Merge branch 'linus' into x86/xen

102 files changed, 1490 insertions, 901 deletions

diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c
index 87d8795823d..b9d097c9f6b 100644
--- a/drivers/net/3c509.c
+++ b/drivers/net/3c509.c
@@ -1062,7 +1062,6 @@ el3_rx(struct net_device *dev)
 			struct sk_buff *skb;
 
 			skb = dev_alloc_skb(pkt_len+5);
-			dev->stats.rx_bytes += pkt_len;
 			if (el3_debug > 4)
 				printk("Receiving packet size %d status %4.4x.\n",
 					   pkt_len, rx_status);
@@ -1077,6 +1076,7 @@ el3_rx(struct net_device *dev)
 				skb->protocol = eth_type_trans(skb,dev);
 				netif_rx(skb);
 				dev->last_rx = jiffies;
+				dev->stats.rx_bytes += pkt_len;
 				dev->stats.rx_packets++;
 				continue;
 			}
diff --git a/drivers/net/7990.c b/drivers/net/7990.c
index 750a46f4bc5..ad6b8a5b657 100644
--- a/drivers/net/7990.c
+++ b/drivers/net/7990.c
@@ -506,6 +506,7 @@ int lance_open (struct net_device *dev)
 
 	return res;
 }
+EXPORT_SYMBOL_GPL(lance_open);
 
 int lance_close (struct net_device *dev)
 {
@@ -521,6 +522,7 @@ int lance_close (struct net_device *dev)
 
         return 0;
 }
+EXPORT_SYMBOL_GPL(lance_close);
 
 void lance_tx_timeout(struct net_device *dev)
 {
@@ -529,7 +531,7 @@ void lance_tx_timeout(struct net_device *dev)
 	dev->trans_start = jiffies;
 	netif_wake_queue (dev);
 }
-
+EXPORT_SYMBOL_GPL(lance_tx_timeout);
 
 int lance_start_xmit (struct sk_buff *skb, struct net_device *dev)
 {
@@ -586,6 +588,7 @@ int lance_start_xmit (struct sk_buff *skb, struct net_device *dev)
 
         return 0;
 }
+EXPORT_SYMBOL_GPL(lance_start_xmit);
 
 /* taken from the depca driver via a2065.c */
 static void lance_load_multicast (struct net_device *dev)
@@ -654,6 +657,7 @@ void lance_set_multicast (struct net_device *dev)
 	if (!stopped)
 		netif_start_queue (dev);
 }
+EXPORT_SYMBOL_GPL(lance_set_multicast);
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 void lance_poll(struct net_device *dev)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index dd0ec9ebc93..f4182cfffe9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2426,7 +2426,7 @@ config CHELSIO_T3
 
 config EHEA
 	tristate "eHEA Ethernet support"
-	depends on IBMEBUS && INET && SPARSEMEM && MEMORY_HOTPLUG
+	depends on IBMEBUS && INET && SPARSEMEM
 	select INET_LRO
 	---help---
 	  This driver supports the IBM pSeries eHEA ethernet adapter.
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 6e4c80d41b0..99e0b4cdc56 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -637,22 +637,6 @@ static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw)
 }
 
 /*
- * Force the PHY into power saving mode using vendor magic.
- */
-#ifdef CONFIG_PM
-static void atl1_phy_enter_power_saving(struct atl1_hw *hw)
-{
-	atl1_write_phy_reg(hw, MII_DBG_ADDR, 0);
-	atl1_write_phy_reg(hw, MII_DBG_DATA, 0x124E);
-	atl1_write_phy_reg(hw, MII_DBG_ADDR, 2);
-	atl1_write_phy_reg(hw, MII_DBG_DATA, 0x3000);
-	atl1_write_phy_reg(hw, MII_DBG_ADDR, 3);
-	atl1_write_phy_reg(hw, MII_DBG_DATA, 0);
-
-}
-#endif
-
-/*
  * Resets the PHY and make all config validate
  * hw - Struct containing variables accessed by shared code
  *
@@ -2023,6 +2007,7 @@ rrd_ok:
 		/* Good Receive */
 		pci_unmap_page(adapter->pdev, buffer_info->dma,
 			       buffer_info->length, PCI_DMA_FROMDEVICE);
+		buffer_info->dma = 0;
 		skb = buffer_info->skb;
 		length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size);
 
