iwlwifi: move DVM code into subdirectory

Since we're working on another mode/driver
inside iwlwifi, move the current one into a
subdirectory to more cleanly separate the
code. While at it, rename all the files.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

1 files changed, 0 insertions, 1171 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
deleted file mode 100644
index a32b35ea9e6..00000000000
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ /dev/null
@@ -1,1171 +0,0 @@
-/******************************************************************************
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *****************************************************************************/
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/etherdevice.h>
-#include <net/mac80211.h>
-
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
-#include "iwl-io.h"
-#include "iwl-agn.h"
-#include "iwl-trans.h"
-
-/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
- * sending probe req.  This should be set long enough to hear probe responses
- * from more than one AP.  */
-#define IWL_ACTIVE_DWELL_TIME_24    (30)       /* all times in msec */
-#define IWL_ACTIVE_DWELL_TIME_52    (20)
-
-#define IWL_ACTIVE_DWELL_FACTOR_24GHZ (3)
-#define IWL_ACTIVE_DWELL_FACTOR_52GHZ (2)
-
-/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
- * Must be set longer than active dwell time.
- * For the most reliable scan, set > AP beacon interval (typically 100msec). */
-#define IWL_PASSIVE_DWELL_TIME_24   (20)       /* all times in msec */
-#define IWL_PASSIVE_DWELL_TIME_52   (10)
-#define IWL_PASSIVE_DWELL_BASE      (100)
-#define IWL_CHANNEL_TUNE_TIME       5
-#define MAX_SCAN_CHANNEL	    50
-
-static int iwl_send_scan_abort(struct iwl_priv *priv)
-{
-	int ret;
-	struct iwl_host_cmd cmd = {
-		.id = REPLY_SCAN_ABORT_CMD,
-		.flags = CMD_SYNC | CMD_WANT_SKB,
-	};
-	__le32 *status;
-
-	/* Exit instantly with error when device is not ready
-	 * to receive scan abort command or it does not perform
-	 * hardware scan currently */
-	if (!test_bit(STATUS_READY, &priv->status) ||
-	    !test_bit(STATUS_GEO_CONFIGURED, &priv->status) ||
-	    !test_bit(STATUS_SCAN_HW, &priv->status) ||
-	    test_bit(STATUS_FW_ERROR, &priv->status))
-		return -EIO;
-
-	ret = iwl_dvm_send_cmd(priv, &cmd);
-	if (ret)
-		return ret;
-
-	status = (void *)cmd.resp_pkt->data;
-	if (*status != CAN_ABORT_STATUS) {
-		/* The scan abort will return 1 for success or
-		 * 2 for "failure".  A failure condition can be
-		 * due to simply not being in an active scan which
-		 * can occur if we send the scan abort before we
-		 * the microcode has notified us that a scan is
-		 * completed. */
-		IWL_DEBUG_SCAN(priv, "SCAN_ABORT ret %d.\n",
-			       le32_to_cpu(*status));
-		ret = -EIO;
-	}
-
-	iwl_free_resp(&cmd);
-	return ret;
-}
-
-static void iwl_complete_scan(struct iwl_priv *priv, bool aborted)
-{
-	/* check if scan was requested from mac80211 */
-	if (priv->scan_request) {
-		IWL_DEBUG_SCAN(priv, "Complete scan in mac80211\n");
-		ieee80211_scan_completed(priv->hw, aborted);
-	}
-
-	if (priv->scan_type == IWL_SCAN_ROC)
-		iwl_scan_roc_expired(priv);
-
-	priv->scan_type = IWL_SCAN_NORMAL;
-	priv->scan_vif = NULL;
-	priv->scan_request = NULL;
-}
-
-static void iwl_process_scan_complete(struct iwl_priv *priv)
-{
-	bool aborted;
-
-	lockdep_assert_held(&priv->mutex);
-
-	if (!test_and_clear_bit(STATUS_SCAN_COMPLETE, &priv->status))
-		return;
-
-	IWL_DEBUG_SCAN(priv, "Completed scan.\n");
-
-	cancel_delayed_work(&priv->scan_check);
-
-	aborted = test_and_clear_bit(STATUS_SCAN_ABORTING, &priv->status);
-	if (aborted)
-		IWL_DEBUG_SCAN(priv, "Aborted scan completed.\n");
-
-	if (!test_and_clear_bit(STATUS_SCANNING, &priv->status)) {
-		IWL_DEBUG_SCAN(priv, "Scan already completed.\n");
-		goto out_settings;
-	}
-
-	if (priv->scan_type == IWL_SCAN_ROC)
-		iwl_scan_roc_expired(priv);
-
-	if (priv->scan_type != IWL_SCAN_NORMAL && !aborted) {
-		int err;
-
-		/* Check if mac80211 requested scan during our internal scan */
