Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26: (1090 commits)
  [NET]: Fix and allocate less memory for ->priv'less netdevices
  [IPV6]: Fix dangling references on error in fib6_add().
  [NETLABEL]: Fix NULL deref in netlbl_unlabel_staticlist_gen() if ifindex not found
  [PKT_SCHED]: Fix datalen check in tcf_simp_init().
  [INET]: Uninline the __inet_inherit_port call.
  [INET]: Drop the inet_inherit_port() call.
  SCTP: Initialize partial_bytes_acked to 0, when all of the data is acked.
  [netdrvr] forcedeth: internal simplifications; changelog removal
  phylib: factor out get_phy_id from within get_phy_device
  PHY: add BCM5464 support to broadcom PHY driver
  cxgb3: Fix __must_check warning with dev_dbg.
  tc35815: Statistics cleanup
  natsemi: fix MMIO for PPC 44x platforms
  [TIPC]: Cleanup of TIPC reference table code
  [TIPC]: Optimized initialization of TIPC reference table
  [TIPC]: Remove inlining of reference table locking routines
  e1000: convert uint16_t style integers to u16
  ixgb: convert uint16_t style integers to u16
  sb1000.c: make const arrays static
  sb1000.c: stop inlining largish static functions
  ...

1 files changed, 425 insertions, 404 deletions

diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index ad2e7d53b3d..468a31c8c11 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
@@ -24,6 +24,7 @@
 	Supported chipsets: RT2561, RT2561s, RT2661.
  */
 
+#include <linux/crc-itu-t.h>
 #include <linux/delay.h>
 #include <linux/etherdevice.h>
 #include <linux/init.h>
@@ -155,6 +156,12 @@ rf_write:
 	rt2x00_rf_write(rt2x00dev, word, value);
 }
 
+#ifdef CONFIG_RT61PCI_LEDS
+/*
+ * This function is only called from rt61pci_led_brightness()
+ * make gcc happy by placing this function inside the
+ * same ifdef statement as the caller.
+ */
 static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev,
 				const u8 command, const u8 token,
 				const u8 arg0, const u8 arg1)
@@ -181,6 +188,7 @@ static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&reg, HOST_CMD_CSR_INTERRUPT_MCU, 1);
 	rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg);
 }
+#endif /* CONFIG_RT61PCI_LEDS */
 
 static void rt61pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
 {
@@ -262,82 +270,162 @@ static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 	u32 reg;
 
 	rt2x00pci_register_read(rt2x00dev, MAC_CSR13, &reg);
-	return rt2x00_get_field32(reg, MAC_CSR13_BIT5);;
+	return rt2x00_get_field32(reg, MAC_CSR13_BIT5);
 }
 #else
 #define rt61pci_rfkill_poll	NULL
 #endif /* CONFIG_RT61PCI_RFKILL */
 
-/*
- * Configuration handlers.
- */
-static void rt61pci_config_mac_addr(struct rt2x00_dev *rt2x00dev, __le32 *mac)
+#ifdef CONFIG_RT61PCI_LEDS
+static void rt61pci_brightness_set(struct led_classdev *led_cdev,
+				   enum led_brightness brightness)
 {
-	u32 tmp;
-
-	tmp = le32_to_cpu(mac[1]);
-	rt2x00_set_field32(&tmp, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff);
-	mac[1] = cpu_to_le32(tmp);
-
-	rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR2, mac,
-				      (2 * sizeof(__le32)));
+	struct rt2x00_led *led =
+	    container_of(led_cdev, struct rt2x00_led, led_dev);
+	unsigned int enabled = brightness != LED_OFF;
+	unsigned int a_mode =
+	    (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
+	unsigned int bg_mode =
+	    (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
+
+	if (led->type == LED_TYPE_RADIO) {
+		rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
+				   MCU_LEDCS_RADIO_STATUS, enabled);
+
+		rt61pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff,
+				    (led->rt2x00dev->led_mcu_reg & 0xff),
+				    ((led->rt2x00dev->led_mcu_reg >> 8)));
+	} else if (led->type == LED_TYPE_ASSOC) {
+		rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
+				   MCU_LEDCS_LINK_BG_STATUS, bg_mode);
+		rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
+				   MCU_LEDCS_LINK_A_STATUS, a_mode);
+
+		rt61pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff,
+				    (led->rt2x00dev->led_mcu_reg & 0xff),
+				    ((led->rt2x00dev->led_mcu_reg >> 8)));
+	} else if (led->type == LED_TYPE_QUALITY) {
+		/*
+		 * The brightness is divided into 6 levels (0 - 5),
+		 * this means we need to convert the brightness
+		 * argument into the matching level within that range.
+		 */
+		rt61pci_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
+				    brightness / (LED_FULL / 6), 0);
+	}
 }
 
-static void rt61pci_config_bssid(struct rt2x00_dev *rt2x00dev, __le32 *bssid)
+static int rt61pci_blink_set(struct led_classdev *led_cdev,
+			     unsigned long *delay_on,
+			     unsigned long *delay_off)
 {
-	u32 tmp;
+	struct rt2x00_led *led =
+	    container_of(led_cdev, struct rt2x00_led, led_dev);
+	u32 reg;
 
-	tmp = le32_to_cpu(bssid[1]);
-	rt2x00_set_field32(&tmp, MAC_CSR5_BSS_ID_MASK, 3);
-	bssid[1] = cpu_to_le32(tmp);
+	rt2x00pci_register_read(led->rt2x00dev, MAC_CSR14, &reg);
+	rt2x00_set_field32(&reg, MAC_CSR14_ON_PERIOD, *delay_on);
+	rt2x00_set_field32(&reg, MAC_CSR14_OFF_PERIOD, *delay_off);
+	rt2x00pci_register_write(led->rt2x00dev, MAC_CSR14, reg);
 
-	rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR4, bssid,
-				      (2 * sizeof(__le32)));
+	return 0;
 }
+#endif /* CONFIG_RT61PCI_LEDS */
 
-static void rt61pci_config_type(struct rt2x00_dev *rt2x00dev, const int type,
-				const int tsf_sync)
+/*
+ * Configuration handlers.
+ */
+static void rt61pci_config_filter(struct rt2x00_dev *rt2x00dev,
+				  const unsigned int filter_flags)
 {
 	u32 reg;
 
