Merge branch 'master' into for-2.6.35

Conflicts:
	fs/ext3/fsync.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

22 files changed, 2618 insertions, 788 deletions

diff --git a/drivers/net/wireless/orinoco/Kconfig b/drivers/net/wireless/orinoco/Kconfig
index e2a2c18920a..60819bcf437 100644
--- a/drivers/net/wireless/orinoco/Kconfig
+++ b/drivers/net/wireless/orinoco/Kconfig
@@ -27,6 +27,17 @@ config HERMES
 	  configure your card and that /etc/pcmcia/wireless.opts works :
 	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>
 
+config HERMES_PRISM
+	bool "Support Prism 2/2.5 chipset"
+	depends on HERMES
+	---help---
+
+	  Say Y to enable support for Prism 2 and 2.5 chipsets.  These
+	  chipsets are better handled by the hostap driver.  This driver
+	  would not support WPA or firmware download for Prism chipset.
+
+	  If you are not sure, say N.
+
 config HERMES_CACHE_FW_ON_INIT
 	bool "Cache Hermes firmware on driver initialisation"
 	depends on HERMES
@@ -86,7 +97,7 @@ config NORTEL_HERMES
 
 config PCI_HERMES
 	tristate "Prism 2.5 PCI 802.11b adaptor support"
-	depends on PCI && HERMES
+	depends on PCI && HERMES && HERMES_PRISM
 	help
 	  Enable support for PCI and mini-PCI 802.11b wireless NICs based on
 	  the Prism 2.5 chipset.  These are true PCI cards, not the 802.11b
@@ -121,3 +132,10 @@ config PCMCIA_SPECTRUM
 	  This driver requires firmware download on startup.  Utilities
 	  for downloading Symbol firmware are available at
 	  <http://sourceforge.net/projects/orinoco/>
+
+config ORINOCO_USB
+	tristate "Agere Orinoco USB support"
+	depends on USB && HERMES
+	select FW_LOADER
+	---help---
+	  This driver is for USB versions of the Agere Orinoco card.
diff --git a/drivers/net/wireless/orinoco/Makefile b/drivers/net/wireless/orinoco/Makefile
index 9abd6329bcb..bfdefb85abc 100644
--- a/drivers/net/wireless/orinoco/Makefile
+++ b/drivers/net/wireless/orinoco/Makefile
@@ -11,3 +11,7 @@ obj-$(CONFIG_PCI_HERMES)	+= orinoco_pci.o
 obj-$(CONFIG_TMD_HERMES)	+= orinoco_tmd.o
 obj-$(CONFIG_NORTEL_HERMES)	+= orinoco_nortel.o
 obj-$(CONFIG_PCMCIA_SPECTRUM)	+= spectrum_cs.o
+obj-$(CONFIG_ORINOCO_USB)	+= orinoco_usb.o
+
+# Orinoco should be endian clean.
+ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/net/wireless/orinoco/airport.c b/drivers/net/wireless/orinoco/airport.c
index c60df2c1aca..9bcee10c930 100644
--- a/drivers/net/wireless/orinoco/airport.c
+++ b/drivers/net/wireless/orinoco/airport.c
@@ -77,9 +77,9 @@ airport_resume(struct macio_dev *mdev)
 
 	enable_irq(card->irq);
 
-	spin_lock_irqsave(&priv->lock, flags);
+	priv->hw.ops->lock_irqsave(&priv->lock, &flags);
 	err = orinoco_up(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
+	priv->hw.ops->unlock_irqrestore(&priv->lock, &flags);
 
 	return err;
 }
@@ -195,7 +195,7 @@ airport_attach(struct macio_dev *mdev, const struct of_device_id *match)
 	ssleep(1);
 
 	/* Reset it before we get the interrupt */
-	hermes_init(hw);
+	hw->ops->init(hw);
 
 	if (request_irq(card->irq, orinoco_interrupt, 0, DRIVER_NAME, priv)) {
 		printk(KERN_ERR PFX "Couldn't get IRQ %d\n", card->irq);
@@ -210,7 +210,7 @@ airport_attach(struct macio_dev *mdev, const struct of_device_id *match)
 	}
 
 	/* Register an interface with the stack */
-	if (orinoco_if_add(priv, phys_addr, card->irq) != 0) {
+	if (orinoco_if_add(priv, phys_addr, card->irq, NULL) != 0) {
 		printk(KERN_ERR PFX "orinoco_if_add() failed\n");
 		goto failed;
 	}
diff --git a/drivers/net/wireless/orinoco/cfg.c b/drivers/net/wireless/orinoco/cfg.c
index 27f2d334264..8c4169c227a 100644
--- a/drivers/net/wireless/orinoco/cfg.c
+++ b/drivers/net/wireless/orinoco/cfg.c
@@ -88,7 +88,9 @@ int orinoco_wiphy_register(struct wiphy *wiphy)
 
 	wiphy->rts_threshold = priv->rts_thresh;
 	if (!priv->has_mwo)
-		wiphy->frag_threshold = priv->frag_thresh;
+		wiphy->frag_threshold = priv->frag_thresh + 1;
+	wiphy->retry_short = priv->short_retry_limit;
+	wiphy->retry_long = priv->long_retry_limit;
 
 	return wiphy_register(wiphy);
 }
@@ -157,6 +159,7 @@ static int orinoco_scan(struct wiphy *wiphy, struct net_device *dev,
 }
 
 static int orinoco_set_channel(struct wiphy *wiphy,
+			struct net_device *netdev,
 			struct ieee80211_channel *chan,
 			enum nl80211_channel_type channel_type)
 {
@@ -187,7 +190,7 @@ static int orinoco_set_channel(struct wiphy *wiphy,
 	if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
 		/* Fast channel change - no commit if successful */
 		hermes_t *hw = &priv->hw;
-		err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
+		err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST |
 					    HERMES_TEST_SET_CHANNEL,
 					channel, NULL);
 	}
@@ -196,8 +199,92 @@ static int orinoco_set_channel(struct wiphy *wiphy,
 	return err;
 }
 
+static int orinoco_set_wiphy_params(struct wiphy *wiphy, u32 changed)
+{
+	struct orinoco_private *priv = wiphy_priv(wiphy);
+	int frag_value = -1;
+	int rts_value = -1;
+	int err = 0;
+
+	if (changed & WIPHY_PARAM_RETRY_SHORT) {
+		/* Setting short retry not supported */
+		err = -EINVAL;
+	}
+
+	if (changed & WIPHY_PARAM_RETRY_LONG) {
+		/* Setting long retry not supported */
+		err = -EINVAL;
+	}
+
+	if (changed & WIPHY_PARAM_FRAG_THRESHOLD) {
+		/* Set fragmentation */
+		if (priv->has_mwo) {
+			if (wiphy->frag_threshold < 0)
+				frag_value = 0;
+			else {
+				printk(KERN_WARNING "%s: Fixed fragmentation "
+				       "is not supported on this firmware. "
+				       "Using MWO robust instead.\n",
+				       priv->ndev->name);
+				frag_value = 1;
+			}
+		} else {
+			if (wiphy->frag_threshold < 0)
+				frag_value = 2346;
+			else if ((wiphy->frag_threshold < 257) ||
+				 (wiphy->frag_threshold > 2347))
+				err = -EINVAL;
+			else
+				/* cfg80211 value is 257-2347 (odd only)
+				 * orinoco rid has range 256-2346 (even only) */
+				frag_value = wiphy->frag_threshold & ~0x1;
+		}
+	}
+
+	if (changed & WIPHY_PARAM_RTS_THRESHOLD) {
+		/* Set RTS.
+		 *
+		 * Prism documentation suggests default of 2432,
+		 * and a range of 0-3000.
+		 *
+		 * Current implementation uses 2347 as the default and
+		 * the upper limit.
+		 */
+
+		if (wiphy->rts_threshold < 0)
+			rts_value = 2347;
+		else if (wiphy->rts_threshold > 2347)
+			err = -EINVAL;
+		else
+			rts_value = wiphy->rts_threshold;
+	}
+
+	if (!err) {
+		unsigned long flags;
+
+		if (orinoco_lock(priv, &flags) != 0)
+			return -EBUSY;
+
+		if (frag_value >= 0) {
+			if (priv->has_mwo)
+				priv->mwo_robust = frag_value;
+			else
+				priv->frag_thresh = frag_value;
+		}
+		if (rts_value >= 0)
+			priv->rts_thresh = rts_value;
+
+		err = orinoco_commit(priv);
+
+		orinoco_unlock(priv, &flags);
+	}
+
+	return err;
+}
+
 const struct cfg80211_ops orinoco_cfg_ops = {
 	.change_virtual_intf = orinoco_change_vif,
 	.set_channel = orinoco_set_channel,
 	.scan = orinoco_scan,
+	.set_wiphy_params = orinoco_set_wiphy_params,
 };
diff --git a/drivers/net/wireless/orinoco/fw.c b/drivers/net/wireless/orinoco/fw.c
index 5ea0f7cf85b..3e1947d097c 100644
--- a/drivers/net/wireless/orinoco/fw.c
+++ b/drivers/net/wireless/orinoco/fw.c
@@ -122,7 +122,7 @@ orinoco_dl_firmware(struct orinoco_private *priv,
 	dev_dbg(dev, "Attempting to download firmware %s\n", firmware);
 
 	/* Read current plug data */
-	err = hermes_read_pda(hw, pda, fw->pda_addr, fw->pda_size, 0);
+	err = hw->ops->read_pda(hw, pda, fw->pda_addr, fw->pda_size);
 	dev_dbg(dev, "Read PDA returned %d\n", err);
 	if (err)
 		goto free;
@@ -149,7 +149,7 @@ orinoco_dl_firmware(struct orinoco_private *priv,
 	}
 
 	/* Enable aux port to allow programming */
-	err = hermesi_program_init(hw, le32_to_cpu(hdr->entry_point));
+	err = hw->ops->program_init(hw, le32_to_cpu(hdr->entry_point));
 	dev_dbg(dev, "Program init returned %d\n", err);
 	if (err != 0)
 		goto abort;
@@ -177,7 +177,7 @@ orinoco_dl_firmware(struct orinoco_private *priv,
 		goto abort;
 
 	/* Tell card we've finished */
-	err = hermesi_program_end(hw);
+	err = hw->ops->program_end(hw);
 	dev_dbg(dev, "Program end returned %d\n", err);
 	if (err != 0)
 		goto abort;
@@ -224,7 +224,7 @@ symbol_dl_image(struct orinoco_private *priv, const struct fw_info *fw,
 		if (!pda)
 			return -ENOMEM;
 
-		ret = hermes_read_pda(hw, pda, fw->pda_addr, fw->pda_size, 1);
+		ret = hw->ops->read_pda(hw, pda, fw->pda_addr, fw->pda_size);
 		if (ret)
 			goto free;
 	}
@@ -260,7 +260,7 @@ symbol_dl_image(struct orinoco_private *priv, const struct fw_info *fw,
 	}
 
 	/* Reset hermes chip and make sure it responds */
-	ret = hermes_init(hw);
+	ret = hw->ops->init(hw);
 
 	/* hermes_reset() should return 0 with the secondary firmware */
 	if (secondary && ret != 0)
diff --git a/drivers/net/wireless/orinoco/hermes.c b/drivers/net/wireless/orinoco/hermes.c
index 1a2fca76fd3..6c6a23e08df 100644
--- a/drivers/net/wireless/orinoco/hermes.c
+++ b/drivers/net/wireless/orinoco/hermes.c
@@ -52,6 +52,26 @@
 #define ALLOC_COMPL_TIMEOUT (1000) /* in iterations of ~10us */
 
 /*
+ * AUX port access.  To unlock the AUX port write the access keys to the
+ * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL
+ * register.  Then read it and make sure it's HERMES_AUX_ENABLED.
+ */
+#define HERMES_AUX_ENABLE	0x8000	/* Enable auxiliary port access */
+#define HERMES_AUX_DISABLE	0x4000	/* Disable to auxiliary port access */
+#define HERMES_AUX_ENABLED	0xC000	/* Auxiliary port is open */
+#define HERMES_AUX_DISABLED	0x0000	/* Auxiliary port is closed */
+
+#define HERMES_AUX_PW0	0xFE01
+#define HERMES_AUX_PW1	0xDC23
+#define HERMES_AUX_PW2	0xBA45
+
+/* HERMES_CMD_DOWNLD */
+#define HERMES_PROGRAM_DISABLE             (0x0000 | HERMES_CMD_DOWNLD)
+#define HERMES_PROGRAM_ENABLE_VOLATILE     (0x0100 | HERMES_CMD_DOWNLD)
+#define HERMES_PROGRAM_ENABLE_NON_VOLATILE (0x0200 | HERMES_CMD_DOWNLD)
+#define HERMES_PROGRAM_NON_VOLATILE        (0x0300 | HERMES_CMD_DOWNLD)
+
+/*
  * Debugging helpers
  */
 
@@ -70,6 +90,7 @@
 
 #endif /* ! HERMES_DEBUG */
 
+static const struct hermes_ops hermes_ops_local;
 
 /*
  * Internal functions
@@ -111,9 +132,9 @@ static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0,
  */
 
 /* For doing cmds that wipe the magic constant in SWSUPPORT0 */
-int hermes_doicmd_wait(hermes_t *hw, u16 cmd,
-		       u16 parm0, u16 parm1, u16 parm2,
-		       struct hermes_response *resp)
+static int hermes_doicmd_wait(hermes_t *hw, u16 cmd,
+			      u16 parm0, u16 parm1, u16 parm2,
+			      struct hermes_response *resp)
 {
 	int err = 0;
 	int k;
@@ -163,17 +184,18 @@ int hermes_doicmd_wait(hermes_t *hw, u16 cmd,
 out:
 	return err;
 }
-EXPORT_SYMBOL(hermes_doicmd_wait);
 
 void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing)
 {
 	hw->iobase = address;
 	hw->reg_spacing = reg_spacing;
 	hw->inten = 0x0;
+	hw->eeprom_pda = false;
+	hw->ops = &hermes_ops_local;
 }
 EXPORT_SYMBOL(hermes_struct_init);
 
-int hermes_init(hermes_t *hw)
+static int hermes_init(hermes_t *hw)
 {
 	u16 reg;
 	int err = 0;
@@ -217,7 +239,6 @@ int hermes_init(hermes_t *hw)
 
 	return err;
 }
-EXPORT_SYMBOL(hermes_init);
 
 /* Issue a command to the chip, and (busy!) wait for it to
  * complete.
@@ -228,8 +249,8 @@ EXPORT_SYMBOL(hermes_init);
  *     > 0 on error returned by the firmware
  *
  * Callable from any context, but locking is your problem. */
-int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
-		      struct hermes_response *resp)
+static int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
+			     struct hermes_response *resp)
 {
 	int err;
 	int k;
@@ -291,9 +312,8 @@ int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
  out:
 	return err;
 }
-EXPORT_SYMBOL(hermes_docmd_wait);
 
-int hermes_allocate(hermes_t *hw, u16 size, u16 *fid)
+static int hermes_allocate(hermes_t *hw, u16 size, u16 *fid)
 {
 	int err = 0;
 	int k;
@@ -333,7 +353,6 @@ int hermes_allocate(hermes_t *hw, u16 size, u16 *fid)
 
 	return 0;
 }
-EXPORT_SYMBOL(hermes_allocate);
 
 /* Set up a BAP to read a particular chunk of data from card's internal buffer.
  *
@@ -403,8 +422,8 @@ static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset)
  *       0 on success
  *     > 0 on error from firmware
  */
-int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
-		     u16 id, u16 offset)
+static int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
+			    u16 id, u16 offset)
 {
 	int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
 	int err = 0;
@@ -422,7 +441,6 @@ int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
  out:
 	return err;
 }
-EXPORT_SYMBOL(hermes_bap_pread);
 
 /* Write a block of data to the chip's buffer, via the
  * BAP. Synchronization/serialization is the caller's problem.
@@ -432,8 +450,8 @@ EXPORT_SYMBOL(hermes_bap_pread);
  *       0 on success
  *     > 0 on error from firmware
  */
-int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
-		      u16 id, u16 offset)
+static int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
+			     u16 id, u16 offset)
 {
 	int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
 	int err = 0;
@@ -451,7 +469,6 @@ int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
  out:
 	return err;
 }
-EXPORT_SYMBOL(hermes_bap_pwrite);
 
 /* Read a Length-Type-Value record from the card.
  *
@@ -461,8 +478,8 @@ EXPORT_SYMBOL(hermes_bap_pwrite);
  * practice.
  *
  * Callable from user or bh context.  */
-int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize,
-		    u16 *length, void *buf)
+static int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize,
+			   u16 *length, void *buf)
 {
 	int err = 0;
 	int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
@@ -505,10 +522,9 @@ int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize,
 
 	return 0;
 }
-EXPORT_SYMBOL(hermes_read_ltv);
 
-int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
-		     u16 length, const void *value)
+static int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
+			    u16 length, const void *value)
 {
 	int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
 	int err = 0;
@@ -533,4 +549,228 @@ int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
 
 	return err;
 }
-EXPORT_SYMBOL(hermes_write_ltv);
+
+/*** Hermes AUX control ***/
+
+static inline void
+hermes_aux_setaddr(hermes_t *hw, u32 addr)
+{
+	hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7));
+	hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F));
+}
+
+static inline int
+hermes_aux_control(hermes_t *hw, int enabled)
+{
+	int desired_state = enabled ? HERMES_AUX_ENABLED : HERMES_AUX_DISABLED;
+	int action = enabled ? HERMES_AUX_ENABLE : HERMES_AUX_DISABLE;
+	int i;
+
+	/* Already open? */
+	if (hermes_read_reg(hw, HERMES_CONTROL) == desired_state)
+		return 0;
+
+	hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0);
+	hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1);
+	hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2);
+	hermes_write_reg(hw, HERMES_CONTROL, action);
+
+	for (i = 0; i < 20; i++) {
+		udelay(10);
+		if (hermes_read_reg(hw, HERMES_CONTROL) ==
+		    desired_state)
+			return 0;
+	}
+
+	return -EBUSY;
+}
+
+/*** Hermes programming ***/
+
+/* About to start programming data (Hermes I)
+ * offset is the entry point
+ *
+ * Spectrum_cs' Symbol fw does not require this
+ * wl_lkm Agere fw does
+ * Don't know about intersil
+ */
+static int hermesi_program_init(hermes_t *hw, u32 offset)
+{
+	int err;
+
+	/* Disable interrupts?*/
+	/*hw->inten = 0x0;*/
+	/*hermes_write_regn(hw, INTEN, 0);*/
+	/*hermes_set_irqmask(hw, 0);*/
+
+	/* Acknowledge any outstanding command */
+	hermes_write_regn(hw, EVACK, 0xFFFF);
+
+	/* Using init_cmd_wait rather than cmd_wait */
+	err = hw->ops->init_cmd_wait(hw,
+				     0x0100 | HERMES_CMD_INIT,
+				     0, 0, 0, NULL);
+	if (err)
+		return err;
+
+	err = hw->ops->init_cmd_wait(hw,
+				     0x0000 | HERMES_CMD_INIT,
+				     0, 0, 0, NULL);
+	if (err)
+		return err;
+
+	err = hermes_aux_control(hw, 1);
+	pr_debug("AUX enable returned %d\n", err);
+
+	if (err)
+		return err;
+
+	pr_debug("Enabling volatile, EP 0x%08x\n", offset);
+	err = hw->ops->init_cmd_wait(hw,
+				     HERMES_PROGRAM_ENABLE_VOLATILE,
+				     offset & 0xFFFFu,
+				     offset >> 16,
+				     0,
+				     NULL);
+	pr_debug("PROGRAM_ENABLE returned %d\n", err);
+
+	return err;
+}
+
+/* Done programming data (Hermes I)
+ *
+ * Spectrum_cs' Symbol fw does not require this
+ * wl_lkm Agere fw does
+ * Don't know about intersil
+ */
+static int hermesi_program_end(hermes_t *hw)
+{
+	struct hermes_response resp;
+	int rc = 0;
+	int err;
+
+	rc = hw->ops->cmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp);
+
+	pr_debug("PROGRAM_DISABLE returned %d, "
+		 "r0 0x%04x, r1 0x%04x, r2 0x%04x\n",
+		 rc, resp.resp0, resp.resp1, resp.resp2);
+
+	if ((rc == 0) &&
+	    ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD))
+		rc = -EIO;
+
+	err = hermes_aux_control(hw, 0);
+	pr_debug("AUX disable returned %d\n", err);
+
+	/* Acknowledge any outstanding command */
+	hermes_write_regn(hw, EVACK, 0xFFFF);
+
+	/* Reinitialise, ignoring return */
+	(void) hw->ops->init_cmd_wait(hw, 0x0000 | HERMES_CMD_INIT,
+				      0, 0, 0, NULL);
+
+	return rc ? rc : err;
+}
+
+static int hermes_program_bytes(struct hermes *hw, const char *data,
+				u32 addr, u32 len)
+{
+	/* wl lkm splits the programming into chunks of 2000 bytes.
+	 * This restriction appears to come from USB. The PCMCIA
+	 * adapters can program the whole lot in one go */
+	hermes_aux_setaddr(hw, addr);
+	hermes_write_bytes(hw, HERMES_AUXDATA, data, len);
+	return 0;
+}
+
+/* Read PDA from the adapter */
+static int hermes_read_pda(hermes_t *hw, __le16 *pda, u32 pda_addr, u16 pda_len)
+{
+	int ret;
+	u16 pda_size;
+	u16 data_len = pda_len;
+	__le16 *data = pda;
+
+	if (hw->eeprom_pda) {
+		/* PDA of spectrum symbol is in eeprom */
+
+		/* Issue command to read EEPROM */
+		ret = hw->ops->cmd_wait(hw, HERMES_CMD_READMIF, 0, NULL);
+		if (ret)
+			return ret;
+	} else {
+		/* wl_lkm does not include PDA size in the PDA area.
+		 * We will pad the information into pda, so other routines
+		 * don't have to be modified */
+		pda[0] = cpu_to_le16(pda_len - 2);
+			/* Includes CFG_PROD_DATA but not itself */
+		pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */
+		data_len = pda_len - 4;
+		data = pda + 2;
+	}
+
+	/* Open auxiliary port */
+	ret = hermes_aux_control(hw, 1);
+	pr_debug("AUX enable returned %d\n", ret);
+	if (ret)
+		return ret;
+
+	/* Read PDA */
+	hermes_aux_setaddr(hw, pda_addr);
+	hermes_read_words(hw, HERMES_AUXDATA, data, data_len / 2);
+
+	/* Close aux port */
+	ret = hermes_aux_control(hw, 0);
+	pr_debug("AUX disable returned %d\n", ret);
+
+	/* Check PDA length */
+	pda_size = le16_to_cpu(pda[0]);
+	pr_debug("Actual PDA length %d, Max allowed %d\n",
+		 pda_size, pda_len);
+	if (pda_size > pda_len)
+		return -EINVAL;
+
+	return 0;
+}
+
+static void hermes_lock_irqsave(spinlock_t *lock,
+				unsigned long *flags) __acquires(lock)
+{
+	spin_lock_irqsave(lock, *flags);
+}
+
+static void hermes_unlock_irqrestore(spinlock_t *lock,
+				     unsigned long *flags) __releases(lock)
+{
+	spin_unlock_irqrestore(lock, *flags);
+}
+
+static void hermes_lock_irq(spinlock_t *lock) __acquires(lock)
+{
+	spin_lock_irq(lock);
+}
+
+static void hermes_unlock_irq(spinlock_t *lock) __releases(lock)
+{
+	spin_unlock_irq(lock);
+}
+
+/* Hermes operations for local buses */
+static const struct hermes_ops hermes_ops_local = {
+	.init = hermes_init,
+	.cmd_wait = hermes_docmd_wait,
+	.init_cmd_wait = hermes_doicmd_wait,
+	.allocate = hermes_allocate,
+	.read_ltv = hermes_read_ltv,
+	.write_ltv = hermes_write_ltv,
+	.bap_pread = hermes_bap_pread,
+	.bap_pwrite = hermes_bap_pwrite,
+	.read_pda = hermes_read_pda,
+	.program_init = hermesi_program_init,
+	.program_end = hermesi_program_end,
+	.program = hermes_program_bytes,
+	.lock_irqsave = hermes_lock_irqsave,
+	.unlock_irqrestore = hermes_unlock_irqrestore,
+	.lock_irq = hermes_lock_irq,
+	.unlock_irq = hermes_unlock_irq,
+};
diff --git a/drivers/net/wireless/orinoco/hermes.h b/drivers/net/wireless/orinoco/hermes.h
index 2dddbb597c4..9ca34e722b4 100644
--- a/drivers/net/wireless/orinoco/hermes.h
+++ b/drivers/net/wireless/orinoco/hermes.h
@@ -374,6 +374,37 @@ struct hermes_multicast {
 /* Timeouts */
 #define HERMES_BAP_BUSY_TIMEOUT (10000) /* In iterations of ~1us */
 
