orinoco: Move sources to a subdirectory

Keeping all the orinoco drivers in a common directory will make
maintenance easier.

Signed-off by: David Kilroy <kilroyd@googlemail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>

16 files changed, 10885 insertions, 0 deletions

diff --git a/drivers/net/wireless/orinoco/Makefile b/drivers/net/wireless/orinoco/Makefile
new file mode 100644
index 00000000000..791366e08c5
--- /dev/null
+++ b/drivers/net/wireless/orinoco/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for the orinoco wireless device drivers.
+#
+
+obj-$(CONFIG_HERMES)		+= orinoco.o hermes.o hermes_dld.o
+obj-$(CONFIG_PCMCIA_HERMES)	+= orinoco_cs.o
+obj-$(CONFIG_APPLE_AIRPORT)	+= airport.o
+obj-$(CONFIG_PLX_HERMES)	+= orinoco_plx.o
+obj-$(CONFIG_PCI_HERMES)	+= orinoco_pci.o
+obj-$(CONFIG_TMD_HERMES)	+= orinoco_tmd.o
+obj-$(CONFIG_NORTEL_HERMES)	+= orinoco_nortel.o
+obj-$(CONFIG_PCMCIA_SPECTRUM)	+= spectrum_cs.o
diff --git a/drivers/net/wireless/orinoco/airport.c b/drivers/net/wireless/orinoco/airport.c
new file mode 100644
index 00000000000..ce03a2e865f
--- /dev/null
+++ b/drivers/net/wireless/orinoco/airport.c
@@ -0,0 +1,286 @@
+/* airport.c
+ *
+ * A driver for "Hermes" chipset based Apple Airport wireless
+ * card.
+ *
+ * Copyright notice & release notes in file orinoco.c
+ * 
+ * Note specific to airport stub:
+ * 
+ *  0.05 : first version of the new split driver
+ *  0.06 : fix possible hang on powerup, add sleep support
+ */
+
+#define DRIVER_NAME "airport"
+#define PFX DRIVER_NAME ": "
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <asm/pmac_feature.h>
+
+#include "orinoco.h"
+
+#define AIRPORT_IO_LEN	(0x1000)	/* one page */
+
+struct airport {
+	struct macio_dev *mdev;
+	void __iomem *vaddr;
+	int irq_requested;
+	int ndev_registered;
+};
+
+static int
+airport_suspend(struct macio_dev *mdev, pm_message_t state)
+{
+	struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev);
+	struct orinoco_private *priv = netdev_priv(dev);
+	unsigned long flags;
+	int err;
+
+	printk(KERN_DEBUG "%s: Airport entering sleep mode\n", dev->name);
+
+	err = orinoco_lock(priv, &flags);
+	if (err) {
+		printk(KERN_ERR "%s: hw_unavailable on PBOOK_SLEEP_NOW\n",
+		       dev->name);
+		return 0;
+	}
+
+	err = __orinoco_down(dev);
+	if (err)
+		printk(KERN_WARNING "%s: PBOOK_SLEEP_NOW: Error %d downing interface\n",
+		       dev->name, err);
+
+	netif_device_detach(dev);
+
+	priv->hw_unavailable++;
+
+	orinoco_unlock(priv, &flags);
+
+	disable_irq(dev->irq);
+	pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 0);
+
+	return 0;
+}
+
+static int
+airport_resume(struct macio_dev *mdev)
+{
+	struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev);
+	struct orinoco_private *priv = netdev_priv(dev);
+	unsigned long flags;
+	int err;
+
+	printk(KERN_DEBUG "%s: Airport waking up\n", dev->name);
+
+	pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 1);
+	msleep(200);
+
+	enable_irq(dev->irq);
+
+	err = orinoco_reinit_firmware(dev);
+	if (err) {
+		printk(KERN_ERR "%s: Error %d re-initializing firmware on PBOOK_WAKE\n",
+		       dev->name, err);
+		return 0;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	netif_device_attach(dev);
+
+	priv->hw_unavailable--;
+
+	if (priv->open && (! priv->hw_unavailable)) {
+		err = __orinoco_up(dev);
+		if (err)
+			printk(KERN_ERR "%s: Error %d restarting card on PBOOK_WAKE\n",
+			       dev->name, err);
+	}
+
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static int
+airport_detach(struct macio_dev *mdev)
+{
+	struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev);
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct airport *card = priv->card;
+
+	if (card->ndev_registered)
+		unregister_netdev(dev);
+	card->ndev_registered = 0;
+
+	if (card->irq_requested)
+		free_irq(dev->irq, dev);
+	card->irq_requested = 0;
+
+	if (card->vaddr)
+		iounmap(card->vaddr);
+	card->vaddr = NULL;
+
+	macio_release_resource(mdev, 0);
+
+	pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 0);
+	ssleep(1);
+
+	macio_set_drvdata(mdev, NULL);
+	free_orinocodev(dev);
+
+	return 0;
+}
+
+static int airport_hard_reset(struct orinoco_private *priv)
+{
+	/* It would be nice to power cycle the Airport for a real hard
+	 * reset, but for some reason although it appears to
+	 * re-initialize properly, it falls in a screaming heap
+	 * shortly afterwards. */
+#if 0
+	struct net_device *dev = priv->ndev;
+	struct airport *card = priv->card;
+
+	/* Vitally important.  If we don't do this it seems we get an
+	 * interrupt somewhere during the power cycle, since
+	 * hw_unavailable is already set it doesn't get ACKed, we get
+	 * into an interrupt loop and the PMU decides to turn us
+	 * off. */
+	disable_irq(dev->irq);
+
+	pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(card->mdev), 0, 0);
+	ssleep(1);
+	pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(card->mdev), 0, 1);
+	ssleep(1);
+
+	enable_irq(dev->irq);
+	ssleep(1);
+#endif
+
+	return 0;
+}
+
+static int
+airport_attach(struct macio_dev *mdev, const struct of_device_id *match)
+{
+	struct orinoco_private *priv;
+	struct net_device *dev;
+	struct airport *card;
+	unsigned long phys_addr;
+	hermes_t *hw;
+
+	if (macio_resource_count(mdev) < 1 || macio_irq_count(mdev) < 1) {
+		printk(KERN_ERR PFX "Wrong interrupt/addresses in OF tree\n");
+		return -ENODEV;
+	}
+
+	/* Allocate space for private device-specific data */
+	dev = alloc_orinocodev(sizeof(*card), &mdev->ofdev.dev,
+			       airport_hard_reset, NULL);
+	if (! dev) {
+		printk(KERN_ERR PFX "Cannot allocate network device\n");
+		return -ENODEV;
+	}
+	priv = netdev_priv(dev);
+	card = priv->card;
+
+	hw = &priv->hw;
+	card->mdev = mdev;
+
+	if (macio_request_resource(mdev, 0, "airport")) {
+		printk(KERN_ERR PFX "can't request IO resource !\n");
+		free_orinocodev(dev);
+		return -EBUSY;
+	}
+
+	SET_NETDEV_DEV(dev, &mdev->ofdev.dev);
+
+	macio_set_drvdata(mdev, dev);
+
+	/* Setup interrupts & base address */
+	dev->irq = macio_irq(mdev, 0);
+	phys_addr = macio_resource_start(mdev, 0);  /* Physical address */
+	printk(KERN_DEBUG PFX "Physical address %lx\n", phys_addr);
+	dev->base_addr = phys_addr;
+	card->vaddr = ioremap(phys_addr, AIRPORT_IO_LEN);
+	if (!card->vaddr) {
+		printk(KERN_ERR PFX "ioremap() failed\n");
+		goto failed;
+	}
+
+	hermes_struct_init(hw, card->vaddr, HERMES_16BIT_REGSPACING);
+		
+	/* Power up card */
+	pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 1);
+	ssleep(1);
+
+	/* Reset it before we get the interrupt */
+	hermes_init(hw);
+
+	if (request_irq(dev->irq, orinoco_interrupt, 0, dev->name, dev)) {
+		printk(KERN_ERR PFX "Couldn't get IRQ %d\n", dev->irq);
+		goto failed;
+	}
+	card->irq_requested = 1;
+
+	/* Tell the stack we exist */
+	if (register_netdev(dev) != 0) {
+		printk(KERN_ERR PFX "register_netdev() failed\n");
+		goto failed;
+	}
+	printk(KERN_DEBUG PFX "Card registered for interface %s\n", dev->name);
+	card->ndev_registered = 1;
+	return 0;
+ failed:
+	airport_detach(mdev);
+	return -ENODEV;
+}				/* airport_attach */
+
+
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+	" (Benjamin Herrenschmidt <benh@kernel.crashing.org>)";
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("Driver for the Apple Airport wireless card.");
+MODULE_LICENSE("Dual MPL/GPL");
+
+static struct of_device_id airport_match[] = 
+{
+	{
+	.name 		= "radio",
+	},
+	{},
+};
+
+MODULE_DEVICE_TABLE (of, airport_match);
+
+static struct macio_driver airport_driver = 
+{
+	.name 		= DRIVER_NAME,
+	.match_table	= airport_match,
+	.probe		= airport_attach,
+	.remove		= airport_detach,
+	.suspend	= airport_suspend,
+	.resume		= airport_resume,
+};
+
+static int __init
+init_airport(void)
+{
+	printk(KERN_DEBUG "%s\n", version);
+
+	return macio_register_driver(&airport_driver);
+}
+
+static void __exit
+exit_airport(void)
+{
+	return macio_unregister_driver(&airport_driver);
+}
+
+module_init(init_airport);
+module_exit(exit_airport);
diff --git a/drivers/net/wireless/orinoco/hermes.c b/drivers/net/wireless/orinoco/hermes.c
new file mode 100644
index 00000000000..bfa375369df
--- /dev/null
+++ b/drivers/net/wireless/orinoco/hermes.c
@@ -0,0 +1,544 @@
+/* hermes.c
+ *
+ * Driver core for the "Hermes" wireless MAC controller, as used in
+ * the Lucent Orinoco and Cabletron RoamAbout cards. It should also
+ * work on the hfa3841 and hfa3842 MAC controller chips used in the
+ * Prism II chipsets.
+ *
+ * This is not a complete driver, just low-level access routines for
+ * the MAC controller itself.
+ *
+ * Based on the prism2 driver from Absolute Value Systems' linux-wlan
+ * project, the Linux wvlan_cs driver, Lucent's HCF-Light
+ * (wvlan_hcf.c) library, and the NetBSD wireless driver (in no
+ * particular order).
+ *
+ * Copyright (C) 2000, David Gibson, Linuxcare Australia.
+ * (C) Copyright David Gibson, IBM Corp. 2001-2003.
+ * 
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above.  If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL.  If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include "hermes.h"
+
+MODULE_DESCRIPTION("Low-level driver helper for Lucent Hermes chipset and Prism II HFA384x wireless MAC controller");
+MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>"
+	" & David Gibson <hermes@gibson.dropbear.id.au>");
+MODULE_LICENSE("Dual MPL/GPL");
+
+/* These are maximum timeouts. Most often, card wil react much faster */
+#define CMD_BUSY_TIMEOUT (100) /* In iterations of ~1us */
+#define CMD_INIT_TIMEOUT (50000) /* in iterations of ~10us */
+#define CMD_COMPL_TIMEOUT (20000) /* in iterations of ~10us */
+#define ALLOC_COMPL_TIMEOUT (1000) /* in iterations of ~10us */
+
+/*
+ * Debugging helpers
+ */
+
+#define DMSG(stuff...) do {printk(KERN_DEBUG "hermes @ %p: " , hw->iobase); \
+			printk(stuff);} while (0)
+
+#undef HERMES_DEBUG
+#ifdef HERMES_DEBUG
+#include <stdarg.h>
+
+#define DEBUG(lvl, stuff...) if ( (lvl) <= HERMES_DEBUG) DMSG(stuff)
+
+#else /* ! HERMES_DEBUG */
+
+#define DEBUG(lvl, stuff...) do { } while (0)
+
+#endif /* ! HERMES_DEBUG */
+
+
+/*
+ * Internal functions
+ */
+
+/* Issue a command to the chip. Waiting for it to complete is the caller's
+   problem.
+
+   Returns -EBUSY if the command register is busy, 0 on success.
+
+   Callable from any context.
+*/
+static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0,
+			    u16 param1, u16 param2)
+{
+	int k = CMD_BUSY_TIMEOUT;
+	u16 reg;
+
+	/* First wait for the command register to unbusy */
+	reg = hermes_read_regn(hw, CMD);
+	while ( (reg & HERMES_CMD_BUSY) && k ) {
+		k--;
+		udelay(1);
+		reg = hermes_read_regn(hw, CMD);
+	}
+	if (reg & HERMES_CMD_BUSY) {
+		return -EBUSY;
+	}
+
+	hermes_write_regn(hw, PARAM2, param2);
+	hermes_write_regn(hw, PARAM1, param1);
+	hermes_write_regn(hw, PARAM0, param0);
+	hermes_write_regn(hw, CMD, cmd);
+	
+	return 0;
+}
+
+/*
+ * Function definitions
+ */
+
+/* For doing cmds that wipe the magic constant in SWSUPPORT0 */
+int hermes_doicmd_wait(hermes_t *hw, u16 cmd,
+		       u16 parm0, u16 parm1, u16 parm2,
+		       struct hermes_response *resp)
+{
+	int err = 0;
+	int k;
+	u16 status, reg;
+
+	err = hermes_issue_cmd(hw, cmd, parm0, parm1, parm2);
+	if (err)
+		return err;
+
+	reg = hermes_read_regn(hw, EVSTAT);
+	k = CMD_INIT_TIMEOUT;
+	while ((!(reg & HERMES_EV_CMD)) && k) {
+		k--;
+		udelay(10);
+		reg = hermes_read_regn(hw, EVSTAT);
+	}
+
+	hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC);
+
+	if (!hermes_present(hw)) {
+		DEBUG(0, "hermes @ 0x%x: Card removed during reset.\n",
+		       hw->iobase);
+		err = -ENODEV;
+		goto out;
+	}
+
+	if (!(reg & HERMES_EV_CMD)) {
+		printk(KERN_ERR "hermes @ %p: "
+		       "Timeout waiting for card to reset (reg=0x%04x)!\n",
+		       hw->iobase, reg);
+		err = -ETIMEDOUT;
+		goto out;
+	}
+
+	status = hermes_read_regn(hw, STATUS);
+	if (resp) {
+		resp->status = status;
+		resp->resp0 = hermes_read_regn(hw, RESP0);
+		resp->resp1 = hermes_read_regn(hw, RESP1);
+		resp->resp2 = hermes_read_regn(hw, RESP2);
+	}
+
+	hermes_write_regn(hw, EVACK, HERMES_EV_CMD);
+
+	if (status & HERMES_STATUS_RESULT)
+		err = -EIO;
+out:
+	return err;
+}
+EXPORT_SYMBOL(hermes_doicmd_wait);
+
+void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing)
+{
+	hw->iobase = address;
+	hw->reg_spacing = reg_spacing;
+	hw->inten = 0x0;
+}
+EXPORT_SYMBOL(hermes_struct_init);
+
+int hermes_init(hermes_t *hw)
+{
+	u16 reg;
+	int err = 0;
+	int k;
+
+	/* We don't want to be interrupted while resetting the chipset */
+	hw->inten = 0x0;
+	hermes_write_regn(hw, INTEN, 0);
+	hermes_write_regn(hw, EVACK, 0xffff);
+
+	/* Normally it's a "can't happen" for the command register to
+           be busy when we go to issue a command because we are
+           serializing all commands.  However we want to have some
+           chance of resetting the card even if it gets into a stupid
+           state, so we actually wait to see if the command register
+           will unbusy itself here. */
+	k = CMD_BUSY_TIMEOUT;
+	reg = hermes_read_regn(hw, CMD);
+	while (k && (reg & HERMES_CMD_BUSY)) {
+		if (reg == 0xffff) /* Special case - the card has probably been removed,
+				      so don't wait for the timeout */
+			return -ENODEV;
+
+		k--;
+		udelay(1);
+		reg = hermes_read_regn(hw, CMD);
+	}
+	
+	/* No need to explicitly handle the timeout - if we've timed
+	   out hermes_issue_cmd() will probably return -EBUSY below */
+
+	/* According to the documentation, EVSTAT may contain
+	   obsolete event occurrence information.  We have to acknowledge
+	   it by writing EVACK. */
+	reg = hermes_read_regn(hw, EVSTAT);
+	hermes_write_regn(hw, EVACK, reg);
+
+	/* We don't use hermes_docmd_wait here, because the reset wipes
+	   the magic constant in SWSUPPORT0 away, and it gets confused */
+	err = hermes_doicmd_wait(hw, HERMES_CMD_INIT, 0, 0, 0, NULL);
+
+	return err;
+}
+EXPORT_SYMBOL(hermes_init);
+
+/* Issue a command to the chip, and (busy!) wait for it to
+ * complete.
+ *
+ * Returns: < 0 on internal error, 0 on success, > 0 on error returned by the firmware
+ *
+ * Callable from any context, but locking is your problem. */
+int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
+		      struct hermes_response *resp)
+{
+	int err;
+	int k;
+	u16 reg;
+	u16 status;
+
+	err = hermes_issue_cmd(hw, cmd, parm0, 0, 0);
+	if (err) {
+		if (! hermes_present(hw)) {
+			if (net_ratelimit())
+				printk(KERN_WARNING "hermes @ %p: "
+				       "Card removed while issuing command "
+				       "0x%04x.\n", hw->iobase, cmd);
+			err = -ENODEV;
+		} else 
+			if (net_ratelimit())
+				printk(KERN_ERR "hermes @ %p: "
+				       "Error %d issuing command 0x%04x.\n",
+				       hw->iobase, err, cmd);
+		goto out;
+	}
+
+	reg = hermes_read_regn(hw, EVSTAT);
+	k = CMD_COMPL_TIMEOUT;
+	while ( (! (reg & HERMES_EV_CMD)) && k) {
+		k--;
+		udelay(10);
+		reg = hermes_read_regn(hw, EVSTAT);
+	}
+
+	if (! hermes_present(hw)) {
+		printk(KERN_WARNING "hermes @ %p: Card removed "
+		       "while waiting for command 0x%04x completion.\n",
+		       hw->iobase, cmd);
+		err = -ENODEV;
+		goto out;
+	}
+		
+	if (! (reg & HERMES_EV_CMD)) {
+		printk(KERN_ERR "hermes @ %p: Timeout waiting for "
+		       "command 0x%04x completion.\n", hw->iobase, cmd);
+		err = -ETIMEDOUT;
+		goto out;
+	}
+
+	status = hermes_read_regn(hw, STATUS);
+	if (resp) {
+		resp->status = status;
+		resp->resp0 = hermes_read_regn(hw, RESP0);
+		resp->resp1 = hermes_read_regn(hw, RESP1);
+		resp->resp2 = hermes_read_regn(hw, RESP2);
+	}
+
+	hermes_write_regn(hw, EVACK, HERMES_EV_CMD);
+
+	if (status & HERMES_STATUS_RESULT)
+		err = -EIO;
+
+ out:
+	return err;
+}
+EXPORT_SYMBOL(hermes_docmd_wait);
+
+int hermes_allocate(hermes_t *hw, u16 size, u16 *fid)
+{
+	int err = 0;
+	int k;
+	u16 reg;
+	
+	if ( (size < HERMES_ALLOC_LEN_MIN) || (size > HERMES_ALLOC_LEN_MAX) )
+		return -EINVAL;
+
+	err = hermes_docmd_wait(hw, HERMES_CMD_ALLOC, size, NULL);
+	if (err) {
+		return err;
+	}
+
+	reg = hermes_read_regn(hw, EVSTAT);
+	k = ALLOC_COMPL_TIMEOUT;
+	while ( (! (reg & HERMES_EV_ALLOC)) && k) {
+		k--;
+		udelay(10);
+		reg = hermes_read_regn(hw, EVSTAT);
+	}
+	
+	if (! hermes_present(hw)) {
+		printk(KERN_WARNING "hermes @ %p: "
+		       "Card removed waiting for frame allocation.\n",
+		       hw->iobase);
+		return -ENODEV;
+	}
+		
+	if (! (reg & HERMES_EV_ALLOC)) {
+		printk(KERN_ERR "hermes @ %p: "
+		       "Timeout waiting for frame allocation\n",
+		       hw->iobase);
+		return -ETIMEDOUT;
+	}
+
+	*fid = hermes_read_regn(hw, ALLOCFID);
+	hermes_write_regn(hw, EVACK, HERMES_EV_ALLOC);
+	
+	return 0;
+}
+EXPORT_SYMBOL(hermes_allocate);
+
+/* Set up a BAP to read a particular chunk of data from card's internal buffer.
+ *
+ * Returns: < 0 on internal failure (errno), 0 on success, >0 on error
+ * from firmware
+ *
+ * Callable from any context */
+static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset)
+{
+	int sreg = bap ? HERMES_SELECT1 : HERMES_SELECT0;
+	int oreg = bap ? HERMES_OFFSET1 : HERMES_OFFSET0;
+	int k;
+	u16 reg;
+
+	/* Paranoia.. */
+	if ( (offset > HERMES_BAP_OFFSET_MAX) || (offset % 2) )
+		return -EINVAL;
+
+	k = HERMES_BAP_BUSY_TIMEOUT;
+	reg = hermes_read_reg(hw, oreg);
+	while ((reg & HERMES_OFFSET_BUSY) && k) {
+		k--;
+		udelay(1);
+		reg = hermes_read_reg(hw, oreg);
+	}
+
+	if (reg & HERMES_OFFSET_BUSY)
+		return -ETIMEDOUT;
+
+	/* Now we actually set up the transfer */
+	hermes_write_reg(hw, sreg, id);
+	hermes_write_reg(hw, oreg, offset);
+
+	/* Wait for the BAP to be ready */
+	k = HERMES_BAP_BUSY_TIMEOUT;
+	reg = hermes_read_reg(hw, oreg);
+	while ( (reg & (HERMES_OFFSET_BUSY | HERMES_OFFSET_ERR)) && k) {
+		k--;
+		udelay(1);
+		reg = hermes_read_reg(hw, oreg);
+	}
+
+	if (reg != offset) {
+		printk(KERN_ERR "hermes @ %p: BAP%d offset %s: "
+		       "reg=0x%x id=0x%x offset=0x%x\n", hw->iobase, bap,
+		       (reg & HERMES_OFFSET_BUSY) ? "timeout" : "error",
+		       reg, id, offset);
+
+		if (reg & HERMES_OFFSET_BUSY) {
+			return -ETIMEDOUT;
+		}
+
+		return -EIO;		/* error or wrong offset */
+	}
+
+	return 0;
+}
+
+/* Read a block of data from the chip's buffer, via the
+ * BAP. Synchronization/serialization is the caller's problem.  len
+ * must be even.
+ *
+ * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
+ */
+int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
+		     u16 id, u16 offset)
+{
+	int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
+	int err = 0;
+
+	if ( (len < 0) || (len % 2) )
+		return -EINVAL;
+
+	err = hermes_bap_seek(hw, bap, id, offset);
+	if (err)
+		goto out;
+
+	/* Actually do the transfer */
+	hermes_read_words(hw, dreg, buf, len/2);
+
+ out:
+	return err;
+}
+EXPORT_SYMBOL(hermes_bap_pread);
+
+/* Write a block of data to the chip's buffer, via the
+ * BAP. Synchronization/serialization is the caller's problem.
+ *
+ * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
+ */
+int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
+		      u16 id, u16 offset)
+{
+	int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
+	int err = 0;
+
+	if (len < 0)
+		return -EINVAL;
+
+	err = hermes_bap_seek(hw, bap, id, offset);
+	if (err)
+		goto out;
+	
+	/* Actually do the transfer */
+	hermes_write_bytes(hw, dreg, buf, len);
+
+ out:	
+	return err;
+}
+EXPORT_SYMBOL(hermes_bap_pwrite);
+
+/* Read a Length-Type-Value record from the card.
+ *
+ * If length is NULL, we ignore the length read from the card, and
+ * read the entire buffer regardless. This is useful because some of
+ * the configuration records appear to have incorrect lengths in
+ * practice.
+ *
+ * Callable from user or bh context.  */
+int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize,
+		    u16 *length, void *buf)
+{
+	int err = 0;
+	int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
+	u16 rlength, rtype;
+	unsigned nwords;
+
+	if ( (bufsize < 0) || (bufsize % 2) )
+		return -EINVAL;
+
+	err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS, rid, NULL);
+	if (err)
+		return err;
+
+	err = hermes_bap_seek(hw, bap, rid, 0);
+	if (err)
+		return err;
+
+	rlength = hermes_read_reg(hw, dreg);
+
+	if (! rlength)
+		return -ENODATA;
+
+	rtype = hermes_read_reg(hw, dreg);
+
+	if (length)
+		*length = rlength;
+
+	if (rtype != rid)
+		printk(KERN_WARNING "hermes @ %p: %s(): "
+		       "rid (0x%04x) does not match type (0x%04x)\n",
+		       hw->iobase, __func__, rid, rtype);
+	if (HERMES_RECLEN_TO_BYTES(rlength) > bufsize)
+		printk(KERN_WARNING "hermes @ %p: "
+		       "Truncating LTV record from %d to %d bytes. "
+		       "(rid=0x%04x, len=0x%04x)\n", hw->iobase,
+		       HERMES_RECLEN_TO_BYTES(rlength), bufsize, rid, rlength);
+
+	nwords = min((unsigned)rlength - 1, bufsize / 2);
+	hermes_read_words(hw, dreg, buf, nwords);
+
+	return 0;
+}
+EXPORT_SYMBOL(hermes_read_ltv);
+
+int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, 
+		     u16 length, const void *value)
+{
+	int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
+	int err = 0;
+	unsigned count;
+
+	if (length == 0)
+		return -EINVAL;
+
+	err = hermes_bap_seek(hw, bap, rid, 0);
+	if (err)
+		return err;
+
+	hermes_write_reg(hw, dreg, length);
+	hermes_write_reg(hw, dreg, rid);
+
+	count = length - 1;
+
+	hermes_write_bytes(hw, dreg, value, count << 1);
+
+	err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS | HERMES_CMD_WRITE,
+				rid, NULL);
+
+	return err;
+}
+EXPORT_SYMBOL(hermes_write_ltv);
+
+static int __init init_hermes(void)
+{
+	return 0;
+}
+
+static void __exit exit_hermes(void)
+{
+}
+
+module_init(init_hermes);
+module_exit(exit_hermes);
diff --git a/drivers/net/wireless/orinoco/hermes.h b/drivers/net/wireless/orinoco/hermes.h
new file mode 100644
index 00000000000..8b13c8fef3d
--- /dev/null
+++ b/drivers/net/wireless/orinoco/hermes.h
@@ -0,0 +1,494 @@
+/* hermes.h
+ *
+ * Driver core for the "Hermes" wireless MAC controller, as used in
+ * the Lucent Orinoco and Cabletron RoamAbout cards. It should also
+ * work on the hfa3841 and hfa3842 MAC controller chips used in the
+ * Prism I & II chipsets.
+ *
+ * This is not a complete driver, just low-level access routines for
+ * the MAC controller itself.
+ *
+ * Based on the prism2 driver from Absolute Value Systems' linux-wlan
+ * project, the Linux wvlan_cs driver, Lucent's HCF-Light
+ * (wvlan_hcf.c) library, and the NetBSD wireless driver.
+ *
+ * Copyright (C) 2000, David Gibson, Linuxcare Australia.
+ * (C) Copyright David Gibson, IBM Corp. 2001-2003.
+ *
+ * Portions taken from hfa384x.h, Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
+ *
+ * This file distributed under the GPL, version 2.
+ */
+
+#ifndef _HERMES_H
+#define _HERMES_H
+
+/* Notes on locking:
+ *
+ * As a module of low level hardware access routines, there is no
+ * locking. Users of this module should ensure that they serialize
+ * access to the hermes_t structure, and to the hardware
+*/
+
+#include <linux/if_ether.h>
+#include <asm/io.h>
+
+/*
+ * Limits and constants
+ */
+#define		HERMES_ALLOC_LEN_MIN		(4)
+#define		HERMES_ALLOC_LEN_MAX		(2400)
+#define		HERMES_LTV_LEN_MAX		(34)
+#define		HERMES_BAP_DATALEN_MAX		(4096)
+#define		HERMES_BAP_OFFSET_MAX		(4096)
+#define		HERMES_PORTID_MAX		(7)
+#define		HERMES_NUMPORTS_MAX		(HERMES_PORTID_MAX+1)
+#define		HERMES_PDR_LEN_MAX		(260)	/* in bytes, from EK */
+#define		HERMES_PDA_RECS_MAX		(200)	/* a guess */
+#define		HERMES_PDA_LEN_MAX		(1024)	/* in bytes, from EK */
+#define		HERMES_SCANRESULT_MAX		(35)
+#define		HERMES_CHINFORESULT_MAX		(8)
+#define		HERMES_MAX_MULTICAST		(16)
+#define		HERMES_MAGIC			(0x7d1f)
+
+/*
+ * Hermes register offsets
+ */
+#define		HERMES_CMD			(0x00)
+#define		HERMES_PARAM0			(0x02)
+#define		HERMES_PARAM1			(0x04)
+#define		HERMES_PARAM2			(0x06)
+#define		HERMES_STATUS			(0x08)
+#define		HERMES_RESP0			(0x0A)
+#define		HERMES_RESP1			(0x0C)
+#define		HERMES_RESP2			(0x0E)
+#define		HERMES_INFOFID			(0x10)
+#define		HERMES_RXFID			(0x20)
+#define		HERMES_ALLOCFID			(0x22)
+#define		HERMES_TXCOMPLFID		(0x24)
+#define		HERMES_SELECT0			(0x18)
+#define		HERMES_OFFSET0			(0x1C)
+#define		HERMES_DATA0			(0x36)
+#define		HERMES_SELECT1			(0x1A)
+#define		HERMES_OFFSET1			(0x1E)
+#define		HERMES_DATA1			(0x38)
+#define		HERMES_EVSTAT			(0x30)
+#define		HERMES_INTEN			(0x32)
+#define		HERMES_EVACK			(0x34)
+#define		HERMES_CONTROL			(0x14)
+#define		HERMES_SWSUPPORT0		(0x28)
+#define		HERMES_SWSUPPORT1		(0x2A)
+#define		HERMES_SWSUPPORT2		(0x2C)
+#define		HERMES_AUXPAGE			(0x3A)
+#define		HERMES_AUXOFFSET		(0x3C)
+#define		HERMES_AUXDATA			(0x3E)
+
+/*
+ * CMD register bitmasks
+ */
+#define		HERMES_CMD_BUSY			(0x8000)
+#define		HERMES_CMD_AINFO		(0x7f00)
+#define		HERMES_CMD_MACPORT		(0x0700)
+#define		HERMES_CMD_RECL			(0x0100)
+#define		HERMES_CMD_WRITE		(0x0100)
+#define		HERMES_CMD_PROGMODE		(0x0300)
+#define		HERMES_CMD_CMDCODE		(0x003f)
+
+/*
+ * STATUS register bitmasks
+ */
+#define		HERMES_STATUS_RESULT		(0x7f00)
+#define		HERMES_STATUS_CMDCODE		(0x003f)
+
+/*
+ * OFFSET register bitmasks
+ */
+#define		HERMES_OFFSET_BUSY		(0x8000)
+#define		HERMES_OFFSET_ERR		(0x4000)
+#define		HERMES_OFFSET_DATAOFF		(0x0ffe)
+
+/*
+ * Event register bitmasks (INTEN, EVSTAT, EVACK)
+ */
+#define		HERMES_EV_TICK			(0x8000)
+#define		HERMES_EV_WTERR			(0x4000)
+#define		HERMES_EV_INFDROP		(0x2000)
+#define		HERMES_EV_INFO			(0x0080)
+#define		HERMES_EV_DTIM			(0x0020)
+#define		HERMES_EV_CMD			(0x0010)
+#define		HERMES_EV_ALLOC			(0x0008)
+#define		HERMES_EV_TXEXC			(0x0004)
+#define		HERMES_EV_TX			(0x0002)
+#define		HERMES_EV_RX			(0x0001)
+
+/*
+ * Command codes
+ */
+/*--- Controller Commands ----------------------------*/
+#define		HERMES_CMD_INIT			(0x0000)
+#define		HERMES_CMD_ENABLE		(0x0001)
+#define		HERMES_CMD_DISABLE		(0x0002)
+#define		HERMES_CMD_DIAG			(0x0003)
+
+/*--- Buffer Mgmt Commands ---------------------------*/
+#define		HERMES_CMD_ALLOC		(0x000A)
+#define		HERMES_CMD_TX			(0x000B)
+
+/*--- Regulate Commands ------------------------------*/
+#define		HERMES_CMD_NOTIFY		(0x0010)
+#define		HERMES_CMD_INQUIRE		(0x0011)
+
+/*--- Configure Commands -----------------------------*/
+#define		HERMES_CMD_ACCESS		(0x0021)
+#define		HERMES_CMD_DOWNLD		(0x0022)
+
+/*--- Serial I/O Commands ----------------------------*/
+#define		HERMES_CMD_READMIF		(0x0030)
+#define		HERMES_CMD_WRITEMIF		(0x0031)
+
+/*--- Debugging Commands -----------------------------*/
+#define 	HERMES_CMD_TEST			(0x0038)
+
+
+/* Test command arguments */
+#define		HERMES_TEST_SET_CHANNEL		0x0800
+#define		HERMES_TEST_MONITOR		0x0b00
+#define		HERMES_TEST_STOP		0x0f00
+
+/* Authentication algorithms */
+#define		HERMES_AUTH_OPEN		1
+#define		HERMES_AUTH_SHARED_KEY		2
+
+/* WEP settings */
+#define		HERMES_WEP_PRIVACY_INVOKED	0x0001
+#define		HERMES_WEP_EXCL_UNENCRYPTED	0x0002
+#define		HERMES_WEP_HOST_ENCRYPT		0x0010
+#define		HERMES_WEP_HOST_DECRYPT		0x0080
+
+/* Symbol hostscan options */
+#define		HERMES_HOSTSCAN_SYMBOL_5SEC	0x0001
+#define		HERMES_HOSTSCAN_SYMBOL_ONCE	0x0002
+#define		HERMES_HOSTSCAN_SYMBOL_PASSIVE	0x0040
+#define		HERMES_HOSTSCAN_SYMBOL_BCAST	0x0080
+
+/*
+ * Frame structures and constants
+ */
+
+#define HERMES_DESCRIPTOR_OFFSET	0
+#define HERMES_802_11_OFFSET		(14)
+#define HERMES_802_3_OFFSET		(14+32)
+#define HERMES_802_2_OFFSET		(14+32+14)
+#define HERMES_TXCNTL2_OFFSET		(HERMES_802_3_OFFSET - 2)
+
+#define HERMES_RXSTAT_ERR		(0x0003)
+#define	HERMES_RXSTAT_BADCRC		(0x0001)
+#define	HERMES_RXSTAT_UNDECRYPTABLE	(0x0002)
+#define	HERMES_RXSTAT_MIC		(0x0010)	/* Frame contains MIC */
+#define	HERMES_RXSTAT_MACPORT		(0x0700)
+#define HERMES_RXSTAT_PCF		(0x1000)	/* Frame was received in CF period */
+#define	HERMES_RXSTAT_MIC_KEY_ID	(0x1800)	/* MIC key used */
+#define	HERMES_RXSTAT_MSGTYPE		(0xE000)
+#define	HERMES_RXSTAT_1042		(0x2000)	/* RFC-1042 frame */
+#define	HERMES_RXSTAT_TUNNEL		(0x4000)	/* bridge-tunnel encoded frame */
+#define	HERMES_RXSTAT_WMP		(0x6000)	/* Wavelan-II Management Protocol frame */
+
+/* Shift amount for key ID in RXSTAT and TXCTRL */
+#define	HERMES_MIC_KEY_ID_SHIFT		11
+
+struct hermes_tx_descriptor {
+	__le16 status;
+	__le16 reserved1;
+	__le16 reserved2;
+	__le32 sw_support;
+	u8 retry_count;
+	u8 tx_rate;
+	__le16 tx_control;	
+} __attribute__ ((packed));
+
+#define HERMES_TXSTAT_RETRYERR		(0x0001)
+#define HERMES_TXSTAT_AGEDERR		(0x0002)
+#define HERMES_TXSTAT_DISCON		(0x0004)
+#define HERMES_TXSTAT_FORMERR		(0x0008)
+
+#define HERMES_TXCTRL_TX_OK		(0x0002)	/* ?? interrupt on Tx complete */
+#define HERMES_TXCTRL_TX_EX		(0x0004)	/* ?? interrupt on Tx exception */
+#define HERMES_TXCTRL_802_11		(0x0008)	/* We supply 802.11 header */
+#define HERMES_TXCTRL_MIC		(0x0010)	/* 802.3 + TKIP */
+#define HERMES_TXCTRL_MIC_KEY_ID	(0x1800)	/* MIC Key ID mask */
+#define HERMES_TXCTRL_ALT_RTRY		(0x0020)
+
+/* Inquiry constants and data types */
+
+#define HERMES_INQ_TALLIES		(0xF100)
+#define HERMES_INQ_SCAN			(0xF101)
+#define HERMES_INQ_CHANNELINFO		(0xF102)
+#define HERMES_INQ_HOSTSCAN		(0xF103)
+#define HERMES_INQ_HOSTSCAN_SYMBOL	(0xF104)
+#define HERMES_INQ_LINKSTATUS		(0xF200)
+#define HERMES_INQ_SEC_STAT_AGERE	(0xF202)
+
+struct hermes_tallies_frame {
+	__le16 TxUnicastFrames;
+	__le16 TxMulticastFrames;
+	__le16 TxFragments;
+	__le16 TxUnicastOctets;
+	__le16 TxMulticastOctets;
+	__le16 TxDeferredTransmissions;
+	__le16 TxSingleRetryFrames;
+	__le16 TxMultipleRetryFrames;
+	__le16 TxRetryLimitExceeded;
+	__le16 TxDiscards;
+	__le16 RxUnicastFrames;
+	__le16 RxMulticastFrames;
+	__le16 RxFragments;
+	__le16 RxUnicastOctets;
+	__le16 RxMulticastOctets;
+	__le16 RxFCSErrors;
+	__le16 RxDiscards_NoBuffer;
+	__le16 TxDiscardsWrongSA;
+	__le16 RxWEPUndecryptable;
+	__le16 RxMsgInMsgFragments;
+	__le16 RxMsgInBadMsgFragments;
+	/* Those last are probably not available in very old firmwares */
+	__le16 RxDiscards_WEPICVError;
+	__le16 RxDiscards_WEPExcluded;
+} __attribute__ ((packed));
+
+/* Grabbed from wlan-ng - Thanks Mark... - Jean II
+ * This is the result of a scan inquiry command */
+/* Structure describing info about an Access Point */
+struct prism2_scan_apinfo {
+	__le16 channel;		/* Channel where the AP sits */
+	__le16 noise;		/* Noise level */
+	__le16 level;		/* Signal level */
+	u8 bssid[ETH_ALEN];	/* MAC address of the Access Point */
+	__le16 beacon_interv;	/* Beacon interval */
+	__le16 capabilities;	/* Capabilities */
+	__le16 essid_len;	/* ESSID length */
+	u8 essid[32];		/* ESSID of the network */
+	u8 rates[10];		/* Bit rate supported */
+	__le16 proberesp_rate;	/* Data rate of the response frame */
+	__le16 atim;		/* ATIM window time, Kus (hostscan only) */
+} __attribute__ ((packed));
+
+/* Same stuff for the Lucent/Agere card.
+ * Thanks to h1kari <h1kari AT dachb0den.com> - Jean II */
+struct agere_scan_apinfo {
+	__le16 channel;		/* Channel where the AP sits */
+	__le16 noise;		/* Noise level */
+	__le16 level;		/* Signal level */
+	u8 bssid[ETH_ALEN];	/* MAC address of the Access Point */
+	__le16 beacon_interv;	/* Beacon interval */
+	__le16 capabilities;	/* Capabilities */
+	/* bits: 0-ess, 1-ibss, 4-privacy [wep] */
+	__le16 essid_len;	/* ESSID length */
+	u8 essid[32];		/* ESSID of the network */
+} __attribute__ ((packed));
+
+/* Moustafa: Scan structure for Symbol cards */
+struct symbol_scan_apinfo {
+	u8 channel;		/* Channel where the AP sits */
+	u8 unknown1;		/* 8 in 2.9x and 3.9x f/w, 0 otherwise */
+	__le16 noise;		/* Noise level */
+	__le16 level;		/* Signal level */
+	u8 bssid[ETH_ALEN];	/* MAC address of the Access Point */
+	__le16 beacon_interv;	/* Beacon interval */
+	__le16 capabilities;	/* Capabilities */
+	/* bits: 0-ess, 1-ibss, 4-privacy [wep] */
+	__le16 essid_len;	/* ESSID length */
+	u8 essid[32];		/* ESSID of the network */
+    	__le16 rates[5];	/* Bit rate supported */
+	__le16 basic_rates;	/* Basic rates bitmask */
+	u8 unknown2[6];		/* Always FF:FF:FF:FF:00:00 */
+	u8 unknown3[8];		/* Always 0, appeared in f/w 3.91-68 */
+} __attribute__ ((packed));
+
+union hermes_scan_info {
+	struct agere_scan_apinfo	a;
+	struct prism2_scan_apinfo	p;
+	struct symbol_scan_apinfo	s;
+};
+
+/* Extended scan struct for HERMES_INQ_CHANNELINFO.
+ * wl_lkm calls this an ACS scan (Automatic Channel Select).
