Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	drivers/infiniband/core/iwcm.c
	drivers/net/chelsio/cxgb2.c
	drivers/net/wireless/bcm43xx/bcm43xx_main.c
	drivers/net/wireless/prism54/islpci_eth.c
	drivers/usb/core/hub.h
	drivers/usb/input/hid-core.c
	net/core/netpoll.c

Fix up merge failures with Linus's head and fix new compilation failures.

Signed-Off-By: David Howells <dhowells@redhat.com>

37 files changed, 806 insertions, 579 deletions

diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index 0c07b8b7250..10bcb48e80d 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -595,7 +595,7 @@ static void atmel_join_bss(struct atmel_private *priv, int bss_index);
 static void atmel_smooth_qual(struct atmel_private *priv);
 static void atmel_writeAR(struct net_device *dev, u16 data);
 static int probe_atmel_card(struct net_device *dev);
-static int reset_atmel_card(struct net_device *dev );
+static int reset_atmel_card(struct net_device *dev);
 static void atmel_enter_state(struct atmel_private *priv, int new_state);
 int atmel_open (struct net_device *dev);
 
@@ -784,11 +784,11 @@ static void tx_update_descriptor(struct atmel_private *priv, int is_bcast,
 
 static int start_tx(struct sk_buff *skb, struct net_device *dev)
 {
+	static const u8 SNAP_RFC1024[6] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
 	struct atmel_private *priv = netdev_priv(dev);
 	struct ieee80211_hdr_4addr header;
 	unsigned long flags;
 	u16 buff, frame_ctl, len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN;
-	u8 SNAP_RFC1024[6] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
 
 	if (priv->card && priv->present_callback &&
 	    !(*priv->present_callback)(priv->card)) {
@@ -1193,7 +1193,7 @@ static irqreturn_t service_interrupt(int irq, void *dev_id)
 
 		atmel_set_gcr(dev, GCR_ACKINT); /* acknowledge interrupt */
 
-		for (i = 0; i < sizeof(irq_order)/sizeof(u8); i++)
+		for (i = 0; i < ARRAY_SIZE(irq_order); i++)
 			if (isr & irq_order[i])
 				break;
 
@@ -1345,10 +1345,10 @@ int atmel_open(struct net_device *dev)
 		atmel_set_mib8(priv, Phy_Mib_Type, PHY_MIB_REG_DOMAIN_POS, priv->reg_domain);
 	} else {
 		priv->reg_domain = atmel_get_mib8(priv, Phy_Mib_Type, PHY_MIB_REG_DOMAIN_POS);
-		for (i = 0; i < sizeof(channel_table)/sizeof(channel_table[0]); i++)
+		for (i = 0; i < ARRAY_SIZE(channel_table); i++)
 			if (priv->reg_domain == channel_table[i].reg_domain)
 				break;
-		if (i == sizeof(channel_table)/sizeof(channel_table[0])) {
+		if (i == ARRAY_SIZE(channel_table)) {
 			priv->reg_domain = REG_DOMAIN_MKK1;
 			printk(KERN_ALERT "%s: failed to get regulatory domain: assuming MKK1.\n", dev->name);
 		}
@@ -1393,7 +1393,7 @@ static int atmel_validate_channel(struct atmel_private *priv, int channel)
 	   else return suitable default channel */
 	int i;
 
-	for (i = 0; i < sizeof(channel_table)/sizeof(channel_table[0]); i++)
+	for (i = 0; i < ARRAY_SIZE(channel_table); i++)
 		if (priv->reg_domain == channel_table[i].reg_domain) {
 			if (channel >= channel_table[i].min &&
 			    channel <= channel_table[i].max)
@@ -1437,7 +1437,7 @@ static int atmel_proc_output (char *buf, struct atmel_private *priv)
 		}
 
 		r = "<unknown>";
-		for (i = 0; i < sizeof(channel_table)/sizeof(channel_table[0]); i++)
+		for (i = 0; i < ARRAY_SIZE(channel_table); i++)
 			if (priv->reg_domain == channel_table[i].reg_domain)
 				r = channel_table[i].name;
 
