Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

65 files changed, 1545 insertions, 1734 deletions

diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
index 39410016b4f..e1f04bb437e 100644
--- a/drivers/net/wireless/adm8211.c
+++ b/drivers/net/wireless/adm8211.c
@@ -1400,15 +1400,15 @@ static void adm8211_configure_filter(struct ieee80211_hw *dev,
 }
 
 static int adm8211_add_interface(struct ieee80211_hw *dev,
-				 struct ieee80211_if_init_conf *conf)
+				 struct ieee80211_vif *vif)
 {
 	struct adm8211_priv *priv = dev->priv;
 	if (priv->mode != NL80211_IFTYPE_MONITOR)
 		return -EOPNOTSUPP;
 
-	switch (conf->type) {
+	switch (vif->type) {
 	case NL80211_IFTYPE_STATION:
-		priv->mode = conf->type;
+		priv->mode = vif->type;
 		break;
 	default:
 		return -EOPNOTSUPP;
@@ -1416,8 +1416,8 @@ static int adm8211_add_interface(struct ieee80211_hw *dev,
 
 	ADM8211_IDLE();
 
-	ADM8211_CSR_WRITE(PAR0, le32_to_cpu(*(__le32 *)conf->mac_addr));
-	ADM8211_CSR_WRITE(PAR1, le16_to_cpu(*(__le16 *)(conf->mac_addr + 4)));
+	ADM8211_CSR_WRITE(PAR0, le32_to_cpu(*(__le32 *)vif->addr));
+	ADM8211_CSR_WRITE(PAR1, le16_to_cpu(*(__le16 *)(vif->addr + 4)));
 
 	adm8211_update_mode(dev);
 
@@ -1427,7 +1427,7 @@ static int adm8211_add_interface(struct ieee80211_hw *dev,
 }
 
 static void adm8211_remove_interface(struct ieee80211_hw *dev,
-				     struct ieee80211_if_init_conf *conf)
+				     struct ieee80211_vif *vif)
 {
 	struct adm8211_priv *priv = dev->priv;
 	priv->mode = NL80211_IFTYPE_MONITOR;
diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c
index 2517364d3eb..0fb419936df 100644
--- a/drivers/net/wireless/at76c50x-usb.c
+++ b/drivers/net/wireless/at76c50x-usb.c
@@ -1789,7 +1789,7 @@ static void at76_mac80211_stop(struct ieee80211_hw *hw)
 }
 
 static int at76_add_interface(struct ieee80211_hw *hw,
-			      struct ieee80211_if_init_conf *conf)
+			      struct ieee80211_vif *vif)
 {
 	struct at76_priv *priv = hw->priv;
 	int ret = 0;
@@ -1798,7 +1798,7 @@ static int at76_add_interface(struct ieee80211_hw *hw,
 
 	mutex_lock(&priv->mtx);
 
-	switch (conf->type) {
+	switch (vif->type) {
 	case NL80211_IFTYPE_STATION:
 		priv->iw_mode = IW_MODE_INFRA;
 		break;
@@ -1814,7 +1814,7 @@ exit:
 }
 
 static void at76_remove_interface(struct ieee80211_hw *hw,
-				  struct ieee80211_if_init_conf *conf)
+				  struct ieee80211_vif *vif)
 {
 	at76_dbg(DBG_MAC80211, "%s()", __func__);
 }
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index 20f04ab2b13..4d27f7f67c7 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -1939,7 +1939,7 @@ err_free:
 }
 
 static int ar9170_op_add_interface(struct ieee80211_hw *hw,
-				   struct ieee80211_if_init_conf *conf)
+				   struct ieee80211_vif *vif)
 {
 	struct ar9170 *ar = hw->priv;
 	struct ath_common *common = &ar->common;
@@ -1952,8 +1952,8 @@ static int ar9170_op_add_interface(struct ieee80211_hw *hw,
 		goto unlock;
 	}
 