+ * Keep out of union hermes_scan_info because it is much bigger than
+ * the older scan structures. */
+struct agere_ext_scan_info {
+	__le16	reserved0;
+
+	u8	noise;
+	u8	level;
+	u8	rx_flow;
+	u8	rate;
+	__le16	reserved1[2];
+
+	__le16	frame_control;
+	__le16	dur_id;
+	u8	addr1[ETH_ALEN];
+	u8	addr2[ETH_ALEN];
+	u8	bssid[ETH_ALEN];
+	__le16	sequence;
+	u8	addr4[ETH_ALEN];
+
+	__le16	data_length;
+
+	/* Next 3 fields do not get filled in. */
+	u8	daddr[ETH_ALEN];
+	u8	saddr[ETH_ALEN];
+	__le16	len_type;
+
+	__le64	timestamp;
+	__le16	beacon_interval;
+	__le16	capabilities;
+	u8	data[316];
+} __attribute__ ((packed));
+
+#define HERMES_LINKSTATUS_NOT_CONNECTED   (0x0000)  
+#define HERMES_LINKSTATUS_CONNECTED       (0x0001)
+#define HERMES_LINKSTATUS_DISCONNECTED    (0x0002)
+#define HERMES_LINKSTATUS_AP_CHANGE       (0x0003)
+#define HERMES_LINKSTATUS_AP_OUT_OF_RANGE (0x0004)
+#define HERMES_LINKSTATUS_AP_IN_RANGE     (0x0005)
+#define HERMES_LINKSTATUS_ASSOC_FAILED    (0x0006)
+  
+struct hermes_linkstatus {
+	__le16 linkstatus;         /* Link status */
+} __attribute__ ((packed));
+
+struct hermes_response {
+	u16 status, resp0, resp1, resp2;
+};
+
+/* "ID" structure - used for ESSID and station nickname */
+struct hermes_idstring {
+	__le16 len;
+	__le16 val[16];
+} __attribute__ ((packed));
+
+struct hermes_multicast {
+	u8 addr[HERMES_MAX_MULTICAST][ETH_ALEN];
+} __attribute__ ((packed));
+
+/* Timeouts */
+#define HERMES_BAP_BUSY_TIMEOUT (10000) /* In iterations of ~1us */
+
+/* Basic control structure */
+typedef struct hermes {
+	void __iomem *iobase;
+	int reg_spacing;
+#define HERMES_16BIT_REGSPACING	0
+#define HERMES_32BIT_REGSPACING	1
+	u16 inten; /* Which interrupts should be enabled? */
+} hermes_t;
+
+/* Register access convenience macros */
+#define hermes_read_reg(hw, off) \
+	(ioread16((hw)->iobase + ( (off) << (hw)->reg_spacing )))
+#define hermes_write_reg(hw, off, val) \
+	(iowrite16((val), (hw)->iobase + ((off) << (hw)->reg_spacing)))
+#define hermes_read_regn(hw, name) hermes_read_reg((hw), HERMES_##name)
+#define hermes_write_regn(hw, name, val) hermes_write_reg((hw), HERMES_##name, (val))
+
+/* Function prototypes */
+void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing);
+int hermes_init(hermes_t *hw);
+int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
+		      struct hermes_response *resp);
+int hermes_doicmd_wait(hermes_t *hw, u16 cmd,
+		       u16 parm0, u16 parm1, u16 parm2,
+		       struct hermes_response *resp);
+int hermes_allocate(hermes_t *hw, u16 size, u16 *fid);
+
+int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
+		       u16 id, u16 offset);
+int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
+			u16 id, u16 offset);
+int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen,
+		    u16 *length, void *buf);
+int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
+		      u16 length, const void *value);
+
+/* Inline functions */
+
+static inline int hermes_present(hermes_t *hw)
+{
+	return hermes_read_regn(hw, SWSUPPORT0) == HERMES_MAGIC;
+}
+
+static inline void hermes_set_irqmask(hermes_t *hw, u16 events)
+{
+	hw->inten = events;
+	hermes_write_regn(hw, INTEN, events);
+}
+
+static inline int hermes_enable_port(hermes_t *hw, int port)
+{
+	return hermes_docmd_wait(hw, HERMES_CMD_ENABLE | (port << 8),
+				 0, NULL);
+}
+
+static inline int hermes_disable_port(hermes_t *hw, int port)
+{
+	return hermes_docmd_wait(hw, HERMES_CMD_DISABLE | (port << 8), 
+				 0, NULL);
+}
+
+/* Initiate an INQUIRE command (tallies or scan).  The result will come as an
+ * information frame in __orinoco_ev_info() */
+static inline int hermes_inquire(hermes_t *hw, u16 rid)
+{
+	return hermes_docmd_wait(hw, HERMES_CMD_INQUIRE, rid, NULL);
+}
+
+#define HERMES_BYTES_TO_RECLEN(n) ( (((n)+1)/2) + 1 )
+#define HERMES_RECLEN_TO_BYTES(n) ( ((n)-1) * 2 )
+
+/* Note that for the next two, the count is in 16-bit words, not bytes */
+static inline void hermes_read_words(struct hermes *hw, int off, void *buf, unsigned count)
+{
+	off = off << hw->reg_spacing;
+	ioread16_rep(hw->iobase + off, buf, count);
+}
+
+static inline void hermes_write_bytes(struct hermes *hw, int off,
+				      const char *buf, unsigned count)
+{
+	off = off << hw->reg_spacing;
+	iowrite16_rep(hw->iobase + off, buf, count >> 1);
+	if (unlikely(count & 1))
+		iowrite8(buf[count - 1], hw->iobase + off);
+}
+
+static inline void hermes_clear_words(struct hermes *hw, int off, unsigned count)
+{
+	unsigned i;
+
+	off = off << hw->reg_spacing;
+
+	for (i = 0; i < count; i++)
+		iowrite16(0, hw->iobase + off);
+}
+
+#define HERMES_READ_RECORD(hw, bap, rid, buf) \
+	(hermes_read_ltv((hw),(bap),(rid), sizeof(*buf), NULL, (buf)))
+#define HERMES_WRITE_RECORD(hw, bap, rid, buf) \
+	(hermes_write_ltv((hw),(bap),(rid),HERMES_BYTES_TO_RECLEN(sizeof(*buf)),(buf)))
+
+static inline int hermes_read_wordrec(hermes_t *hw, int bap, u16 rid, u16 *word)
+{
+	__le16 rec;
+	int err;
+
+	err = HERMES_READ_RECORD(hw, bap, rid, &rec);
+	*word = le16_to_cpu(rec);
+	return err;
+}
+
+static inline int hermes_write_wordrec(hermes_t *hw, int bap, u16 rid, u16 word)
+{
+	__le16 rec = cpu_to_le16(word);
+	return HERMES_WRITE_RECORD(hw, bap, rid, &rec);
+}
+
+#endif  /* _HERMES_H */
diff --git a/drivers/net/wireless/orinoco/hermes_dld.c b/drivers/net/wireless/orinoco/hermes_dld.c
new file mode 100644
index 00000000000..d8c626e61a3
--- /dev/null
+++ b/drivers/net/wireless/orinoco/hermes_dld.c
@@ -0,0 +1,730 @@
+/*
+ * Hermes download helper driver.
+ *
+ * This could be entirely merged into hermes.c.
+ *
+ * I'm keeping it separate to minimise the amount of merging between
+ * kernel upgrades. It also means the memory overhead for drivers that
+ * don't need firmware download low.
+ *
+ * This driver:
+ *  - is capable of writing to the volatile area of the hermes device
+ *  - is currently not capable of writing to non-volatile areas
+ *  - provide helpers to identify and update plugin data
+ *  - is not capable of interpreting a fw image directly. That is up to
+ *    the main card driver.
+ *  - deals with Hermes I devices. It can probably be modified to deal
+ *    with Hermes II devices
+ *
+ * Copyright (C) 2007, David Kilroy
+ *
+ * Plug data code slightly modified from spectrum_cs driver
+ *    Copyright (C) 2002-2005 Pavel Roskin <proski@gnu.org>
+ * Portions based on information in wl_lkm_718 Agere driver
+ *    COPYRIGHT (C) 2001-2004 by Agere Systems Inc. All Rights Reserved
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above.  If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL.  If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include "hermes.h"
+#include "hermes_dld.h"
+
+MODULE_DESCRIPTION("Download helper for Lucent Hermes chipset");
+MODULE_AUTHOR("David Kilroy <kilroyd@gmail.com>");
+MODULE_LICENSE("Dual MPL/GPL");
+
+#define PFX "hermes_dld: "
+
+/*
+ * AUX port access.  To unlock the AUX port write the access keys to the
+ * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL
+ * register.  Then read it and make sure it's HERMES_AUX_ENABLED.
+ */
+#define HERMES_AUX_ENABLE	0x8000	/* Enable auxiliary port access */
+#define HERMES_AUX_DISABLE	0x4000	/* Disable to auxiliary port access */
+#define HERMES_AUX_ENABLED	0xC000	/* Auxiliary port is open */
+#define HERMES_AUX_DISABLED	0x0000	/* Auxiliary port is closed */
+
+#define HERMES_AUX_PW0	0xFE01
+#define HERMES_AUX_PW1	0xDC23
+#define HERMES_AUX_PW2	0xBA45
+
+/* HERMES_CMD_DOWNLD */
+#define HERMES_PROGRAM_DISABLE             (0x0000 | HERMES_CMD_DOWNLD)
+#define HERMES_PROGRAM_ENABLE_VOLATILE     (0x0100 | HERMES_CMD_DOWNLD)
+#define HERMES_PROGRAM_ENABLE_NON_VOLATILE (0x0200 | HERMES_CMD_DOWNLD)
+#define HERMES_PROGRAM_NON_VOLATILE        (0x0300 | HERMES_CMD_DOWNLD)
+
+/* End markers used in dblocks */
+#define PDI_END		0x00000000	/* End of PDA */
+#define BLOCK_END	0xFFFFFFFF	/* Last image block */
+#define TEXT_END	0x1A		/* End of text header */
+
+/*
+ * PDA == Production Data Area
+ *
+ * In principle, the max. size of the PDA is is 4096 words. Currently,
+ * however, only about 500 bytes of this area are used.
+ *
+ * Some USB implementations can't handle sizes in excess of 1016. Note
+ * that PDA is not actually used in those USB environments, but may be
+ * retrieved by common code.
+ */
+#define MAX_PDA_SIZE	1000
+
+/* Limit the amout we try to download in a single shot.
+ * Size is in bytes.
+ */
+#define MAX_DL_SIZE 1024
+#define LIMIT_PROGRAM_SIZE 0
+
+/*
+ * The following structures have little-endian fields denoted by
+ * the leading underscore.  Don't access them directly - use inline
+ * functions defined below.
+ */
+
+/*
+ * The binary image to be downloaded consists of series of data blocks.
+ * Each block has the following structure.
+ */
+struct dblock {
+	__le32 addr;		/* adapter address where to write the block */
+	__le16 len;		/* length of the data only, in bytes */
+	char data[0];		/* data to be written */
+} __attribute__ ((packed));
+
+/*
+ * Plug Data References are located in in the image after the last data
+ * block.  They refer to areas in the adapter memory where the plug data
+ * items with matching ID should be written.
+ */
+struct pdr {
+	__le32 id;		/* record ID */
+	__le32 addr;		/* adapter address where to write the data */
+	__le32 len;		/* expected length of the data, in bytes */
+	char next[0];		/* next PDR starts here */
+} __attribute__ ((packed));
+
+/*
+ * Plug Data Items are located in the EEPROM read from the adapter by
+ * primary firmware.  They refer to the device-specific data that should
+ * be plugged into the secondary firmware.
+ */
+struct pdi {
+	__le16 len;		/* length of ID and data, in words */
+	__le16 id;		/* record ID */
+	char data[0];		/* plug data */
+} __attribute__ ((packed));
+
+/*** FW data block access functions ***/
+
+static inline u32
+dblock_addr(const struct dblock *blk)
+{
+	return le32_to_cpu(blk->addr);
+}
+
+static inline u32
+dblock_len(const struct dblock *blk)
+{
+	return le16_to_cpu(blk->len);
+}
+
+/*** PDR Access functions ***/
+
+static inline u32
+pdr_id(const struct pdr *pdr)
+{
+	return le32_to_cpu(pdr->id);
+}
+
+static inline u32
+pdr_addr(const struct pdr *pdr)
+{
+	return le32_to_cpu(pdr->addr);
+}
+
+static inline u32
+pdr_len(const struct pdr *pdr)
+{
+	return le32_to_cpu(pdr->len);
+}
+
+/*** PDI Access functions ***/
+
+static inline u32
+pdi_id(const struct pdi *pdi)
+{
+	return le16_to_cpu(pdi->id);
+}
+
+/* Return length of the data only, in bytes */
+static inline u32
+pdi_len(const struct pdi *pdi)
+{
+	return 2 * (le16_to_cpu(pdi->len) - 1);
+}
+
+/*** Hermes AUX control ***/
+
+static inline void
+hermes_aux_setaddr(hermes_t *hw, u32 addr)
+{
+	hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7));
+	hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F));
+}
+
+static inline int
+hermes_aux_control(hermes_t *hw, int enabled)
+{
+	int desired_state = enabled ? HERMES_AUX_ENABLED : HERMES_AUX_DISABLED;
+	int action = enabled ? HERMES_AUX_ENABLE : HERMES_AUX_DISABLE;
+	int i;
+
+	/* Already open? */
+	if (hermes_read_reg(hw, HERMES_CONTROL) == desired_state)
+		return 0;
+
+	hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0);
+	hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1);
+	hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2);
+	hermes_write_reg(hw, HERMES_CONTROL, action);
+
+	for (i = 0; i < 20; i++) {
+		udelay(10);
+		if (hermes_read_reg(hw, HERMES_CONTROL) ==
+		    desired_state)
+			return 0;
+	}
+
+	return -EBUSY;
+}
+
+/*** Plug Data Functions ***/
+
+/*
+ * Scan PDR for the record with the specified RECORD_ID.
+ * If it's not found, return NULL.
+ */
+static struct pdr *
+hermes_find_pdr(struct pdr *first_pdr, u32 record_id)
+{
+	struct pdr *pdr = first_pdr;
+	void *end = (void *)first_pdr + MAX_PDA_SIZE;
+
+	while (((void *)pdr < end) &&
+	       (pdr_id(pdr) != PDI_END)) {
+		/*
+		 * PDR area is currently not terminated by PDI_END.
+		 * It's followed by CRC records, which have the type
+		 * field where PDR has length.  The type can be 0 or 1.
+		 */
+		if (pdr_len(pdr) < 2)
+			return NULL;
+
+		/* If the record ID matches, we are done */
+		if (pdr_id(pdr) == record_id)
+			return pdr;
+
+		pdr = (struct pdr *) pdr->next;
+	}
+	return NULL;
+}
+
+/* Scan production data items for a particular entry */
+static struct pdi *
+hermes_find_pdi(struct pdi *first_pdi, u32 record_id)
+{
+	struct pdi *pdi = first_pdi;
+
+	while (pdi_id(pdi) != PDI_END) {
+
+		/* If the record ID matches, we are done */
+		if (pdi_id(pdi) == record_id)
+			return pdi;
+
+		pdi = (struct pdi *) &pdi->data[pdi_len(pdi)];
+	}
+	return NULL;
+}
+
+/* Process one Plug Data Item - find corresponding PDR and plug it */
+static int
+hermes_plug_pdi(hermes_t *hw, struct pdr *first_pdr, const struct pdi *pdi)
+{
+	struct pdr *pdr;
+
+	/* Find the PDR corresponding to this PDI */
+	pdr = hermes_find_pdr(first_pdr, pdi_id(pdi));
+
+	/* No match is found, safe to ignore */
+	if (!pdr)
+		return 0;
+
+	/* Lengths of the data in PDI and PDR must match */
+	if (pdi_len(pdi) != pdr_len(pdr))
+		return -EINVAL;
+
+	/* do the actual plugging */
+	hermes_aux_setaddr(hw, pdr_addr(pdr));
+	hermes_write_bytes(hw, HERMES_AUXDATA, pdi->data, pdi_len(pdi));
+
+	return 0;
+}
+
+/* Read PDA from the adapter */
+int hermes_read_pda(hermes_t *hw,
+		    __le16 *pda,
+		    u32 pda_addr,
+		    u16 pda_len,
+		    int use_eeprom) /* can we get this into hw? */
+{
+	int ret;
+	u16 pda_size;
+	u16 data_len = pda_len;
+	__le16 *data = pda;
+
+	if (use_eeprom) {
+		/* PDA of spectrum symbol is in eeprom */
+
+		/* Issue command to read EEPROM */
+		ret = hermes_docmd_wait(hw, HERMES_CMD_READMIF, 0, NULL);
+		if (ret)
+			return ret;
+	} else {
+		/* wl_lkm does not include PDA size in the PDA area.
+		 * We will pad the information into pda, so other routines
+		 * don't have to be modified */
+		pda[0] = cpu_to_le16(pda_len - 2);
+			/* Includes CFG_PROD_DATA but not itself */
+		pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */
+		data_len = pda_len - 4;
+		data = pda + 2;
+	}
+
+	/* Open auxiliary port */
+	ret = hermes_aux_control(hw, 1);
+	printk(KERN_DEBUG PFX "AUX enable returned %d\n", ret);
+	if (ret)
+		return ret;
+
+	/* read PDA from EEPROM */
+	hermes_aux_setaddr(hw, pda_addr);
+	hermes_read_words(hw, HERMES_AUXDATA, data, data_len / 2);
+
+	/* Close aux port */
+	ret = hermes_aux_control(hw, 0);
+	printk(KERN_DEBUG PFX "AUX disable returned %d\n", ret);
+
+	/* Check PDA length */
+	pda_size = le16_to_cpu(pda[0]);
+	printk(KERN_DEBUG PFX "Actual PDA length %d, Max allowed %d\n",
+	       pda_size, pda_len);
+	if (pda_size > pda_len)
+		return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL(hermes_read_pda);
+
+/* Parse PDA and write the records into the adapter
+ *
+ * Attempt to write every records that is in the specified pda
+ * which also has a valid production data record for the firmware.
+ */
+int hermes_apply_pda(hermes_t *hw,
+		     const char *first_pdr,
+		     const __le16 *pda)
+{
+	int ret;
+	const struct pdi *pdi;
+	struct pdr *pdr;
+
+	pdr = (struct pdr *) first_pdr;
+
+	/* Go through every PDI and plug them into the adapter */
+	pdi = (const struct pdi *) (pda + 2);
+	while (pdi_id(pdi) != PDI_END) {
+		ret = hermes_plug_pdi(hw, pdr, pdi);
+		if (ret)
+			return ret;
+
+		/* Increment to the next PDI */
+		pdi = (const struct pdi *) &pdi->data[pdi_len(pdi)];
+	}
+	return 0;
+}
+EXPORT_SYMBOL(hermes_apply_pda);
+
+/* Identify the total number of bytes in all blocks
+ * including the header data.
+ */
+size_t
+hermes_blocks_length(const char *first_block)
+{
+	const struct dblock *blk = (const struct dblock *) first_block;
+	int total_len = 0;
+	int len;
+
+	/* Skip all blocks to locate Plug Data References
+	 * (Spectrum CS) */
+	while (dblock_addr(blk) != BLOCK_END) {
+		len = dblock_len(blk);
+		total_len += sizeof(*blk) + len;
+		blk = (struct dblock *) &blk->data[len];
+	}
+
+	return total_len;
+}
+EXPORT_SYMBOL(hermes_blocks_length);
+
+/*** Hermes programming ***/
+
+/* About to start programming data (Hermes I)
+ * offset is the entry point
+ *
+ * Spectrum_cs' Symbol fw does not require this
+ * wl_lkm Agere fw does
+ * Don't know about intersil
+ */
+int hermesi_program_init(hermes_t *hw, u32 offset)
+{
+	int err;
+
+	/* Disable interrupts?*/
+	/*hw->inten = 0x0;*/
+	/*hermes_write_regn(hw, INTEN, 0);*/
+	/*hermes_set_irqmask(hw, 0);*/
+
+	/* Acknowledge any outstanding command */
+	hermes_write_regn(hw, EVACK, 0xFFFF);
+
+	/* Using doicmd_wait rather than docmd_wait */
+	err = hermes_doicmd_wait(hw,
+				 0x0100 | HERMES_CMD_INIT,
+				 0, 0, 0, NULL);
+	if (err)
+		return err;
+
+	err = hermes_doicmd_wait(hw,
+				 0x0000 | HERMES_CMD_INIT,
+				 0, 0, 0, NULL);
+	if (err)
+		return err;
+
+	err = hermes_aux_control(hw, 1);
+	printk(KERN_DEBUG PFX "AUX enable returned %d\n", err);
+
+	if (err)
+		return err;
+
+	printk(KERN_DEBUG PFX "Enabling volatile, EP 0x%08x\n", offset);
+	err = hermes_doicmd_wait(hw,
+				 HERMES_PROGRAM_ENABLE_VOLATILE,
+				 offset & 0xFFFFu,
+				 offset >> 16,
+				 0,
+				 NULL);
+	printk(KERN_DEBUG PFX "PROGRAM_ENABLE returned %d\n",
+	       err);
+
+	return err;
+}
+EXPORT_SYMBOL(hermesi_program_init);
+
+/* Done programming data (Hermes I)
+ *
+ * Spectrum_cs' Symbol fw does not require this
+ * wl_lkm Agere fw does
+ * Don't know about intersil
+ */
+int hermesi_program_end(hermes_t *hw)
+{
+	struct hermes_response resp;
+	int rc = 0;
+	int err;
+
+	rc = hermes_docmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp);
+
+	printk(KERN_DEBUG PFX "PROGRAM_DISABLE returned %d, "
+	       "r0 0x%04x, r1 0x%04x, r2 0x%04x\n",
+	       rc, resp.resp0, resp.resp1, resp.resp2);
+
+	if ((rc == 0) &&
+	    ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD))
+		rc = -EIO;
+
+	err = hermes_aux_control(hw, 0);
+	printk(KERN_DEBUG PFX "AUX disable returned %d\n", err);
+
+	/* Acknowledge any outstanding command */
+	hermes_write_regn(hw, EVACK, 0xFFFF);
+
+	/* Reinitialise, ignoring return */
+	(void) hermes_doicmd_wait(hw, 0x0000 | HERMES_CMD_INIT,
+				  0, 0, 0, NULL);
+
+	return rc ? rc : err;
+}
+EXPORT_SYMBOL(hermesi_program_end);
+
+/* Program the data blocks */
+int hermes_program(hermes_t *hw, const char *first_block, const char *end)
+{
+	const struct dblock *blk;
+	u32 blkaddr;
+	u32 blklen;
+#if LIMIT_PROGRAM_SIZE
+	u32 addr;
+	u32 len;
+#endif
+
+	blk = (const struct dblock *) first_block;
+
+	if ((const char *) blk > (end - sizeof(*blk)))
+		return -EIO;
+
+	blkaddr = dblock_addr(blk);
+	blklen = dblock_len(blk);
+
+	while ((blkaddr != BLOCK_END) &&
+	       (((const char *) blk + blklen) <= end)) {
+		printk(KERN_DEBUG PFX
+		       "Programming block of length %d to address 0x%08x\n",
+		       blklen, blkaddr);
+
+#if !LIMIT_PROGRAM_SIZE
+		/* wl_lkm driver splits this into writes of 2000 bytes */
+		hermes_aux_setaddr(hw, blkaddr);
+		hermes_write_bytes(hw, HERMES_AUXDATA, blk->data,
+				   blklen);
+#else
+		len = (blklen < MAX_DL_SIZE) ? blklen : MAX_DL_SIZE;
+		addr = blkaddr;
+
+		while (addr < (blkaddr + blklen)) {
+			printk(KERN_DEBUG PFX
+			       "Programming subblock of length %d "
+			       "to address 0x%08x. Data @ %p\n",
+			       len, addr, &blk->data[addr - blkaddr]);
+
+			hermes_aux_setaddr(hw, addr);
+			hermes_write_bytes(hw, HERMES_AUXDATA,
+					   &blk->data[addr - blkaddr],
+					   len);
+
+			addr += len;
+			len = ((blkaddr + blklen - addr) < MAX_DL_SIZE) ?
+				(blkaddr + blklen - addr) : MAX_DL_SIZE;
+		}
+#endif
+		blk = (const struct dblock *) &blk->data[blklen];
+
+		if ((const char *) blk > (end - sizeof(*blk)))
+			return -EIO;
+
+		blkaddr = dblock_addr(blk);
+		blklen = dblock_len(blk);
+	}
+	return 0;
+}
+EXPORT_SYMBOL(hermes_program);
+
+static int __init init_hermes_dld(void)
+{
+	return 0;
+}
+
+static void __exit exit_hermes_dld(void)
+{
+}
+
+module_init(init_hermes_dld);
+module_exit(exit_hermes_dld);
+
+/*** Default plugging data for Hermes I ***/
+/* Values from wl_lkm_718/hcf/dhf.c */
+
+#define DEFINE_DEFAULT_PDR(pid, length, data)				\
+static const struct {							\
+	__le16 len;							\
+	__le16 id;							\
+	u8 val[length];							\
+} __attribute__ ((packed)) default_pdr_data_##pid = {			\
+	__constant_cpu_to_le16((sizeof(default_pdr_data_##pid)/		\
+				sizeof(__le16)) - 1),			\
+	__constant_cpu_to_le16(pid),					\
+	data								\
+}
+
+#define DEFAULT_PDR(pid) default_pdr_data_##pid
+
+/*  HWIF Compatiblity */
+DEFINE_DEFAULT_PDR(0x0005, 10, "\x00\x00\x06\x00\x01\x00\x01\x00\x01\x00");
+
+/* PPPPSign */
+DEFINE_DEFAULT_PDR(0x0108, 4, "\x00\x00\x00\x00");
+
+/* PPPPProf */
+DEFINE_DEFAULT_PDR(0x0109, 10, "\x00\x00\x00\x00\x03\x00\x00\x00\x00\x00");
+
+/* Antenna diversity */
+DEFINE_DEFAULT_PDR(0x0150, 2, "\x00\x3F");
+
+/* Modem VCO band Set-up */
+DEFINE_DEFAULT_PDR(0x0160, 28,
+		   "\x00\x00\x00\x00\x00\x00\x00\x00"
+		   "\x00\x00\x00\x00\x00\x00\x00\x00"
+		   "\x00\x00\x00\x00\x00\x00\x00\x00"
+		   "\x00\x00\x00\x00");
+
+/* Modem Rx Gain Table Values */
+DEFINE_DEFAULT_PDR(0x0161, 256,
+		   "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
+		   "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
+		   "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
+		   "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
+		   "\x3F\x01\x3E\01\x3E\x01\x3D\x01"
+		   "\x3D\x01\x3C\01\x3C\x01\x3B\x01"
+		   "\x3B\x01\x3A\01\x3A\x01\x39\x01"
+		   "\x39\x01\x38\01\x38\x01\x37\x01"
+		   "\x37\x01\x36\01\x36\x01\x35\x01"
+		   "\x35\x01\x34\01\x34\x01\x33\x01"
+		   "\x33\x01\x32\x01\x32\x01\x31\x01"
+		   "\x31\x01\x30\x01\x30\x01\x7B\x01"
+		   "\x7B\x01\x7A\x01\x7A\x01\x79\x01"
+		   "\x79\x01\x78\x01\x78\x01\x77\x01"
+		   "\x77\x01\x76\x01\x76\x01\x75\x01"
+		   "\x75\x01\x74\x01\x74\x01\x73\x01"
+		   "\x73\x01\x72\x01\x72\x01\x71\x01"
+		   "\x71\x01\x70\x01\x70\x01\x68\x01"
+		   "\x68\x01\x67\x01\x67\x01\x66\x01"
+		   "\x66\x01\x65\x01\x65\x01\x57\x01"
+		   "\x57\x01\x56\x01\x56\x01\x55\x01"
+		   "\x55\x01\x54\x01\x54\x01\x53\x01"
+		   "\x53\x01\x52\x01\x52\x01\x51\x01"
+		   "\x51\x01\x50\x01\x50\x01\x48\x01"
+		   "\x48\x01\x47\x01\x47\x01\x46\x01"
+		   "\x46\x01\x45\x01\x45\x01\x44\x01"
+		   "\x44\x01\x43\x01\x43\x01\x42\x01"
+		   "\x42\x01\x41\x01\x41\x01\x40\x01"
+		   "\x40\x01\x40\x01\x40\x01\x40\x01"
+		   "\x40\x01\x40\x01\x40\x01\x40\x01"
+		   "\x40\x01\x40\x01\x40\x01\x40\x01"
+		   "\x40\x01\x40\x01\x40\x01\x40\x01");
+
+/* Write PDA according to certain rules.
+ *
+ * For every production data record, look for a previous setting in
+ * the pda, and use that.
+ *
+ * For certain records, use defaults if they are not found in pda.
+ */
+int hermes_apply_pda_with_defaults(hermes_t *hw,
+				   const char *first_pdr,
+				   const __le16 *pda)
+{
+	const struct pdr *pdr = (const struct pdr *) first_pdr;
+	struct pdi *first_pdi = (struct pdi *) &pda[2];
+	struct pdi *pdi;
+	struct pdi *default_pdi = NULL;
+	struct pdi *outdoor_pdi;
+	void *end = (void *)first_pdr + MAX_PDA_SIZE;
+	int record_id;
+
+	while (((void *)pdr < end) &&
+	       (pdr_id(pdr) != PDI_END)) {
+		/*
+		 * For spectrum_cs firmwares,
+		 * PDR area is currently not terminated by PDI_END.
+		 * It's followed by CRC records, which have the type
+		 * field where PDR has length.  The type can be 0 or 1.
+		 */
+		if (pdr_len(pdr) < 2)
+			break;
+		record_id = pdr_id(pdr);
+
+		pdi = hermes_find_pdi(first_pdi, record_id);
+		if (pdi)
+			printk(KERN_DEBUG PFX "Found record 0x%04x at %p\n",
+			       record_id, pdi);
+
+		switch (record_id) {
+		case 0x110: /* Modem REFDAC values */
+		case 0x120: /* Modem VGDAC values */
+			outdoor_pdi = hermes_find_pdi(first_pdi, record_id + 1);
+			default_pdi = NULL;
+			if (outdoor_pdi) {
+				pdi = outdoor_pdi;
+				printk(KERN_DEBUG PFX
+				       "Using outdoor record 0x%04x at %p\n",
+				       record_id + 1, pdi);
+			}
+			break;
+		case 0x5: /*  HWIF Compatiblity */
+			default_pdi = (struct pdi *) &DEFAULT_PDR(0x0005);
+			break;
+		case 0x108: /* PPPPSign */
+			default_pdi = (struct pdi *) &DEFAULT_PDR(0x0108);
+			break;
+		case 0x109: /* PPPPProf */
+			default_pdi = (struct pdi *) &DEFAULT_PDR(0x0109);
+			break;
+		case 0x150: /* Antenna diversity */
+			default_pdi = (struct pdi *) &DEFAULT_PDR(0x0150);
+			break;
+		case 0x160: /* Modem VCO band Set-up */
+			default_pdi = (struct pdi *) &DEFAULT_PDR(0x0160);
+			break;
+		case 0x161: /* Modem Rx Gain Table Values */
+			default_pdi = (struct pdi *) &DEFAULT_PDR(0x0161);
+			break;
+		default:
+			default_pdi = NULL;
+			break;
+		}
+		if (!pdi && default_pdi) {
+			/* Use default */
+			pdi = default_pdi;
+			printk(KERN_DEBUG PFX
+			       "Using default record 0x%04x at %p\n",
+			       record_id, pdi);
+		}
+
+		if (pdi) {
+			/* Lengths of the data in PDI and PDR must match */
+			if (pdi_len(pdi) == pdr_len(pdr)) {
+				/* do the actual plugging */
+				hermes_aux_setaddr(hw, pdr_addr(pdr));
+				hermes_write_bytes(hw, HERMES_AUXDATA,
+						   pdi->data, pdi_len(pdi));
+			}
+		}
+
+		pdr++;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(hermes_apply_pda_with_defaults);
diff --git a/drivers/net/wireless/orinoco/hermes_dld.h b/drivers/net/wireless/orinoco/hermes_dld.h
new file mode 100644
index 00000000000..6fcb2627799
--- /dev/null
+++ b/drivers/net/wireless/orinoco/hermes_dld.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2007, David Kilroy
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above.  If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL.  If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ */
+#ifndef _HERMES_DLD_H
+#define _HERMES_DLD_H
+
+#include "hermes.h"
+
+int hermesi_program_init(hermes_t *hw, u32 offset);
+int hermesi_program_end(hermes_t *hw);
+int hermes_program(hermes_t *hw, const char *first_block, const char *end);
+
+int hermes_read_pda(hermes_t *hw,
+		    __le16 *pda,
+		    u32 pda_addr,
+		    u16 pda_len,
+		    int use_eeprom);
+int hermes_apply_pda(hermes_t *hw,
+		     const char *first_pdr,
+		     const __le16 *pda);
+int hermes_apply_pda_with_defaults(hermes_t *hw,
+				   const char *first_pdr,
+				   const __le16 *pda);
+
+size_t hermes_blocks_length(const char *first_block);
+
+#endif /* _HERMES_DLD_H */
diff --git a/drivers/net/wireless/orinoco/hermes_rid.h b/drivers/net/wireless/orinoco/hermes_rid.h
new file mode 100644
index 00000000000..42eb67dea1d
--- /dev/null
+++ b/drivers/net/wireless/orinoco/hermes_rid.h
@@ -0,0 +1,165 @@
+#ifndef _HERMES_RID_H
+#define _HERMES_RID_H
+
+/*
+ * Configuration RIDs
+ */
+#define HERMES_RID_CNFPORTTYPE			0xFC00
+#define HERMES_RID_CNFOWNMACADDR		0xFC01
+#define HERMES_RID_CNFDESIREDSSID		0xFC02
+#define HERMES_RID_CNFOWNCHANNEL		0xFC03
+#define HERMES_RID_CNFOWNSSID			0xFC04
+#define HERMES_RID_CNFOWNATIMWINDOW		0xFC05
+#define HERMES_RID_CNFSYSTEMSCALE		0xFC06
+#define HERMES_RID_CNFMAXDATALEN		0xFC07
+#define HERMES_RID_CNFWDSADDRESS		0xFC08
+#define HERMES_RID_CNFPMENABLED			0xFC09
+#define HERMES_RID_CNFPMEPS			0xFC0A
+#define HERMES_RID_CNFMULTICASTRECEIVE		0xFC0B
+#define HERMES_RID_CNFMAXSLEEPDURATION		0xFC0C
+#define HERMES_RID_CNFPMHOLDOVERDURATION	0xFC0D
+#define HERMES_RID_CNFOWNNAME			0xFC0E
+#define HERMES_RID_CNFOWNDTIMPERIOD		0xFC10
+#define HERMES_RID_CNFWDSADDRESS1		0xFC11
+#define HERMES_RID_CNFWDSADDRESS2		0xFC12
+#define HERMES_RID_CNFWDSADDRESS3		0xFC13
+#define HERMES_RID_CNFWDSADDRESS4		0xFC14
+#define HERMES_RID_CNFWDSADDRESS5		0xFC15
+#define HERMES_RID_CNFWDSADDRESS6		0xFC16
+#define HERMES_RID_CNFMULTICASTPMBUFFERING	0xFC17
+#define HERMES_RID_CNFWEPENABLED_AGERE		0xFC20
+#define HERMES_RID_CNFAUTHENTICATION_AGERE	0xFC21
+#define HERMES_RID_CNFMANDATORYBSSID_SYMBOL	0xFC21
+#define HERMES_RID_CNFDROPUNENCRYPTED		0xFC22
+#define HERMES_RID_CNFWEPDEFAULTKEYID		0xFC23
+#define HERMES_RID_CNFDEFAULTKEY0		0xFC24
+#define HERMES_RID_CNFDEFAULTKEY1		0xFC25
+#define HERMES_RID_CNFMWOROBUST_AGERE		0xFC25
+#define HERMES_RID_CNFDEFAULTKEY2		0xFC26
+#define HERMES_RID_CNFDEFAULTKEY3		0xFC27
+#define HERMES_RID_CNFWEPFLAGS_INTERSIL		0xFC28
+#define HERMES_RID_CNFWEPKEYMAPPINGTABLE	0xFC29
+#define HERMES_RID_CNFAUTHENTICATION		0xFC2A
+#define HERMES_RID_CNFMAXASSOCSTA		0xFC2B
+#define	HERMES_RID_CNFKEYLENGTH_SYMBOL		0xFC2B
+#define HERMES_RID_CNFTXCONTROL			0xFC2C
+#define HERMES_RID_CNFROAMINGMODE		0xFC2D
+#define HERMES_RID_CNFHOSTAUTHENTICATION	0xFC2E
+#define HERMES_RID_CNFRCVCRCERROR		0xFC30
+#define HERMES_RID_CNFMMLIFE			0xFC31
+#define HERMES_RID_CNFALTRETRYCOUNT		0xFC32
+#define HERMES_RID_CNFBEACONINT			0xFC33
+#define HERMES_RID_CNFAPPCFINFO			0xFC34
+#define HERMES_RID_CNFSTAPCFINFO		0xFC35
+#define HERMES_RID_CNFPRIORITYQUSAGE		0xFC37
+#define HERMES_RID_CNFTIMCTRL			0xFC40
+#define HERMES_RID_CNFTHIRTY2TALLY		0xFC42
+#define HERMES_RID_CNFENHSECURITY		0xFC43
+#define HERMES_RID_CNFGROUPADDRESSES		0xFC80
+#define HERMES_RID_CNFCREATEIBSS		0xFC81
+#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD	0xFC82
+#define HERMES_RID_CNFRTSTHRESHOLD		0xFC83
+#define HERMES_RID_CNFTXRATECONTROL		0xFC84
+#define HERMES_RID_CNFPROMISCUOUSMODE		0xFC85
+#define HERMES_RID_CNFBASICRATES_SYMBOL		0xFC8A
+#define HERMES_RID_CNFPREAMBLE_SYMBOL		0xFC8C
+#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD0	0xFC90
+#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD1	0xFC91
+#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD2	0xFC92
+#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD3	0xFC93
+#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD4	0xFC94
+#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD5	0xFC95
+#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD6	0xFC96
+#define HERMES_RID_CNFRTSTHRESHOLD0		0xFC97
+#define HERMES_RID_CNFRTSTHRESHOLD1		0xFC98
+#define HERMES_RID_CNFRTSTHRESHOLD2		0xFC99
+#define HERMES_RID_CNFRTSTHRESHOLD3		0xFC9A
+#define HERMES_RID_CNFRTSTHRESHOLD4		0xFC9B
+#define HERMES_RID_CNFRTSTHRESHOLD5		0xFC9C
+#define HERMES_RID_CNFRTSTHRESHOLD6		0xFC9D
+#define HERMES_RID_CNFHOSTSCAN_SYMBOL		0xFCAB
+#define HERMES_RID_CNFSHORTPREAMBLE		0xFCB0
+#define HERMES_RID_CNFWEPKEYS_AGERE		0xFCB0
+#define HERMES_RID_CNFEXCLUDELONGPREAMBLE	0xFCB1
+#define HERMES_RID_CNFTXKEY_AGERE		0xFCB1
+#define HERMES_RID_CNFAUTHENTICATIONRSPTO	0xFCB2
+#define HERMES_RID_CNFSCANSSID_AGERE		0xFCB2
+#define HERMES_RID_CNFBASICRATES		0xFCB3
+#define HERMES_RID_CNFSUPPORTEDRATES		0xFCB4
+#define HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE	0xFCB4
+#define HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE	0xFCB5
+#define HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE	0xFCB6
+#define HERMES_RID_CNFADDMAPPEDTKIPKEY_AGERE	0xFCB7
+#define HERMES_RID_CNFREMMAPPEDTKIPKEY_AGERE	0xFCB8
+#define HERMES_RID_CNFSETWPACAPABILITIES_AGERE	0xFCB9
+#define HERMES_RID_CNFCACHEDPMKADDRESS		0xFCBA
+#define HERMES_RID_CNFREMOVEPMKADDRESS		0xFCBB
+#define HERMES_RID_CNFSCANCHANNELS2GHZ		0xFCC2
+#define HERMES_RID_CNFDISASSOCIATE		0xFCC8
+#define HERMES_RID_CNFTICKTIME			0xFCE0
+#define HERMES_RID_CNFSCANREQUEST		0xFCE1
+#define HERMES_RID_CNFJOINREQUEST		0xFCE2
+#define HERMES_RID_CNFAUTHENTICATESTATION	0xFCE3
+#define HERMES_RID_CNFCHANNELINFOREQUEST	0xFCE4
+#define HERMES_RID_CNFHOSTSCAN			0xFCE5
+
+/*
+ * Information RIDs
+ */
+#define HERMES_RID_MAXLOADTIME			0xFD00
+#define HERMES_RID_DOWNLOADBUFFER		0xFD01
+#define HERMES_RID_PRIID			0xFD02
+#define HERMES_RID_PRISUPRANGE			0xFD03
+#define HERMES_RID_CFIACTRANGES			0xFD04
+#define HERMES_RID_NICSERNUM			0xFD0A
+#define HERMES_RID_NICID			0xFD0B
+#define HERMES_RID_MFISUPRANGE			0xFD0C
+#define HERMES_RID_CFISUPRANGE			0xFD0D
+#define HERMES_RID_CHANNELLIST			0xFD10
+#define HERMES_RID_REGULATORYDOMAINS		0xFD11
+#define HERMES_RID_TEMPTYPE			0xFD12
+#define HERMES_RID_CIS				0xFD13
+#define HERMES_RID_STAID			0xFD20
+#define HERMES_RID_STASUPRANGE			0xFD21
+#define HERMES_RID_MFIACTRANGES			0xFD22
+#define HERMES_RID_CFIACTRANGES2		0xFD23
+#define HERMES_RID_SECONDARYVERSION_SYMBOL	0xFD24
+#define HERMES_RID_PORTSTATUS			0xFD40
+#define HERMES_RID_CURRENTSSID			0xFD41
+#define HERMES_RID_CURRENTBSSID			0xFD42
+#define HERMES_RID_COMMSQUALITY			0xFD43
+#define HERMES_RID_CURRENTTXRATE		0xFD44
+#define HERMES_RID_CURRENTBEACONINTERVAL	0xFD45
+#define HERMES_RID_CURRENTSCALETHRESHOLDS	0xFD46
+#define HERMES_RID_PROTOCOLRSPTIME		0xFD47
+#define HERMES_RID_SHORTRETRYLIMIT		0xFD48
+#define HERMES_RID_LONGRETRYLIMIT		0xFD49
+#define HERMES_RID_MAXTRANSMITLIFETIME		0xFD4A
+#define HERMES_RID_MAXRECEIVELIFETIME		0xFD4B
+#define HERMES_RID_CFPOLLABLE			0xFD4C
+#define HERMES_RID_AUTHENTICATIONALGORITHMS	0xFD4D
+#define HERMES_RID_PRIVACYOPTIONIMPLEMENTED	0xFD4F
+#define HERMES_RID_DBMCOMMSQUALITY_INTERSIL	0xFD51
+#define HERMES_RID_CURRENTTXRATE1		0xFD80
+#define HERMES_RID_CURRENTTXRATE2		0xFD81
+#define HERMES_RID_CURRENTTXRATE3		0xFD82
+#define HERMES_RID_CURRENTTXRATE4		0xFD83
+#define HERMES_RID_CURRENTTXRATE5		0xFD84
+#define HERMES_RID_CURRENTTXRATE6		0xFD85
+#define HERMES_RID_OWNMACADDR			0xFD86
+#define HERMES_RID_SCANRESULTSTABLE		0xFD88
+#define HERMES_RID_CURRENT_COUNTRY_INFO		0xFD89
+#define HERMES_RID_CURRENT_WPA_IE		0xFD8A
+#define HERMES_RID_CURRENT_TKIP_IV		0xFD8B
+#define HERMES_RID_CURRENT_ASSOC_REQ_INFO	0xFD8C
+#define HERMES_RID_CURRENT_ASSOC_RESP_INFO	0xFD8D
+#define HERMES_RID_TXQUEUEEMPTY			0xFD91
+#define HERMES_RID_PHYTYPE			0xFDC0
+#define HERMES_RID_CURRENTCHANNEL		0xFDC1
+#define HERMES_RID_CURRENTPOWERSTATE		0xFDC2
+#define HERMES_RID_CCAMODE			0xFDC3
+#define HERMES_RID_SUPPORTEDDATARATES		0xFDC6
+#define HERMES_RID_BUILDSEQ			0xFFFE
+#define HERMES_RID_FWID				0xFFFF
+
+#endif
diff --git a/drivers/net/wireless/orinoco/orinoco.c b/drivers/net/wireless/orinoco/orinoco.c
new file mode 100644
index 00000000000..f4ea08f9697
--- /dev/null
+++ b/drivers/net/wireless/orinoco/orinoco.c
@@ -0,0 +1,6032 @@
+/* orinoco.c - (formerly known as dldwd_cs.c and orinoco_cs.c)
+ *
+ * A driver for Hermes or Prism 2 chipset based PCMCIA wireless
+ * adaptors, with Lucent/Agere, Intersil or Symbol firmware.
+ *
+ * Current maintainers (as of 29 September 2003) are:
+ * 	Pavel Roskin <proski AT gnu.org>
+ * and	David Gibson <hermes AT gibson.dropbear.id.au>
+ *
+ * (C) Copyright David Gibson, IBM Corporation 2001-2003.
+ * Copyright (C) 2000 David Gibson, Linuxcare Australia.
+ *	With some help from :
+ * Copyright (C) 2001 Jean Tourrilhes, HP Labs
+ * Copyright (C) 2001 Benjamin Herrenschmidt
+ *
+ * Based on dummy_cs.c 1.27 2000/06/12 21:27:25
+ *
+ * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy
+ * AT fasta.fh-dortmund.de>
+ *      http://www.stud.fh-dortmund.de/~andy/wvlan/
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds AT users.sourceforge.net>.  Portions created by David
+ * A. Hinds are Copyright (C) 1999 David A. Hinds.  All Rights
+ * Reserved.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above.  If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL.  If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.  */
+
+/*
+ * TODO
+ *	o Handle de-encapsulation within network layer, provide 802.11
+ *	  headers (patch from Thomas 'Dent' Mirlacher)
+ *	o Fix possible races in SPY handling.
+ *	o Disconnect wireless extensions from fundamental configuration.
+ *	o (maybe) Software WEP support (patch from Stano Meduna).
+ *	o (maybe) Use multiple Tx buffers - driver handling queue
+ *	  rather than firmware.
+ */
+
+/* Locking and synchronization:
+ *
+ * The basic principle is that everything is serialized through a
+ * single spinlock, priv->lock.  The lock is used in user, bh and irq
+ * context, so when taken outside hardirq context it should always be
+ * taken with interrupts disabled.  The lock protects both the
+ * hardware and the struct orinoco_private.
+ *
+ * Another flag, priv->hw_unavailable indicates that the hardware is
+ * unavailable for an extended period of time (e.g. suspended, or in
+ * the middle of a hard reset).  This flag is protected by the
+ * spinlock.  All code which touches the hardware should check the
+ * flag after taking the lock, and if it is set, give up on whatever
+ * they are doing and drop the lock again.  The orinoco_lock()
+ * function handles this (it unlocks and returns -EBUSY if
+ * hw_unavailable is non-zero).