+struct hermes;
+
+/* Functions to access hardware */
+struct hermes_ops {
+	int (*init)(struct hermes *hw);
+	int (*cmd_wait)(struct hermes *hw, u16 cmd, u16 parm0,
+			struct hermes_response *resp);
+	int (*init_cmd_wait)(struct hermes *hw, u16 cmd,
+			     u16 parm0, u16 parm1, u16 parm2,
+			     struct hermes_response *resp);
+	int (*allocate)(struct hermes *hw, u16 size, u16 *fid);
+	int (*read_ltv)(struct hermes *hw, int bap, u16 rid, unsigned buflen,
+			u16 *length, void *buf);
+	int (*write_ltv)(struct hermes *hw, int bap, u16 rid,
+			 u16 length, const void *value);
+	int (*bap_pread)(struct hermes *hw, int bap, void *buf, int len,
+			 u16 id, u16 offset);
+	int (*bap_pwrite)(struct hermes *hw, int bap, const void *buf,
+			  int len, u16 id, u16 offset);
+	int (*read_pda)(struct hermes *hw, __le16 *pda,
+			u32 pda_addr, u16 pda_len);
+	int (*program_init)(struct hermes *hw, u32 entry_point);
+	int (*program_end)(struct hermes *hw);
+	int (*program)(struct hermes *hw, const char *buf,
+		       u32 addr, u32 len);
+	void (*lock_irqsave)(spinlock_t *lock, unsigned long *flags);
+	void (*unlock_irqrestore)(spinlock_t *lock, unsigned long *flags);
+	void (*lock_irq)(spinlock_t *lock);
+	void (*unlock_irq)(spinlock_t *lock);
+};
+
 /* Basic control structure */
 typedef struct hermes {
 	void __iomem *iobase;
@@ -381,6 +412,9 @@ typedef struct hermes {
 #define HERMES_16BIT_REGSPACING	0
 #define HERMES_32BIT_REGSPACING	1
 	u16 inten; /* Which interrupts should be enabled? */
+	bool eeprom_pda;
+	const struct hermes_ops *ops;
+	void *priv;
 } hermes_t;
 
 /* Register access convenience macros */
@@ -394,22 +428,6 @@ typedef struct hermes {
 
 /* Function prototypes */
 void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing);
-int hermes_init(hermes_t *hw);
-int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
-		      struct hermes_response *resp);
-int hermes_doicmd_wait(hermes_t *hw, u16 cmd,
-		       u16 parm0, u16 parm1, u16 parm2,
-		       struct hermes_response *resp);
-int hermes_allocate(hermes_t *hw, u16 size, u16 *fid);
-
-int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
-		       u16 id, u16 offset);
-int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
-			u16 id, u16 offset);
-int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen,
-		    u16 *length, void *buf);
-int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
-		      u16 length, const void *value);
 
 /* Inline functions */
 
@@ -426,13 +444,13 @@ static inline void hermes_set_irqmask(hermes_t *hw, u16 events)
 
 static inline int hermes_enable_port(hermes_t *hw, int port)
 {
-	return hermes_docmd_wait(hw, HERMES_CMD_ENABLE | (port << 8),
+	return hw->ops->cmd_wait(hw, HERMES_CMD_ENABLE | (port << 8),
 				 0, NULL);
 }
 
 static inline int hermes_disable_port(hermes_t *hw, int port)
 {
-	return hermes_docmd_wait(hw, HERMES_CMD_DISABLE | (port << 8),
+	return hw->ops->cmd_wait(hw, HERMES_CMD_DISABLE | (port << 8),
 				 0, NULL);
 }
 
@@ -440,7 +458,7 @@ static inline int hermes_disable_port(hermes_t *hw, int port)
  * information frame in __orinoco_ev_info() */
 static inline int hermes_inquire(hermes_t *hw, u16 rid)
 {
-	return hermes_docmd_wait(hw, HERMES_CMD_INQUIRE, rid, NULL);
+	return hw->ops->cmd_wait(hw, HERMES_CMD_INQUIRE, rid, NULL);
 }
 
 #define HERMES_BYTES_TO_RECLEN(n) ((((n)+1)/2) + 1)
@@ -475,10 +493,10 @@ static inline void hermes_clear_words(struct hermes *hw, int off,
 }
 
 #define HERMES_READ_RECORD(hw, bap, rid, buf) \
-	(hermes_read_ltv((hw), (bap), (rid), sizeof(*buf), NULL, (buf)))
+	(hw->ops->read_ltv((hw), (bap), (rid), sizeof(*buf), NULL, (buf)))
 #define HERMES_WRITE_RECORD(hw, bap, rid, buf) \
-	(hermes_write_ltv((hw), (bap), (rid), \
-			  HERMES_BYTES_TO_RECLEN(sizeof(*buf)), (buf)))
+	(hw->ops->write_ltv((hw), (bap), (rid), \
+			    HERMES_BYTES_TO_RECLEN(sizeof(*buf)), (buf)))
 
 static inline int hermes_read_wordrec(hermes_t *hw, int bap, u16 rid, u16 *word)
 {
diff --git a/drivers/net/wireless/orinoco/hermes_dld.c b/drivers/net/wireless/orinoco/hermes_dld.c
index fb157eb889c..6da85e75fce 100644
--- a/drivers/net/wireless/orinoco/hermes_dld.c
+++ b/drivers/net/wireless/orinoco/hermes_dld.c
@@ -46,37 +46,11 @@
 
 #define PFX "hermes_dld: "
 
-/*
- * AUX port access.  To unlock the AUX port write the access keys to the
- * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL
- * register.  Then read it and make sure it's HERMES_AUX_ENABLED.
- */
-#define HERMES_AUX_ENABLE	0x8000	/* Enable auxiliary port access */
-#define HERMES_AUX_DISABLE	0x4000	/* Disable to auxiliary port access */
-#define HERMES_AUX_ENABLED	0xC000	/* Auxiliary port is open */
-#define HERMES_AUX_DISABLED	0x0000	/* Auxiliary port is closed */
-
-#define HERMES_AUX_PW0	0xFE01
-#define HERMES_AUX_PW1	0xDC23
-#define HERMES_AUX_PW2	0xBA45
-
-/* HERMES_CMD_DOWNLD */
-#define HERMES_PROGRAM_DISABLE             (0x0000 | HERMES_CMD_DOWNLD)
-#define HERMES_PROGRAM_ENABLE_VOLATILE     (0x0100 | HERMES_CMD_DOWNLD)
-#define HERMES_PROGRAM_ENABLE_NON_VOLATILE (0x0200 | HERMES_CMD_DOWNLD)
-#define HERMES_PROGRAM_NON_VOLATILE        (0x0300 | HERMES_CMD_DOWNLD)
-
 /* End markers used in dblocks */
 #define PDI_END		0x00000000	/* End of PDA */
 #define BLOCK_END	0xFFFFFFFF	/* Last image block */
 #define TEXT_END	0x1A		/* End of text header */
 
-/* Limit the amout we try to download in a single shot.
- * Size is in bytes.
- */
-#define MAX_DL_SIZE 1024
-#define LIMIT_PROGRAM_SIZE 0
-
 /*
  * The following structures have little-endian fields denoted by
  * the leading underscore.  Don't access them directly - use inline
@@ -165,41 +139,6 @@ pdi_len(const struct pdi *pdi)
 	return 2 * (le16_to_cpu(pdi->len) - 1);
 }
 
-/*** Hermes AUX control ***/
-
-static inline void
-hermes_aux_setaddr(hermes_t *hw, u32 addr)
-{
-	hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7));
-	hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F));
-}
-
-static inline int
-hermes_aux_control(hermes_t *hw, int enabled)
-{
-	int desired_state = enabled ? HERMES_AUX_ENABLED : HERMES_AUX_DISABLED;
-	int action = enabled ? HERMES_AUX_ENABLE : HERMES_AUX_DISABLE;
-	int i;
-
-	/* Already open? */
-	if (hermes_read_reg(hw, HERMES_CONTROL) == desired_state)
-		return 0;
-
-	hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0);
-	hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1);
-	hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2);
-	hermes_write_reg(hw, HERMES_CONTROL, action);
-
-	for (i = 0; i < 20; i++) {
-		udelay(10);
-		if (hermes_read_reg(hw, HERMES_CONTROL) ==
-		    desired_state)
-			return 0;
-	}
-
-	return -EBUSY;
-}
-
 /*** Plug Data Functions ***/
 
 /*
@@ -271,62 +210,7 @@ hermes_plug_pdi(hermes_t *hw, const struct pdr *first_pdr,
 		return -EINVAL;
 
 	/* do the actual plugging */
-	hermes_aux_setaddr(hw, pdr_addr(pdr));
-	hermes_write_bytes(hw, HERMES_AUXDATA, pdi->data, pdi_len(pdi));
-
-	return 0;
-}
-
-/* Read PDA from the adapter */
-int hermes_read_pda(hermes_t *hw,
-		    __le16 *pda,
-		    u32 pda_addr,
-		    u16 pda_len,
-		    int use_eeprom) /* can we get this into hw? */
-{
-	int ret;
-	u16 pda_size;
-	u16 data_len = pda_len;
-	__le16 *data = pda;
-
-	if (use_eeprom) {
-		/* PDA of spectrum symbol is in eeprom */
-
-		/* Issue command to read EEPROM */
-		ret = hermes_docmd_wait(hw, HERMES_CMD_READMIF, 0, NULL);
-		if (ret)
-			return ret;
-	} else {
-		/* wl_lkm does not include PDA size in the PDA area.
-		 * We will pad the information into pda, so other routines
-		 * don't have to be modified */
-		pda[0] = cpu_to_le16(pda_len - 2);
-			/* Includes CFG_PROD_DATA but not itself */
-		pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */
-		data_len = pda_len - 4;
-		data = pda + 2;
-	}
-
-	/* Open auxiliary port */
-	ret = hermes_aux_control(hw, 1);
-	pr_debug(PFX "AUX enable returned %d\n", ret);
-	if (ret)
-		return ret;
-
-	/* read PDA from EEPROM */
-	hermes_aux_setaddr(hw, pda_addr);
-	hermes_read_words(hw, HERMES_AUXDATA, data, data_len / 2);
-
-	/* Close aux port */
-	ret = hermes_aux_control(hw, 0);
-	pr_debug(PFX "AUX disable returned %d\n", ret);
-
-	/* Check PDA length */
-	pda_size = le16_to_cpu(pda[0]);
-	pr_debug(PFX "Actual PDA length %d, Max allowed %d\n",
-		 pda_size, pda_len);
-	if (pda_size > pda_len)
-		return -EINVAL;
+	hw->ops->program(hw, pdi->data, pdr_addr(pdr), pdi_len(pdi));
 
 	return 0;
 }
@@ -389,101 +273,13 @@ hermes_blocks_length(const char *first_block, const void *end)
 
 /*** Hermes programming ***/
 
-/* About to start programming data (Hermes I)
- * offset is the entry point
- *
- * Spectrum_cs' Symbol fw does not require this
- * wl_lkm Agere fw does
- * Don't know about intersil
- */
-int hermesi_program_init(hermes_t *hw, u32 offset)
-{
-	int err;
-
-	/* Disable interrupts?*/
-	/*hw->inten = 0x0;*/
-	/*hermes_write_regn(hw, INTEN, 0);*/
-	/*hermes_set_irqmask(hw, 0);*/
-
-	/* Acknowledge any outstanding command */
-	hermes_write_regn(hw, EVACK, 0xFFFF);
-
-	/* Using doicmd_wait rather than docmd_wait */
-	err = hermes_doicmd_wait(hw,
-				 0x0100 | HERMES_CMD_INIT,
-				 0, 0, 0, NULL);
-	if (err)
-		return err;
-
-	err = hermes_doicmd_wait(hw,
-				 0x0000 | HERMES_CMD_INIT,
-				 0, 0, 0, NULL);
-	if (err)
-		return err;
-
-	err = hermes_aux_control(hw, 1);
-	pr_debug(PFX "AUX enable returned %d\n", err);
-
-	if (err)
-		return err;
-
-	pr_debug(PFX "Enabling volatile, EP 0x%08x\n", offset);
-	err = hermes_doicmd_wait(hw,
-				 HERMES_PROGRAM_ENABLE_VOLATILE,
-				 offset & 0xFFFFu,
-				 offset >> 16,
-				 0,
-				 NULL);
-	pr_debug(PFX "PROGRAM_ENABLE returned %d\n", err);
-
-	return err;
-}
-
-/* Done programming data (Hermes I)
- *
- * Spectrum_cs' Symbol fw does not require this
- * wl_lkm Agere fw does
- * Don't know about intersil
- */
-int hermesi_program_end(hermes_t *hw)
-{
-	struct hermes_response resp;
-	int rc = 0;
-	int err;
-
-	rc = hermes_docmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp);
-
-	pr_debug(PFX "PROGRAM_DISABLE returned %d, "
-		 "r0 0x%04x, r1 0x%04x, r2 0x%04x\n",
-		 rc, resp.resp0, resp.resp1, resp.resp2);
-
-	if ((rc == 0) &&
-	    ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD))
-		rc = -EIO;
-
-	err = hermes_aux_control(hw, 0);
-	pr_debug(PFX "AUX disable returned %d\n", err);
-
-	/* Acknowledge any outstanding command */
-	hermes_write_regn(hw, EVACK, 0xFFFF);
-
-	/* Reinitialise, ignoring return */
-	(void) hermes_doicmd_wait(hw, 0x0000 | HERMES_CMD_INIT,
-				  0, 0, 0, NULL);
-
-	return rc ? rc : err;
-}
-
 /* Program the data blocks */
 int hermes_program(hermes_t *hw, const char *first_block, const void *end)
 {
 	const struct dblock *blk;
 	u32 blkaddr;
 	u32 blklen;
-#if LIMIT_PROGRAM_SIZE
-	u32 addr;
-	u32 len;
-#endif
+	int err = 0;
 
 	blk = (const struct dblock *) first_block;
 
@@ -498,30 +294,10 @@ int hermes_program(hermes_t *hw, const char *first_block, const void *end)
 		pr_debug(PFX "Programming block of length %d "
 			 "to address 0x%08x\n", blklen, blkaddr);
 
-#if !LIMIT_PROGRAM_SIZE
-		/* wl_lkm driver splits this into writes of 2000 bytes */
-		hermes_aux_setaddr(hw, blkaddr);
-		hermes_write_bytes(hw, HERMES_AUXDATA, blk->data,
-				   blklen);
-#else
-		len = (blklen < MAX_DL_SIZE) ? blklen : MAX_DL_SIZE;
-		addr = blkaddr;
-
-		while (addr < (blkaddr + blklen)) {
-			pr_debug(PFX "Programming subblock of length %d "
-				 "to address 0x%08x. Data @ %p\n",
-				 len, addr, &blk->data[addr - blkaddr]);
-
-			hermes_aux_setaddr(hw, addr);
-			hermes_write_bytes(hw, HERMES_AUXDATA,
-					   &blk->data[addr - blkaddr],
-					   len);
-
-			addr += len;
-			len = ((blkaddr + blklen - addr) < MAX_DL_SIZE) ?
-				(blkaddr + blklen - addr) : MAX_DL_SIZE;
-		}
-#endif
+		err = hw->ops->program(hw, blk->data, blkaddr, blklen);
+		if (err)
+			break;
+
 		blk = (const struct dblock *) &blk->data[blklen];
 
 		if ((void *) blk > (end - sizeof(*blk)))
@@ -530,7 +306,7 @@ int hermes_program(hermes_t *hw, const char *first_block, const void *end)
 		blkaddr = dblock_addr(blk);
 		blklen = dblock_len(blk);
 	}
-	return 0;
+	return err;
 }
 
 /*** Default plugging data for Hermes I ***/
@@ -690,9 +466,8 @@ int hermes_apply_pda_with_defaults(hermes_t *hw,
 			if ((pdi_len(pdi) == pdr_len(pdr)) &&
 			    ((void *) pdi->data + pdi_len(pdi) < pda_end)) {
 				/* do the actual plugging */
-				hermes_aux_setaddr(hw, pdr_addr(pdr));
-				hermes_write_bytes(hw, HERMES_AUXDATA,
-						   pdi->data, pdi_len(pdi));
+				hw->ops->program(hw, pdi->data, pdr_addr(pdr),
+						 pdi_len(pdi));
 			}
 		}
 
diff --git a/drivers/net/wireless/orinoco/hw.c b/drivers/net/wireless/orinoco/hw.c
index e6369242e49..6fbd7885012 100644
--- a/drivers/net/wireless/orinoco/hw.c
+++ b/drivers/net/wireless/orinoco/hw.c
@@ -177,9 +177,9 @@ int determine_fw_capabilities(struct orinoco_private *priv,
 		/* 3Com MAC : 00:50:DA:* */
 		memset(tmp, 0, sizeof(tmp));
 		/* Get the Symbol firmware version */
-		err = hermes_read_ltv(hw, USER_BAP,
-				      HERMES_RID_SECONDARYVERSION_SYMBOL,
-				      SYMBOL_MAX_VER_LEN, NULL, &tmp);
+		err = hw->ops->read_ltv(hw, USER_BAP,
+					HERMES_RID_SECONDARYVERSION_SYMBOL,
+					SYMBOL_MAX_VER_LEN, NULL, &tmp);
 		if (err) {
 			dev_warn(dev, "Error %d reading Symbol firmware info. "
 				 "Wildly guessing capabilities...\n", err);
@@ -262,6 +262,13 @@ int determine_fw_capabilities(struct orinoco_private *priv,
 	if (fw_name)
 		dev_info(dev, "Firmware determined as %s\n", fw_name);
 
+#ifndef CONFIG_HERMES_PRISM
+	if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL) {
+		dev_err(dev, "Support for Prism chipset is not enabled\n");
+		return -ENODEV;
+	}
+#endif
+
 	return 0;
 }
 
@@ -279,8 +286,8 @@ int orinoco_hw_read_card_settings(struct orinoco_private *priv, u8 *dev_addr)
 	u16 reclen;
 
