Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

9 files changed, 127 insertions, 54 deletions

diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 317b7807175..552f9f4c73d 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -1436,6 +1436,10 @@ struct mac_iveiv_entry {
 #define MAC_WCID_ATTRIBUTE_CIPHER	FIELD32(0x0000000e)
 #define MAC_WCID_ATTRIBUTE_BSS_IDX	FIELD32(0x00000070)
 #define MAC_WCID_ATTRIBUTE_RX_WIUDF	FIELD32(0x00000380)
+#define MAC_WCID_ATTRIBUTE_CIPHER_EXT	FIELD32(0x00000400)
+#define MAC_WCID_ATTRIBUTE_BSS_IDX_EXT	FIELD32(0x00000800)
+#define MAC_WCID_ATTRIBUTE_WAPI_MCBC	FIELD32(0x00008000)
+#define MAC_WCID_ATTRIBUTE_WAPI_KEY_IDX	FIELD32(0xff000000)
 
 /*
  * SHARED_KEY_MODE:
@@ -1557,7 +1561,9 @@ struct mac_iveiv_entry {
  */
 
 /*
- * BBP 1: TX Antenna
+ * BBP 1: TX Antenna & Power
+ * POWER: 0 - normal, 1 - drop tx power by 6dBm, 2 - drop tx power by 12dBm,
+ *	3 - increase tx power by 6dBm
  */
 #define BBP1_TX_POWER			FIELD8(0x07)
 #define BBP1_TX_ANTENNA			FIELD8(0x18)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index ae20e6728b1..14c361ae87b 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1,9 +1,9 @@
 /*
+	Copyright (C) 2010 Ivo van Doorn <IvDoorn@gmail.com>
 	Copyright (C) 2009 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
 	Copyright (C) 2009 Gertjan van Wingerde <gwingerde@gmail.com>
 
 	Based on the original rt2800pci.c and rt2800usb.c.
-	  Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	  Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com>
 	  Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
 	  Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com>
@@ -41,10 +41,6 @@
 #include "rt2800lib.h"
 #include "rt2800.h"
 
-MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
-MODULE_DESCRIPTION("rt2800 library");
-MODULE_LICENSE("GPL");
-
 /*
  * Register access.
  * All access to the CSR registers will go through the methods
@@ -558,15 +554,28 @@ static void rt2800_config_wcid_attr(struct rt2x00_dev *rt2x00dev,
 
 	offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx);
 
-	rt2800_register_read(rt2x00dev, offset, &reg);
-	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
-			   !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
-	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
-			   (crypto->cmd == SET_KEY) * crypto->cipher);
-	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
-			   (crypto->cmd == SET_KEY) * crypto->bssidx);
-	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
-	rt2800_register_write(rt2x00dev, offset, reg);
+	if (crypto->cmd == SET_KEY) {
+		rt2800_register_read(rt2x00dev, offset, &reg);
+		rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
+				   !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
+		/*
+		 * Both the cipher as the BSS Idx numbers are split in a main
+		 * value of 3 bits, and a extended field for adding one additional
+		 * bit to the value.
+		 */
+		rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
+				   (crypto->cipher & 0x7));
+		rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER_EXT,
+				   (crypto->cipher & 0x8) >> 3);
+		rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
+				   (crypto->bssidx & 0x7));
+		rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX_EXT,
+				   (crypto->bssidx & 0x8) >> 3);
+		rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
+		rt2800_register_write(rt2x00dev, offset, reg);
+	} else {
+		rt2800_register_write(rt2x00dev, offset, 0);
+	}
 
 	offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
 
@@ -1079,7 +1088,7 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
 	u8 r1;
 
 	rt2800_bbp_read(rt2x00dev, 1, &r1);
-	rt2x00_set_field8(&reg, BBP1_TX_POWER, 0);
+	rt2x00_set_field8(&r1, BBP1_TX_POWER, 0);
 	rt2800_bbp_write(rt2x00dev, 1, r1);
 
 	rt2800_register_read(rt2x00dev, TX_PWR_CFG_0, &reg);
@@ -2497,6 +2506,18 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 				rt2x00_eeprom_addr(rt2x00dev,
 						   EEPROM_MAC_ADDR_0));
 
+	/*
+	 * As rt2800 has a global fallback table we cannot specify
+	 * more then one tx rate per frame but since the hw will
+	 * try several rates (based on the fallback table) we should
+	 * still initialize max_rates to the maximum number of rates
+	 * we are going to try. Otherwise mac80211 will truncate our
+	 * reported tx rates and the rc algortihm will end up with
+	 * incorrect data.
+	 */
+	rt2x00dev->hw->max_rates = 7;
+	rt2x00dev->hw->max_rate_tries = 1;
+
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
 
 	/*
@@ -2749,3 +2770,8 @@ const struct ieee80211_ops rt2800_mac80211_ops = {
 	.rfkill_poll		= rt2x00mac_rfkill_poll,
 };
 EXPORT_SYMBOL_GPL(rt2800_mac80211_ops);
+
+MODULE_AUTHOR(DRV_PROJECT ", Bartlomiej Zolnierkiewicz");
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("Ralink RT2800 library");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index b5a871eb888..e5ea670a18d 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -51,7 +51,7 @@
 /*
  * Allow hardware encryption to be disabled.
  */
-static int modparam_nohwcrypt = 1;
+static int modparam_nohwcrypt = 0;
 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
 