+ */
+
+#define DRIVER_NAME "orinoco"
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/firmware.h>
+#include <linux/if_arp.h>
+#include <linux/wireless.h>
+#include <linux/ieee80211.h>
+#include <net/iw_handler.h>
+
+#include <linux/scatterlist.h>
+#include <linux/crypto.h>
+
+#include "hermes_rid.h"
+#include "hermes_dld.h"
+#include "orinoco.h"
+
+/********************************************************************/
+/* Module information                                               */
+/********************************************************************/
+
+MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & David Gibson <hermes@gibson.dropbear.id.au>");
+MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based and similar wireless cards");
+MODULE_LICENSE("Dual MPL/GPL");
+
+/* Level of debugging. Used in the macros in orinoco.h */
+#ifdef ORINOCO_DEBUG
+int orinoco_debug = ORINOCO_DEBUG;
+module_param(orinoco_debug, int, 0644);
+MODULE_PARM_DESC(orinoco_debug, "Debug level");
+EXPORT_SYMBOL(orinoco_debug);
+#endif
+
+static int suppress_linkstatus; /* = 0 */
+module_param(suppress_linkstatus, bool, 0644);
+MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes");
+static int ignore_disconnect; /* = 0 */
+module_param(ignore_disconnect, int, 0644);
+MODULE_PARM_DESC(ignore_disconnect, "Don't report lost link to the network layer");
+
+static int force_monitor; /* = 0 */
+module_param(force_monitor, int, 0644);
+MODULE_PARM_DESC(force_monitor, "Allow monitor mode for all firmware versions");
+
+/********************************************************************/
+/* Compile time configuration and compatibility stuff               */
+/********************************************************************/
+
+/* We do this this way to avoid ifdefs in the actual code */
+#ifdef WIRELESS_SPY
+#define SPY_NUMBER(priv)	(priv->spy_data.spy_number)
+#else
+#define SPY_NUMBER(priv)	0
+#endif /* WIRELESS_SPY */
+
+/********************************************************************/
+/* Internal constants                                               */
+/********************************************************************/
+
+/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */
+static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
+#define ENCAPS_OVERHEAD		(sizeof(encaps_hdr) + 2)
+
+#define ORINOCO_MIN_MTU		256
+#define ORINOCO_MAX_MTU		(IEEE80211_MAX_DATA_LEN - ENCAPS_OVERHEAD)
+
+#define SYMBOL_MAX_VER_LEN	(14)
+#define USER_BAP		0
+#define IRQ_BAP			1
+#define MAX_IRQLOOPS_PER_IRQ	10
+#define MAX_IRQLOOPS_PER_JIFFY	(20000/HZ) /* Based on a guestimate of
+					    * how many events the
+					    * device could
+					    * legitimately generate */
+#define SMALL_KEY_SIZE		5
+#define LARGE_KEY_SIZE		13
+#define TX_NICBUF_SIZE_BUG	1585		/* Bug in Symbol firmware */
+
+#define DUMMY_FID		0xFFFF
+
+/*#define MAX_MULTICAST(priv)	(priv->firmware_type == FIRMWARE_TYPE_AGERE ? \
+  HERMES_MAX_MULTICAST : 0)*/
+#define MAX_MULTICAST(priv)	(HERMES_MAX_MULTICAST)
+
+#define ORINOCO_INTEN	 	(HERMES_EV_RX | HERMES_EV_ALLOC \
+				 | HERMES_EV_TX | HERMES_EV_TXEXC \
+				 | HERMES_EV_WTERR | HERMES_EV_INFO \
+				 | HERMES_EV_INFDROP )
+
+#define MAX_RID_LEN 1024
+
+static const struct iw_handler_def orinoco_handler_def;
+static const struct ethtool_ops orinoco_ethtool_ops;
+
+/********************************************************************/
+/* Data tables                                                      */
+/********************************************************************/
+
+/* The frequency of each channel in MHz */
+static const long channel_frequency[] = {
+	2412, 2417, 2422, 2427, 2432, 2437, 2442,
+	2447, 2452, 2457, 2462, 2467, 2472, 2484
+};
+#define NUM_CHANNELS ARRAY_SIZE(channel_frequency)
+
+/* This tables gives the actual meanings of the bitrate IDs returned
+ * by the firmware. */
+static struct {
+	int bitrate; /* in 100s of kilobits */
+	int automatic;
+	u16 agere_txratectrl;
+	u16 intersil_txratectrl;
+} bitrate_table[] = {
+	{110, 1,  3, 15}, /* Entry 0 is the default */
+	{10,  0,  1,  1},
+	{10,  1,  1,  1},
+	{20,  0,  2,  2},
+	{20,  1,  6,  3},
+	{55,  0,  4,  4},
+	{55,  1,  7,  7},
+	{110, 0,  5,  8},
+};
+#define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table)
+
+/********************************************************************/
+/* Data types                                                       */
+/********************************************************************/
+
+/* Beginning of the Tx descriptor, used in TxExc handling */
+struct hermes_txexc_data {
+	struct hermes_tx_descriptor desc;
+	__le16 frame_ctl;
+	__le16 duration_id;
+	u8 addr1[ETH_ALEN];
+} __attribute__ ((packed));
+
+/* Rx frame header except compatibility 802.3 header */
+struct hermes_rx_descriptor {
+	/* Control */
+	__le16 status;
+	__le32 time;
+	u8 silence;
+	u8 signal;
+	u8 rate;
+	u8 rxflow;
+	__le32 reserved;
+
+	/* 802.11 header */
+	__le16 frame_ctl;
+	__le16 duration_id;
+	u8 addr1[ETH_ALEN];
+	u8 addr2[ETH_ALEN];
+	u8 addr3[ETH_ALEN];
+	__le16 seq_ctl;
+	u8 addr4[ETH_ALEN];
+
+	/* Data length */
+	__le16 data_len;
+} __attribute__ ((packed));
+
+/********************************************************************/
+/* Function prototypes                                              */
+/********************************************************************/
+
+static int __orinoco_program_rids(struct net_device *dev);
+static void __orinoco_set_multicast_list(struct net_device *dev);
+
+/********************************************************************/
+/* Michael MIC crypto setup                                         */
+/********************************************************************/
+#define MICHAEL_MIC_LEN 8
+static int orinoco_mic_init(struct orinoco_private *priv)
+{
+	priv->tx_tfm_mic = crypto_alloc_hash("michael_mic", 0, 0);
+	if (IS_ERR(priv->tx_tfm_mic)) {
+		printk(KERN_DEBUG "orinoco_mic_init: could not allocate "
+		       "crypto API michael_mic\n");
+		priv->tx_tfm_mic = NULL;
+		return -ENOMEM;
+	}
+
+	priv->rx_tfm_mic = crypto_alloc_hash("michael_mic", 0, 0);
+	if (IS_ERR(priv->rx_tfm_mic)) {
+		printk(KERN_DEBUG "orinoco_mic_init: could not allocate "
+		       "crypto API michael_mic\n");
+		priv->rx_tfm_mic = NULL;
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void orinoco_mic_free(struct orinoco_private *priv)
+{
+	if (priv->tx_tfm_mic)
+		crypto_free_hash(priv->tx_tfm_mic);
+	if (priv->rx_tfm_mic)
+		crypto_free_hash(priv->rx_tfm_mic);
+}
+
+static int michael_mic(struct crypto_hash *tfm_michael, u8 *key,
+		       u8 *da, u8 *sa, u8 priority,
+		       u8 *data, size_t data_len, u8 *mic)
+{
+	struct hash_desc desc;
+	struct scatterlist sg[2];
+	u8 hdr[ETH_HLEN + 2]; /* size of header + padding */
+
+	if (tfm_michael == NULL) {
+		printk(KERN_WARNING "michael_mic: tfm_michael == NULL\n");
+		return -1;
+	}
+
+	/* Copy header into buffer. We need the padding on the end zeroed */
+	memcpy(&hdr[0], da, ETH_ALEN);
+	memcpy(&hdr[ETH_ALEN], sa, ETH_ALEN);
+	hdr[ETH_ALEN*2] = priority;
+	hdr[ETH_ALEN*2+1] = 0;
+	hdr[ETH_ALEN*2+2] = 0;
+	hdr[ETH_ALEN*2+3] = 0;
+
+	/* Use scatter gather to MIC header and data in one go */
+	sg_init_table(sg, 2);
+	sg_set_buf(&sg[0], hdr, sizeof(hdr));
+	sg_set_buf(&sg[1], data, data_len);
+
+	if (crypto_hash_setkey(tfm_michael, key, MIC_KEYLEN))
+		return -1;
+
+	desc.tfm = tfm_michael;
+	desc.flags = 0;
+	return crypto_hash_digest(&desc, sg, data_len + sizeof(hdr),
+				  mic);
+}
+
+/********************************************************************/
+/* Internal helper functions                                        */
+/********************************************************************/
+
+static inline void set_port_type(struct orinoco_private *priv)
+{
+	switch (priv->iw_mode) {
+	case IW_MODE_INFRA:
+		priv->port_type = 1;
+		priv->createibss = 0;
+		break;
+	case IW_MODE_ADHOC:
+		if (priv->prefer_port3) {
+			priv->port_type = 3;
+			priv->createibss = 0;
+		} else {
+			priv->port_type = priv->ibss_port;
+			priv->createibss = 1;
+		}
+		break;
+	case IW_MODE_MONITOR:
+		priv->port_type = 3;
+		priv->createibss = 0;
+		break;
+	default:
+		printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n",
+		       priv->ndev->name);
+	}
+}
+
+#define ORINOCO_MAX_BSS_COUNT	64
+static int orinoco_bss_data_allocate(struct orinoco_private *priv)
+{
+	if (priv->bss_xbss_data)
+		return 0;
+
+	if (priv->has_ext_scan)
+		priv->bss_xbss_data = kzalloc(ORINOCO_MAX_BSS_COUNT *
+					      sizeof(struct xbss_element),
+					      GFP_KERNEL);
+	else
+		priv->bss_xbss_data = kzalloc(ORINOCO_MAX_BSS_COUNT *
+					      sizeof(struct bss_element),
+					      GFP_KERNEL);
+
+	if (!priv->bss_xbss_data) {
+		printk(KERN_WARNING "Out of memory allocating beacons");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static void orinoco_bss_data_free(struct orinoco_private *priv)
+{
+	kfree(priv->bss_xbss_data);
+	priv->bss_xbss_data = NULL;
+}
+
+#define PRIV_BSS	((struct bss_element *)priv->bss_xbss_data)
+#define PRIV_XBSS	((struct xbss_element *)priv->bss_xbss_data)
+static void orinoco_bss_data_init(struct orinoco_private *priv)
+{
+	int i;
+
+	INIT_LIST_HEAD(&priv->bss_free_list);
+	INIT_LIST_HEAD(&priv->bss_list);
+	if (priv->has_ext_scan)
+		for (i = 0; i < ORINOCO_MAX_BSS_COUNT; i++)
+			list_add_tail(&(PRIV_XBSS[i].list),
+				      &priv->bss_free_list);
+	else
+		for (i = 0; i < ORINOCO_MAX_BSS_COUNT; i++)
+			list_add_tail(&(PRIV_BSS[i].list),
+				      &priv->bss_free_list);
+
+}
+
+static inline u8 *orinoco_get_ie(u8 *data, size_t len,
+				 enum ieee80211_eid eid)
+{
+	u8 *p = data;
+	while ((p + 2) < (data + len)) {
+		if (p[0] == eid)
+			return p;
+		p += p[1] + 2;
+	}
+	return NULL;
+}
+
+#define WPA_OUI_TYPE	"\x00\x50\xF2\x01"
+#define WPA_SELECTOR_LEN 4
+static inline u8 *orinoco_get_wpa_ie(u8 *data, size_t len)
+{
+	u8 *p = data;
+	while ((p + 2 + WPA_SELECTOR_LEN) < (data + len)) {
+		if ((p[0] == WLAN_EID_GENERIC) &&
+		    (memcmp(&p[2], WPA_OUI_TYPE, WPA_SELECTOR_LEN) == 0))
+			return p;
+		p += p[1] + 2;
+	}
+	return NULL;
+}
+
+
+/********************************************************************/
+/* Download functionality                                           */
+/********************************************************************/
+
+struct fw_info {
+	char *pri_fw;
+	char *sta_fw;
+	char *ap_fw;
+	u32 pda_addr;
+	u16 pda_size;
+};
+
+const static struct fw_info orinoco_fw[] = {
+	{ "", "agere_sta_fw.bin", "agere_ap_fw.bin", 0x00390000, 1000 },
+	{ "", "prism_sta_fw.bin", "prism_ap_fw.bin", 0, 1024 },
+	{ "symbol_sp24t_prim_fw", "symbol_sp24t_sec_fw", "", 0x00003100, 512 }
+};
+
+/* Structure used to access fields in FW
+ * Make sure LE decoding macros are used
+ */
+struct orinoco_fw_header {
+	char hdr_vers[6];       /* ASCII string for header version */
+	__le16 headersize;      /* Total length of header */
+	__le32 entry_point;     /* NIC entry point */
+	__le32 blocks;          /* Number of blocks to program */
+	__le32 block_offset;    /* Offset of block data from eof header */
+	__le32 pdr_offset;      /* Offset to PDR data from eof header */
+	__le32 pri_offset;      /* Offset to primary plug data */
+	__le32 compat_offset;   /* Offset to compatibility data*/
+	char signature[0];      /* FW signature length headersize-20 */
+} __attribute__ ((packed));
+
+/* Download either STA or AP firmware into the card. */
+static int
+orinoco_dl_firmware(struct orinoco_private *priv,
+		    const struct fw_info *fw,
+		    int ap)
+{
+	/* Plug Data Area (PDA) */
+	__le16 *pda;
+
+	hermes_t *hw = &priv->hw;
+	const struct firmware *fw_entry;
+	const struct orinoco_fw_header *hdr;
+	const unsigned char *first_block;
+	const unsigned char *end;
+	const char *firmware;
+	struct net_device *dev = priv->ndev;
+	int err = 0;
+
+	pda = kzalloc(fw->pda_size, GFP_KERNEL);
+	if (!pda)
+		return -ENOMEM;
+
+	if (ap)
+		firmware = fw->ap_fw;
+	else
+		firmware = fw->sta_fw;
+
+	printk(KERN_DEBUG "%s: Attempting to download firmware %s\n",
+	       dev->name, firmware);
+
+	/* Read current plug data */
+	err = hermes_read_pda(hw, pda, fw->pda_addr, fw->pda_size, 0);
+	printk(KERN_DEBUG "%s: Read PDA returned %d\n", dev->name, err);
+	if (err)
+		goto free;
+
+	if (priv->cached_fw)
+		fw_entry = priv->cached_fw;
+	else {
+		err = request_firmware(&fw_entry, firmware, priv->dev);
+		if (err) {
+			printk(KERN_ERR "%s: Cannot find firmware %s\n",
+			       dev->name, firmware);
+			err = -ENOENT;
+			goto free;
+		}
+		priv->cached_fw = fw_entry;
+	}
+
+	hdr = (const struct orinoco_fw_header *) fw_entry->data;
+
+	/* Enable aux port to allow programming */
+	err = hermesi_program_init(hw, le32_to_cpu(hdr->entry_point));
+	printk(KERN_DEBUG "%s: Program init returned %d\n", dev->name, err);
+	if (err != 0)
+		goto abort;
+
+	/* Program data */
+	first_block = (fw_entry->data +
+		       le16_to_cpu(hdr->headersize) +
+		       le32_to_cpu(hdr->block_offset));
+	end = fw_entry->data + fw_entry->size;
+
+	err = hermes_program(hw, first_block, end);
+	printk(KERN_DEBUG "%s: Program returned %d\n", dev->name, err);
+	if (err != 0)
+		goto abort;
+
+	/* Update production data */
+	first_block = (fw_entry->data +
+		       le16_to_cpu(hdr->headersize) +
+		       le32_to_cpu(hdr->pdr_offset));
+
+	err = hermes_apply_pda_with_defaults(hw, first_block, pda);
+	printk(KERN_DEBUG "%s: Apply PDA returned %d\n", dev->name, err);
+	if (err)
+		goto abort;
+
+	/* Tell card we've finished */
+	err = hermesi_program_end(hw);
+	printk(KERN_DEBUG "%s: Program end returned %d\n", dev->name, err);
+	if (err != 0)
+		goto abort;
+
+	/* Check if we're running */
+	printk(KERN_DEBUG "%s: hermes_present returned %d\n",
+	       dev->name, hermes_present(hw));
+
+abort:
+	/* In case of error, assume firmware was bogus and release it */
+	if (err) {
+		priv->cached_fw = NULL;
+		release_firmware(fw_entry);
+	}
+
+free:
+	kfree(pda);
+	return err;
+}
+
+/* End markers */
+#define TEXT_END	0x1A		/* End of text header */
+
+/*
+ * Process a firmware image - stop the card, load the firmware, reset
+ * the card and make sure it responds.  For the secondary firmware take
+ * care of the PDA - read it and then write it on top of the firmware.
+ */
+static int
+symbol_dl_image(struct orinoco_private *priv, const struct fw_info *fw,
+		const unsigned char *image, const unsigned char *end,
+		int secondary)
+{
+	hermes_t *hw = &priv->hw;
+	int ret = 0;
+	const unsigned char *ptr;
+	const unsigned char *first_block;
+
+	/* Plug Data Area (PDA) */
+	__le16 *pda = NULL;
+
+	/* Binary block begins after the 0x1A marker */
+	ptr = image;
+	while (*ptr++ != TEXT_END);
+	first_block = ptr;
+
+	/* Read the PDA from EEPROM */
+	if (secondary) {
+		pda = kzalloc(fw->pda_size, GFP_KERNEL);
+		if (!pda)
+			return -ENOMEM;
+
+		ret = hermes_read_pda(hw, pda, fw->pda_addr, fw->pda_size, 1);
+		if (ret)
+			goto free;
+	}
+
+	/* Stop the firmware, so that it can be safely rewritten */
+	if (priv->stop_fw) {
+		ret = priv->stop_fw(priv, 1);
+		if (ret)
+			goto free;
+	}
+
+	/* Program the adapter with new firmware */
+	ret = hermes_program(hw, first_block, end);
+	if (ret)
+		goto free;
+
+	/* Write the PDA to the adapter */
+	if (secondary) {
+		size_t len = hermes_blocks_length(first_block);
+		ptr = first_block + len;
+		ret = hermes_apply_pda(hw, ptr, pda);
+		kfree(pda);
+		if (ret)
+			return ret;
+	}
+
+	/* Run the firmware */
+	if (priv->stop_fw) {
+		ret = priv->stop_fw(priv, 0);
+		if (ret)
+			return ret;
+	}
+
+	/* Reset hermes chip and make sure it responds */
+	ret = hermes_init(hw);
+
+	/* hermes_reset() should return 0 with the secondary firmware */
+	if (secondary && ret != 0)
+		return -ENODEV;
+
+	/* And this should work with any firmware */
+	if (!hermes_present(hw))
+		return -ENODEV;
+
+	return 0;
+
+free:
+	kfree(pda);
+	return ret;
+}
+
+
+/*
+ * Download the firmware into the card, this also does a PCMCIA soft
+ * reset on the card, to make sure it's in a sane state.
+ */
+static int
+symbol_dl_firmware(struct orinoco_private *priv,
+		   const struct fw_info *fw)
+{
+	struct net_device *dev = priv->ndev;
+	int ret;
+	const struct firmware *fw_entry;
+
+	if (request_firmware(&fw_entry, fw->pri_fw,
+			     priv->dev) != 0) {
+		printk(KERN_ERR "%s: Cannot find firmware: %s\n",
+		       dev->name, fw->pri_fw);
+		return -ENOENT;
+	}
+
+	/* Load primary firmware */
+	ret = symbol_dl_image(priv, fw, fw_entry->data,
+			      fw_entry->data + fw_entry->size, 0);
+	release_firmware(fw_entry);
+	if (ret) {
+		printk(KERN_ERR "%s: Primary firmware download failed\n",
+		       dev->name);
+		return ret;
+	}
+
+	if (request_firmware(&fw_entry, fw->sta_fw,
+			     priv->dev) != 0) {
+		printk(KERN_ERR "%s: Cannot find firmware: %s\n",
+		       dev->name, fw->sta_fw);
+		return -ENOENT;
+	}
+
+	/* Load secondary firmware */
+	ret = symbol_dl_image(priv, fw, fw_entry->data,
+			      fw_entry->data + fw_entry->size, 1);
+	release_firmware(fw_entry);
+	if (ret) {
+		printk(KERN_ERR "%s: Secondary firmware download failed\n",
+		       dev->name);
+	}
+
+	return ret;
+}
+
+static int orinoco_download(struct orinoco_private *priv)
+{
+	int err = 0;
+	/* Reload firmware */
+	switch (priv->firmware_type) {
+	case FIRMWARE_TYPE_AGERE:
+		/* case FIRMWARE_TYPE_INTERSIL: */
+		err = orinoco_dl_firmware(priv,
+					  &orinoco_fw[priv->firmware_type], 0);
+		break;
+
+	case FIRMWARE_TYPE_SYMBOL:
+		err = symbol_dl_firmware(priv,
+					 &orinoco_fw[priv->firmware_type]);
+		break;
+	case FIRMWARE_TYPE_INTERSIL:
+		break;
+	}
+	/* TODO: if we fail we probably need to reinitialise
+	 * the driver */
+
+	return err;
+}
+
+/********************************************************************/
+/* Device methods                                                   */
+/********************************************************************/
+
+static int orinoco_open(struct net_device *dev)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	unsigned long flags;
+	int err;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	err = __orinoco_up(dev);
+
+	if (! err)
+		priv->open = 1;
+
+	orinoco_unlock(priv, &flags);
+
+	return err;
+}
+
+static int orinoco_stop(struct net_device *dev)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	int err = 0;
+
+	/* We mustn't use orinoco_lock() here, because we need to be
+	   able to close the interface even if hw_unavailable is set
+	   (e.g. as we're released after a PC Card removal) */
+	spin_lock_irq(&priv->lock);
+
+	priv->open = 0;
+
+	err = __orinoco_down(dev);
+
+	spin_unlock_irq(&priv->lock);
+
+	return err;
+}
+
+static struct net_device_stats *orinoco_get_stats(struct net_device *dev)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	
+	return &priv->stats;
+}
+
+static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	hermes_t *hw = &priv->hw;
+	struct iw_statistics *wstats = &priv->wstats;
+	int err;
+	unsigned long flags;
+
+	if (! netif_device_present(dev)) {
+		printk(KERN_WARNING "%s: get_wireless_stats() called while device not present\n",
+		       dev->name);
+		return NULL; /* FIXME: Can we do better than this? */
+	}
+
+	/* If busy, return the old stats.  Returning NULL may cause
+	 * the interface to disappear from /proc/net/wireless */
+	if (orinoco_lock(priv, &flags) != 0)
+		return wstats;
+
+	/* We can't really wait for the tallies inquiry command to
+	 * complete, so we just use the previous results and trigger
+	 * a new tallies inquiry command for next time - Jean II */
+	/* FIXME: Really we should wait for the inquiry to come back -
+	 * as it is the stats we give don't make a whole lot of sense.
+	 * Unfortunately, it's not clear how to do that within the
+	 * wireless extensions framework: I think we're in user
+	 * context, but a lock seems to be held by the time we get in
+	 * here so we're not safe to sleep here. */
+	hermes_inquire(hw, HERMES_INQ_TALLIES);
+
+	if (priv->iw_mode == IW_MODE_ADHOC) {
+		memset(&wstats->qual, 0, sizeof(wstats->qual));
+		/* If a spy address is defined, we report stats of the
+		 * first spy address - Jean II */
+		if (SPY_NUMBER(priv)) {
+			wstats->qual.qual = priv->spy_data.spy_stat[0].qual;
+			wstats->qual.level = priv->spy_data.spy_stat[0].level;
+			wstats->qual.noise = priv->spy_data.spy_stat[0].noise;
+			wstats->qual.updated = priv->spy_data.spy_stat[0].updated;
+		}
+	} else {
+		struct {
+			__le16 qual, signal, noise, unused;
+		} __attribute__ ((packed)) cq;
+
+		err = HERMES_READ_RECORD(hw, USER_BAP,
+					 HERMES_RID_COMMSQUALITY, &cq);
+
+		if (!err) {
+			wstats->qual.qual = (int)le16_to_cpu(cq.qual);
+			wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95;
+			wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95;
+			wstats->qual.updated = 7;
+		}
+	}
+
+	orinoco_unlock(priv, &flags);
+	return wstats;
+}
+
+static void orinoco_set_multicast_list(struct net_device *dev)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	unsigned long flags;
+
+	if (orinoco_lock(priv, &flags) != 0) {
+		printk(KERN_DEBUG "%s: orinoco_set_multicast_list() "
+		       "called when hw_unavailable\n", dev->name);
+		return;
+	}
+
+	__orinoco_set_multicast_list(dev);
+	orinoco_unlock(priv, &flags);
+}
+
+static int orinoco_change_mtu(struct net_device *dev, int new_mtu)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+
+	if ( (new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU) )
+		return -EINVAL;
+
+	/* MTU + encapsulation + header length */
+	if ( (new_mtu + ENCAPS_OVERHEAD + sizeof(struct ieee80211_hdr)) >
+	     (priv->nicbuf_size - ETH_HLEN) )
+		return -EINVAL;
+
+	dev->mtu = new_mtu;
+
+	return 0;
+}
+
+/********************************************************************/
+/* Tx path                                                          */
+/********************************************************************/
+
+static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct net_device_stats *stats = &priv->stats;
+	hermes_t *hw = &priv->hw;
+	int err = 0;
+	u16 txfid = priv->txfid;
+	struct ethhdr *eh;
+	int tx_control;
+	unsigned long flags;
+
+	if (! netif_running(dev)) {
+		printk(KERN_ERR "%s: Tx on stopped device!\n",
+		       dev->name);
+		return NETDEV_TX_BUSY;
+	}
+	
+	if (netif_queue_stopped(dev)) {
+		printk(KERN_DEBUG "%s: Tx while transmitter busy!\n", 
+		       dev->name);
+		return NETDEV_TX_BUSY;
+	}
+	
+	if (orinoco_lock(priv, &flags) != 0) {
+		printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n",
+		       dev->name);
+		return NETDEV_TX_BUSY;
+	}
+
+	if (! netif_carrier_ok(dev) || (priv->iw_mode == IW_MODE_MONITOR)) {
+		/* Oops, the firmware hasn't established a connection,
+                   silently drop the packet (this seems to be the
+                   safest approach). */
+		goto drop;
+	}
+
+	/* Check packet length */
+	if (skb->len < ETH_HLEN)
+		goto drop;
+
+	tx_control = HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX;
+
+	if (priv->encode_alg == IW_ENCODE_ALG_TKIP)
+		tx_control |= (priv->tx_key << HERMES_MIC_KEY_ID_SHIFT) |
+			HERMES_TXCTRL_MIC;
+
+	if (priv->has_alt_txcntl) {
+		/* WPA enabled firmwares have tx_cntl at the end of
+		 * the 802.11 header.  So write zeroed descriptor and
+		 * 802.11 header at the same time
+		 */
+		char desc[HERMES_802_3_OFFSET];
+		__le16 *txcntl = (__le16 *) &desc[HERMES_TXCNTL2_OFFSET];
+
+		memset(&desc, 0, sizeof(desc));
+
+		*txcntl = cpu_to_le16(tx_control);
+		err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc),
+					txfid, 0);
+		if (err) {
+			if (net_ratelimit())
+				printk(KERN_ERR "%s: Error %d writing Tx "
+				       "descriptor to BAP\n", dev->name, err);
+			goto busy;
+		}
+	} else {
+		struct hermes_tx_descriptor desc;
+
+		memset(&desc, 0, sizeof(desc));
+
+		desc.tx_control = cpu_to_le16(tx_control);
+		err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc),
+					txfid, 0);
+		if (err) {
+			if (net_ratelimit())
+				printk(KERN_ERR "%s: Error %d writing Tx "
+				       "descriptor to BAP\n", dev->name, err);
+			goto busy;
+		}
+
+		/* Clear the 802.11 header and data length fields - some
+		 * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused
+		 * if this isn't done. */
+		hermes_clear_words(hw, HERMES_DATA0,
+				   HERMES_802_3_OFFSET - HERMES_802_11_OFFSET);
+	}
+
+	eh = (struct ethhdr *)skb->data;
+
+	/* Encapsulate Ethernet-II frames */
+	if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */
+		struct header_struct {
+			struct ethhdr eth;	/* 802.3 header */
+			u8 encap[6];		/* 802.2 header */
+		} __attribute__ ((packed)) hdr;
+
+		/* Strip destination and source from the data */
+		skb_pull(skb, 2 * ETH_ALEN);
+
+		/* And move them to a separate header */
+		memcpy(&hdr.eth, eh, 2 * ETH_ALEN);
+		hdr.eth.h_proto = htons(sizeof(encaps_hdr) + skb->len);
+		memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr));
+
+		/* Insert the SNAP header */
+		if (skb_headroom(skb) < sizeof(hdr)) {
+			printk(KERN_ERR
+			       "%s: Not enough headroom for 802.2 headers %d\n",
+			       dev->name, skb_headroom(skb));
+			goto drop;
+		}
+		eh = (struct ethhdr *) skb_push(skb, sizeof(hdr));
+		memcpy(eh, &hdr, sizeof(hdr));
+	}
+
+	err = hermes_bap_pwrite(hw, USER_BAP, skb->data, skb->len,
+				txfid, HERMES_802_3_OFFSET);
+	if (err) {
+		printk(KERN_ERR "%s: Error %d writing packet to BAP\n",
+		       dev->name, err);
+		goto busy;
+	}
+
+	/* Calculate Michael MIC */
+	if (priv->encode_alg == IW_ENCODE_ALG_TKIP) {
+		u8 mic_buf[MICHAEL_MIC_LEN + 1];
+		u8 *mic;
+		size_t offset;
+		size_t len;
+
+		if (skb->len % 2) {
+			/* MIC start is on an odd boundary */
+			mic_buf[0] = skb->data[skb->len - 1];
+			mic = &mic_buf[1];
+			offset = skb->len - 1;
+			len = MICHAEL_MIC_LEN + 1;
+		} else {
+			mic = &mic_buf[0];
+			offset = skb->len;
+			len = MICHAEL_MIC_LEN;
+		}
+
+		michael_mic(priv->tx_tfm_mic,
+			    priv->tkip_key[priv->tx_key].tx_mic,
+			    eh->h_dest, eh->h_source, 0 /* priority */,
+			    skb->data + ETH_HLEN, skb->len - ETH_HLEN, mic);
+
+		/* Write the MIC */
+		err = hermes_bap_pwrite(hw, USER_BAP, &mic_buf[0], len,
+					txfid, HERMES_802_3_OFFSET + offset);
+		if (err) {
+			printk(KERN_ERR "%s: Error %d writing MIC to BAP\n",
+			       dev->name, err);
+			goto busy;
+		}
+	}
+
+	/* Finally, we actually initiate the send */
+	netif_stop_queue(dev);
+
+	err = hermes_docmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL,
+				txfid, NULL);
+	if (err) {
+		netif_start_queue(dev);
+		if (net_ratelimit())
+			printk(KERN_ERR "%s: Error %d transmitting packet\n",
+				dev->name, err);
+		goto busy;
+	}
+
+	dev->trans_start = jiffies;
+	stats->tx_bytes += HERMES_802_3_OFFSET + skb->len;
+	goto ok;
+
+ drop:
+	stats->tx_errors++;
+	stats->tx_dropped++;
+
+ ok:
+	orinoco_unlock(priv, &flags);
+	dev_kfree_skb(skb);
+	return NETDEV_TX_OK;
+
+ busy:
+	if (err == -EIO)
+		schedule_work(&priv->reset_work);
+	orinoco_unlock(priv, &flags);
+	return NETDEV_TX_BUSY;
+}
+
+static void __orinoco_ev_alloc(struct net_device *dev, hermes_t *hw)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	u16 fid = hermes_read_regn(hw, ALLOCFID);
+
+	if (fid != priv->txfid) {
+		if (fid != DUMMY_FID)
+			printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n",
+			       dev->name, fid);
+		return;
+	}
+
+	hermes_write_regn(hw, ALLOCFID, DUMMY_FID);
+}
+
+static void __orinoco_ev_tx(struct net_device *dev, hermes_t *hw)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct net_device_stats *stats = &priv->stats;
+
+	stats->tx_packets++;
+
+	netif_wake_queue(dev);
+
+	hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
+}
+
+static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct net_device_stats *stats = &priv->stats;
+	u16 fid = hermes_read_regn(hw, TXCOMPLFID);
+	u16 status;
+	struct hermes_txexc_data hdr;
+	int err = 0;
+
+	if (fid == DUMMY_FID)
+		return; /* Nothing's really happened */
+
+	/* Read part of the frame header - we need status and addr1 */
+	err = hermes_bap_pread(hw, IRQ_BAP, &hdr,
+			       sizeof(struct hermes_txexc_data),
+			       fid, 0);
+
+	hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
+	stats->tx_errors++;
+
+	if (err) {
+		printk(KERN_WARNING "%s: Unable to read descriptor on Tx error "
+		       "(FID=%04X error %d)\n",
+		       dev->name, fid, err);
+		return;
+	}
+	
+	DEBUG(1, "%s: Tx error, err %d (FID=%04X)\n", dev->name,
+	      err, fid);
+    
+	/* We produce a TXDROP event only for retry or lifetime
+	 * exceeded, because that's the only status that really mean
+	 * that this particular node went away.
+	 * Other errors means that *we* screwed up. - Jean II */
+	status = le16_to_cpu(hdr.desc.status);
+	if (status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) {
+		union iwreq_data	wrqu;
+
+		/* Copy 802.11 dest address.
+		 * We use the 802.11 header because the frame may
+		 * not be 802.3 or may be mangled...
+		 * In Ad-Hoc mode, it will be the node address.
+		 * In managed mode, it will be most likely the AP addr
+		 * User space will figure out how to convert it to
+		 * whatever it needs (IP address or else).
+		 * - Jean II */
+		memcpy(wrqu.addr.sa_data, hdr.addr1, ETH_ALEN);
+		wrqu.addr.sa_family = ARPHRD_ETHER;
+
+		/* Send event to user space */
+		wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL);
+	}
+
+	netif_wake_queue(dev);
+}
+
+static void orinoco_tx_timeout(struct net_device *dev)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct net_device_stats *stats = &priv->stats;
+	struct hermes *hw = &priv->hw;
+
+	printk(KERN_WARNING "%s: Tx timeout! "
+	       "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n",
+	       dev->name, hermes_read_regn(hw, ALLOCFID),
+	       hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT));
+
+	stats->tx_errors++;
+
+	schedule_work(&priv->reset_work);
+}
+
+/********************************************************************/
+/* Rx path (data frames)                                            */
+/********************************************************************/
+
+/* Does the frame have a SNAP header indicating it should be
+ * de-encapsulated to Ethernet-II? */
+static inline int is_ethersnap(void *_hdr)
+{
+	u8 *hdr = _hdr;
+
+	/* We de-encapsulate all packets which, a) have SNAP headers
+	 * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header
+	 * and where b) the OUI of the SNAP header is 00:00:00 or
+	 * 00:00:f8 - we need both because different APs appear to use
+	 * different OUIs for some reason */
+	return (memcmp(hdr, &encaps_hdr, 5) == 0)
+		&& ( (hdr[5] == 0x00) || (hdr[5] == 0xf8) );
+}
+
+static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac,
+				      int level, int noise)
+{
+	struct iw_quality wstats;
+	wstats.level = level - 0x95;
+	wstats.noise = noise - 0x95;
+	wstats.qual = (level > noise) ? (level - noise) : 0;
+	wstats.updated = 7;
+	/* Update spy records */
+	wireless_spy_update(dev, mac, &wstats);
+}
+
+static void orinoco_stat_gather(struct net_device *dev,
+				struct sk_buff *skb,
+				struct hermes_rx_descriptor *desc)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+
+	/* Using spy support with lots of Rx packets, like in an
+	 * infrastructure (AP), will really slow down everything, because
+	 * the MAC address must be compared to each entry of the spy list.
+	 * If the user really asks for it (set some address in the
+	 * spy list), we do it, but he will pay the price.
+	 * Note that to get here, you need both WIRELESS_SPY
+	 * compiled in AND some addresses in the list !!!
+	 */
+	/* Note : gcc will optimise the whole section away if
+	 * WIRELESS_SPY is not defined... - Jean II */
+	if (SPY_NUMBER(priv)) {
+		orinoco_spy_gather(dev, skb_mac_header(skb) + ETH_ALEN,
+				   desc->signal, desc->silence);
+	}
+}
+
+/*
+ * orinoco_rx_monitor - handle received monitor frames.
+ *
+ * Arguments:
+ *	dev		network device
+ *	rxfid		received FID
+ *	desc		rx descriptor of the frame
+ *
+ * Call context: interrupt
+ */
+static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid,
+			       struct hermes_rx_descriptor *desc)
+{
+	u32 hdrlen = 30;	/* return full header by default */
+	u32 datalen = 0;
+	u16 fc;
+	int err;
+	int len;
+	struct sk_buff *skb;
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct net_device_stats *stats = &priv->stats;
+	hermes_t *hw = &priv->hw;
+
+	len = le16_to_cpu(desc->data_len);
+
+	/* Determine the size of the header and the data */
+	fc = le16_to_cpu(desc->frame_ctl);
+	switch (fc & IEEE80211_FCTL_FTYPE) {
+	case IEEE80211_FTYPE_DATA:
+		if ((fc & IEEE80211_FCTL_TODS)
+		    && (fc & IEEE80211_FCTL_FROMDS))
+			hdrlen = 30;
+		else
+			hdrlen = 24;
+		datalen = len;
+		break;
+	case IEEE80211_FTYPE_MGMT:
+		hdrlen = 24;
+		datalen = len;
+		break;
+	case IEEE80211_FTYPE_CTL:
+		switch (fc & IEEE80211_FCTL_STYPE) {
+		case IEEE80211_STYPE_PSPOLL:
+		case IEEE80211_STYPE_RTS:
+		case IEEE80211_STYPE_CFEND:
+		case IEEE80211_STYPE_CFENDACK:
+			hdrlen = 16;
+			break;
+		case IEEE80211_STYPE_CTS:
+		case IEEE80211_STYPE_ACK:
+			hdrlen = 10;
+			break;
+		}
+		break;
+	default:
+		/* Unknown frame type */
+		break;
+	}
+
+	/* sanity check the length */
+	if (datalen > IEEE80211_MAX_DATA_LEN + 12) {
+		printk(KERN_DEBUG "%s: oversized monitor frame, "
+		       "data length = %d\n", dev->name, datalen);
+		stats->rx_length_errors++;
+		goto update_stats;
+	}
+
+	skb = dev_alloc_skb(hdrlen + datalen);
+	if (!skb) {
+		printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n",
+		       dev->name);
+		goto update_stats;
+	}
+
+	/* Copy the 802.11 header to the skb */
+	memcpy(skb_put(skb, hdrlen), &(desc->frame_ctl), hdrlen);
+	skb_reset_mac_header(skb);
+
+	/* If any, copy the data from the card to the skb */
+	if (datalen > 0) {
+		err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, datalen),
+				       ALIGN(datalen, 2), rxfid,
+				       HERMES_802_2_OFFSET);
+		if (err) {
+			printk(KERN_ERR "%s: error %d reading monitor frame\n",
+			       dev->name, err);
+			goto drop;
+		}
+	}
+
+	skb->dev = dev;
+	skb->ip_summed = CHECKSUM_NONE;
+	skb->pkt_type = PACKET_OTHERHOST;
+	skb->protocol = __constant_htons(ETH_P_802_2);
+	
+	stats->rx_packets++;
+	stats->rx_bytes += skb->len;
+
+	netif_rx(skb);
+	return;
+
+ drop:
+	dev_kfree_skb_irq(skb);
+ update_stats:
+	stats->rx_errors++;
+	stats->rx_dropped++;
+}
+
+/* Get tsc from the firmware */
+static int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key,
+				  u8 *tsc)
+{
+	hermes_t *hw = &priv->hw;
+	int err = 0;
+	u8 tsc_arr[4][IW_ENCODE_SEQ_MAX_SIZE];
+
+	if ((key < 0) || (key > 4))
+		return -EINVAL;
+
+	err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV,
+			      sizeof(tsc_arr), NULL, &tsc_arr);
+	if (!err)
+		memcpy(tsc, &tsc_arr[key][0], sizeof(tsc_arr[0]));
+
+	return err;
+}
+
+static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct net_device_stats *stats = &priv->stats;
+	struct iw_statistics *wstats = &priv->wstats;
+	struct sk_buff *skb = NULL;
+	u16 rxfid, status;
+	int length;
+	struct hermes_rx_descriptor *desc;
+	struct orinoco_rx_data *rx_data;
+	int err;
+
+	desc = kmalloc(sizeof(*desc), GFP_ATOMIC);
+	if (!desc) {
+		printk(KERN_WARNING
+		       "%s: Can't allocate space for RX descriptor\n",
+		       dev->name);
+		goto update_stats;
+	}
+
+	rxfid = hermes_read_regn(hw, RXFID);
+
+	err = hermes_bap_pread(hw, IRQ_BAP, desc, sizeof(*desc),
+			       rxfid, 0);
+	if (err) {
+		printk(KERN_ERR "%s: error %d reading Rx descriptor. "
+		       "Frame dropped.\n", dev->name, err);
+		goto update_stats;
+	}
+
+	status = le16_to_cpu(desc->status);
+
+	if (status & HERMES_RXSTAT_BADCRC) {
+		DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n",
+		      dev->name);
+		stats->rx_crc_errors++;
+		goto update_stats;
+	}
+
+	/* Handle frames in monitor mode */
+	if (priv->iw_mode == IW_MODE_MONITOR) {
+		orinoco_rx_monitor(dev, rxfid, desc);
+		goto out;
+	}
+
+	if (status & HERMES_RXSTAT_UNDECRYPTABLE) {
+		DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n",
+		      dev->name);
+		wstats->discard.code++;
+		goto update_stats;
+	}
+
+	length = le16_to_cpu(desc->data_len);
+
+	/* Sanity checks */
+	if (length < 3) { /* No for even an 802.2 LLC header */
+		/* At least on Symbol firmware with PCF we get quite a
+                   lot of these legitimately - Poll frames with no
+                   data. */
+		goto out;
+	}
+	if (length > IEEE80211_MAX_DATA_LEN) {
+		printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n",
+		       dev->name, length);
+		stats->rx_length_errors++;
+		goto update_stats;
+	}
+
+	/* Payload size does not include Michael MIC. Increase payload
+	 * size to read it together with the data. */
+	if (status & HERMES_RXSTAT_MIC)
+		length += MICHAEL_MIC_LEN;
+
+	/* We need space for the packet data itself, plus an ethernet
+	   header, plus 2 bytes so we can align the IP header on a
+	   32bit boundary, plus 1 byte so we can read in odd length
+	   packets from the card, which has an IO granularity of 16
+	   bits */  
+	skb = dev_alloc_skb(length+ETH_HLEN+2+1);
+	if (!skb) {
+		printk(KERN_WARNING "%s: Can't allocate skb for Rx\n",
+		       dev->name);
+		goto update_stats;
+	}
+
+	/* We'll prepend the header, so reserve space for it.  The worst
+	   case is no decapsulation, when 802.3 header is prepended and
+	   nothing is removed.  2 is for aligning the IP header.  */
+	skb_reserve(skb, ETH_HLEN + 2);
+
+	err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, length),
+			       ALIGN(length, 2), rxfid,
+			       HERMES_802_2_OFFSET);
+	if (err) {
+		printk(KERN_ERR "%s: error %d reading frame. "
+		       "Frame dropped.\n", dev->name, err);
+		goto drop;
+	}
+
+	/* Add desc and skb to rx queue */
+	rx_data = kzalloc(sizeof(*rx_data), GFP_ATOMIC);
+	if (!rx_data) {
+		printk(KERN_WARNING "%s: Can't allocate RX packet\n",
+			dev->name);
+		goto drop;
+	}
+	rx_data->desc = desc;
+	rx_data->skb = skb;
+	list_add_tail(&rx_data->list, &priv->rx_list);
+	tasklet_schedule(&priv->rx_tasklet);
+
+	return;
+
+drop:
+	dev_kfree_skb_irq(skb);
+update_stats:
+	stats->rx_errors++;
+	stats->rx_dropped++;
+out:
+	kfree(desc);
+}
+
+static void orinoco_rx(struct net_device *dev,
+		       struct hermes_rx_descriptor *desc,
+		       struct sk_buff *skb)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct net_device_stats *stats = &priv->stats;
+	u16 status, fc;
+	int length;
+	struct ethhdr *hdr;
+
+	status = le16_to_cpu(desc->status);
+	length = le16_to_cpu(desc->data_len);
+	fc = le16_to_cpu(desc->frame_ctl);
+
+	/* Calculate and check MIC */
+	if (status & HERMES_RXSTAT_MIC) {
+		int key_id = ((status & HERMES_RXSTAT_MIC_KEY_ID) >>
+			      HERMES_MIC_KEY_ID_SHIFT);
+		u8 mic[MICHAEL_MIC_LEN];
+		u8 *rxmic;
+		u8 *src = (fc & IEEE80211_FCTL_FROMDS) ?