 	/* Get the MAC address */
-	err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
-			      ETH_ALEN, NULL, dev_addr);
+	err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
+				ETH_ALEN, NULL, dev_addr);
 	if (err) {
 		dev_warn(dev, "Failed to read MAC address!\n");
 		goto out;
@@ -289,8 +296,8 @@ int orinoco_hw_read_card_settings(struct orinoco_private *priv, u8 *dev_addr)
 	dev_dbg(dev, "MAC address %pM\n", dev_addr);
 
 	/* Get the station name */
-	err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
-			      sizeof(nickbuf), &reclen, &nickbuf);
+	err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
+				sizeof(nickbuf), &reclen, &nickbuf);
 	if (err) {
 		dev_err(dev, "failed to read station name\n");
 		goto out;
@@ -367,6 +374,32 @@ int orinoco_hw_read_card_settings(struct orinoco_private *priv, u8 *dev_addr)
 		err = hermes_read_wordrec(hw, USER_BAP,
 					  HERMES_RID_CNFPREAMBLE_SYMBOL,
 					  &priv->preamble);
+		if (err) {
+			dev_err(dev, "Failed to read preamble setup\n");
+			goto out;
+		}
+	}
+
+	/* Retry settings */
+	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT,
+				  &priv->short_retry_limit);
+	if (err) {
+		dev_err(dev, "Failed to read short retry limit\n");
+		goto out;
+	}
+
+	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT,
+				  &priv->long_retry_limit);
+	if (err) {
+		dev_err(dev, "Failed to read long retry limit\n");
+		goto out;
+	}
+
+	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME,
+				  &priv->retry_lifetime);
+	if (err) {
+		dev_err(dev, "Failed to read max retry lifetime\n");
+		goto out;
 	}
 
 out:
@@ -380,11 +413,11 @@ int orinoco_hw_allocate_fid(struct orinoco_private *priv)
 	struct hermes *hw = &priv->hw;
 	int err;
 
-	err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
+	err = hw->ops->allocate(hw, priv->nicbuf_size, &priv->txfid);
 	if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) {
 		/* Try workaround for old Symbol firmware bug */
 		priv->nicbuf_size = TX_NICBUF_SIZE_BUG;
-		err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
+		err = hw->ops->allocate(hw, priv->nicbuf_size, &priv->txfid);
 
 		dev_warn(dev, "Firmware ALLOC bug detected "
 			 "(old Symbol firmware?). Work around %s\n",
@@ -430,8 +463,9 @@ int orinoco_hw_program_rids(struct orinoco_private *priv)
 	struct hermes_idstring idbuf;
 
 	/* Set the MAC address */
-	err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
-			       HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr);
+	err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
+				 HERMES_BYTES_TO_RECLEN(ETH_ALEN),
+				 dev->dev_addr);
 	if (err) {
 		printk(KERN_ERR "%s: Error %d setting MAC address\n",
 		       dev->name, err);
@@ -494,7 +528,7 @@ int orinoco_hw_program_rids(struct orinoco_private *priv)
 	idbuf.len = cpu_to_le16(strlen(priv->desired_essid));
 	memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val));
 	/* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */
-	err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID,
+	err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID,
 			HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
 			&idbuf);
 	if (err) {
@@ -502,7 +536,7 @@ int orinoco_hw_program_rids(struct orinoco_private *priv)
 		       dev->name, err);
 		return err;
 	}
-	err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID,
+	err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID,
 			HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
 			&idbuf);
 	if (err) {
@@ -514,9 +548,9 @@ int orinoco_hw_program_rids(struct orinoco_private *priv)
 	/* Set the station name */
 	idbuf.len = cpu_to_le16(strlen(priv->nick));
 	memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val));
-	err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
-			       HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2),
-			       &idbuf);
+	err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
+				 HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2),
+				 &idbuf);
 	if (err) {
 		printk(KERN_ERR "%s: Error %d setting nickname\n",
 		       dev->name, err);
@@ -631,12 +665,12 @@ int orinoco_hw_program_rids(struct orinoco_private *priv)
 	if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
 		/* Enable monitor mode */
 		dev->type = ARPHRD_IEEE80211;
-		err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
+		err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST |
 					    HERMES_TEST_MONITOR, 0, NULL);
 	} else {
 		/* Disable monitor mode */
 		dev->type = ARPHRD_ETHER;
-		err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
+		err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST |
 					    HERMES_TEST_STOP, 0, NULL);
 	}
 	if (err)
@@ -662,8 +696,8 @@ int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, u8 *tsc)
 	if ((key < 0) || (key >= 4))
 		return -EINVAL;
 
-	err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV,
-			      sizeof(tsc_arr), NULL, &tsc_arr);
+	err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV,
+				sizeof(tsc_arr), NULL, &tsc_arr);
 	if (!err)
 		memcpy(tsc, &tsc_arr[key][0], sizeof(tsc_arr[0]));
 
@@ -842,7 +876,7 @@ int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv)
 				memcpy(key, priv->keys[i].key,
 				       priv->keys[i].key_len);
 
-				err = hermes_write_ltv(hw, USER_BAP,
+				err = hw->ops->write_ltv(hw, USER_BAP,
 						HERMES_RID_CNFDEFAULTKEY0 + i,
 						HERMES_BYTES_TO_RECLEN(keylen),
 						key);
@@ -1049,17 +1083,17 @@ int __orinoco_hw_set_multicast_list(struct orinoco_private *priv,
 	 * group address if either we want to multicast, or if we were
 	 * multicasting and want to stop */
 	if (!promisc && (mc_count || priv->mc_count)) {
-		struct dev_mc_list *p;
+		struct netdev_hw_addr *ha;
 		struct hermes_multicast mclist;
 		int i = 0;
 
-		netdev_for_each_mc_addr(p, dev) {
+		netdev_for_each_mc_addr(ha, dev) {
 			if (i == mc_count)
 				break;
-			memcpy(mclist.addr[i++], p->dmi_addr, ETH_ALEN);
+			memcpy(mclist.addr[i++], ha->addr, ETH_ALEN);
 		}
 
-		err = hermes_write_ltv(hw, USER_BAP,
+		err = hw->ops->write_ltv(hw, USER_BAP,
 				   HERMES_RID_CNFGROUPADDRESSES,
 				   HERMES_BYTES_TO_RECLEN(mc_count * ETH_ALEN),
 				   &mclist);
@@ -1101,15 +1135,15 @@ int orinoco_hw_get_essid(struct orinoco_private *priv, int *active,
 		rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID :
 			HERMES_RID_CNFDESIREDSSID;
 
-		err = hermes_read_ltv(hw, USER_BAP, rid, sizeof(essidbuf),
-				      NULL, &essidbuf);
+		err = hw->ops->read_ltv(hw, USER_BAP, rid, sizeof(essidbuf),
+					NULL, &essidbuf);
 		if (err)
 			goto fail_unlock;
 	} else {
 		*active = 0;
 
-		err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID,
-				      sizeof(essidbuf), NULL, &essidbuf);
+		err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID,
+					sizeof(essidbuf), NULL, &essidbuf);
 		if (err)
 			goto fail_unlock;
 	}
@@ -1180,8 +1214,8 @@ int orinoco_hw_get_bitratelist(struct orinoco_private *priv,
 	if (orinoco_lock(priv, &flags) != 0)
 		return -EBUSY;
 
-	err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES,
-			      sizeof(list), NULL, &list);
+	err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES,
+				sizeof(list), NULL, &list);
 	orinoco_unlock(priv, &flags);
 
 	if (err)
@@ -1248,7 +1282,7 @@ int orinoco_hw_trigger_scan(struct orinoco_private *priv,
 				idbuf.len = cpu_to_le16(len);
 				memcpy(idbuf.val, ssid->ssid, len);
 
-				err = hermes_write_ltv(hw, USER_BAP,
+				err = hw->ops->write_ltv(hw, USER_BAP,
 					       HERMES_RID_CNFSCANSSID_AGERE,
 					       HERMES_BYTES_TO_RECLEN(len + 2),
 					       &idbuf);
@@ -1312,8 +1346,8 @@ int orinoco_hw_get_current_bssid(struct orinoco_private *priv,
 	hermes_t *hw = &priv->hw;
 	int err;
 
-	err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
-			      ETH_ALEN, NULL, addr);
+	err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
+				ETH_ALEN, NULL, addr);
 
 	return err;
 }
diff --git a/drivers/net/wireless/orinoco/hw.h b/drivers/net/wireless/orinoco/hw.h
index 9799a1d14a6..97af71e7995 100644
--- a/drivers/net/wireless/orinoco/hw.h
+++ b/drivers/net/wireless/orinoco/hw.h
@@ -22,7 +22,6 @@
 
 /* Forward declarations */
 struct orinoco_private;
-struct dev_addr_list;
 
 int determine_fw_capabilities(struct orinoco_private *priv, char *fw_name,
 			      size_t fw_name_len, u32 *hw_ver);
diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c
index 413e9ab6cab..ca71f08709b 100644
--- a/drivers/net/wireless/orinoco/main.c
+++ b/drivers/net/wireless/orinoco/main.c
@@ -254,7 +254,7 @@ void set_port_type(struct orinoco_private *priv)
 /* Device methods                                                   */
 /********************************************************************/
 
-static int orinoco_open(struct net_device *dev)
+int orinoco_open(struct net_device *dev)
 {
 	struct orinoco_private *priv = ndev_priv(dev);
 	unsigned long flags;
@@ -272,8 +272,9 @@ static int orinoco_open(struct net_device *dev)
 
 	return err;
 }
+EXPORT_SYMBOL(orinoco_open);
 
-static int orinoco_stop(struct net_device *dev)
+int orinoco_stop(struct net_device *dev)
 {
 	struct orinoco_private *priv = ndev_priv(dev);
 	int err = 0;
@@ -281,25 +282,27 @@ static int orinoco_stop(struct net_device *dev)
 	/* We mustn't use orinoco_lock() here, because we need to be
 	   able to close the interface even if hw_unavailable is set
 	   (e.g. as we're released after a PC Card removal) */
-	spin_lock_irq(&priv->lock);
+	orinoco_lock_irq(priv);
 
 	priv->open = 0;
 
 	err = __orinoco_down(priv);
 
-	spin_unlock_irq(&priv->lock);
+	orinoco_unlock_irq(priv);
 
 	return err;
 }
+EXPORT_SYMBOL(orinoco_stop);
 
-static struct net_device_stats *orinoco_get_stats(struct net_device *dev)
+struct net_device_stats *orinoco_get_stats(struct net_device *dev)
 {
 	struct orinoco_private *priv = ndev_priv(dev);
 
 	return &priv->stats;
 }
+EXPORT_SYMBOL(orinoco_get_stats);
 
-static void orinoco_set_multicast_list(struct net_device *dev)
+void orinoco_set_multicast_list(struct net_device *dev)
 {
 	struct orinoco_private *priv = ndev_priv(dev);
 	unsigned long flags;
@@ -313,8 +316,9 @@ static void orinoco_set_multicast_list(struct net_device *dev)
 	__orinoco_set_multicast_list(dev);
 	orinoco_unlock(priv, &flags);
 }
+EXPORT_SYMBOL(orinoco_set_multicast_list);
 
-static int orinoco_change_mtu(struct net_device *dev, int new_mtu)
+int orinoco_change_mtu(struct net_device *dev, int new_mtu)
 {
 	struct orinoco_private *priv = ndev_priv(dev);
 
@@ -330,23 +334,115 @@ static int orinoco_change_mtu(struct net_device *dev, int new_mtu)
 
 	return 0;
 }
+EXPORT_SYMBOL(orinoco_change_mtu);
 
 /********************************************************************/
 /* Tx path                                                          */
 /********************************************************************/
 
+/* Add encapsulation and MIC to the existing SKB.
+ * The main xmit routine will then send the whole lot to the card.
+ * Need 8 bytes headroom
+ * Need 8 bytes tailroom
+ *
+ *                          With encapsulated ethernet II frame
+ *                          --------
+ *                          803.3 header (14 bytes)
+ *                           dst[6]
+ * --------                  src[6]
+ * 803.3 header (14 bytes)   len[2]
+ *  dst[6]                  803.2 header (8 bytes)
+ *  src[6]                   encaps[6]
+ *  len[2] <- leave alone -> len[2]
+ * --------                 -------- <-- 0
+ * Payload                  Payload
+ * ...                      ...
+ *
+ * --------                 --------
+ *                          MIC (8 bytes)
+ *                          --------
+ *
+ * returns 0 on success, -ENOMEM on error.
+ */
+int orinoco_process_xmit_skb(struct sk_buff *skb,
+			     struct net_device *dev,
+			     struct orinoco_private *priv,
+			     int *tx_control,
+			     u8 *mic_buf)
+{
+	struct orinoco_tkip_key *key;
+	struct ethhdr *eh;
+	int do_mic;
+
+	key = (struct orinoco_tkip_key *) priv->keys[priv->tx_key].key;
+
+	do_mic = ((priv->encode_alg == ORINOCO_ALG_TKIP) &&
+		  (key != NULL));
+
+	if (do_mic)
+		*tx_control |= (priv->tx_key << HERMES_MIC_KEY_ID_SHIFT) |
+			HERMES_TXCTRL_MIC;
+
+	eh = (struct ethhdr *)skb->data;
+
+	/* Encapsulate Ethernet-II frames */
+	if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */
+		struct header_struct {
+			struct ethhdr eth;	/* 802.3 header */
+			u8 encap[6];		/* 802.2 header */
+		} __attribute__ ((packed)) hdr;
+		int len = skb->len + sizeof(encaps_hdr) - (2 * ETH_ALEN);
+
+		if (skb_headroom(skb) < ENCAPS_OVERHEAD) {
+			if (net_ratelimit())
+				printk(KERN_ERR
+				       "%s: Not enough headroom for 802.2 headers %d\n",
+				       dev->name, skb_headroom(skb));
+			return -ENOMEM;
+		}
+
+		/* Fill in new header */
+		memcpy(&hdr.eth, eh, 2 * ETH_ALEN);
+		hdr.eth.h_proto = htons(len);
+		memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr));
+
+		/* Make room for the new header, and copy it in */
+		eh = (struct ethhdr *) skb_push(skb, ENCAPS_OVERHEAD);
+		memcpy(eh, &hdr, sizeof(hdr));
+	}
+
+	/* Calculate Michael MIC */
+	if (do_mic) {
+		size_t len = skb->len - ETH_HLEN;
+		u8 *mic = &mic_buf[0];
+
+		/* Have to write to an even address, so copy the spare
+		 * byte across */
+		if (skb->len % 2) {
+			*mic = skb->data[skb->len - 1];
+			mic++;
+		}
+
+		orinoco_mic(priv->tx_tfm_mic, key->tx_mic,
+			    eh->h_dest, eh->h_source, 0 /* priority */,
+			    skb->data + ETH_HLEN,
+			    len, mic);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(orinoco_process_xmit_skb);
+
 static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct orinoco_private *priv = ndev_priv(dev);
 	struct net_device_stats *stats = &priv->stats;
-	struct orinoco_tkip_key *key;
 	hermes_t *hw = &priv->hw;
 	int err = 0;
 	u16 txfid = priv->txfid;
-	struct ethhdr *eh;
 	int tx_control;
 	unsigned long flags;
-	int do_mic;
+	u8 mic_buf[MICHAEL_MIC_LEN+1];
 
 	if (!netif_running(dev)) {
 		printk(KERN_ERR "%s: Tx on stopped device!\n",
@@ -378,16 +474,12 @@ static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (skb->len < ETH_HLEN)
 		goto drop;
 
-	key = (struct orinoco_tkip_key *) priv->keys[priv->tx_key].key;
-
-	do_mic = ((priv->encode_alg == ORINOCO_ALG_TKIP) &&
-		  (key != NULL));
-
 	tx_control = HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX;
 
-	if (do_mic)
-		tx_control |= (priv->tx_key << HERMES_MIC_KEY_ID_SHIFT) |
-			HERMES_TXCTRL_MIC;
+	err = orinoco_process_xmit_skb(skb, dev, priv, &tx_control,
+				       &mic_buf[0]);
+	if (err)
+		goto drop;
 
 	if (priv->has_alt_txcntl) {
 		/* WPA enabled firmwares have tx_cntl at the end of
@@ -400,8 +492,8 @@ static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
 		memset(&desc, 0, sizeof(desc));
 
 		*txcntl = cpu_to_le16(tx_control);
-		err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc),
-					txfid, 0);
+		err = hw->ops->bap_pwrite(hw, USER_BAP, &desc, sizeof(desc),
+					  txfid, 0);
 		if (err) {
 			if (net_ratelimit())
 				printk(KERN_ERR "%s: Error %d writing Tx "
@@ -414,8 +506,8 @@ static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
 		memset(&desc, 0, sizeof(desc));
 
 		desc.tx_control = cpu_to_le16(tx_control);
-		err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc),
-					txfid, 0);
+		err = hw->ops->bap_pwrite(hw, USER_BAP, &desc, sizeof(desc),
+					  txfid, 0);
 		if (err) {
 			if (net_ratelimit())
 				printk(KERN_ERR "%s: Error %d writing Tx "
@@ -430,68 +522,24 @@ static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
 				   HERMES_802_3_OFFSET - HERMES_802_11_OFFSET);
 	}
 
-	eh = (struct ethhdr *)skb->data;
-
-	/* Encapsulate Ethernet-II frames */
-	if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */
-		struct header_struct {
-			struct ethhdr eth;	/* 802.3 header */
-			u8 encap[6];		/* 802.2 header */
-		} __attribute__ ((packed)) hdr;
-
-		/* Strip destination and source from the data */
-		skb_pull(skb, 2 * ETH_ALEN);
-
-		/* And move them to a separate header */
-		memcpy(&hdr.eth, eh, 2 * ETH_ALEN);
-		hdr.eth.h_proto = htons(sizeof(encaps_hdr) + skb->len);
-		memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr));
-
-		/* Insert the SNAP header */
-		if (skb_headroom(skb) < sizeof(hdr)) {
-			printk(KERN_ERR
-			       "%s: Not enough headroom for 802.2 headers %d\n",
-			       dev->name, skb_headroom(skb));
-			goto drop;
-		}
-		eh = (struct ethhdr *) skb_push(skb, sizeof(hdr));
-		memcpy(eh, &hdr, sizeof(hdr));
-	}
-
-	err = hermes_bap_pwrite(hw, USER_BAP, skb->data, skb->len,
-				txfid, HERMES_802_3_OFFSET);
+	err = hw->ops->bap_pwrite(hw, USER_BAP, skb->data, skb->len,
+				  txfid, HERMES_802_3_OFFSET);
 	if (err) {
 		printk(KERN_ERR "%s: Error %d writing packet to BAP\n",
 		       dev->name, err);
 		goto busy;
 	}
 
-	/* Calculate Michael MIC */
-	if (do_mic) {
-		u8 mic_buf[MICHAEL_MIC_LEN + 1];
-		u8 *mic;
-		size_t offset;
-		size_t len;
+	if (tx_control & HERMES_TXCTRL_MIC) {
+		size_t offset = HERMES_802_3_OFFSET + skb->len;
+		size_t len = MICHAEL_MIC_LEN;
 
-		if (skb->len % 2) {
-			/* MIC start is on an odd boundary */
-			mic_buf[0] = skb->data[skb->len - 1];
-			mic = &mic_buf[1];
-			offset = skb->len - 1;
-			len = MICHAEL_MIC_LEN + 1;
-		} else {
-			mic = &mic_buf[0];
-			offset = skb->len;
-			len = MICHAEL_MIC_LEN;
+		if (offset % 2) {
+			offset--;
+			len++;
 		}
-
-		orinoco_mic(priv->tx_tfm_mic, key->tx_mic,
-			    eh->h_dest, eh->h_source, 0 /* priority */,
-			    skb->data + ETH_HLEN, skb->len - ETH_HLEN, mic);
-
-		/* Write the MIC */
-		err = hermes_bap_pwrite(hw, USER_BAP, &mic_buf[0], len,
-					txfid, HERMES_802_3_OFFSET + offset);
+		err = hw->ops->bap_pwrite(hw, USER_BAP, &mic_buf[0], len,
+					  txfid, offset);
 		if (err) {
 			printk(KERN_ERR "%s: Error %d writing MIC to BAP\n",
 			       dev->name, err);
@@ -502,7 +550,7 @@ static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* Finally, we actually initiate the send */
 	netif_stop_queue(dev);
 
-	err = hermes_docmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL,
+	err = hw->ops->cmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL,
 				txfid, NULL);
 	if (err) {
 		netif_start_queue(dev);
@@ -512,7 +560,6 @@ static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
 		goto busy;
 	}
 
-	dev->trans_start = jiffies;
 	stats->tx_bytes += HERMES_802_3_OFFSET + skb->len;
 	goto ok;
 
@@ -572,9 +619,9 @@ static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw)
 		return; /* Nothing's really happened */
 
 	/* Read part of the frame header - we need status and addr1 */
-	err = hermes_bap_pread(hw, IRQ_BAP, &hdr,
-			       sizeof(struct hermes_txexc_data),
-			       fid, 0);
+	err = hw->ops->bap_pread(hw, IRQ_BAP, &hdr,
+				 sizeof(struct hermes_txexc_data),
+				 fid, 0);
 
 	hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
 	stats->tx_errors++;
@@ -615,7 +662,7 @@ static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw)
 	netif_wake_queue(dev);
 }
 