@@ -813,29 +813,24 @@ static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
 	struct txdone_entry_desc txdesc;
 	u32 word;
 	u32 reg;
-	u32 old_reg;
 	int wcid, ack, pid, tx_wcid, tx_ack, tx_pid;
 	u16 mcs, real_mcs;
+	int i;
 
 	/*
-	 * During each loop we will compare the freshly read
-	 * TX_STA_FIFO register value with the value read from
-	 * the previous loop. If the 2 values are equal then
-	 * we should stop processing because the chance it
-	 * quite big that the device has been unplugged and
-	 * we risk going into an endless loop.
+	 * TX_STA_FIFO is a stack of X entries, hence read TX_STA_FIFO
+	 * at most X times and also stop processing once the TX_STA_FIFO_VALID
+	 * flag is not set anymore.
+	 *
+	 * The legacy drivers use X=TX_RING_SIZE but state in a comment
+	 * that the TX_STA_FIFO stack has a size of 16. We stick to our
+	 * tx ring size for now.
 	 */
-	old_reg = 0;
-
-	while (1) {
+	for (i = 0; i < TX_ENTRIES; i++) {
 		rt2800_register_read(rt2x00dev, TX_STA_FIFO, &reg);
 		if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID))
 			break;
 
-		if (old_reg == reg)
-			break;
-		old_reg = reg;
-
 		wcid    = rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
 		ack     = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
 		pid     = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
@@ -903,8 +898,12 @@ static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
 			txdesc.retry = 7;
 		}
 
-		__set_bit(TXDONE_FALLBACK, &txdesc.flags);
-
+		/*
+		 * the frame was retried at least once
+		 * -> hw used fallback rates
+		 */
+		if (txdesc.retry)
+			__set_bit(TXDONE_FALLBACK, &txdesc.flags);
 
 		rt2x00pci_txdone(entry, &txdesc);
 	}
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index c437960de3e..f18c12a19cc 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -45,7 +45,7 @@
 /*
  * Allow hardware encryption to be disabled.
  */
-static int modparam_nohwcrypt = 1;
+static int modparam_nohwcrypt = 0;
 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 0b8efe8e678..339cc84bf4f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -236,8 +236,7 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	 */
 	success =
 	    test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
-	    test_bit(TXDONE_UNKNOWN, &txdesc->flags) ||
-	    test_bit(TXDONE_FALLBACK, &txdesc->flags);
+	    test_bit(TXDONE_UNKNOWN, &txdesc->flags);
 
 	/*
 	 * Update TX statistics.
@@ -259,11 +258,22 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	/*
 	 * Frame was send with retries, hardware tried
 	 * different rates to send out the frame, at each
-	 * retry it lowered the rate 1 step.
+	 * retry it lowered the rate 1 step except when the
+	 * lowest rate was used.
 	 */
 	for (i = 0; i < retry_rates && i < IEEE80211_TX_MAX_RATES; i++) {
 		tx_info->status.rates[i].idx = rate_idx - i;
 		tx_info->status.rates[i].flags = rate_flags;
+
+		if (rate_idx - i == 0) {
+			/*
+			 * The lowest rate (index 0) was used until the
+			 * number of max retries was reached.
+			 */
+			tx_info->status.rates[i].count = retry_rates - i;
+			i++;
+			break;
+		}
 		tx_info->status.rates[i].count = 1;
 	}
 	if (i < (IEEE80211_TX_MAX_RATES - 1))
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 35858b178e8..f9163714711 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -353,13 +353,18 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	/*
 	 * Check if more fragments are pending
 	 */
-	if (ieee80211_has_morefrags(hdr->frame_control) ||
-	    (tx_info->flags & IEEE80211_TX_CTL_MORE_FRAMES)) {
+	if (ieee80211_has_morefrags(hdr->frame_control)) {
 		__set_bit(ENTRY_TXD_BURST, &txdesc->flags);
 		__set_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags);
 	}
 