+			desc->addr3 : desc->addr2;
+
+		/* Extract Michael MIC from payload */
+		rxmic = skb->data + skb->len - MICHAEL_MIC_LEN;
+
+		skb_trim(skb, skb->len - MICHAEL_MIC_LEN);
+		length -= MICHAEL_MIC_LEN;
+
+		michael_mic(priv->rx_tfm_mic,
+			    priv->tkip_key[key_id].rx_mic,
+			    desc->addr1,
+			    src,
+			    0, /* priority or QoS? */
+			    skb->data,
+			    skb->len,
+			    &mic[0]);
+
+		if (memcmp(mic, rxmic,
+			   MICHAEL_MIC_LEN)) {
+			union iwreq_data wrqu;
+			struct iw_michaelmicfailure wxmic;
+
+			printk(KERN_WARNING "%s: "
+			       "Invalid Michael MIC in data frame from %pM, "
+			       "using key %i\n",
+			       dev->name, src, key_id);
+
+			/* TODO: update stats */
+
+			/* Notify userspace */
+			memset(&wxmic, 0, sizeof(wxmic));
+			wxmic.flags = key_id & IW_MICFAILURE_KEY_ID;
+			wxmic.flags |= (desc->addr1[0] & 1) ?
+				IW_MICFAILURE_GROUP : IW_MICFAILURE_PAIRWISE;
+			wxmic.src_addr.sa_family = ARPHRD_ETHER;
+			memcpy(wxmic.src_addr.sa_data, src, ETH_ALEN);
+
+			(void) orinoco_hw_get_tkip_iv(priv, key_id,
+						      &wxmic.tsc[0]);
+
+			memset(&wrqu, 0, sizeof(wrqu));
+			wrqu.data.length = sizeof(wxmic);
+			wireless_send_event(dev, IWEVMICHAELMICFAILURE, &wrqu,
+					    (char *) &wxmic);
+
+			goto drop;
+		}
+	}
+
+	/* Handle decapsulation
+	 * In most cases, the firmware tell us about SNAP frames.
+	 * For some reason, the SNAP frames sent by LinkSys APs
+	 * are not properly recognised by most firmwares.
+	 * So, check ourselves */
+	if (length >= ENCAPS_OVERHEAD &&
+	    (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) ||
+	     ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) ||
+	     is_ethersnap(skb->data))) {
+		/* These indicate a SNAP within 802.2 LLC within
+		   802.11 frame which we'll need to de-encapsulate to
+		   the original EthernetII frame. */
+		hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN - ENCAPS_OVERHEAD);
+	} else {
+		/* 802.3 frame - prepend 802.3 header as is */
+		hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN);
+		hdr->h_proto = htons(length);
+	}
+	memcpy(hdr->h_dest, desc->addr1, ETH_ALEN);
+	if (fc & IEEE80211_FCTL_FROMDS)
+		memcpy(hdr->h_source, desc->addr3, ETH_ALEN);
+	else
+		memcpy(hdr->h_source, desc->addr2, ETH_ALEN);
+
+	skb->protocol = eth_type_trans(skb, dev);
+	skb->ip_summed = CHECKSUM_NONE;
+	if (fc & IEEE80211_FCTL_TODS)
+		skb->pkt_type = PACKET_OTHERHOST;
+	
+	/* Process the wireless stats if needed */
+	orinoco_stat_gather(dev, skb, desc);
+
+	/* Pass the packet to the networking stack */
+	netif_rx(skb);
+	stats->rx_packets++;
+	stats->rx_bytes += length;
+
+	return;
+
+ drop:
+	dev_kfree_skb(skb);
+	stats->rx_errors++;
+	stats->rx_dropped++;
+}
+
+static void orinoco_rx_isr_tasklet(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *) data;
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct orinoco_rx_data *rx_data, *temp;
+	struct hermes_rx_descriptor *desc;
+	struct sk_buff *skb;
+
+	/* extract desc and skb from queue */
+	list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) {
+		desc = rx_data->desc;
+		skb = rx_data->skb;
+		list_del(&rx_data->list);
+		kfree(rx_data);
+
+		orinoco_rx(dev, desc, skb);
+
+		kfree(desc);
+	}
+}
+
+/********************************************************************/
+/* Rx path (info frames)                                            */
+/********************************************************************/
+
+static void print_linkstatus(struct net_device *dev, u16 status)
+{
+	char * s;
+
+	if (suppress_linkstatus)
+		return;
+
+	switch (status) {
+	case HERMES_LINKSTATUS_NOT_CONNECTED:
+		s = "Not Connected";
+		break;
+	case HERMES_LINKSTATUS_CONNECTED:
+		s = "Connected";
+		break;
+	case HERMES_LINKSTATUS_DISCONNECTED:
+		s = "Disconnected";
+		break;
+	case HERMES_LINKSTATUS_AP_CHANGE:
+		s = "AP Changed";
+		break;
+	case HERMES_LINKSTATUS_AP_OUT_OF_RANGE:
+		s = "AP Out of Range";
+		break;
+	case HERMES_LINKSTATUS_AP_IN_RANGE:
+		s = "AP In Range";
+		break;
+	case HERMES_LINKSTATUS_ASSOC_FAILED:
+		s = "Association Failed";
+		break;
+	default:
+		s = "UNKNOWN";
+	}
+	
+	printk(KERN_INFO "%s: New link status: %s (%04x)\n",
+	       dev->name, s, status);
+}
+
+/* Search scan results for requested BSSID, join it if found */
+static void orinoco_join_ap(struct work_struct *work)
+{
+	struct orinoco_private *priv =
+		container_of(work, struct orinoco_private, join_work);
+	struct net_device *dev = priv->ndev;
+	struct hermes *hw = &priv->hw;
+	int err;
+	unsigned long flags;
+	struct join_req {
+		u8 bssid[ETH_ALEN];
+		__le16 channel;
+	} __attribute__ ((packed)) req;
+	const int atom_len = offsetof(struct prism2_scan_apinfo, atim);
+	struct prism2_scan_apinfo *atom = NULL;
+	int offset = 4;
+	int found = 0;
+	u8 *buf;
+	u16 len;
+
+	/* Allocate buffer for scan results */
+	buf = kmalloc(MAX_SCAN_LEN, GFP_KERNEL);
+	if (! buf)
+		return;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		goto fail_lock;
+
+	/* Sanity checks in case user changed something in the meantime */
+	if (! priv->bssid_fixed)
+		goto out;
+
+	if (strlen(priv->desired_essid) == 0)
+		goto out;
+
+	/* Read scan results from the firmware */
+	err = hermes_read_ltv(hw, USER_BAP,
+			      HERMES_RID_SCANRESULTSTABLE,
+			      MAX_SCAN_LEN, &len, buf);
+	if (err) {
+		printk(KERN_ERR "%s: Cannot read scan results\n",
+		       dev->name);
+		goto out;
+	}
+
+	len = HERMES_RECLEN_TO_BYTES(len);
+
+	/* Go through the scan results looking for the channel of the AP
+	 * we were requested to join */
+	for (; offset + atom_len <= len; offset += atom_len) {
+		atom = (struct prism2_scan_apinfo *) (buf + offset);
+		if (memcmp(&atom->bssid, priv->desired_bssid, ETH_ALEN) == 0) {
+			found = 1;
+			break;
+		}
+	}
+
+	if (! found) {
+		DEBUG(1, "%s: Requested AP not found in scan results\n",
+		      dev->name);
+		goto out;
+	}
+
+	memcpy(req.bssid, priv->desired_bssid, ETH_ALEN);
+	req.channel = atom->channel;	/* both are little-endian */
+	err = HERMES_WRITE_RECORD(hw, USER_BAP, HERMES_RID_CNFJOINREQUEST,
+				  &req);
+	if (err)
+		printk(KERN_ERR "%s: Error issuing join request\n", dev->name);
+
+ out:
+	orinoco_unlock(priv, &flags);
+
+ fail_lock:
+	kfree(buf);
+}
+
+/* Send new BSSID to userspace */
+static void orinoco_send_bssid_wevent(struct orinoco_private *priv)
+{
+	struct net_device *dev = priv->ndev;
+	struct hermes *hw = &priv->hw;
+	union iwreq_data wrqu;
+	int err;
+
+	err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENTBSSID,
+			      ETH_ALEN, NULL, wrqu.ap_addr.sa_data);
+	if (err != 0)
+		return;
+
+	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+
+	/* Send event to user space */
+	wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
+}
+
+static void orinoco_send_assocreqie_wevent(struct orinoco_private *priv)
+{
+	struct net_device *dev = priv->ndev;
+	struct hermes *hw = &priv->hw;
+	union iwreq_data wrqu;
+	int err;
+	u8 buf[88];
+	u8 *ie;
+
+	if (!priv->has_wpa)
+		return;
+
+	err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENT_ASSOC_REQ_INFO,
+			      sizeof(buf), NULL, &buf);
+	if (err != 0)
+		return;
+
+	ie = orinoco_get_wpa_ie(buf, sizeof(buf));
+	if (ie) {
+		int rem = sizeof(buf) - (ie - &buf[0]);
+		wrqu.data.length = ie[1] + 2;
+		if (wrqu.data.length > rem)
+			wrqu.data.length = rem;
+
+		if (wrqu.data.length)
+			/* Send event to user space */
+			wireless_send_event(dev, IWEVASSOCREQIE, &wrqu, ie);
+	}
+}
+
+static void orinoco_send_assocrespie_wevent(struct orinoco_private *priv)
+{
+	struct net_device *dev = priv->ndev;
+	struct hermes *hw = &priv->hw;
+	union iwreq_data wrqu;
+	int err;
+	u8 buf[88]; /* TODO: verify max size or IW_GENERIC_IE_MAX */
+	u8 *ie;
+
+	if (!priv->has_wpa)
+		return;
+
+	err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENT_ASSOC_RESP_INFO,
+			      sizeof(buf), NULL, &buf);
+	if (err != 0)
+		return;
+
+	ie = orinoco_get_wpa_ie(buf, sizeof(buf));
+	if (ie) {
+		int rem = sizeof(buf) - (ie - &buf[0]);
+		wrqu.data.length = ie[1] + 2;
+		if (wrqu.data.length > rem)
+			wrqu.data.length = rem;
+
+		if (wrqu.data.length)
+			/* Send event to user space */
+			wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu, ie);
+	}
+}
+
+static void orinoco_send_wevents(struct work_struct *work)
+{
+	struct orinoco_private *priv =
+		container_of(work, struct orinoco_private, wevent_work);
+	unsigned long flags;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return;
+
+	orinoco_send_assocreqie_wevent(priv);
+	orinoco_send_assocrespie_wevent(priv);
+	orinoco_send_bssid_wevent(priv);
+
+	orinoco_unlock(priv, &flags);
+}
+
+static inline void orinoco_clear_scan_results(struct orinoco_private *priv,
+					      unsigned long scan_age)
+{
+	if (priv->has_ext_scan) {
+		struct xbss_element *bss;
+		struct xbss_element *tmp_bss;
+
+		/* Blow away current list of scan results */
+		list_for_each_entry_safe(bss, tmp_bss, &priv->bss_list, list) {
+			if (!scan_age ||
+			    time_after(jiffies, bss->last_scanned + scan_age)) {
+				list_move_tail(&bss->list,
+					       &priv->bss_free_list);
+				/* Don't blow away ->list, just BSS data */
+				memset(&bss->bss, 0, sizeof(bss->bss));
+				bss->last_scanned = 0;
+			}
+		}
+	} else {
+		struct bss_element *bss;
+		struct bss_element *tmp_bss;
+
+		/* Blow away current list of scan results */
+		list_for_each_entry_safe(bss, tmp_bss, &priv->bss_list, list) {
+			if (!scan_age ||
+			    time_after(jiffies, bss->last_scanned + scan_age)) {
+				list_move_tail(&bss->list,
+					       &priv->bss_free_list);
+				/* Don't blow away ->list, just BSS data */
+				memset(&bss->bss, 0, sizeof(bss->bss));
+				bss->last_scanned = 0;
+			}
+		}
+	}
+}
+
+static void orinoco_add_ext_scan_result(struct orinoco_private *priv,
+					struct agere_ext_scan_info *atom)
+{
+	struct xbss_element *bss = NULL;
+	int found = 0;
+
+	/* Try to update an existing bss first */
+	list_for_each_entry(bss, &priv->bss_list, list) {
+		if (compare_ether_addr(bss->bss.bssid, atom->bssid))
+			continue;
+		/* ESSID lengths */
+		if (bss->bss.data[1] != atom->data[1])
+			continue;
+		if (memcmp(&bss->bss.data[2], &atom->data[2],
+			   atom->data[1]))
+			continue;
+		found = 1;
+		break;
+	}
+
+	/* Grab a bss off the free list */
+	if (!found && !list_empty(&priv->bss_free_list)) {
+		bss = list_entry(priv->bss_free_list.next,
+				 struct xbss_element, list);
+		list_del(priv->bss_free_list.next);
+
+		list_add_tail(&bss->list, &priv->bss_list);
+	}
+
+	if (bss) {
+		/* Always update the BSS to get latest beacon info */
+		memcpy(&bss->bss, atom, sizeof(bss->bss));
+		bss->last_scanned = jiffies;
+	}
+}
+
+static int orinoco_process_scan_results(struct net_device *dev,
+					unsigned char *buf,
+					int len)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	int			offset;		/* In the scan data */
+	union hermes_scan_info *atom;
+	int			atom_len;
+
+	switch (priv->firmware_type) {
+	case FIRMWARE_TYPE_AGERE:
+		atom_len = sizeof(struct agere_scan_apinfo);
+		offset = 0;
+		break;
+	case FIRMWARE_TYPE_SYMBOL:
+		/* Lack of documentation necessitates this hack.
+		 * Different firmwares have 68 or 76 byte long atoms.
+		 * We try modulo first.  If the length divides by both,
+		 * we check what would be the channel in the second
+		 * frame for a 68-byte atom.  76-byte atoms have 0 there.
+		 * Valid channel cannot be 0.  */
+		if (len % 76)
+			atom_len = 68;
+		else if (len % 68)
+			atom_len = 76;
+		else if (len >= 1292 && buf[68] == 0)
+			atom_len = 76;
+		else
+			atom_len = 68;
+		offset = 0;
+		break;
+	case FIRMWARE_TYPE_INTERSIL:
+		offset = 4;
+		if (priv->has_hostscan) {
+			atom_len = le16_to_cpup((__le16 *)buf);
+			/* Sanity check for atom_len */
+			if (atom_len < sizeof(struct prism2_scan_apinfo)) {
+				printk(KERN_ERR "%s: Invalid atom_len in scan "
+				       "data: %d\n", dev->name, atom_len);
+				return -EIO;
+			}
+		} else
+			atom_len = offsetof(struct prism2_scan_apinfo, atim);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	/* Check that we got an whole number of atoms */
+	if ((len - offset) % atom_len) {
+		printk(KERN_ERR "%s: Unexpected scan data length %d, "
+		       "atom_len %d, offset %d\n", dev->name, len,
+		       atom_len, offset);
+		return -EIO;
+	}
+
+	orinoco_clear_scan_results(priv, msecs_to_jiffies(15000));
+
+	/* Read the entries one by one */
+	for (; offset + atom_len <= len; offset += atom_len) {
+		int found = 0;
+		struct bss_element *bss = NULL;
+
+		/* Get next atom */
+		atom = (union hermes_scan_info *) (buf + offset);
+
+		/* Try to update an existing bss first */
+		list_for_each_entry(bss, &priv->bss_list, list) {
+			if (compare_ether_addr(bss->bss.a.bssid, atom->a.bssid))
+				continue;
+			if (le16_to_cpu(bss->bss.a.essid_len) !=
+			      le16_to_cpu(atom->a.essid_len))
+				continue;
+			if (memcmp(bss->bss.a.essid, atom->a.essid,
+			      le16_to_cpu(atom->a.essid_len)))
+				continue;
+			found = 1;
+			break;
+		}
+
+		/* Grab a bss off the free list */
+		if (!found && !list_empty(&priv->bss_free_list)) {
+			bss = list_entry(priv->bss_free_list.next,
+					 struct bss_element, list);
+			list_del(priv->bss_free_list.next);
+
+			list_add_tail(&bss->list, &priv->bss_list);
+		}
+
+		if (bss) {
+			/* Always update the BSS to get latest beacon info */
+			memcpy(&bss->bss, atom, sizeof(bss->bss));
+			bss->last_scanned = jiffies;
+		}
+	}
+
+	return 0;
+}
+
+static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	u16 infofid;
+	struct {
+		__le16 len;
+		__le16 type;
+	} __attribute__ ((packed)) info;
+	int len, type;
+	int err;
+
+	/* This is an answer to an INQUIRE command that we did earlier,
+	 * or an information "event" generated by the card
+	 * The controller return to us a pseudo frame containing
+	 * the information in question - Jean II */
+	infofid = hermes_read_regn(hw, INFOFID);
+
+	/* Read the info frame header - don't try too hard */
+	err = hermes_bap_pread(hw, IRQ_BAP, &info, sizeof(info),
+			       infofid, 0);
+	if (err) {
+		printk(KERN_ERR "%s: error %d reading info frame. "
+		       "Frame dropped.\n", dev->name, err);
+		return;
+	}
+	
+	len = HERMES_RECLEN_TO_BYTES(le16_to_cpu(info.len));
+	type = le16_to_cpu(info.type);
+
+	switch (type) {
+	case HERMES_INQ_TALLIES: {
+		struct hermes_tallies_frame tallies;
+		struct iw_statistics *wstats = &priv->wstats;
+		
+		if (len > sizeof(tallies)) {
+			printk(KERN_WARNING "%s: Tallies frame too long (%d bytes)\n",
+			       dev->name, len);
+			len = sizeof(tallies);
+		}
+		
+		err = hermes_bap_pread(hw, IRQ_BAP, &tallies, len,
+				       infofid, sizeof(info));
+		if (err)
+			break;
+		
+		/* Increment our various counters */
+		/* wstats->discard.nwid - no wrong BSSID stuff */
+		wstats->discard.code +=
+			le16_to_cpu(tallies.RxWEPUndecryptable);
+		if (len == sizeof(tallies))  
+			wstats->discard.code +=
+				le16_to_cpu(tallies.RxDiscards_WEPICVError) +
+				le16_to_cpu(tallies.RxDiscards_WEPExcluded);
+		wstats->discard.misc +=
+			le16_to_cpu(tallies.TxDiscardsWrongSA);
+		wstats->discard.fragment +=
+			le16_to_cpu(tallies.RxMsgInBadMsgFragments);
+		wstats->discard.retries +=
+			le16_to_cpu(tallies.TxRetryLimitExceeded);
+		/* wstats->miss.beacon - no match */
+	}
+	break;
+	case HERMES_INQ_LINKSTATUS: {
+		struct hermes_linkstatus linkstatus;
+		u16 newstatus;
+		int connected;
+
+		if (priv->iw_mode == IW_MODE_MONITOR)
+			break;
+
+		if (len != sizeof(linkstatus)) {
+			printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n",
+			       dev->name, len);
+			break;
+		}
+
+		err = hermes_bap_pread(hw, IRQ_BAP, &linkstatus, len,
+				       infofid, sizeof(info));
+		if (err)
+			break;
+		newstatus = le16_to_cpu(linkstatus.linkstatus);
+
+		/* Symbol firmware uses "out of range" to signal that
+		 * the hostscan frame can be requested.  */
+		if (newstatus == HERMES_LINKSTATUS_AP_OUT_OF_RANGE &&
+		    priv->firmware_type == FIRMWARE_TYPE_SYMBOL &&
+		    priv->has_hostscan && priv->scan_inprogress) {
+			hermes_inquire(hw, HERMES_INQ_HOSTSCAN_SYMBOL);
+			break;
+		}
+
+		connected = (newstatus == HERMES_LINKSTATUS_CONNECTED)
+			|| (newstatus == HERMES_LINKSTATUS_AP_CHANGE)
+			|| (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE);
+
+		if (connected)
+			netif_carrier_on(dev);
+		else if (!ignore_disconnect)
+			netif_carrier_off(dev);
+
+		if (newstatus != priv->last_linkstatus) {
+			priv->last_linkstatus = newstatus;
+			print_linkstatus(dev, newstatus);
+			/* The info frame contains only one word which is the
+			 * status (see hermes.h). The status is pretty boring
+			 * in itself, that's why we export the new BSSID...
+			 * Jean II */
+			schedule_work(&priv->wevent_work);
+		}
+	}
+	break;
+	case HERMES_INQ_SCAN:
+		if (!priv->scan_inprogress && priv->bssid_fixed &&
+		    priv->firmware_type == FIRMWARE_TYPE_INTERSIL) {
+			schedule_work(&priv->join_work);
+			break;
+		}
+		/* fall through */
+	case HERMES_INQ_HOSTSCAN:
+	case HERMES_INQ_HOSTSCAN_SYMBOL: {
+		/* Result of a scanning. Contains information about
+		 * cells in the vicinity - Jean II */
+		union iwreq_data	wrqu;
+		unsigned char *buf;
+
+		/* Scan is no longer in progress */
+		priv->scan_inprogress = 0;
+
+		/* Sanity check */
+		if (len > 4096) {
+			printk(KERN_WARNING "%s: Scan results too large (%d bytes)\n",
+			       dev->name, len);
+			break;
+		}
+
+		/* Allocate buffer for results */
+		buf = kmalloc(len, GFP_ATOMIC);
+		if (buf == NULL)
+			/* No memory, so can't printk()... */
+			break;
+
+		/* Read scan data */
+		err = hermes_bap_pread(hw, IRQ_BAP, (void *) buf, len,
+				       infofid, sizeof(info));
+		if (err) {
+			kfree(buf);
+			break;
+		}
+
+#ifdef ORINOCO_DEBUG
+		{
+			int	i;
+			printk(KERN_DEBUG "Scan result [%02X", buf[0]);
+			for(i = 1; i < (len * 2); i++)
+				printk(":%02X", buf[i]);
+			printk("]\n");
+		}
+#endif	/* ORINOCO_DEBUG */
+
+		if (orinoco_process_scan_results(dev, buf, len) == 0) {
+			/* Send an empty event to user space.
+			 * We don't send the received data on the event because
+			 * it would require us to do complex transcoding, and
+			 * we want to minimise the work done in the irq handler
+			 * Use a request to extract the data - Jean II */
+			wrqu.data.length = 0;
+			wrqu.data.flags = 0;
+			wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL);
+		}
+		kfree(buf);
+	}
+	break;
+	case HERMES_INQ_CHANNELINFO:
+	{
+		struct agere_ext_scan_info *bss;
+
+		if (!priv->scan_inprogress) {
+			printk(KERN_DEBUG "%s: Got chaninfo without scan, "
+			       "len=%d\n", dev->name, len);
+			break;
+		}
+
+		/* An empty result indicates that the scan is complete */
+		if (len == 0) {
+			union iwreq_data	wrqu;
+
+			/* Scan is no longer in progress */
+			priv->scan_inprogress = 0;
+
+			wrqu.data.length = 0;
+			wrqu.data.flags = 0;
+			wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL);
+			break;
+		}
+
+		/* Sanity check */
+		else if (len > sizeof(*bss)) {
+			printk(KERN_WARNING
+			       "%s: Ext scan results too large (%d bytes). "
+			       "Truncating results to %zd bytes.\n",
+			       dev->name, len, sizeof(*bss));
+			len = sizeof(*bss);
+		} else if (len < (offsetof(struct agere_ext_scan_info,
+					   data) + 2)) {
+			/* Drop this result now so we don't have to
+			 * keep checking later */
+			printk(KERN_WARNING
+			       "%s: Ext scan results too short (%d bytes)\n",
+			       dev->name, len);
+			break;
+		}
+
+		bss = kmalloc(sizeof(*bss), GFP_ATOMIC);
+		if (bss == NULL)
+			break;
+
+		/* Read scan data */
+		err = hermes_bap_pread(hw, IRQ_BAP, (void *) bss, len,
+				       infofid, sizeof(info));
+		if (err) {
+			kfree(bss);
+			break;
+		}
+
+		orinoco_add_ext_scan_result(priv, bss);
+
+		kfree(bss);
+		break;
+	}
+	case HERMES_INQ_SEC_STAT_AGERE:
+		/* Security status (Agere specific) */
+		/* Ignore this frame for now */
+		if (priv->firmware_type == FIRMWARE_TYPE_AGERE)
+			break;
+		/* fall through */
+	default:
+		printk(KERN_DEBUG "%s: Unknown information frame received: "
+		       "type 0x%04x, length %d\n", dev->name, type, len);
+		/* We don't actually do anything about it */
+		break;
+	}
+}
+
+static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw)
+{
+	if (net_ratelimit())
+		printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name);
+}
+
+/********************************************************************/
+/* Internal hardware control routines                               */
+/********************************************************************/
+
+int __orinoco_up(struct net_device *dev)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct hermes *hw = &priv->hw;
+	int err;
+
+	netif_carrier_off(dev); /* just to make sure */
+
+	err = __orinoco_program_rids(dev);
+	if (err) {
+		printk(KERN_ERR "%s: Error %d configuring card\n",
+		       dev->name, err);
+		return err;
+	}
+
+	/* Fire things up again */
+	hermes_set_irqmask(hw, ORINOCO_INTEN);
+	err = hermes_enable_port(hw, 0);
+	if (err) {
+		printk(KERN_ERR "%s: Error %d enabling MAC port\n",
+		       dev->name, err);
+		return err;
+	}
+
+	netif_start_queue(dev);
+
+	return 0;
+}
+
+int __orinoco_down(struct net_device *dev)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct hermes *hw = &priv->hw;
+	int err;
+
+	netif_stop_queue(dev);
+
+	if (! priv->hw_unavailable) {
+		if (! priv->broken_disableport) {
+			err = hermes_disable_port(hw, 0);
+			if (err) {
+				/* Some firmwares (e.g. Intersil 1.3.x) seem
+				 * to have problems disabling the port, oh
+				 * well, too bad. */
+				printk(KERN_WARNING "%s: Error %d disabling MAC port\n",
+				       dev->name, err);
+				priv->broken_disableport = 1;
+			}
+		}
+		hermes_set_irqmask(hw, 0);
+		hermes_write_regn(hw, EVACK, 0xffff);
+	}
+	
+	/* firmware will have to reassociate */
+	netif_carrier_off(dev);
+	priv->last_linkstatus = 0xffff;
+
+	return 0;
+}
+
+static int orinoco_allocate_fid(struct net_device *dev)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct hermes *hw = &priv->hw;
+	int err;
+
+	err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
+	if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) {
+		/* Try workaround for old Symbol firmware bug */
+		printk(KERN_WARNING "%s: firmware ALLOC bug detected "
+		       "(old Symbol firmware?). Trying to work around... ",
+		       dev->name);
+		
+		priv->nicbuf_size = TX_NICBUF_SIZE_BUG;
+		err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
+		if (err)
+			printk("failed!\n");
+		else
+			printk("ok.\n");
+	}
+
+	return err;
+}
+
+int orinoco_reinit_firmware(struct net_device *dev)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct hermes *hw = &priv->hw;
+	int err;
+
+	err = hermes_init(hw);
+	if (priv->do_fw_download && !err) {
+		err = orinoco_download(priv);
+		if (err)
+			priv->do_fw_download = 0;
+	}
+	if (!err)
+		err = orinoco_allocate_fid(dev);
+
+	return err;
+}
+
+static int __orinoco_hw_set_bitrate(struct orinoco_private *priv)
+{
+	hermes_t *hw = &priv->hw;
+	int err = 0;
+
+	if (priv->bitratemode >= BITRATE_TABLE_SIZE) {
+		printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n",
+		       priv->ndev->name, priv->bitratemode);
+		return -EINVAL;
+	}
+
+	switch (priv->firmware_type) {
+	case FIRMWARE_TYPE_AGERE:
+		err = hermes_write_wordrec(hw, USER_BAP,
+					   HERMES_RID_CNFTXRATECONTROL,
+					   bitrate_table[priv->bitratemode].agere_txratectrl);
+		break;
+	case FIRMWARE_TYPE_INTERSIL:
+	case FIRMWARE_TYPE_SYMBOL:
+		err = hermes_write_wordrec(hw, USER_BAP,
+					   HERMES_RID_CNFTXRATECONTROL,
+					   bitrate_table[priv->bitratemode].intersil_txratectrl);
+		break;
+	default:
+		BUG();
+	}
+
+	return err;
+}
+
+/* Set fixed AP address */
+static int __orinoco_hw_set_wap(struct orinoco_private *priv)
+{
+	int roaming_flag;
+	int err = 0;
+	hermes_t *hw = &priv->hw;
+
+	switch (priv->firmware_type) {
+	case FIRMWARE_TYPE_AGERE:
+		/* not supported */
+		break;
+	case FIRMWARE_TYPE_INTERSIL:
+		if (priv->bssid_fixed)
+			roaming_flag = 2;
+		else
+			roaming_flag = 1;
+
+		err = hermes_write_wordrec(hw, USER_BAP,
+					   HERMES_RID_CNFROAMINGMODE,
+					   roaming_flag);
+		break;
+	case FIRMWARE_TYPE_SYMBOL:
+		err = HERMES_WRITE_RECORD(hw, USER_BAP,
+					  HERMES_RID_CNFMANDATORYBSSID_SYMBOL,
+					  &priv->desired_bssid);
+		break;
+	}
+	return err;
+}
+
+/* Change the WEP keys and/or the current keys.  Can be called
+ * either from __orinoco_hw_setup_enc() or directly from
+ * orinoco_ioctl_setiwencode().  In the later case the association
+ * with the AP is not broken (if the firmware can handle it),
+ * which is needed for 802.1x implementations. */
+static int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv)
+{
+	hermes_t *hw = &priv->hw;
+	int err = 0;
+
+	switch (priv->firmware_type) {
+	case FIRMWARE_TYPE_AGERE:
+		err = HERMES_WRITE_RECORD(hw, USER_BAP,
+					  HERMES_RID_CNFWEPKEYS_AGERE,
+					  &priv->keys);
+		if (err)
+			return err;
+		err = hermes_write_wordrec(hw, USER_BAP,
+					   HERMES_RID_CNFTXKEY_AGERE,
+					   priv->tx_key);
+		if (err)
+			return err;
+		break;
+	case FIRMWARE_TYPE_INTERSIL:
+	case FIRMWARE_TYPE_SYMBOL:
+		{
+			int keylen;
+			int i;
+
+			/* Force uniform key length to work around firmware bugs */
+			keylen = le16_to_cpu(priv->keys[priv->tx_key].len);
+			
+			if (keylen > LARGE_KEY_SIZE) {
+				printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n",
+				       priv->ndev->name, priv->tx_key, keylen);
+				return -E2BIG;
+			}
+
+			/* Write all 4 keys */
+			for(i = 0; i < ORINOCO_MAX_KEYS; i++) {
+				err = hermes_write_ltv(hw, USER_BAP,
+						       HERMES_RID_CNFDEFAULTKEY0 + i,
+						       HERMES_BYTES_TO_RECLEN(keylen),
+						       priv->keys[i].data);
+				if (err)
+					return err;
+			}
+
+			/* Write the index of the key used in transmission */
+			err = hermes_write_wordrec(hw, USER_BAP,
+						   HERMES_RID_CNFWEPDEFAULTKEYID,
+						   priv->tx_key);
+			if (err)
+				return err;
+		}
+		break;
+	}
+
+	return 0;
+}
+
+static int __orinoco_hw_setup_enc(struct orinoco_private *priv)
+{
+	hermes_t *hw = &priv->hw;
+	int err = 0;
+	int master_wep_flag;
+	int auth_flag;
+	int enc_flag;
+
+	/* Setup WEP keys for WEP and WPA */
+	if (priv->encode_alg)
+		__orinoco_hw_setup_wepkeys(priv);
+
+	if (priv->wep_restrict)
+		auth_flag = HERMES_AUTH_SHARED_KEY;
+	else
+		auth_flag = HERMES_AUTH_OPEN;
+
+	if (priv->wpa_enabled)
+		enc_flag = 2;
+	else if (priv->encode_alg == IW_ENCODE_ALG_WEP)
+		enc_flag = 1;
+	else
+		enc_flag = 0;
+
+	switch (priv->firmware_type) {
+	case FIRMWARE_TYPE_AGERE: /* Agere style WEP */
+		if (priv->encode_alg == IW_ENCODE_ALG_WEP) {
+			/* Enable the shared-key authentication. */
+			err = hermes_write_wordrec(hw, USER_BAP,
+						   HERMES_RID_CNFAUTHENTICATION_AGERE,
+						   auth_flag);
+		}
+		err = hermes_write_wordrec(hw, USER_BAP,
+					   HERMES_RID_CNFWEPENABLED_AGERE,
+					   enc_flag);
+		if (err)
+			return err;
+
+		if (priv->has_wpa) {
+			/* Set WPA key management */
+			err = hermes_write_wordrec(hw, USER_BAP,
+				  HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE,
+				  priv->key_mgmt);
+			if (err)
+				return err;
+		}
+
+		break;
+
+	case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */
+	case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */
+		if (priv->encode_alg == IW_ENCODE_ALG_WEP) {
+			if (priv->wep_restrict ||
+			    (priv->firmware_type == FIRMWARE_TYPE_SYMBOL))
+				master_wep_flag = HERMES_WEP_PRIVACY_INVOKED |
+						  HERMES_WEP_EXCL_UNENCRYPTED;
+			else
+				master_wep_flag = HERMES_WEP_PRIVACY_INVOKED;
+
+			err = hermes_write_wordrec(hw, USER_BAP,
+						   HERMES_RID_CNFAUTHENTICATION,
+						   auth_flag);
+			if (err)
+				return err;
+		} else
+			master_wep_flag = 0;
+
+		if (priv->iw_mode == IW_MODE_MONITOR)
+			master_wep_flag |= HERMES_WEP_HOST_DECRYPT;
+
+		/* Master WEP setting : on/off */
+		err = hermes_write_wordrec(hw, USER_BAP,
+					   HERMES_RID_CNFWEPFLAGS_INTERSIL,
+					   master_wep_flag);
+		if (err)
+			return err;	
+
+		break;
+	}
+
+	return 0;
+}
+
+/* key must be 32 bytes, including the tx and rx MIC keys.
+ * rsc must be 8 bytes
+ * tsc must be 8 bytes or NULL
+ */
+static int __orinoco_hw_set_tkip_key(hermes_t *hw, int key_idx, int set_tx,
+				     u8 *key, u8 *rsc, u8 *tsc)
+{
+	struct {
+		__le16 idx;
+		u8 rsc[IW_ENCODE_SEQ_MAX_SIZE];
+		u8 key[TKIP_KEYLEN];
+		u8 tx_mic[MIC_KEYLEN];
+		u8 rx_mic[MIC_KEYLEN];
+		u8 tsc[IW_ENCODE_SEQ_MAX_SIZE];
+	} __attribute__ ((packed)) buf;
+	int ret;
+	int err;
+	int k;
+	u16 xmitting;
+
+	key_idx &= 0x3;
+
+	if (set_tx)
+		key_idx |= 0x8000;
+
+	buf.idx = cpu_to_le16(key_idx);
+	memcpy(buf.key, key,
+	       sizeof(buf.key) + sizeof(buf.tx_mic) + sizeof(buf.rx_mic));
+
+	if (rsc == NULL)
+		memset(buf.rsc, 0, sizeof(buf.rsc));
+	else
+		memcpy(buf.rsc, rsc, sizeof(buf.rsc));
+
+	if (tsc == NULL) {
+		memset(buf.tsc, 0, sizeof(buf.tsc));
+		buf.tsc[4] = 0x10;
+	} else {
+		memcpy(buf.tsc, tsc, sizeof(buf.tsc));
+	}
+
+	/* Wait upto 100ms for tx queue to empty */
+	k = 100;
+	do {
+		k--;
+		udelay(1000);
+		ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY,
+					  &xmitting);
+		if (ret)
+			break;
+	} while ((k > 0) && xmitting);
+
+	if (k == 0)
+		ret = -ETIMEDOUT;
+
+	err = HERMES_WRITE_RECORD(hw, USER_BAP,
+				  HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE,
+				  &buf);
+
+	return ret ? ret : err;
+}
+
+static int orinoco_clear_tkip_key(struct orinoco_private *priv,
+				  int key_idx)
+{
+	hermes_t *hw = &priv->hw;
+	int err;
+
+	memset(&priv->tkip_key[key_idx], 0, sizeof(priv->tkip_key[key_idx]));
+	err = hermes_write_wordrec(hw, USER_BAP,
+				   HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE,
+				   key_idx);
+	if (err)
+		printk(KERN_WARNING "%s: Error %d clearing TKIP key %d\n",
+		       priv->ndev->name, err, key_idx);
+	return err;
+}
+
+static int __orinoco_program_rids(struct net_device *dev)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	hermes_t *hw = &priv->hw;
+	int err;
+	struct hermes_idstring idbuf;
+
+	/* Set the MAC address */
+	err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
+			       HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr);
+	if (err) {
+		printk(KERN_ERR "%s: Error %d setting MAC address\n",
+		       dev->name, err);
+		return err;
+	}
+
+	/* Set up the link mode */
+	err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE,
+				   priv->port_type);
+	if (err) {
+		printk(KERN_ERR "%s: Error %d setting port type\n",
+		       dev->name, err);
+		return err;
+	}
+	/* Set the channel/frequency */
+	if (priv->channel != 0 && priv->iw_mode != IW_MODE_INFRA) {
+		err = hermes_write_wordrec(hw, USER_BAP,
+					   HERMES_RID_CNFOWNCHANNEL,
+					   priv->channel);
+		if (err) {
+			printk(KERN_ERR "%s: Error %d setting channel %d\n",
+			       dev->name, err, priv->channel);
+			return err;
+		}
+	}
+
+	if (priv->has_ibss) {
+		u16 createibss;
+
+		if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) {
+			printk(KERN_WARNING "%s: This firmware requires an "
+			       "ESSID in IBSS-Ad-Hoc mode.\n", dev->name);
+			/* With wvlan_cs, in this case, we would crash.
+			 * hopefully, this driver will behave better...