 	/*
-	 * Clear current synchronisation setup.
-	 * For the Beacon base registers we only need to clear
-	 * the first byte since that byte contains the VALID and OWNER
-	 * bits which (when set to 0) will invalidate the entire beacon.
+	 * Start configuration steps.
+	 * Note that the version error will always be dropped
+	 * and broadcast frames will always be accepted since
+	 * there is no filter for it at this time.
 	 */
-	rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0);
-	rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
-	rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
-	rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
-	rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
+	rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
+	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CRC,
+			   !(filter_flags & FIF_FCSFAIL));
+	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_PHYSICAL,
+			   !(filter_flags & FIF_PLCPFAIL));
+	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CONTROL,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_NOT_TO_ME,
+			   !(filter_flags & FIF_PROMISC_IN_BSS));
+	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_TO_DS,
+			   !(filter_flags & FIF_PROMISC_IN_BSS) &&
+			   !rt2x00dev->intf_ap_count);
+	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_VERSION_ERROR, 1);
+	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_MULTICAST,
+			   !(filter_flags & FIF_ALLMULTI));
+	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_BROADCAST, 0);
+	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_ACK_CTS,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
+}
 
-	/*
-	 * Enable synchronisation.
-	 */
-	rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
-	rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
-	rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE,
-			  (tsf_sync == TSF_SYNC_BEACON));
-	rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
-	rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, tsf_sync);
-	rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
+static void rt61pci_config_intf(struct rt2x00_dev *rt2x00dev,
+				struct rt2x00_intf *intf,
+				struct rt2x00intf_conf *conf,
+				const unsigned int flags)
+{
+	unsigned int beacon_base;
+	u32 reg;
+
+	if (flags & CONFIG_UPDATE_TYPE) {
+		/*
+		 * Clear current synchronisation setup.
+		 * For the Beacon base registers we only need to clear
+		 * the first byte since that byte contains the VALID and OWNER
+		 * bits which (when set to 0) will invalidate the entire beacon.
+		 */
+		beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
+		rt2x00pci_register_write(rt2x00dev, beacon_base, 0);
+
+		/*
+		 * Enable synchronisation.
+		 */
+		rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
+		rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
+		rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, conf->sync);
+		rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
+		rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
+	}
+
+	if (flags & CONFIG_UPDATE_MAC) {
+		reg = le32_to_cpu(conf->mac[1]);
+		rt2x00_set_field32(&reg, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff);
+		conf->mac[1] = cpu_to_le32(reg);
+
+		rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR2,
+					      conf->mac, sizeof(conf->mac));
+	}
+
+	if (flags & CONFIG_UPDATE_BSSID) {
+		reg = le32_to_cpu(conf->bssid[1]);
+		rt2x00_set_field32(&reg, MAC_CSR5_BSS_ID_MASK, 3);
+		conf->bssid[1] = cpu_to_le32(reg);
+
+		rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR4,
+					      conf->bssid, sizeof(conf->bssid));
+	}
 }
 
-static void rt61pci_config_preamble(struct rt2x00_dev *rt2x00dev,
-				    const int short_preamble,
-				    const int ack_timeout,
-				    const int ack_consume_time)
+static void rt61pci_config_erp(struct rt2x00_dev *rt2x00dev,
+			       struct rt2x00lib_erp *erp)
 {
 	u32 reg;
 
 	rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
-	rt2x00_set_field32(&reg, TXRX_CSR0_RX_ACK_TIMEOUT, ack_timeout);
+	rt2x00_set_field32(&reg, TXRX_CSR0_RX_ACK_TIMEOUT, erp->ack_timeout);
 	rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
 
 	rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, &reg);
 	rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_PREAMBLE,
-			   !!short_preamble);
+			   !!erp->short_preamble);
 	rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg);
 }
 
@@ -427,27 +515,21 @@ static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
 	case ANTENNA_HW_DIVERSITY:
 		rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
 		rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
-				  (rt2x00dev->curr_hwmode != HWMODE_A));
+				  (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ));
 		break;
 	case ANTENNA_A:
 		rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 		rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
-		if (rt2x00dev->curr_hwmode == HWMODE_A)
+		if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
 			rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
 		else
 			rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
 		break;
-	case ANTENNA_SW_DIVERSITY:
-		/*
-		 * NOTE: We should never come here because rt2x00lib is
-		 * supposed to catch this and send us the correct antenna
-		 * explicitely. However we are nog going to bug about this.
-		 * Instead, just default to antenna B.
-		 */
 	case ANTENNA_B:
+	default:
 		rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 		rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
-		if (rt2x00dev->curr_hwmode == HWMODE_A)
+		if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
 			rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
 		else
 			rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
@@ -486,14 +568,8 @@ static void rt61pci_config_antenna_2x(struct rt2x00_dev *rt2x00dev,
 		rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 		rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
 		break;
-	case ANTENNA_SW_DIVERSITY:
-		/*
-		 * NOTE: We should never come here because rt2x00lib is
-		 * supposed to catch this and send us the correct antenna
-		 * explicitely. However we are nog going to bug about this.
-		 * Instead, just default to antenna B.
-		 */
 	case ANTENNA_B:
+	default:
 		rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 		rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
 		break;
@@ -531,10 +607,6 @@ static void rt61pci_config_antenna_2529(struct rt2x00_dev *rt2x00dev,
 	rt61pci_bbp_read(rt2x00dev, 4, &r4);
 	rt61pci_bbp_read(rt2x00dev, 77, &r77);
 
-	/* FIXME: Antenna selection for the rf 2529 is very confusing in the
-	 * legacy driver. The code below should be ok for non-diversity setups.
-	 */
-
 	/*
 	 * Configure the RX antenna.
 	 */
@@ -544,15 +616,14 @@ static void rt61pci_config_antenna_2529(struct rt2x00_dev *rt2x00dev,
 		rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
 		rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 0);
 		break;
-	case ANTENNA_SW_DIVERSITY:
 	case ANTENNA_HW_DIVERSITY:
 		/*
-		 * NOTE: We should never come here because rt2x00lib is
-		 * supposed to catch this and send us the correct antenna
-		 * explicitely. However we are nog going to bug about this.
-		 * Instead, just default to antenna B.
+		 * FIXME: Antenna selection for the rf 2529 is very confusing
+		 * in the legacy driver. Just default to antenna B until the
+		 * legacy code can be properly translated into rt2x00 code.
 		 */
 	case ANTENNA_B:
+	default:
 		rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 		rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
 		rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1);
@@ -603,7 +674,14 @@ static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev,
 	unsigned int i;
 	u32 reg;
 
-	if (rt2x00dev->curr_hwmode == HWMODE_A) {
+	/*
+	 * We should never come here because rt2x00lib is supposed
+	 * to catch this and send us the correct antenna explicitely.
+	 */
+	BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY ||
+	       ant->tx == ANTENNA_SW_DIVERSITY);
+
+	if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
 		sel = antenna_sel_a;
 		lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
 	} else {
@@ -617,10 +695,9 @@ static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev,
 	rt2x00pci_register_read(rt2x00dev, PHY_CSR0, &reg);
 
 	rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_BG,
-			   (rt2x00dev->curr_hwmode == HWMODE_B ||
-			    rt2x00dev->curr_hwmode == HWMODE_G));
+			   rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
 	rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_A,
-			   (rt2x00dev->curr_hwmode == HWMODE_A));
+			   rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
 
 	rt2x00pci_register_write(rt2x00dev, PHY_CSR0, reg);
 