-static void orinoco_tx_timeout(struct net_device *dev)
+void orinoco_tx_timeout(struct net_device *dev)
 {
 	struct orinoco_private *priv = ndev_priv(dev);
 	struct net_device_stats *stats = &priv->stats;
@@ -630,6 +677,7 @@ static void orinoco_tx_timeout(struct net_device *dev)
 
 	schedule_work(&priv->reset_work);
 }
+EXPORT_SYMBOL(orinoco_tx_timeout);
 
 /********************************************************************/
 /* Rx path (data frames)                                            */
@@ -764,9 +812,9 @@ static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid,
 
 	/* If any, copy the data from the card to the skb */
 	if (datalen > 0) {
-		err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, datalen),
-				       ALIGN(datalen, 2), rxfid,
-				       HERMES_802_2_OFFSET);
+		err = hw->ops->bap_pread(hw, IRQ_BAP, skb_put(skb, datalen),
+					 ALIGN(datalen, 2), rxfid,
+					 HERMES_802_2_OFFSET);
 		if (err) {
 			printk(KERN_ERR "%s: error %d reading monitor frame\n",
 			       dev->name, err);
@@ -792,7 +840,7 @@ static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid,
 	stats->rx_dropped++;
 }
 
-static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
+void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
 {
 	struct orinoco_private *priv = ndev_priv(dev);
 	struct net_device_stats *stats = &priv->stats;
@@ -814,8 +862,8 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
 
 	rxfid = hermes_read_regn(hw, RXFID);
 
-	err = hermes_bap_pread(hw, IRQ_BAP, desc, sizeof(*desc),
-			       rxfid, 0);
+	err = hw->ops->bap_pread(hw, IRQ_BAP, desc, sizeof(*desc),
+				 rxfid, 0);
 	if (err) {
 		printk(KERN_ERR "%s: error %d reading Rx descriptor. "
 		       "Frame dropped.\n", dev->name, err);
@@ -882,9 +930,9 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
 	   nothing is removed.  2 is for aligning the IP header.  */
 	skb_reserve(skb, ETH_HLEN + 2);
 
-	err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, length),
-			       ALIGN(length, 2), rxfid,
-			       HERMES_802_2_OFFSET);
+	err = hw->ops->bap_pread(hw, IRQ_BAP, skb_put(skb, length),
+				 ALIGN(length, 2), rxfid,
+				 HERMES_802_2_OFFSET);
 	if (err) {
 		printk(KERN_ERR "%s: error %d reading frame. "
 		       "Frame dropped.\n", dev->name, err);
@@ -913,6 +961,7 @@ update_stats:
 out:
 	kfree(desc);
 }
+EXPORT_SYMBOL(__orinoco_ev_rx);
 
 static void orinoco_rx(struct net_device *dev,
 		       struct hermes_rx_descriptor *desc,
@@ -1145,9 +1194,9 @@ static void orinoco_join_ap(struct work_struct *work)
 		goto out;
 
 	/* Read scan results from the firmware */
-	err = hermes_read_ltv(hw, USER_BAP,
-			      HERMES_RID_SCANRESULTSTABLE,
-			      MAX_SCAN_LEN, &len, buf);
+	err = hw->ops->read_ltv(hw, USER_BAP,
+				HERMES_RID_SCANRESULTSTABLE,
+				MAX_SCAN_LEN, &len, buf);
 	if (err) {
 		printk(KERN_ERR "%s: Cannot read scan results\n",
 		       dev->name);
@@ -1194,8 +1243,8 @@ static void orinoco_send_bssid_wevent(struct orinoco_private *priv)
 	union iwreq_data wrqu;
 	int err;
 
-	err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
-			      ETH_ALEN, NULL, wrqu.ap_addr.sa_data);
+	err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
+				ETH_ALEN, NULL, wrqu.ap_addr.sa_data);
 	if (err != 0)
 		return;
 
@@ -1217,8 +1266,8 @@ static void orinoco_send_assocreqie_wevent(struct orinoco_private *priv)
 	if (!priv->has_wpa)
 		return;
 
-	err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_ASSOC_REQ_INFO,
-			      sizeof(buf), NULL, &buf);
+	err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_ASSOC_REQ_INFO,
+				sizeof(buf), NULL, &buf);
 	if (err != 0)
 		return;
 
@@ -1247,8 +1296,9 @@ static void orinoco_send_assocrespie_wevent(struct orinoco_private *priv)
 	if (!priv->has_wpa)
 		return;
 
-	err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_ASSOC_RESP_INFO,
-			      sizeof(buf), NULL, &buf);
+	err = hw->ops->read_ltv(hw, USER_BAP,
+				HERMES_RID_CURRENT_ASSOC_RESP_INFO,
+				sizeof(buf), NULL, &buf);
 	if (err != 0)
 		return;
 
@@ -1353,7 +1403,7 @@ static void orinoco_process_scan_results(struct work_struct *work)
 	spin_unlock_irqrestore(&priv->scan_lock, flags);
 }
 
-static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
+void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
 {
 	struct orinoco_private *priv = ndev_priv(dev);
 	u16 infofid;
@@ -1371,8 +1421,8 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
 	infofid = hermes_read_regn(hw, INFOFID);
 
 	/* Read the info frame header - don't try too hard */
-	err = hermes_bap_pread(hw, IRQ_BAP, &info, sizeof(info),
-			       infofid, 0);
+	err = hw->ops->bap_pread(hw, IRQ_BAP, &info, sizeof(info),
+				 infofid, 0);
 	if (err) {
 		printk(KERN_ERR "%s: error %d reading info frame. "
 		       "Frame dropped.\n", dev->name, err);
@@ -1393,8 +1443,8 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
 			len = sizeof(tallies);
 		}
 
-		err = hermes_bap_pread(hw, IRQ_BAP, &tallies, len,
-				       infofid, sizeof(info));
+		err = hw->ops->bap_pread(hw, IRQ_BAP, &tallies, len,
+					 infofid, sizeof(info));
 		if (err)
 			break;
 
@@ -1429,8 +1479,8 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
 			break;
 		}
 
-		err = hermes_bap_pread(hw, IRQ_BAP, &linkstatus, len,
-				       infofid, sizeof(info));
+		err = hw->ops->bap_pread(hw, IRQ_BAP, &linkstatus, len,
+					 infofid, sizeof(info));
 		if (err)
 			break;
 		newstatus = le16_to_cpu(linkstatus.linkstatus);
@@ -1494,8 +1544,8 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
 		}
 
 		/* Read scan data */
-		err = hermes_bap_pread(hw, IRQ_BAP, (void *) buf, len,
-				       infofid, sizeof(info));
+		err = hw->ops->bap_pread(hw, IRQ_BAP, (void *) buf, len,
+					 infofid, sizeof(info));
 		if (err) {
 			kfree(buf);
 			qabort_scan(priv);
@@ -1547,8 +1597,8 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
 			break;
 
 		/* Read scan data */
-		err = hermes_bap_pread(hw, IRQ_BAP, (void *) bss, len,
-				       infofid, sizeof(info));
+		err = hw->ops->bap_pread(hw, IRQ_BAP, (void *) bss, len,
+					 infofid, sizeof(info));
 		if (err)
 			kfree(bss);
 		else
@@ -1568,9 +1618,8 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
 		/* We don't actually do anything about it */
 		break;
 	}
-
-	return;
 }
+EXPORT_SYMBOL(__orinoco_ev_info);
 
 static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw)
 {
@@ -1647,7 +1696,7 @@ static int orinoco_reinit_firmware(struct orinoco_private *priv)
 	struct hermes *hw = &priv->hw;
 	int err;
 
-	err = hermes_init(hw);
+	err = hw->ops->init(hw);
 	if (priv->do_fw_download && !err) {
 		err = orinoco_download(priv);
 		if (err)
@@ -1735,7 +1784,7 @@ void orinoco_reset(struct work_struct *work)
 	}
 
 	/* This has to be called from user context */
-	spin_lock_irq(&priv->lock);
+	orinoco_lock_irq(priv);
 
 	priv->hw_unavailable--;
 
@@ -1750,7 +1799,7 @@ void orinoco_reset(struct work_struct *work)
 			dev->trans_start = jiffies;
 	}
 
-	spin_unlock_irq(&priv->lock);
+	orinoco_unlock_irq(priv);
 
 	return;
  disable:
@@ -1984,7 +2033,7 @@ int orinoco_init(struct orinoco_private *priv)
 	priv->nicbuf_size = IEEE80211_MAX_FRAME_LEN + ETH_HLEN;
 
 	/* Initialize the firmware */
-	err = hermes_init(hw);
+	err = hw->ops->init(hw);
 	if (err != 0) {
 		dev_err(dev, "Failed to initialize firmware (err = %d)\n",
 			err);
@@ -2067,9 +2116,9 @@ int orinoco_init(struct orinoco_private *priv)
 
 	/* Make the hardware available, as long as it hasn't been
 	 * removed elsewhere (e.g. by PCMCIA hot unplug) */
-	spin_lock_irq(&priv->lock);
+	orinoco_lock_irq(priv);
 	priv->hw_unavailable--;
-	spin_unlock_irq(&priv->lock);
+	orinoco_unlock_irq(priv);
 
 	dev_dbg(dev, "Ready\n");
 
@@ -2192,7 +2241,8 @@ EXPORT_SYMBOL(alloc_orinocodev);
  */
 int orinoco_if_add(struct orinoco_private *priv,
 		   unsigned long base_addr,
-		   unsigned int irq)
+		   unsigned int irq,
+		   const struct net_device_ops *ops)
 {
 	struct wiphy *wiphy = priv_to_wiphy(priv);
 	struct wireless_dev *wdev;
@@ -2211,16 +2261,21 @@ int orinoco_if_add(struct orinoco_private *priv,
 
 	/* Setup / override net_device fields */
 	dev->ieee80211_ptr = wdev;
-	dev->netdev_ops = &orinoco_netdev_ops;
 	dev->watchdog_timeo = HZ; /* 1 second timeout */
 	dev->wireless_handlers = &orinoco_handler_def;
 #ifdef WIRELESS_SPY
 	dev->wireless_data = &priv->wireless_data;
 #endif
+	/* Default to standard ops if not set */
+	if (ops)
+		dev->netdev_ops = ops;
+	else
+		dev->netdev_ops = &orinoco_netdev_ops;
+
 	/* we use the default eth_mac_addr for setting the MAC addr */
 
 	/* Reserve space in skb for the SNAP header */
-	dev->hard_header_len += ENCAPS_OVERHEAD;
+	dev->needed_headroom = ENCAPS_OVERHEAD;
 
 	netif_carrier_off(dev);
 
@@ -2305,7 +2360,7 @@ int orinoco_up(struct orinoco_private *priv)
 	unsigned long flags;
 	int err;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	priv->hw.ops->lock_irqsave(&priv->lock, &flags);
 
 	err = orinoco_reinit_firmware(priv);
 	if (err) {
@@ -2325,7 +2380,7 @@ int orinoco_up(struct orinoco_private *priv)
 	}
 
 exit:
-	spin_unlock_irqrestore(&priv->lock, flags);
+	priv->hw.ops->unlock_irqrestore(&priv->lock, &flags);
 
 	return 0;
 }
@@ -2337,7 +2392,7 @@ void orinoco_down(struct orinoco_private *priv)
 	unsigned long flags;
 	int err;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	priv->hw.ops->lock_irqsave(&priv->lock, &flags);
 	err = __orinoco_down(priv);
 	if (err)
 		printk(KERN_WARNING "%s: Error %d downing interface\n",
@@ -2345,7 +2400,7 @@ void orinoco_down(struct orinoco_private *priv)
 
 	netif_device_detach(dev);
 	priv->hw_unavailable++;
-	spin_unlock_irqrestore(&priv->lock, flags);
+	priv->hw.ops->unlock_irqrestore(&priv->lock, &flags);
 }
 EXPORT_SYMBOL(orinoco_down);
 
diff --git a/drivers/net/wireless/orinoco/main.h b/drivers/net/wireless/orinoco/main.h
index 21ab36cd76c..4dadf9880a9 100644
--- a/drivers/net/wireless/orinoco/main.h
+++ b/drivers/net/wireless/orinoco/main.h
@@ -33,18 +33,6 @@ int orinoco_commit(struct orinoco_private *priv);
 void orinoco_reset(struct work_struct *work);
 
 /* Information element helpers - find a home for these... */
-static inline u8 *orinoco_get_ie(u8 *data, size_t len,
-				 enum ieee80211_eid eid)
-{
-	u8 *p = data;
-	while ((p + 2) < (data + len)) {
-		if (p[0] == eid)
-			return p;
-		p += p[1] + 2;
-	}
-	return NULL;
-}
-
 #define WPA_OUI_TYPE	"\x00\x50\xF2\x01"
 #define WPA_SELECTOR_LEN 4
 static inline u8 *orinoco_get_wpa_ie(u8 *data, size_t len)
diff --git a/drivers/net/wireless/orinoco/orinoco.h b/drivers/net/wireless/orinoco/orinoco.h
index 665ef56f838..a6da86e0a70 100644
--- a/drivers/net/wireless/orinoco/orinoco.h
+++ b/drivers/net/wireless/orinoco/orinoco.h
@@ -131,6 +131,8 @@ struct orinoco_private {
 	u16 ap_density, rts_thresh;
 	u16 pm_on, pm_mcast, pm_period, pm_timeout;
 	u16 preamble;
+	u16 short_retry_limit, long_retry_limit;
+	u16 retry_lifetime;
 #ifdef WIRELESS_SPY
 	struct iw_spy_data spy_data; /* iwspy support */
 	struct iw_public_data	wireless_data;
@@ -188,12 +190,30 @@ extern void free_orinocodev(struct orinoco_private *priv);
 extern int orinoco_init(struct orinoco_private *priv);
 extern int orinoco_if_add(struct orinoco_private *priv,
 			  unsigned long base_addr,
-			  unsigned int irq);
+			  unsigned int irq,
+			  const struct net_device_ops *ops);
 extern void orinoco_if_del(struct orinoco_private *priv);
 extern int orinoco_up(struct orinoco_private *priv);
 extern void orinoco_down(struct orinoco_private *priv);
 extern irqreturn_t orinoco_interrupt(int irq, void *dev_id);
 
+extern void __orinoco_ev_info(struct net_device *dev, hermes_t *hw);
+extern void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw);
+
+int orinoco_process_xmit_skb(struct sk_buff *skb,
+			     struct net_device *dev,
+			     struct orinoco_private *priv,
+			     int *tx_control,
+			     u8 *mic);
+
+/* Common ndo functions exported for reuse by orinoco_usb */
+int orinoco_open(struct net_device *dev);
+int orinoco_stop(struct net_device *dev);
+struct net_device_stats *orinoco_get_stats(struct net_device *dev);
+void orinoco_set_multicast_list(struct net_device *dev);
+int orinoco_change_mtu(struct net_device *dev, int new_mtu);
+void orinoco_tx_timeout(struct net_device *dev);
+
 /********************************************************************/
 /* Locking and synchronization functions                            */
 /********************************************************************/
@@ -201,11 +221,11 @@ extern irqreturn_t orinoco_interrupt(int irq, void *dev_id);
 static inline int orinoco_lock(struct orinoco_private *priv,
 			       unsigned long *flags)
 {
-	spin_lock_irqsave(&priv->lock, *flags);
+	priv->hw.ops->lock_irqsave(&priv->lock, flags);
 	if (priv->hw_unavailable) {
 		DEBUG(1, "orinoco_lock() called with hw_unavailable (dev=%p)\n",
 		       priv->ndev);
-		spin_unlock_irqrestore(&priv->lock, *flags);
+		priv->hw.ops->unlock_irqrestore(&priv->lock, flags);
 		return -EBUSY;
 	}
 	return 0;
@@ -214,7 +234,17 @@ static inline int orinoco_lock(struct orinoco_private *priv,
 static inline void orinoco_unlock(struct orinoco_private *priv,
 				  unsigned long *flags)
 {
-	spin_unlock_irqrestore(&priv->lock, *flags);
+	priv->hw.ops->unlock_irqrestore(&priv->lock, flags);
+}
+
+static inline void orinoco_lock_irq(struct orinoco_private *priv)
+{
+	priv->hw.ops->lock_irq(&priv->lock);
+}
+
+static inline void orinoco_unlock_irq(struct orinoco_private *priv)
+{
+	priv->hw.ops->unlock_irq(&priv->lock);
 }
 
 /*** Navigate from net_device to orinoco_private ***/
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 1d4ada188ed..b16d5db52a4 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -50,7 +50,6 @@ MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket
  * struct orinoco_private */
 struct orinoco_pccard {
 	struct pcmcia_device	*p_dev;
-	dev_node_t node;
 
 	/* Used to handle hard reset */
 	/* yuck, we need this hack to work around the insanity of the
@@ -119,10 +118,6 @@ orinoco_cs_probe(struct pcmcia_device *link)
 	card->p_dev = link;
 	link->priv = priv;
 
-	/* Interrupt setup */
-	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	link->irq.Handler = orinoco_interrupt;
-
 	/* General socket configuration defaults can go here.  In this
 	 * client, we assume very little, and rely on the CIS for
 	 * almost everything.  In most clients, many details (i.e.,
@@ -144,8 +139,7 @@ static void orinoco_cs_detach(struct pcmcia_device *link)
 {
 	struct orinoco_private *priv = link->priv;
 
-	if (link->dev_node)
-		orinoco_if_del(priv);
+	orinoco_if_del(priv);
 
 	orinoco_cs_release(link);
 
@@ -230,7 +224,6 @@ static int
 orinoco_cs_config(struct pcmcia_device *link)
 {
 	struct orinoco_private *priv = link->priv;
-	struct orinoco_pccard *card = priv->card;
 	hermes_t *hw = &priv->hw;
 	int ret;
 	void __iomem *mem;
@@ -258,12 +251,7 @@ orinoco_cs_config(struct pcmcia_device *link)
 		goto failed;
 	}
 
-	/*
-	 * Allocate an interrupt line.  Note that this does not assign
-	 * a handler to the interrupt, unless the 'Handler' member of
-	 * the irq structure is initialized.
-	 */
-	ret = pcmcia_request_irq(link, &link->irq);
+	ret = pcmcia_request_irq(link, orinoco_interrupt);
 	if (ret)
 		goto failed;
 
@@ -285,9 +273,6 @@ orinoco_cs_config(struct pcmcia_device *link)
 	if (ret)
 		goto failed;
 
-	/* Ok, we have the configuration, prepare to register the netdev */
-	card->node.major = card->node.minor = 0;
-
 	/* Initialise the main driver */
 	if (orinoco_init(priv) != 0) {
 		printk(KERN_ERR PFX "orinoco_init() failed\n");
@@ -296,17 +281,11 @@ orinoco_cs_config(struct pcmcia_device *link)
 
 	/* Register an interface with the stack */
 	if (orinoco_if_add(priv, link->io.BasePort1,
-			   link->irq.AssignedIRQ) != 0) {
+			   link->irq, NULL) != 0) {
 		printk(KERN_ERR PFX "orinoco_if_add() failed\n");
 		goto failed;
 	}
 
-	/* At this point, the dev_node_t structure(s) needs to be
-	 * initialized and arranged in a linked list at link->dev_node. */
-	strcpy(card->node.dev_name, priv->ndev->name);
-	link->dev_node = &card->node; /* link->dev_node being non-NULL is also
-				       * used to indicate that the
-				       * net_device has been registered */
 	return 0;
 
  failed:
@@ -327,9 +306,9 @@ orinoco_cs_release(struct pcmcia_device *link)
 
 	/* We're committed to taking the device away now, so mark the
 	 * hardware as unavailable */
-	spin_lock_irqsave(&priv->lock, flags);
+	priv->hw.ops->lock_irqsave(&priv->lock, &flags);
 	priv->hw_unavailable++;
-	spin_unlock_irqrestore(&priv->lock, flags);
+	priv->hw.ops->unlock_irqrestore(&priv->lock, &flags);
 
 	pcmcia_disable_device(link);
 	if (priv->hw.iobase)
@@ -374,87 +353,90 @@ static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
 	"Pavel Roskin <proski@gnu.org>, et al)";
 
 static struct pcmcia_device_id orinoco_cs_ids[] = {
-	PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */
-	PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */
-	PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */
 	PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */
-	PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */
-	PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */
 	PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */
 	PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */
 	PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */
-	PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */
-	PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
 	PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */
 	PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */
 	PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0003), /* ARtem Onair Comcard 11 */
 	PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */
-	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
-	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
-	PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */
-	PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
 	PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */
 	PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */
 	PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), /* SpeedStream Wireless Adapter */
 	PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */
+	PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
+	PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f),
+	PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e),
+	PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842),
+	PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169),
+	PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb),
+	PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90),
+	PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916),
+	PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3),
+	PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c),
+	PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077),
+	PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92),
+	PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a),
+	PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410),
+	PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3),
+	PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a),
+	PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767),
+	PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed),
+	PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
+	PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
+	PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
+	PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
+#ifdef CONFIG_HERMES_PRISM
+	/* Only entries that certainly identify Prism chipset */
+	PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */
+	PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */
+	PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */
+	PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */
+	PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */
+	PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */
+	PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
+	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
+	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
+	PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */
+	PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
 	PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */
 	PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */
 	PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */
 	PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */
 	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */
 	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */
-	PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9),
-	PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
+	PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
 	PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5),
 	PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2),
-	PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f),
-	PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842),
-	PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e),
-	PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169),
-	PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb),
-	PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3),
 	PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18),
-	PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90),
+	PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3),
 	PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9),
 	PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae),
+	PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146),
 	PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac),
 	PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab),
-	PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916),
-	PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146),
-	PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3),
-	PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c),
-	PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
-	PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077),
+	PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9),
 	PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18),
 	PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77),
 	PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf),
-	PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92),
 	PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395),
-	PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a),
-	PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410),
-	PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3),
 	PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01),
-	PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a),
-	PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1),
 	PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1),
-	PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767),
+	PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1),
 	PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6),
-	PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed),
 	PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264),
 	PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178),
-	PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
-	PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
-	PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
 	PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757),
 	PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a),
-	PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
 	PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee),
 	PCMCIA_DEVICE_PROD_ID3("HFA3863", 0x355cb092),
 	PCMCIA_DEVICE_PROD_ID3("ISL37100P", 0x630d52b2),
 	PCMCIA_DEVICE_PROD_ID3("ISL37101P-10", 0xdd97a26b),
 	PCMCIA_DEVICE_PROD_ID3("ISL37300P", 0xc9049a39),
+#endif
 	PCMCIA_DEVICE_NULL,
 };
 MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids);
diff --git a/drivers/net/wireless/orinoco/orinoco_nortel.c b/drivers/net/wireless/orinoco/orinoco_nortel.c
index 075f446b313..bc3ea0b67a4 100644
--- a/drivers/net/wireless/orinoco/orinoco_nortel.c
+++ b/drivers/net/wireless/orinoco/orinoco_nortel.c
@@ -220,7 +220,7 @@ static int orinoco_nortel_init_one(struct pci_dev *pdev,
 		goto fail;
 	}
 