+			 * Jean II */
+			createibss = 0;
+		} else {
+			createibss = priv->createibss;
+		}
+		
+		err = hermes_write_wordrec(hw, USER_BAP,
+					   HERMES_RID_CNFCREATEIBSS,
+					   createibss);
+		if (err) {
+			printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n",
+			       dev->name, err);
+			return err;
+		}
+	}
+
+	/* Set the desired BSSID */
+	err = __orinoco_hw_set_wap(priv);
+	if (err) {
+		printk(KERN_ERR "%s: Error %d setting AP address\n",
+		       dev->name, err);
+		return err;
+	}
+	/* Set the desired ESSID */
+	idbuf.len = cpu_to_le16(strlen(priv->desired_essid));
+	memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val));
+	/* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */
+	err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID,
+			       HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
+			       &idbuf);
+	if (err) {
+		printk(KERN_ERR "%s: Error %d setting OWNSSID\n",
+		       dev->name, err);
+		return err;
+	}
+	err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID,
+			       HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
+			       &idbuf);
+	if (err) {
+		printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n",
+		       dev->name, err);
+		return err;
+	}
+
+	/* Set the station name */
+	idbuf.len = cpu_to_le16(strlen(priv->nick));
+	memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val));
+	err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
+			       HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2),
+			       &idbuf);
+	if (err) {
+		printk(KERN_ERR "%s: Error %d setting nickname\n",
+		       dev->name, err);
+		return err;
+	}
+
+	/* Set AP density */
+	if (priv->has_sensitivity) {
+		err = hermes_write_wordrec(hw, USER_BAP,
+					   HERMES_RID_CNFSYSTEMSCALE,
+					   priv->ap_density);
+		if (err) {
+			printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE.  "
+			       "Disabling sensitivity control\n",
+			       dev->name, err);
+
+			priv->has_sensitivity = 0;
+		}
+	}
+
+	/* Set RTS threshold */
+	err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
+				   priv->rts_thresh);
+	if (err) {
+		printk(KERN_ERR "%s: Error %d setting RTS threshold\n",
+		       dev->name, err);
+		return err;
+	}
+
+	/* Set fragmentation threshold or MWO robustness */
+	if (priv->has_mwo)
+		err = hermes_write_wordrec(hw, USER_BAP,
+					   HERMES_RID_CNFMWOROBUST_AGERE,
+					   priv->mwo_robust);
+	else
+		err = hermes_write_wordrec(hw, USER_BAP,
+					   HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
+					   priv->frag_thresh);
+	if (err) {
+		printk(KERN_ERR "%s: Error %d setting fragmentation\n",
+		       dev->name, err);
+		return err;
+	}
+
+	/* Set bitrate */
+	err = __orinoco_hw_set_bitrate(priv);
+	if (err) {
+		printk(KERN_ERR "%s: Error %d setting bitrate\n",
+		       dev->name, err);
+		return err;
+	}
+
+	/* Set power management */
+	if (priv->has_pm) {
+		err = hermes_write_wordrec(hw, USER_BAP,
+					   HERMES_RID_CNFPMENABLED,
+					   priv->pm_on);
+		if (err) {
+			printk(KERN_ERR "%s: Error %d setting up PM\n",
+			       dev->name, err);
+			return err;
+		}
+
+		err = hermes_write_wordrec(hw, USER_BAP,
+					   HERMES_RID_CNFMULTICASTRECEIVE,
+					   priv->pm_mcast);
+		if (err) {
+			printk(KERN_ERR "%s: Error %d setting up PM\n",
+			       dev->name, err);
+			return err;
+		}
+		err = hermes_write_wordrec(hw, USER_BAP,
+					   HERMES_RID_CNFMAXSLEEPDURATION,
+					   priv->pm_period);
+		if (err) {
+			printk(KERN_ERR "%s: Error %d setting up PM\n",
+			       dev->name, err);
+			return err;
+		}
+		err = hermes_write_wordrec(hw, USER_BAP,
+					   HERMES_RID_CNFPMHOLDOVERDURATION,
+					   priv->pm_timeout);
+		if (err) {
+			printk(KERN_ERR "%s: Error %d setting up PM\n",
+			       dev->name, err);
+			return err;
+		}
+	}
+
+	/* Set preamble - only for Symbol so far... */
+	if (priv->has_preamble) {
+		err = hermes_write_wordrec(hw, USER_BAP,
+					   HERMES_RID_CNFPREAMBLE_SYMBOL,
+					   priv->preamble);
+		if (err) {
+			printk(KERN_ERR "%s: Error %d setting preamble\n",
+			       dev->name, err);
+			return err;
+		}
+	}
+
+	/* Set up encryption */
+	if (priv->has_wep || priv->has_wpa) {
+		err = __orinoco_hw_setup_enc(priv);
+		if (err) {
+			printk(KERN_ERR "%s: Error %d activating encryption\n",
+			       dev->name, err);
+			return err;
+		}
+	}
+
+	if (priv->iw_mode == IW_MODE_MONITOR) {
+		/* Enable monitor mode */
+		dev->type = ARPHRD_IEEE80211;
+		err = hermes_docmd_wait(hw, HERMES_CMD_TEST | 
+					    HERMES_TEST_MONITOR, 0, NULL);
+	} else {
+		/* Disable monitor mode */
+		dev->type = ARPHRD_ETHER;
+		err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
+					    HERMES_TEST_STOP, 0, NULL);
+	}
+	if (err)
+		return err;
+
+	/* Set promiscuity / multicast*/
+	priv->promiscuous = 0;
+	priv->mc_count = 0;
+
+	/* FIXME: what about netif_tx_lock */
+	__orinoco_set_multicast_list(dev);
+
+	return 0;
+}
+
+/* FIXME: return int? */
+static void
+__orinoco_set_multicast_list(struct net_device *dev)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	hermes_t *hw = &priv->hw;
+	int err = 0;
+	int promisc, mc_count;
+
+	/* The Hermes doesn't seem to have an allmulti mode, so we go
+	 * into promiscuous mode and let the upper levels deal. */
+	if ( (dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) ||
+	     (dev->mc_count > MAX_MULTICAST(priv)) ) {
+		promisc = 1;
+		mc_count = 0;
+	} else {
+		promisc = 0;
+		mc_count = dev->mc_count;
+	}
+
+	if (promisc != priv->promiscuous) {
+		err = hermes_write_wordrec(hw, USER_BAP,
+					   HERMES_RID_CNFPROMISCUOUSMODE,
+					   promisc);
+		if (err) {
+			printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n",
+			       dev->name, err);
+		} else 
+			priv->promiscuous = promisc;
+	}
+
+	/* If we're not in promiscuous mode, then we need to set the
+	 * group address if either we want to multicast, or if we were
+	 * multicasting and want to stop */
+	if (! promisc && (mc_count || priv->mc_count) ) {
+		struct dev_mc_list *p = dev->mc_list;
+		struct hermes_multicast mclist;
+		int i;
+
+		for (i = 0; i < mc_count; i++) {
+			/* paranoia: is list shorter than mc_count? */
+			BUG_ON(! p);
+			/* paranoia: bad address size in list? */
+			BUG_ON(p->dmi_addrlen != ETH_ALEN);
+			
+			memcpy(mclist.addr[i], p->dmi_addr, ETH_ALEN);
+			p = p->next;
+		}
+		
+		if (p)
+			printk(KERN_WARNING "%s: Multicast list is "
+			       "longer than mc_count\n", dev->name);
+
+		err = hermes_write_ltv(hw, USER_BAP,
+				   HERMES_RID_CNFGROUPADDRESSES,
+				   HERMES_BYTES_TO_RECLEN(mc_count * ETH_ALEN),
+				   &mclist);
+		if (err)
+			printk(KERN_ERR "%s: Error %d setting multicast list.\n",
+			       dev->name, err);
+		else
+			priv->mc_count = mc_count;
+	}
+}
+
+/* This must be called from user context, without locks held - use
+ * schedule_work() */
+static void orinoco_reset(struct work_struct *work)
+{
+	struct orinoco_private *priv =
+		container_of(work, struct orinoco_private, reset_work);
+	struct net_device *dev = priv->ndev;
+	struct hermes *hw = &priv->hw;
+	int err;
+	unsigned long flags;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		/* When the hardware becomes available again, whatever
+		 * detects that is responsible for re-initializing
+		 * it. So no need for anything further */
+		return;
+
+	netif_stop_queue(dev);
+
+	/* Shut off interrupts.  Depending on what state the hardware
+	 * is in, this might not work, but we'll try anyway */
+	hermes_set_irqmask(hw, 0);
+	hermes_write_regn(hw, EVACK, 0xffff);
+
+	priv->hw_unavailable++;
+	priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */
+	netif_carrier_off(dev);
+
+	orinoco_unlock(priv, &flags);
+
+ 	/* Scanning support: Cleanup of driver struct */
+	orinoco_clear_scan_results(priv, 0);
+	priv->scan_inprogress = 0;
+
+	if (priv->hard_reset) {
+		err = (*priv->hard_reset)(priv);
+		if (err) {
+			printk(KERN_ERR "%s: orinoco_reset: Error %d "
+			       "performing hard reset\n", dev->name, err);
+			goto disable;
+		}
+	}
+
+	err = orinoco_reinit_firmware(dev);
+	if (err) {
+		printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n",
+		       dev->name, err);
+		goto disable;
+	}
+
+	spin_lock_irq(&priv->lock); /* This has to be called from user context */
+
+	priv->hw_unavailable--;
+
+	/* priv->open or priv->hw_unavailable might have changed while
+	 * we dropped the lock */
+	if (priv->open && (! priv->hw_unavailable)) {
+		err = __orinoco_up(dev);
+		if (err) {
+			printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n",
+			       dev->name, err);
+		} else
+			dev->trans_start = jiffies;
+	}
+
+	spin_unlock_irq(&priv->lock);
+
+	return;
+ disable:
+	hermes_set_irqmask(hw, 0);
+	netif_device_detach(dev);
+	printk(KERN_ERR "%s: Device has been disabled!\n", dev->name);
+}
+
+/********************************************************************/
+/* Interrupt handler                                                */
+/********************************************************************/
+
+static void __orinoco_ev_tick(struct net_device *dev, hermes_t *hw)
+{
+	printk(KERN_DEBUG "%s: TICK\n", dev->name);
+}
+
+static void __orinoco_ev_wterr(struct net_device *dev, hermes_t *hw)
+{
+	/* This seems to happen a fair bit under load, but ignoring it
+	   seems to work fine...*/
+	printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n",
+	       dev->name);
+}
+
+irqreturn_t orinoco_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct orinoco_private *priv = netdev_priv(dev);
+	hermes_t *hw = &priv->hw;
+	int count = MAX_IRQLOOPS_PER_IRQ;
+	u16 evstat, events;
+	/* These are used to detect a runaway interrupt situation */
+	/* If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy,
+	 * we panic and shut down the hardware */
+	static int last_irq_jiffy = 0; /* jiffies value the last time
+					* we were called */
+	static int loops_this_jiffy = 0;
+	unsigned long flags;
+
+	if (orinoco_lock(priv, &flags) != 0) {
+		/* If hw is unavailable - we don't know if the irq was
+		 * for us or not */
+		return IRQ_HANDLED;
+	}
+
+	evstat = hermes_read_regn(hw, EVSTAT);
+	events = evstat & hw->inten;
+	if (! events) {
+		orinoco_unlock(priv, &flags);
+		return IRQ_NONE;
+	}
+	
+	if (jiffies != last_irq_jiffy)
+		loops_this_jiffy = 0;
+	last_irq_jiffy = jiffies;
+
+	while (events && count--) {
+		if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) {
+			printk(KERN_WARNING "%s: IRQ handler is looping too "
+			       "much! Resetting.\n", dev->name);
+			/* Disable interrupts for now */
+			hermes_set_irqmask(hw, 0);
+			schedule_work(&priv->reset_work);
+			break;
+		}
+
+		/* Check the card hasn't been removed */
+		if (! hermes_present(hw)) {
+			DEBUG(0, "orinoco_interrupt(): card removed\n");
+			break;
+		}
+
+		if (events & HERMES_EV_TICK)
+			__orinoco_ev_tick(dev, hw);
+		if (events & HERMES_EV_WTERR)
+			__orinoco_ev_wterr(dev, hw);
+		if (events & HERMES_EV_INFDROP)
+			__orinoco_ev_infdrop(dev, hw);
+		if (events & HERMES_EV_INFO)
+			__orinoco_ev_info(dev, hw);
+		if (events & HERMES_EV_RX)
+			__orinoco_ev_rx(dev, hw);
+		if (events & HERMES_EV_TXEXC)
+			__orinoco_ev_txexc(dev, hw);
+		if (events & HERMES_EV_TX)
+			__orinoco_ev_tx(dev, hw);
+		if (events & HERMES_EV_ALLOC)
+			__orinoco_ev_alloc(dev, hw);
+		
+		hermes_write_regn(hw, EVACK, evstat);
+
+		evstat = hermes_read_regn(hw, EVSTAT);
+		events = evstat & hw->inten;
+	};
+
+	orinoco_unlock(priv, &flags);
+	return IRQ_HANDLED;
+}
+
+/********************************************************************/
+/* Initialization                                                   */
+/********************************************************************/
+
+struct comp_id {
+	u16 id, variant, major, minor;
+} __attribute__ ((packed));
+
+static inline fwtype_t determine_firmware_type(struct comp_id *nic_id)
+{
+	if (nic_id->id < 0x8000)
+		return FIRMWARE_TYPE_AGERE;
+	else if (nic_id->id == 0x8000 && nic_id->major == 0)
+		return FIRMWARE_TYPE_SYMBOL;
+	else
+		return FIRMWARE_TYPE_INTERSIL;
+}
+
+/* Set priv->firmware type, determine firmware properties */
+static int determine_firmware(struct net_device *dev)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	hermes_t *hw = &priv->hw;
+	int err;
+	struct comp_id nic_id, sta_id;
+	unsigned int firmver;
+	char tmp[SYMBOL_MAX_VER_LEN+1] __attribute__((aligned(2)));
+
+	/* Get the hardware version */
+	err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id);
+	if (err) {
+		printk(KERN_ERR "%s: Cannot read hardware identity: error %d\n",
+		       dev->name, err);
+		return err;
+	}
+
+	le16_to_cpus(&nic_id.id);
+	le16_to_cpus(&nic_id.variant);
+	le16_to_cpus(&nic_id.major);
+	le16_to_cpus(&nic_id.minor);
+	printk(KERN_DEBUG "%s: Hardware identity %04x:%04x:%04x:%04x\n",
+	       dev->name, nic_id.id, nic_id.variant,
+	       nic_id.major, nic_id.minor);
+
+	priv->firmware_type = determine_firmware_type(&nic_id);
+
+	/* Get the firmware version */
+	err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_STAID, &sta_id);
+	if (err) {
+		printk(KERN_ERR "%s: Cannot read station identity: error %d\n",
+		       dev->name, err);
+		return err;
+	}
+
+	le16_to_cpus(&sta_id.id);
+	le16_to_cpus(&sta_id.variant);
+	le16_to_cpus(&sta_id.major);
+	le16_to_cpus(&sta_id.minor);
+	printk(KERN_DEBUG "%s: Station identity  %04x:%04x:%04x:%04x\n",
+	       dev->name, sta_id.id, sta_id.variant,
+	       sta_id.major, sta_id.minor);
+
+	switch (sta_id.id) {
+	case 0x15:
+		printk(KERN_ERR "%s: Primary firmware is active\n",
+		       dev->name);
+		return -ENODEV;
+	case 0x14b:
+		printk(KERN_ERR "%s: Tertiary firmware is active\n",
+		       dev->name);
+		return -ENODEV;
+	case 0x1f:	/* Intersil, Agere, Symbol Spectrum24 */
+	case 0x21:	/* Symbol Spectrum24 Trilogy */
+		break;
+	default:
+		printk(KERN_NOTICE "%s: Unknown station ID, please report\n",
+		       dev->name);
+		break;
+	}
+
+	/* Default capabilities */
+	priv->has_sensitivity = 1;
+	priv->has_mwo = 0;
+	priv->has_preamble = 0;
+	priv->has_port3 = 1;
+	priv->has_ibss = 1;
+	priv->has_wep = 0;
+	priv->has_big_wep = 0;
+	priv->has_alt_txcntl = 0;
+	priv->has_ext_scan = 0;
+	priv->has_wpa = 0;
+	priv->do_fw_download = 0;
+
+	/* Determine capabilities from the firmware version */
+	switch (priv->firmware_type) {
+	case FIRMWARE_TYPE_AGERE:
+		/* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout,
+		   ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */
+		snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
+			 "Lucent/Agere %d.%02d", sta_id.major, sta_id.minor);
+
+		firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor;
+
+		priv->has_ibss = (firmver >= 0x60006);
+		priv->has_wep = (firmver >= 0x40020);
+		priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell
+					  Gold cards from the others? */
+		priv->has_mwo = (firmver >= 0x60000);
+		priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */
+		priv->ibss_port = 1;
+		priv->has_hostscan = (firmver >= 0x8000a);
+		priv->do_fw_download = 1;
+		priv->broken_monitor = (firmver >= 0x80000);
+		priv->has_alt_txcntl = (firmver >= 0x90000); /* All 9.x ? */
+		priv->has_ext_scan = (firmver >= 0x90000); /* All 9.x ? */
+		priv->has_wpa = (firmver >= 0x9002a);
+		/* Tested with Agere firmware :
+		 *	1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II
+		 * Tested CableTron firmware : 4.32 => Anton */
+		break;
+	case FIRMWARE_TYPE_SYMBOL:
+		/* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */
+		/* Intel MAC : 00:02:B3:* */
+		/* 3Com MAC : 00:50:DA:* */
+		memset(tmp, 0, sizeof(tmp));
+		/* Get the Symbol firmware version */
+		err = hermes_read_ltv(hw, USER_BAP,
+				      HERMES_RID_SECONDARYVERSION_SYMBOL,
+				      SYMBOL_MAX_VER_LEN, NULL, &tmp);
+		if (err) {
+			printk(KERN_WARNING
+			       "%s: Error %d reading Symbol firmware info. Wildly guessing capabilities...\n",
+			       dev->name, err);
+			firmver = 0;
+			tmp[0] = '\0';
+		} else {
+			/* The firmware revision is a string, the format is
+			 * something like : "V2.20-01".
+			 * Quick and dirty parsing... - Jean II
+			 */
+			firmver = ((tmp[1] - '0') << 16) | ((tmp[3] - '0') << 12)
+				| ((tmp[4] - '0') << 8) | ((tmp[6] - '0') << 4)
+				| (tmp[7] - '0');
+
+			tmp[SYMBOL_MAX_VER_LEN] = '\0';
+		}
+
+		snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
+			 "Symbol %s", tmp);
+
+		priv->has_ibss = (firmver >= 0x20000);
+		priv->has_wep = (firmver >= 0x15012);
+		priv->has_big_wep = (firmver >= 0x20000);
+		priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) || 
+			       (firmver >= 0x29000 && firmver < 0x30000) ||
+			       firmver >= 0x31000;
+		priv->has_preamble = (firmver >= 0x20000);
+		priv->ibss_port = 4;
+
+		/* Symbol firmware is found on various cards, but
+		 * there has been no attempt to check firmware
+		 * download on non-spectrum_cs based cards.
+		 *
+		 * Given that the Agere firmware download works
+		 * differently, we should avoid doing a firmware
+		 * download with the Symbol algorithm on non-spectrum
+		 * cards.
+		 *
+		 * For now we can identify a spectrum_cs based card
+		 * because it has a firmware reset function.
+		 */
+		priv->do_fw_download = (priv->stop_fw != NULL);
+
+ 		priv->broken_disableport = (firmver == 0x25013) ||
+ 					   (firmver >= 0x30000 && firmver <= 0x31000);
+		priv->has_hostscan = (firmver >= 0x31001) ||
+				     (firmver >= 0x29057 && firmver < 0x30000);
+		/* Tested with Intel firmware : 0x20015 => Jean II */
+		/* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */
+		break;
+	case FIRMWARE_TYPE_INTERSIL:
+		/* D-Link, Linksys, Adtron, ZoomAir, and many others...
+		 * Samsung, Compaq 100/200 and Proxim are slightly
+		 * different and less well tested */
+		/* D-Link MAC : 00:40:05:* */
+		/* Addtron MAC : 00:90:D1:* */
+		snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
+			 "Intersil %d.%d.%d", sta_id.major, sta_id.minor,
+			 sta_id.variant);
+
+		firmver = ((unsigned long)sta_id.major << 16) |
+			((unsigned long)sta_id.minor << 8) | sta_id.variant;
+
+		priv->has_ibss = (firmver >= 0x000700); /* FIXME */
+		priv->has_big_wep = priv->has_wep = (firmver >= 0x000800);
+		priv->has_pm = (firmver >= 0x000700);
+		priv->has_hostscan = (firmver >= 0x010301);
+
+		if (firmver >= 0x000800)
+			priv->ibss_port = 0;
+		else {
+			printk(KERN_NOTICE "%s: Intersil firmware earlier "
+			       "than v0.8.x - several features not supported\n",
+			       dev->name);
+			priv->ibss_port = 1;
+		}
+		break;
+	}
+	printk(KERN_DEBUG "%s: Firmware determined as %s\n", dev->name,
+	       priv->fw_name);
+
+	return 0;
+}
+
+static int orinoco_init(struct net_device *dev)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	hermes_t *hw = &priv->hw;
+	int err = 0;
+	struct hermes_idstring nickbuf;
+	u16 reclen;
+	int len;
+
+	/* No need to lock, the hw_unavailable flag is already set in
+	 * alloc_orinocodev() */
+	priv->nicbuf_size = IEEE80211_MAX_FRAME_LEN + ETH_HLEN;
+
+	/* Initialize the firmware */
+	err = hermes_init(hw);
+	if (err != 0) {
+		printk(KERN_ERR "%s: failed to initialize firmware (err = %d)\n",
+		       dev->name, err);
+		goto out;
+	}
+
+	err = determine_firmware(dev);
+	if (err != 0) {
+		printk(KERN_ERR "%s: Incompatible firmware, aborting\n",
+		       dev->name);
+		goto out;
+	}
+
+	if (priv->do_fw_download) {
+		err = orinoco_download(priv);
+		if (err)
+			priv->do_fw_download = 0;
+
+		/* Check firmware version again */
+		err = determine_firmware(dev);
+		if (err != 0) {
+			printk(KERN_ERR "%s: Incompatible firmware, aborting\n",
+			       dev->name);
+			goto out;
+		}
+	}
+
+	if (priv->has_port3)
+		printk(KERN_DEBUG "%s: Ad-hoc demo mode supported\n", dev->name);
+	if (priv->has_ibss)
+		printk(KERN_DEBUG "%s: IEEE standard IBSS ad-hoc mode supported\n",
+		       dev->name);
+	if (priv->has_wep) {
+		printk(KERN_DEBUG "%s: WEP supported, ", dev->name);
+		if (priv->has_big_wep)
+			printk("104-bit key\n");
+		else
+			printk("40-bit key\n");
+	}
+	if (priv->has_wpa) {
+		printk(KERN_DEBUG "%s: WPA-PSK supported\n", dev->name);
+		if (orinoco_mic_init(priv)) {
+			printk(KERN_ERR "%s: Failed to setup MIC crypto "
+			       "algorithm. Disabling WPA support\n", dev->name);
+			priv->has_wpa = 0;
+		}
+	}
+
+	/* Now we have the firmware capabilities, allocate appropiate
+	 * sized scan buffers */
+	if (orinoco_bss_data_allocate(priv))
+		goto out;
+	orinoco_bss_data_init(priv);
+
+	/* Get the MAC address */
+	err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
+			      ETH_ALEN, NULL, dev->dev_addr);
+	if (err) {
+		printk(KERN_WARNING "%s: failed to read MAC address!\n",
+		       dev->name);
+		goto out;
+	}
+
+	printk(KERN_DEBUG "%s: MAC address %pM\n",
+	       dev->name, dev->dev_addr);
+
+	/* Get the station name */
+	err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
+			      sizeof(nickbuf), &reclen, &nickbuf);
+	if (err) {
+		printk(KERN_ERR "%s: failed to read station name\n",
+		       dev->name);
+		goto out;
+	}
+	if (nickbuf.len)
+		len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len));
+	else
+		len = min(IW_ESSID_MAX_SIZE, 2 * reclen);
+	memcpy(priv->nick, &nickbuf.val, len);
+	priv->nick[len] = '\0';
+
+	printk(KERN_DEBUG "%s: Station name \"%s\"\n", dev->name, priv->nick);
+
+	err = orinoco_allocate_fid(dev);
+	if (err) {
+		printk(KERN_ERR "%s: failed to allocate NIC buffer!\n",
+		       dev->name);
+		goto out;
+	}
+
+	/* Get allowed channels */
+	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CHANNELLIST,
+				  &priv->channel_mask);
+	if (err) {
+		printk(KERN_ERR "%s: failed to read channel list!\n",
+		       dev->name);
+		goto out;
+	}
+
+	/* Get initial AP density */
+	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE,
+				  &priv->ap_density);
+	if (err || priv->ap_density < 1 || priv->ap_density > 3) {
+		priv->has_sensitivity = 0;
+	}
+
+	/* Get initial RTS threshold */
+	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
+				  &priv->rts_thresh);
+	if (err) {
+		printk(KERN_ERR "%s: failed to read RTS threshold!\n",
+		       dev->name);
+		goto out;
+	}
+
+	/* Get initial fragmentation settings */
+	if (priv->has_mwo)
+		err = hermes_read_wordrec(hw, USER_BAP,
+					  HERMES_RID_CNFMWOROBUST_AGERE,
+					  &priv->mwo_robust);
+	else
+		err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
+					  &priv->frag_thresh);
+	if (err) {
+		printk(KERN_ERR "%s: failed to read fragmentation settings!\n",
+		       dev->name);
+		goto out;
+	}
+
+	/* Power management setup */
+	if (priv->has_pm) {
+		priv->pm_on = 0;
+		priv->pm_mcast = 1;
+		err = hermes_read_wordrec(hw, USER_BAP,
+					  HERMES_RID_CNFMAXSLEEPDURATION,
+					  &priv->pm_period);
+		if (err) {
+			printk(KERN_ERR "%s: failed to read power management period!\n",
+			       dev->name);
+			goto out;
+		}
+		err = hermes_read_wordrec(hw, USER_BAP,
+					  HERMES_RID_CNFPMHOLDOVERDURATION,
+					  &priv->pm_timeout);
+		if (err) {
+			printk(KERN_ERR "%s: failed to read power management timeout!\n",
+			       dev->name);
+			goto out;
+		}
+	}
+
+	/* Preamble setup */
+	if (priv->has_preamble) {
+		err = hermes_read_wordrec(hw, USER_BAP,
+					  HERMES_RID_CNFPREAMBLE_SYMBOL,
+					  &priv->preamble);
+		if (err)
+			goto out;
+	}
+		
+	/* Set up the default configuration */
+	priv->iw_mode = IW_MODE_INFRA;
+	/* By default use IEEE/IBSS ad-hoc mode if we have it */
+	priv->prefer_port3 = priv->has_port3 && (! priv->has_ibss);
+	set_port_type(priv);
+	priv->channel = 0; /* use firmware default */
+
+	priv->promiscuous = 0;
+	priv->encode_alg = IW_ENCODE_ALG_NONE;
+	priv->tx_key = 0;
+	priv->wpa_enabled = 0;
+	priv->tkip_cm_active = 0;
+	priv->key_mgmt = 0;
+	priv->wpa_ie_len = 0;
+	priv->wpa_ie = NULL;
+
+	/* Make the hardware available, as long as it hasn't been
+	 * removed elsewhere (e.g. by PCMCIA hot unplug) */
+	spin_lock_irq(&priv->lock);
+	priv->hw_unavailable--;
+	spin_unlock_irq(&priv->lock);
+
+	printk(KERN_DEBUG "%s: ready\n", dev->name);
+
+ out:
+	return err;
+}
+
+struct net_device
+*alloc_orinocodev(int sizeof_card,
+		  struct device *device,
+		  int (*hard_reset)(struct orinoco_private *),
+		  int (*stop_fw)(struct orinoco_private *, int))
+{
+	struct net_device *dev;
+	struct orinoco_private *priv;
+
+	dev = alloc_etherdev(sizeof(struct orinoco_private) + sizeof_card);
+	if (! dev)
+		return NULL;
+	priv = netdev_priv(dev);
+	priv->ndev = dev;
+	if (sizeof_card)
+		priv->card = (void *)((unsigned long)priv
+				      + sizeof(struct orinoco_private));
+	else
+		priv->card = NULL;
+	priv->dev = device;
+
+	/* Setup / override net_device fields */
+	dev->init = orinoco_init;
+	dev->hard_start_xmit = orinoco_xmit;
+	dev->tx_timeout = orinoco_tx_timeout;
+	dev->watchdog_timeo = HZ; /* 1 second timeout */
+	dev->get_stats = orinoco_get_stats;
+	dev->ethtool_ops = &orinoco_ethtool_ops;
+	dev->wireless_handlers = (struct iw_handler_def *)&orinoco_handler_def;
+#ifdef WIRELESS_SPY
+	priv->wireless_data.spy_data = &priv->spy_data;
+	dev->wireless_data = &priv->wireless_data;
+#endif
+	dev->change_mtu = orinoco_change_mtu;
+	dev->set_multicast_list = orinoco_set_multicast_list;
+	/* we use the default eth_mac_addr for setting the MAC addr */
+
+	/* Reserve space in skb for the SNAP header */
+	dev->hard_header_len += ENCAPS_OVERHEAD;
+
+	/* Set up default callbacks */
+	dev->open = orinoco_open;
+	dev->stop = orinoco_stop;
+	priv->hard_reset = hard_reset;
+	priv->stop_fw = stop_fw;
+
+	spin_lock_init(&priv->lock);
+	priv->open = 0;
+	priv->hw_unavailable = 1; /* orinoco_init() must clear this
+				   * before anything else touches the
+				   * hardware */
+	INIT_WORK(&priv->reset_work, orinoco_reset);
+	INIT_WORK(&priv->join_work, orinoco_join_ap);
+	INIT_WORK(&priv->wevent_work, orinoco_send_wevents);
+
+	INIT_LIST_HEAD(&priv->rx_list);
+	tasklet_init(&priv->rx_tasklet, orinoco_rx_isr_tasklet,
+		     (unsigned long) dev);
+
+	netif_carrier_off(dev);
+	priv->last_linkstatus = 0xffff;
+
+	priv->cached_fw = NULL;
+
+	return dev;
+}
+
+void free_orinocodev(struct net_device *dev)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+
+	/* No need to empty priv->rx_list: if the tasklet is scheduled
+	 * when we call tasklet_kill it will run one final time,
+	 * emptying the list */
+	tasklet_kill(&priv->rx_tasklet);
+	if (priv->cached_fw)
+		release_firmware(priv->cached_fw);
+	priv->cached_fw = NULL;
+	priv->wpa_ie_len = 0;
+	kfree(priv->wpa_ie);
+	orinoco_mic_free(priv);
+	orinoco_bss_data_free(priv);
+	free_netdev(dev);
+}
+
+/********************************************************************/
+/* Wireless extensions                                              */
+/********************************************************************/
+
+/* Return : < 0 -> error code ; >= 0 -> length */
+static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active,
+				char buf[IW_ESSID_MAX_SIZE+1])
+{
+	hermes_t *hw = &priv->hw;
+	int err = 0;
+	struct hermes_idstring essidbuf;
+	char *p = (char *)(&essidbuf.val);
+	int len;
+	unsigned long flags;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	if (strlen(priv->desired_essid) > 0) {
+		/* We read the desired SSID from the hardware rather
+		   than from priv->desired_essid, just in case the
+		   firmware is allowed to change it on us. I'm not
+		   sure about this */
+		/* My guess is that the OWNSSID should always be whatever
+		 * we set to the card, whereas CURRENT_SSID is the one that
+		 * may change... - Jean II */
+		u16 rid;
+
+		*active = 1;
+
+		rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID :
+			HERMES_RID_CNFDESIREDSSID;
+		
+		err = hermes_read_ltv(hw, USER_BAP, rid, sizeof(essidbuf),
+				      NULL, &essidbuf);
+		if (err)
+			goto fail_unlock;
+	} else {
+		*active = 0;
+
+		err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID,
+				      sizeof(essidbuf), NULL, &essidbuf);
+		if (err)
+			goto fail_unlock;
+	}
+
+	len = le16_to_cpu(essidbuf.len);
+	BUG_ON(len > IW_ESSID_MAX_SIZE);
+
+	memset(buf, 0, IW_ESSID_MAX_SIZE);
+	memcpy(buf, p, len);
+	err = len;
+
+ fail_unlock:
+	orinoco_unlock(priv, &flags);
+
+	return err;       
+}
+
+static long orinoco_hw_get_freq(struct orinoco_private *priv)
+{
+	
+	hermes_t *hw = &priv->hw;
+	int err = 0;
+	u16 channel;
+	long freq = 0;
+	unsigned long flags;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+	
+	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL, &channel);
+	if (err)
+		goto out;
+
+	/* Intersil firmware 1.3.5 returns 0 when the interface is down */
+	if (channel == 0) {
+		err = -EBUSY;
+		goto out;
+	}
+
+	if ( (channel < 1) || (channel > NUM_CHANNELS) ) {
+		printk(KERN_WARNING "%s: Channel out of range (%d)!\n",
+		       priv->ndev->name, channel);
+		err = -EBUSY;
+		goto out;
+
+	}
+	freq = channel_frequency[channel-1] * 100000;
+
+ out:
+	orinoco_unlock(priv, &flags);
+
+	if (err > 0)
+		err = -EBUSY;
+	return err ? err : freq;
+}
+
+static int orinoco_hw_get_bitratelist(struct orinoco_private *priv,
+				      int *numrates, s32 *rates, int max)
+{
+	hermes_t *hw = &priv->hw;
+	struct hermes_idstring list;
+	unsigned char *p = (unsigned char *)&list.val;
+	int err = 0;
+	int num;
+	int i;
+	unsigned long flags;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES,
+			      sizeof(list), NULL, &list);
+	orinoco_unlock(priv, &flags);
+
+	if (err)
+		return err;
+	
+	num = le16_to_cpu(list.len);
+	*numrates = num;
+	num = min(num, max);
+
+	for (i = 0; i < num; i++) {
+		rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */
+	}
+
+	return 0;
+}
+
+static int orinoco_ioctl_getname(struct net_device *dev,
+				 struct iw_request_info *info,
+				 char *name,
+				 char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	int numrates;
+	int err;
+
+	err = orinoco_hw_get_bitratelist(priv, &numrates, NULL, 0);
+
+	if (!err && (numrates > 2))
+		strcpy(name, "IEEE 802.11b");
+	else
+		strcpy(name, "IEEE 802.11-DS");
+
+	return 0;
+}
+
+static int orinoco_ioctl_setwap(struct net_device *dev,
+				struct iw_request_info *info,
+				struct sockaddr *ap_addr,
+				char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	int err = -EINPROGRESS;		/* Call commit handler */
+	unsigned long flags;
+	static const u8 off_addr[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+	static const u8 any_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	/* Enable automatic roaming - no sanity checks are needed */
+	if (memcmp(&ap_addr->sa_data, off_addr, ETH_ALEN) == 0 ||
+	    memcmp(&ap_addr->sa_data, any_addr, ETH_ALEN) == 0) {
+		priv->bssid_fixed = 0;
+		memset(priv->desired_bssid, 0, ETH_ALEN);
+
+		/* "off" means keep existing connection */
+		if (ap_addr->sa_data[0] == 0) {
+			__orinoco_hw_set_wap(priv);
+			err = 0;
+		}
+		goto out;
+	}
+
+	if (priv->firmware_type == FIRMWARE_TYPE_AGERE) {
+		printk(KERN_WARNING "%s: Lucent/Agere firmware doesn't "
+		       "support manual roaming\n",
+		       dev->name);
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
+	if (priv->iw_mode != IW_MODE_INFRA) {
+		printk(KERN_WARNING "%s: Manual roaming supported only in "
+		       "managed mode\n", dev->name);
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
+	/* Intersil firmware hangs without Desired ESSID */
+	if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL &&
+	    strlen(priv->desired_essid) == 0) {
+		printk(KERN_WARNING "%s: Desired ESSID must be set for "
+		       "manual roaming\n", dev->name);
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
+	/* Finally, enable manual roaming */
+	priv->bssid_fixed = 1;
+	memcpy(priv->desired_bssid, &ap_addr->sa_data, ETH_ALEN);
+
+ out:
+	orinoco_unlock(priv, &flags);
+	return err;
+}
+
+static int orinoco_ioctl_getwap(struct net_device *dev,
+				struct iw_request_info *info,
+				struct sockaddr *ap_addr,
+				char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+
+	hermes_t *hw = &priv->hw;
+	int err = 0;
+	unsigned long flags;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	ap_addr->sa_family = ARPHRD_ETHER;
+	err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
+			      ETH_ALEN, NULL, ap_addr->sa_data);
+
+	orinoco_unlock(priv, &flags);
+
+	return err;
+}
+
+static int orinoco_ioctl_setmode(struct net_device *dev,
+				 struct iw_request_info *info,
+				 u32 *mode,
+				 char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	int err = -EINPROGRESS;		/* Call commit handler */
+	unsigned long flags;
+
+	if (priv->iw_mode == *mode)
+		return 0;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	switch (*mode) {
+	case IW_MODE_ADHOC:
+		if (!priv->has_ibss && !priv->has_port3)
+			err = -EOPNOTSUPP;
+		break;
+
+	case IW_MODE_INFRA:
+		break;
+
+	case IW_MODE_MONITOR:
+		if (priv->broken_monitor && !force_monitor) {
+			printk(KERN_WARNING "%s: Monitor mode support is "
+			       "buggy in this firmware, not enabling\n",
+			       dev->name);
+			err = -EOPNOTSUPP;
+		}
+		break;
+
+	default:
+		err = -EOPNOTSUPP;
+		break;
+	}
+
+	if (err == -EINPROGRESS) {
+		priv->iw_mode = *mode;
+		set_port_type(priv);
+	}
+
+	orinoco_unlock(priv, &flags);
+
+	return err;
+}
+
+static int orinoco_ioctl_getmode(struct net_device *dev,
+				 struct iw_request_info *info,
+				 u32 *mode,
+				 char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+
+	*mode = priv->iw_mode;
+	return 0;
+}
+
+static int orinoco_ioctl_getiwrange(struct net_device *dev,
+				    struct iw_request_info *info,
+				    struct iw_point *rrq,
+				    char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	int err = 0;
+	struct iw_range *range = (struct iw_range *) extra;
+	int numrates;
+	int i, k;
+
+	rrq->length = sizeof(struct iw_range);
+	memset(range, 0, sizeof(struct iw_range));
+
+	range->we_version_compiled = WIRELESS_EXT;
+	range->we_version_source = 22;
+
+	/* Set available channels/frequencies */
+	range->num_channels = NUM_CHANNELS;
+	k = 0;
+	for (i = 0; i < NUM_CHANNELS; i++) {
+		if (priv->channel_mask & (1 << i)) {
+			range->freq[k].i = i + 1;
+			range->freq[k].m = channel_frequency[i] * 100000;
+			range->freq[k].e = 1;
+			k++;
+		}
+		
+		if (k >= IW_MAX_FREQUENCIES)
+			break;
+	}
+	range->num_frequency = k;
+	range->sensitivity = 3;
+
+	if (priv->has_wep) {
+		range->max_encoding_tokens = ORINOCO_MAX_KEYS;
+		range->encoding_size[0] = SMALL_KEY_SIZE;
+		range->num_encoding_sizes = 1;
+
+		if (priv->has_big_wep) {
+			range->encoding_size[1] = LARGE_KEY_SIZE;
+			range->num_encoding_sizes = 2;
+		}
+	}
+
+	if (priv->has_wpa)
+		range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_CIPHER_TKIP;
+
+	if ((priv->iw_mode == IW_MODE_ADHOC) && (!SPY_NUMBER(priv))){
+		/* Quality stats meaningless in ad-hoc mode */
+	} else {
+		range->max_qual.qual = 0x8b - 0x2f;
+		range->max_qual.level = 0x2f - 0x95 - 1;
+		range->max_qual.noise = 0x2f - 0x95 - 1;
+		/* Need to get better values */
+		range->avg_qual.qual = 0x24;
+		range->avg_qual.level = 0xC2;
+		range->avg_qual.noise = 0x9E;
+	}
+
+	err = orinoco_hw_get_bitratelist(priv, &numrates,
+					 range->bitrate, IW_MAX_BITRATES);
+	if (err)
+		return err;
+	range->num_bitrates = numrates;
+
+	/* Set an indication of the max TCP throughput in bit/s that we can
+	 * expect using this interface. May be use for QoS stuff...
+	 * Jean II */
+	if (numrates > 2)
+		range->throughput = 5 * 1000 * 1000;	/* ~5 Mb/s */
+	else
+		range->throughput = 1.5 * 1000 * 1000;	/* ~1.5 Mb/s */
+
+	range->min_rts = 0;
+	range->max_rts = 2347;
+	range->min_frag = 256;
+	range->max_frag = 2346;
+
+	range->min_pmp = 0;
+	range->max_pmp = 65535000;
+	range->min_pmt = 0;
+	range->max_pmt = 65535 * 1000;	/* ??? */
+	range->pmp_flags = IW_POWER_PERIOD;
+	range->pmt_flags = IW_POWER_TIMEOUT;
+	range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_UNICAST_R;
+
+	range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME;
+	range->retry_flags = IW_RETRY_LIMIT;
+	range->r_time_flags = IW_RETRY_LIFETIME;
+	range->min_retry = 0;
+	range->max_retry = 65535;	/* ??? */
+	range->min_r_time = 0;
+	range->max_r_time = 65535 * 1000;	/* ??? */
+
+	if (priv->firmware_type == FIRMWARE_TYPE_AGERE)
+		range->scan_capa = IW_SCAN_CAPA_ESSID;
+	else
+		range->scan_capa = IW_SCAN_CAPA_NONE;
+
+	/* Event capability (kernel) */
+	IW_EVENT_CAPA_SET_KERNEL(range->event_capa);
+	/* Event capability (driver) */
+	IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWTHRSPY);
+	IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP);
+	IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN);
+	IW_EVENT_CAPA_SET(range->event_capa, IWEVTXDROP);
+
+	return 0;
+}
+
+static int orinoco_ioctl_setiwencode(struct net_device *dev,
+				     struct iw_request_info *info,
+				     struct iw_point *erq,
+				     char *keybuf)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	int index = (erq->flags & IW_ENCODE_INDEX) - 1;
+	int setindex = priv->tx_key;
+	int encode_alg = priv->encode_alg;
+	int restricted = priv->wep_restrict;
+	u16 xlen = 0;
+	int err = -EINPROGRESS;		/* Call commit handler */
+	unsigned long flags;
+
+	if (! priv->has_wep)
+		return -EOPNOTSUPP;
+
+	if (erq->pointer) {
+		/* We actually have a key to set - check its length */
+		if (erq->length > LARGE_KEY_SIZE)
+			return -E2BIG;
+
+		if ( (erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep )
+			return -E2BIG;
+	}
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	/* Clear any TKIP key we have */
+	if ((priv->has_wpa) && (priv->encode_alg == IW_ENCODE_ALG_TKIP))
+		(void) orinoco_clear_tkip_key(priv, setindex);
+
+	if (erq->length > 0) {
+		if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
+			index = priv->tx_key;
+
+		/* Adjust key length to a supported value */
+		if (erq->length > SMALL_KEY_SIZE) {
+			xlen = LARGE_KEY_SIZE;
+		} else if (erq->length > 0) {
+			xlen = SMALL_KEY_SIZE;
+		} else
+			xlen = 0;
+
+		/* Switch on WEP if off */
+		if ((encode_alg != IW_ENCODE_ALG_WEP) && (xlen > 0)) {
+			setindex = index;
+			encode_alg = IW_ENCODE_ALG_WEP;
+		}
+	} else {
+		/* Important note : if the user do "iwconfig eth0 enc off",
+		 * we will arrive there with an index of -1. This is valid
+		 * but need to be taken care off... Jean II */
+		if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) {
+			if((index != -1) || (erq->flags == 0)) {
+				err = -EINVAL;
+				goto out;
+			}
+		} else {
+			/* Set the index : Check that the key is valid */
+			if(priv->keys[index].len == 0) {
+				err = -EINVAL;
+				goto out;
+			}
+			setindex = index;
+		}
+	}
+
+	if (erq->flags & IW_ENCODE_DISABLED)
+		encode_alg = IW_ENCODE_ALG_NONE;
+	if (erq->flags & IW_ENCODE_OPEN)
+		restricted = 0;
+	if (erq->flags & IW_ENCODE_RESTRICTED)
+		restricted = 1;
+
+	if (erq->pointer && erq->length > 0) {
+		priv->keys[index].len = cpu_to_le16(xlen);
+		memset(priv->keys[index].data, 0,
+		       sizeof(priv->keys[index].data));
+		memcpy(priv->keys[index].data, keybuf, erq->length);
+	}
+	priv->tx_key = setindex;
+
+	/* Try fast key change if connected and only keys are changed */
+	if ((priv->encode_alg == encode_alg) &&
+	    (priv->wep_restrict == restricted) &&
+	    netif_carrier_ok(dev)) {
+		err = __orinoco_hw_setup_wepkeys(priv);
+		/* No need to commit if successful */
+		goto out;
+	}
+
+	priv->encode_alg = encode_alg;
+	priv->wep_restrict = restricted;
+
+ out:
+	orinoco_unlock(priv, &flags);
+
+	return err;
+}
+
+static int orinoco_ioctl_getiwencode(struct net_device *dev,
+				     struct iw_request_info *info,
+				     struct iw_point *erq,
+				     char *keybuf)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	int index = (erq->flags & IW_ENCODE_INDEX) - 1;
+	u16 xlen = 0;
+	unsigned long flags;
+
+	if (! priv->has_wep)
+		return -EOPNOTSUPP;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
+		index = priv->tx_key;
+
+	erq->flags = 0;
+	if (!priv->encode_alg)
+		erq->flags |= IW_ENCODE_DISABLED;
+	erq->flags |= index + 1;
+
+	if (priv->wep_restrict)
+		erq->flags |= IW_ENCODE_RESTRICTED;
+	else
+		erq->flags |= IW_ENCODE_OPEN;
+
+	xlen = le16_to_cpu(priv->keys[index].len);
+
+	erq->length = xlen;
+
+	memcpy(keybuf, priv->keys[index].data, ORINOCO_MAX_KEY_SIZE);
+
+	orinoco_unlock(priv, &flags);
+	return 0;
+}
+
+static int orinoco_ioctl_setessid(struct net_device *dev,
+				  struct iw_request_info *info,
+				  struct iw_point *erq,
+				  char *essidbuf)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	unsigned long flags;
+
+	/* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it
+	 * anyway... - Jean II */
+
+	/* Hum... Should not use Wireless Extension constant (may change),
+	 * should use our own... - Jean II */
+	if (erq->length > IW_ESSID_MAX_SIZE)
+		return -E2BIG;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	/* NULL the string (for NULL termination & ESSID = ANY) - Jean II */
+	memset(priv->desired_essid, 0, sizeof(priv->desired_essid));
+
+	/* If not ANY, get the new ESSID */
+	if (erq->flags) {
+		memcpy(priv->desired_essid, essidbuf, erq->length);
+	}
+
+	orinoco_unlock(priv, &flags);
+
+	return -EINPROGRESS;		/* Call commit handler */
+}
+
+static int orinoco_ioctl_getessid(struct net_device *dev,
+				  struct iw_request_info *info,
+				  struct iw_point *erq,
+				  char *essidbuf)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	int active;
+	int err = 0;
+	unsigned long flags;
+
+	if (netif_running(dev)) {
+		err = orinoco_hw_get_essid(priv, &active, essidbuf);
+		if (err < 0)
+			return err;
+		erq->length = err;
+	} else {
+		if (orinoco_lock(priv, &flags) != 0)
+			return -EBUSY;
+		memcpy(essidbuf, priv->desired_essid, IW_ESSID_MAX_SIZE);
+		erq->length = strlen(priv->desired_essid);
+		orinoco_unlock(priv, &flags);
+	}
+
+	erq->flags = 1;
+
+	return 0;
+}
+
+static int orinoco_ioctl_setnick(struct net_device *dev,
+				 struct iw_request_info *info,
+				 struct iw_point *nrq,
+				 char *nickbuf)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	unsigned long flags;
+
+	if (nrq->length > IW_ESSID_MAX_SIZE)
+		return -E2BIG;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	memset(priv->nick, 0, sizeof(priv->nick));
+	memcpy(priv->nick, nickbuf, nrq->length);
+
+	orinoco_unlock(priv, &flags);
+
+	return -EINPROGRESS;		/* Call commit handler */
+}
+
+static int orinoco_ioctl_getnick(struct net_device *dev,
+				 struct iw_request_info *info,
+				 struct iw_point *nrq,
+				 char *nickbuf)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	unsigned long flags;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	memcpy(nickbuf, priv->nick, IW_ESSID_MAX_SIZE);
+	orinoco_unlock(priv, &flags);
+
+	nrq->length = strlen(priv->nick);
+
+	return 0;
+}
+
+static int orinoco_ioctl_setfreq(struct net_device *dev,
+				 struct iw_request_info *info,
+				 struct iw_freq *frq,
+				 char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	int chan = -1;
+	unsigned long flags;
+	int err = -EINPROGRESS;		/* Call commit handler */
+
+	/* In infrastructure mode the AP sets the channel */
+	if (priv->iw_mode == IW_MODE_INFRA)
+		return -EBUSY;
+
+	if ( (frq->e == 0) && (frq->m <= 1000) ) {
+		/* Setting by channel number */
+		chan = frq->m;
+	} else {
+		/* Setting by frequency - search the table */
+		int mult = 1;
+		int i;
+
+		for (i = 0; i < (6 - frq->e); i++)
+			mult *= 10;
+
+		for (i = 0; i < NUM_CHANNELS; i++)
+			if (frq->m == (channel_frequency[i] * mult))
+				chan = i+1;
+	}
+
+	if ( (chan < 1) || (chan > NUM_CHANNELS) ||
+	     ! (priv->channel_mask & (1 << (chan-1)) ) )
+		return -EINVAL;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	priv->channel = chan;
+	if (priv->iw_mode == IW_MODE_MONITOR) {
+		/* Fast channel change - no commit if successful */
+		hermes_t *hw = &priv->hw;
+		err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
+					    HERMES_TEST_SET_CHANNEL,
+					chan, NULL);
+	}
+	orinoco_unlock(priv, &flags);
+
+	return err;
+}
+
+static int orinoco_ioctl_getfreq(struct net_device *dev,
+				 struct iw_request_info *info,
+				 struct iw_freq *frq,
+				 char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	int tmp;
+
+	/* Locking done in there */
+	tmp = orinoco_hw_get_freq(priv);
+	if (tmp < 0) {
+		return tmp;
+	}
+
+	frq->m = tmp;
+	frq->e = 1;
+
+	return 0;
+}
+
+static int orinoco_ioctl_getsens(struct net_device *dev,
+				 struct iw_request_info *info,
+				 struct iw_param *srq,
+				 char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	hermes_t *hw = &priv->hw;
+	u16 val;
+	int err;
+	unsigned long flags;
+
+	if (!priv->has_sensitivity)
+		return -EOPNOTSUPP;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+	err = hermes_read_wordrec(hw, USER_BAP,
+				  HERMES_RID_CNFSYSTEMSCALE, &val);
+	orinoco_unlock(priv, &flags);
+
+	if (err)
+		return err;
+
+	srq->value = val;
+	srq->fixed = 0; /* auto */
+
+	return 0;
+}
+
+static int orinoco_ioctl_setsens(struct net_device *dev,
+				 struct iw_request_info *info,
+				 struct iw_param *srq,
+				 char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	int val = srq->value;
+	unsigned long flags;
+
+	if (!priv->has_sensitivity)
+		return -EOPNOTSUPP;
+
+	if ((val < 1) || (val > 3))
+		return -EINVAL;
+	
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+	priv->ap_density = val;
+	orinoco_unlock(priv, &flags);
+
+	return -EINPROGRESS;		/* Call commit handler */
+}
+
+static int orinoco_ioctl_setrts(struct net_device *dev,
+				struct iw_request_info *info,
+				struct iw_param *rrq,
+				char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	int val = rrq->value;
+	unsigned long flags;
+
+	if (rrq->disabled)
+		val = 2347;
+
+	if ( (val < 0) || (val > 2347) )
+		return -EINVAL;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	priv->rts_thresh = val;
+	orinoco_unlock(priv, &flags);
+
+	return -EINPROGRESS;		/* Call commit handler */
+}
+
+static int orinoco_ioctl_getrts(struct net_device *dev,
+				struct iw_request_info *info,
+				struct iw_param *rrq,
+				char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+
+	rrq->value = priv->rts_thresh;
+	rrq->disabled = (rrq->value == 2347);
+	rrq->fixed = 1;
+
+	return 0;
+}
+
+static int orinoco_ioctl_setfrag(struct net_device *dev,
+				 struct iw_request_info *info,
+				 struct iw_param *frq,
+				 char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	int err = -EINPROGRESS;		/* Call commit handler */
+	unsigned long flags;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	if (priv->has_mwo) {
+		if (frq->disabled)
+			priv->mwo_robust = 0;
+		else {
+			if (frq->fixed)
+				printk(KERN_WARNING "%s: Fixed fragmentation is "
+				       "not supported on this firmware. "
+				       "Using MWO robust instead.\n", dev->name);
+			priv->mwo_robust = 1;
+		}
+	} else {
+		if (frq->disabled)
+			priv->frag_thresh = 2346;
+		else {
+			if ( (frq->value < 256) || (frq->value > 2346) )
+				err = -EINVAL;
+			else
+				priv->frag_thresh = frq->value & ~0x1; /* must be even */
+		}
+	}
+
+	orinoco_unlock(priv, &flags);
+
+	return err;
+}
+
+static int orinoco_ioctl_getfrag(struct net_device *dev,
+				 struct iw_request_info *info,
+				 struct iw_param *frq,
+				 char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	hermes_t *hw = &priv->hw;
+	int err;
+	u16 val;
+	unsigned long flags;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+	
+	if (priv->has_mwo) {
+		err = hermes_read_wordrec(hw, USER_BAP,
+					  HERMES_RID_CNFMWOROBUST_AGERE,
+					  &val);
+		if (err)
+			val = 0;
+
+		frq->value = val ? 2347 : 0;
+		frq->disabled = ! val;
+		frq->fixed = 0;
+	} else {
+		err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
+					  &val);
+		if (err)
+			val = 0;
+
+		frq->value = val;
+		frq->disabled = (val >= 2346);
+		frq->fixed = 1;
+	}
+
+	orinoco_unlock(priv, &flags);
+	
+	return err;
+}
+
+static int orinoco_ioctl_setrate(struct net_device *dev,
+				 struct iw_request_info *info,
+				 struct iw_param *rrq,
+				 char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	int ratemode = -1;
+	int bitrate; /* 100s of kilobits */
+	int i;
+	unsigned long flags;
+	
+	/* As the user space doesn't know our highest rate, it uses -1
+	 * to ask us to set the highest rate.  Test it using "iwconfig
+	 * ethX rate auto" - Jean II */
+	if (rrq->value == -1)
+		bitrate = 110;
+	else {
+		if (rrq->value % 100000)
+			return -EINVAL;
+		bitrate = rrq->value / 100000;
+	}
+
+	if ( (bitrate != 10) && (bitrate != 20) &&
+	     (bitrate != 55) && (bitrate != 110) )
+		return -EINVAL;
+
+	for (i = 0; i < BITRATE_TABLE_SIZE; i++)
+		if ( (bitrate_table[i].bitrate == bitrate) &&
+		     (bitrate_table[i].automatic == ! rrq->fixed) ) {
+			ratemode = i;
+			break;
+		}
+	
+	if (ratemode == -1)
+		return -EINVAL;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+	priv->bitratemode = ratemode;
+	orinoco_unlock(priv, &flags);
+
+	return -EINPROGRESS;
+}
+
+static int orinoco_ioctl_getrate(struct net_device *dev,
+				 struct iw_request_info *info,
+				 struct iw_param *rrq,
+				 char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	hermes_t *hw = &priv->hw;
+	int err = 0;
+	int ratemode;
+	int i;
+	u16 val;
+	unsigned long flags;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	ratemode = priv->bitratemode;
+
+	BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE));
+
+	rrq->value = bitrate_table[ratemode].bitrate * 100000;
+	rrq->fixed = ! bitrate_table[ratemode].automatic;
+	rrq->disabled = 0;
+
+	/* If the interface is running we try to find more about the
+	   current mode */
+	if (netif_running(dev)) {
+		err = hermes_read_wordrec(hw, USER_BAP,
+					  HERMES_RID_CURRENTTXRATE, &val);
+		if (err)
+			goto out;
+		
+		switch (priv->firmware_type) {
+		case FIRMWARE_TYPE_AGERE: /* Lucent style rate */
+			/* Note : in Lucent firmware, the return value of
+			 * HERMES_RID_CURRENTTXRATE is the bitrate in Mb/s,
+			 * and therefore is totally different from the
+			 * encoding of HERMES_RID_CNFTXRATECONTROL.
