rt2x00: Merge rt2800{pci/usb} radio enabling/disabling code to rt2800lib

The functions rt2800pci_enable_radio and rt2800usb_disable_radio are
almost equal and can be merged into rt2800lib. This reduces the number
of functions which must be exported from rt2800lib to the drivers at
the same time.

Also rt2800pci_disable_radio and rt2800usb_disable_radio are almost
equal and can be merged into rt2800lib in a similar fashion.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 3 insertions, 69 deletions

diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 02f95892aa0..82ae58e0c5d 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -101,19 +101,6 @@ static int rt2800usb_write_firmware(struct rt2x00_dev *rt2x00dev,
 	msleep(10);
 	rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
 
-	/*
-	 * Send signal to firmware during boot time.
-	 */
-	rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0);
-
-	if (rt2x00_rt(rt2x00dev, RT3070) ||
-	    rt2x00_rt(rt2x00dev, RT3071) ||
-	    rt2x00_rt(rt2x00dev, RT3572)) {
-		udelay(200);
-		rt2800_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0);
-		udelay(10);
-	}
-
 	return 0;
 }
 
@@ -173,30 +160,10 @@ static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev)
 static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
-	u16 word;
 
-	/*
-	 * Initialize all registers.
-	 */
-	if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) ||
-		     rt2800_init_registers(rt2x00dev) ||
-		     rt2800_init_bbp(rt2x00dev) ||
-		     rt2800_init_rfcsr(rt2x00dev)))
+	if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev)))
 		return -EIO;
 
-	rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
-	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
-	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
-
-	udelay(50);
-
-	rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1);
-	rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
-
-
 	rt2800_register_read(rt2x00dev, USB_DMA_CFG, &reg);
 	rt2x00_set_field32(&reg, USB_DMA_CFG_PHY_CLEAR, 0);
 	rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_EN, 0);
@@ -211,45 +178,12 @@ static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_field32(&reg, USB_DMA_CFG_TX_BULK_EN, 1);
 	rt2800_register_write(rt2x00dev, USB_DMA_CFG, reg);
 
-	rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
-	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
-	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 1);
-	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
-
-	/*
-	 * Initialize LED control
-	 */
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word);
-	rt2800_mcu_request(rt2x00dev, MCU_LED_1, 0xff,
-			      word & 0xff, (word >> 8) & 0xff);
-
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word);
-	rt2800_mcu_request(rt2x00dev, MCU_LED_2, 0xff,
-			      word & 0xff, (word >> 8) & 0xff);
-
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word);
-	rt2800_mcu_request(rt2x00dev, MCU_LED_3, 0xff,
-			      word & 0xff, (word >> 8) & 0xff);
-
-	return 0;
+	return rt2800_enable_radio(rt2x00dev);
 }
 
 static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev)
 {
-	u32 reg;
-
-	rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
-	rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
-
-	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
-	rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0);
-	rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0);
-
-	/* Wait for DMA, ignore error */
-	rt2800_wait_wpdma_ready(rt2x00dev);
-
+	rt2800_disable_radio(rt2x00dev);
 	rt2x00usb_disable_radio(rt2x00dev);
 }