@@ -1736,7 +1736,7 @@ static int atmel_set_encode(struct net_device *dev,
 				/* Disable the key */
 				priv->wep_key_len[index] = 0;
 		/* Check if the key is not marked as invalid */
-		if(!(dwrq->flags & IW_ENCODE_NOKEY)) {
+		if (!(dwrq->flags & IW_ENCODE_NOKEY)) {
 			/* Cleanup */
 			memset(priv->wep_keys[index], 0, 13);
 			/* Copy the key in the driver */
@@ -1907,7 +1907,7 @@ static int atmel_get_encodeext(struct net_device *dev,
 
 	encoding->flags = idx + 1;
 	memset(ext, 0, sizeof(*ext));
-	
+
 	if (!priv->wep_is_on) {
 		ext->alg = IW_ENCODE_ALG_NONE;
 		ext->key_len = 0;
@@ -2343,6 +2343,14 @@ static int atmel_get_scan(struct net_device *dev,
 		iwe.u.freq.e = 0;
 		current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_FREQ_LEN);
 
+		/* Add quality statistics */
+		iwe.cmd = IWEVQUAL;
+		iwe.u.qual.level = priv->BSSinfo[i].RSSI;
+		iwe.u.qual.qual  = iwe.u.qual.level;
+		/* iwe.u.qual.noise  = SOMETHING */
+		current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA , &iwe, IW_EV_QUAL_LEN);
+
+
 		iwe.cmd = SIOCGIWENCODE;
 		if (priv->BSSinfo[i].UsingWEP)
 			iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
@@ -2373,7 +2381,7 @@ static int atmel_get_range(struct net_device *dev,
 	range->min_nwid = 0x0000;
 	range->max_nwid = 0x0000;
 	range->num_channels = 0;
-	for (j = 0; j < sizeof(channel_table)/sizeof(channel_table[0]); j++)
+	for (j = 0; j < ARRAY_SIZE(channel_table); j++)
 		if (priv->reg_domain == channel_table[j].reg_domain) {
 			range->num_channels = channel_table[j].max - channel_table[j].min + 1;
 			break;
@@ -2579,9 +2587,9 @@ static const struct iw_priv_args atmel_private_args[] = {
 
 static const struct iw_handler_def atmel_handler_def =
 {
-	.num_standard	= sizeof(atmel_handler)/sizeof(iw_handler),
-	.num_private	= sizeof(atmel_private_handler)/sizeof(iw_handler),
-	.num_private_args = sizeof(atmel_private_args)/sizeof(struct iw_priv_args),
+	.num_standard	= ARRAY_SIZE(atmel_handler),
+	.num_private	= ARRAY_SIZE(atmel_private_handler),
+	.num_private_args = ARRAY_SIZE(atmel_private_args),
 	.standard	= (iw_handler *) atmel_handler,
 	.private	= (iw_handler *) atmel_private_handler,
 	.private_args	= (struct iw_priv_args *) atmel_private_args,
@@ -2645,7 +2653,7 @@ static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 
 		domain[REGDOMAINSZ] = 0;
 		rc = -EINVAL;
-		for (i = 0; i < sizeof(channel_table)/sizeof(channel_table[0]); i++) {
+		for (i = 0; i < ARRAY_SIZE(channel_table); i++) {
 			/* strcasecmp doesn't exist in the library */
 			char *a = channel_table[i].name;
 			char *b = domain;
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 785664090bb..5c410989c4d 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -5,12 +5,12 @@
         Copyright 2000-2001 ATMEL Corporation.
         Copyright 2003 Simon Kelley.
 
-    This code was developed from version 2.1.1 of the Atmel drivers, 
-    released by Atmel corp. under the GPL in December 2002. It also 
-    includes code from the Linux aironet drivers (C) Benjamin Reed, 
-    and the Linux PCMCIA package, (C) David Hinds. 
+    This code was developed from version 2.1.1 of the Atmel drivers,
+    released by Atmel corp. under the GPL in December 2002. It also
+    includes code from the Linux aironet drivers (C) Benjamin Reed,
+    and the Linux PCMCIA package, (C) David Hinds.
 