@@ -667,8 +744,8 @@ static void rt61pci_config_duration(struct rt2x00_dev *rt2x00dev,
 }
 
 static void rt61pci_config(struct rt2x00_dev *rt2x00dev,
-			   const unsigned int flags,
-			   struct rt2x00lib_conf *libconf)
+			   struct rt2x00lib_conf *libconf,
+			   const unsigned int flags)
 {
 	if (flags & CONFIG_UPDATE_PHYMODE)
 		rt61pci_config_phymode(rt2x00dev, libconf->basic_rates);
@@ -684,78 +761,6 @@ static void rt61pci_config(struct rt2x00_dev *rt2x00dev,
 }
 
 /*
- * LED functions.
- */
-static void rt61pci_enable_led(struct rt2x00_dev *rt2x00dev)
-{
-	u32 reg;
-	u8 arg0;
-	u8 arg1;
-
-	rt2x00pci_register_read(rt2x00dev, MAC_CSR14, &reg);
-	rt2x00_set_field32(&reg, MAC_CSR14_ON_PERIOD, 70);
-	rt2x00_set_field32(&reg, MAC_CSR14_OFF_PERIOD, 30);
-	rt2x00pci_register_write(rt2x00dev, MAC_CSR14, reg);
-
-	rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_RADIO_STATUS, 1);
-	rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_A_STATUS,
-			   (rt2x00dev->rx_status.phymode == MODE_IEEE80211A));
-	rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_BG_STATUS,
-			   (rt2x00dev->rx_status.phymode != MODE_IEEE80211A));
-
-	arg0 = rt2x00dev->led_reg & 0xff;
-	arg1 = (rt2x00dev->led_reg >> 8) & 0xff;
-
-	rt61pci_mcu_request(rt2x00dev, MCU_LED, 0xff, arg0, arg1);
-}
-
-static void rt61pci_disable_led(struct rt2x00_dev *rt2x00dev)
-{
-	u16 led_reg;
-	u8 arg0;
-	u8 arg1;
-
-	led_reg = rt2x00dev->led_reg;
-	rt2x00_set_field16(&led_reg, MCU_LEDCS_RADIO_STATUS, 0);
-	rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_BG_STATUS, 0);
-	rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_A_STATUS, 0);
-
-	arg0 = led_reg & 0xff;
-	arg1 = (led_reg >> 8) & 0xff;
-
-	rt61pci_mcu_request(rt2x00dev, MCU_LED, 0xff, arg0, arg1);
-}
-
-static void rt61pci_activity_led(struct rt2x00_dev *rt2x00dev, int rssi)
-{
-	u8 led;
-
-	if (rt2x00dev->led_mode != LED_MODE_SIGNAL_STRENGTH)
-		return;
-
-	/*
-	 * Led handling requires a positive value for the rssi,
-	 * to do that correctly we need to add the correction.
-	 */
-	rssi += rt2x00dev->rssi_offset;
-
-	if (rssi <= 30)
-		led = 0;
-	else if (rssi <= 39)
-		led = 1;
-	else if (rssi <= 49)
-		led = 2;
-	else if (rssi <= 53)
-		led = 3;
-	else if (rssi <= 63)
-		led = 4;
-	else
-		led = 5;
-
-	rt61pci_mcu_request(rt2x00dev, MCU_LED_STRENGTH, 0xff, led, 0);
-}
-
-/*
  * Link tuning
  */
 static void rt61pci_link_stats(struct rt2x00_dev *rt2x00dev,
@@ -789,17 +794,12 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev)
 	u8 up_bound;
 	u8 low_bound;
 
-	/*
-	 * Update Led strength
-	 */
-	rt61pci_activity_led(rt2x00dev, rssi);
-
 	rt61pci_bbp_read(rt2x00dev, 17, &r17);
 
 	/*
 	 * Determine r17 bounds.
 	 */
-	if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) {
+	if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
 		low_bound = 0x28;
 		up_bound = 0x48;
 		if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
@@ -816,6 +816,13 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev)
 	}
 
 	/*
+	 * If we are not associated, we should go straight to the
+	 * dynamic CCA tuning.
+	 */
+	if (!rt2x00dev->intf_associated)
+		goto dynamic_cca_tune;
+
+	/*
 	 * Special big-R17 for very short distance
 	 */
 	if (rssi >= -35) {
@@ -866,6 +873,8 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev)
 		return;
 	}
 
+dynamic_cca_tune:
+
 	/*
 	 * r17 does not yet exceed upper limit, continue and base
 	 * the r17 tuning on the false CCA count.
@@ -882,7 +891,7 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev)
 }
 
 /*
- * Firmware name function.
+ * Firmware functions
  */
 static char *rt61pci_get_firmware_name(struct rt2x00_dev *rt2x00dev)
 {
@@ -906,9 +915,23 @@ static char *rt61pci_get_firmware_name(struct rt2x00_dev *rt2x00dev)
 	return fw_name;
 }
 
-/*
- * Initialization functions.
- */
+static u16 rt61pci_get_firmware_crc(void *data, const size_t len)
+{
+	u16 crc;
+
+	/*
+	 * Use the crc itu-t algorithm.
+	 * The last 2 bytes in the firmware array are the crc checksum itself,
+	 * this means that we should never pass those 2 bytes to the crc
+	 * algorithm.
+	 */
+	crc = crc_itu_t(0, data, len - 2);
+	crc = crc_itu_t_byte(crc, 0);
+	crc = crc_itu_t_byte(crc, 0);
+
+	return crc;
+}
+
 static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, void *data,
 				 const size_t len)
 {
@@ -989,50 +1012,55 @@ static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, void *data,
 	return 0;
 }
 
+/*
+ * Initialization functions.
+ */
 static void rt61pci_init_rxentry(struct rt2x00_dev *rt2x00dev,
-				 struct data_entry *entry)
+				 struct queue_entry *entry)
 {
-	__le32 *rxd = entry->priv;
+	struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data;
 	u32 word;
 
-	rt2x00_desc_read(rxd, 5, &word);
+	rt2x00_desc_read(priv_rx->desc, 5, &word);
 	rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS,
-			   entry->data_dma);
-	rt2x00_desc_write(rxd, 5, word);
+			   priv_rx->data_dma);
+	rt2x00_desc_write(priv_rx->desc, 5, word);
 
-	rt2x00_desc_read(rxd, 0, &word);
+	rt2x00_desc_read(priv_rx->desc, 0, &word);
 	rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1);
-	rt2x00_desc_write(rxd, 0, word);
+	rt2x00_desc_write(priv_rx->desc, 0, word);
 }
 
 static void rt61pci_init_txentry(struct rt2x00_dev *rt2x00dev,
-				 struct data_entry *entry)
+				 struct queue_entry *entry)
 {
-	__le32 *txd = entry->priv;
+	struct queue_entry_priv_pci_tx *priv_tx = entry->priv_data;
 	u32 word;
 