-	ar->vif = conf->vif;
-	memcpy(common->macaddr, conf->mac_addr, ETH_ALEN);
+	ar->vif = vif;
+	memcpy(common->macaddr, vif->addr, ETH_ALEN);
 
 	if (modparam_nohwcrypt || (ar->vif->type != NL80211_IFTYPE_STATION)) {
 		ar->rx_software_decryption = true;
@@ -1973,7 +1973,7 @@ unlock:
 }
 
 static void ar9170_op_remove_interface(struct ieee80211_hw *hw,
-				       struct ieee80211_if_init_conf *conf)
+				       struct ieee80211_vif *vif)
 {
 	struct ar9170 *ar = hw->priv;
 
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index a4c086f069b..fdfaf0f618f 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -225,9 +225,9 @@ static int ath5k_reset_wake(struct ath5k_softc *sc);
 static int ath5k_start(struct ieee80211_hw *hw);
 static void ath5k_stop(struct ieee80211_hw *hw);
 static int ath5k_add_interface(struct ieee80211_hw *hw,
-		struct ieee80211_if_init_conf *conf);
+		struct ieee80211_vif *vif);
 static void ath5k_remove_interface(struct ieee80211_hw *hw,
-		struct ieee80211_if_init_conf *conf);
+		struct ieee80211_vif *vif);
 static int ath5k_config(struct ieee80211_hw *hw, u32 changed);
 static u64 ath5k_prepare_multicast(struct ieee80211_hw *hw,
 				   int mc_count, struct dev_addr_list *mc_list);
@@ -1903,17 +1903,6 @@ accept:
 		rxs->noise = sc->ah->ah_noise_floor;
 		rxs->signal = rxs->noise + rs.rs_rssi;
 
-		/* An rssi of 35 indicates you should be able use
-		 * 54 Mbps reliably. A more elaborate scheme can be used
-		 * here but it requires a map of SNR/throughput for each
-		 * possible mode used */
-		rxs->qual = rs.rs_rssi * 100 / 35;
-
-		/* rssi can be more than 35 though, anything above that
-		 * should be considered at 100% */
-		if (rxs->qual > 100)
-			rxs->qual = 100;
-
 		rxs->antenna = rs.rs_antenna;
 		rxs->rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate);
 		rxs->flag |= ath5k_rx_decrypted(sc, ds, skb, &rs);
@@ -2381,6 +2370,9 @@ ath5k_init(struct ath5k_softc *sc)
 	 */
 	ath5k_stop_locked(sc);
 
+	/* Set PHY calibration interval */
+	ah->ah_cal_intval = ath5k_calinterval;
+
 	/*
 	 * The basic interface to setting the hardware in a good
 	 * state is ``reset''.  On return the hardware is known to
@@ -2408,10 +2400,6 @@ ath5k_init(struct ath5k_softc *sc)
 
 	/* Set ack to be sent at low bit-rates */
 	ath5k_hw_set_ack_bitrate_high(ah, false);
-
-	/* Set PHY calibration inteval */
-	ah->ah_cal_intval = ath5k_calinterval;
-
 	ret = 0;
 done:
 	mmiowb();
@@ -2785,7 +2773,7 @@ static void ath5k_stop(struct ieee80211_hw *hw)
 }
 
 static int ath5k_add_interface(struct ieee80211_hw *hw,
-		struct ieee80211_if_init_conf *conf)
+		struct ieee80211_vif *vif)
 {
 	struct ath5k_softc *sc = hw->priv;
 	int ret;
@@ -2796,22 +2784,22 @@ static int ath5k_add_interface(struct ieee80211_hw *hw,
 		goto end;
 	}
 
-	sc->vif = conf->vif;
+	sc->vif = vif;
 
-	switch (conf->type) {
+	switch (vif->type) {
 	case NL80211_IFTYPE_AP:
 	case NL80211_IFTYPE_STATION:
 	case NL80211_IFTYPE_ADHOC:
 	case NL80211_IFTYPE_MESH_POINT:
 	case NL80211_IFTYPE_MONITOR:
-		sc->opmode = conf->type;
+		sc->opmode = vif->type;
 		break;
 	default:
 		ret = -EOPNOTSUPP;
 		goto end;
 	}
 