-    For all queries about this code, please contact the current author, 
+    For all queries about this code, please contact the current author,
     Simon Kelley <simon@thekelleys.org.uk> and not Atmel Corporation.
 
     This program is free software; you can redistribute it and/or modify
@@ -87,7 +87,7 @@ MODULE_SUPPORTED_DEVICE("Atmel at76c50x PCMCIA cards");
    event is received.  The config() and release() entry points are
    used to configure or release a socket, in response to card
    insertion and ejection events.  They are invoked from the atmel_cs
-   event handler. 
+   event handler.
 */
 
 static int atmel_config(struct pcmcia_device *link);
@@ -133,22 +133,22 @@ static void atmel_detach(struct pcmcia_device *p_dev);
    device IO routines can use a flag like this to throttle IO to a
    card that is not ready to accept it.
 */
-   
+
 typedef struct local_info_t {
 	dev_node_t	node;
 	struct net_device *eth_dev;
 } local_info_t;
 
 /*======================================================================
-  
+
   atmel_attach() creates an "instance" of the driver, allocating
   local data structures for one device.  The device is registered
   with Card Services.
-  
+
   The dev_link structure is initialized, but we don't actually
   configure the card at this point -- we wait until we receive a
   card insertion event.
-  
+
   ======================================================================*/
 
 static int atmel_probe(struct pcmcia_device *p_dev)
@@ -184,12 +184,12 @@ static int atmel_probe(struct pcmcia_device *p_dev)
 } /* atmel_attach */
 
 /*======================================================================
-  
+
   This deletes a driver "instance".  The device is de-registered
   with Card Services.  If it has been released, all local data
   structures are freed.  Otherwise, the structures will be freed
   when the device is released.
-  
+
   ======================================================================*/
 
 static void atmel_detach(struct pcmcia_device *link)
@@ -202,11 +202,11 @@ static void atmel_detach(struct pcmcia_device *link)
 }
 
 /*======================================================================
-  
+
   atmel_config() is scheduled to run after a CARD_INSERTION event
   is received, to configure the PCMCIA socket, and to make the
   device available to the system.
-  
+
   ======================================================================*/
 
 #define CS_CHECK(fn, ret) \
@@ -237,12 +237,12 @@ static int atmel_config(struct pcmcia_device *link)
 	did = handle_to_dev(link).driver_data;
 
 	DEBUG(0, "atmel_config(0x%p)\n", link);
-	
+
 	tuple.Attributes = 0;
 	tuple.TupleData = buf;
 	tuple.TupleDataMax = sizeof(buf);
 	tuple.TupleOffset = 0;
-	
+
 	/*
 	  This reads the card's CONFIG tuple to find its configuration
 	  registers.
@@ -258,7 +258,7 @@ static int atmel_config(struct pcmcia_device *link)
 	  In this loop, we scan the CIS for configuration table entries,
 	  each of which describes a valid card configuration, including
 	  voltage, IO window, memory window, and interrupt settings.
-	  
+
 	  We make no assumptions about the card to be configured: we use
 	  just the information available in the CIS.  In an ideal world,
 	  this would work for any PCMCIA card, but it requires a complete
@@ -274,17 +274,17 @@ static int atmel_config(struct pcmcia_device *link)
 		if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
 				pcmcia_parse_tuple(link, &tuple, &parse) != 0)
 			goto next_entry;
-		
+
 		if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
 		if (cfg->index == 0) goto next_entry;
 		link->conf.ConfigIndex = cfg->index;
-		
+
 		/* Does this card need audio output? */
 		if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
 			link->conf.Attributes |= CONF_ENABLE_SPKR;
 			link->conf.Status = CCSR_AUDIO_ENA;
 		}
-		
+
 		/* Use power settings for Vcc and Vpp if present */
 		/*  Note that the CIS values need to be rescaled */
 		if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
@@ -293,11 +293,11 @@ static int atmel_config(struct pcmcia_device *link)
 		else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
 			link->conf.Vpp =
 				dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
-		
+
 		/* Do we need to allocate an interrupt? */
 		if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
 			link->conf.Attributes |= CONF_ENABLE_IRQ;
-		
+
 		/* IO window settings */
 		link->io.NumPorts1 = link->io.NumPorts2 = 0;
 		if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
@@ -315,18 +315,18 @@ static int atmel_config(struct pcmcia_device *link)
 				link->io.NumPorts2 = io->win[1].len;
 			}
 		}
-		
+
 		/* This reserves IO space but doesn't actually enable it */
 		if (pcmcia_request_io(link, &link->io) != 0)
 			goto next_entry;
 