-	rt2x00_desc_read(txd, 1, &word);
+	rt2x00_desc_read(priv_tx->desc, 1, &word);
 	rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1);
-	rt2x00_desc_write(txd, 1, word);
+	rt2x00_desc_write(priv_tx->desc, 1, word);
 
-	rt2x00_desc_read(txd, 5, &word);
-	rt2x00_set_field32(&word, TXD_W5_PID_TYPE, entry->ring->queue_idx);
+	rt2x00_desc_read(priv_tx->desc, 5, &word);
+	rt2x00_set_field32(&word, TXD_W5_PID_TYPE, entry->queue->qid);
 	rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, entry->entry_idx);
-	rt2x00_desc_write(txd, 5, word);
+	rt2x00_desc_write(priv_tx->desc, 5, word);
 
-	rt2x00_desc_read(txd, 6, &word);
+	rt2x00_desc_read(priv_tx->desc, 6, &word);
 	rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS,
-			   entry->data_dma);
-	rt2x00_desc_write(txd, 6, word);
+			   priv_tx->data_dma);
+	rt2x00_desc_write(priv_tx->desc, 6, word);
 
-	rt2x00_desc_read(txd, 0, &word);
+	rt2x00_desc_read(priv_tx->desc, 0, &word);
 	rt2x00_set_field32(&word, TXD_W0_VALID, 0);
 	rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0);
-	rt2x00_desc_write(txd, 0, word);
+	rt2x00_desc_write(priv_tx->desc, 0, word);
 }
 
-static int rt61pci_init_rings(struct rt2x00_dev *rt2x00dev)
+static int rt61pci_init_queues(struct rt2x00_dev *rt2x00dev)
 {
+	struct queue_entry_priv_pci_rx *priv_rx;
+	struct queue_entry_priv_pci_tx *priv_tx;
 	u32 reg;
 
 	/*
@@ -1040,59 +1068,55 @@ static int rt61pci_init_rings(struct rt2x00_dev *rt2x00dev)
 	 */
 	rt2x00pci_register_read(rt2x00dev, TX_RING_CSR0, &reg);
 	rt2x00_set_field32(&reg, TX_RING_CSR0_AC0_RING_SIZE,
-			   rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].stats.limit);
+			   rt2x00dev->tx[0].limit);
 	rt2x00_set_field32(&reg, TX_RING_CSR0_AC1_RING_SIZE,
-			   rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].stats.limit);
+			   rt2x00dev->tx[1].limit);
 	rt2x00_set_field32(&reg, TX_RING_CSR0_AC2_RING_SIZE,
-			   rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA2].stats.limit);
+			   rt2x00dev->tx[2].limit);
 	rt2x00_set_field32(&reg, TX_RING_CSR0_AC3_RING_SIZE,
-			   rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA3].stats.limit);
+			   rt2x00dev->tx[3].limit);
 	rt2x00pci_register_write(rt2x00dev, TX_RING_CSR0, reg);
 
 	rt2x00pci_register_read(rt2x00dev, TX_RING_CSR1, &reg);
-	rt2x00_set_field32(&reg, TX_RING_CSR1_MGMT_RING_SIZE,
-			   rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA4].stats.limit);
 	rt2x00_set_field32(&reg, TX_RING_CSR1_TXD_SIZE,
-			   rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].desc_size /
-			   4);
+			   rt2x00dev->tx[0].desc_size / 4);
 	rt2x00pci_register_write(rt2x00dev, TX_RING_CSR1, reg);
 
+	priv_tx = rt2x00dev->tx[0].entries[0].priv_data;
 	rt2x00pci_register_read(rt2x00dev, AC0_BASE_CSR, &reg);
 	rt2x00_set_field32(&reg, AC0_BASE_CSR_RING_REGISTER,
-			   rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].data_dma);
+			   priv_tx->desc_dma);
 	rt2x00pci_register_write(rt2x00dev, AC0_BASE_CSR, reg);
 
+	priv_tx = rt2x00dev->tx[1].entries[0].priv_data;
 	rt2x00pci_register_read(rt2x00dev, AC1_BASE_CSR, &reg);
 	rt2x00_set_field32(&reg, AC1_BASE_CSR_RING_REGISTER,
-			   rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].data_dma);
+			   priv_tx->desc_dma);
 	rt2x00pci_register_write(rt2x00dev, AC1_BASE_CSR, reg);
 
+	priv_tx = rt2x00dev->tx[2].entries[0].priv_data;
 	rt2x00pci_register_read(rt2x00dev, AC2_BASE_CSR, &reg);
 	rt2x00_set_field32(&reg, AC2_BASE_CSR_RING_REGISTER,
-			   rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA2].data_dma);
+			   priv_tx->desc_dma);
 	rt2x00pci_register_write(rt2x00dev, AC2_BASE_CSR, reg);
 
+	priv_tx = rt2x00dev->tx[3].entries[0].priv_data;
 	rt2x00pci_register_read(rt2x00dev, AC3_BASE_CSR, &reg);
 	rt2x00_set_field32(&reg, AC3_BASE_CSR_RING_REGISTER,
-			   rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA3].data_dma);
+			   priv_tx->desc_dma);
 	rt2x00pci_register_write(rt2x00dev, AC3_BASE_CSR, reg);
 
-	rt2x00pci_register_read(rt2x00dev, MGMT_BASE_CSR, &reg);
-	rt2x00_set_field32(&reg, MGMT_BASE_CSR_RING_REGISTER,
-			   rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA4].data_dma);
-	rt2x00pci_register_write(rt2x00dev, MGMT_BASE_CSR, reg);
-
 	rt2x00pci_register_read(rt2x00dev, RX_RING_CSR, &reg);
-	rt2x00_set_field32(&reg, RX_RING_CSR_RING_SIZE,
-			   rt2x00dev->rx->stats.limit);
+	rt2x00_set_field32(&reg, RX_RING_CSR_RING_SIZE, rt2x00dev->rx->limit);
 	rt2x00_set_field32(&reg, RX_RING_CSR_RXD_SIZE,
 			   rt2x00dev->rx->desc_size / 4);
 	rt2x00_set_field32(&reg, RX_RING_CSR_RXD_WRITEBACK_SIZE, 4);
 	rt2x00pci_register_write(rt2x00dev, RX_RING_CSR, reg);
 