@@ -2859,7 +2844,6 @@ disable_wol:
 	ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
 	iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC);
 	ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
-	atl1_phy_enter_power_saving(hw);
 	hw->phy_configured = false;
 	pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
 exit:
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 3634b5fd791..7023d77bf38 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -1239,12 +1239,7 @@ static int au1000_rx(struct net_device *dev)
  */
 static irqreturn_t au1000_interrupt(int irq, void *dev_id)
 {
-	struct net_device *dev = (struct net_device *) dev_id;
-
-	if (dev == NULL) {
-		printk(KERN_ERR "%s: isr: null dev ptr\n", dev->name);
-		return IRQ_RETVAL(1);
-	}
+	struct net_device *dev = dev_id;
 
 	/* Handle RX interrupts first to minimize chance of overrun */
 
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 89c0018132e..41443435ab1 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -22,7 +22,6 @@
 #include <linux/crc32.h>
 #include <linux/device.h>
 #include <linux/spinlock.h>
-#include <linux/ethtool.h>
 #include <linux/mii.h>
 #include <linux/phy.h>
 #include <linux/netdevice.h>
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 4b46e68183e..367b6d46270 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -5724,14 +5724,12 @@ bnx2_reset_task(struct work_struct *work)
 	if (!netif_running(bp->dev))
 		return;
 
-	bp->in_reset_task = 1;
 	bnx2_netif_stop(bp);
 
 	bnx2_init_nic(bp);
 
 	atomic_set(&bp->intr_sem, 1);
 	bnx2_netif_start(bp);
-	bp->in_reset_task = 0;
 }
 
 static void
@@ -5907,12 +5905,7 @@ bnx2_close(struct net_device *dev)
 	struct bnx2 *bp = netdev_priv(dev);
 	u32 reset_code;
 
-	/* Calling flush_scheduled_work() may deadlock because
-	 * linkwatch_event() may be on the workqueue and it will try to get
-	 * the rtnl_lock which we are holding.
-	 */
-	while (bp->in_reset_task)
-		msleep(1);
+	cancel_work_sync(&bp->reset_task);
 
 	bnx2_disable_int_sync(bp);
 	bnx2_napi_disable(bp);
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 1eaf5bb3d9c..2377cc13bf6 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6656,7 +6656,6 @@ struct bnx2 {
 	int			current_interval;
 	struct			timer_list timer;
 	struct work_struct	reset_task;
-	int			in_reset_task;
 
 	/* Used to synchronize phy accesses. */
 	spinlock_t		phy_lock;
diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c
index 7bdb5af3595..70cba64732c 100644
--- a/drivers/net/bnx2x.c
+++ b/drivers/net/bnx2x.c
@@ -6,7 +6,8 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation.
  *
- * Written by: Eliezer Tamir <eliezert@broadcom.com>
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Eliezer Tamir
  * Based on code from Michael Chan's bnx2 driver
  * UDP CSUM errata workaround by Arik Gendelman
  * Slowpath rework by Vladislav Zolotarov
@@ -74,7 +75,7 @@ static char version[] __devinitdata =
 	"Broadcom NetXtreme II 5771X 10Gigabit Ethernet Driver "
 	DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
 
-MODULE_AUTHOR("Eliezer Tamir <eliezert@broadcom.com>");
+MODULE_AUTHOR("Eliezer Tamir");
 MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_MODULE_VERSION);
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 4f0c0d31e7c..8e68d06510a 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -6,7 +6,8 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation.
  *
- * Written by: Eliezer Tamir <eliezert@broadcom.com>
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Eliezer Tamir
  * Based on code from Michael Chan's bnx2 driver
  */
 
diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h
index dcaecc53bdb..370686eef97 100644
--- a/drivers/net/bnx2x_init.h
+++ b/drivers/net/bnx2x_init.h
@@ -6,7 +6,8 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation.
  *
- * Written by: Eliezer Tamir <eliezert@broadcom.com>
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Eliezer Tamir
  */
 
 #ifndef BNX2X_INIT_H
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index 93e13636f8d..83768df2780 100644
--- a/drivers/net/cassini.c
+++ b/