 		/* If we got this far, we're cool! */
 		break;
-		
+
 	next_entry:
 		CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
 	}
-	
+
 	/*
 	  Allocate an interrupt line.  Note that this does not assign a
 	  handler to the interrupt, unless the 'Handler' member of the
@@ -334,31 +334,31 @@ static int atmel_config(struct pcmcia_device *link)
 	*/
 	if (link->conf.Attributes & CONF_ENABLE_IRQ)
 		CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
-	
+
 	/*
 	  This actually configures the PCMCIA socket -- setting up
 	  the I/O windows and the interrupt mapping, and putting the
 	  card and host interface into "Memory and IO" mode.
 	*/
 	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
-	
+
 	if (link->irq.AssignedIRQ == 0) {
-		printk(KERN_ALERT 
+		printk(KERN_ALERT
 		       "atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config.");
 		goto cs_failed;
 	}
-       
-	((local_info_t*)link->priv)->eth_dev = 
+
+	((local_info_t*)link->priv)->eth_dev =
 		init_atmel_card(link->irq.AssignedIRQ,
 				link->io.BasePort1,
 				did ? did->driver_info : ATMEL_FW_TYPE_NONE,
 				&handle_to_dev(link),
-				card_present, 
+				card_present,
 				link);
-	if (!((local_info_t*)link->priv)->eth_dev) 
+	if (!((local_info_t*)link->priv)->eth_dev)
 			goto cs_failed;
-	
-	
+
+
 	/*
 	  At this point, the dev_node_t structure(s) need to be
 	  initialized and arranged in a linked list at link->dev_node.
@@ -376,11 +376,11 @@ static int atmel_config(struct pcmcia_device *link)
 }
 
 /*======================================================================
-  
+
   After a card is removed, atmel_release() will unregister the
   device, and release the PCMCIA configuration.  If the device is
   still open, this will be postponed until it is closed.
-  
+
   ======================================================================*/
 
 static void atmel_release(struct pcmcia_device *link)
@@ -517,7 +517,7 @@ static void atmel_cs_cleanup(void)
     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
     STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
     IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-    POSSIBILITY OF SUCH DAMAGE.    
+    POSSIBILITY OF SUCH DAMAGE.
 */
 
 module_init(atmel_cs_init);
diff --git a/drivers/net/wireless/atmel_pci.c b/drivers/net/wireless/atmel_pci.c
index 3bfa791c323..92f87fbe750 100644
--- a/drivers/net/wireless/atmel_pci.c
+++ b/drivers/net/wireless/atmel_pci.c
@@ -53,18 +53,18 @@ static int __devinit atmel_pci_probe(struct pci_dev *pdev,
 				     const struct pci_device_id *pent)
 {
 	struct net_device *dev;
-		
+
 	if (pci_enable_device(pdev))
 		return -ENODEV;
-	
+
 	pci_set_master(pdev);
-	
-	dev = init_atmel_card(pdev->irq, pdev->resource[1].start, 
+
+	dev = init_atmel_card(pdev->irq, pdev->resource[1].start,
 			      ATMEL_FW_TYPE_506,
 			      &pdev->dev, NULL, NULL);
 	if (!dev)
 		return -ENODEV;
-	
+
 	pci_set_drvdata(pdev, dev);
 	return 0;
 }
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx.h b/drivers/net/wireless/bcm43xx/bcm43xx.h
index fbc0c087f53..8286678513b 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx.h
@@ -159,6 +159,7 @@
 