-	ath5k_hw_set_lladdr(sc->ah, conf->mac_addr);
+	ath5k_hw_set_lladdr(sc->ah, vif->addr);
 	ath5k_mode_setup(sc);
 
 	ret = 0;
@@ -2822,13 +2810,13 @@ end:
 
 static void
 ath5k_remove_interface(struct ieee80211_hw *hw,
-			struct ieee80211_if_init_conf *conf)
+			struct ieee80211_vif *vif)
 {
 	struct ath5k_softc *sc = hw->priv;
 	u8 mac[ETH_ALEN] = {};
 
 	mutex_lock(&sc->lock);
-	if (sc->vif != conf->vif)
+	if (sc->vif != vif)
 		goto end;
 
 	ath5k_hw_set_lladdr(sc->ah, mac);
diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h
index 0c87771383f..e185479e295 100644
--- a/drivers/net/wireless/ath/ath9k/mac.h
+++ b/drivers/net/wireless/ath/ath9k/mac.h
@@ -77,6 +77,9 @@
 #define ATH9K_TXERR_XTXOP          0x08
 #define ATH9K_TXERR_TIMER_EXPIRED  0x10
 #define ATH9K_TX_ACKED		   0x20
+#define ATH9K_TXERR_MASK						\
+	(ATH9K_TXERR_XRETRY | ATH9K_TXERR_FILT | ATH9K_TXERR_FIFO |	\
+	 ATH9K_TXERR_XTXOP | ATH9K_TXERR_TIMER_EXPIRED)
 
 #define ATH9K_TX_BA                0x01
 #define ATH9K_TX_PWRMGMT           0x02
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 3f5b887d0fc..79fbbda1549 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2504,6 +2504,9 @@ static void ath9k_stop(struct ieee80211_hw *hw)
 		return; /* another wiphy still in use */
 	}
 
+	/* Ensure HW is awake when we try to shut it down. */
+	ath9k_ps_wakeup(sc);
+
 	if (ah->btcoex_hw.enabled) {
 		ath9k_hw_btcoex_disable(ah);
 		if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
@@ -2524,6 +2527,9 @@ static void ath9k_stop(struct ieee80211_hw *hw)
 	/* disable HAL and put h/w to sleep */
 	ath9k_hw_disable(ah);
 	ath9k_hw_configpcipowersave(ah, 1, 1);
+	ath9k_ps_restore(sc);
+
+	/* Finally, put the chip in FULL SLEEP mode */
 	ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
 
 	sc->sc_flags |= SC_OP_INVALID;
@@ -2534,12 +2540,12 @@ static void ath9k_stop(struct ieee80211_hw *hw)
 }
 
 static int ath9k_add_interface(struct ieee80211_hw *hw,
-			       struct ieee80211_if_init_conf *conf)
+			       struct ieee80211_vif *vif)
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-	struct ath_vif *avp = (void *)conf->vif->drv_priv;
+	struct ath_vif *avp = (void *)vif->drv_priv;
 	enum nl80211_iftype ic_opmode = NL80211_IFTYPE_UNSPECIFIED;
 	int ret = 0;
 
@@ -2551,7 +2557,7 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
 		goto out;
 	}
 