-	err = orinoco_if_add(priv, 0, 0);
+	err = orinoco_if_add(priv, 0, 0, NULL);
 	if (err) {
 		printk(KERN_ERR PFX "orinoco_if_add() failed\n");
 		goto fail;
diff --git a/drivers/net/wireless/orinoco/orinoco_pci.c b/drivers/net/wireless/orinoco/orinoco_pci.c
index bda5317cc59..468197f8667 100644
--- a/drivers/net/wireless/orinoco/orinoco_pci.c
+++ b/drivers/net/wireless/orinoco/orinoco_pci.c
@@ -170,7 +170,7 @@ static int orinoco_pci_init_one(struct pci_dev *pdev,
 		goto fail;
 	}
 
-	err = orinoco_if_add(priv, 0, 0);
+	err = orinoco_if_add(priv, 0, 0, NULL);
 	if (err) {
 		printk(KERN_ERR PFX "orinoco_if_add() failed\n");
 		goto fail;
diff --git a/drivers/net/wireless/orinoco/orinoco_plx.c b/drivers/net/wireless/orinoco/orinoco_plx.c
index e0d5874ab42..9358f4d2307 100644
--- a/drivers/net/wireless/orinoco/orinoco_plx.c
+++ b/drivers/net/wireless/orinoco/orinoco_plx.c
@@ -259,7 +259,7 @@ static int orinoco_plx_init_one(struct pci_dev *pdev,
 		goto fail;
 	}
 
-	err = orinoco_if_add(priv, 0, 0);
+	err = orinoco_if_add(priv, 0, 0, NULL);
 	if (err) {
 		printk(KERN_ERR PFX "orinoco_if_add() failed\n");
 		goto fail;
diff --git a/drivers/net/wireless/orinoco/orinoco_tmd.c b/drivers/net/wireless/orinoco/orinoco_tmd.c
index 88cbc7902aa..784605f0af1 100644
--- a/drivers/net/wireless/orinoco/orinoco_tmd.c
+++ b/drivers/net/wireless/orinoco/orinoco_tmd.c
@@ -156,7 +156,7 @@ static int orinoco_tmd_init_one(struct pci_dev *pdev,
 		goto fail;
 	}
 
