aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rt2x00/rt2500usb.c
diff options
context:
space:
mode:
authorIvo van Doorn <IvDoorn@gmail.com>2011-04-18 15:27:06 +0200
committerJohn W. Linville <linville@tuxdriver.com>2011-04-19 15:39:11 -0400
commit7dab73b37f5e8885cb73efd25e73861f9b4f0246 (patch)
tree3c09412e1ec0b02eaf193879aed12db0f9874f7c /drivers/net/wireless/rt2x00/rt2500usb.c
parent62fe778412b36791b7897cfa139342906fbbf07b (diff)
rt2x00: Split rt2x00dev->flags
The number of flags defined for the rt2x00dev->flags field, has been growing over the years. Currently we are approaching the maximum number of bits which are available in the field. A secondary problem, is that one part of the field are initialized only during boot, because the driver requirements are initialized or device requirements are loaded from the EEPROM. In both cases, the flags are fixed and will not change during device operation. The other flags are the device state, and will change frequently. So far this resulted in the fact that for some flags, the atomic bit accessors are used, while for the others the non-atomic variants are used. By splitting the flags up into a "flags" and "cap_flags" we can put all flags which are fixed inside "cap_flags". This field can then be read non-atomically. In the "flags" field we keep the device state, which is going to be read atomically. This adds more room for more flags in the future, and sanitizes the field access methods. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2500usb.c')
-rw-r--r--drivers/net/wireless/rt2x00/rt2500usb.c12
1 files changed, 6 insertions, 6 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index eac788160f5..dbbd8bc851f 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1519,7 +1519,7 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
* Detect if this device has an hardware controlled radio.
*/
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
- __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags);
/*
* Read the RSSI <-> dBm offset information.
@@ -1790,13 +1790,13 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* This device requires the atim queue
*/
- __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
- __set_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags);
+ __set_bit(REQUIRE_ATIM_QUEUE, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_BEACON_GUARD, &rt2x00dev->cap_flags);
if (!modparam_nohwcrypt) {
- __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
- __set_bit(DRIVER_REQUIRE_COPY_IV, &rt2x00dev->flags);
+ __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_COPY_IV, &rt2x00dev->cap_flags);
}
- __set_bit(DRIVER_REQUIRE_SW_SEQNO, &rt2x00dev->flags);
+ __set_bit(REQUIRE_SW_SEQNO, &rt2x00dev->cap_flags);
/*
* Set the rssi offset.