-	switch (conf->type) {
+	switch (vif->type) {
 	case NL80211_IFTYPE_STATION:
 		ic_opmode = NL80211_IFTYPE_STATION;
 		break;
@@ -2562,11 +2568,11 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
 			ret = -ENOBUFS;
 			goto out;
 		}
-		ic_opmode = conf->type;
+		ic_opmode = vif->type;
 		break;
 	default:
 		ath_print(common, ATH_DBG_FATAL,
-			"Interface type %d not yet supported\n", conf->type);
+			"Interface type %d not yet supported\n", vif->type);
 		ret = -EOPNOTSUPP;
 		goto out;
 	}
@@ -2598,18 +2604,18 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
 	 * Enable MIB interrupts when there are hardware phy counters.
 	 * Note we only do this (at the moment) for station mode.
 	 */
-	if ((conf->type == NL80211_IFTYPE_STATION) ||
-	    (conf->type == NL80211_IFTYPE_ADHOC) ||
-	    (conf->type == NL80211_IFTYPE_MESH_POINT)) {
+	if ((vif->type == NL80211_IFTYPE_STATION) ||
+	    (vif->type == NL80211_IFTYPE_ADHOC) ||
+	    (vif->type == NL80211_IFTYPE_MESH_POINT)) {
 		sc->imask |= ATH9K_INT_MIB;
 		sc->imask |= ATH9K_INT_TSFOOR;
 	}
 
 	ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
 
-	if (conf->type == NL80211_IFTYPE_AP    ||
-	    conf->type == NL80211_IFTYPE_ADHOC ||
-	    conf->type == NL80211_IFTYPE_MONITOR)
+	if (vif->type == NL80211_IFTYPE_AP    ||
+	    vif->type == NL80211_IFTYPE_ADHOC ||
+	    vif->type == NL80211_IFTYPE_MONITOR)
 		ath_start_ani(common);
 
 out:
@@ -2618,12 +2624,12 @@ out:
 }
 
 static void ath9k_remove_interface(struct ieee80211_hw *hw,
-				   struct ieee80211_if_init_conf *conf)
+				   struct ieee80211_vif *vif)
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-	struct ath_vif *avp = (void *)conf->vif->drv_priv;
+	struct ath_vif *avp = (void *)vif->drv_priv;
 	int i;
 
 	ath_print(common, ATH_DBG_CONFIG, "Detach Interface\n");
@@ -2637,14 +2643,16 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw,
 	if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) ||
 	    (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) ||
 	    (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) {
+		ath9k_ps_wakeup(sc);
 		ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
 		ath_beacon_return(sc, avp);
+		ath9k_ps_restore(sc);
 	}
 
 	sc->sc_flags &= ~SC_OP_BEACONS;
 
 	for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {
-		if (sc->beacon.bslot[i] == conf->vif) {
+		if (sc->beacon.bslot[i] == vif) {
 			printk(KERN_DEBUG "%s: vif had allocated beacon "
 			       "slot\n", __func__);
 			sc->beacon.bslot[i] = NULL;
@@ -3087,15 +3095,21 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw,
 	case IEEE80211_AMPDU_RX_STOP:
 		break;
 	case IEEE80211_AMPDU_TX_START:
+		ath9k_ps_wakeup(sc);
 		ath_tx_aggr_start(sc, sta, tid, ssn);
 		ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+		ath9k_ps_restore(sc);
 		break;
 	case IEEE80211_AMPDU_TX_STOP:
+		ath9k_ps_wakeup(sc);
 		ath_tx_aggr_stop(sc, sta, tid);
 		ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+		ath9k_ps_restore(sc);
 		break;
 	case IEEE80211_AMPDU_TX_OPERATIONAL:
+		ath9k_ps_wakeup(sc);
 		ath_tx_aggr_resume(sc, sta, tid);
+		ath9k_ps_restore(sc);
 		break;
 	default:
 		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index 5321f735e5a..f7af5ea5475 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -96,7 +96,7 @@ static void ath_pci_bt_coex_prep(struct ath_common *common)
 	pci_write_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, aspm);
 }
 
-const static struct ath_bus_ops ath_pci_bus_ops = {
+static const struct ath_bus_ops ath_pci_bus_ops = {
 	.read_cachesize = ath_pci_read_cachesize,
 	.cleanup = ath_pci_cleanup,
 	.eeprom_read = ath_pci_eeprom_read,
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 1e813bbf474..fa12b9060b0 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2072,7 +2072,7 @@ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq)
 				&txq->axq_q, lastbf->list.prev);
 
 		txq->axq_depth--;
-		txok = !(ds->ds_txstat.ts_status & ATH9K_TXERR_FILT);
+		txok = !(ds->ds_txstat.ts_status & ATH9K_TXERR_MASK);
 		txq->axq_tx_inprogress = false;
 		spin_unlock_bh(&txq->axq_lock);
 