+			 * Don't forget that 6Mb/s is really 5.5Mb/s */
+			if (val == 6)
+				rrq->value = 5500000;
+			else
+				rrq->value = val * 1000000;
+			break;
+		case FIRMWARE_TYPE_INTERSIL: /* Intersil style rate */
+		case FIRMWARE_TYPE_SYMBOL: /* Symbol style rate */
+			for (i = 0; i < BITRATE_TABLE_SIZE; i++)
+				if (bitrate_table[i].intersil_txratectrl == val) {
+					ratemode = i;
+					break;
+				}
+			if (i >= BITRATE_TABLE_SIZE)
+				printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n",
+				       dev->name, val);
+
+			rrq->value = bitrate_table[ratemode].bitrate * 100000;
+			break;
+		default:
+			BUG();
+		}
+	}
+
+ out:
+	orinoco_unlock(priv, &flags);
+
+	return err;
+}
+
+static int orinoco_ioctl_setpower(struct net_device *dev,
+				  struct iw_request_info *info,
+				  struct iw_param *prq,
+				  char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	int err = -EINPROGRESS;		/* Call commit handler */
+	unsigned long flags;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	if (prq->disabled) {
+		priv->pm_on = 0;
+	} else {
+		switch (prq->flags & IW_POWER_MODE) {
+		case IW_POWER_UNICAST_R:
+			priv->pm_mcast = 0;
+			priv->pm_on = 1;
+			break;
+		case IW_POWER_ALL_R:
+			priv->pm_mcast = 1;
+			priv->pm_on = 1;
+			break;
+		case IW_POWER_ON:
+			/* No flags : but we may have a value - Jean II */
+			break;
+		default:
+			err = -EINVAL;
+			goto out;
+		}
+		
+		if (prq->flags & IW_POWER_TIMEOUT) {
+			priv->pm_on = 1;
+			priv->pm_timeout = prq->value / 1000;
+		}
+		if (prq->flags & IW_POWER_PERIOD) {
+			priv->pm_on = 1;
+			priv->pm_period = prq->value / 1000;
+		}
+		/* It's valid to not have a value if we are just toggling
+		 * the flags... Jean II */
+		if(!priv->pm_on) {
+			err = -EINVAL;
+			goto out;
+		}			
+	}
+
+ out:
+	orinoco_unlock(priv, &flags);
+
+	return err;
+}
+
+static int orinoco_ioctl_getpower(struct net_device *dev,
+				  struct iw_request_info *info,
+				  struct iw_param *prq,
+				  char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	hermes_t *hw = &priv->hw;
+	int err = 0;
+	u16 enable, period, timeout, mcast;
+	unsigned long flags;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+	
+	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMENABLED, &enable);
+	if (err)
+		goto out;
+
+	err = hermes_read_wordrec(hw, USER_BAP,
+				  HERMES_RID_CNFMAXSLEEPDURATION, &period);
+	if (err)
+		goto out;
+
+	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMHOLDOVERDURATION, &timeout);
+	if (err)
+		goto out;
+
+	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFMULTICASTRECEIVE, &mcast);
+	if (err)
+		goto out;
+
+	prq->disabled = !enable;
+	/* Note : by default, display the period */
+	if ((prq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
+		prq->flags = IW_POWER_TIMEOUT;
+		prq->value = timeout * 1000;
+	} else {
+		prq->flags = IW_POWER_PERIOD;
+		prq->value = period * 1000;
+	}
+	if (mcast)
+		prq->flags |= IW_POWER_ALL_R;
+	else
+		prq->flags |= IW_POWER_UNICAST_R;
+
+ out:
+	orinoco_unlock(priv, &flags);
+
+	return err;
+}
+
+static int orinoco_ioctl_set_encodeext(struct net_device *dev,
+				       struct iw_request_info *info,
+				       union iwreq_data *wrqu,
+				       char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct iw_point *encoding = &wrqu->encoding;
+	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+	int idx, alg = ext->alg, set_key = 1;
+	unsigned long flags;
+	int err = -EINVAL;
+	u16 key_len;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	/* Determine and validate the key index */
+	idx = encoding->flags & IW_ENCODE_INDEX;
+	if (idx) {
+		if ((idx < 1) || (idx > 4))
+			goto out;
+		idx--;
+	} else
+		idx = priv->tx_key;
+
+	if (encoding->flags & IW_ENCODE_DISABLED)
+	    alg = IW_ENCODE_ALG_NONE;
+
+	if (priv->has_wpa && (alg != IW_ENCODE_ALG_TKIP)) {
+		/* Clear any TKIP TX key we had */
+		(void) orinoco_clear_tkip_key(priv, priv->tx_key);
+	}
+
+	if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
+		priv->tx_key = idx;
+		set_key = ((alg == IW_ENCODE_ALG_TKIP) ||
+			   (ext->key_len > 0)) ? 1 : 0;
+	}
+
+	if (set_key) {
+		/* Set the requested key first */
+		switch (alg) {
+		case IW_ENCODE_ALG_NONE:
+			priv->encode_alg = alg;
+			priv->keys[idx].len = 0;
+			break;
+
+		case IW_ENCODE_ALG_WEP:
+			if (ext->key_len > SMALL_KEY_SIZE)
+				key_len = LARGE_KEY_SIZE;
+			else if (ext->key_len > 0)
+				key_len = SMALL_KEY_SIZE;
+			else
+				goto out;
+
+			priv->encode_alg = alg;
+			priv->keys[idx].len = cpu_to_le16(key_len);
+
+			key_len = min(ext->key_len, key_len);
+
+			memset(priv->keys[idx].data, 0, ORINOCO_MAX_KEY_SIZE);
+			memcpy(priv->keys[idx].data, ext->key, key_len);
+			break;
+
+		case IW_ENCODE_ALG_TKIP:
+		{
+			hermes_t *hw = &priv->hw;
+			u8 *tkip_iv = NULL;
+
+			if (!priv->has_wpa ||
+			    (ext->key_len > sizeof(priv->tkip_key[0])))
+				goto out;
+
+			priv->encode_alg = alg;
+			memset(&priv->tkip_key[idx], 0,
+			       sizeof(priv->tkip_key[idx]));
+			memcpy(&priv->tkip_key[idx], ext->key, ext->key_len);
+
+			if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID)
+				tkip_iv = &ext->rx_seq[0];
+
+			err = __orinoco_hw_set_tkip_key(hw, idx,
+				 ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY,
+				 (u8 *) &priv->tkip_key[idx],
+				 tkip_iv, NULL);
+			if (err)
+				printk(KERN_ERR "%s: Error %d setting TKIP key"
+				       "\n", dev->name, err);
+
+			goto out;
+		}
+		default:
+			goto out;
+		}
+	}
+	err = -EINPROGRESS;
+ out:
+	orinoco_unlock(priv, &flags);
+
+	return err;
+}
+
+static int orinoco_ioctl_get_encodeext(struct net_device *dev,
+				       struct iw_request_info *info,
+				       union iwreq_data *wrqu,
+				       char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct iw_point *encoding = &wrqu->encoding;
+	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+	int idx, max_key_len;
+	unsigned long flags;
+	int err;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	err = -EINVAL;
+	max_key_len = encoding->length - sizeof(*ext);
+	if (max_key_len < 0)
+		goto out;
+
+	idx = encoding->flags & IW_ENCODE_INDEX;
+	if (idx) {
+		if ((idx < 1) || (idx > 4))
+			goto out;
+		idx--;
+	} else
+		idx = priv->tx_key;
+
+	encoding->flags = idx + 1;
+	memset(ext, 0, sizeof(*ext));
+
+	ext->alg = priv->encode_alg;
+	switch (priv->encode_alg) {
+	case IW_ENCODE_ALG_NONE:
+		ext->key_len = 0;
+		encoding->flags |= IW_ENCODE_DISABLED;
+		break;
+	case IW_ENCODE_ALG_WEP:
+		ext->key_len = min_t(u16, le16_to_cpu(priv->keys[idx].len),
+				     max_key_len);
+		memcpy(ext->key, priv->keys[idx].data, ext->key_len);
+		encoding->flags |= IW_ENCODE_ENABLED;
+		break;
+	case IW_ENCODE_ALG_TKIP:
+		ext->key_len = min_t(u16, sizeof(struct orinoco_tkip_key),
+				     max_key_len);
+		memcpy(ext->key, &priv->tkip_key[idx], ext->key_len);
+		encoding->flags |= IW_ENCODE_ENABLED;
+		break;
+	}
+
+	err = 0;
+ out:
+	orinoco_unlock(priv, &flags);
+
+	return err;
+}
+
+static int orinoco_ioctl_set_auth(struct net_device *dev,
+				  struct iw_request_info *info,
+				  union iwreq_data *wrqu, char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	hermes_t *hw = &priv->hw;
+	struct iw_param *param = &wrqu->param;
+	unsigned long flags;
+	int ret = -EINPROGRESS;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	switch (param->flags & IW_AUTH_INDEX) {
+	case IW_AUTH_WPA_VERSION:
+	case IW_AUTH_CIPHER_PAIRWISE:
+	case IW_AUTH_CIPHER_GROUP:
+	case IW_AUTH_RX_UNENCRYPTED_EAPOL:
+	case IW_AUTH_PRIVACY_INVOKED:
+	case IW_AUTH_DROP_UNENCRYPTED:
+		/*
+		 * orinoco does not use these parameters
+		 */
+		break;
+
+	case IW_AUTH_KEY_MGMT:
+		/* wl_lkm implies value 2 == PSK for Hermes I
+		 * which ties in with WEXT
+		 * no other hints tho :(
+		 */
+		priv->key_mgmt = param->value;
+		break;
+
+	case IW_AUTH_TKIP_COUNTERMEASURES:
+		/* When countermeasures are enabled, shut down the
+		 * card; when disabled, re-enable the card. This must
+		 * take effect immediately.
+		 *
+		 * TODO: Make sure that the EAPOL message is getting
+		 *       out before card disabled
+		 */
+		if (param->value) {
+			priv->tkip_cm_active = 1;
+			ret = hermes_enable_port(hw, 0);
+		} else {
+			priv->tkip_cm_active = 0;
+			ret = hermes_disable_port(hw, 0);
+		}
+		break;
+
+	case IW_AUTH_80211_AUTH_ALG:
+		if (param->value & IW_AUTH_ALG_SHARED_KEY)
+			priv->wep_restrict = 1;
+		else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM)
+			priv->wep_restrict = 0;
+		else
+			ret = -EINVAL;
+		break;
+
+	case IW_AUTH_WPA_ENABLED:
+		if (priv->has_wpa) {
+			priv->wpa_enabled = param->value ? 1 : 0;
+		} else {
+			if (param->value)
+				ret = -EOPNOTSUPP;
+			/* else silently accept disable of WPA */
+			priv->wpa_enabled = 0;
+		}
+		break;
+
+	default:
+		ret = -EOPNOTSUPP;
+	}
+
+	orinoco_unlock(priv, &flags);
+	return ret;
+}
+
+static int orinoco_ioctl_get_auth(struct net_device *dev,
+				  struct iw_request_info *info,
+				  union iwreq_data *wrqu, char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct iw_param *param = &wrqu->param;
+	unsigned long flags;
+	int ret = 0;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	switch (param->flags & IW_AUTH_INDEX) {
+	case IW_AUTH_KEY_MGMT:
+		param->value = priv->key_mgmt;
+		break;
+
+	case IW_AUTH_TKIP_COUNTERMEASURES:
+		param->value = priv->tkip_cm_active;
+		break;
+
+	case IW_AUTH_80211_AUTH_ALG:
+		if (priv->wep_restrict)
+			param->value = IW_AUTH_ALG_SHARED_KEY;
+		else
+			param->value = IW_AUTH_ALG_OPEN_SYSTEM;
+		break;
+
+	case IW_AUTH_WPA_ENABLED:
+		param->value = priv->wpa_enabled;
+		break;
+
+	default:
+		ret = -EOPNOTSUPP;
+	}
+
+	orinoco_unlock(priv, &flags);
+	return ret;
+}
+
+static int orinoco_ioctl_set_genie(struct net_device *dev,
+				   struct iw_request_info *info,
+				   union iwreq_data *wrqu, char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	u8 *buf;
+	unsigned long flags;
+	int err = 0;
+
+	/* cut off at IEEE80211_MAX_DATA_LEN */
+	if ((wrqu->data.length > IEEE80211_MAX_DATA_LEN) ||
+	    (wrqu->data.length && (extra == NULL)))
+		return -EINVAL;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	if (wrqu->data.length) {
+		buf = kmalloc(wrqu->data.length, GFP_KERNEL);
+		if (buf == NULL) {
+			err = -ENOMEM;
+			goto out;
+		}
+
+		memcpy(buf, extra, wrqu->data.length);
+		kfree(priv->wpa_ie);
+		priv->wpa_ie = buf;
+		priv->wpa_ie_len = wrqu->data.length;
+	} else {
+		kfree(priv->wpa_ie);
+		priv->wpa_ie = NULL;
+		priv->wpa_ie_len = 0;
+	}
+
+	if (priv->wpa_ie) {
+		/* Looks like wl_lkm wants to check the auth alg, and
+		 * somehow pass it to the firmware.
+		 * Instead it just calls the key mgmt rid
+		 *   - we do this in set auth.
+		 */
+	}
+
+out:
+	orinoco_unlock(priv, &flags);
+	return err;
+}
+
+static int orinoco_ioctl_get_genie(struct net_device *dev,
+				   struct iw_request_info *info,
+				   union iwreq_data *wrqu, char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	unsigned long flags;
+	int err = 0;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	if ((priv->wpa_ie_len == 0) || (priv->wpa_ie == NULL)) {
+		wrqu->data.length = 0;
+		goto out;
+	}
+
+	if (wrqu->data.length < priv->wpa_ie_len) {
+		err = -E2BIG;
+		goto out;
+	}
+
+	wrqu->data.length = priv->wpa_ie_len;
+	memcpy(extra, priv->wpa_ie, priv->wpa_ie_len);
+
+out:
+	orinoco_unlock(priv, &flags);
+	return err;
+}
+
+static int orinoco_ioctl_set_mlme(struct net_device *dev,
+				  struct iw_request_info *info,
+				  union iwreq_data *wrqu, char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	hermes_t *hw = &priv->hw;
+	struct iw_mlme *mlme = (struct iw_mlme *)extra;
+	unsigned long flags;
+	int ret = 0;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	switch (mlme->cmd) {
+	case IW_MLME_DEAUTH:
+		/* silently ignore */
+		break;
+
+	case IW_MLME_DISASSOC:
+	{
+		struct {
+			u8 addr[ETH_ALEN];
+			__le16 reason_code;
+		} __attribute__ ((packed)) buf;
+
+		memcpy(buf.addr, mlme->addr.sa_data, ETH_ALEN);
+		buf.reason_code = cpu_to_le16(mlme->reason_code);
+		ret = HERMES_WRITE_RECORD(hw, USER_BAP,
+					  HERMES_RID_CNFDISASSOCIATE,
+					  &buf);
+		break;
+	}
+	default:
+		ret = -EOPNOTSUPP;
+	}
+
+	orinoco_unlock(priv, &flags);
+	return ret;
+}
+
+static int orinoco_ioctl_getretry(struct net_device *dev,
+				  struct iw_request_info *info,
+				  struct iw_param *rrq,
+				  char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	hermes_t *hw = &priv->hw;
+	int err = 0;
+	u16 short_limit, long_limit, lifetime;
+	unsigned long flags;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+	
+	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT,
+				  &short_limit);
+	if (err)
+		goto out;
+
+	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT,
+				  &long_limit);
+	if (err)
+		goto out;
+
+	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME,
+				  &lifetime);
+	if (err)
+		goto out;
+
+	rrq->disabled = 0;		/* Can't be disabled */
+
+	/* Note : by default, display the retry number */
+	if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) {
+		rrq->flags = IW_RETRY_LIFETIME;
+		rrq->value = lifetime * 1000;	/* ??? */
+	} else {
+		/* By default, display the min number */
+		if ((rrq->flags & IW_RETRY_LONG)) {
+			rrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG;
+			rrq->value = long_limit;
+		} else {
+			rrq->flags = IW_RETRY_LIMIT;
+			rrq->value = short_limit;
+			if(short_limit != long_limit)
+				rrq->flags |= IW_RETRY_SHORT;
+		}
+	}
+
+ out:
+	orinoco_unlock(priv, &flags);
+
+	return err;
+}
+
+static int orinoco_ioctl_reset(struct net_device *dev,
+			       struct iw_request_info *info,
+			       void *wrqu,
+			       char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+
+	if (! capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	if (info->cmd == (SIOCIWFIRSTPRIV + 0x1)) {
+		printk(KERN_DEBUG "%s: Forcing reset!\n", dev->name);
+
+		/* Firmware reset */
+		orinoco_reset(&priv->reset_work);
+	} else {
+		printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name);
+
+		schedule_work(&priv->reset_work);
+	}
+
+	return 0;
+}
+
+static int orinoco_ioctl_setibssport(struct net_device *dev,
+				     struct iw_request_info *info,
+				     void *wrqu,
+				     char *extra)
+
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	int val = *( (int *) extra );
+	unsigned long flags;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	priv->ibss_port = val ;
+
+	/* Actually update the mode we are using */
+	set_port_type(priv);
+
+	orinoco_unlock(priv, &flags);
+	return -EINPROGRESS;		/* Call commit handler */
+}
+
+static int orinoco_ioctl_getibssport(struct net_device *dev,
+				     struct iw_request_info *info,
+				     void *wrqu,
+				     char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	int *val = (int *) extra;
+
+	*val = priv->ibss_port;
+	return 0;
+}
+
+static int orinoco_ioctl_setport3(struct net_device *dev,
+				  struct iw_request_info *info,
+				  void *wrqu,
+				  char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	int val = *( (int *) extra );
+	int err = 0;
+	unsigned long flags;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	switch (val) {
+	case 0: /* Try to do IEEE ad-hoc mode */
+		if (! priv->has_ibss) {
+			err = -EINVAL;
+			break;
+		}
+		priv->prefer_port3 = 0;
+			
+		break;
+
+	case 1: /* Try to do Lucent proprietary ad-hoc mode */
+		if (! priv->has_port3) {
+			err = -EINVAL;
+			break;
+		}
+		priv->prefer_port3 = 1;
+		break;
+
+	default:
+		err = -EINVAL;
+	}
+
+	if (! err) {
+		/* Actually update the mode we are using */
+		set_port_type(priv);
+		err = -EINPROGRESS;
+	}
+
+	orinoco_unlock(priv, &flags);
+
+	return err;
+}
+
+static int orinoco_ioctl_getport3(struct net_device *dev,
+				  struct iw_request_info *info,
+				  void *wrqu,
+				  char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	int *val = (int *) extra;
+
+	*val = priv->prefer_port3;
+	return 0;
+}
+
+static int orinoco_ioctl_setpreamble(struct net_device *dev,
+				     struct iw_request_info *info,
+				     void *wrqu,
+				     char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	unsigned long flags;
+	int val;
+
+	if (! priv->has_preamble)
+		return -EOPNOTSUPP;
+
+	/* 802.11b has recently defined some short preamble.
+	 * Basically, the Phy header has been reduced in size.
+	 * This increase performance, especially at high rates
+	 * (the preamble is transmitted at 1Mb/s), unfortunately
+	 * this give compatibility troubles... - Jean II */
+	val = *( (int *) extra );
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	if (val)
+		priv->preamble = 1;
+	else
+		priv->preamble = 0;
+
+	orinoco_unlock(priv, &flags);
+
+	return -EINPROGRESS;		/* Call commit handler */
+}
+
+static int orinoco_ioctl_getpreamble(struct net_device *dev,
+				     struct iw_request_info *info,
+				     void *wrqu,
+				     char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	int *val = (int *) extra;
+
+	if (! priv->has_preamble)
+		return -EOPNOTSUPP;
+
+	*val = priv->preamble;
+	return 0;
+}
+
+/* ioctl interface to hermes_read_ltv()
+ * To use with iwpriv, pass the RID as the token argument, e.g.
+ * iwpriv get_rid [0xfc00]
+ * At least Wireless Tools 25 is required to use iwpriv.
+ * For Wireless Tools 25 and 26 append "dummy" are the end. */
+static int orinoco_ioctl_getrid(struct net_device *dev,
+				struct iw_request_info *info,
+				struct iw_point *data,
+				char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	hermes_t *hw = &priv->hw;
+	int rid = data->flags;
+	u16 length;
+	int err;
+	unsigned long flags;
+
+	/* It's a "get" function, but we don't want users to access the
+	 * WEP key and other raw firmware data */
+	if (! capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	if (rid < 0xfc00 || rid > 0xffff)
+		return -EINVAL;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	err = hermes_read_ltv(hw, USER_BAP, rid, MAX_RID_LEN, &length,
+			      extra);
+	if (err)
+		goto out;
+
+	data->length = min_t(u16, HERMES_RECLEN_TO_BYTES(length),
+			     MAX_RID_LEN);
+
+ out:
+	orinoco_unlock(priv, &flags);
+	return err;
+}
+
+/* Trigger a scan (look for other cells in the vicinity) */
+static int orinoco_ioctl_setscan(struct net_device *dev,
+				 struct iw_request_info *info,
+				 struct iw_point *srq,
+				 char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	hermes_t *hw = &priv->hw;
+	struct iw_scan_req *si = (struct iw_scan_req *) extra;
+	int err = 0;
+	unsigned long flags;
+
+	/* Note : you may have realised that, as this is a SET operation,
+	 * this is privileged and therefore a normal user can't
+	 * perform scanning.
+	 * This is not an error, while the device perform scanning,
+	 * traffic doesn't flow, so it's a perfect DoS...
+	 * Jean II */
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	/* Scanning with port 0 disabled would fail */
+	if (!netif_running(dev)) {
+		err = -ENETDOWN;
+		goto out;
+	}
+
+	/* In monitor mode, the scan results are always empty.
+	 * Probe responses are passed to the driver as received
+	 * frames and could be processed in software. */
+	if (priv->iw_mode == IW_MODE_MONITOR) {
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
+	/* Note : because we don't lock out the irq handler, the way
+	 * we access scan variables in priv is critical.
+	 *	o scan_inprogress : not touched by irq handler
+	 *	o scan_mode : not touched by irq handler
+	 * Before modifying anything on those variables, please think hard !
+	 * Jean II */
+
+	/* Save flags */
+	priv->scan_mode = srq->flags;
+
+	/* Always trigger scanning, even if it's in progress.
+	 * This way, if the info frame get lost, we will recover somewhat
+	 * gracefully  - Jean II */
+
+	if (priv->has_hostscan) {
+		switch (priv->firmware_type) {
+		case FIRMWARE_TYPE_SYMBOL:
+			err = hermes_write_wordrec(hw, USER_BAP,
+						   HERMES_RID_CNFHOSTSCAN_SYMBOL,
+						   HERMES_HOSTSCAN_SYMBOL_ONCE |
+						   HERMES_HOSTSCAN_SYMBOL_BCAST);
+			break;
+		case FIRMWARE_TYPE_INTERSIL: {
+			__le16 req[3];
+
+			req[0] = cpu_to_le16(0x3fff);	/* All channels */
+			req[1] = cpu_to_le16(0x0001);	/* rate 1 Mbps */
+			req[2] = 0;			/* Any ESSID */
+			err = HERMES_WRITE_RECORD(hw, USER_BAP,
+						  HERMES_RID_CNFHOSTSCAN, &req);
+		}
+		break;
+		case FIRMWARE_TYPE_AGERE:
+			if (priv->scan_mode & IW_SCAN_THIS_ESSID) {
+				struct hermes_idstring idbuf;
+				size_t len = min(sizeof(idbuf.val),
+						 (size_t) si->essid_len);
+				idbuf.len = cpu_to_le16(len);
+				memcpy(idbuf.val, si->essid, len);
+
+				err = hermes_write_ltv(hw, USER_BAP,
+					       HERMES_RID_CNFSCANSSID_AGERE,
+					       HERMES_BYTES_TO_RECLEN(len + 2),
+					       &idbuf);
+			} else
+				err = hermes_write_wordrec(hw, USER_BAP,
+						   HERMES_RID_CNFSCANSSID_AGERE,
+						   0);	/* Any ESSID */
+			if (err)
+				break;
+
+			if (priv->has_ext_scan) {
+				/* Clear scan results at the start of
+				 * an extended scan */
+				orinoco_clear_scan_results(priv,
+						msecs_to_jiffies(15000));
+
+				/* TODO: Is this available on older firmware?
+				 *   Can we use it to scan specific channels
+				 *   for IW_SCAN_THIS_FREQ? */
+				err = hermes_write_wordrec(hw, USER_BAP,
+						HERMES_RID_CNFSCANCHANNELS2GHZ,
+						0x7FFF);
+				if (err)
+					goto out;
+
+				err = hermes_inquire(hw,
+						     HERMES_INQ_CHANNELINFO);
+			} else
+				err = hermes_inquire(hw, HERMES_INQ_SCAN);
+			break;
+		}
+	} else
+		err = hermes_inquire(hw, HERMES_INQ_SCAN);
+
+	/* One more client */
+	if (! err)
+		priv->scan_inprogress = 1;
+
+ out:
+	orinoco_unlock(priv, &flags);
+	return err;
+}
+
+#define MAX_CUSTOM_LEN 64
+
+/* Translate scan data returned from the card to a card independant
+ * format that the Wireless Tools will understand - Jean II */
+static inline char *orinoco_translate_scan(struct net_device *dev,
+					   struct iw_request_info *info,
+					   char *current_ev,
+					   char *end_buf,
+					   union hermes_scan_info *bss,
+					   unsigned int last_scanned)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	u16			capabilities;
+	u16			channel;
+	struct iw_event		iwe;		/* Temporary buffer */
+	char custom[MAX_CUSTOM_LEN];
+
+	memset(&iwe, 0, sizeof(iwe));
+
+	/* First entry *MUST* be the AP MAC address */
+	iwe.cmd = SIOCGIWAP;
+	iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
+	memcpy(iwe.u.ap_addr.sa_data, bss->a.bssid, ETH_ALEN);
+	current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+					  &iwe, IW_EV_ADDR_LEN);
+
+	/* Other entries will be displayed in the order we give them */
+
+	/* Add the ESSID */
+	iwe.u.data.length = le16_to_cpu(bss->a.essid_len);
+	if (iwe.u.data.length > 32)
+		iwe.u.data.length = 32;
+	iwe.cmd = SIOCGIWESSID;
+	iwe.u.data.flags = 1;
+	current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+					  &iwe, bss->a.essid);
+
+	/* Add mode */
+	iwe.cmd = SIOCGIWMODE;
+	capabilities = le16_to_cpu(bss->a.capabilities);
+	if (capabilities & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) {
+		if (capabilities & WLAN_CAPABILITY_ESS)
+			iwe.u.mode = IW_MODE_MASTER;
+		else
+			iwe.u.mode = IW_MODE_ADHOC;
+		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+						  &iwe, IW_EV_UINT_LEN);
+	}
+
+	channel = bss->s.channel;
+	if ((channel >= 1) && (channel <= NUM_CHANNELS)) {
+		/* Add channel and frequency */
+		iwe.cmd = SIOCGIWFREQ;
+		iwe.u.freq.m = channel;
+		iwe.u.freq.e = 0;
+		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+						  &iwe, IW_EV_FREQ_LEN);
+
+		iwe.u.freq.m = channel_frequency[channel-1] * 100000;
+		iwe.u.freq.e = 1;
+		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+						  &iwe, IW_EV_FREQ_LEN);
+	}
+
+	/* Add quality statistics. level and noise in dB. No link quality */
+	iwe.cmd = IWEVQUAL;
+	iwe.u.qual.updated = IW_QUAL_DBM | IW_QUAL_QUAL_INVALID;
+	iwe.u.qual.level = (__u8) le16_to_cpu(bss->a.level) - 0x95;
+	iwe.u.qual.noise = (__u8) le16_to_cpu(bss->a.noise) - 0x95;
+	/* Wireless tools prior to 27.pre22 will show link quality
+	 * anyway, so we provide a reasonable value. */
+	if (iwe.u.qual.level > iwe.u.qual.noise)
+		iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise;
+	else
+		iwe.u.qual.qual = 0;
+	current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+					  &iwe, IW_EV_QUAL_LEN);
+
+	/* Add encryption capability */
+	iwe.cmd = SIOCGIWENCODE;
+	if (capabilities & WLAN_CAPABILITY_PRIVACY)
+		iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+	else
+		iwe.u.data.flags = IW_ENCODE_DISABLED;
+	iwe.u.data.length = 0;
+	current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+					  &iwe, NULL);
+
+	/* Bit rate is not available in Lucent/Agere firmwares */
+	if (priv->firmware_type != FIRMWARE_TYPE_AGERE) {
+		char *current_val = current_ev + iwe_stream_lcp_len(info);
+		int i;
+		int step;
+
+		if (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)
+			step = 2;
+		else
+			step = 1;
+
+		iwe.cmd = SIOCGIWRATE;
+		/* Those two flags are ignored... */
+		iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
+		/* Max 10 values */
+		for (i = 0; i < 10; i += step) {
+			/* NULL terminated */
+			if (bss->p.rates[i] == 0x0)
+				break;
+			/* Bit rate given in 500 kb/s units (+ 0x80) */
+			iwe.u.bitrate.value =
+				((bss->p.rates[i] & 0x7f) * 500000);
+			current_val = iwe_stream_add_value(info, current_ev,
+							   current_val,
+							   end_buf, &iwe,
+							   IW_EV_PARAM_LEN);
+		}
+		/* Check if we added any event */
+		if ((current_val - current_ev) > iwe_stream_lcp_len(info))
+			current_ev = current_val;
+	}
+
+	/* Beacon interval */
+	iwe.cmd = IWEVCUSTOM;
+	iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
+				     "bcn_int=%d",
+				     le16_to_cpu(bss->a.beacon_interv));
+	if (iwe.u.data.length)
+		current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+						  &iwe, custom);
+
+	/* Capabilites */
+	iwe.cmd = IWEVCUSTOM;
+	iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
+				     "capab=0x%04x",
+				     capabilities);
+	if (iwe.u.data.length)
+		current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+						  &iwe, custom);
+
+	/* Add EXTRA: Age to display seconds since last beacon/probe response
+	 * for given network. */
+	iwe.cmd = IWEVCUSTOM;
+	iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
+				     " Last beacon: %dms ago",
+				     jiffies_to_msecs(jiffies - last_scanned));
+	if (iwe.u.data.length)
+		current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+						  &iwe, custom);
+
+	return current_ev;
+}
+
+static inline char *orinoco_translate_ext_scan(struct net_device *dev,
+					       struct iw_request_info *info,
+					       char *current_ev,
+					       char *end_buf,
+					       struct agere_ext_scan_info *bss,
+					       unsigned int last_scanned)
+{
+	u16			capabilities;
+	u16			channel;
+	struct iw_event		iwe;		/* Temporary buffer */
+	char custom[MAX_CUSTOM_LEN];
+	u8 *ie;
+
+	memset(&iwe, 0, sizeof(iwe));
+
+	/* First entry *MUST* be the AP MAC address */
+	iwe.cmd = SIOCGIWAP;
+	iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
+	memcpy(iwe.u.ap_addr.sa_data, bss->bssid, ETH_ALEN);
+	current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+					  &iwe, IW_EV_ADDR_LEN);
+
+	/* Other entries will be displayed in the order we give them */
+
+	/* Add the ESSID */
+	ie = bss->data;
+	iwe.u.data.length = ie[1];
+	if (iwe.u.data.length) {
+		if (iwe.u.data.length > 32)
+			iwe.u.data.length = 32;
+		iwe.cmd = SIOCGIWESSID;
+		iwe.u.data.flags = 1;
+		current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+						  &iwe, &ie[2]);
+	}
+
+	/* Add mode */
+	capabilities = le16_to_cpu(bss->capabilities);
+	if (capabilities & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) {
+		iwe.cmd = SIOCGIWMODE;
+		if (capabilities & WLAN_CAPABILITY_ESS)
+			iwe.u.mode = IW_MODE_MASTER;
+		else
+			iwe.u.mode = IW_MODE_ADHOC;
+		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+						  &iwe, IW_EV_UINT_LEN);
+	}
+
+	ie = orinoco_get_ie(bss->data, sizeof(bss->data), WLAN_EID_DS_PARAMS);
+	channel = ie ? ie[2] : 0;
+	if ((channel >= 1) && (channel <= NUM_CHANNELS)) {
+		/* Add channel and frequency */
+		iwe.cmd = SIOCGIWFREQ;
+		iwe.u.freq.m = channel;
+		iwe.u.freq.e = 0;
+		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+						  &iwe, IW_EV_FREQ_LEN);
+
+		iwe.u.freq.m = channel_frequency[channel-1] * 100000;
+		iwe.u.freq.e = 1;
+		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+						  &iwe, IW_EV_FREQ_LEN);
+	}
+
+	/* Add quality statistics. level and noise in dB. No link quality */
+	iwe.cmd = IWEVQUAL;
+	iwe.u.qual.updated = IW_QUAL_DBM | IW_QUAL_QUAL_INVALID;
+	iwe.u.qual.level = bss->level - 0x95;
+	iwe.u.qual.noise = bss->noise - 0x95;
+	/* Wireless tools prior to 27.pre22 will show link quality
+	 * anyway, so we provide a reasonable value. */
+	if (iwe.u.qual.level > iwe.u.qual.noise)
+		iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise;
+	else
+		iwe.u.qual.qual = 0;
+	current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+					  &iwe, IW_EV_QUAL_LEN);
+
+	/* Add encryption capability */
+	iwe.cmd = SIOCGIWENCODE;
+	if (capabilities & WLAN_CAPABILITY_PRIVACY)
+		iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+	else
+		iwe.u.data.flags = IW_ENCODE_DISABLED;
+	iwe.u.data.length = 0;
+	current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+					  &iwe, NULL);
+
+	/* WPA IE */
+	ie = orinoco_get_wpa_ie(bss->data, sizeof(bss->data));
+	if (ie) {
+		iwe.cmd = IWEVGENIE;
+		iwe.u.data.length = ie[1] + 2;
+		current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+						  &iwe, ie);
+	}
+
+	/* RSN IE */
+	ie = orinoco_get_ie(bss->data, sizeof(bss->data), WLAN_EID_RSN);
+	if (ie) {
+		iwe.cmd = IWEVGENIE;
+		iwe.u.data.length = ie[1] + 2;
+		current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+						  &iwe, ie);
+	}
+
+	ie = orinoco_get_ie(bss->data, sizeof(bss->data), WLAN_EID_SUPP_RATES);
+	if (ie) {
+		char *p = current_ev + iwe_stream_lcp_len(info);
+		int i;
+
+		iwe.cmd = SIOCGIWRATE;
+		/* Those two flags are ignored... */
+		iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
+
+		for (i = 2; i < (ie[1] + 2); i++) {
+			iwe.u.bitrate.value = ((ie[i] & 0x7F) * 500000);
+			p = iwe_stream_add_value(info, current_ev, p, end_buf,
+						 &iwe, IW_EV_PARAM_LEN);
+		}
+		/* Check if we added any event */
+		if (p > (current_ev + iwe_stream_lcp_len(info)))
+			current_ev = p;
+	}
+
+	/* Timestamp */
+	iwe.cmd = IWEVCUSTOM;
+	iwe.u.data.length =
+		snprintf(custom, MAX_CUSTOM_LEN, "tsf=%016llx",
+			 (unsigned long long) le64_to_cpu(bss->timestamp));
+	if (iwe.u.data.length)
+		current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+						  &iwe, custom);
+
+	/* Beacon interval */
+	iwe.cmd = IWEVCUSTOM;
+	iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
+				     "bcn_int=%d",
+				     le16_to_cpu(bss->beacon_interval));
+	if (iwe.u.data.length)
+		current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+						  &iwe, custom);
+
+	/* Capabilites */
+	iwe.cmd = IWEVCUSTOM;
+	iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
+				     "capab=0x%04x",
+				     capabilities);
+	if (iwe.u.data.length)
+		current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+						  &iwe, custom);
+
+	/* Add EXTRA: Age to display seconds since last beacon/probe response
+	 * for given network. */
+	iwe.cmd = IWEVCUSTOM;
+	iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
+				     " Last beacon: %dms ago",
+				     jiffies_to_msecs(jiffies - last_scanned));
+	if (iwe.u.data.length)
+		current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+						  &iwe, custom);
+
+	return current_ev;
+}
+
+/* Return results of a scan */
+static int orinoco_ioctl_getscan(struct net_device *dev,
+				 struct iw_request_info *info,
+				 struct iw_point *srq,
+				 char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	int err = 0;
+	unsigned long flags;
+	char *current_ev = extra;
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return -EBUSY;
+
+	if (priv->scan_inprogress) {
+		/* Important note : we don't want to block the caller
+		 * until results are ready for various reasons.
+		 * First, managing wait queues is complex and racy.
+		 * Second, we grab some rtnetlink lock before comming
+		 * here (in dev_ioctl()).