+	priv_rx = rt2x00dev->rx->entries[0].priv_data;
 	rt2x00pci_register_read(rt2x00dev, RX_BASE_CSR, &reg);
 	rt2x00_set_field32(&reg, RX_BASE_CSR_RING_REGISTER,
-			   rt2x00dev->rx->data_dma);
+			   priv_rx->desc_dma);
 	rt2x00pci_register_write(rt2x00dev, RX_BASE_CSR, reg);
 
 	rt2x00pci_register_read(rt2x00dev, TX_DMA_DST_CSR, &reg);
@@ -1100,7 +1124,6 @@ static int rt61pci_init_rings(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC1, 2);
 	rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC2, 2);
 	rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC3, 2);
-	rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_MGMT, 0);
 	rt2x00pci_register_write(rt2x00dev, TX_DMA_DST_CSR, reg);
 
 	rt2x00pci_register_read(rt2x00dev, LOAD_TX_RING_CSR, &reg);
@@ -1108,7 +1131,6 @@ static int rt61pci_init_rings(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC1, 1);
 	rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC2, 1);
 	rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC3, 1);
-	rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_MGMT, 1);
 	rt2x00pci_register_write(rt2x00dev, LOAD_TX_RING_CSR, reg);
 
 	rt2x00pci_register_read(rt2x00dev, RX_CNTL_CSR, &reg);
@@ -1224,6 +1246,17 @@ static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev)
 	rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
 
 	/*
+	 * Clear all beacons
+	 * For the Beacon base registers we only need to clear
+	 * the first byte since that byte contains the VALID and OWNER
+	 * bits which (when set to 0) will invalidate the entire beacon.
+	 */
+	rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
+	rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
+	rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
+	rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
+
+	/*
 	 * We must clear the error counters.
 	 * These registers are cleared on read,
 	 * so we may pass a useless variable to store the value.
@@ -1296,19 +1329,15 @@ continue_csr_init:
 	rt61pci_bbp_write(rt2x00dev, 102, 0x16);
 	rt61pci_bbp_write(rt2x00dev, 107, 0x04);
 
-	DEBUG(rt2x00dev, "Start initialization from EEPROM...\n");
 	for (i = 0; i < EEPROM_BBP_SIZE; i++) {
 		rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
 
 		if (eeprom != 0xffff && eeprom != 0x0000) {
 			reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
 			value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
-			DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n",
-			      reg_id, value);
 			rt61pci_bbp_write(rt2x00dev, reg_id, value);
 		}
 	}
-	DEBUG(rt2x00dev, "...End initialization from EEPROM.\n");
 
 	return 0;
 }
@@ -1375,7 +1404,7 @@ static int rt61pci_enable_radio(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Initialize all registers.
 	 */
-	if (rt61pci_init_rings(rt2x00dev) ||
+	if (rt61pci_init_queues(rt2x00dev) ||
 	    rt61pci_init_registers(rt2x00dev) ||
 	    rt61pci_init_bbp(rt2x00dev)) {
 		ERROR(rt2x00dev, "Register initialization failed.\n");
@@ -1394,11 +1423,6 @@ static int rt61pci_enable_radio(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_field32(&reg, RX_CNTL_CSR_ENABLE_RX_DMA, 1);
 	rt2x00pci_register_write(rt2x00dev, RX_CNTL_CSR, reg);
 
-	/*
-	 * Enable LED
-	 */
-	rt61pci_enable_led(rt2x00dev);
-
 	return 0;
 }
 
@@ -1406,11 +1430,6 @@ static void rt61pci_disable_radio(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
 
-	/*
-	 * Disable LED
-	 */
-	rt61pci_disable_led(rt2x00dev);
-
 	rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x00001818);
 
 	/*
@@ -1426,7 +1445,6 @@ static void rt61pci_disable_radio(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC1, 1);
 	rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC2, 1);
 	rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC3, 1);
-	rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_MGMT, 1);
 	rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
 
 	/*
@@ -1508,10 +1526,10 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev,
  */
 static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 				    struct sk_buff *skb,
-				    struct txdata_entry_desc *desc,
+				    struct txentry_desc *txdesc,
 				    struct ieee80211_tx_control *control)
 {
-	struct skb_desc *skbdesc = get_skb_desc(skb);
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
 	__le32 *txd = skbdesc->desc;
 	u32 word;
 
@@ -1519,50 +1537,52 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	 * Start writing the descriptor words.
 	 */
 	rt2x00_desc_read(txd, 1, &word);
-	rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, desc->queue);
-	rt2x00_set_field32(&word, TXD_W1_AIFSN, desc->aifs);
-	rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min);
-	rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max);
+	rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, txdesc->queue);
+	rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs);
+	rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
+	rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
 	rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
 	rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1);
 	rt2x00_desc_write(txd, 1, word);
 
 	rt2x00_desc_read(txd, 2, &word);
-	rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal);
-	rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service);
-	rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low);
-	rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high);
+	rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->signal);
+	rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->service);
+	rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, txdesc->length_low);
+	rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high);
 	rt2x00_desc_write(txd, 2, word);
 
 	rt2x00_desc_read(txd, 5, &word);
 	rt2x00_set_field32(&word, TXD_W5_TX_POWER,
-			   TXPOWER_TO_DEV(control->power_level));
+			   TXPOWER_TO_DEV(rt2x00dev->tx_power));
 	rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1);
 	rt2x00_desc_write(txd, 5, word);
 
-	rt2x00_desc_read(txd, 11, &word);
-	rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, skbdesc->data_len);
-	rt2x00_desc_write(txd, 11, word);
+	if (skbdesc->desc_len > TXINFO_SIZE) {
+		rt2x00_desc_read(txd, 11, &word);
+		rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, skbdesc->data_len);
+		rt2x00_desc_write(txd, 11, word);
+	}
 
 	rt2x00_desc_read(txd, 0, &word);
 	rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1);
 	rt2x00_set_field32(&word, TXD_W0_VALID, 1);
 	rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
-			   test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags));
+			   test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
 	rt2x00_set_field32(&word, TXD_W0_ACK,
-			   test_bit(ENTRY_TXD_ACK, &desc->flags));
+			   test_bit(ENTRY_TXD_ACK, &txdesc->flags));
 	rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
-			   test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags));
+			   test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
 	rt2x00_set_field32(&word, TXD_W0_OFDM,
-			   test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags));
-	rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs);
+			   test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags));
+	rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
 	rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
 			   !!(control->flags &
 			      IEEE80211_TXCTL_LONG_RETRY_LIMIT));
 	rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0);
 	rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skbdesc->data_len);
 	rt2x00_set_field32(&word, TXD_W0_BURST,
-			   test_bit(ENTRY_TXD_BURST, &desc->flags));
+			   test_bit(ENTRY_TXD_BURST, &txdesc->flags));
 	rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
 	rt2x00_desc_write(txd, 0, word);
 }
@@ -1571,11 +1591,11 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
  * TX data initialization
  */
 static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
-				  unsigned int queue)
+				  const unsigned int queue)
 {
 	u32 reg;
 