-	err = orinoco_if_add(priv, 0, 0);
+	err = orinoco_if_add(priv, 0, 0, NULL);
 	if (err) {
 		printk(KERN_ERR PFX "orinoco_if_add() failed\n");
 		goto fail;
diff --git a/drivers/net/wireless/orinoco/orinoco_usb.c b/drivers/net/wireless/orinoco/orinoco_usb.c
new file mode 100644
index 00000000000..78f089baa8c
--- /dev/null
+++ b/drivers/net/wireless/orinoco/orinoco_usb.c
@@ -0,0 +1,1795 @@
+/*
+ * USB Orinoco driver
+ *
+ * Copyright (c) 2003 Manuel Estrada Sainz
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above.  If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL.  If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ *
+ * Queueing code based on linux-wlan-ng 0.2.1-pre5
+ *
+ * Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+ *
+ *	The license is the same as above.
+ *
+ * Initialy based on USB Skeleton driver - 0.7
+ *
+ * Copyright (c) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation; either version 2 of
+ *	the License, or (at your option) any later version.
+ *
+ * NOTE: The original USB Skeleton driver is GPL, but all that code is
+ * gone so MPL/GPL applies.
+ */
+
+#define DRIVER_NAME "orinoco_usb"
+#define PFX DRIVER_NAME ": "
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/fcntl.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/smp_lock.h>
+#include <linux/usb.h>
+#include <linux/timer.h>
+
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <linux/wireless.h>
+#include <linux/firmware.h>
+
+#include "mic.h"
+#include "orinoco.h"
+
+#ifndef URB_ASYNC_UNLINK
+#define URB_ASYNC_UNLINK 0
+#endif
+
+/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */
+static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
+#define ENCAPS_OVERHEAD		(sizeof(encaps_hdr) + 2)
+
+struct header_struct {
+	/* 802.3 */
+	u8 dest[ETH_ALEN];
+	u8 src[ETH_ALEN];
+	__be16 len;
+	/* 802.2 */
+	u8 dsap;
+	u8 ssap;
+	u8 ctrl;
+	/* SNAP */
+	u8 oui[3];
+	__be16 ethertype;
+} __attribute__ ((packed));
+
+struct ez_usb_fw {
+	u16 size;
+	const u8 *code;
+};
+
+static struct ez_usb_fw firmware = {
+	.size = 0,
+	.code = NULL,
+};
+
+#ifdef CONFIG_USB_DEBUG
+static int debug = 1;
+#else
+static int debug;
+#endif
+
+/* Debugging macros */
+#undef dbg
+#define dbg(format, arg...) \
+	do { if (debug) printk(KERN_DEBUG PFX "%s: " format "\n", \
+			       __func__ , ## arg); } while (0)
+#undef err
+#define err(format, arg...) \
+	do { printk(KERN_ERR PFX format "\n", ## arg); } while (0)
+
+/* Module paramaters */
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
+
+MODULE_FIRMWARE("orinoco_ezusb_fw");
+
+/*
+ * Under some conditions, the card gets stuck and stops paying attention
+ * to the world (i.e. data communication stalls) until we do something to
+ * it.  Sending an INQ_TALLIES command seems to be enough and should be
+ * harmless otherwise.  This behaviour has been observed when using the
+ * driver on a systemimager client during installation.  In the past a
+ * timer was used to send INQ_TALLIES commands when there was no other
+ * activity, but it was troublesome and was removed.
+ */
+
+#define USB_COMPAQ_VENDOR_ID     0x049f /* Compaq Computer Corp. */
+#define USB_COMPAQ_WL215_ID      0x001f /* Compaq WL215 USB Adapter */
+#define USB_COMPAQ_W200_ID       0x0076 /* Compaq W200 USB Adapter */
+#define USB_HP_WL215_ID          0x0082 /* Compaq WL215 USB Adapter */
+
+#define USB_MELCO_VENDOR_ID      0x0411
+#define USB_BUFFALO_L11_ID       0x0006 /* BUFFALO WLI-USB-L11 */
+#define USB_BUFFALO_L11G_WR_ID   0x000B /* BUFFALO WLI-USB-L11G-WR */
+#define USB_BUFFALO_L11G_ID      0x000D /* BUFFALO WLI-USB-L11G */
+
+#define USB_LUCENT_VENDOR_ID     0x047E /* Lucent Technologies */
+#define USB_LUCENT_ORINOCO_ID    0x0300 /* Lucent/Agere Orinoco USB Client */
+
+#define USB_AVAYA8_VENDOR_ID     0x0D98
+#define USB_AVAYAE_VENDOR_ID     0x0D9E
+#define USB_AVAYA_WIRELESS_ID    0x0300 /* Avaya Wireless USB Card */
+
+#define USB_AGERE_VENDOR_ID      0x0D4E /* Agere Systems */
+#define USB_AGERE_MODEL0801_ID   0x1000 /* Wireless USB Card Model 0801 */
+#define USB_AGERE_MODEL0802_ID   0x1001 /* Wireless USB Card Model 0802 */
+#define USB_AGERE_REBRANDED_ID   0x047A /* WLAN USB Card */
+
+#define USB_ELSA_VENDOR_ID       0x05CC
+#define USB_ELSA_AIRLANCER_ID    0x3100 /* ELSA AirLancer USB-11 */
+
+#define USB_LEGEND_VENDOR_ID     0x0E7C
+#define USB_LEGEND_JOYNET_ID     0x0300 /* Joynet WLAN USB Card */
+
+#define USB_SAMSUNG_VENDOR_ID    0x04E8
+#define USB_SAMSUNG_SEW2001U1_ID 0x5002 /* Samsung SEW-2001u Card */
+#define USB_SAMSUNG_SEW2001U2_ID 0x5B11 /* Samsung SEW-2001u Card */
+#define USB_SAMSUNG_SEW2003U_ID  0x7011 /* Samsung SEW-2003U Card */
+
+#define USB_IGATE_VENDOR_ID      0x0681
+#define USB_IGATE_IGATE_11M_ID   0x0012 /* I-GATE 11M USB Card */
+
+#define USB_FUJITSU_VENDOR_ID    0x0BF8
+#define USB_FUJITSU_E1100_ID     0x1002 /* connect2AIR WLAN E-1100 USB */
+
+#define USB_2WIRE_VENDOR_ID      0x1630
+#define USB_2WIRE_WIRELESS_ID    0xff81 /* 2Wire Wireless USB adapter */
+
+
+#define EZUSB_REQUEST_FW_TRANS		0xA0
+#define EZUSB_REQUEST_TRIGER		0xAA
+#define EZUSB_REQUEST_TRIG_AC		0xAC
+#define EZUSB_CPUCS_REG			0x7F92
+
+#define EZUSB_RID_TX			0x0700
+#define EZUSB_RID_RX			0x0701
+#define EZUSB_RID_INIT1			0x0702
+#define EZUSB_RID_ACK			0x0710
+#define EZUSB_RID_READ_PDA		0x0800
+#define EZUSB_RID_PROG_INIT		0x0852
+#define EZUSB_RID_PROG_SET_ADDR		0x0853
+#define EZUSB_RID_PROG_BYTES		0x0854
+#define EZUSB_RID_PROG_END		0x0855
+#define EZUSB_RID_DOCMD			0x0860
+
+/* Recognize info frames */
+#define EZUSB_IS_INFO(id)		((id >= 0xF000) && (id <= 0xF2FF))
+
+#define EZUSB_MAGIC			0x0210
+
+#define EZUSB_FRAME_DATA		1
+#define EZUSB_FRAME_CONTROL		2
+
+#define DEF_TIMEOUT			(3*HZ)
+
+#define BULK_BUF_SIZE			2048
+
+#define MAX_DL_SIZE (BULK_BUF_SIZE - sizeof(struct ezusb_packet))
+
+#define FW_BUF_SIZE			64
+#define FW_VAR_OFFSET_PTR		0x359
+#define FW_VAR_VALUE			0
+#define FW_HOLE_START			0x100
+#define FW_HOLE_END			0x300
+
+struct ezusb_packet {
+	__le16 magic;		/* 0x0210 */
+	u8 req_reply_count;
+	u8 ans_reply_count;
+	__le16 frame_type;	/* 0x01 for data frames, 0x02 otherwise */
+	__le16 size;		/* transport size */
+	__le16 crc;		/* CRC up to here */
+	__le16 hermes_len;
+	__le16 hermes_rid;
+	u8 data[0];
+} __attribute__ ((packed));
+
+/* Table of devices that work or may work with this driver */
+static struct usb_device_id ezusb_table[] = {
+	{USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_COMPAQ_WL215_ID)},
+	{USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_HP_WL215_ID)},
+	{USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_COMPAQ_W200_ID)},
+	{USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11_ID)},
+	{USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11G_WR_ID)},
+	{USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11G_ID)},
+	{USB_DEVICE(USB_LUCENT_VENDOR_ID, USB_LUCENT_ORINOCO_ID)},
+	{USB_DEVICE(USB_AVAYA8_VENDOR_ID, USB_AVAYA_WIRELESS_ID)},
+	{USB_DEVICE(USB_AVAYAE_VENDOR_ID, USB_AVAYA_WIRELESS_ID)},
+	{USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_MODEL0801_ID)},
+	{USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_MODEL0802_ID)},
+	{USB_DEVICE(USB_ELSA_VENDOR_ID, USB_ELSA_AIRLANCER_ID)},
+	{USB_DEVICE(USB_LEGEND_VENDOR_ID, USB_LEGEND_JOYNET_ID)},
+	{USB_DEVICE_VER(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2001U1_ID,
+			0, 0)},
+	{USB_DEVICE(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2001U2_ID)},
+	{USB_DEVICE(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2003U_ID)},
+	{USB_DEVICE(USB_IGATE_VENDOR_ID, USB_IGATE_IGATE_11M_ID)},
+	{USB_DEVICE(USB_FUJITSU_VENDOR_ID, USB_FUJITSU_E1100_ID)},
+	{USB_DEVICE(USB_2WIRE_VENDOR_ID, USB_2WIRE_WIRELESS_ID)},
+	{USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_REBRANDED_ID)},
+	{}			/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, ezusb_table);
+
+/* Structure to hold all of our device specific stuff */
+struct ezusb_priv {
+	struct usb_device *udev;
+	struct net_device *dev;
+	struct mutex mtx;
+	spinlock_t req_lock;
+	struct list_head req_pending;
+	struct list_head req_active;
+	spinlock_t reply_count_lock;
+	u16 hermes_reg_fake[0x40];
+	u8 *bap_buf;
+	struct urb *read_urb;
+	int read_pipe;
+	int write_pipe;
+	u8 reply_count;
+};
+
+enum ezusb_state {
+	EZUSB_CTX_START,
+	EZUSB_CTX_QUEUED,
+	EZUSB_CTX_REQ_SUBMITTED,
+	EZUSB_CTX_REQ_COMPLETE,
+	EZUSB_CTX_RESP_RECEIVED,
+	EZUSB_CTX_REQ_TIMEOUT,
+	EZUSB_CTX_REQ_FAILED,
+	EZUSB_CTX_RESP_TIMEOUT,
+	EZUSB_CTX_REQSUBMIT_FAIL,
+	EZUSB_CTX_COMPLETE,
+};
+
+struct request_context {
+	struct list_head list;
+	atomic_t refcount;
+	struct completion done;	/* Signals that CTX is dead */
+	int killed;
+	struct urb *outurb;	/* OUT for req pkt */
+	struct ezusb_priv *upriv;
+	struct ezusb_packet *buf;
+	int buf_length;
+	struct timer_list timer;	/* Timeout handling */
+	enum ezusb_state state;	/* Current state */
+	/* the RID that we will wait for */
+	u16 out_rid;
+	u16 in_rid;
+};
+
+
+/* Forward declarations */
+static void ezusb_ctx_complete(struct request_context *ctx);
+static void ezusb_req_queue_run(struct ezusb_priv *upriv);
+static void ezusb_bulk_in_callback(struct urb *urb);
+
+static inline u8 ezusb_reply_inc(u8 count)
+{
+	if (count < 0x7F)
+		return count + 1;
+	else
+		return 1;
+}
+
+static void ezusb_request_context_put(struct request_context *ctx)
+{
+	if (!atomic_dec_and_test(&ctx->refcount))
+		return;
+
+	WARN_ON(!ctx->done.done);
+	BUG_ON(ctx->outurb->status == -EINPROGRESS);
+	BUG_ON(timer_pending(&ctx->timer));
+	usb_free_urb(ctx->outurb);
+	kfree(ctx->buf);
+	kfree(ctx);
+}
+
+static inline void ezusb_mod_timer(struct ezusb_priv *upriv,
+				   struct timer_list *timer,
+				   unsigned long expire)
+{
+	if (!upriv->udev)
+		return;
+	mod_timer(timer, expire);
+}
+
+static void ezusb_request_timerfn(u_long _ctx)
+{
+	struct request_context *ctx = (void *) _ctx;
+
+	ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK;
+	if (usb_unlink_urb(ctx->outurb) == -EINPROGRESS) {
+		ctx->state = EZUSB_CTX_REQ_TIMEOUT;
+	} else {
+		ctx->state = EZUSB_CTX_RESP_TIMEOUT;
+		dbg("couldn't unlink");
+		atomic_inc(&ctx->refcount);
+		ctx->killed = 1;
+		ezusb_ctx_complete(ctx);
+		ezusb_request_context_put(ctx);
+	}
+};
+
+static struct request_context *ezusb_alloc_ctx(struct ezusb_priv *upriv,
+					       u16 out_rid, u16 in_rid)
+{
+	struct request_context *ctx;
+
+	ctx = kmalloc(sizeof(*ctx), GFP_ATOMIC);
+	if (!ctx)
+		return NULL;
+
+	memset(ctx, 0, sizeof(*ctx));
+
+	ctx->buf = kmalloc(BULK_BUF_SIZE, GFP_ATOMIC);
+	if (!ctx->buf) {
+		kfree(ctx);
+		return NULL;
+	}
+	ctx->outurb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!ctx->outurb) {
+		kfree(ctx->buf);
+		kfree(ctx);
+		return NULL;
+	}
+
+	ctx->upriv = upriv;
+	ctx->state = EZUSB_CTX_START;
+	ctx->out_rid = out_rid;
+	ctx->in_rid = in_rid;
+
+	atomic_set(&ctx->refcount, 1);
+	init_completion(&ctx->done);
+
+	init_timer(&ctx->timer);
+	ctx->timer.function = ezusb_request_timerfn;
+	ctx->timer.data = (u_long) ctx;
+	return ctx;
+}
+
+
+/* Hopefully the real complete_all will soon be exported, in the mean
+ * while this should work. */
+static inline void ezusb_complete_all(struct completion *comp)
+{
+	complete(comp);
+	complete(comp);
+	complete(comp);
+	complete(comp);
+}
+
+static void ezusb_ctx_complete(struct request_context *ctx)
+{
+	struct ezusb_priv *upriv = ctx->upriv;
+	unsigned long flags;
+
+	spin_lock_irqsave(&upriv->req_lock, flags);
+
+	list_del_init(&ctx->list);
+	if (upriv->udev) {
+		spin_unlock_irqrestore(&upriv->req_lock, flags);
+		ezusb_req_queue_run(upriv);
+		spin_lock_irqsave(&upriv->req_lock, flags);
+	}
+
+	switch (ctx->state) {
+	case EZUSB_CTX_COMPLETE:
+	case EZUSB_CTX_REQSUBMIT_FAIL:
+	case EZUSB_CTX_REQ_FAILED:
+	case EZUSB_CTX_REQ_TIMEOUT:
+	case EZUSB_CTX_RESP_TIMEOUT:
+		spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+		if ((ctx->out_rid == EZUSB_RID_TX) && upriv->dev) {
+			struct net_device *dev = upriv->dev;
+			struct orinoco_private *priv = ndev_priv(dev);
+			struct net_device_stats *stats = &priv->stats;
+
+			if (ctx->state != EZUSB_CTX_COMPLETE)
+				stats->tx_errors++;
+			else
+				stats->tx_packets++;
+
+			netif_wake_queue(dev);
+		}
+		ezusb_complete_all(&ctx->done);
+		ezusb_request_context_put(ctx);
+		break;
+
+	default:
+		spin_unlock_irqrestore(&upriv->req_lock, flags);
+		if (!upriv->udev) {
+			/* This is normal, as all request contexts get flushed
+			 * when the device is disconnected */
+			err("Called, CTX not terminating, but device gone");
+			ezusb_complete_all(&ctx->done);
+			ezusb_request_context_put(ctx);
+			break;
+		}
+
+		err("Called, CTX not in terminating state.");
+		/* Things are really bad if this happens. Just leak
+		 * the CTX because it may still be linked to the
+		 * queue or the OUT urb may still be active.
+		 * Just leaking at least prevents an Oops or Panic.
+		 */
+		break;
+	}
+}
+
+/**
+ * ezusb_req_queue_run:
+ * Description:
+ *	Note: Only one active CTX at any one time, because there's no
+ *	other (reliable) way to match the response URB to the correct
+ *	CTX.
+ **/
+static void ezusb_req_queue_run(struct ezusb_priv *upriv)
+{
+	unsigned long flags;
+	struct request_context *ctx;
+	int result;
+
+	spin_lock_irqsave(&upriv->req_lock, flags);
+
+	if (!list_empty(&upriv->req_active))
+		goto unlock;
+
+	if (list_empty(&upriv->req_pending))
+		goto unlock;
+
+	ctx =
+	    list_entry(upriv->req_pending.next, struct request_context,
+		       list);
+
+	if (!ctx->upriv->udev)
+		goto unlock;
+
+	/* We need to split this off to avoid a race condition */
+	list_move_tail(&ctx->list, &upriv->req_active);
+
+	if (ctx->state == EZUSB_CTX_QUEUED) {
+		atomic_inc(&ctx->refcount);
+		result = usb_submit_urb(ctx->outurb, GFP_ATOMIC);
+		if (result) {
+			ctx->state = EZUSB_CTX_REQSUBMIT_FAIL;
+
+			spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+			err("Fatal, failed to submit command urb."
+			    " error=%d\n", result);
+
+			ezusb_ctx_complete(ctx);
+			ezusb_request_context_put(ctx);
+			goto done;
+		}
+
+		ctx->state = EZUSB_CTX_REQ_SUBMITTED;
+		ezusb_mod_timer(ctx->upriv, &ctx->timer,
+				jiffies + DEF_TIMEOUT);
+	}
+
+ unlock:
+	spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+ done:
+	return;
+}
+
+static void ezusb_req_enqueue_run(struct ezusb_priv *upriv,
+				  struct request_context *ctx)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&upriv->req_lock, flags);
+
+	if (!ctx->upriv->udev) {
+		spin_unlock_irqrestore(&upriv->req_lock, flags);
+		goto done;
+	}
+	atomic_inc(&ctx->refcount);
+	list_add_tail(&ctx->list, &upriv->req_pending);
+	spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+	ctx->state = EZUSB_CTX_QUEUED;
+	ezusb_req_queue_run(upriv);
+
+ done:
+	return;
+}
+
+static void ezusb_request_out_callback(struct urb *urb)
+{
+	unsigned long flags;
+	enum ezusb_state state;
+	struct request_context *ctx = urb->context;
+	struct ezusb_priv *upriv = ctx->upriv;
+
+	spin_lock_irqsave(&upriv->req_lock, flags);
+
+	del_timer(&ctx->timer);
+
+	if (ctx->killed) {
+		spin_unlock_irqrestore(&upriv->req_lock, flags);
+		pr_warning("interrupt called with dead ctx");
+		goto out;
+	}
+
+	state = ctx->state;
+
+	if (urb->status == 0) {
+		switch (state) {
+		case EZUSB_CTX_REQ_SUBMITTED:
+			if (ctx->in_rid) {
+				ctx->state = EZUSB_CTX_REQ_COMPLETE;
+				/* reply URB still pending */
+				ezusb_mod_timer(upriv, &ctx->timer,
+						jiffies + DEF_TIMEOUT);
+				spin_unlock_irqrestore(&upriv->req_lock,
+						       flags);
+				break;
+			}
+			/* fall through */
+		case EZUSB_CTX_RESP_RECEIVED:
+			/* IN already received before this OUT-ACK */
+			ctx->state = EZUSB_CTX_COMPLETE;
+			spin_unlock_irqrestore(&upriv->req_lock, flags);
+			ezusb_ctx_complete(ctx);
+			break;
+
+		default:
+			spin_unlock_irqrestore(&upriv->req_lock, flags);
+			err("Unexpected state(0x%x, %d) in OUT URB",
+			    state, urb->status);
+			break;
+		}
+	} else {
+		/* If someone cancels the OUT URB then its status
+		 * should be either -ECONNRESET or -ENOENT.
+		 */
+		switch (state) {
+		case EZUSB_CTX_REQ_SUBMITTED:
+		case EZUSB_CTX_RESP_RECEIVED:
+			ctx->state = EZUSB_CTX_REQ_FAILED;
+			/* fall through */
+
+		case EZUSB_CTX_REQ_FAILED:
+		case EZUSB_CTX_REQ_TIMEOUT:
+			spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+			ezusb_ctx_complete(ctx);
+			break;
+
+		default:
+			spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+			err("Unexpected state(0x%x, %d) in OUT URB",
+			    state, urb->status);
+			break;
+		}
+	}
+ out:
+	ezusb_request_context_put(ctx);
+}
+
+static void ezusb_request_in_callback(struct ezusb_priv *upriv,
+				      struct urb *urb)
+{
+	struct ezusb_packet *ans = urb->transfer_buffer;
+	struct request_context *ctx = NULL;
+	enum ezusb_state state;
+	unsigned long flags;
+
+	/* Find the CTX on the active queue that requested this URB */
+	spin_lock_irqsave(&upriv->req_lock, flags);
+	if (upriv->udev) {
+		struct list_head *item;
+
+		list_for_each(item, &upriv->req_active) {
+			struct request_context *c;
+			int reply_count;
+
+			c = list_entry(item, struct request_context, list);
+			reply_count =
+			    ezusb_reply_inc(c->buf->req_reply_count);
+			if ((ans->ans_reply_count == reply_count)
+			    && (le16_to_cpu(ans->hermes_rid) == c->in_rid)) {
+				ctx = c;
+				break;
+			}
+			dbg("Skipped (0x%x/0x%x) (%d/%d)",
+			    le16_to_cpu(ans->hermes_rid),
+			    c->in_rid, ans->ans_reply_count, reply_count);
+		}
+	}
+
+	if (ctx == NULL) {
+		spin_unlock_irqrestore(&upriv->req_lock, flags);
+		err("%s: got unexpected RID: 0x%04X", __func__,
+		    le16_to_cpu(ans->hermes_rid));
+		ezusb_req_queue_run(upriv);
+		return;
+	}
+
+	/* The data we want is in the in buffer, exchange */
+	urb->transfer_buffer = ctx->buf;
+	ctx->buf = (void *) ans;
+	ctx->buf_length = urb->actual_length;
+
+	state = ctx->state;
+	switch (state) {
+	case EZUSB_CTX_REQ_SUBMITTED:
+		/* We have received our response URB before
+		 * our request has been acknowledged. Do NOT
+		 * destroy our CTX yet, because our OUT URB
+		 * is still alive ...
+		 */
+		ctx->state = EZUSB_CTX_RESP_RECEIVED;
+		spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+		/* Let the machine continue running. */
+		break;
+
+	case EZUSB_CTX_REQ_COMPLETE:
+		/* This is the usual path: our request
+		 * has already been acknowledged, and
+		 * we have now received the reply.
+		 */
+		ctx->state = EZUSB_CTX_COMPLETE;
+
+		/* Stop the intimer */
+		del_timer(&ctx->timer);
+		spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+		/* Call the completion handler */
+		ezusb_ctx_complete(ctx);
+		break;
+
+	default:
+		spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+		pr_warning("Matched IN URB, unexpected context state(0x%x)",
+		     state);
+		/* Throw this CTX away and try submitting another */
+		del_timer(&ctx->timer);
+		ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK;
+		usb_unlink_urb(ctx->outurb);
+		ezusb_req_queue_run(upriv);
+		break;
+	}			/* switch */
+}
+
+
+static void ezusb_req_ctx_wait(struct ezusb_priv *upriv,
+			       struct request_context *ctx)
+{
+	switch (ctx->state) {
+	case EZUSB_CTX_QUEUED:
+	case EZUSB_CTX_REQ_SUBMITTED:
+	case EZUSB_CTX_REQ_COMPLETE:
+	case EZUSB_CTX_RESP_RECEIVED:
+		if (in_softirq()) {
+			/* If we get called from a timer, timeout timers don't
+			 * get the chance to run themselves. So we make sure
+			 * that we don't sleep for ever */
+			int msecs = DEF_TIMEOUT * (1000 / HZ);
+			while (!ctx->done.done && msecs--)
+				udelay(1000);
+		} else {
+			wait_event_interruptible(ctx->done.wait,
+						 ctx->done.done);
+		}
+		break;
+	default:
+		/* Done or failed - nothing to wait for */
+		break;
+	}
+}
+
+static inline u16 build_crc(struct ezusb_packet *data)
+{
+	u16 crc = 0;
+	u8 *bytes = (u8 *)data;
+	int i;
+
+	for (i = 0; i < 8; i++)
+		crc = (crc << 1) + bytes[i];
+
+	return crc;
+}
+
+/**
+ * ezusb_fill_req:
+ *
+ * if data == NULL and length > 0 the data is assumed to be already in
+ * the target buffer and only the header is filled.
+ *
+ */
+static int ezusb_fill_req(struct ezusb_packet *req, u16 length, u16 rid,
+			  const void *data, u16 frame_type, u8 reply_count)
+{
+	int total_size = sizeof(*req) + length;
+
+	BUG_ON(total_size > BULK_BUF_SIZE);
+
+	req->magic = cpu_to_le16(EZUSB_MAGIC);
+	req->req_reply_count = reply_count;
+	req->ans_reply_count = 0;
+	req->frame_type = cpu_to_le16(frame_type);
+	req->size = cpu_to_le16(length + 4);
+	req->crc = cpu_to_le16(build_crc(req));
+	req->hermes_len = cpu_to_le16(HERMES_BYTES_TO_RECLEN(length));
+	req->hermes_rid = cpu_to_le16(rid);
+	if (data)
+		memcpy(req->data, data, length);
+	return total_size;
+}
+
+static int ezusb_submit_in_urb(struct ezusb_priv *upriv)
+{
+	int retval = 0;
+	void *cur_buf = upriv->read_urb->transfer_buffer;
+
+	if (upriv->read_urb->status == -EINPROGRESS) {
+		dbg("urb busy, not resubmiting");
+		retval = -EBUSY;
+		goto exit;
+	}
+	usb_fill_bulk_urb(upriv->read_urb, upriv->udev, upriv->read_pipe,
+			  cur_buf, BULK_BUF_SIZE,
+			  ezusb_bulk_in_callback, upriv);
+	upriv->read_urb->transfer_flags = 0;
+	retval = usb_submit_urb(upriv->read_urb, GFP_ATOMIC);
+	if (retval)
+		err("%s submit failed %d", __func__, retval);
+
+ exit:
+	return retval;
+}
+
+static inline int ezusb_8051_cpucs(struct ezusb_priv *upriv, int reset)
+{
+	u8 res_val = reset;	/* avoid argument promotion */
+
+	if (!upriv->udev) {
+		err("%s: !upriv->udev", __func__);
+		return -EFAULT;
+	}
+	return usb_control_msg(upriv->udev,
+			       usb_sndctrlpipe(upriv->udev, 0),
+			       EZUSB_REQUEST_FW_TRANS,
+			       USB_TYPE_VENDOR | USB_RECIP_DEVICE |
+			       USB_DIR_OUT, EZUSB_CPUCS_REG, 0, &res_val,
+			       sizeof(res_val), DEF_TIMEOUT);
+}
+
+static int ezusb_firmware_download(struct ezusb_priv *upriv,
+				   struct ez_usb_fw *fw)
+{
+	u8 fw_buffer[FW_BUF_SIZE];
+	int retval, addr;
+	int variant_offset;
+
+	/*
+	 * This byte is 1 and should be replaced with 0.  The offset is
+	 * 0x10AD in version 0.0.6.  The byte in question should follow
+	 * the end of the code pointed to by the jump in the beginning
+	 * of the firmware.  Also, it is read by code located at 0x358.
+	 */
+	variant_offset = be16_to_cpup((__be16 *) &fw->code[FW_VAR_OFFSET_PTR]);
+	if (variant_offset >= fw->size) {
+		printk(KERN_ERR PFX "Invalid firmware variant offset: "
+		       "0x%04x\n", variant_offset);
+		retval = -EINVAL;
+		goto fail;
+	}
+
+	retval = ezusb_8051_cpucs(upriv, 1);
+	if (retval < 0)
+		goto fail;
+	for (addr = 0; addr < fw->size; addr += FW_BUF_SIZE) {
+		/* 0x100-0x300 should be left alone, it contains card
+		 * specific data, like USB enumeration information */
+		if ((addr >= FW_HOLE_START) && (addr < FW_HOLE_END))
+			continue;
+
+		memcpy(fw_buffer, &fw->code[addr], FW_BUF_SIZE);
+		if (variant_offset >= addr &&
+		    variant_offset < addr + FW_BUF_SIZE) {
+			dbg("Patching card_variant byte at 0x%04X",
+			    variant_offset);
+			fw_buffer[variant_offset - addr] = FW_VAR_VALUE;
+		}
+		retval = usb_control_msg(upriv->udev,
+					 usb_sndctrlpipe(upriv->udev, 0),
+					 EZUSB_REQUEST_FW_TRANS,
+					 USB_TYPE_VENDOR | USB_RECIP_DEVICE
+					 | USB_DIR_OUT,
+					 addr, 0x0,
+					 fw_buffer, FW_BUF_SIZE,
+					 DEF_TIMEOUT);
+
+		if (retval < 0)
+			goto fail;
+	}
+	retval = ezusb_8051_cpucs(upriv, 0);
+	if (retval < 0)
+		goto fail;
+
+	goto exit;
+ fail:
+	printk(KERN_ERR PFX "Firmware download failed, error %d\n",
+	       retval);
+ exit:
+	return retval;
+}
+
+static int ezusb_access_ltv(struct ezusb_priv *upriv,
+			    struct request_context *ctx,
+			    u16 length, const void *data, u16 frame_type,
+			    void *ans_buff, int ans_size, u16 *ans_length)
+{
+	int req_size;
+	int retval = 0;
+	enum ezusb_state state;
+
+	BUG_ON(in_irq());
+
+	if (!upriv->udev) {
+		dbg("Device disconnected");
+		return -ENODEV;
+	}
+
+	if (upriv->read_urb->status != -EINPROGRESS)
+		err("%s: in urb not pending", __func__);