 /* Chipcommon registers. */
 #define BCM43xx_CHIPCOMMON_CAPABILITIES 	0x04
+#define BCM43xx_CHIPCOMMON_CTL			0x28
 #define BCM43xx_CHIPCOMMON_PLLONDELAY		0xB0
 #define BCM43xx_CHIPCOMMON_FREFSELDELAY		0xB4
 #define BCM43xx_CHIPCOMMON_SLOWCLKCTL		0xB8
@@ -172,6 +173,33 @@
 /* SBTOPCI2 values. */
 #define BCM43xx_SBTOPCI2_PREFETCH	0x4
 #define BCM43xx_SBTOPCI2_BURST		0x8
+#define BCM43xx_SBTOPCI2_MEMREAD_MULTI	0x20
+
+/* PCI-E core registers. */
+#define BCM43xx_PCIECORE_REG_ADDR      0x0130
+#define BCM43xx_PCIECORE_REG_DATA      0x0134
+#define BCM43xx_PCIECORE_MDIO_CTL      0x0128
+#define BCM43xx_PCIECORE_MDIO_DATA     0x012C
+
+/* PCI-E registers. */
+#define BCM43xx_PCIE_TLP_WORKAROUND    0x0004
+#define BCM43xx_PCIE_DLLP_LINKCTL      0x0100
+
+/* PCI-E MDIO bits. */
+#define BCM43xx_PCIE_MDIO_ST   0x40000000
+#define BCM43xx_PCIE_MDIO_WT   0x10000000
+#define BCM43xx_PCIE_MDIO_DEV  22
+#define BCM43xx_PCIE_MDIO_REG  18
+#define BCM43xx_PCIE_MDIO_TA   0x00020000
+#define BCM43xx_PCIE_MDIO_TC   0x0100
+
+/* MDIO devices. */
+#define BCM43xx_MDIO_SERDES_RX	0x1F
+
+/* SERDES RX registers. */
+#define BCM43xx_SERDES_RXTIMER	0x2
+#define BCM43xx_SERDES_CDR	0x6
+#define BCM43xx_SERDES_CDR_BW	0x7
 
 /* Chipcommon capabilities. */
 #define BCM43xx_CAPABILITIES_PCTL		0x00040000
@@ -221,6 +249,7 @@
 #define BCM43xx_COREID_USB20_HOST       0x819
 #define BCM43xx_COREID_USB20_DEV        0x81a
 #define BCM43xx_COREID_SDIO_HOST        0x81b
+#define BCM43xx_COREID_PCIE		0x820
 
 /* Core Information Registers */
 #define BCM43xx_CIR_BASE		0xf00
@@ -365,6 +394,9 @@
 #define BCM43xx_DEFAULT_SHORT_RETRY_LIMIT	7
 #define BCM43xx_DEFAULT_LONG_RETRY_LIMIT	4
 
+/* FIXME: the next line is a guess as to what the maximum RSSI value might be */
+#define RX_RSSI_MAX				60
+
 /* Max size of a security key */
 #define BCM43xx_SEC_KEYSIZE			16
 /* Security algorithms. */
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index 728a9b789fd..2ec2e5afce6 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -130,6 +130,10 @@ MODULE_PARM_DESC(fwpostfix, "Postfix for .fw files. Useful for debugging.");
 	{ PCI_VENDOR_ID_BROADCOM, 0x4301, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	/* Broadcom 4307 802.11b */
 	{ PCI_VENDOR_ID_BROADCOM, 0x4307, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	/* Broadcom 4311 802.11(a)/b/g */
+	{ PCI_VENDOR_ID_BROADCOM, 0x4311, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	/* Broadcom 4312 802.11a/b/g */
+	{ PCI_VENDOR_ID_BROADCOM, 0x4312, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	/* Broadcom 4318 802.11b/g */
 	{ PCI_VENDOR_ID_BROADCOM, 0x4318, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	/* Broadcom 4319 802.11a/b/g */
@@ -2600,8 +2604,9 @@ static int bcm43xx_probe_cores(struct bcm43xx_private *bcm)
 	/* fetch sb_id_hi from core information registers */
 	sb_id_hi = bcm43xx_read32(bcm, BCM43xx_CIR_SB_ID_HI);
 