-	if (queue == IEEE80211_TX_QUEUE_BEACON) {
+	if (queue == RT2X00_BCN_QUEUE_BEACON) {
 		/*
 		 * For Wi-Fi faily generated beacons between participating
 		 * stations. Set TBTT phase adaptive adjustment step to 8us.
@@ -1584,6 +1604,8 @@ static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
 
 		rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
 		if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) {
+			rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
+			rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
 			rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 1);
 			rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
 		}
@@ -1599,8 +1621,6 @@ static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
 			   (queue == IEEE80211_TX_QUEUE_DATA2));
 	rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC3,
 			   (queue == IEEE80211_TX_QUEUE_DATA3));
-	rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_MGMT,
-			   (queue == IEEE80211_TX_QUEUE_DATA4));
 	rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
 }
 
@@ -1628,7 +1648,7 @@ static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
 		return 0;
 	}
 
-	if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) {
+	if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
 		if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
 			offset += 14;
 
@@ -1648,28 +1668,35 @@ static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
 	return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
 }
 
-static void rt61pci_fill_rxdone(struct data_entry *entry,
-			        struct rxdata_entry_desc *desc)
+static void rt61pci_fill_rxdone(struct queue_entry *entry,
+			        struct rxdone_entry_desc *rxdesc)
 {
-	__le32 *rxd = entry->priv;
+	struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data;
 	u32 word0;
 	u32 word1;
 
-	rt2x00_desc_read(rxd, 0, &word0);
-	rt2x00_desc_read(rxd, 1, &word1);
+	rt2x00_desc_read(priv_rx->desc, 0, &word0);
+	rt2x00_desc_read(priv_rx->desc, 1, &word1);
 
-	desc->flags = 0;
+	rxdesc->flags = 0;
 	if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
-		desc->flags |= RX_FLAG_FAILED_FCS_CRC;
+		rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
 
 	/*
 	 * Obtain the status about this packet.
-	 */
-	desc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
-	desc->rssi = rt61pci_agc_to_rssi(entry->ring->rt2x00dev, word1);
-	desc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
-	desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
-	desc->my_bss = !!rt2x00_get_field32(word0, RXD_W0_MY_BSS);
+	 * When frame was received with an OFDM bitrate,
+	 * the signal is the PLCP value. If it was received with
+	 * a CCK bitrate the signal is the rate in 100kbit/s.
+	 */
+	rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
+	rxdesc->rssi = rt61pci_agc_to_rssi(entry->queue->rt2x00dev, word1);
+	rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
+
+	rxdesc->dev_flags = 0;
+	if (rt2x00_get_field32(word0, RXD_W0_OFDM))
+		rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
+	if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
+		rxdesc->dev_flags |= RXDONE_MY_BSS;
 }
 
 /*
@@ -1677,17 +1704,16 @@ static void rt61pci_fill_rxdone(struct data_entry *entry,
  */
 static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
 {
-	struct data_ring *ring;
-	struct data_entry *entry;
-	struct data_entry *entry_done;
-	__le32 *txd;
+	struct data_queue *queue;
+	struct queue_entry *entry;
+	struct queue_entry *entry_done;
+	struct queue_entry_priv_pci_tx *priv_tx;
+	struct txdone_entry_desc txdesc;
 	u32 word;
 	u32 reg;
 	u32 old_reg;
 	int type;
 	int index;
-	int tx_status;
-	int retry;
 
 	/*
 	 * During each loop we will compare the freshly read
@@ -1710,11 +1736,11 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
 
 		/*
 		 * Skip this entry when it contains an invalid
-		 * ring identication number.
+		 * queue identication number.
 		 */
 		type = rt2x00_get_field32(reg, STA_CSR4_PID_TYPE);
-		ring = rt2x00lib_get_ring(rt2x00dev, type);
-		if (unlikely(!ring))
+		queue = rt2x00queue_get_queue(rt2x00dev, type);
+		if (unlikely(!queue))
 			continue;
 
 		/*
@@ -1722,36 +1748,40 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
 		 * index number.
 		 */
 		index = rt2x00_get_field32(reg, STA_CSR4_PID_SUBTYPE);
-		if (unlikely(index >= ring->stats.limit))
+		if (unlikely(index >= queue->limit))
 			continue;
 
-		entry = &ring->entry[index];
-		txd = entry->priv;
-		rt2x00_desc_read(txd, 0, &word);
+		entry = &queue->entries[index];
+		priv_tx = entry->priv_data;
+		rt2x00_desc_read(priv_tx->desc, 0, &word);
 
 		if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
 		    !rt2x00_get_field32(word, TXD_W0_VALID))
 			return;
 
-		entry_done = rt2x00_get_data_entry_done(ring);
+		entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
 		while (entry != entry_done) {
-			/* Catch up. Just report any entries we missed as
-			 * failed. */
+			/* Catch up.
+			 * Just report any entries we missed as failed.
+			 */
 			WARNING(rt2x00dev,
-				"TX status report missed for entry %p\n",
-				entry_done);
-			rt2x00pci_txdone(rt2x00dev, entry_done, TX_FAIL_OTHER,
-					 0);
-			entry_done = rt2x00_get_data_entry_done(ring);
+				"TX status report missed for entry %d\n",
+				entry_done->entry_idx);
+
+			txdesc.status = TX_FAIL_OTHER;
+			txdesc.retry = 0;
+
+			rt2x00pci_txdone(rt2x00dev, entry_done, &txdesc);
+			entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
 		}
 
 		/*
 		 * Obtain the status about this packet.
 		 */
-		tx_status = rt2x00_get_field32(reg, STA_CSR4_TX_RESULT);
-		retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT);
+		txdesc.status = rt2x00_get_field32(reg, STA_CSR4_TX_RESULT);
+		txdesc.retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT);
 
-		rt2x00pci_txdone(rt2x00dev, entry, tx_status, retry);
+		rt2x00pci_txdone(rt2x00dev, entry, &txdesc);
 	}
 }
 
@@ -1906,7 +1936,7 @@ static int rt61pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 		rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
 		rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
 		rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
-		EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word);
+		EEPROM(rt2x00dev, "RSSI OFFSET A: 0x%04x\n", word);
 	} else {
 		value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1);
 		if (value < -10 || value > 10)
@@ -2035,35 +2065,61 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	 * If the eeprom value is invalid,
 	 * switch to default led mode.
 	 */
+#ifdef CONFIG_RT61PCI_LEDS
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom);
+	value = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE);
+
+	rt2x00dev->led_radio.rt2x00dev = rt2x00dev;
+	rt2x00dev->led_radio.type = LED_TYPE_RADIO;
+	rt2x00dev->led_radio.led_dev.brightness_set =
+	    rt61pci_brightness_set;
+	rt2x00dev->led_radio.led_dev.blink_set =
+	    rt61pci_blink_set;
+	rt2x00dev->led_radio.flags = LED_INITIALIZED;
+
+	rt2x00dev->led_assoc.rt2x00dev = rt2x00dev;
+	rt2x00dev->led_assoc.type = LED_TYPE_ASSOC;
+	rt2x00dev->led_assoc.led_dev.brightness_set =
+	    rt61pci_brightness_set;
+	rt2x00dev->led_assoc.led_dev.blink_set =
+	    rt61pci_blink_set;
+	rt2x00dev->led_assoc.flags = LED_INITIALIZED;
+
+	if (value == LED_MODE_SIGNAL_STRENGTH) {
+		rt2x00dev->led_qual.rt2x00dev = rt2x00dev;
+		rt2x00dev->led_radio.type = LED_TYPE_QUALITY;
+		rt2x00dev->led_qual.led_dev.brightness_set =
+		    rt61pci_brightness_set;
+		rt2x00dev->led_qual.led_dev.blink_set =
+		    rt61pci_blink_set;
+		rt2x00dev->led_qual.flags = LED_INITIALIZED;
+	}
 