+
+	/* protect upriv->reply_count, guarantee sequential numbers */
+	spin_lock_bh(&upriv->reply_count_lock);
+	req_size = ezusb_fill_req(ctx->buf, length, ctx->out_rid, data,
+				  frame_type, upriv->reply_count);
+	usb_fill_bulk_urb(ctx->outurb, upriv->udev, upriv->write_pipe,
+			  ctx->buf, req_size,
+			  ezusb_request_out_callback, ctx);
+
+	if (ctx->in_rid)
+		upriv->reply_count = ezusb_reply_inc(upriv->reply_count);
+
+	ezusb_req_enqueue_run(upriv, ctx);
+
+	spin_unlock_bh(&upriv->reply_count_lock);
+
+	if (ctx->in_rid)
+		ezusb_req_ctx_wait(upriv, ctx);
+
+	state = ctx->state;
+	switch (state) {
+	case EZUSB_CTX_COMPLETE:
+		retval = ctx->outurb->status;
+		break;
+
+	case EZUSB_CTX_QUEUED:
+	case EZUSB_CTX_REQ_SUBMITTED:
+		if (!ctx->in_rid)
+			break;
+	default:
+		err("%s: Unexpected context state %d", __func__,
+		    state);
+		/* fall though */
+	case EZUSB_CTX_REQ_TIMEOUT:
+	case EZUSB_CTX_REQ_FAILED:
+	case EZUSB_CTX_RESP_TIMEOUT:
+	case EZUSB_CTX_REQSUBMIT_FAIL:
+		printk(KERN_ERR PFX "Access failed, resetting (state %d,"
+		       " reply_count %d)\n", state, upriv->reply_count);
+		upriv->reply_count = 0;
+		if (state == EZUSB_CTX_REQ_TIMEOUT
+		    || state == EZUSB_CTX_RESP_TIMEOUT) {
+			printk(KERN_ERR PFX "ctx timed out\n");
+			retval = -ETIMEDOUT;
+		} else {
+			printk(KERN_ERR PFX "ctx failed\n");
+			retval = -EFAULT;
+		}
+		goto exit;
+		break;
+	}
+	if (ctx->in_rid) {
+		struct ezusb_packet *ans = ctx->buf;
+		int exp_len;
+
+		if (ans->hermes_len != 0)
+			exp_len = le16_to_cpu(ans->hermes_len) * 2 + 12;
+		else
+			exp_len = 14;
+
+		if (exp_len != ctx->buf_length) {
+			err("%s: length mismatch for RID 0x%04x: "
+			    "expected %d, got %d", __func__,
+			    ctx->in_rid, exp_len, ctx->buf_length);
+			retval = -EIO;
+			goto exit;
+		}
+
+		if (ans_buff)
+			memcpy(ans_buff, ans->data,
+			       min_t(int, exp_len, ans_size));
+		if (ans_length)
+			*ans_length = le16_to_cpu(ans->hermes_len);
+	}
+ exit:
+	ezusb_request_context_put(ctx);
+	return retval;
+}
+
+static int ezusb_write_ltv(hermes_t *hw, int bap, u16 rid,
+			   u16 length, const void *data)
+{
+	struct ezusb_priv *upriv = hw->priv;
+	u16 frame_type;
+	struct request_context *ctx;
+
+	if (length == 0)
+		return -EINVAL;
+
+	length = HERMES_RECLEN_TO_BYTES(length);
+
+	/* On memory mapped devices HERMES_RID_CNFGROUPADDRESSES can be
+	 * set to be empty, but the USB bridge doesn't like it */
+	if (length == 0)
+		return 0;
+
+	ctx = ezusb_alloc_ctx(upriv, rid, EZUSB_RID_ACK);
+	if (!ctx)
+		return -ENOMEM;
+
+	if (rid == EZUSB_RID_TX)
+		frame_type = EZUSB_FRAME_DATA;
+	else
+		frame_type = EZUSB_FRAME_CONTROL;
+
+	return ezusb_access_ltv(upriv, ctx, length, data, frame_type,
+				NULL, 0, NULL);
+}
+
+static int ezusb_read_ltv(hermes_t *hw, int bap, u16 rid,
+			  unsigned bufsize, u16 *length, void *buf)
+{
+	struct ezusb_priv *upriv = hw->priv;
+	struct request_context *ctx;
+
+	if ((bufsize < 0) || (bufsize % 2))
+		return -EINVAL;
+
+	ctx = ezusb_alloc_ctx(upriv, rid, rid);
+	if (!ctx)
+		return -ENOMEM;
+
+	return ezusb_access_ltv(upriv, ctx, 0, NULL, EZUSB_FRAME_CONTROL,
+				buf, bufsize, length);
+}
+
+static int ezusb_doicmd_wait(hermes_t *hw, u16 cmd, u16 parm0, u16 parm1,
+			     u16 parm2, struct hermes_response *resp)
+{
+	struct ezusb_priv *upriv = hw->priv;
+	struct request_context *ctx;
+
+	__le16 data[4] = {
+		cpu_to_le16(cmd),
+		cpu_to_le16(parm0),
+		cpu_to_le16(parm1),
+		cpu_to_le16(parm2),
+	};
+	dbg("0x%04X, parm0 0x%04X, parm1 0x%04X, parm2 0x%04X",
+	    cmd, parm0, parm1, parm2);
+	ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_DOCMD, EZUSB_RID_ACK);
+	if (!ctx)
+		return -ENOMEM;
+
+	return ezusb_access_ltv(upriv, ctx, sizeof(data), &data,
+				EZUSB_FRAME_CONTROL, NULL, 0, NULL);
+}
+
+static int ezusb_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
+			    struct hermes_response *resp)
+{
+	struct ezusb_priv *upriv = hw->priv;
+	struct request_context *ctx;
+
+	__le16 data[4] = {
+		cpu_to_le16(cmd),
+		cpu_to_le16(parm0),
+		0,
+		0,
+	};
+	dbg("0x%04X, parm0 0x%04X", cmd, parm0);
+	ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_DOCMD, EZUSB_RID_ACK);
+	if (!ctx)
+		return -ENOMEM;
+
+	return ezusb_access_ltv(upriv, ctx, sizeof(data), &data,
+				EZUSB_FRAME_CONTROL, NULL, 0, NULL);
+}
+
+static int ezusb_bap_pread(struct hermes *hw, int bap,
+			   void *buf, int len, u16 id, u16 offset)
+{
+	struct ezusb_priv *upriv = hw->priv;
+	struct ezusb_packet *ans = (void *) upriv->read_urb->transfer_buffer;
+	int actual_length = upriv->read_urb->actual_length;
+
+	if (id == EZUSB_RID_RX) {
+		if ((sizeof(*ans) + offset + len) > actual_length) {
+			printk(KERN_ERR PFX "BAP read beyond buffer end "
+			       "in rx frame\n");
+			return -EINVAL;
+		}
+		memcpy(buf, ans->data + offset, len);
+		return 0;
+	}
+
+	if (EZUSB_IS_INFO(id)) {
+		/* Include 4 bytes for length/type */
+		if ((sizeof(*ans) + offset + len - 4) > actual_length) {
+			printk(KERN_ERR PFX "BAP read beyond buffer end "
+			       "in info frame\n");
+			return -EFAULT;
+		}
+		memcpy(buf, ans->data + offset - 4, len);
+	} else {
+		printk(KERN_ERR PFX "Unexpected fid 0x%04x\n", id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ezusb_read_pda(struct hermes *hw, __le16 *pda,
+			  u32 pda_addr, u16 pda_len)
+{
+	struct ezusb_priv *upriv = hw->priv;
+	struct request_context *ctx;
+	__le16 data[] = {
+		cpu_to_le16(pda_addr & 0xffff),
+		cpu_to_le16(pda_len - 4)
+	};
+	ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_READ_PDA, EZUSB_RID_READ_PDA);
+	if (!ctx)
+		return -ENOMEM;
+
+	/* wl_lkm does not include PDA size in the PDA area.
+	 * We will pad the information into pda, so other routines
+	 * don't have to be modified */
+	pda[0] = cpu_to_le16(pda_len - 2);
+	/* Includes CFG_PROD_DATA but not itself */
+	pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */
+
+	return ezusb_access_ltv(upriv, ctx, sizeof(data), &data,
+				EZUSB_FRAME_CONTROL, &pda[2], pda_len - 4,
+				NULL);
+}
+
+static int ezusb_program_init(struct hermes *hw, u32 entry_point)
+{
+	struct ezusb_priv *upriv = hw->priv;
+	struct request_context *ctx;
+	__le32 data = cpu_to_le32(entry_point);
+
+	ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_INIT, EZUSB_RID_ACK);
+	if (!ctx)
+		return -ENOMEM;
+
+	return ezusb_access_ltv(upriv, ctx, sizeof(data), &data,
+				EZUSB_FRAME_CONTROL, NULL, 0, NULL);
+}
+
+static int ezusb_program_end(struct hermes *hw)
+{
+	struct ezusb_priv *upriv = hw->priv;
+	struct request_context *ctx;
+
+	ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_END, EZUSB_RID_ACK);
+	if (!ctx)
+		return -ENOMEM;
+
+	return ezusb_access_ltv(upriv, ctx, 0, NULL,
+				EZUSB_FRAME_CONTROL, NULL, 0, NULL);
+}
+
+static int ezusb_program_bytes(struct hermes *hw, const char *buf,
+			       u32 addr, u32 len)
+{
+	struct ezusb_priv *upriv = hw->priv;
+	struct request_context *ctx;
+	__le32 data = cpu_to_le32(addr);
+	int err;
+
+	ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_SET_ADDR, EZUSB_RID_ACK);
+	if (!ctx)
+		return -ENOMEM;
+
+	err = ezusb_access_ltv(upriv, ctx, sizeof(data), &data,
+			       EZUSB_FRAME_CONTROL, NULL, 0, NULL);
+	if (err)
+		return err;
+
+	ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_BYTES, EZUSB_RID_ACK);
+	if (!ctx)
+		return -ENOMEM;
+
+	return ezusb_access_ltv(upriv, ctx, len, buf,
+				EZUSB_FRAME_CONTROL, NULL, 0, NULL);
+}
+
+static int ezusb_program(struct hermes *hw, const char *buf,
+			 u32 addr, u32 len)
+{
+	u32 ch_addr;
+	u32 ch_len;
+	int err = 0;
+
+	/* We can only send 2048 bytes out of the bulk xmit at a time,
+	 * so we have to split any programming into chunks of <2048
+	 * bytes. */
+
+	ch_len = (len < MAX_DL_SIZE) ? len : MAX_DL_SIZE;
+	ch_addr = addr;
+
+	while (ch_addr < (addr + len)) {
+		pr_debug("Programming subblock of length %d "
+			 "to address 0x%08x. Data @ %p\n",
+			 ch_len, ch_addr, &buf[ch_addr - addr]);
+
+		err = ezusb_program_bytes(hw, &buf[ch_addr - addr],
+					  ch_addr, ch_len);
+		if (err)
+			break;
+
+		ch_addr += ch_len;
+		ch_len = ((addr + len - ch_addr) < MAX_DL_SIZE) ?
+			(addr + len - ch_addr) : MAX_DL_SIZE;
+	}
+
+	return err;
+}
+
+static netdev_tx_t ezusb_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct orinoco_private *priv = ndev_priv(dev);
+	struct net_device_stats *stats = &priv->stats;
+	struct ezusb_priv *upriv = priv->card;
+	u8 mic[MICHAEL_MIC_LEN+1];
+	int err = 0;
+	int tx_control;
+	unsigned long flags;
+	struct request_context *ctx;
+	u8 *buf;
+	int tx_size;
+
+	if (!netif_running(dev)) {
+		printk(KERN_ERR "%s: Tx on stopped device!\n",
+		       dev->name);
+		return NETDEV_TX_BUSY;
+	}
+
+	if (netif_queue_stopped(dev)) {
+		printk(KERN_DEBUG "%s: Tx while transmitter busy!\n",
+		       dev->name);
+		return NETDEV_TX_BUSY;
+	}
+
+	if (orinoco_lock(priv, &flags) != 0) {
+		printk(KERN_ERR
+		       "%s: ezusb_xmit() called while hw_unavailable\n",
+		       dev->name);
+		return NETDEV_TX_BUSY;
+	}
+
+	if (!netif_carrier_ok(dev) ||
+	    (priv->iw_mode == NL80211_IFTYPE_MONITOR)) {
+		/* Oops, the firmware hasn't established a connection,
+		   silently drop the packet (this seems to be the
+		   safest approach). */
+		goto drop;
+	}
+
+	/* Check packet length */
+	if (skb->len < ETH_HLEN)
+		goto drop;
+
+	ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_TX, 0);
+	if (!ctx)
+		goto busy;
+
+	memset(ctx->buf, 0, BULK_BUF_SIZE);
+	buf = ctx->buf->data;
+
+	tx_control = 0;
+
+	err = orinoco_process_xmit_skb(skb, dev, priv, &tx_control,
+				       &mic[0]);
+	if (err)
+		goto drop;
+
+	{
+		__le16 *tx_cntl = (__le16 *)buf;
+		*tx_cntl = cpu_to_le16(tx_control);
+		buf += sizeof(*tx_cntl);
+	}
+
+	memcpy(buf, skb->data, skb->len);
+	buf += skb->len;
+
+	if (tx_control & HERMES_TXCTRL_MIC) {
+		u8 *m = mic;
+		/* Mic has been offset so it can be copied to an even
+		 * address. We're copying eveything anyway, so we
+		 * don't need to copy that first byte. */
+		if (skb->len % 2)
+			m++;
+		memcpy(buf, m, MICHAEL_MIC_LEN);
+		buf += MICHAEL_MIC_LEN;
+	}
+
+	/* Finally, we actually initiate the send */
+	netif_stop_queue(dev);
+
+	/* The card may behave better if we send evenly sized usb transfers */
+	tx_size = ALIGN(buf - ctx->buf->data, 2);
+
+	err = ezusb_access_ltv(upriv, ctx, tx_size, NULL,
+			       EZUSB_FRAME_DATA, NULL, 0, NULL);
+
+	if (err) {
+		netif_start_queue(dev);
+		if (net_ratelimit())
+			printk(KERN_ERR "%s: Error %d transmitting packet\n",
+				dev->name, err);
+		goto busy;
+	}
+
+	dev->trans_start = jiffies;
+	stats->tx_bytes += skb->len;
+	goto ok;
+
+ drop:
+	stats->tx_errors++;
+	stats->tx_dropped++;
+
+ ok:
+	orinoco_unlock(priv, &flags);
+	dev_kfree_skb(skb);
+	return NETDEV_TX_OK;
+
+ busy:
+	orinoco_unlock(priv, &flags);
+	return NETDEV_TX_BUSY;
+}
+
+static int ezusb_allocate(struct hermes *hw, u16 size, u16 *fid)
+{
+	*fid = EZUSB_RID_TX;
+	return 0;
+}
+
+
+static int ezusb_hard_reset(struct orinoco_private *priv)
+{
+	struct ezusb_priv *upriv = priv->card;
+	int retval = ezusb_8051_cpucs(upriv, 1);
+
+	if (retval < 0) {
+		err("Failed to reset");
+		return retval;
+	}
+
+	retval = ezusb_8051_cpucs(upriv, 0);
+	if (retval < 0) {
+		err("Failed to unreset");
+		return retval;
+	}
+
+	dbg("sending control message");
+	retval = usb_control_msg(upriv->udev,
+				 usb_sndctrlpipe(upriv->udev, 0),
+				 EZUSB_REQUEST_TRIGER,
+				 USB_TYPE_VENDOR | USB_RECIP_DEVICE |
+				 USB_DIR_OUT, 0x0, 0x0, NULL, 0,
+				 DEF_TIMEOUT);
+	if (retval < 0) {
+		err("EZUSB_REQUEST_TRIGER failed retval %d", retval);
+		return retval;
+	}
+#if 0
+	dbg("Sending EZUSB_REQUEST_TRIG_AC");
+	retval = usb_control_msg(upriv->udev,
+				 usb_sndctrlpipe(upriv->udev, 0),
+				 EZUSB_REQUEST_TRIG_AC,
+				 USB_TYPE_VENDOR | USB_RECIP_DEVICE |
+				 USB_DIR_OUT, 0x00FA, 0x0, NULL, 0,
+				 DEF_TIMEOUT);
+	if (retval < 0) {
+		err("EZUSB_REQUEST_TRIG_AC failed retval %d", retval);
+		return retval;
+	}
+#endif
+
+	return 0;
+}
+
+
+static int ezusb_init(hermes_t *hw)
+{
+	struct ezusb_priv *upriv = hw->priv;
+	int retval;
+
+	BUG_ON(in_interrupt());
+	BUG_ON(!upriv);
+
+	upriv->reply_count = 0;
+	/* Write the MAGIC number on the simulated registers to keep
+	 * orinoco.c happy */
+	hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC);
+	hermes_write_regn(hw, RXFID, EZUSB_RID_RX);
+
+	usb_kill_urb(upriv->read_urb);
+	ezusb_submit_in_urb(upriv);
+
+	retval = ezusb_write_ltv(hw, 0, EZUSB_RID_INIT1,
+				 HERMES_BYTES_TO_RECLEN(2), "\x10\x00");
+	if (retval < 0) {
+		printk(KERN_ERR PFX "EZUSB_RID_INIT1 error %d\n", retval);
+		return retval;
+	}
+
+	retval = ezusb_docmd_wait(hw, HERMES_CMD_INIT, 0, NULL);
+	if (retval < 0) {
+		printk(KERN_ERR PFX "HERMES_CMD_INIT error %d\n", retval);
+		return retval;
+	}
+
+	return 0;
+}
+
+static void ezusb_bulk_in_callback(struct urb *urb)
+{
+	struct ezusb_priv *upriv = (struct ezusb_priv *) urb->context;
+	struct ezusb_packet *ans = urb->transfer_buffer;
+	u16 crc;
+	u16 hermes_rid;
+
+	if (upriv->udev == NULL) {
+		dbg("disconnected");
+		return;
+	}
+
+	if (urb->status == -ETIMEDOUT) {
+		/* When a device gets unplugged we get this every time
+		 * we resubmit, flooding the logs.  Since we don't use
+		 * USB timeouts, it shouldn't happen any other time*/
+		pr_warning("%s: urb timed out, not resubmiting", __func__);
+		return;
+	}
+	if (urb->status == -ECONNABORTED) {
+		pr_warning("%s: connection abort, resubmiting urb",
+		     __func__);
+		goto resubmit;
+	}
+	if ((urb->status == -EILSEQ)
+	    || (urb->status == -ENOENT)
+	    || (urb->status == -ECONNRESET)) {
+		dbg("status %d, not resubmiting", urb->status);
+		return;
+	}
+	if (urb->status)
+		dbg("status: %d length: %d",
+		    urb->status, urb->actual_length);
+	if (urb->actual_length < sizeof(*ans)) {
+		err("%s: short read, ignoring", __func__);
+		goto resubmit;
+	}
+	crc = build_crc(ans);
+	if (le16_to_cpu(ans->crc) != crc) {
+		err("CRC error, ignoring packet");
+		goto resubmit;
+	}
+
+	hermes_rid = le16_to_cpu(ans->hermes_rid);
+	if ((hermes_rid != EZUSB_RID_RX) && !EZUSB_IS_INFO(hermes_rid)) {
+		ezusb_request_in_callback(upriv, urb);
+	} else if (upriv->dev) {
+		struct net_device *dev = upriv->dev;
+		struct orinoco_private *priv = ndev_priv(dev);
+		hermes_t *hw = &priv->hw;
+
+		if (hermes_rid == EZUSB_RID_RX) {
+			__orinoco_ev_rx(dev, hw);
+		} else {
+			hermes_write_regn(hw, INFOFID,
+					  le16_to_cpu(ans->hermes_rid));
+			__orinoco_ev_info(dev, hw);
+		}
+	}
+
+ resubmit:
+	if (upriv->udev)
+		ezusb_submit_in_urb(upriv);
+}
+
+static inline void ezusb_delete(struct ezusb_priv *upriv)
+{
+	struct net_device *dev;
+	struct list_head *item;
+	struct list_head *tmp_item;
+	unsigned long flags;
+
+	BUG_ON(in_interrupt());
+	BUG_ON(!upriv);
+
+	dev = upriv->dev;
+	mutex_lock(&upriv->mtx);
+
+	upriv->udev = NULL;	/* No timer will be rearmed from here */
+
+	usb_kill_urb(upriv->read_urb);
+
+	spin_lock_irqsave(&upriv->req_lock, flags);
+	list_for_each_safe(item, tmp_item, &upriv->req_active) {
+		struct request_context *ctx;
+		int err;
+
+		ctx = list_entry(item, struct request_context, list);
+		atomic_inc(&ctx->refcount);
+
+		ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK;
+		err = usb_unlink_urb(ctx->outurb);
+
+		spin_unlock_irqrestore(&upriv->req_lock, flags);
+		if (err == -EINPROGRESS)
+			wait_for_completion(&ctx->done);
+
+		del_timer_sync(&ctx->timer);
+		/* FIXME: there is an slight chance for the irq handler to
+		 * be running */
+		if (!list_empty(&ctx->list))
+			ezusb_ctx_complete(ctx);
+
+		ezusb_request_context_put(ctx);
+		spin_lock_irqsave(&upriv->req_lock, flags);
+	}
+	spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+	list_for_each_safe(item, tmp_item, &upriv->req_pending)
+	    ezusb_ctx_complete(list_entry(item,
+					  struct request_context, list));
+
+	if (upriv->read_urb->status == -EINPROGRESS)
+		printk(KERN_ERR PFX "Some URB in progress\n");
+
+	mutex_unlock(&upriv->mtx);
+
+	kfree(upriv->read_urb->transfer_buffer);
+	if (upriv->bap_buf != NULL)
+		kfree(upriv->bap_buf);
+	if (upriv->read_urb != NULL)
+		usb_free_urb(upriv->read_urb);
+	if (upriv->dev) {
+		struct orinoco_private *priv = ndev_priv(upriv->dev);
+		orinoco_if_del(priv);
+		free_orinocodev(priv);
+	}
+}
+
+static void ezusb_lock_irqsave(spinlock_t *lock,
+			       unsigned long *flags) __acquires(lock)
+{
+	spin_lock_bh(lock);
+}
+
+static void ezusb_unlock_irqrestore(spinlock_t *lock,
+				    unsigned long *flags) __releases(lock)
+{
+	spin_unlock_bh(lock);
+}
+
+static void ezusb_lock_irq(spinlock_t *lock) __acquires(lock)
+{
+	spin_lock_bh(lock);
+}
+
+static void ezusb_unlock_irq(spinlock_t *lock) __releases(lock)
+{
+	spin_unlock_bh(lock);
+}
+
+static const struct hermes_ops ezusb_ops = {
+	.init = ezusb_init,
+	.cmd_wait = ezusb_docmd_wait,
+	.init_cmd_wait = ezusb_doicmd_wait,
+	.allocate = ezusb_allocate,
+	.read_ltv = ezusb_read_ltv,
+	.write_ltv = ezusb_write_ltv,
+	.bap_pread = ezusb_bap_pread,
+	.read_pda = ezusb_read_pda,
+	.program_init = ezusb_program_init,
+	.program_end = ezusb_program_end,
+	.program = ezusb_program,
+	.lock_irqsave = ezusb_lock_irqsave,
+	.unlock_irqrestore = ezusb_unlock_irqrestore,
+	.lock_irq = ezusb_lock_irq,
+	.unlock_irq = ezusb_unlock_irq,
+};
+
+static const struct net_device_ops ezusb_netdev_ops = {
+	.ndo_open		= orinoco_open,
+	.ndo_stop		= orinoco_stop,
+	.ndo_start_xmit		= ezusb_xmit,
+	.ndo_set_multicast_list	= orinoco_set_multicast_list,
+	.ndo_change_mtu		= orinoco_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_tx_timeout		= orinoco_tx_timeout,
+	.ndo_get_stats		= orinoco_get_stats,
+};
+
+static int ezusb_probe(struct usb_interface *interface,
+		       const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(interface);
+	struct orinoco_private *priv;
+	hermes_t *hw;
+	struct ezusb_priv *upriv = NULL;
+	struct usb_interface_descriptor *iface_desc;
+	struct usb_endpoint_descriptor *ep;
+	const struct firmware *fw_entry;
+	int retval = 0;
+	int i;
+
+	priv = alloc_orinocodev(sizeof(*upriv), &udev->dev,
+				ezusb_hard_reset, NULL);
+	if (!priv) {
+		err("Couldn't allocate orinocodev");
+		goto exit;
+	}
+
+	hw = &priv->hw;
+
+	upriv = priv->card;
+
+	mutex_init(&upriv->mtx);
+	spin_lock_init(&upriv->reply_count_lock);
+
+	spin_lock_init(&upriv->req_lock);
+	INIT_LIST_HEAD(&upriv->req_pending);
+	INIT_LIST_HEAD(&upriv->req_active);
+
+	upriv->udev = udev;
+
+	hw->iobase = (void __force __iomem *) &upriv->hermes_reg_fake;
+	hw->reg_spacing = HERMES_16BIT_REGSPACING;
+	hw->priv = upriv;
+	hw->ops = &ezusb_ops;
+
+	/* set up the endpoint information */
+	/* check out the endpoints */
+
+	iface_desc = &interface->altsetting[0].desc;
+	for (i = 0; i < iface_desc->bNumEndpoints; ++i) {
+		ep = &interface->altsetting[0].endpoint[i].desc;
+
+		if (((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+		     == USB_DIR_IN) &&
+		    ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+		     == USB_ENDPOINT_XFER_BULK)) {
+			/* we found a bulk in endpoint */
+			if (upriv->read_urb != NULL) {
+				pr_warning("Found a second bulk in ep, ignored");
+				continue;
+			}
+
+			upriv->read_urb = usb_alloc_urb(0, GFP_KERNEL);
+			if (!upriv->read_urb) {
+				err("No free urbs available");
+				goto error;
+			}
+			if (le16_to_cpu(ep->wMaxPacketSize) != 64)
+				pr_warning("bulk in: wMaxPacketSize!= 64");
+			if (ep->bEndpointAddress != (2 | USB_DIR_IN))
+				pr_warning("bulk in: bEndpointAddress: %d",
+				     ep->bEndpointAddress);
+			upriv->read_pipe = usb_rcvbulkpipe(udev,
+							 ep->
+							 bEndpointAddress);
+			upriv->read_urb->transfer_buffer =
+			    kmalloc(BULK_BUF_SIZE, GFP_KERNEL);
+			if (!upriv->read_urb->transfer_buffer) {
+				err("Couldn't allocate IN buffer");
+				goto error;
+			}
+		}
+
+		if (((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+		     == USB_DIR_OUT) &&
+		    ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+		     == USB_ENDPOINT_XFER_BULK)) {
+			/* we found a bulk out endpoint */
+			if (upriv->bap_buf != NULL) {
+				pr_warning("Found a second bulk out ep, ignored");
+				continue;
+			}
+
+			if (le16_to_cpu(ep->wMaxPacketSize) != 64)
+				pr_warning("bulk out: wMaxPacketSize != 64");
+			if (ep->bEndpointAddress != 2)
+				pr_warning("bulk out: bEndpointAddress: %d",
+				     ep->bEndpointAddress);
+			upriv->write_pipe = usb_sndbulkpipe(udev,
+							  ep->
+							  bEndpointAddress);
+			upriv->bap_buf = kmalloc(BULK_BUF_SIZE, GFP_KERNEL);
+			if (!upriv->bap_buf) {
+				err("Couldn't allocate bulk_out_buffer");
+				goto error;
+			}
+		}
+	}
+	if (!upriv->bap_buf || !upriv->read_urb) {
+		err("Didn't find the required bulk endpoints");
+		goto error;
+	}
+
+	if (request_firmware(&fw_entry, "orinoco_ezusb_fw",
+			     &interface->dev) == 0) {
+		firmware.size = fw_entry->size;
+		firmware.code = fw_entry->data;
+	}
+	if (firmware.size && firmware.code) {
+		ezusb_firmware_download(upriv, &firmware);
+	} else {
+		err("No firmware to download");
+		goto error;
+	}
+
+	if (ezusb_hard_reset(priv) < 0) {
+		err("Cannot reset the device");
+		goto error;
+	}
+
+	/* If the firmware is already downloaded orinoco.c will call
+	 * ezusb_init but if the firmware is not already there, that will make
+	 * the kernel very unstable, so we try initializing here and quit in
+	 * case of error */
+	if (ezusb_init(hw) < 0) {
+		err("Couldn't initialize the device");
+		err("Firmware may not be downloaded or may be wrong.");
+		goto error;
+	}
+
+	/* Initialise the main driver */
+	if (orinoco_init(priv) != 0) {
+		err("orinoco_init() failed\n");
+		goto error;
+	}
+
+	if (orinoco_if_add(priv, 0, 0, &ezusb_netdev_ops) != 0) {
+		upriv->dev = NULL;
+		err("%s: orinoco_if_add() failed", __func__);
+		goto error;
+	}
+	upriv->dev = priv->ndev;
+
+	goto exit;
+
+ error:
+	ezusb_delete(upriv);
+	if (upriv->dev) {
+		/* upriv->dev was 0, so ezusb_delete() didn't free it */
+		free_orinocodev(priv);
+	}
+	upriv = NULL;
+	retval = -EFAULT;
+ exit:
+	if (fw_entry) {
+		firmware.code = NULL;
+		firmware.size = 0;
+		release_firmware(fw_entry);
+	}
+	usb_set_intfdata(interface, upriv);
+	return retval;
+}
+
+
+static void ezusb_disconnect(struct usb_interface *intf)
+{
+	struct ezusb_priv *upriv = usb_get_intfdata(intf);
+	usb_set_intfdata(intf, NULL);
+	ezusb_delete(upriv);
+	printk(KERN_INFO PFX "Disconnected\n");
+}
+
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver orinoco_driver = {
+	.name = DRIVER_NAME,
+	.probe = ezusb_probe,
+	.disconnect = ezusb_disconnect,
+	.id_table = ezusb_table,
+};
+
+/* Can't be declared "const" or the whole __initdata section will
+ * become const */
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+    " (Manuel Estrada Sainz)";
+
+static int __init ezusb_module_init(void)
+{
+	int err;
+
+	printk(KERN_DEBUG "%s\n", version);
+
+	/* register this driver with the USB subsystem */
+	err = usb_register(&orinoco_driver);
+	if (err < 0) {
+		printk(KERN_ERR PFX "usb_register failed, error %d\n",
+		       err);
+		return err;
+	}
+
+	return 0;
+}
+
+static void __exit ezusb_module_exit(void)
+{
+	/* deregister this driver with the USB subsystem */
+	usb_deregister(&orinoco_driver);
+}
+
+
+module_init(ezusb_module_init);
+module_exit(ezusb_module_exit);
+
+MODULE_AUTHOR("Manuel Estrada Sainz");
+MODULE_DESCRIPTION
+    ("Driver for Orinoco wireless LAN cards using EZUSB bridge");
+MODULE_LICENSE("Dual MPL/GPL");
diff --git a/drivers/net/wireless/orinoco/scan.c b/drivers/net/wireless/orinoco/scan.c
index 330d42d4533..4300d9db7d8 100644
--- a/drivers/net/wireless/orinoco/scan.c
+++ b/drivers/net/wireless/orinoco/scan.c
@@ -127,7 +127,7 @@ void orinoco_add_extscan_result(struct orinoco_private *priv,
 {
 	struct wiphy *wiphy = priv_to_wiphy(priv);
 	struct ieee80211_channel *channel;
-	u8 *ie;
+	const u8 *ie;
 	u64 timestamp;
 	s32 signal;
 	u16 capability;
@@ -136,7 +136,7 @@ void orinoco_add_extscan_result(struct orinoco_private *priv,
 	int chan, freq;
 
