diff options
| author | Nick Kossifidis <mickflemm@gmail.com> | 2010-11-23 21:02:20 +0200 |
|---|---|---|
| committer | John W. Linville <linville@tuxdriver.com> | 2010-11-30 13:52:34 -0500 |
| commit | 325089ab5847f5c1e43f42bb90d32f981867c4c1 (patch) | |
| tree | 6bdd3b750b17f55d4b6ee3ed01a61058fc17b7a5 /drivers/net/wireless | |
| parent | c297560206adf0cda8ce38ef9b20b0a025754c4d (diff) | |
ath5k: Small cleanup on tweak_initvals
* Now that we properly set rx/tx latencies for AR5311 remove
that old buggy part of code left inside ath5k_hw_tweak_initval_settings
that was never executed (you can't have an RF5112 radio on a mac older
than AR5212). Also use a magic value for 5311 PHY_SCAL value.
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless')
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/reg.h | 1 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/reset.c | 18 |
2 files changed, 4 insertions, 15 deletions
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h index ca79ecd832f..4d610617af3 100644 --- a/drivers/net/wireless/ath/ath5k/reg.h +++ b/drivers/net/wireless/ath/ath5k/reg.h @@ -2058,6 +2058,7 @@ #define AR5K_PHY_SCAL 0x9878 #define AR5K_PHY_SCAL_32MHZ 0x0000000e +#define AR5K_PHY_SCAL_32MHZ_5311 0x00000008 #define AR5K_PHY_SCAL_32MHZ_2417 0x0000000a #define AR5K_PHY_SCAL_32MHZ_HB63 0x00000032 diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c index 7db984ce90f..c9e5bad7cff 100644 --- a/drivers/net/wireless/ath/ath5k/reset.c +++ b/drivers/net/wireless/ath/ath5k/reset.c @@ -730,24 +730,12 @@ static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah, ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL); } - if ((ah->ah_radio == AR5K_RF5112) && - (ah->ah_mac_srev < AR5K_SREV_AR5211)) { - u32 usec_reg; - /* 5311 has different tx/rx latency masks - * from 5211, since we deal 5311 the same - * as 5211 when setting initvals, shift - * values here to their proper locations */ - usec_reg = ath5k_hw_reg_read(ah, AR5K_USEC_5211); - ath5k_hw_reg_write(ah, usec_reg & (AR5K_USEC_1 | - AR5K_USEC_32 | - AR5K_USEC_TX_LATENCY_5211 | - AR5K_REG_SM(29, - AR5K_USEC_RX_LATENCY_5210)), - AR5K_USEC_5211); + if (ah->ah_mac_srev < AR5K_SREV_AR5211) { /* Clear QCU/DCU clock gating register */ ath5k_hw_reg_write(ah, 0, AR5K_QCUDCU_CLKGT); /* Set DAC/ADC delays */ - ath5k_hw_reg_write(ah, 0x08, AR5K_PHY_SCAL); + ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ_5311, + AR5K_PHY_SCAL); /* Enable PCU FIFO corruption ECO */ AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211, AR5K_DIAG_SW_ECO_ENABLE); |