-	rt2x00dev->led_mode = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE);
-
-	rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LED_MODE,
-			   rt2x00dev->led_mode);
-	rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_0,
+	rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_LED_MODE, value);
+	rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_0,
 			   rt2x00_get_field16(eeprom,
 					      EEPROM_LED_POLARITY_GPIO_0));
-	rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_1,
+	rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_1,
 			   rt2x00_get_field16(eeprom,
 					      EEPROM_LED_POLARITY_GPIO_1));
-	rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_2,
+	rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_2,
 			   rt2x00_get_field16(eeprom,
 					      EEPROM_LED_POLARITY_GPIO_2));
-	rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_3,
+	rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_3,
 			   rt2x00_get_field16(eeprom,
 					      EEPROM_LED_POLARITY_GPIO_3));
-	rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_4,
+	rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_4,
 			   rt2x00_get_field16(eeprom,
 					      EEPROM_LED_POLARITY_GPIO_4));
-	rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_ACT,
+	rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_ACT,
 			   rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT));
-	rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_BG,
+	rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_BG,
 			   rt2x00_get_field16(eeprom,
 					      EEPROM_LED_POLARITY_RDY_G));
-	rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_A,
+	rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A,
 			   rt2x00_get_field16(eeprom,
 					      EEPROM_LED_POLARITY_RDY_A));
+#endif /* CONFIG_RT61PCI_LEDS */
 
 	return 0;
 }
@@ -2197,7 +2253,7 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	rt2x00dev->hw->extra_tx_headroom = 0;
 	rt2x00dev->hw->max_signal = MAX_SIGNAL;
 	rt2x00dev->hw->max_rssi = MAX_RX_SSI;
-	rt2x00dev->hw->queues = 5;
+	rt2x00dev->hw->queues = 4;
 
 	SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
 	SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
@@ -2214,8 +2270,8 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Initialize hw_mode information.
 	 */
-	spec->num_modes = 2;
-	spec->num_rates = 12;
+	spec->supported_bands = SUPPORT_BAND_2GHZ;
+	spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
 	spec->tx_power_a = NULL;
 	spec->tx_power_bg = txpower;
 	spec->tx_power_default = DEFAULT_TXPOWER;
@@ -2230,7 +2286,7 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 
 	if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
 	    rt2x00_rf(&rt2x00dev->chip, RF5325)) {
-		spec->num_modes = 3;
+		spec->supported_bands |= SUPPORT_BAND_5GHZ;
 		spec->num_channels = ARRAY_SIZE(rf_vals_seq);
 
 		txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
@@ -2262,7 +2318,7 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 	rt61pci_probe_hw_mode(rt2x00dev);
 
 	/*
-	 * This device requires firmware
+	 * This device requires firmware.
 	 */
 	__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
 
@@ -2277,70 +2333,6 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 /*
  * IEEE80211 stack callback functions.
  */
-static void rt61pci_configure_filter(struct ieee80211_hw *hw,
-				     unsigned int changed_flags,
-				     unsigned int *total_flags,
-				     int mc_count,
-				     struct dev_addr_list *mc_list)
-{
-	struct rt2x00_dev *rt2x00dev = hw->priv;
-	u32 reg;
-
-	/*
-	 * Mask off any flags we are going to ignore from
-	 * the total_flags field.
-	 */
-	*total_flags &=
-	    FIF_ALLMULTI |
-	    FIF_FCSFAIL |
-	    FIF_PLCPFAIL |
-	    FIF_CONTROL |
-	    FIF_OTHER_BSS |
-	    FIF_PROMISC_IN_BSS;
-
-	/*
-	 * Apply some rules to the filters:
-	 * - Some filters imply different filters to be set.
-	 * - Some things we can't filter out at all.
-	 * - Multicast filter seems to kill broadcast traffic so never use it.
-	 */
-	*total_flags |= FIF_ALLMULTI;
-	if (*total_flags & FIF_OTHER_BSS ||
-	    *total_flags & FIF_PROMISC_IN_BSS)
-		*total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS;
-
-	/*
-	 * Check if there is any work left for us.
-	 */
-	if (rt2x00dev->packet_filter == *total_flags)
-		return;
-	rt2x00dev->packet_filter = *total_flags;
-
-	/*
-	 * Start configuration steps.
-	 * Note that the version error will always be dropped
-	 * and broadcast frames will always be accepted since
-	 * there is no filter for it at this time.
-	 */
-	rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
-	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CRC,
-			   !(*total_flags & FIF_FCSFAIL));
-	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_PHYSICAL,
-			   !(*total_flags & FIF_PLCPFAIL));
-	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CONTROL,
-			   !(*total_flags & FIF_CONTROL));
-	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_NOT_TO_ME,
-			   !(*total_flags & FIF_PROMISC_IN_BSS));
-	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_TO_DS,
-			   !(*total_flags & FIF_PROMISC_IN_BSS));
-	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_VERSION_ERROR, 1);
-	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_MULTICAST,
-			   !(*total_flags & FIF_ALLMULTI));
-	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_BORADCAST, 0);
-	rt2x00_set_field32(&reg, TXRX_CSR0_DROP_ACK_CTS, 1);
-	rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
-}
-
 static int rt61pci_set_retry_limit(struct ieee80211_hw *hw,
 				   u32 short_retry, u32 long_retry)
 {
@@ -2369,66 +2361,72 @@ static u64 rt61pci_get_tsf(struct ieee80211_hw *hw)
 	return tsf;
 }
 
-static void rt61pci_reset_tsf(struct ieee80211_hw *hw)
-{
-	struct rt2x00_dev *rt2x00dev = hw->priv;
-
-	rt2x00pci_register_write(rt2x00dev, TXRX_CSR12, 0);
-	rt2x00pci_register_write(rt2x00dev, TXRX_CSR13, 0);
-}
-
 static int rt61pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
 			  struct ieee80211_tx_control *control)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
-	struct skb_desc *desc;
-	struct data_ring *ring;
-	struct data_entry *entry;
+	struct rt2x00_intf *intf = vif_to_intf(control->vif);
+	struct skb_frame_desc *skbdesc;
+	unsigned int beacon_base;
+	u32 reg;
 