+		 * Third, we generate an Wireless Event, so the
+		 * caller can wait itself on that - Jean II */
+		err = -EAGAIN;
+		goto out;
+	}
+
+	if (priv->has_ext_scan) {
+		struct xbss_element *bss;
+
+		list_for_each_entry(bss, &priv->bss_list, list) {
+			/* Translate this entry to WE format */
+			current_ev =
+				orinoco_translate_ext_scan(dev, info,
+							   current_ev,
+							   extra + srq->length,
+							   &bss->bss,
+							   bss->last_scanned);
+
+			/* Check if there is space for one more entry */
+			if ((extra + srq->length - current_ev)
+			    <= IW_EV_ADDR_LEN) {
+				/* Ask user space to try again with a
+				 * bigger buffer */
+				err = -E2BIG;
+				goto out;
+			}
+		}
+
+	} else {
+		struct bss_element *bss;
+
+		list_for_each_entry(bss, &priv->bss_list, list) {
+			/* Translate this entry to WE format */
+			current_ev = orinoco_translate_scan(dev, info,
+							    current_ev,
+							    extra + srq->length,
+							    &bss->bss,
+							    bss->last_scanned);
+
+			/* Check if there is space for one more entry */
+			if ((extra + srq->length - current_ev)
+			    <= IW_EV_ADDR_LEN) {
+				/* Ask user space to try again with a
+				 * bigger buffer */
+				err = -E2BIG;
+				goto out;
+			}
+		}
+	}
+
+	srq->length = (current_ev - extra);
+	srq->flags = (__u16) priv->scan_mode;
+
+out:
+	orinoco_unlock(priv, &flags);
+	return err;
+}
+
+/* Commit handler, called after set operations */
+static int orinoco_ioctl_commit(struct net_device *dev,
+				struct iw_request_info *info,
+				void *wrqu,
+				char *extra)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct hermes *hw = &priv->hw;
+	unsigned long flags;
+	int err = 0;
+
+	if (!priv->open)
+		return 0;
+
+	if (priv->broken_disableport) {
+		orinoco_reset(&priv->reset_work);
+		return 0;
+	}
+
+	if (orinoco_lock(priv, &flags) != 0)
+		return err;
+
+	err = hermes_disable_port(hw, 0);
+	if (err) {
+		printk(KERN_WARNING "%s: Unable to disable port "
+		       "while reconfiguring card\n", dev->name);
+		priv->broken_disableport = 1;
+		goto out;
+	}
+
+	err = __orinoco_program_rids(dev);
+	if (err) {
+		printk(KERN_WARNING "%s: Unable to reconfigure card\n",
+		       dev->name);
+		goto out;
+	}
+
+	err = hermes_enable_port(hw, 0);
+	if (err) {
+		printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n",
+		       dev->name);
+		goto out;
+	}
+
+ out:
+	if (err) {
+		printk(KERN_WARNING "%s: Resetting instead...\n", dev->name);
+		schedule_work(&priv->reset_work);
+		err = 0;
+	}
+
+	orinoco_unlock(priv, &flags);
+	return err;
+}
+
+static const struct iw_priv_args orinoco_privtab[] = {
+	{ SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" },
+	{ SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" },
+	{ SIOCIWFIRSTPRIV + 0x2, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+	  0, "set_port3" },
+	{ SIOCIWFIRSTPRIV + 0x3, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+	  "get_port3" },
+	{ SIOCIWFIRSTPRIV + 0x4, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+	  0, "set_preamble" },
+	{ SIOCIWFIRSTPRIV + 0x5, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+	  "get_preamble" },
+	{ SIOCIWFIRSTPRIV + 0x6, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+	  0, "set_ibssport" },
+	{ SIOCIWFIRSTPRIV + 0x7, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+	  "get_ibssport" },
+	{ SIOCIWFIRSTPRIV + 0x9, 0, IW_PRIV_TYPE_BYTE | MAX_RID_LEN,
+	  "get_rid" },
+};
+
+
+/*
+ * Structures to export the Wireless Handlers
+ */
+
+#define STD_IW_HANDLER(id, func) \
+	[IW_IOCTL_IDX(id)] = (iw_handler) func
+static const iw_handler	orinoco_handler[] = {
+	STD_IW_HANDLER(SIOCSIWCOMMIT,	orinoco_ioctl_commit),
+	STD_IW_HANDLER(SIOCGIWNAME,	orinoco_ioctl_getname),
+	STD_IW_HANDLER(SIOCSIWFREQ,	orinoco_ioctl_setfreq),
+	STD_IW_HANDLER(SIOCGIWFREQ,	orinoco_ioctl_getfreq),
+	STD_IW_HANDLER(SIOCSIWMODE,	orinoco_ioctl_setmode),
+	STD_IW_HANDLER(SIOCGIWMODE,	orinoco_ioctl_getmode),
+	STD_IW_HANDLER(SIOCSIWSENS,	orinoco_ioctl_setsens),
+	STD_IW_HANDLER(SIOCGIWSENS,	orinoco_ioctl_getsens),
+	STD_IW_HANDLER(SIOCGIWRANGE,	orinoco_ioctl_getiwrange),
+	STD_IW_HANDLER(SIOCSIWSPY,	iw_handler_set_spy),
+	STD_IW_HANDLER(SIOCGIWSPY,	iw_handler_get_spy),
+	STD_IW_HANDLER(SIOCSIWTHRSPY,	iw_handler_set_thrspy),
+	STD_IW_HANDLER(SIOCGIWTHRSPY,	iw_handler_get_thrspy),
+	STD_IW_HANDLER(SIOCSIWAP,	orinoco_ioctl_setwap),
+	STD_IW_HANDLER(SIOCGIWAP,	orinoco_ioctl_getwap),
+	STD_IW_HANDLER(SIOCSIWSCAN,	orinoco_ioctl_setscan),
+	STD_IW_HANDLER(SIOCGIWSCAN,	orinoco_ioctl_getscan),
+	STD_IW_HANDLER(SIOCSIWESSID,	orinoco_ioctl_setessid),
+	STD_IW_HANDLER(SIOCGIWESSID,	orinoco_ioctl_getessid),
+	STD_IW_HANDLER(SIOCSIWNICKN,	orinoco_ioctl_setnick),
+	STD_IW_HANDLER(SIOCGIWNICKN,	orinoco_ioctl_getnick),
+	STD_IW_HANDLER(SIOCSIWRATE,	orinoco_ioctl_setrate),
+	STD_IW_HANDLER(SIOCGIWRATE,	orinoco_ioctl_getrate),
+	STD_IW_HANDLER(SIOCSIWRTS,	orinoco_ioctl_setrts),
+	STD_IW_HANDLER(SIOCGIWRTS,	orinoco_ioctl_getrts),
+	STD_IW_HANDLER(SIOCSIWFRAG,	orinoco_ioctl_setfrag),
+	STD_IW_HANDLER(SIOCGIWFRAG,	orinoco_ioctl_getfrag),
+	STD_IW_HANDLER(SIOCGIWRETRY,	orinoco_ioctl_getretry),
+	STD_IW_HANDLER(SIOCSIWENCODE,	orinoco_ioctl_setiwencode),
+	STD_IW_HANDLER(SIOCGIWENCODE,	orinoco_ioctl_getiwencode),
+	STD_IW_HANDLER(SIOCSIWPOWER,	orinoco_ioctl_setpower),
+	STD_IW_HANDLER(SIOCGIWPOWER,	orinoco_ioctl_getpower),
+	STD_IW_HANDLER(SIOCSIWGENIE,	orinoco_ioctl_set_genie),
+	STD_IW_HANDLER(SIOCGIWGENIE,	orinoco_ioctl_get_genie),
+	STD_IW_HANDLER(SIOCSIWMLME,	orinoco_ioctl_set_mlme),
+	STD_IW_HANDLER(SIOCSIWAUTH,	orinoco_ioctl_set_auth),
+	STD_IW_HANDLER(SIOCGIWAUTH,	orinoco_ioctl_get_auth),
+	STD_IW_HANDLER(SIOCSIWENCODEEXT, orinoco_ioctl_set_encodeext),
+	STD_IW_HANDLER(SIOCGIWENCODEEXT, orinoco_ioctl_get_encodeext),
+};
+
+
+/*
+  Added typecasting since we no longer use iwreq_data -- Moustafa
+ */
+static const iw_handler	orinoco_private_handler[] = {
+	[0] = (iw_handler) orinoco_ioctl_reset,
+	[1] = (iw_handler) orinoco_ioctl_reset,
+	[2] = (iw_handler) orinoco_ioctl_setport3,
+	[3] = (iw_handler) orinoco_ioctl_getport3,
+	[4] = (iw_handler) orinoco_ioctl_setpreamble,
+	[5] = (iw_handler) orinoco_ioctl_getpreamble,
+	[6] = (iw_handler) orinoco_ioctl_setibssport,
+	[7] = (iw_handler) orinoco_ioctl_getibssport,
+	[9] = (iw_handler) orinoco_ioctl_getrid,
+};
+
+static const struct iw_handler_def orinoco_handler_def = {
+	.num_standard = ARRAY_SIZE(orinoco_handler),
+	.num_private = ARRAY_SIZE(orinoco_private_handler),
+	.num_private_args = ARRAY_SIZE(orinoco_privtab),
+	.standard = orinoco_handler,
+	.private = orinoco_private_handler,
+	.private_args = orinoco_privtab,
+	.get_wireless_stats = orinoco_get_wireless_stats,
+};
+
+static void orinoco_get_drvinfo(struct net_device *dev,
+				struct ethtool_drvinfo *info)
+{
+	struct orinoco_private *priv = netdev_priv(dev);
+
+	strncpy(info->driver, DRIVER_NAME, sizeof(info->driver) - 1);
+	strncpy(info->version, DRIVER_VERSION, sizeof(info->version) - 1);
+	strncpy(info->fw_version, priv->fw_name, sizeof(info->fw_version) - 1);
+	if (dev->dev.parent)
+		strncpy(info->bus_info, dev->dev.parent->bus_id,
+			sizeof(info->bus_info) - 1);
+	else
+		snprintf(info->bus_info, sizeof(info->bus_info) - 1,
+			 "PCMCIA %p", priv->hw.iobase);
+}
+
+static const struct ethtool_ops orinoco_ethtool_ops = {
+	.get_drvinfo = orinoco_get_drvinfo,
+	.get_link = ethtool_op_get_link,
+};
+
+/********************************************************************/
+/* Module initialization                                            */
+/********************************************************************/
+
+EXPORT_SYMBOL(alloc_orinocodev);
+EXPORT_SYMBOL(free_orinocodev);
+
+EXPORT_SYMBOL(__orinoco_up);
+EXPORT_SYMBOL(__orinoco_down);
+EXPORT_SYMBOL(orinoco_reinit_firmware);
+
+EXPORT_SYMBOL(orinoco_interrupt);
+
+/* Can't be declared "const" or the whole __initdata section will
+ * become const */
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+	" (David Gibson <hermes@gibson.dropbear.id.au>, "
+	"Pavel Roskin <proski@gnu.org>, et al)";
+
+static int __init init_orinoco(void)
+{
+	printk(KERN_DEBUG "%s\n", version);
+	return 0;
+}
+
+static void __exit exit_orinoco(void)
+{
+}
+
+module_init(init_orinoco);
+module_exit(exit_orinoco);
diff --git a/drivers/net/wireless/orinoco/orinoco.h b/drivers/net/wireless/orinoco/orinoco.h
new file mode 100644
index 00000000000..8c295383492
--- /dev/null
+++ b/drivers/net/wireless/orinoco/orinoco.h
@@ -0,0 +1,218 @@
+/* orinoco.h
+ * 
+ * Common definitions to all pieces of the various orinoco
+ * drivers
+ */
+
+#ifndef _ORINOCO_H
+#define _ORINOCO_H
+
+#define DRIVER_VERSION "0.15"
+
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <net/iw_handler.h>
+
+#include "hermes.h"
+
+/* To enable debug messages */
+//#define ORINOCO_DEBUG		3
+
+#define WIRELESS_SPY		// enable iwspy support
+
+#define MAX_SCAN_LEN		4096
+
+#define ORINOCO_MAX_KEY_SIZE	14
+#define ORINOCO_MAX_KEYS	4
+
+struct orinoco_key {
+	__le16 len;	/* always stored as little-endian */
+	char data[ORINOCO_MAX_KEY_SIZE];
+} __attribute__ ((packed));
+
+#define TKIP_KEYLEN	16
+#define MIC_KEYLEN	8
+
+struct orinoco_tkip_key {
+	u8 tkip[TKIP_KEYLEN];
+	u8 tx_mic[MIC_KEYLEN];
+	u8 rx_mic[MIC_KEYLEN];
+};
+
+typedef enum {
+	FIRMWARE_TYPE_AGERE,
+	FIRMWARE_TYPE_INTERSIL,
+	FIRMWARE_TYPE_SYMBOL
+} fwtype_t;
+
+struct bss_element {
+	union hermes_scan_info bss;
+	unsigned long last_scanned;
+	struct list_head list;
+};
+
+struct xbss_element {
+	struct agere_ext_scan_info bss;
+	unsigned long last_scanned;
+	struct list_head list;
+};
+
+struct hermes_rx_descriptor;
+
+struct orinoco_rx_data {
+	struct hermes_rx_descriptor *desc;
+	struct sk_buff *skb;
+	struct list_head list;
+};
+
+struct firmware;
+
+struct orinoco_private {
+	void *card;	/* Pointer to card dependent structure */
+	struct device *dev;
+	int (*hard_reset)(struct orinoco_private *);
+	int (*stop_fw)(struct orinoco_private *, int);
+
+	/* Synchronisation stuff */
+	spinlock_t lock;
+	int hw_unavailable;
+	struct work_struct reset_work;
+
+	/* Interrupt tasklets */
+	struct tasklet_struct rx_tasklet;
+	struct list_head rx_list;
+	struct orinoco_rx_data *rx_data;
+
+	/* driver state */
+	int open;
+	u16 last_linkstatus;
+	struct work_struct join_work;
+	struct work_struct wevent_work;
+
+	/* Net device stuff */
+	struct net_device *ndev;
+	struct net_device_stats stats;
+	struct iw_statistics wstats;
+
+	/* Hardware control variables */
+	hermes_t hw;
+	u16 txfid;
+
+	/* Capabilities of the hardware/firmware */
+	fwtype_t firmware_type;
+	char fw_name[32];
+	int ibss_port;
+	int nicbuf_size;
+	u16 channel_mask;
+
+	/* Boolean capabilities */
+	unsigned int has_ibss:1;
+	unsigned int has_port3:1;
+	unsigned int has_wep:1;
+	unsigned int has_big_wep:1;
+	unsigned int has_mwo:1;
+	unsigned int has_pm:1;
+	unsigned int has_preamble:1;
+	unsigned int has_sensitivity:1;
+	unsigned int has_hostscan:1;
+	unsigned int has_alt_txcntl:1;
+	unsigned int has_ext_scan:1;
+	unsigned int has_wpa:1;
+	unsigned int do_fw_download:1;
+	unsigned int broken_disableport:1;
+	unsigned int broken_monitor:1;
+
+	/* Configuration paramaters */
+	u32 iw_mode;
+	int prefer_port3;
+	u16 encode_alg, wep_restrict, tx_key;
+	struct orinoco_key keys[ORINOCO_MAX_KEYS];
+	int bitratemode;
+ 	char nick[IW_ESSID_MAX_SIZE+1];
+	char desired_essid[IW_ESSID_MAX_SIZE+1];
+	char desired_bssid[ETH_ALEN];
+	int bssid_fixed;
+	u16 frag_thresh, mwo_robust;
+	u16 channel;
+	u16 ap_density, rts_thresh;
+	u16 pm_on, pm_mcast, pm_period, pm_timeout;
+	u16 preamble;
+#ifdef WIRELESS_SPY
+ 	struct iw_spy_data spy_data; /* iwspy support */
+	struct iw_public_data	wireless_data;
+#endif
+
+	/* Configuration dependent variables */
+	int port_type, createibss;
+	int promiscuous, mc_count;
+
+	/* Scanning support */
+	struct list_head bss_list;
+	struct list_head bss_free_list;
+	void *bss_xbss_data;
+
+	int	scan_inprogress;	/* Scan pending... */
+	u32	scan_mode;		/* Type of scan done */
+
+	/* WPA support */
+	u8 *wpa_ie;
+	int wpa_ie_len;
+
+	struct orinoco_tkip_key tkip_key[ORINOCO_MAX_KEYS];
+	struct crypto_hash *rx_tfm_mic;
+	struct crypto_hash *tx_tfm_mic;
+
+	unsigned int wpa_enabled:1;
+	unsigned int tkip_cm_active:1;
+	unsigned int key_mgmt:3;
+
+	/* Cached in memory firmware to use in ->resume */
+	const struct firmware *cached_fw;
+};
+
+#ifdef ORINOCO_DEBUG
+extern int orinoco_debug;
+#define DEBUG(n, args...) do { if (orinoco_debug>(n)) printk(KERN_DEBUG args); } while(0)
+#else
+#define DEBUG(n, args...) do { } while (0)
+#endif	/* ORINOCO_DEBUG */
+
+/********************************************************************/
+/* Exported prototypes                                              */
+/********************************************************************/
+
+extern struct net_device *alloc_orinocodev(
+	int sizeof_card, struct device *device,
+	int (*hard_reset)(struct orinoco_private *),
+	int (*stop_fw)(struct orinoco_private *, int));
+extern void free_orinocodev(struct net_device *dev);
+extern int __orinoco_up(struct net_device *dev);
+extern int __orinoco_down(struct net_device *dev);
+extern int orinoco_reinit_firmware(struct net_device *dev);
+extern irqreturn_t orinoco_interrupt(int irq, void * dev_id);
+
+/********************************************************************/
+/* Locking and synchronization functions                            */
+/********************************************************************/
+
+static inline int orinoco_lock(struct orinoco_private *priv,
+			       unsigned long *flags)
+{
+	spin_lock_irqsave(&priv->lock, *flags);
+	if (priv->hw_unavailable) {
+		DEBUG(1, "orinoco_lock() called with hw_unavailable (dev=%p)\n",
+		       priv->ndev);
+		spin_unlock_irqrestore(&priv->lock, *flags);
+		return -EBUSY;
+	}
+	return 0;
+}
+
+static inline void orinoco_unlock(struct orinoco_private *priv,
+				  unsigned long *flags)
+{
+	spin_unlock_irqrestore(&priv->lock, *flags);
+}
+
+#endif /* _ORINOCO_H */
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
new file mode 100644
index 00000000000..6fcf2bda7cd
--- /dev/null
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -0,0 +1,533 @@
+/* orinoco_cs.c (formerly known as dldwd_cs.c)
+ *
+ * A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
+ * as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
+ * EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others).
+ * It should also be usable on various Prism II based cards such as the
+ * Linksys, D-Link and Farallon Skyline. It should also work on Symbol
+ * cards such as the 3Com AirConnect and Ericsson WLAN.
+ * 
+ * Copyright notice & release notes in file orinoco.c
+ */
+
+#define DRIVER_NAME "orinoco_cs"
+#define PFX DRIVER_NAME ": "
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ds.h>
+
+#include "orinoco.h"
+
+/********************************************************************/
+/* Module stuff							    */
+/********************************************************************/
+
+MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>");
+MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco, Prism II based and similar wireless cards");
+MODULE_LICENSE("Dual MPL/GPL");
+
+/* Module parameters */
+
+/* Some D-Link cards have buggy CIS. They do work at 5v properly, but
+ * don't have any CIS entry for it. This workaround it... */
+static int ignore_cis_vcc; /* = 0 */
+module_param(ignore_cis_vcc, int, 0);
+MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
+
+/********************************************************************/
+/* Data structures						    */
+/********************************************************************/
+
+/* PCMCIA specific device information (goes in the card field of
+ * struct orinoco_private */
+struct orinoco_pccard {
+	struct pcmcia_device	*p_dev;
+	dev_node_t node;
+
+	/* Used to handle hard reset */
+	/* yuck, we need this hack to work around the insanity of the
+         * PCMCIA layer */
+	unsigned long hard_reset_in_progress; 
+};
+
+
+/********************************************************************/
+/* Function prototypes						    */
+/********************************************************************/
+
+static int orinoco_cs_config(struct pcmcia_device *link);
+static void orinoco_cs_release(struct pcmcia_device *link);
+static void orinoco_cs_detach(struct pcmcia_device *p_dev);
+
+/********************************************************************/
+/* Device methods     						    */
+/********************************************************************/
+
+static int
+orinoco_cs_hard_reset(struct orinoco_private *priv)
+{
+	struct orinoco_pccard *card = priv->card;
+	struct pcmcia_device *link = card->p_dev;
+	int err;
+
+	/* We need atomic ops here, because we're not holding the lock */
+	set_bit(0, &card->hard_reset_in_progress);
+
+	err = pcmcia_reset_card(link->socket);
+	if (err)
+		return err;
+
+	msleep(100);
+	clear_bit(0, &card->hard_reset_in_progress);
+
+	return 0;
+}
+
+/********************************************************************/
+/* PCMCIA stuff     						    */
+/********************************************************************/
+
+/*
+ * This creates an "instance" of the driver, allocating local data
+ * structures for one device.  The device is registered with Card
+ * Services.
+ * 
+ * The dev_link structure is initialized, but we don't actually
+ * configure the card at this point -- we wait until we receive a card
+ * insertion event.  */
+static int
+orinoco_cs_probe(struct pcmcia_device *link)
+{
+	struct net_device *dev;
+	struct orinoco_private *priv;
+	struct orinoco_pccard *card;
+
+	dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link),
+			       orinoco_cs_hard_reset, NULL);
+	if (! dev)
+		return -ENOMEM;
+	priv = netdev_priv(dev);
+	card = priv->card;
+
+	/* Link both structures together */
+	card->p_dev = link;
+	link->priv = dev;
+
+	/* Interrupt setup */
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
+	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+	link->irq.Handler = orinoco_interrupt;
+	link->irq.Instance = dev; 
+
+	/* General socket configuration defaults can go here.  In this
+	 * client, we assume very little, and rely on the CIS for
+	 * almost everything.  In most clients, many details (i.e.,
+	 * number, sizes, and attributes of IO windows) are fixed by
+	 * the nature of the device, and can be hard-wired here. */
+	link->conf.Attributes = 0;
+	link->conf.IntType = INT_MEMORY_AND_IO;
+
+	return orinoco_cs_config(link);
+}				/* orinoco_cs_attach */
+
+/*
+ * This deletes a driver "instance".  The device is de-registered with
+ * Card Services.  If it has been released, all local data structures
+ * are freed.  Otherwise, the structures will be freed when the device
+ * is released.
+ */
+static void orinoco_cs_detach(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+
+	if (link->dev_node)
+		unregister_netdev(dev);
+
+	orinoco_cs_release(link);
+
+	free_orinocodev(dev);
+}				/* orinoco_cs_detach */
+
+/*
+ * orinoco_cs_config() is scheduled to run after a CARD_INSERTION
+ * event is received, to configure the PCMCIA socket, and to make the
+ * device available to the system.
+ */
+
+#define CS_CHECK(fn, ret) do { \
+		last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \
+	} while (0)
+
+static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
+				   cistpl_cftable_entry_t *cfg,
+				   cistpl_cftable_entry_t *dflt,
+				   unsigned int vcc,
+				   void *priv_data)
+{
+	if (cfg->index == 0)
+		goto next_entry;
+
+	/* Use power settings for Vcc and Vpp if present */
+	/* Note that the CIS values need to be rescaled */
+	if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+		if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+			DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n",  vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
+			if (!ignore_cis_vcc)
+				goto next_entry;
+		}
+	} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+		if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+			DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n",  vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
+			if (!ignore_cis_vcc)
+				goto next_entry;
+		}
+	}
+
+	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp =
+			cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp =
+			dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+	/* Do we need to allocate an interrupt? */
+	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+	/* IO window settings */
+	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+		if (!(io->flags & CISTPL_IO_8BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+		if (!(io->flags & CISTPL_IO_16BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+		p_dev->io.BasePort1 = io->win[0].base;
+		p_dev->io.NumPorts1 = io->win[0].len;
+		if (io->nwin > 1) {
+			p_dev->io.Attributes2 = p_dev->io.Attributes1;
+			p_dev->io.BasePort2 = io->win[1].base;
+			p_dev->io.NumPorts2 = io->win[1].len;
+		}
+
+		/* This reserves IO space but doesn't actually enable it */
+		if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+			goto next_entry;
+	}
+	return 0;
+
+next_entry:
+	pcmcia_disable_device(p_dev);
+	return -ENODEV;
+};
+
+static int
+orinoco_cs_config(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct orinoco_pccard *card = priv->card;
+	hermes_t *hw = &priv->hw;
+	int last_fn, last_ret;
+	void __iomem *mem;
+
+	/*
+	 * In this loop, we scan the CIS for configuration table
+	 * entries, each of which describes a valid card
+	 * configuration, including voltage, IO window, memory window,
+	 * and interrupt settings.
+	 *
+	 * We make no assumptions about the card to be configured: we
+	 * use just the information available in the CIS.  In an ideal
+	 * world, this would work for any PCMCIA card, but it requires
+	 * a complete and accurate CIS.  In practice, a driver usually
+	 * "knows" most of these things without consulting the CIS,
+	 * and most client drivers will only use the CIS to fill in
+	 * implementation-defined details.
+	 */
+	last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
+	if (last_ret) {
+		if (!ignore_cis_vcc)
+			printk(KERN_ERR PFX "GetNextTuple(): No matching "
+			       "CIS configuration.  Maybe you need the "
+			       "ignore_cis_vcc=1 parameter.\n");
+		cs_error(link, RequestIO, last_ret);
+		goto failed;
+	}
+
+	/*
+	 * Allocate an interrupt line.  Note that this does not assign
+	 * a handler to the interrupt, unless the 'Handler' member of
+	 * the irq structure is initialized.
+	 */
+	CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+
+	/* We initialize the hermes structure before completing PCMCIA
+	 * configuration just in case the interrupt handler gets
+	 * called. */
+	mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
+	if (!mem)
+		goto cs_failed;
+
+	hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
+
+	/*
+	 * This actually configures the PCMCIA socket -- setting up
+	 * the I/O windows and the interrupt mapping, and putting the
+	 * card and host interface into "Memory and IO" mode.
+	 */
+	CS_CHECK(RequestConfiguration,
+		 pcmcia_request_configuration(link, &link->conf));
+
+	/* Ok, we have the configuration, prepare to register the netdev */
+	dev->base_addr = link->io.BasePort1;
+	dev->irq = link->irq.AssignedIRQ;
+	card->node.major = card->node.minor = 0;
+
+	SET_NETDEV_DEV(dev, &handle_to_dev(link));
+	/* Tell the stack we exist */
+	if (register_netdev(dev) != 0) {
+		printk(KERN_ERR PFX "register_netdev() failed\n");
+		goto failed;
+	}
+
+	/* At this point, the dev_node_t structure(s) needs to be
+	 * initialized and arranged in a linked list at link->dev_node. */
+	strcpy(card->node.dev_name, dev->name);
+	link->dev_node = &card->node; /* link->dev_node being non-NULL is also
+                                    used to indicate that the
+                                    net_device has been registered */
+
+	/* Finally, report what we've done */
+	printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io "
+	       "0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id,
+	       link->irq.AssignedIRQ, link->io.BasePort1,
+	       link->io.BasePort1 + link->io.NumPorts1 - 1);
+	return 0;
+
+ cs_failed:
+	cs_error(link, last_fn, last_ret);
+
+ failed:
+	orinoco_cs_release(link);
+	return -ENODEV;
+}				/* orinoco_cs_config */
+
+/*
+ * After a card is removed, orinoco_cs_release() will unregister the
+ * device, and release the PCMCIA configuration.  If the device is
+ * still open, this will be postponed until it is closed.
+ */
+static void
+orinoco_cs_release(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+	struct orinoco_private *priv = netdev_priv(dev);
+	unsigned long flags;
+
+	/* We're committed to taking the device away now, so mark the
+	 * hardware as unavailable */
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->hw_unavailable++;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	pcmcia_disable_device(link);
+	if (priv->hw.iobase)
+		ioport_unmap(priv->hw.iobase);
+}				/* orinoco_cs_release */
+
+static int orinoco_cs_suspend(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct orinoco_pccard *card = priv->card;
+	int err = 0;
+	unsigned long flags;
+
+	/* This is probably racy, but I can't think of
+	   a better way, short of rewriting the PCMCIA
+	   layer to not suck :-( */
+	if (! test_bit(0, &card->hard_reset_in_progress)) {
+		spin_lock_irqsave(&priv->lock, flags);
+
+		err = __orinoco_down(dev);
+		if (err)
+			printk(KERN_WARNING "%s: Error %d downing interface\n",
+			       dev->name, err);
+
+		netif_device_detach(dev);
+		priv->hw_unavailable++;
+
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+
+	return 0;
+}
+
+static int orinoco_cs_resume(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct orinoco_pccard *card = priv->card;
+	int err = 0;
+	unsigned long flags;
+
+	if (! test_bit(0, &card->hard_reset_in_progress)) {
+		err = orinoco_reinit_firmware(dev);
+		if (err) {
+			printk(KERN_ERR "%s: Error %d re-initializing firmware\n",
+			       dev->name, err);
+			return -EIO;
+		}
+
+		spin_lock_irqsave(&priv->lock, flags);
+
+		netif_device_attach(dev);
+		priv->hw_unavailable--;
+
+		if (priv->open && ! priv->hw_unavailable) {
+			err = __orinoco_up(dev);
+			if (err)
+				printk(KERN_ERR "%s: Error %d restarting card\n",
+				       dev->name, err);
+		}
+
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+
+	return err;
+}
+
+
+/********************************************************************/
+/* Module initialization					    */
+/********************************************************************/
+
+/* Can't be declared "const" or the whole __initdata section will
+ * become const */
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+	" (David Gibson <hermes@gibson.dropbear.id.au>, "
+	"Pavel Roskin <proski@gnu.org>, et al)";
+
+static struct pcmcia_device_id orinoco_cs_ids[] = {
+	PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */
+	PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */
+	PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */
+	PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */
+	PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */
+	PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */
+	PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */
+	PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */
+	PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */
+	PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */
+	PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
+	PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */
+	PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */
+	PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */
+	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
+	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
+	PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */
+	PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
+	PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */
+	PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */
+	PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), /* SpeedStream Wireless Adapter */
+	PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */
+	PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */
+	PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */
+	PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */
+	PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */
+	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */
+	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */
+	PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9),
+	PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
+	PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5),
+	PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2),
+	PCMCIA_DEVICE_PROD_ID123("AIRVAST", "IEEE 802.11b Wireless PCMCIA Card", "HFA3863", 0xea569531, 0x4bcb9645, 0x355cb092),
+	PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f),
+	PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842),
+	PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e),
+	PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169),
+	PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb),
+	PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3),
+	PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18),
+	PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90),
+	PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b),
+	PCMCIA_DEVICE_PROD_ID123("corega", "WL PCCL-11", "ISL37300P", 0x0a21501a, 0x59868926, 0xc9049a39),
+	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584),
+	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9),
+	PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae),
+	PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac),
+	PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab),
+	PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916),
+	PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146),
+	PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3),
+	PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c),
+	PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
+	PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077),
+	PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18),
+	PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77),
+	PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf),
+	PCMCIA_DEVICE_PROD_ID123("Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", 0x4b801a17, 0xf222ec2d, 0x630d52b2),
+	PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92),
+	PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395),
+	PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a),
+	PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410),
+	PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3),
+	PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01),
+	PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a),
+	PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1),
+	PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1),
+	PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767),
+	PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6),
+	PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed),
+	PCMCIA_DEVICE_PROD_ID123("PCMCIA", "11M WLAN Card v2.5", "ISL37300P", 0x281f1c5d, 0x6e440487, 0xc9049a39),
+	PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264),
+	PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178),
+	PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
+	PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
+	PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
+	PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757),
+	PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a),
+	PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
+	PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39),
+	PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee),
+	PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids);
+
+static struct pcmcia_driver orinoco_driver = {
+	.owner		= THIS_MODULE,
+	.drv		= {
+		.name	= DRIVER_NAME,
+	},
+	.probe		= orinoco_cs_probe,
+	.remove		= orinoco_cs_detach,
+	.id_table       = orinoco_cs_ids,
+	.suspend	= orinoco_cs_suspend,
+	.resume		= orinoco_cs_resume,
+};
+
+static int __init
+init_orinoco_cs(void)
+{
+	printk(KERN_DEBUG "%s\n", version);
+
+	return pcmcia_register_driver(&orinoco_driver);
+}
+
+static void __exit
+exit_orinoco_cs(void)
+{
+	pcmcia_unregister_driver(&orinoco_driver);
+}
+
+module_init(init_orinoco_cs);
+module_exit(exit_orinoco_cs);
diff --git a/drivers/net/wireless/orinoco/orinoco_nortel.c b/drivers/net/wireless/orinoco/orinoco_nortel.c
new file mode 100644
index 00000000000..2fc86596302
--- /dev/null
+++ b/drivers/net/wireless/orinoco/orinoco_nortel.c
@@ -0,0 +1,324 @@
+/* orinoco_nortel.c
+ *
+ * Driver for Prism II devices which would usually be driven by orinoco_cs,
+ * but are connected to the PCI bus by a PCI-to-PCMCIA adapter used in
+ * Nortel emobility, Symbol LA-4113 and Symbol LA-4123.
+ *
+ * Copyright (C) 2002 Tobias Hoffmann
+ *           (C) 2003 Christoph Jungegger <disdos@traum404.de>
+ *
+ * Some of this code is borrowed from orinoco_plx.c
+ *	Copyright (C) 2001 Daniel Barlow
+ * Some of this code is borrowed from orinoco_pci.c 
+ *  Copyright (C) 2001 Jean Tourrilhes
+ * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing
+ * has been copied from it. linux-wlan-ng-0.1.10 is originally :
+ *	Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+ * 
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above.  If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL.  If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ */
+
+#define DRIVER_NAME "orinoco_nortel"
+#define PFX DRIVER_NAME ": "
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <pcmcia/cisreg.h>
+
+#include "orinoco.h"
+#include "orinoco_pci.h"
+
+#define COR_OFFSET    (0xe0)	/* COR attribute offset of Prism2 PC card */
+#define COR_VALUE     (COR_LEVEL_REQ | COR_FUNC_ENA)	/* Enable PC card with interrupt in level trigger */
+
+
+/*
+ * Do a soft reset of the card using the Configuration Option Register
+ * We need this to get going...
+ * This is the part of the code that is strongly inspired from wlan-ng
+ *
+ * Note bis : Don't try to access HERMES_CMD during the reset phase.
+ * It just won't work !
+ */
+static int orinoco_nortel_cor_reset(struct orinoco_private *priv)
+{
+	struct orinoco_pci_card *card = priv->card;
+
+	/* Assert the reset until the card notices */
+	iowrite16(8, card->bridge_io + 2);
+	ioread16(card->attr_io + COR_OFFSET);
+	iowrite16(0x80, card->attr_io + COR_OFFSET);
+	mdelay(1);
+
+	/* Give time for the card to recover from this hard effort */
+	iowrite16(0, card->attr_io + COR_OFFSET);
+	iowrite16(0, card->attr_io + COR_OFFSET);
+	mdelay(1);
+
+	/* Set COR as usual */
+	iowrite16(COR_VALUE, card->attr_io + COR_OFFSET);
+	iowrite16(COR_VALUE, card->attr_io + COR_OFFSET);
+	mdelay(1);
+
+	iowrite16(0x228, card->bridge_io + 2);
+
+	return 0;
+}
+
+static int orinoco_nortel_hw_init(struct orinoco_pci_card *card)
+{
+	int i;
+	u32 reg;
+
+	/* Setup bridge */
+	if (ioread16(card->bridge_io) & 1) {
+		printk(KERN_ERR PFX "brg1 answer1 wrong\n");
+		return -EBUSY;
+	}
+	iowrite16(0x118, card->bridge_io + 2);
+	iowrite16(0x108, card->bridge_io + 2);
+	mdelay(30);
+	iowrite16(0x8, card->bridge_io + 2);
+	for (i = 0; i < 30; i++) {
+		mdelay(30);
+		if (ioread16(card->bridge_io) & 0x10) {
+			break;
+		}
+	}
+	if (i == 30) {
+		printk(KERN_ERR PFX "brg1 timed out\n");
+		return -EBUSY;
+	}
+	if (ioread16(card->attr_io + COR_OFFSET) & 1) {
+		printk(KERN_ERR PFX "brg2 answer1 wrong\n");
+		return -EBUSY;
+	}
+	if (ioread16(card->attr_io + COR_OFFSET + 2) & 1) {
+		printk(KERN_ERR PFX "brg2 answer2 wrong\n");
+		return -EBUSY;
+	}
+	if (ioread16(card->attr_io + COR_OFFSET + 4) & 1) {
+		printk(KERN_ERR PFX "brg2 answer3 wrong\n");
+		return -EBUSY;
+	}
+
+	/* Set the PCMCIA COR register */
+	iowrite16(COR_VALUE, card->attr_io + COR_OFFSET);
+	mdelay(1);
+	reg = ioread16(card->attr_io + COR_OFFSET);
+	if (reg != COR_VALUE) {
+		printk(KERN_ERR PFX "Error setting COR value (reg=%x)\n",
+		       reg);
+		return -EBUSY;
+	}
+
+	/* Set LEDs */
+	iowrite16(1, card->bridge_io + 10);
+	return 0;
+}
+
+static int orinoco_nortel_init_one(struct pci_dev *pdev,
+				   const struct pci_device_id *ent)
+{
+	int err;
+	struct orinoco_private *priv;
+	struct orinoco_pci_card *card;
+	struct net_device *dev;
+	void __iomem *hermes_io, *bridge_io, *attr_io;
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		printk(KERN_ERR PFX "Cannot enable PCI device\n");
+		return err;
+	}
+
+	err = pci_request_regions(pdev, DRIVER_NAME);
+	if (err) {
+		printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
+		goto fail_resources;
+	}
+
+	bridge_io = pci_iomap(pdev, 0, 0);
+	if (!bridge_io) {
+		printk(KERN_ERR PFX "Cannot map bridge registers\n");
+		err = -EIO;
+		goto fail_map_bridge;
+	}
+
+	attr_io = pci_iomap(pdev, 1, 0);
+	if (!attr_io) {
+		printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n");
+		err = -EIO;
+		goto fail_map_attr;
+	}
+
+	hermes_io = pci_iomap(pdev, 2, 0);
+	if (!hermes_io) {
+		printk(KERN_ERR PFX "Cannot map chipset registers\n");
+		err = -EIO;
+		goto fail_map_hermes;
+	}
+
+	/* Allocate network device */
+	dev = alloc_orinocodev(sizeof(*card), &pdev->dev,
+			       orinoco_nortel_cor_reset, NULL);
+	if (!dev) {
+		printk(KERN_ERR PFX "Cannot allocate network device\n");
+		err = -ENOMEM;
+		goto fail_alloc;
+	}
+
+	priv = netdev_priv(dev);
+	card = priv->card;
+	card->bridge_io = bridge_io;
+	card->attr_io = attr_io;
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
+
+	err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
+			  dev->name, dev);
+	if (err) {
+		printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
+		err = -EBUSY;
+		goto fail_irq;
+	}
+
+	err = orinoco_nortel_hw_init(card);
+	if (err) {
+		printk(KERN_ERR PFX "Hardware initialization failed\n");
+		goto fail;
+	}
+
+	err = orinoco_nortel_cor_reset(priv);
+	if (err) {
+		printk(KERN_ERR PFX "Initial reset failed\n");
+		goto fail;
+	}
+
+	err = register_netdev(dev);
+	if (err) {
+		printk(KERN_ERR PFX "Cannot register network device\n");
+		goto fail;
+	}
+
+	pci_set_drvdata(pdev, dev);
+	printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name,
+	       pci_name(pdev));
+
+	return 0;
+
+ fail:
+	free_irq(pdev->irq, dev);
+
+ fail_irq:
+	pci_set_drvdata(pdev, NULL);
+	free_orinocodev(dev);
+
+ fail_alloc:
+	pci_iounmap(pdev, hermes_io);
+
+ fail_map_hermes:
+	pci_iounmap(pdev, attr_io);
+
+ fail_map_attr:
+	pci_iounmap(pdev, bridge_io);
+
+ fail_map_bridge:
+	pci_release_regions(pdev);
+
+ fail_resources:
+	pci_disable_device(pdev);
+
+	return err;
+}
+
+static void __devexit orinoco_nortel_remove_one(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct orinoco_pci_card *card = priv->card;
+
+	/* Clear LEDs */
+	iowrite16(0, card->bridge_io + 10);
+
+	unregister_netdev(dev);
+	free_irq(pdev->irq, dev);
+	pci_set_drvdata(pdev, NULL);
+	free_orinocodev(dev);
+	pci_iounmap(pdev, priv->hw.iobase);
+	pci_iounmap(pdev, card->attr_io);
+	pci_iounmap(pdev, card->bridge_io);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+}
+
+static struct pci_device_id orinoco_nortel_id_table[] = {
+	/* Nortel emobility PCI */
+	{0x126c, 0x8030, PCI_ANY_ID, PCI_ANY_ID,},
+	/* Symbol LA-4123 PCI */
+	{0x1562, 0x0001, PCI_ANY_ID, PCI_ANY_ID,},
+	{0,},
+};
+
+MODULE_DEVICE_TABLE(pci, orinoco_nortel_id_table);
+
+static struct pci_driver orinoco_nortel_driver = {
+	.name		= DRIVER_NAME,
+	.id_table	= orinoco_nortel_id_table,
+	.probe		= orinoco_nortel_init_one,
+	.remove		= __devexit_p(orinoco_nortel_remove_one),
+	.suspend	= orinoco_pci_suspend,
+	.resume		= orinoco_pci_resume,
+};
+
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+	" (Tobias Hoffmann & Christoph Jungegger <disdos@traum404.de>)";
+MODULE_AUTHOR("Christoph Jungegger <disdos@traum404.de>");
+MODULE_DESCRIPTION
+    ("Driver for wireless LAN cards using the Nortel PCI bridge");
+MODULE_LICENSE("Dual MPL/GPL");
+
+static int __init orinoco_nortel_init(void)
+{
+	printk(KERN_DEBUG "%s\n", version);
+	return pci_register_driver(&orinoco_nortel_driver);
+}
+
+static void __exit orinoco_nortel_exit(void)
+{
+	pci_unregister_driver(&orinoco_nortel_driver);
+}
+
+module_init(orinoco_nortel_init);
+module_exit(orinoco_nortel_exit);
+
+/*
+ * Local variables:
+ *  c-indent-level: 8
+ *  c-basic-offset: 8
+ *  tab-width: 8
+ * End:
+ */
diff --git a/drivers/net/wireless/orinoco/orinoco_pci.c b/drivers/net/wireless/orinoco/orinoco_pci.c
new file mode 100644
index 00000000000..4ebd638a073
--- /dev/null
+++ b/drivers/net/wireless/orinoco/orinoco_pci.c
@@ -0,0 +1,264 @@
+/* orinoco_pci.c
+ * 
+ * Driver for Prism 2.5/3 devices that have a direct PCI interface
+ * (i.e. these are not PCMCIA cards in a PCMCIA-to-PCI bridge).
+ * The card contains only one PCI region, which contains all the usual
+ * hermes registers, as well as the COR register.
+ *
+ * Current maintainers are:
+ * 	Pavel Roskin <proski AT gnu.org>
+ * and	David Gibson <hermes AT gibson.dropbear.id.au>
+ *
+ * Some of this code is borrowed from orinoco_plx.c
+ *	Copyright (C) 2001 Daniel Barlow <dan AT telent.net>
+ * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing
+ * has been copied from it. linux-wlan-ng-0.1.10 is originally :
+ *	Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+ * This file originally written by:
+ *	Copyright (C) 2001 Jean Tourrilhes <jt AT hpl.hp.com>
+ * And is now maintained by:
+ *	(C) Copyright David Gibson, IBM Corp. 2002-2003.
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above.  If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL.  If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ */
+
+#define DRIVER_NAME "orinoco_pci"
+#define PFX DRIVER_NAME ": "
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+
+#include "orinoco.h"
+#include "orinoco_pci.h"
+
+/* Offset of the COR register of the PCI card */
+#define HERMES_PCI_COR		(0x26)
+
+/* Bitmask to reset the card */
+#define HERMES_PCI_COR_MASK	(0x0080)
+
+/* Magic timeouts for doing the reset.