 	ie_len = len - sizeof(*bss);
-	ie = orinoco_get_ie(bss->data, ie_len, WLAN_EID_DS_PARAMS);
+	ie = cfg80211_find_ie(WLAN_EID_DS_PARAMS, bss->data, ie_len);
 	chan = ie ? ie[2] : 0;
 	freq = ieee80211_dsss_chan_to_freq(chan);
 	channel = ieee80211_get_channel(wiphy, freq);
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index 59bda240fdc..b51a9adc80f 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -57,7 +57,6 @@ MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket
  * struct orinoco_private */
 struct orinoco_pccard {
 	struct pcmcia_device	*p_dev;
-	dev_node_t node;
 };
 
 /********************************************************************/
@@ -193,10 +192,6 @@ spectrum_cs_probe(struct pcmcia_device *link)
 	card->p_dev = link;
 	link->priv = priv;
 
-	/* Interrupt setup */
-	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	link->irq.Handler = orinoco_interrupt;
-
 	/* General socket configuration defaults can go here.  In this
 	 * client, we assume very little, and rely on the CIS for
 	 * almost everything.  In most clients, many details (i.e.,
@@ -218,8 +213,7 @@ static void spectrum_cs_detach(struct pcmcia_device *link)
 {
 	struct orinoco_private *priv = link->priv;
 
-	if (link->dev_node)
-		orinoco_if_del(priv);
+	orinoco_if_del(priv);
 
 	spectrum_cs_release(link);
 
@@ -304,7 +298,6 @@ static int
 spectrum_cs_config(struct pcmcia_device *link)
 {
 	struct orinoco_private *priv = link->priv;
-	struct orinoco_pccard *card = priv->card;
 	hermes_t *hw = &priv->hw;
 	int ret;
 	void __iomem *mem;
@@ -332,12 +325,7 @@ spectrum_cs_config(struct pcmcia_device *link)
 		goto failed;
 	}
 
-	/*
-	 * Allocate an interrupt line.  Note that this does not assign
-	 * a handler to the interrupt, unless the 'Handler' member of
-	 * the irq structure is initialized.
-	 */
-	ret = pcmcia_request_irq(link, &link->irq);
+	ret = pcmcia_request_irq(link, orinoco_interrupt);
 	if (ret)
 		goto failed;
 
@@ -349,6 +337,7 @@ spectrum_cs_config(struct pcmcia_device *link)
 		goto failed;
 
 	hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
+	hw->eeprom_pda = true;
 
 	/*
 	 * This actually configures the PCMCIA socket -- setting up
@@ -359,9 +348,6 @@ spectrum_cs_config(struct pcmcia_device *link)
 	if (ret)
 		goto failed;
 
-	/* Ok, we have the configuration, prepare to register the netdev */
-	card->node.major = card->node.minor = 0;
-
 	/* Reset card */
 	if (spectrum_cs_hard_reset(priv) != 0)
 		goto failed;
@@ -374,17 +360,11 @@ spectrum_cs_config(struct pcmcia_device *link)
 
 	/* Register an interface with the stack */
 	if (orinoco_if_add(priv, link->io.BasePort1,
-			   link->irq.AssignedIRQ) != 0) {
+			   link->irq, NULL) != 0) {
 		printk(KERN_ERR PFX "orinoco_if_add() failed\n");
 		goto failed;
 	}
 
-	/* At this point, the dev_node_t structure(s) needs to be
-	 * initialized and arranged in a linked list at link->dev_node. */
-	strcpy(card->node.dev_name, priv->ndev->name);
-	link->dev_node = &card->node; /* link->dev_node being non-NULL is also
-				       * used to indicate that the
-				       * net_device has been registered */
 	return 0;
 
  failed:
@@ -405,9 +385,9 @@ spectrum_cs_release(struct pcmcia_device *link)
 
 	/* We're committed to taking the device away now, so mark the
 	 * hardware as unavailable */
-	spin_lock_irqsave(&priv->lock, flags);
+	priv->hw.ops->lock_irqsave(&priv->lock, &flags);
 	priv->hw_unavailable++;
-	spin_unlock_irqrestore(&priv->lock, flags);
+	priv->hw.ops->unlock_irqrestore(&priv->lock, &flags);
 
 	pcmcia_disable_device(link);
 	if (priv->hw.iobase)
diff --git a/drivers/net/wireless/orinoco/wext.c b/drivers/net/wireless/orinoco/wext.c
index fbcc6e1a2e1..5775124e2ae 100644
--- a/drivers/net/wireless/orinoco/wext.c
+++ b/drivers/net/wireless/orinoco/wext.c
@@ -458,7 +458,7 @@ static int orinoco_ioctl_setfreq(struct net_device *dev,
 	if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
 		/* Fast channel change - no commit if successful */
 		hermes_t *hw = &priv->hw;
-		err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
+		err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST |
 					    HERMES_TEST_SET_CHANNEL,
 					chan, NULL);
 	}
@@ -538,125 +538,6 @@ static int orinoco_ioctl_setsens(struct net_device *dev,
 	return -EINPROGRESS;		/* Call commit handler */
 }
 
-static int orinoco_ioctl_setrts(struct net_device *dev,
-				struct iw_request_info *info,
-				struct iw_param *rrq,
-				char *extra)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	int val = rrq->value;
-	unsigned long flags;
-
-	if (rrq->disabled)
-		val = 2347;
-
-	if ((val < 0) || (val > 2347))
-		return -EINVAL;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	priv->rts_thresh = val;
-	orinoco_unlock(priv, &flags);
-
-	return -EINPROGRESS;		/* Call commit handler */
-}
-
-static int orinoco_ioctl_getrts(struct net_device *dev,
-				struct iw_request_info *info,
-				struct iw_param *rrq,
-				char *extra)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-
-	rrq->value = priv->rts_thresh;
-	rrq->disabled = (rrq->value == 2347);
-	rrq->fixed = 1;
-
-	return 0;
-}
-
-static int orinoco_ioctl_setfrag(struct net_device *dev,
-				 struct iw_request_info *info,
-				 struct iw_param *frq,
-				 char *extra)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	int err = -EINPROGRESS;		/* Call commit handler */
-	unsigned long flags;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	if (priv->has_mwo) {
-		if (frq->disabled)
-			priv->mwo_robust = 0;
-		else {
-			if (frq->fixed)
-				printk(KERN_WARNING "%s: Fixed fragmentation "
-				       "is not supported on this firmware. "
-				       "Using MWO robust instead.\n",
-				       dev->name);
-			priv->mwo_robust = 1;
-		}
-	} else {
-		if (frq->disabled)
-			priv->frag_thresh = 2346;
-		else {
-			if ((frq->value < 256) || (frq->value > 2346))
-				err = -EINVAL;
-			else
-				/* must be even */
-				priv->frag_thresh = frq->value & ~0x1;
-		}
-	}
-
-	orinoco_unlock(priv, &flags);
-
-	return err;
-}
-
-static int orinoco_ioctl_getfrag(struct net_device *dev,
-				 struct iw_request_info *info,
-				 struct iw_param *frq,
-				 char *extra)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	hermes_t *hw = &priv->hw;
-	int err;
-	u16 val;
-	unsigned long flags;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	if (priv->has_mwo) {
-		err = hermes_read_wordrec(hw, USER_BAP,
-					  HERMES_RID_CNFMWOROBUST_AGERE,
-					  &val);
-		if (err)
-			val = 0;
-
-		frq->value = val ? 2347 : 0;
-		frq->disabled = !val;
-		frq->fixed = 0;
-	} else {
-		err = hermes_read_wordrec(hw, USER_BAP,
-					  HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
-					  &val);
-		if (err)
-			val = 0;
-
-		frq->value = val;
-		frq->disabled = (val >= 2346);
-		frq->fixed = 1;
-	}
-
-	orinoco_unlock(priv, &flags);
-
-	return err;
-}
-
 static int orinoco_ioctl_setrate(struct net_device *dev,
 				 struct iw_request_info *info,
 				 struct iw_param *rrq,
@@ -1201,60 +1082,6 @@ static int orinoco_ioctl_set_mlme(struct net_device *dev,
 	return ret;
 }
 
-static int orinoco_ioctl_getretry(struct net_device *dev,
-				  struct iw_request_info *info,
-				  struct iw_param *rrq,
-				  char *extra)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-	hermes_t *hw = &priv->hw;
-	int err = 0;
-	u16 short_limit, long_limit, lifetime;
-	unsigned long flags;
-
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
-	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT,
-				  &short_limit);
-	if (err)
-		goto out;
-
-	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT,
-				  &long_limit);
-	if (err)
-		goto out;
-
-	err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME,
-				  &lifetime);
-	if (err)
-		goto out;
-
-	rrq->disabled = 0;		/* Can't be disabled */
-
-	/* Note : by default, display the retry number */
-	if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) {
-		rrq->flags = IW_RETRY_LIFETIME;
-		rrq->value = lifetime * 1000;	/* ??? */
-	} else {
-		/* By default, display the min number */
-		if ((rrq->flags & IW_RETRY_LONG)) {
-			rrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG;
-			rrq->value = long_limit;
-		} else {
-			rrq->flags = IW_RETRY_LIMIT;
-			rrq->value = short_limit;
-			if (short_limit != long_limit)
-				rrq->flags |= IW_RETRY_SHORT;
-		}
-	}
-
- out:
-	orinoco_unlock(priv, &flags);
-
-	return err;
-}
-
 static int orinoco_ioctl_reset(struct net_device *dev,
 			       struct iw_request_info *info,
 			       void *wrqu,
@@ -1446,8 +1273,8 @@ static int orinoco_ioctl_getrid(struct net_device *dev,
 	if (orinoco_lock(priv, &flags) != 0)
 		return -EBUSY;
 
-	err = hermes_read_ltv(hw, USER_BAP, rid, MAX_RID_LEN, &length,
-			      extra);
+	err = hw->ops->read_ltv(hw, USER_BAP, rid, MAX_RID_LEN, &length,
+				extra);
 	if (err)
 		goto out;
 
@@ -1506,46 +1333,44 @@ static const struct iw_priv_args orinoco_privtab[] = {
  * Structures to export the Wireless Handlers
  */
 
-#define STD_IW_HANDLER(id, func) \
-	[IW_IOCTL_IDX(id)] = (iw_handler) func
 static const iw_handler	orinoco_handler[] = {
-	STD_IW_HANDLER(SIOCSIWCOMMIT,	orinoco_ioctl_commit),
-	STD_IW_HANDLER(SIOCGIWNAME,	cfg80211_wext_giwname),
-	STD_IW_HANDLER(SIOCSIWFREQ,	orinoco_ioctl_setfreq),
-	STD_IW_HANDLER(SIOCGIWFREQ,	orinoco_ioctl_getfreq),
-	STD_IW_HANDLER(SIOCSIWMODE,	cfg80211_wext_siwmode),
-	STD_IW_HANDLER(SIOCGIWMODE,	cfg80211_wext_giwmode),
-	STD_IW_HANDLER(SIOCSIWSENS,	orinoco_ioctl_setsens),
-	STD_IW_HANDLER(SIOCGIWSENS,	orinoco_ioctl_getsens),
-	STD_IW_HANDLER(SIOCGIWRANGE,	cfg80211_wext_giwrange),
-	STD_IW_HANDLER(SIOCSIWSPY,	iw_handler_set_spy),
-	STD_IW_HANDLER(SIOCGIWSPY,	iw_handler_get_spy),
-	STD_IW_HANDLER(SIOCSIWTHRSPY,	iw_handler_set_thrspy),
-	STD_IW_HANDLER(SIOCGIWTHRSPY,	iw_handler_get_thrspy),
-	STD_IW_HANDLER(SIOCSIWAP,	orinoco_ioctl_setwap),
-	STD_IW_HANDLER(SIOCGIWAP,	orinoco_ioctl_getwap),
-	STD_IW_HANDLER(SIOCSIWSCAN,	cfg80211_wext_siwscan),
-	STD_IW_HANDLER(SIOCGIWSCAN,	cfg80211_wext_giwscan),
-	STD_IW_HANDLER(SIOCSIWESSID,	orinoco_ioctl_setessid),
-	STD_IW_HANDLER(SIOCGIWESSID,	orinoco_ioctl_getessid),
-	STD_IW_HANDLER(SIOCSIWRATE,	orinoco_ioctl_setrate),
-	STD_IW_HANDLER(SIOCGIWRATE,	orinoco_ioctl_getrate),
-	STD_IW_HANDLER(SIOCSIWRTS,	orinoco_ioctl_setrts),
-	STD_IW_HANDLER(SIOCGIWRTS,	orinoco_ioctl_getrts),
-	STD_IW_HANDLER(SIOCSIWFRAG,	orinoco_ioctl_setfrag),
-	STD_IW_HANDLER(SIOCGIWFRAG,	orinoco_ioctl_getfrag),
-	STD_IW_HANDLER(SIOCGIWRETRY,	orinoco_ioctl_getretry),
-	STD_IW_HANDLER(SIOCSIWENCODE,	orinoco_ioctl_setiwencode),
-	STD_IW_HANDLER(SIOCGIWENCODE,	orinoco_ioctl_getiwencode),
-	STD_IW_HANDLER(SIOCSIWPOWER,	orinoco_ioctl_setpower),
-	STD_IW_HANDLER(SIOCGIWPOWER,	orinoco_ioctl_getpower),
-	STD_IW_HANDLER(SIOCSIWGENIE,	orinoco_ioctl_set_genie),
-	STD_IW_HANDLER(SIOCGIWGENIE,	orinoco_ioctl_get_genie),
-	STD_IW_HANDLER(SIOCSIWMLME,	orinoco_ioctl_set_mlme),
-	STD_IW_HANDLER(SIOCSIWAUTH,	orinoco_ioctl_set_auth),
-	STD_IW_HANDLER(SIOCGIWAUTH,	orinoco_ioctl_get_auth),
-	STD_IW_HANDLER(SIOCSIWENCODEEXT, orinoco_ioctl_set_encodeext),
-	STD_IW_HANDLER(SIOCGIWENCODEEXT, orinoco_ioctl_get_encodeext),
+	IW_HANDLER(SIOCSIWCOMMIT,	(iw_handler)orinoco_ioctl_commit),
+	IW_HANDLER(SIOCGIWNAME,		(iw_handler)cfg80211_wext_giwname),
+	IW_HANDLER(SIOCSIWFREQ,		(iw_handler)orinoco_ioctl_setfreq),
+	IW_HANDLER(SIOCGIWFREQ,		(iw_handler)orinoco_ioctl_getfreq),
+	IW_HANDLER(SIOCSIWMODE,		(iw_handler)cfg80211_wext_siwmode),
+	IW_HANDLER(SIOCGIWMODE,		(iw_handler)cfg80211_wext_giwmode),
+	IW_HANDLER(SIOCSIWSENS,		(iw_handler)orinoco_ioctl_setsens),
+	IW_HANDLER(SIOCGIWSENS,		(iw_handler)orinoco_ioctl_getsens),
+	IW_HANDLER(SIOCGIWRANGE,	(iw_handler)cfg80211_wext_giwrange),
+	IW_HANDLER(SIOCSIWSPY,		iw_handler_set_spy),
+	IW_HANDLER(SIOCGIWSPY,		iw_handler_get_spy),
+	IW_HANDLER(SIOCSIWTHRSPY,	iw_handler_set_thrspy),
+	IW_HANDLER(SIOCGIWTHRSPY,	iw_handler_get_thrspy),
+	IW_HANDLER(SIOCSIWAP,		(iw_handler)orinoco_ioctl_setwap),
+	IW_HANDLER(SIOCGIWAP,		(iw_handler)orinoco_ioctl_getwap),
+	IW_HANDLER(SIOCSIWSCAN,		(iw_handler)cfg80211_wext_siwscan),
+	IW_HANDLER(SIOCGIWSCAN,		(iw_handler)cfg80211_wext_giwscan),
+	IW_HANDLER(SIOCSIWESSID,	(iw_handler)orinoco_ioctl_setessid),
+	IW_HANDLER(SIOCGIWESSID,	(iw_handler)orinoco_ioctl_getessid),
+	IW_HANDLER(SIOCSIWRATE,		(iw_handler)orinoco_ioctl_setrate),
+	IW_HANDLER(SIOCGIWRATE,		(iw_handler)orinoco_ioctl_getrate),
+	IW_HANDLER(SIOCSIWRTS,		(iw_handler)cfg80211_wext_siwrts),
+	IW_HANDLER(SIOCGIWRTS,		(iw_handler)cfg80211_wext_giwrts),
+	IW_HANDLER(SIOCSIWFRAG,		(iw_handler)cfg80211_wext_siwfrag),
+	IW_HANDLER(SIOCGIWFRAG,		(iw_handler)cfg80211_wext_giwfrag),
+	IW_HANDLER(SIOCGIWRETRY,	(iw_handler)cfg80211_wext_giwretry),
+	IW_HANDLER(SIOCSIWENCODE,	(iw_handler)orinoco_ioctl_setiwencode),
+	IW_HANDLER(SIOCGIWENCODE,	(iw_handler)orinoco_ioctl_getiwencode),
+	IW_HANDLER(SIOCSIWPOWER,	(iw_handler)orinoco_ioctl_setpower),
+	IW_HANDLER(SIOCGIWPOWER,	(iw_handler)orinoco_ioctl_getpower),
+	IW_HANDLER(SIOCSIWGENIE,	orinoco_ioctl_set_genie),
+	IW_HANDLER(SIOCGIWGENIE,	orinoco_ioctl_get_genie),
+	IW_HANDLER(SIOCSIWMLME,		orinoco_ioctl_set_mlme),
+	IW_HANDLER(SIOCSIWAUTH,		orinoco_ioctl_set_auth),
+	IW_HANDLER(SIOCGIWAUTH,		orinoco_ioctl_get_auth),
+	IW_HANDLER(SIOCSIWENCODEEXT,	orinoco_ioctl_set_encodeext),
+	IW_HANDLER(SIOCGIWENCODEEXT,	orinoco_ioctl_get_encodeext),
 };
 
 
@@ -1553,15 +1378,15 @@ static const iw_handler	orinoco_handler[] = {
   Added typecasting since we no longer use iwreq_data -- Moustafa
  */
 static const iw_handler	orinoco_private_handler[] = {
-	[0] = (iw_handler) orinoco_ioctl_reset,
-	[1] = (iw_handler) orinoco_ioctl_reset,
-	[2] = (iw_handler) orinoco_ioctl_setport3,
-	[3] = (iw_handler) orinoco_ioctl_getport3,
-	[4] = (iw_handler) orinoco_ioctl_setpreamble,
-	[5] = (iw_handler) orinoco_ioctl_getpreamble,
-	[6] = (iw_handler) orinoco_ioctl_setibssport,
-	[7] = (iw_handler) orinoco_ioctl_getibssport,
-	[9] = (iw_handler) orinoco_ioctl_getrid,
+	[0] = (iw_handler)orinoco_ioctl_reset,
+	[1] = (iw_handler)orinoco_ioctl_reset,
+	[2] = (iw_handler)orinoco_ioctl_setport3,
+	[3] = (iw_handler)orinoco_ioctl_getport3,
+	[4] = (iw_handler)orinoco_ioctl_setpreamble,
+	[5] = (iw_handler)orinoco_ioctl_getpreamble,
+	[6] = (iw_handler)orinoco_ioctl_setibssport,
+	[7] = (iw_handler)orinoco_ioctl_getibssport,
+	[9] = (iw_handler)orinoco_ioctl_getrid,
 };
 
 const struct iw_handler_def orinoco_handler_def = {