Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1436 commits)
  cassini: Use local-mac-address prom property for Cassini MAC address
  net: remove the duplicate #ifdef __KERNEL__
  net: bridge: check the length of skb after nf_bridge_maybe_copy_header()
  netconsole: clarify stopping message
  netconsole: don't announce stopping if nothing happened
  cnic: Fix the type field in SPQ messages
  netfilter: fix export secctx error handling
  netfilter: fix the race when initializing nf_ct_expect_hash_rnd
  ipv4: IP defragmentation must be ECN aware
  net: r6040: Return proper error for r6040_init_one
  dcb: use after free in dcb_flushapp()
  dcb: unlock on error in dcbnl_ieee_get()
  net: ixp4xx_eth: Return proper error for eth_init_one
  include/linux/if_ether.h: Add #define ETH_P_LINK_CTL for HPNA and wlan local tunnel
  net: add POLLPRI to sock_def_readable()
  af_unix: Avoid socket->sk NULL OOPS in stream connect security hooks.
  net_sched: pfifo_head_drop problem
  mac80211: remove stray extern
  mac80211: implement off-channel TX using hw r-o-c offload
  mac80211: implement hardware offload for remain-on-channel
  ...

1 files changed, 293 insertions, 0 deletions

diff --git a/drivers/net/wireless/wl12xx/event.c b/drivers/net/wireless/wl12xx/event.c
new file mode 100644
index 00000000000..f9146f5242f
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/event.c
@@ -0,0 +1,293 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "wl12xx.h"
+#include "reg.h"
+#include "io.h"
+#include "event.h"
+#include "ps.h"
+#include "scan.h"
+#include "wl12xx_80211.h"
+
+void wl1271_pspoll_work(struct work_struct *work)
+{
+	struct delayed_work *dwork;
+	struct wl1271 *wl;
+
+	dwork = container_of(work, struct delayed_work, work);
+	wl = container_of(dwork, struct wl1271, pspoll_work);
+
+	wl1271_debug(DEBUG_EVENT, "pspoll work");
+
+	mutex_lock(&wl->mutex);
+
+	if (unlikely(wl->state == WL1271_STATE_OFF))
+		goto out;
+
+	if (!test_and_clear_bit(WL1271_FLAG_PSPOLL_FAILURE, &wl->flags))
+		goto out;
+
+	if (!test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags))
+		goto out;
+
+	/*
+	 * if we end up here, then we were in powersave when the pspoll
+	 * delivery failure occurred, and no-one changed state since, so
+	 * we should go back to powersave.
+	 */
+	wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE, wl->basic_rate, true);
+
+out:
+	mutex_unlock(&wl->mutex);
+};
+
+static void wl1271_event_pspoll_delivery_fail(struct wl1271 *wl)
+{
+	int delay = wl->conf.conn.ps_poll_recovery_period;
+	int ret;
+
+	wl->ps_poll_failures++;
+	if (wl->ps_poll_failures == 1)
+		wl1271_info("AP with dysfunctional ps-poll, "
+			    "trying to work around it.");
+
+	/* force active mode receive data from the AP */
+	if (test_bit(WL1271_FLAG_PSM, &wl->flags)) {
+		ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE,
+					 wl->basic_rate, true);
+		if (ret < 0)
+			return;
+		set_bit(WL1271_FLAG_PSPOLL_FAILURE, &wl->flags);
+		ieee80211_queue_delayed_work(wl->hw, &wl->pspoll_work,
+					     msecs_to_jiffies(delay));
+	}
+
+	/*
+	 * If already in active mode, lets we should be getting data from
+	 * the AP right away. If we enter PSM too fast after this, and data
+	 * remains on the AP, we will get another event like this, and we'll
+	 * go into active once more.
+	 */
+}
+
+static int wl1271_event_ps_report(struct wl1271 *wl,
+				  struct event_mailbox *mbox,
+				  bool *beacon_loss)
+{
+	int ret = 0;
+	u32 total_retries = wl->conf.conn.psm_entry_retries;
+
+	wl1271_debug(DEBUG_EVENT, "ps_status: 0x%x", mbox->ps_status);
+
+	switch (mbox->ps_status) {
+	case EVENT_ENTER_POWER_SAVE_FAIL:
+		wl1271_debug(DEBUG_PSM, "PSM entry failed");
+
+		if (!test_bit(WL1271_FLAG_PSM, &wl->flags)) {
+			/* remain in active mode */
+			wl->psm_entry_retry = 0;
+			break;
+		}
+
+		if (wl->psm_entry_retry < total_retries) {
+			wl->psm_entry_retry++;
+			ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE,
+						 wl->basic_rate, true);
+		} else {
+			wl1271_info("No ack to nullfunc from AP.");
+			wl->psm_entry_retry = 0;
+			*beacon_loss = true;
+		}
+		break;
+	case EVENT_ENTER_POWER_SAVE_SUCCESS:
+		wl->psm_entry_retry = 0;
+
+		/* enable beacon filtering */
+		ret = wl1271_acx_beacon_filter_opt(wl, true);
+		if (ret < 0)
+			break;
+