-	core_id = (sb_id_hi & 0xFFF0) >> 4;
-	core_rev = (sb_id_hi & 0xF);
+	core_id = (sb_id_hi & 0x8FF0) >> 4;
+	core_rev = (sb_id_hi & 0x7000) >> 8;
+	core_rev |= (sb_id_hi & 0xF);
 	core_vendor = (sb_id_hi & 0xFFFF0000) >> 16;
 
 	/* if present, chipcommon is always core 0; read the chipid from it */
@@ -2679,14 +2684,10 @@ static int bcm43xx_probe_cores(struct bcm43xx_private *bcm)
 		bcm->chip_id, bcm->chip_rev);
 	dprintk(KERN_INFO PFX "Number of cores: %d\n", core_count);
 	if (bcm->core_chipcommon.available) {
-		dprintk(KERN_INFO PFX "Core 0: ID 0x%x, rev 0x%x, vendor 0x%x, %s\n",
-			core_id, core_rev, core_vendor,
-			bcm43xx_core_enabled(bcm) ? "enabled" : "disabled");
-	}
-
-	if (bcm->core_chipcommon.available)
+		dprintk(KERN_INFO PFX "Core 0: ID 0x%x, rev 0x%x, vendor 0x%x\n",
+			core_id, core_rev, core_vendor);
 		current_core = 1;
-	else
+	} else
 		current_core = 0;
 	for ( ; current_core < core_count; current_core++) {
 		struct bcm43xx_coreinfo *core;
@@ -2704,13 +2705,13 @@ static int bcm43xx_probe_cores(struct bcm43xx_private *bcm)
 		core_rev = (sb_id_hi & 0xF);
 		core_vendor = (sb_id_hi & 0xFFFF0000) >> 16;
 
-		dprintk(KERN_INFO PFX "Core %d: ID 0x%x, rev 0x%x, vendor 0x%x, %s\n",
-			current_core, core_id, core_rev, core_vendor,
-			bcm43xx_core_enabled(bcm) ? "enabled" : "disabled" );
+		dprintk(KERN_INFO PFX "Core %d: ID 0x%x, rev 0x%x, vendor 0x%x\n",
+			current_core, core_id, core_rev, core_vendor);
 
 		core = NULL;
 		switch (core_id) {
 		case BCM43xx_COREID_PCI:
+		case BCM43xx_COREID_PCIE:
 			core = &bcm->core_pci;
 			if (core->available) {
 				printk(KERN_WARNING PFX "Multiple PCI cores found.\n");
@@ -2749,12 +2750,12 @@ static int bcm43xx_probe_cores(struct bcm43xx_private *bcm)
 			case 6:
 			case 7:
 			case 9:
+			case 10:
 				break;
 			default:
-				printk(KERN_ERR PFX "Error: Unsupported 80211 core revision %u\n",
+				printk(KERN_WARNING PFX
+				       "Unsupported 80211 core revision %u\n",
 				       core_rev);
-				err = -ENODEV;
-				goto out;
 			}
 			bcm->nr_80211_available++;
 			core->priv = ext_80211;
@@ -2868,16 +2869,11 @@ static int bcm43xx_wireless_core_init(struct bcm43xx_private *bcm,
 	u32 sbimconfiglow;
 	u8 limit;
 