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 64c12e1bced..073be566d05 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -3,6 +3,7 @@ config B43
 	depends on SSB_POSSIBLE && MAC80211 && HAS_DMA
 	select SSB
 	select FW_LOADER
+	select SSB_BLOCKIO
 	---help---
 	  b43 is a driver for the Broadcom 43xx series wireless devices.
 
@@ -78,14 +79,6 @@ config B43_SDIO
 
 	  If unsure, say N.
 
-# Data transfers to the device via PIO
-# This is only needed on PCMCIA and SDIO devices. All others can do DMA properly.
-config B43_PIO
-	bool
-	depends on B43 && (B43_SDIO || B43_PCMCIA || B43_FORCE_PIO)
-	select SSB_BLOCKIO
-	default y
-
 config B43_NPHY
 	bool "Pre IEEE 802.11n support (BROKEN)"
 	depends on B43 && EXPERIMENTAL && BROKEN
@@ -137,12 +130,4 @@ config B43_DEBUG
 	  for production use.
 	  Only say Y, if you are debugging a problem in the b43 driver sourcecode.
 
-config B43_FORCE_PIO
-	bool "Force usage of PIO instead of DMA"
-	depends on B43 && B43_DEBUG
-	---help---
-	  This will disable DMA and always enable PIO instead.
 
-	  Say N!
-	  This is only for debugging the PIO engine code. You do
-	  _NOT_ want to enable this.
diff --git a/drivers/net/wireless/b43/Makefile b/drivers/net/wireless/b43/Makefile
index 84772a2542d..5e83b6f0a3a 100644
--- a/drivers/net/wireless/b43/Makefile
+++ b/drivers/net/wireless/b43/Makefile
@@ -12,7 +12,7 @@ b43-y				+= xmit.o
 b43-y				+= lo.o
 b43-y				+= wa.o
 b43-y				+= dma.o
-b43-$(CONFIG_B43_PIO)		+= pio.o
+b43-y				+= pio.o
 b43-y				+= rfkill.o
 b43-$(CONFIG_B43_LEDS)		+= leds.o
 b43-$(CONFIG_B43_PCMCIA)	+= pcmcia.o
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index fe3bf949199..2f12a750bc9 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -821,11 +821,9 @@ struct b43_wl {
 	/* The device LEDs. */
 	struct b43_leds leds;
 
-#ifdef CONFIG_B43_PIO
 	/* Kmalloc'ed scratch space for PIO TX/RX. Protected by wl->mutex. */
 	u8 pio_scratchspace[110] __attribute__((__aligned__(8)));
 	u8 pio_tailspace[4] __attribute__((__aligned__(8)));
-#endif /* CONFIG_B43_PIO */
 };
 
 static inline struct b43_wl *hw_to_b43_wl(struct ieee80211_hw *hw)
@@ -876,20 +874,9 @@ static inline void b43_write32(struct b43_wldev *dev, u16 offset, u32 value)
 
 static inline bool b43_using_pio_transfers(struct b43_wldev *dev)
 {
-#ifdef CONFIG_B43_PIO
 	return dev->__using_pio_transfers;
-#else
-	return 0;
-#endif
 }
 
-#ifdef CONFIG_B43_FORCE_PIO
-# define B43_FORCE_PIO	1
-#else
-# define B43_FORCE_PIO	0
-#endif
-
-
 /* Message printing */
 void b43info(struct b43_wl *wl, const char *fmt, ...)
     __attribute__ ((format(printf, 2, 3)));
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 027be275e03..615af22c49f 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -383,160 +383,44 @@ static inline
 	}
 }
 
-/* Check if a DMA region fits the device constraints.
- * Returns true, if the region is OK for usage with