-	/*
-	 * Just in case the ieee80211 doesn't set this,
-	 * but we need this queue set for the descriptor
-	 * initialization.
-	 */
-	control->queue = IEEE80211_TX_QUEUE_BEACON;
-	ring = rt2x00lib_get_ring(rt2x00dev, control->queue);
-	entry = rt2x00_get_data_entry(ring);
+	if (unlikely(!intf->beacon))
+		return -ENOBUFS;
 
 	/*
 	 * We need to append the descriptor in front of the
 	 * beacon frame.
 	 */
-	if (skb_headroom(skb) < TXD_DESC_SIZE) {
-		if (pskb_expand_head(skb, TXD_DESC_SIZE, 0, GFP_ATOMIC))
+	if (skb_headroom(skb) < intf->beacon->queue->desc_size) {
+		if (pskb_expand_head(skb, intf->beacon->queue->desc_size,
+				     0, GFP_ATOMIC))
 			return -ENOMEM;
 	}
 
 	/*
 	 * Add the descriptor in front of the skb.
 	 */
-	skb_push(skb, ring->desc_size);
-	memset(skb->data, 0, ring->desc_size);
+	skb_push(skb, intf->beacon->queue->desc_size);
+	memset(skb->data, 0, intf->beacon->queue->desc_size);
 
 	/*
 	 * Fill in skb descriptor
 	 */
-	desc = get_skb_desc(skb);
-	desc->desc_len = ring->desc_size;
-	desc->data_len = skb->len - ring->desc_size;
-	desc->desc = skb->data;
-	desc->data = skb->data + ring->desc_size;
-	desc->ring = ring;
-	desc->entry = entry;
+	skbdesc = get_skb_frame_desc(skb);
+	memset(skbdesc, 0, sizeof(*skbdesc));
+	skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED;
+	skbdesc->data = skb->data + intf->beacon->queue->desc_size;
+	skbdesc->data_len = skb->len - intf->beacon->queue->desc_size;
+	skbdesc->desc = skb->data;
+	skbdesc->desc_len = intf->beacon->queue->desc_size;
+	skbdesc->entry = intf->beacon;
+
+	/*
+	 * Disable beaconing while we are reloading the beacon data,
+	 * otherwise we might be sending out invalid data.
+	 */
+	rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
+	rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 0);
+	rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 0);
+	rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
+	rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
 
+	/*
+	 * mac80211 doesn't provide the control->queue variable
+	 * for beacons. Set our own queue identification so
+	 * it can be used during descriptor initialization.
+	 */
+	control->queue = RT2X00_BCN_QUEUE_BEACON;
 	rt2x00lib_write_tx_desc(rt2x00dev, skb, control);
 
 	/*
 	 * Write entire beacon with descriptor to register,
 	 * and kick the beacon generator.
 	 */
-	rt2x00pci_register_multiwrite(rt2x00dev, HW_BEACON_BASE0,
+	beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
+	rt2x00pci_register_multiwrite(rt2x00dev, beacon_base,
 				      skb->data, skb->len);
-	rt61pci_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
+	rt61pci_kick_tx_queue(rt2x00dev, control->queue);
 
 	return 0;
 }
@@ -2441,14 +2439,13 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = {
 	.remove_interface	= rt2x00mac_remove_interface,
 	.config			= rt2x00mac_config,
 	.config_interface	= rt2x00mac_config_interface,
-	.configure_filter	= rt61pci_configure_filter,
+	.configure_filter	= rt2x00mac_configure_filter,
 	.get_stats		= rt2x00mac_get_stats,
 	.set_retry_limit	= rt61pci_set_retry_limit,
 	.bss_info_changed	= rt2x00mac_bss_info_changed,
 	.conf_tx		= rt2x00mac_conf_tx,
 	.get_tx_stats		= rt2x00mac_get_tx_stats,
 	.get_tsf		= rt61pci_get_tsf,
-	.reset_tsf		= rt61pci_reset_tsf,
 	.beacon_update		= rt61pci_beacon_update,
 };
 
@@ -2456,6 +2453,7 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
 	.irq_handler		= rt61pci_interrupt,
 	.probe_hw		= rt61pci_probe_hw,
 	.get_firmware_name	= rt61pci_get_firmware_name,
+	.get_firmware_crc	= rt61pci_get_firmware_crc,
 	.load_firmware		= rt61pci_load_firmware,
 	.initialize		= rt2x00pci_initialize,
 	.uninitialize		= rt2x00pci_uninitialize,
@@ -2470,19 +2468,42 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
 	.write_tx_data		= rt2x00pci_write_tx_data,
 	.kick_tx_queue		= rt61pci_kick_tx_queue,
 	.fill_rxdone		= rt61pci_fill_rxdone,
-	.config_mac_addr	= rt61pci_config_mac_addr,
-	.config_bssid		= rt61pci_config_bssid,
-	.config_type		= rt61pci_config_type,
-	.config_preamble	= rt61pci_config_preamble,
+	.config_filter		= rt61pci_config_filter,
+	.config_intf		= rt61pci_config_intf,
+	.config_erp		= rt61pci_config_erp,
 	.config			= rt61pci_config,
 };
 
+static const struct data_queue_desc rt61pci_queue_rx = {
+	.entry_num		= RX_ENTRIES,
+	.data_size		= DATA_FRAME_SIZE,
+	.desc_size		= RXD_DESC_SIZE,
+	.priv_size		= sizeof(struct queue_entry_priv_pci_rx),
+};
+
+static const struct data_queue_desc rt61pci_queue_tx = {
+	.entry_num		= TX_ENTRIES,
+	.data_size		= DATA_FRAME_SIZE,
+	.desc_size		= TXD_DESC_SIZE,
+	.priv_size		= sizeof(struct queue_entry_priv_pci_tx),
+};
+
+static const struct data_queue_desc rt61pci_queue_bcn = {
+	.entry_num		= 4 * BEACON_ENTRIES,
+	.data_size		= MGMT_FRAME_SIZE,
+	.desc_size		= TXINFO_SIZE,
+	.priv_size		= sizeof(struct queue_entry_priv_pci_tx),
+};
+
 static const struct rt2x00_ops rt61pci_ops = {
 	.name		= KBUILD_MODNAME,
-	.rxd_size	= RXD_DESC_SIZE,
-	.txd_size	= TXD_DESC_SIZE,
+	.max_sta_intf	= 1,
+	.max_ap_intf	= 4,
 	.eeprom_size	= EEPROM_SIZE,
 	.rf_size	= RF_SIZE,
+	.rx		= &rt61pci_queue_rx,
+	.tx		= &rt61pci_queue_tx,
+	.bcn		= &rt61pci_queue_bcn,
 	.lib		= &rt61pci_rt2x00_ops,
 	.hw		= &rt61pci_mac80211_ops,
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS