_info : ATMEL_FW_TYPE_NONE,
 				&link->dev,
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index 609e7051e01..0e99b634267 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -98,10 +98,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 	if (res != 0)
 		goto err_disable;
 
-	dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	dev->irq.Handler = NULL; /* The handler is registered later. */
-	res = pcmcia_request_irq(dev, &dev->irq);
-	if (res != 0)
+	if (!dev->irq)
 		goto err_disable;
 
 	res = pcmcia_request_configuration(dev, &dev->conf);
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index a36501dbbe0..5e2efbb0367 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -556,15 +556,7 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
 		p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 
 	/* Do we need to allocate an interrupt? */
-	if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
-		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
-	else if (!(p_dev->conf.Attributes & CONF_ENABLE_IRQ)) {
-		/* At least Compaq WL200 does not have IRQInfo1 set,
-		 * but it does not work without interrupts.. */
-		printk(KERN_WARNING "Config has no IRQ info, but trying to "
-		       "enable IRQ anyway..\n");
-		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
-	}
+	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
@@ -636,18 +628,9 @@ static int prism2_config(struct pcmcia_device *link)
 	strcpy(hw_priv->node.dev_name, dev->name);
 	link->dev_node = &hw_priv->node;
 
-	/*
-	 * Allocate an interrupt line.  Note that this does not assign a
-	 * handler to the interrupt, unless the 'Handler' member of the
-	 * irq structure is initialized.
-	 */
-	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
-		link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-		link->irq.Handler = prism2_interrupt;
-		ret = pcmcia_request_irq(link, &link->irq);
-		if (ret)
-			goto failed;
-	}
+	ret = pcmcia_request_irq(link, prism2_interrupt);
+	if (ret)
+		goto failed;
 
 	/*
 	 * This actually configures the PCMCIA socket -- setting up
@@ -658,7 +641,7 @@ static int prism2_config(struct pcmcia_device *link)
 	if (ret)
 		goto failed;
 
-	dev->irq = link->irq.AssignedIRQ;
+	dev->irq = link->irq;
 	dev->base_addr = link->io.BasePort1;
 
 	/* Finally, report what we've done */
@@ -668,7 +651,7 @@ static int prism2_config(struct pcmcia_device *link)
 		printk(", Vpp %d.%d", link->conf.Vpp / 10,
 		       link->conf.Vpp % 10);
 	if (link->conf.Attributes & CONF_ENABLE_IRQ)
-		printk(", irq %d", link->irq.AssignedIRQ);
+		printk(", irq %d", link->irq);
 	if (link->io.NumPorts1)
 		printk(", io 0x%04x-0x%04x", link->io.BasePort1,
 		       link->io.BasePort1+link->io.NumPorts1-1);
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 6d55439a7b9..08e4e390800 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -777,7 +777,7 @@ static void if_cs_release(struct pcmcia_device *p_dev)
 
 	lbs_deb_enter(LBS_DEB_CS);
 
-	free_irq(p_dev->irq.AssignedIRQ, card);
+	free_irq(p_dev->irq, card);
 	pcmcia_disable_device(p_dev);
 	if (card->iobase)
 		ioport_unmap(card->iobase);
@@ -807,8 +807,7 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev,
 	p_dev->io.NumPorts1 = cfg->io.win[0].len;
 
 	/* Do we need to allocate an interrupt? */
-	if (cfg->irq.IRQInfo1)
-		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	if (cfg->io.nwin != 1) {
@@ -837,9 +836,6 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 	card->p_dev = p_dev;
 	p_dev->priv = card;
 
-	p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	p_dev->irq.Handler = NULL;
-
 	p_dev->conf.Attributes = 0;
 	p_dev->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -854,13 +850,8 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 	 * a handler to the interrupt, unless the 'Handler' member of
 	 * the irq structure is initialized.
 	 */
-	if (p_dev->conf.Attributes & CONF_ENABLE_IRQ) {
-		ret = pcmcia_request_irq(p_dev, &p_dev->irq);
-		if (ret) {
-			lbs_pr_err("error in pcmcia_request_irq\n");
-			goto out1;
-		}
-	}
+	if (!p_dev->irq)
+		goto out1;
 
 	/* Initialize io access */
 	card->iobase = ioport_map(p_dev->io.BasePort1, p_dev->io.NumPorts1);
@@ -883,7 +874,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 
 	/* Finally, report what we've done */
 	lbs_deb_cs("irq %d, io 0x%04x-0x%04x\n",
-	       p_dev->irq.AssignedIRQ, p_dev->io.BasePort1,
+	       p_dev->irq, p_dev->io.BasePort1,
 	       p_dev->io.BasePort1 + p_dev->io.NumPorts1 - 1);
 
 	/*
@@ -940,7 +931,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 	priv->fw_ready = 1;
 
 	/* Now actually get the IRQ */
-	ret = request_irq(p_dev->irq.AssignedIRQ, if_cs_interrupt,
+	ret = request_irq(p_dev->irq, if_cs_interrupt,
 		IRQF_SHARED, DRV_NAME, card);
 	if (ret) {
 		lbs_pr_err("error in request_irq\n");
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 1d4ada188ed..5d29b11fdbc 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -119,10 +119,6 @@ orinoco_cs_probe(struct pcmcia_device *link)
 	card->p_dev = link;
 	link->priv = priv;
 