+ * Those times are straight from wlan-ng, and it is claimed that they
+ * are necessary. Alan will kill me. Take your time and grab a coffee. */
+#define HERMES_PCI_COR_ONT	(250)		/* ms */
+#define HERMES_PCI_COR_OFFT	(500)		/* ms */
+#define HERMES_PCI_COR_BUSYT	(500)		/* ms */
+
+/*
+ * Do a soft reset of the card using the Configuration Option Register
+ * We need this to get going...
+ * This is the part of the code that is strongly inspired from wlan-ng
+ *
+ * Note : This code is done with irq enabled. This mean that many
+ * interrupts will occur while we are there. This is why we use the
+ * jiffies to regulate time instead of a straight mdelay(). Usually we
+ * need only around 245 iteration of the loop to do 250 ms delay.
+ *
+ * Note bis : Don't try to access HERMES_CMD during the reset phase.
+ * It just won't work !
+ */
+static int orinoco_pci_cor_reset(struct orinoco_private *priv)
+{
+	hermes_t *hw = &priv->hw;
+	unsigned long timeout;
+	u16 reg;
+
+	/* Assert the reset until the card notices */
+	hermes_write_regn(hw, PCI_COR, HERMES_PCI_COR_MASK);
+	mdelay(HERMES_PCI_COR_ONT);
+
+	/* Give time for the card to recover from this hard effort */
+	hermes_write_regn(hw, PCI_COR, 0x0000);
+	mdelay(HERMES_PCI_COR_OFFT);
+
+	/* The card is ready when it's no longer busy */
+	timeout = jiffies + (HERMES_PCI_COR_BUSYT * HZ / 1000);
+	reg = hermes_read_regn(hw, CMD);
+	while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
+		mdelay(1);
+		reg = hermes_read_regn(hw, CMD);
+	}
+
+	/* Still busy? */
+	if (reg & HERMES_CMD_BUSY) {
+		printk(KERN_ERR PFX "Busy timeout\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int orinoco_pci_init_one(struct pci_dev *pdev,
+				const struct pci_device_id *ent)
+{
+	int err;
+	struct orinoco_private *priv;
+	struct orinoco_pci_card *card;
+	struct net_device *dev;
+	void __iomem *hermes_io;
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		printk(KERN_ERR PFX "Cannot enable PCI device\n");
+		return err;
+	}
+
+	err = pci_request_regions(pdev, DRIVER_NAME);
+	if (err) {
+		printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
+		goto fail_resources;
+	}
+
+	hermes_io = pci_iomap(pdev, 0, 0);
+	if (!hermes_io) {
+		printk(KERN_ERR PFX "Cannot remap chipset registers\n");
+		err = -EIO;
+		goto fail_map_hermes;
+	}
+
+	/* Allocate network device */
+	dev = alloc_orinocodev(sizeof(*card), &pdev->dev,
+			       orinoco_pci_cor_reset, NULL);
+	if (!dev) {
+		printk(KERN_ERR PFX "Cannot allocate network device\n");
+		err = -ENOMEM;
+		goto fail_alloc;
+	}
+
+	priv = netdev_priv(dev);
+	card = priv->card;
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	hermes_struct_init(&priv->hw, hermes_io, HERMES_32BIT_REGSPACING);
+
+	err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
+			  dev->name, dev);
+	if (err) {
+		printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
+		err = -EBUSY;
+		goto fail_irq;
+	}
+
+	err = orinoco_pci_cor_reset(priv);
+	if (err) {
+		printk(KERN_ERR PFX "Initial reset failed\n");
+		goto fail;
+	}
+
+	err = register_netdev(dev);
+	if (err) {
+		printk(KERN_ERR PFX "Cannot register network device\n");
+		goto fail;
+	}
+
+	pci_set_drvdata(pdev, dev);
+	printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name,
+	       pci_name(pdev));
+
+	return 0;
+
+ fail:
+	free_irq(pdev->irq, dev);
+
+ fail_irq:
+	pci_set_drvdata(pdev, NULL);
+	free_orinocodev(dev);
+
+ fail_alloc:
+	pci_iounmap(pdev, hermes_io);
+
+ fail_map_hermes:
+	pci_release_regions(pdev);
+
+ fail_resources:
+	pci_disable_device(pdev);
+
+	return err;
+}
+
+static void __devexit orinoco_pci_remove_one(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct orinoco_private *priv = netdev_priv(dev);
+
+	unregister_netdev(dev);
+	free_irq(pdev->irq, dev);
+	pci_set_drvdata(pdev, NULL);
+	free_orinocodev(dev);
+	pci_iounmap(pdev, priv->hw.iobase);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+}
+
+static struct pci_device_id orinoco_pci_id_table[] = {
+	/* Intersil Prism 3 */
+	{0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID,},
+	/* Intersil Prism 2.5 */
+	{0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID,},
+	/* Samsung MagicLAN SWL-2210P */
+	{0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID,},
+	{0,},
+};
+
+MODULE_DEVICE_TABLE(pci, orinoco_pci_id_table);
+
+static struct pci_driver orinoco_pci_driver = {
+	.name		= DRIVER_NAME,
+	.id_table	= orinoco_pci_id_table,
+	.probe		= orinoco_pci_init_one,
+	.remove		= __devexit_p(orinoco_pci_remove_one),
+	.suspend	= orinoco_pci_suspend,
+	.resume		= orinoco_pci_resume,
+};
+
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+	" (Pavel Roskin <proski@gnu.org>,"
+	" David Gibson <hermes@gibson.dropbear.id.au> &"
+	" Jean Tourrilhes <jt@hpl.hp.com>)";
+MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & David Gibson <hermes@gibson.dropbear.id.au>");
+MODULE_DESCRIPTION("Driver for wireless LAN cards using direct PCI interface");
+MODULE_LICENSE("Dual MPL/GPL");
+
+static int __init orinoco_pci_init(void)
+{
+	printk(KERN_DEBUG "%s\n", version);
+	return pci_register_driver(&orinoco_pci_driver);
+}
+
+static void __exit orinoco_pci_exit(void)
+{
+	pci_unregister_driver(&orinoco_pci_driver);
+}
+
+module_init(orinoco_pci_init);
+module_exit(orinoco_pci_exit);
+
+/*
+ * Local variables:
+ *  c-indent-level: 8
+ *  c-basic-offset: 8
+ *  tab-width: 8
+ * End:
+ */
diff --git a/drivers/net/wireless/orinoco/orinoco_pci.h b/drivers/net/wireless/orinoco/orinoco_pci.h
new file mode 100644
index 00000000000..f4e5e06760c
--- /dev/null
+++ b/drivers/net/wireless/orinoco/orinoco_pci.h
@@ -0,0 +1,109 @@
+/* orinoco_pci.h
+ * 
+ * Common code for all Orinoco drivers for PCI devices, including
+ * both native PCI and PCMCIA-to-PCI bridges.
+ *
+ * Copyright (C) 2005, Pavel Roskin.
+ * See orinoco.c for license.
+ */
+
+#ifndef _ORINOCO_PCI_H
+#define _ORINOCO_PCI_H
+
+#include <linux/netdevice.h>
+
+/* Driver specific data */
+struct orinoco_pci_card {
+	void __iomem *bridge_io;
+	void __iomem *attr_io;
+};
+
+#ifdef CONFIG_PM
+static int orinoco_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct orinoco_private *priv = netdev_priv(dev);
+	unsigned long flags;
+	int err;
+
+	err = orinoco_lock(priv, &flags);
+	if (err) {
+		printk(KERN_ERR "%s: cannot lock hardware for suspend\n",
+		       dev->name);
+		return err;
+	}
+
+	err = __orinoco_down(dev);
+	if (err)
+		printk(KERN_WARNING "%s: error %d bringing interface down "
+		       "for suspend\n", dev->name, err);
+	
+	netif_device_detach(dev);
+
+	priv->hw_unavailable++;
+	
+	orinoco_unlock(priv, &flags);
+
+	free_irq(pdev->irq, dev);
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, PCI_D3hot);
+
+	return 0;
+}
+
+static int orinoco_pci_resume(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct orinoco_private *priv = netdev_priv(dev);
+	unsigned long flags;
+	int err;
+
+	pci_set_power_state(pdev, 0);
+	err = pci_enable_device(pdev);
+	if (err) {
+		printk(KERN_ERR "%s: pci_enable_device failed on resume\n",
+		       dev->name);
+		return err;
+	}
+	pci_restore_state(pdev);
+
+	err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
+			  dev->name, dev);
+	if (err) {
+		printk(KERN_ERR "%s: cannot re-allocate IRQ on resume\n",
+		       dev->name);
+		pci_disable_device(pdev);
+		return -EBUSY;
+	}
+
+	err = orinoco_reinit_firmware(dev);
+	if (err) {
+		printk(KERN_ERR "%s: error %d re-initializing firmware "
+		       "on resume\n", dev->name, err);
+		return err;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	netif_device_attach(dev);
+
+	priv->hw_unavailable--;
+
+	if (priv->open && (! priv->hw_unavailable)) {
+		err = __orinoco_up(dev);
+		if (err)
+			printk(KERN_ERR "%s: Error %d restarting card on resume\n",
+			       dev->name, err);
+	}
+	
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+#else
+#define orinoco_pci_suspend NULL
+#define orinoco_pci_resume NULL
+#endif
+
+#endif /* _ORINOCO_PCI_H */
diff --git a/drivers/net/wireless/orinoco/orinoco_plx.c b/drivers/net/wireless/orinoco/orinoco_plx.c
new file mode 100644
index 00000000000..ef761857bb3
--- /dev/null
+++ b/drivers/net/wireless/orinoco/orinoco_plx.c
@@ -0,0 +1,371 @@
+/* orinoco_plx.c
+ *
+ * Driver for Prism II devices which would usually be driven by orinoco_cs,
+ * but are connected to the PCI bus by a PLX9052.
+ *
+ * Current maintainers are:
+ * 	Pavel Roskin <proski AT gnu.org>
+ * and	David Gibson <hermes AT gibson.dropbear.id.au>
+ *
+ * (C) Copyright David Gibson, IBM Corp. 2001-2003.
+ * Copyright (C) 2001 Daniel Barlow
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above.  If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL.  If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ *
+ * Here's the general details on how the PLX9052 adapter works:
+ *
+ * - Two PCI I/O address spaces, one 0x80 long which contains the
+ * PLX9052 registers, and one that's 0x40 long mapped to the PCMCIA
+ * slot I/O address space.
+ *
+ * - One PCI memory address space, mapped to the PCMCIA attribute space
+ * (containing the CIS).
+ *
+ * Using the later, you can read through the CIS data to make sure the
+ * card is compatible with the driver. Keep in mind that the PCMCIA
+ * spec specifies the CIS as the lower 8 bits of each word read from
+ * the CIS, so to read the bytes of the CIS, read every other byte
+ * (0,2,4,...). Passing that test, you need to enable the I/O address
+ * space on the PCMCIA card via the PCMCIA COR register. This is the
+ * first byte following the CIS. In my case (which may not have any
+ * relation to what's on the PRISM2 cards), COR was at offset 0x800
+ * within the PCI memory space. Write 0x41 to the COR register to
+ * enable I/O mode and to select level triggered interrupts. To
+ * confirm you actually succeeded, read the COR register back and make
+ * sure it actually got set to 0x41, in case you have an unexpected
+ * card inserted.
+ *
+ * Following that, you can treat the second PCI I/O address space (the
+ * one that's not 0x80 in length) as the PCMCIA I/O space.
+ *
+ * Note that in the Eumitcom's source for their drivers, they register
+ * the interrupt as edge triggered when registering it with the
+ * Windows kernel. I don't recall how to register edge triggered on
+ * Linux (if it can be done at all). But in some experimentation, I
+ * don't see much operational difference between using either
+ * interrupt mode. Don't mess with the interrupt mode in the COR
+ * register though, as the PLX9052 wants level triggers with the way
+ * the serial EEPROM configures it on the WL11000.
+ *
+ * There's some other little quirks related to timing that I bumped
+ * into, but I don't recall right now. Also, there's two variants of
+ * the WL11000 I've seen, revision A1 and T2. These seem to differ
+ * slightly in the timings configured in the wait-state generator in
+ * the PLX9052. There have also been some comments from Eumitcom that
+ * cards shouldn't be hot swapped, apparently due to risk of cooking
+ * the PLX9052. I'm unsure why they believe this, as I can't see
+ * anything in the design that would really cause a problem, except
+ * for crashing drivers not written to expect it. And having developed
+ * drivers for the WL11000, I'd say it's quite tricky to write code
+ * that will successfully deal with a hot unplug. Very odd things
+ * happen on the I/O side of things. But anyway, be warned. Despite
+ * that, I've hot-swapped a number of times during debugging and
+ * driver development for various reasons (stuck WAIT# line after the
+ * radio card's firmware locks up).
+ */
+
+#define DRIVER_NAME "orinoco_plx"
+#define PFX DRIVER_NAME ": "
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <pcmcia/cisreg.h>
+
+#include "orinoco.h"
+#include "orinoco_pci.h"
+
+#define COR_OFFSET	(0x3e0)	/* COR attribute offset of Prism2 PC card */
+#define COR_VALUE	(COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */
+#define COR_RESET     (0x80)	/* reset bit in the COR register */
+#define PLX_RESET_TIME	(500)	/* milliseconds */
+
+#define PLX_INTCSR		0x4c /* Interrupt Control & Status Register */
+#define PLX_INTCSR_INTEN	(1<<6) /* Interrupt Enable bit */
+
+/*
+ * Do a soft reset of the card using the Configuration Option Register
+ */
+static int orinoco_plx_cor_reset(struct orinoco_private *priv)
+{
+	hermes_t *hw = &priv->hw;
+	struct orinoco_pci_card *card = priv->card;
+	unsigned long timeout;
+	u16 reg;
+
+	iowrite8(COR_VALUE | COR_RESET, card->attr_io + COR_OFFSET);
+	mdelay(1);
+
+	iowrite8(COR_VALUE, card->attr_io + COR_OFFSET);
+	mdelay(1);
+
+	/* Just in case, wait more until the card is no longer busy */
+	timeout = jiffies + (PLX_RESET_TIME * HZ / 1000);
+	reg = hermes_read_regn(hw, CMD);
+	while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
+		mdelay(1);
+		reg = hermes_read_regn(hw, CMD);
+	}
+
+	/* Still busy? */
+	if (reg & HERMES_CMD_BUSY) {
+		printk(KERN_ERR PFX "Busy timeout\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int orinoco_plx_hw_init(struct orinoco_pci_card *card)
+{
+	int i;
+	u32 csr_reg;
+	static const u8 cis_magic[] = {
+		0x01, 0x03, 0x00, 0x00, 0xff, 0x17, 0x04, 0x67
+	};
+
+	printk(KERN_DEBUG PFX "CIS: ");
+	for (i = 0; i < 16; i++) {
+		printk("%02X:", ioread8(card->attr_io + (i << 1)));
+	}
+	printk("\n");
+
+	/* Verify whether a supported PC card is present */
+	/* FIXME: we probably need to be smarted about this */
+	for (i = 0; i < sizeof(cis_magic); i++) {
+		if (cis_magic[i] != ioread8(card->attr_io + (i << 1))) {
+			printk(KERN_ERR PFX "The CIS value of Prism2 PC "
+			       "card is unexpected\n");
+			return -ENODEV;
+		}
+	}
+
+	/* bjoern: We need to tell the card to enable interrupts, in
+	   case the serial eprom didn't do this already.  See the
+	   PLX9052 data book, p8-1 and 8-24 for reference. */
+	csr_reg = ioread32(card->bridge_io + PLX_INTCSR);
+	if (!(csr_reg & PLX_INTCSR_INTEN)) {
+		csr_reg |= PLX_INTCSR_INTEN;
+		iowrite32(csr_reg, card->bridge_io + PLX_INTCSR);
+		csr_reg = ioread32(card->bridge_io + PLX_INTCSR);
+		if (!(csr_reg & PLX_INTCSR_INTEN)) {
+			printk(KERN_ERR PFX "Cannot enable interrupts\n");
+			return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+static int orinoco_plx_init_one(struct pci_dev *pdev,
+				const struct pci_device_id *ent)
+{
+	int err;
+	struct orinoco_private *priv;
+	struct orinoco_pci_card *card;
+	struct net_device *dev;
+	void __iomem *hermes_io, *attr_io, *bridge_io;
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		printk(KERN_ERR PFX "Cannot enable PCI device\n");
+		return err;
+	}
+
+	err = pci_request_regions(pdev, DRIVER_NAME);
+	if (err) {
+		printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
+		goto fail_resources;
+	}
+
+	bridge_io = pci_iomap(pdev, 1, 0);
+	if (!bridge_io) {
+		printk(KERN_ERR PFX "Cannot map bridge registers\n");
+		err = -EIO;
+		goto fail_map_bridge;
+	}
+
+	attr_io = pci_iomap(pdev, 2, 0);
+	if (!attr_io) {
+		printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n");
+		err = -EIO;
+		goto fail_map_attr;
+	}
+
+	hermes_io = pci_iomap(pdev, 3, 0);
+	if (!hermes_io) {
+		printk(KERN_ERR PFX "Cannot map chipset registers\n");
+		err = -EIO;
+		goto fail_map_hermes;
+	}
+
+	/* Allocate network device */
+	dev = alloc_orinocodev(sizeof(*card), &pdev->dev,
+			       orinoco_plx_cor_reset, NULL);
+	if (!dev) {
+		printk(KERN_ERR PFX "Cannot allocate network device\n");
+		err = -ENOMEM;
+		goto fail_alloc;
+	}
+
+	priv = netdev_priv(dev);
+	card = priv->card;
+	card->bridge_io = bridge_io;
+	card->attr_io = attr_io;
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
+
+	err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
+			  dev->name, dev);
+	if (err) {
+		printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
+		err = -EBUSY;
+		goto fail_irq;
+	}
+
+	err = orinoco_plx_hw_init(card);
+	if (err) {
+		printk(KERN_ERR PFX "Hardware initialization failed\n");
+		goto fail;
+	}
+
+	err = orinoco_plx_cor_reset(priv);
+	if (err) {
+		printk(KERN_ERR PFX "Initial reset failed\n");
+		goto fail;
+	}
+
+	err = register_netdev(dev);
+	if (err) {
+		printk(KERN_ERR PFX "Cannot register network device\n");
+		goto fail;
+	}
+
+	pci_set_drvdata(pdev, dev);
+	printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name,
+	       pci_name(pdev));
+
+	return 0;
+
+ fail:
+	free_irq(pdev->irq, dev);
+
+ fail_irq:
+	pci_set_drvdata(pdev, NULL);
+	free_orinocodev(dev);
+
+ fail_alloc:
+	pci_iounmap(pdev, hermes_io);
+
+ fail_map_hermes:
+	pci_iounmap(pdev, attr_io);
+
+ fail_map_attr:
+	pci_iounmap(pdev, bridge_io);
+
+ fail_map_bridge:
+	pci_release_regions(pdev);
+
+ fail_resources:
+	pci_disable_device(pdev);
+
+	return err;
+}
+
+static void __devexit orinoco_plx_remove_one(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct orinoco_pci_card *card = priv->card;
+
+	unregister_netdev(dev);
+	free_irq(pdev->irq, dev);
+	pci_set_drvdata(pdev, NULL);
+	free_orinocodev(dev);
+	pci_iounmap(pdev, priv->hw.iobase);
+	pci_iounmap(pdev, card->attr_io);
+	pci_iounmap(pdev, card->bridge_io);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+}
+
+static struct pci_device_id orinoco_plx_id_table[] = {
+	{0x111a, 0x1023, PCI_ANY_ID, PCI_ANY_ID,},	/* Siemens SpeedStream SS1023 */
+	{0x1385, 0x4100, PCI_ANY_ID, PCI_ANY_ID,},	/* Netgear MA301 */
+	{0x15e8, 0x0130, PCI_ANY_ID, PCI_ANY_ID,},	/* Correga  - does this work? */
+	{0x1638, 0x1100, PCI_ANY_ID, PCI_ANY_ID,},	/* SMC EZConnect SMC2602W,
+							   Eumitcom PCI WL11000,
+							   Addtron AWA-100 */
+	{0x16ab, 0x1100, PCI_ANY_ID, PCI_ANY_ID,},	/* Global Sun Tech GL24110P */
+	{0x16ab, 0x1101, PCI_ANY_ID, PCI_ANY_ID,},	/* Reported working, but unknown */
+	{0x16ab, 0x1102, PCI_ANY_ID, PCI_ANY_ID,},	/* Linksys WDT11 */
+	{0x16ec, 0x3685, PCI_ANY_ID, PCI_ANY_ID,},	/* USR 2415 */
+	{0xec80, 0xec00, PCI_ANY_ID, PCI_ANY_ID,},	/* Belkin F5D6000 tested by
+							   Brendan W. McAdams <rit AT jacked-in.org> */
+	{0x10b7, 0x7770, PCI_ANY_ID, PCI_ANY_ID,},	/* 3Com AirConnect PCI tested by
+							   Damien Persohn <damien AT persohn.net> */
+	{0,},
+};
+
+MODULE_DEVICE_TABLE(pci, orinoco_plx_id_table);
+
+static struct pci_driver orinoco_plx_driver = {
+	.name		= DRIVER_NAME,
+	.id_table	= orinoco_plx_id_table,
+	.probe		= orinoco_plx_init_one,
+	.remove		= __devexit_p(orinoco_plx_remove_one),
+	.suspend	= orinoco_pci_suspend,
+	.resume		= orinoco_pci_resume,
+};
+
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+	" (Pavel Roskin <proski@gnu.org>,"
+	" David Gibson <hermes@gibson.dropbear.id.au>,"
+	" Daniel Barlow <dan@telent.net>)";
+MODULE_AUTHOR("Daniel Barlow <dan@telent.net>");
+MODULE_DESCRIPTION("Driver for wireless LAN cards using the PLX9052 PCI bridge");
+MODULE_LICENSE("Dual MPL/GPL");
+
+static int __init orinoco_plx_init(void)
+{
+	printk(KERN_DEBUG "%s\n", version);
+	return pci_register_driver(&orinoco_plx_driver);
+}
+
+static void __exit orinoco_plx_exit(void)
+{
+	pci_unregister_driver(&orinoco_plx_driver);
+}
+
+module_init(orinoco_plx_init);
+module_exit(orinoco_plx_exit);
+
+/*
+ * Local variables:
+ *  c-indent-level: 8
+ *  c-basic-offset: 8
+ *  tab-width: 8
+ * End:
+ */
diff --git a/drivers/net/wireless/orinoco/orinoco_tmd.c b/drivers/net/wireless/orinoco/orinoco_tmd.c
new file mode 100644
index 00000000000..ede24ec309c
--- /dev/null
+++ b/drivers/net/wireless/orinoco/orinoco_tmd.c
@@ -0,0 +1,248 @@
+/* orinoco_tmd.c
+ *
+ * Driver for Prism II devices which would usually be driven by orinoco_cs,
+ * but are connected to the PCI bus by a TMD7160. 
+ *
+ * Copyright (C) 2003 Joerg Dorchain <joerg AT dorchain.net>
+ * based heavily upon orinoco_plx.c Copyright (C) 2001 Daniel Barlow
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above.  If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL.  If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ *
+ * The actual driving is done by orinoco.c, this is just resource
+ * allocation stuff.
+ *
+ * This driver is modeled after the orinoco_plx driver. The main
+ * difference is that the TMD chip has only IO port ranges and doesn't
+ * provide access to the PCMCIA attribute space.
+ *
+ * Pheecom sells cards with the TMD chip as "ASIC version"
+ */
+
+#define DRIVER_NAME "orinoco_tmd"
+#define PFX DRIVER_NAME ": "
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <pcmcia/cisreg.h>
+
+#include "orinoco.h"
+#include "orinoco_pci.h"
+
+#define COR_VALUE	(COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */
+#define COR_RESET     (0x80)	/* reset bit in the COR register */
+#define TMD_RESET_TIME	(500)	/* milliseconds */
+
+/*
+ * Do a soft reset of the card using the Configuration Option Register
+ */
+static int orinoco_tmd_cor_reset(struct orinoco_private *priv)
+{
+	hermes_t *hw = &priv->hw;
+	struct orinoco_pci_card *card = priv->card;
+	unsigned long timeout;
+	u16 reg;
+
+	iowrite8(COR_VALUE | COR_RESET, card->bridge_io);
+	mdelay(1);
+
+	iowrite8(COR_VALUE, card->bridge_io);
+	mdelay(1);
+
+	/* Just in case, wait more until the card is no longer busy */
+	timeout = jiffies + (TMD_RESET_TIME * HZ / 1000);
+	reg = hermes_read_regn(hw, CMD);
+	while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
+		mdelay(1);
+		reg = hermes_read_regn(hw, CMD);
+	}
+
+	/* Still busy? */
+	if (reg & HERMES_CMD_BUSY) {
+		printk(KERN_ERR PFX "Busy timeout\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+
+static int orinoco_tmd_init_one(struct pci_dev *pdev,
+				const struct pci_device_id *ent)
+{
+	int err;
+	struct orinoco_private *priv;
+	struct orinoco_pci_card *card;
+	struct net_device *dev;
+	void __iomem *hermes_io, *bridge_io;
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		printk(KERN_ERR PFX "Cannot enable PCI device\n");
+		return err;
+	}
+
+	err = pci_request_regions(pdev, DRIVER_NAME);
+	if (err) {
+		printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
+		goto fail_resources;
+	}
+
+	bridge_io = pci_iomap(pdev, 1, 0);
+	if (!bridge_io) {
+		printk(KERN_ERR PFX "Cannot map bridge registers\n");
+		err = -EIO;
+		goto fail_map_bridge;
+	}
+
+	hermes_io = pci_iomap(pdev, 2, 0);
+	if (!hermes_io) {
+		printk(KERN_ERR PFX "Cannot map chipset registers\n");
+		err = -EIO;
+		goto fail_map_hermes;
+	}
+
+	/* Allocate network device */
+	dev = alloc_orinocodev(sizeof(*card), &pdev->dev,
+			       orinoco_tmd_cor_reset, NULL);
+	if (!dev) {
+		printk(KERN_ERR PFX "Cannot allocate network device\n");
+		err = -ENOMEM;
+		goto fail_alloc;
+	}
+
+	priv = netdev_priv(dev);
+	card = priv->card;
+	card->bridge_io = bridge_io;
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
+
+	err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
+			  dev->name, dev);
+	if (err) {
+		printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
+		err = -EBUSY;
+		goto fail_irq;
+	}
+
+	err = orinoco_tmd_cor_reset(priv);
+	if (err) {
+		printk(KERN_ERR PFX "Initial reset failed\n");
+		goto fail;
+	}
+
+	err = register_netdev(dev);
+	if (err) {
+		printk(KERN_ERR PFX "Cannot register network device\n");
+		goto fail;
+	}
+
+	pci_set_drvdata(pdev, dev);
+	printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name,
+	       pci_name(pdev));
+
+	return 0;
+
+ fail:
+	free_irq(pdev->irq, dev);
+
+ fail_irq:
+	pci_set_drvdata(pdev, NULL);
+	free_orinocodev(dev);
+
+ fail_alloc:
+	pci_iounmap(pdev, hermes_io);
+
+ fail_map_hermes:
+	pci_iounmap(pdev, bridge_io);
+
+ fail_map_bridge:
+	pci_release_regions(pdev);
+
+ fail_resources:
+	pci_disable_device(pdev);
+
+	return err;
+}
+
+static void __devexit orinoco_tmd_remove_one(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct orinoco_pci_card *card = priv->card;
+
+	unregister_netdev(dev);
+	free_irq(pdev->irq, dev);
+	pci_set_drvdata(pdev, NULL);
+	free_orinocodev(dev);
+	pci_iounmap(pdev, priv->hw.iobase);
+	pci_iounmap(pdev, card->bridge_io);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+}
+
+static struct pci_device_id orinoco_tmd_id_table[] = {
+	{0x15e8, 0x0131, PCI_ANY_ID, PCI_ANY_ID,},      /* NDC and OEMs, e.g. pheecom */
+	{0,},
+};
+
+MODULE_DEVICE_TABLE(pci, orinoco_tmd_id_table);
+
+static struct pci_driver orinoco_tmd_driver = {
+	.name		= DRIVER_NAME,
+	.id_table	= orinoco_tmd_id_table,
+	.probe		= orinoco_tmd_init_one,
+	.remove		= __devexit_p(orinoco_tmd_remove_one),
+	.suspend	= orinoco_pci_suspend,
+	.resume		= orinoco_pci_resume,
+};
+
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+	" (Joerg Dorchain <joerg@dorchain.net>)";
+MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
+MODULE_DESCRIPTION("Driver for wireless LAN cards using the TMD7160 PCI bridge");
+MODULE_LICENSE("Dual MPL/GPL");
+
+static int __init orinoco_tmd_init(void)
+{
+	printk(KERN_DEBUG "%s\n", version);
+	return pci_register_driver(&orinoco_tmd_driver);
+}
+
+static void __exit orinoco_tmd_exit(void)
+{
+	pci_unregister_driver(&orinoco_tmd_driver);
+}
+
+module_init(orinoco_tmd_init);
+module_exit(orinoco_tmd_exit);
+
+/*
+ * Local variables:
+ *  c-indent-level: 8
+ *  c-basic-offset: 8
+ *  tab-width: 8
+ * End:
+ */
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
new file mode 100644
index 00000000000..852789ad34b
--- /dev/null
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -0,0 +1,507 @@
+/*
+ * Driver for 802.11b cards using RAM-loadable Symbol firmware, such as
+ * Symbol Wireless Networker LA4137, CompactFlash cards by Socket
+ * Communications and Intel PRO/Wireless 2011B.
+ *
+ * The driver implements Symbol firmware download.  The rest is handled
+ * in hermes.c and orinoco.c.
+ *
+ * Utilities for downloading the Symbol firmware are available at
+ * http://sourceforge.net/projects/orinoco/
+ *
+ * Copyright (C) 2002-2005 Pavel Roskin <proski@gnu.org>
+ * Portions based on orinoco_cs.c:
+ * 	Copyright (C) David Gibson, Linuxcare Australia
+ * Portions based on Spectrum24tDnld.c from original spectrum24 driver:
+ * 	Copyright (C) Symbol Technologies.
+ *
+ * See copyright notice in file orinoco.c.
+ */
+
+#define DRIVER_NAME "spectrum_cs"
+#define PFX DRIVER_NAME ": "
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ds.h>
+
+#include "orinoco.h"
+
+/********************************************************************/
+/* Module stuff							    */
+/********************************************************************/
+
+MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>");
+MODULE_DESCRIPTION("Driver for Symbol Spectrum24 Trilogy cards with firmware downloader");
+MODULE_LICENSE("Dual MPL/GPL");
+
+/* Module parameters */
+
+/* Some D-Link cards have buggy CIS. They do work at 5v properly, but
+ * don't have any CIS entry for it. This workaround it... */
+static int ignore_cis_vcc; /* = 0 */
+module_param(ignore_cis_vcc, int, 0);
+MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
+
+/********************************************************************/
+/* Data structures						    */
+/********************************************************************/
+
+/* PCMCIA specific device information (goes in the card field of
+ * struct orinoco_private */
+struct orinoco_pccard {
+	struct pcmcia_device	*p_dev;
+	dev_node_t node;
+};
+
+/********************************************************************/
+/* Function prototypes						    */
+/********************************************************************/
+
+static int spectrum_cs_config(struct pcmcia_device *link);
+static void spectrum_cs_release(struct pcmcia_device *link);
+
+/* Constants for the CISREG_CCSR register */
+#define HCR_RUN		0x07	/* run firmware after reset */
+#define HCR_IDLE	0x0E	/* don't run firmware after reset */
+#define HCR_MEM16	0x10	/* memory width bit, should be preserved */
+
+
+#define CS_CHECK(fn, ret) \
+  do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+
+/*
+ * Reset the card using configuration registers COR and CCSR.
+ * If IDLE is 1, stop the firmware, so that it can be safely rewritten.
+ */
+static int
+spectrum_reset(struct pcmcia_device *link, int idle)
+{
+	int last_ret, last_fn;
+	conf_reg_t reg;
+	u_int save_cor;
+
+	/* Doing it if hardware is gone is guaranteed crash */
+	if (!pcmcia_dev_present(link))
+		return -ENODEV;
+
+	/* Save original COR value */
+	reg.Function = 0;
+	reg.Action = CS_READ;
+	reg.Offset = CISREG_COR;
+	CS_CHECK(AccessConfigurationRegister,
+		 pcmcia_access_configuration_register(link, &reg));
+	save_cor = reg.Value;
+
+	/* Soft-Reset card */
+	reg.Action = CS_WRITE;
+	reg.Offset = CISREG_COR;
+	reg.Value = (save_cor | COR_SOFT_RESET);
+	CS_CHECK(AccessConfigurationRegister,
+		 pcmcia_access_configuration_register(link, &reg));
+	udelay(1000);
+
+	/* Read CCSR */
+	reg.Action = CS_READ;
+	reg.Offset = CISREG_CCSR;
+	CS_CHECK(AccessConfigurationRegister,
+		 pcmcia_access_configuration_register(link, &reg));
+
+	/*
+	 * Start or stop the firmware.  Memory width bit should be
+	 * preserved from the value we've just read.
+	 */
+	reg.Action = CS_WRITE;
+	reg.Offset = CISREG_CCSR;
+	reg.Value = (idle ? HCR_IDLE : HCR_RUN) | (reg.Value & HCR_MEM16);
+	CS_CHECK(AccessConfigurationRegister,
+		 pcmcia_access_configuration_register(link, &reg));
+	udelay(1000);
+
+	/* Restore original COR configuration index */
+	reg.Action = CS_WRITE;
+	reg.Offset = CISREG_COR;
+	reg.Value = (save_cor & ~COR_SOFT_RESET);
+	CS_CHECK(AccessConfigurationRegister,
+		 pcmcia_access_configuration_register(link, &reg));
+	udelay(1000);
+	return 0;
+
+      cs_failed:
+	cs_error(link, last_fn, last_ret);
+	return -ENODEV;
+}
+
+/********************************************************************/
+/* Device methods     						    */
+/********************************************************************/
+
+static int
+spectrum_cs_hard_reset(struct orinoco_private *priv)
+{
+	struct orinoco_pccard *card = priv->card;
+	struct pcmcia_device *link = card->p_dev;
+
+	/* Soft reset using COR and HCR */
+	spectrum_reset(link, 0);
+
+	return 0;
+}
+
+static int
+spectrum_cs_stop_firmware(struct orinoco_private *priv, int idle)
+{
+	struct orinoco_pccard *card = priv->card;
+	struct pcmcia_device *link = card->p_dev;
+
+	return spectrum_reset(link, idle);
+}
+
+/********************************************************************/
+/* PCMCIA stuff     						    */
+/********************************************************************/
+
+/*
+ * This creates an "instance" of the driver, allocating local data
+ * structures for one device.  The device is registered with Card
+ * Services.
+ * 
+ * The dev_link structure is initialized, but we don't actually
+ * configure the card at this point -- we wait until we receive a card
+ * insertion event.  */
+static int
+spectrum_cs_probe(struct pcmcia_device *link)
+{
+	struct net_device *dev;
+	struct orinoco_private *priv;
+	struct orinoco_pccard *card;
+
+	dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link),
+			       spectrum_cs_hard_reset,
+			       spectrum_cs_stop_firmware);
+	if (! dev)
+		return -ENOMEM;
+	priv = netdev_priv(dev);
+	card = priv->card;
+
+	/* Link both structures together */
+	card->p_dev = link;
+	link->priv = dev;
+
+	/* Interrupt setup */
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
+	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+	link->irq.Handler = orinoco_interrupt;
+	link->irq.Instance = dev; 
+
+	/* General socket configuration defaults can go here.  In this
+	 * client, we assume very little, and rely on the CIS for
+	 * almost everything.  In most clients, many details (i.e.,
+	 * number, sizes, and attributes of IO windows) are fixed by
+	 * the nature of the device, and can be hard-wired here. */
+	link->conf.Attributes = 0;
+	link->conf.IntType = INT_MEMORY_AND_IO;
+
+	return spectrum_cs_config(link);
+}				/* spectrum_cs_attach */
+
+/*
+ * This deletes a driver "instance".  The device is de-registered with
+ * Card Services.  If it has been released, all local data structures
+ * are freed.  Otherwise, the structures will be freed when the device
+ * is released.
+ */
+static void spectrum_cs_detach(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+
+	if (link->dev_node)
+		unregister_netdev(dev);
+
+	spectrum_cs_release(link);
+
+	free_orinocodev(dev);
+}				/* spectrum_cs_detach */
+
+/*
+ * spectrum_cs_config() is scheduled to run after a CARD_INSERTION
+ * event is received, to configure the PCMCIA socket, and to make the
+ * device available to the system.
+ */
+
+static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
+				    cistpl_cftable_entry_t *cfg,
+				    cistpl_cftable_entry_t *dflt,
+				    unsigned int vcc,
+				    void *priv_data)
+{
+	if (cfg->index == 0)
+		goto next_entry;
+
+	/* Use power settings for Vcc and Vpp if present */
+	/* Note that the CIS values need to be rescaled */
+	if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+		if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+			DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n",  vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
+			if (!ignore_cis_vcc)
+				goto next_entry;
+		}
+	} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+		if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+			DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n",  vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
+			if (!ignore_cis_vcc)
+				goto next_entry;
+		}
+	}
+
+	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp =
+			cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp =
+			dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+	/* Do we need to allocate an interrupt? */
+	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+	/* IO window settings */
+	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+		if (!(io->flags & CISTPL_IO_8BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+		if (!(io->flags & CISTPL_IO_16BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+		p_dev->io.BasePort1 = io->win[0].base;
+		p_dev->io.NumPorts1 = io->win[0].len;
+		if (io->nwin > 1) {
+			p_dev->io.Attributes2 = p_dev->io.Attributes1;
+			p_dev->io.BasePort2 = io->win[1].base;
+			p_dev->io.NumPorts2 = io->win[1].len;
+		}
+
+		/* This reserves IO space but doesn't actually enable it */
+		if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+			goto next_entry;
+	}
+	return 0;
+
+next_entry:
+	pcmcia_disable_device(p_dev);
+	return -ENODEV;
+};
+
+static int
+spectrum_cs_config(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct orinoco_pccard *card = priv->card;
+	hermes_t *hw = &priv->hw;
+	int last_fn, last_ret;
+	void __iomem *mem;
+
+	/*
+	 * In this loop, we scan the CIS for configuration table
+	 * entries, each of which describes a valid card
+	 * configuration, including voltage, IO window, memory window,
+	 * and interrupt settings.
+	 *
+	 * We make no assumptions about the card to be configured: we
+	 * use just the information available in the CIS.  In an ideal
+	 * world, this would work for any PCMCIA card, but it requires
+	 * a complete and accurate CIS.  In practice, a driver usually
+	 * "knows" most of these things without consulting the CIS,
+	 * and most client drivers will only use the CIS to fill in
+	 * implementation-defined details.
+	 */
+	last_ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL);
+	if (last_ret) {
+		if (!ignore_cis_vcc)
+			printk(KERN_ERR PFX "GetNextTuple(): No matching "
+			       "CIS configuration.  Maybe you need the "
+			       "ignore_cis_vcc=1 parameter.\n");
+		cs_error(link, RequestIO, last_ret);
+		goto failed;
+	}
+
+	/*
+	 * Allocate an interrupt line.  Note that this does not assign
+	 * a handler to the interrupt, unless the 'Handler' member of
+	 * the irq structure is initialized.
+	 */
+	CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+
+	/* We initialize the hermes structure before completing PCMCIA
+	 * configuration just in case the interrupt handler gets
+	 * called. */
+	mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
+	if (!mem)
+		goto cs_failed;
+
+	hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
+
+	/*
+	 * This actually configures the PCMCIA socket -- setting up
+	 * the I/O windows and the interrupt mapping, and putting the
+	 * card and host interface into "Memory and IO" mode.
+	 */
+	CS_CHECK(RequestConfiguration,
+		 pcmcia_request_configuration(link, &link->conf));
+
+	/* Ok, we have the configuration, prepare to register the netdev */
+	dev->base_addr = link->io.BasePort1;
+	dev->irq = link->irq.AssignedIRQ;
+	card->node.major = card->node.minor = 0;
+
+	/* Reset card */
+	if (spectrum_cs_hard_reset(priv) != 0) {
+		goto failed;
+	}
+
+	SET_NETDEV_DEV(dev, &handle_to_dev(link));
+	/* Tell the stack we exist */
+	if (register_netdev(dev) != 0) {
+		printk(KERN_ERR PFX "register_netdev() failed\n");
+		goto failed;
+	}
+
+	/* At this point, the dev_node_t structure(s) needs to be
+	 * initialized and arranged in a linked list at link->dev_node. */
+	strcpy(card->node.dev_name, dev->name);
+	link->dev_node = &card->node; /* link->dev_node being non-NULL is also
+                                    used to indicate that the
+                                    net_device has been registered */
+
+	/* Finally, report what we've done */
+	printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io "
+	       "0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id,
+	       link->irq.AssignedIRQ, link->io.BasePort1,
+	       link->io.BasePort1 + link->io.NumPorts1 - 1);
+
+	return 0;
+
+ cs_failed:
+	cs_error(link, last_fn, last_ret);
+
+ failed:
+	spectrum_cs_release(link);
+	return -ENODEV;
+}				/* spectrum_cs_config */
+
+/*
+ * After a card is removed, spectrum_cs_release() will unregister the
+ * device, and release the PCMCIA configuration.  If the device is
+ * still open, this will be postponed until it is closed.
+ */
+static void
+spectrum_cs_release(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+	struct orinoco_private *priv = netdev_priv(dev);
+	unsigned long flags;
+
+	/* We're committed to taking the device away now, so mark the
+	 * hardware as unavailable */
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->hw_unavailable++;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	pcmcia_disable_device(link);
+	if (priv->hw.iobase)
+		ioport_unmap(priv->hw.iobase);
+}				/* spectrum_cs_release */
+
+
+static int
+spectrum_cs_suspend(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+	struct orinoco_private *priv = netdev_priv(dev);
+	unsigned long flags;
+	int err = 0;
+
+	/* Mark the device as stopped, to block IO until later */
+	spin_lock_irqsave(&priv->lock, flags);
+
+	err = __orinoco_down(dev);
+	if (err)
+		printk(KERN_WARNING "%s: Error %d downing interface\n",
+		       dev->name, err);
+
+	netif_device_detach(dev);
+	priv->hw_unavailable++;
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return err;
+}
+
+static int
+spectrum_cs_resume(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+	struct orinoco_private *priv = netdev_priv(dev);
+
+	netif_device_attach(dev);
+	priv->hw_unavailable--;
+	schedule_work(&priv->reset_work);
+
+	return 0;
+}
+
+
+/********************************************************************/
+/* Module initialization					    */
+/********************************************************************/
+
+/* Can't be declared "const" or the whole __initdata section will
+ * become const */
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+	" (Pavel Roskin <proski@gnu.org>,"
+	" David Gibson <hermes@gibson.dropbear.id.au>, et al)";
+
+static struct pcmcia_device_id spectrum_cs_ids[] = {
+	PCMCIA_DEVICE_MANF_CARD(0x026c, 0x0001), /* Symbol Spectrum24 LA4137 */
+	PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0001), /* Socket Communications CF */
+	PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless LAN PC Card", 0x816cc815, 0x6fbf459a), /* 2011B, not 2011 */
+	PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, spectrum_cs_ids);
+
+static struct pcmcia_driver orinoco_driver = {
+	.owner		= THIS_MODULE,
+	.drv		= {
+		.name	= DRIVER_NAME,
+	},
+	.probe		= spectrum_cs_probe,
+	.remove		= spectrum_cs_detach,
+	.suspend	= spectrum_cs_suspend,
+	.resume		= spectrum_cs_resume,
+	.id_table       = spectrum_cs_ids,
+};
+
+static int __init
+init_spectrum_cs(void)
+{
+	printk(KERN_DEBUG "%s\n", version);
+
+	return pcmcia_register_driver(&orinoco_driver);
+}
+
+static void __exit
+exit_spectrum_cs(void)
+{
+	pcmcia_unregister_driver(&orinoco_driver);
+}
+
+module_init(init_spectrum_cs);
+module_exit(exit_spectrum_cs);