-	if (bcm->chip_rev < 5) {
+	if (bcm->core_pci.rev <= 5 && bcm->core_pci.id != BCM43xx_COREID_PCIE) {
 		sbimconfiglow = bcm43xx_read32(bcm, BCM43xx_CIR_SBIMCONFIGLOW);
 		sbimconfiglow &= ~ BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK;
 		sbimconfiglow &= ~ BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK;
-		if (bcm->bustype == BCM43xx_BUSTYPE_PCI)
-			sbimconfiglow |= 0x32;
-		else if (bcm->bustype == BCM43xx_BUSTYPE_SB)
-			sbimconfiglow |= 0x53;
-		else
-			assert(0);
+		sbimconfiglow |= 0x32;
 		bcm43xx_write32(bcm, BCM43xx_CIR_SBIMCONFIGLOW, sbimconfiglow);
 	}
 
@@ -3004,22 +3000,64 @@ static void bcm43xx_pcicore_broadcast_value(struct bcm43xx_private *bcm,
 
 static int bcm43xx_pcicore_commit_settings(struct bcm43xx_private *bcm)
 {
-	int err;
-	struct bcm43xx_coreinfo *old_core;
+	int err = 0;
 
-	old_core = bcm->current_core;
-	err = bcm43xx_switch_core(bcm, &bcm->core_pci);
-	if (err)
-		goto out;
+	bcm->irq_savedstate = bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL);
 
-	bcm43xx_pcicore_broadcast_value(bcm, 0xfd8, 0x00000000);
+	if (bcm->core_chipcommon.available) {
+		err = bcm43xx_switch_core(bcm, &bcm->core_chipcommon);
+		if (err)
+			goto out;
+
+		bcm43xx_pcicore_broadcast_value(bcm, 0xfd8, 0x00000000);
+
+		/* this function is always called when a PCI core is mapped */
+		err = bcm43xx_switch_core(bcm, &bcm->core_pci);
+		if (err)
+			goto out;
+	} else
+		bcm43xx_pcicore_broadcast_value(bcm, 0xfd8, 0x00000000);
+
+	bcm43xx_interrupt_enable(bcm, bcm->irq_savedstate);
 
-	bcm43xx_switch_core(bcm, old_core);
-	assert(err == 0);
 out:
 	return err;
 }
 
+static u32 bcm43xx_pcie_reg_read(struct bcm43xx_private *bcm, u32 address)
+{
+	bcm43xx_write32(bcm, BCM43xx_PCIECORE_REG_ADDR, address);
+	return bcm43xx_read32(bcm, BCM43xx_PCIECORE_REG_DATA);
+}
+
+static void bcm43xx_pcie_reg_write(struct bcm43xx_private *bcm, u32 address,
+				    u32 data)
+{
+	bcm43xx_write32(bcm, BCM43xx_PCIECORE_REG_ADDR, address);
+	bcm43xx_write32(bcm, BCM43xx_PCIECORE_REG_DATA, data);
+}
+
+static void bcm43xx_pcie_mdio_write(struct bcm43xx_private *bcm, u8 dev, u8 reg,
+				    u16 data)
+{
+	int i;
+
+	bcm43xx_write32(bcm, BCM43xx_PCIECORE_MDIO_CTL, 0x0082);
+	bcm43xx_write32(bcm, BCM43xx_PCIECORE_MDIO_DATA, BCM43xx_PCIE_MDIO_ST |
+			BCM43xx_PCIE_MDIO_WT | (dev << BCM43xx_PCIE_MDIO_DEV) |
+			(reg << BCM43xx_PCIE_MDIO_REG) | BCM43xx_PCIE_MDIO_TA |
+			data);
+	udelay(10);
+
+	for (i = 0; i < 10; i++) {
+		if (bcm43xx_read32(bcm, BCM43xx_PCIECORE_MDIO_CTL) &
+		    BCM43xx_PCIE_MDIO_TC)
+			break;
+		msleep(1);
+	}
+	bcm43xx_write32(bcm, BCM43xx_PCIECORE_MDIO_CTL, 0);
+}
+
 /* Make an I/O Core usable. "core_mask" is the bitmask of the cores to enable.
  * To enable core 0, pass a core_mask of 1<<0
  */
@@ -3039,7 +3077,8 @@ static int bcm43xx_setup_backplane_pci_connection(struct bcm43xx_private *bcm,
 	if (err)
 		goto out;
 