+		/* enable beacon early termination */
+		ret = wl1271_acx_bet_enable(wl, true);
+		if (ret < 0)
+			break;
+
+		/* go to extremely low power mode */
+		wl1271_ps_elp_sleep(wl);
+		break;
+	case EVENT_EXIT_POWER_SAVE_FAIL:
+		wl1271_debug(DEBUG_PSM, "PSM exit failed");
+
+		if (test_bit(WL1271_FLAG_PSM, &wl->flags)) {
+			wl->psm_entry_retry = 0;
+			break;
+		}
+
+		/* make sure the firmware goes to active mode - the frame to
+		   be sent next will indicate to the AP, that we are active. */
+		ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE,
+					 wl->basic_rate, false);
+		break;
+	case EVENT_EXIT_POWER_SAVE_SUCCESS:
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static void wl1271_event_rssi_trigger(struct wl1271 *wl,
+				      struct event_mailbox *mbox)
+{
+	enum nl80211_cqm_rssi_threshold_event event;
+	s8 metric = mbox->rssi_snr_trigger_metric[0];
+
+	wl1271_debug(DEBUG_EVENT, "RSSI trigger metric: %d", metric);
+
+	if (metric <= wl->rssi_thold)
+		event = NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW;
+	else
+		event = NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH;
+
+	if (event != wl->last_rssi_event)
+		ieee80211_cqm_rssi_notify(wl->vif, event, GFP_KERNEL);
+	wl->last_rssi_event = event;
+}
+
+static void wl1271_event_mbox_dump(struct event_mailbox *mbox)
+{
+	wl1271_debug(DEBUG_EVENT, "MBOX DUMP:");
+	wl1271_debug(DEBUG_EVENT, "\tvector: 0x%x", mbox->events_vector);
+	wl1271_debug(DEBUG_EVENT, "\tmask: 0x%x", mbox->events_mask);
+}
+
+static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
+{
+	int ret;
+	u32 vector;
+	bool beacon_loss = false;
+
+	wl1271_event_mbox_dump(mbox);
+
+	vector = le32_to_cpu(mbox->events_vector);
+	vector &= ~(le32_to_cpu(mbox->events_mask));
+	wl1271_debug(DEBUG_EVENT, "vector: 0x%x", vector);
+
+	if (vector & SCAN_COMPLETE_EVENT_ID) {
+		wl1271_debug(DEBUG_EVENT, "status: 0x%x",
+			     mbox->scheduled_scan_status);
+
+		wl1271_scan_stm(wl);
+	}
+
+	/* disable dynamic PS when requested by the firmware */
+	if (vector & SOFT_GEMINI_SENSE_EVENT_ID &&
+	    wl->bss_type == BSS_TYPE_STA_BSS) {
+		if (mbox->soft_gemini_sense_info)
+			ieee80211_disable_dyn_ps(wl->vif);
+		else
+			ieee80211_enable_dyn_ps(wl->vif);
+	}
+
+	/*
+	 * The BSS_LOSE_EVENT_ID is only needed while psm (and hence beacon
+	 * filtering) is enabled. Without PSM, the stack will receive all
+	 * beacons and can detect beacon loss by itself.
+	 *
+	 * As there's possibility that the driver disables PSM before receiving
+	 * BSS_LOSE_EVENT, beacon loss has to be reported to the stack.
+	 *
+	 */
+	if (vector & BSS_LOSE_EVENT_ID) {
+		wl1271_info("Beacon loss detected.");
+
+		/* indicate to the stack, that beacons have been lost */
+		beacon_loss = true;
+	}
+
+	if (vector & PS_REPORT_EVENT_ID) {
+		wl1271_debug(DEBUG_EVENT, "PS_REPORT_EVENT");
+		ret = wl1271_event_ps_report(wl, mbox, &beacon_loss);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (vector & PSPOLL_DELIVERY_FAILURE_EVENT_ID)
+		wl1271_event_pspoll_delivery_fail(wl);
+
+	if (vector & RSSI_SNR_TRIGGER_0_EVENT_ID) {
+		wl1271_debug(DEBUG_EVENT, "RSSI_SNR_TRIGGER_0_EVENT");
+		if (wl->vif)
+			wl1271_event_rssi_trigger(wl, mbox);
+	}
+
+	if (wl->vif && beacon_loss)
+		ieee80211_connection_loss(wl->vif);
+
+	return 0;
+}
+
+int wl1271_event_unmask(struct wl1271 *wl)
+{
+	int ret;
+
+	ret = wl1271_acx_event_mbox_mask(wl, ~(wl->event_mask));
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+void wl1271_event_mbox_config(struct wl1271 *wl)
+{
+	wl->mbox_ptr[0] = wl1271_read32(wl, REG_EVENT_MAILBOX_PTR);
+	wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox);
+
+	wl1271_debug(DEBUG_EVENT, "MBOX ptrs: 0x%x 0x%x",
+		     wl->mbox_ptr[0], wl->mbox_ptr[1]);
+}
+
+int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num)
+{
+	struct event_mailbox mbox;
+	int ret;
+
+	wl1271_debug(DEBUG_EVENT, "EVENT on mbox %d", mbox_num);
+
+	if (mbox_num > 1)
+		return -EINVAL;
+
+	/* first we read the mbox descriptor */
+	wl1271_read(wl, wl->mbox_ptr[mbox_num], &mbox,
+		    sizeof(struct event_mailbox), false);
+
+	/* process the descriptor */
+	ret = wl1271_event_process(wl, &mbox);
+	if (ret < 0)
+		return ret;
+
+	/* then we let the firmware know it can go on...*/
+	wl1271_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_EVENT_ACK);
+
+	return 0;
+}