 	/*
+	 * Check if more frames (!= fragments) are pending
+	 */
+	if (tx_info->flags & IEEE80211_TX_CTL_MORE_FRAMES)
+		__set_bit(ENTRY_TXD_BURST, &txdesc->flags);
+
+	/*
 	 * Beacons and probe responses require the tsf timestamp
 	 * to be inserted into the frame, except for a frame that has been injected
 	 * through a monitor interface. This latter is needed for testing a
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index f79170849ad..bd54f55a8cb 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -213,9 +213,16 @@ struct rxdone_entry_desc {
 /**
  * enum txdone_entry_desc_flags: Flags for &struct txdone_entry_desc
  *
+ * Every txdone report has to contain the basic result of the
+ * transmission, either &TXDONE_UNKNOWN, &TXDONE_SUCCESS or
+ * &TXDONE_FAILURE. The flag &TXDONE_FALLBACK can be used in
+ * conjunction with all of these flags but should only be set
+ * if retires > 0. The flag &TXDONE_EXCESSIVE_RETRY can only be used
+ * in conjunction with &TXDONE_FAILURE.
+ *
  * @TXDONE_UNKNOWN: Hardware could not determine success of transmission.
  * @TXDONE_SUCCESS: Frame was successfully send
- * @TXDONE_FALLBACK: Frame was successfully send using a fallback rate.
+ * @TXDONE_FALLBACK: Hardware used fallback rates for retries
  * @TXDONE_FAILURE: Frame was not successfully send
  * @TXDONE_EXCESSIVE_RETRY: In addition to &TXDONE_FAILURE, the
  *	frame transmission failed due to excessive retries.
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 243df08ae91..7ca383478ee 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -931,6 +931,9 @@ static void rt61pci_config_retry_limit(struct rt2x00_dev *rt2x00dev,
 	u32 reg;
 
 	rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, &reg);
+	rt2x00_set_field32(&reg, TXRX_CSR4_OFDM_TX_RATE_DOWN, 1);
+	rt2x00_set_field32(&reg, TXRX_CSR4_OFDM_TX_RATE_STEP, 0);
+	rt2x00_set_field32(&reg, TXRX_CSR4_OFDM_TX_FALLBACK_CCK, 0);
 	rt2x00_set_field32(&reg, TXRX_CSR4_LONG_RETRY_LIMIT,
 			   libconf->conf->long_frame_max_tx_count);
 	rt2x00_set_field32(&reg, TXRX_CSR4_SHORT_RETRY_LIMIT,
@@ -2049,29 +2052,24 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
 	struct txdone_entry_desc txdesc;
 	u32 word;
 	u32 reg;
-	u32 old_reg;
 	int type;
 	int index;
+	int i;
 
 	/*
-	 * During each loop we will compare the freshly read
-	 * STA_CSR4 register value with the value read from
-	 * the previous loop. If the 2 values are equal then
-	 * we should stop processing because the chance is
-	 * quite big that the device has been unplugged and
-	 * we risk going into an endless loop.
+	 * TX_STA_FIFO is a stack of X entries, hence read TX_STA_FIFO
+	 * at most X times and also stop processing once the TX_STA_FIFO_VALID
+	 * flag is not set anymore.
+	 *
+	 * The legacy drivers use X=TX_RING_SIZE but state in a comment
+	 * that the TX_STA_FIFO stack has a size of 16. We stick to our
+	 * tx ring size for now.
 	 */
-	old_reg = 0;
-
-	while (1) {
+	for (i = 0; i < TX_ENTRIES; i++) {
 		rt2x00pci_register_read(rt2x00dev, STA_CSR4, &reg);
 		if (!rt2x00_get_field32(reg, STA_CSR4_VALID))
 			break;
 
-		if (old_reg == reg)
-			break;
-		old_reg = reg;
-
 		/*
 		 * Skip this entry when it contains an invalid
 		 * queue identication number.
@@ -2130,6 +2128,13 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
 		}
 		txdesc.retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT);
 
+		/*
+		 * the frame was retried at least once
+		 * -> hw used fallback rates
+		 */
+		if (txdesc.retry)
+			__set_bit(TXDONE_FALLBACK, &txdesc.flags);
+
 		rt2x00pci_txdone(entry, &txdesc);
 	}
 }
@@ -2587,6 +2592,18 @@ static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 						   EEPROM_MAC_ADDR_0));
 
 	/*
+	 * As rt61 has a global fallback table we cannot specify
+	 * more then one tx rate per frame but since the hw will
+	 * try several rates (based on the fallback table) we should
+	 * still initialize max_rates to the maximum number of rates
+	 * we are going to try. Otherwise mac80211 will truncate our
+	 * reported tx rates and the rc algortihm will end up with
+	 * incorrect data.
+	 */
+	rt2x00dev->hw->max_rates = 7;
+	rt2x00dev->hw->max_rate_tries = 1;
+
+	/*
 	 * Initialize hw_mode information.
 	 */
 	spec->supported_bands = SUPPORT_BAND_2GHZ;
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 113ad690f9d..d06d90f003e 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -816,6 +816,9 @@ static void rt73usb_config_retry_limit(struct rt2x00_dev *rt2x00dev,
 	u32 reg;
 
 	rt2x00usb_register_read(rt2x00dev, TXRX_CSR4, &reg);
+	rt2x00_set_field32(&reg, TXRX_CSR4_OFDM_TX_RATE_DOWN, 1);
+	rt2x00_set_field32(&reg, TXRX_CSR4_OFDM_TX_RATE_STEP, 0);
+	rt2x00_set_field32(&reg, TXRX_CSR4_OFDM_TX_FALLBACK_CCK, 0);
 	rt2x00_set_field32(&reg, TXRX_CSR4_LONG_RETRY_LIMIT,
 			   libconf->conf->long_frame_max_tx_count);
 	rt2x00_set_field32(&reg, TXRX_CSR4_SHORT_RETRY_LIMIT,