-	/* Interrupt setup */
-	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	link->irq.Handler = orinoco_interrupt;
-
 	/* General socket configuration defaults can go here.  In this
 	 * client, we assume very little, and rely on the CIS for
 	 * almost everything.  In most clients, many details (i.e.,
@@ -258,12 +254,7 @@ orinoco_cs_config(struct pcmcia_device *link)
 		goto failed;
 	}
 
-	/*
-	 * Allocate an interrupt line.  Note that this does not assign
-	 * a handler to the interrupt, unless the 'Handler' member of
-	 * the irq structure is initialized.
-	 */
-	ret = pcmcia_request_irq(link, &link->irq);
+	ret = pcmcia_request_irq(link, orinoco_interrupt);
 	if (ret)
 		goto failed;
 
@@ -296,7 +287,7 @@ orinoco_cs_config(struct pcmcia_device *link)
 
 	/* Register an interface with the stack */
 	if (orinoco_if_add(priv, link->io.BasePort1,
-			   link->irq.AssignedIRQ) != 0) {
+			   link->irq) != 0) {
 		printk(KERN_ERR PFX "orinoco_if_add() failed\n");
 		goto failed;
 	}
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index 59bda240fdc..7a8e056cd62 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -193,10 +193,6 @@ spectrum_cs_probe(struct pcmcia_device *link)
 	card->p_dev = link;
 	link->priv = priv;
 
-	/* Interrupt setup */
-	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	link->irq.Handler = orinoco_interrupt;
-
 	/* General socket configuration defaults can go here.  In this
 	 * client, we assume very little, and rely on the CIS for
 	 * almost everything.  In most clients, many details (i.e.,
@@ -332,12 +328,7 @@ spectrum_cs_config(struct pcmcia_device *link)
 		goto failed;
 	}
 
-	/*
-	 * Allocate an interrupt line.  Note that this does not assign
-	 * a handler to the interrupt, unless the 'Handler' member of
-	 * the irq structure is initialized.
-	 */
-	ret = pcmcia_request_irq(link, &link->irq);
+	ret = pcmcia_request_irq(link, orinoco_interrupt);
 	if (ret)
 		goto failed;
 
@@ -374,7 +365,7 @@ spectrum_cs_config(struct pcmcia_device *link)
 
 	/* Register an interface with the stack */
 	if (orinoco_if_add(priv, link->io.BasePort1,
-			   link->irq.AssignedIRQ) != 0) {
+			   link->irq) != 0) {
 		printk(KERN_ERR PFX "orinoco_if_add() failed\n");
 		goto failed;
 	}
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 11865ea2187..fe4642a49bf 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -321,10 +321,6 @@ static int ray_probe(struct pcmcia_device *p_dev)
 	p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 	p_dev->io.IOAddrLines = 5;
 
-	/* Interrupt setup. For PCMCIA, driver takes what's given */
-	p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	p_dev->irq.Handler = &ray_interrupt;
-
 	/* General socket configuration */
 	p_dev->conf.Attributes = CONF_ENABLE_IRQ;
 	p_dev->conf.IntType = INT_MEMORY_AND_IO;
@@ -417,10 +413,10 @@ static int ray_config(struct pcmcia_device *link)
 	/* Now allocate an interrupt line.  Note that this does not
 	   actually assign a handler to the interrupt.
 	 */
-	ret = pcmcia_request_irq(link, &link->irq);
+	ret = pcmcia_request_irq(link, ray_interrupt);
 	if (ret)
 		goto failed;
-	dev->irq = link->irq.AssignedIRQ;
+	dev->irq = link->irq;
 
 	/* This actually configures the PCMCIA socket -- setting up
 	   the I/O windows and the interrupt mapping.
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 7b9621de239..c43f05b98c4 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -1897,10 +1897,6 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
 	p_dev->io.Attributes1	= IO_DATA_PATH_WIDTH_8;
 	p_dev->io.IOAddrLines	= 5;
 
-	/* Interrupt setup */
-	p_dev->irq.Attributes	= IRQ_TYPE_DYNAMIC_SHARING;
-	p_dev->irq.Handler = wl3501_interrupt;
-
 	/* General socket configuration */
 	p_dev->conf.Attributes	= CONF_ENABLE_IRQ;
 	p_dev->conf.IntType	= INT_MEMORY_AND_IO;
@@ -1961,7 +1957,7 @@ static int wl3501_config(struct pcmcia_device *link)
 	/* Now allocate an interrupt line. Note that this does not actually
 	 * assign a handler to the interrupt. */
 
-	ret = pcmcia_request_irq(link, &link->irq);
+	ret = pcmcia_request_irq(link, wl3501_interrupt);
 	if (ret)
 		goto failed;
 
@@ -1972,7 +1968,7 @@ static int wl3501_config(struct pcmcia_device *link)
 	if (ret)
 		goto failed;
 
-	dev->irq = link->irq.AssignedIRQ;
+	dev->irq = link->irq;
 	dev->base_addr = link->io.BasePort1;
 	SET_NETDEV_DEV(dev, &link->dev);
 	if (register_netdev(dev)) {