Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (74 commits)
  Revert "b43: Enforce DMA descriptor memory constraints"
  iwmc3200wifi: fix array out-of-boundary access
  wl1251: timeout one too soon in wl1251_boot_run_firmware()
  mac80211: fix propagation of failed hardware reconfigurations
  mac80211: fix race with suspend and dynamic_ps_disable_work
  ath9k: fix missed error codes in the tx status check
  ath9k: wake hardware during AMPDU TX actions
  ath9k: wake hardware for interface IBSS/AP/Mesh removal
  ath9k: fix suspend by waking device prior to stop
  cfg80211: fix error path in cfg80211_wext_siwscan
  wl1271_cmd.c: cleanup char => u8
  iwlwifi: Storage class should be before const qualifier
  ath9k: Storage class should be before const qualifier
  cfg80211: fix race between deauth and assoc response
  wireless: remove remaining qual code
  rt2x00: Add USB ID for Linksys WUSB 600N rev 2.
  ath5k: fix SWI calibration interrupt storm
  mac80211: fix ibss join with fixed-bssid
  libertas: Remove carrier signaling from the scan code
  orinoco: fix GFP_KERNEL in orinoco_set_key with interrupts disabled
  ...

1 files changed, 14 insertions, 54 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 2a28a1f8b1f..f8e4e4b18d0 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -548,6 +548,9 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	txq = &priv->txq[txq_id];
 	q = &txq->q;
 
+	if ((iwl_queue_space(q) < q->high_mark))
+		goto drop;
+
 	spin_lock_irqsave(&priv->lock, flags);
 
 	idx = get_cmd_index(q, q->write_ptr, 0);
@@ -812,7 +815,7 @@ static int iwl3945_get_measurement(struct iwl_priv *priv,
 		break;
 	}
 
-	free_pages(cmd.reply_page, priv->hw_params.rx_page_order);
+	iwl_free_pages(priv, cmd.reply_page);
 
 	return rc;
 }
@@ -1198,9 +1201,7 @@ void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
 			pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
 				PAGE_SIZE << priv->hw_params.rx_page_order,
 				PCI_DMA_FROMDEVICE);
-			priv->alloc_rxb_page--;
-			__free_pages(rxq->pool[i].page,
-				     priv->hw_params.rx_page_order);
+			__iwl_free_pages(priv, rxq->pool[i].page);
 			rxq->pool[i].page = NULL;
 		}
 		list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
@@ -1247,10 +1248,8 @@ static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rx
 			pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
 				PAGE_SIZE << priv->hw_params.rx_page_order,
 				PCI_DMA_FROMDEVICE);
-			__free_pages(rxq->pool[i].page,
-				     priv->hw_params.rx_page_order);
+			__iwl_free_pages(priv, rxq->pool[i].page);
 			rxq->pool[i].page = NULL;
-			priv->alloc_rxb_page--;
 		}
 	}
 
@@ -1300,47 +1299,6 @@ int iwl3945_calc_db_from_ratio(int sig_ratio)
 	return (int)ratio2dB[sig_ratio];
 }
 
-#define PERFECT_RSSI (-20) /* dBm */
-#define WORST_RSSI (-95)   /* dBm */
-#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
-
-/* Calculate an indication of rx signal quality (a percentage, not dBm!).
- * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
- *   about formulas used below. */
-int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm)
-{
-	int sig_qual;
-	int degradation = PERFECT_RSSI - rssi_dbm;
-
-	/* If we get a noise measurement, use signal-to-noise ratio (SNR)
-	 * as indicator; formula is (signal dbm - noise dbm).
-	 * SNR at or above 40 is a great signal (100%).
-	 * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
-	 * Weakest usable signal is usually 10 - 15 dB SNR. */
-	if (noise_dbm) {
-		if (rssi_dbm - noise_dbm >= 40)
-			return 100;
-		else if (rssi_dbm < noise_dbm)
-			return 0;
-		sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2;
-
-	/* Else use just the signal level.
-	 * This formula is a least squares fit of data points collected and
-	 *   compared with a reference system that had a percentage (%) display
-	 *   for signal quality. */
-	} else
-		sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation *
-			    (15 * RSSI_RANGE + 62 * degradation)) /
-			   (RSSI_RANGE * RSSI_RANGE);
-
-	if (sig_qual > 100)
-		sig_qual = 100;
-	else if (sig_qual < 1)
-		sig_qual = 0;
-
-	return sig_qual;
-}
-
 /**
  * iwl3945_rx_handle - Main entry function for receiving responses from uCode
  *
@@ -1688,7 +1646,7 @@ void iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log)
 	}
 
 #ifdef CONFIG_IWLWIFI_DEBUG
-	if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS))
+	if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log)
 		size = (size > DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES)
 			? DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES : size;
 #else
@@ -3867,7 +3825,6 @@ static int iwl3945_init_drv(struct iwl_priv *priv)
 	priv->retry_rate = 1;
 	priv->ibss_beacon = NULL;
 
-	spin_lock_init(&priv->lock);
 	spin_lock_init(&priv->sta_lock);
 	spin_lock_init(&priv->hcmd_lock);
 
@@ -3936,9 +3893,11 @@ static int iwl3945_setup_mac(struct iwl_priv *priv)
 	/* Tell mac80211 our characteristics */
 	hw->flags = IEEE80211_HW_SIGNAL_DBM |
 		    IEEE80211_HW_NOISE_DBM |
-		    IEEE80211_HW_SPECTRUM_MGMT |
-		    IEEE80211_HW_SUPPORTS_PS |
-		    IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
+		    IEEE80211_HW_SPECTRUM_MGMT;
+
+	if (!priv->cfg->broken_powersave)
+		hw->flags |= IEEE80211_HW_SUPPORTS_PS |
+			     IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
 
 	hw->wiphy->interface_modes =
 		BIT(NL80211_IFTYPE_STATION) |
@@ -4057,10 +4016,11 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	 * PCI Tx retries from interfering with C3 CPU state */
 	pci_write_config_byte(pdev, 0x41, 0x00);
 
-	/* this spin lock will be used in apm_ops.init and EEPROM access
+	/* these spin locks will be used in apm_ops.init and EEPROM access
 	 * we should init now
 	 */
 	spin_lock_init(&priv->reg_lock);
+	spin_lock_init(&priv->lock);
 
 	/***********************
 	 * 4. Read EEPROM