-	if (bcm->core_pci.rev < 6) {
+	if (bcm->current_core->rev < 6 ||
+		bcm->current_core->id == BCM43xx_COREID_PCI) {
 		value = bcm43xx_read32(bcm, BCM43xx_CIR_SBINTVEC);
 		value |= (1 << backplane_flag_nr);
 		bcm43xx_write32(bcm, BCM43xx_CIR_SBINTVEC, value);
@@ -3057,21 +3096,46 @@ static int bcm43xx_setup_backplane_pci_connection(struct bcm43xx_private *bcm,
 		}
 	}
 
-	value = bcm43xx_read32(bcm, BCM43xx_PCICORE_SBTOPCI2);
-	value |= BCM43xx_SBTOPCI2_PREFETCH | BCM43xx_SBTOPCI2_BURST;
-	bcm43xx_write32(bcm, BCM43xx_PCICORE_SBTOPCI2, value);
-
-	if (bcm->core_pci.rev < 5) {
-		value = bcm43xx_read32(bcm, BCM43xx_CIR_SBIMCONFIGLOW);
-		value |= (2 << BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_SHIFT)
-			 & BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK;
-		value |= (3 << BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_SHIFT)
-			 & BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK;
-		bcm43xx_write32(bcm, BCM43xx_CIR_SBIMCONFIGLOW, value);
-		err = bcm43xx_pcicore_commit_settings(bcm);
-		assert(err == 0);
+	if (bcm->current_core->id == BCM43xx_COREID_PCI) {
+		value = bcm43xx_read32(bcm, BCM43xx_PCICORE_SBTOPCI2);
+		value |= BCM43xx_SBTOPCI2_PREFETCH | BCM43xx_SBTOPCI2_BURST;
+		bcm43xx_write32(bcm, BCM43xx_PCICORE_SBTOPCI2, value);
+
+		if (bcm->current_core->rev < 5) {
+			value = bcm43xx_read32(bcm, BCM43xx_CIR_SBIMCONFIGLOW);
+			value |= (2 << BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_SHIFT)
+				 & BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK;
+			value |= (3 << BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_SHIFT)
+				 & BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK;
+			bcm43xx_write32(bcm, BCM43xx_CIR_SBIMCONFIGLOW, value);
+			err = bcm43xx_pcicore_commit_settings(bcm);
+			assert(err == 0);
+		} else if (bcm->current_core->rev >= 11) {
+			value = bcm43xx_read32(bcm, BCM43xx_PCICORE_SBTOPCI2);
+			value |= BCM43xx_SBTOPCI2_MEMREAD_MULTI;
+			bcm43xx_write32(bcm, BCM43xx_PCICORE_SBTOPCI2, value);
+		}
+	} else {
+		if (bcm->current_core->rev == 0 || bcm->current_core->rev == 1) {
+			value = bcm43xx_pcie_reg_read(bcm, BCM43xx_PCIE_TLP_WORKAROUND);
+			value |= 0x8;
+			bcm43xx_pcie_reg_write(bcm, BCM43xx_PCIE_TLP_WORKAROUND,
+					       value);
+		}
+		if (bcm->current_core->rev == 0) {
+			bcm43xx_pcie_mdio_write(bcm, BCM43xx_MDIO_SERDES_RX,
+						BCM43xx_SERDES_RXTIMER, 0x8128);
+			bcm43xx_pcie_mdio_write(bcm, BCM43xx_MDIO_SERDES_RX,
+						BCM43xx_SERDES_CDR, 0x0100);
+			bcm43xx_pcie_mdio_write(bcm, BCM43xx_MDIO_SERDES_RX,
+						BCM43xx_SERDES_CDR_BW, 0x1466);
+		} else if (bcm->current_core->rev == 1) {
+			value = bcm43xx_pcie_reg_read(bcm, BCM43xx_PCIE_DLLP_LINKCTL);
+			value |= 0x40;
+			bcm43xx_pcie_reg_write(bcm, BCM43xx_PCIE