-		if (priv->scan_request == NULL)
-			goto out_complete;
-
-		/* If so request a new scan */
-		err = iwl_scan_initiate(priv, priv->scan_vif, IWL_SCAN_NORMAL,
-					priv->scan_request->channels[0]->band);
-		if (err) {
-			IWL_DEBUG_SCAN(priv,
-				"failed to initiate pending scan: %d\n", err);
-			aborted = true;
-			goto out_complete;
-		}
-
-		return;
-	}
-
-out_complete:
-	iwl_complete_scan(priv, aborted);
-
-out_settings:
-	/* Can we still talk to firmware ? */
-	if (!iwl_is_ready_rf(priv))
-		return;
-
-	iwlagn_post_scan(priv);
-}
-
-void iwl_force_scan_end(struct iwl_priv *priv)
-{
-	lockdep_assert_held(&priv->mutex);
-
-	if (!test_bit(STATUS_SCANNING, &priv->status)) {
-		IWL_DEBUG_SCAN(priv, "Forcing scan end while not scanning\n");
-		return;
-	}
-
-	IWL_DEBUG_SCAN(priv, "Forcing scan end\n");
-	clear_bit(STATUS_SCANNING, &priv->status);
-	clear_bit(STATUS_SCAN_HW, &priv->status);
-	clear_bit(STATUS_SCAN_ABORTING, &priv->status);
-	clear_bit(STATUS_SCAN_COMPLETE, &priv->status);
-	iwl_complete_scan(priv, true);
-}
-
-static void iwl_do_scan_abort(struct iwl_priv *priv)
-{
-	int ret;
-
-	lockdep_assert_held(&priv->mutex);
-
-	if (!test_bit(STATUS_SCANNING, &priv->status)) {
-		IWL_DEBUG_SCAN(priv, "Not performing scan to abort\n");
-		return;
-	}
-
-	if (test_and_set_bit(STATUS_SCAN_ABORTING, &priv->status)) {
-		IWL_DEBUG_SCAN(priv, "Scan abort in progress\n");
-		return;
-	}
-
-	ret = iwl_send_scan_abort(priv);
-	if (ret) {
-		IWL_DEBUG_SCAN(priv, "Send scan abort failed %d\n", ret);
-		iwl_force_scan_end(priv);
-	} else
-		IWL_DEBUG_SCAN(priv, "Successfully send scan abort\n");
-}
-
-/**
- * iwl_scan_cancel - Cancel any currently executing HW scan
- */
-int iwl_scan_cancel(struct iwl_priv *priv)
-{
-	IWL_DEBUG_SCAN(priv, "Queuing abort scan\n");
-	queue_work(priv->workqueue, &priv->abort_scan);
-	return 0;
-}
-
-/**
- * iwl_scan_cancel_timeout - Cancel any currently executing HW scan
- * @ms: amount of time to wait (in milliseconds) for scan to abort
- *
- */
-void iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms)
-{
-	unsigned long timeout = jiffies + msecs_to_jiffies(ms);
-
-	lockdep_assert_held(&priv->mutex);
-
-	IWL_DEBUG_SCAN(priv, "Scan cancel timeout\n");
-
-	iwl_do_scan_abort(priv);
-
-	while (time_before_eq(jiffies, timeout)) {
-		if (!test_bit(STATUS_SCAN_HW, &priv->status))
-			goto finished;
-		msleep(20);
-	}
-
-	return;
-
- finished:
-	/*
-	 * Now STATUS_SCAN_HW is clear. This means that the
-	 * device finished, but the background work is going
-	 * to execute at best as soon as we release the mutex.
-	 * Since we need to be able to issue a new scan right
-	 * after this function returns, run the complete here.
-	 * The STATUS_SCAN_COMPLETE bit will then be cleared
-	 * and prevent the background work from "completing"
-	 * a possible new scan.
-	 */
-	iwl_process_scan_complete(priv);
-}
-
-/* Service response to REPLY_SCAN_CMD (0x80) */
-static int iwl_rx_reply_scan(struct iwl_priv *priv,
-			      struct iwl_rx_cmd_buffer *rxb,
-			      struct iwl_device_cmd *cmd)
-{
-#ifdef CONFIG_IWLWIFI_DEBUG
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-	struct iwl_scanreq_notification *notif = (void *)pkt->data;
-
-	IWL_DEBUG_SCAN(priv, "Scan request status = 0x%x\n", notif->status);
-#endif
-	return 0;
-}
-
-/* Service SCAN_START_NOTIFICATION (0x82) */
-static int iwl_rx_scan_start_notif(struct iwl_priv *priv,
-				    struct iwl_rx_cmd_buffer *rxb,
-				    struct iwl_device_cmd *cmd)
-{
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-	struct iwl_scanstart_notification *notif = (void *)pkt->data;
-
-	priv->scan_start_tsf = le32_to_cpu(notif->tsf_low);
-	IWL_DEBUG_SCAN(priv, "Scan start: "
-		       "%d [802.11%s] "
-		       "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n",
-		       notif->channel,
-		       notif->band ? "bg" : "a",
-		       le32_to_cpu(notif->tsf_high),
-		       le32_to_cpu(notif->tsf_low),
-		       notif->status, notif->beacon_timer);
-
-	if (priv->scan_type == IWL_SCAN_ROC &&
-	    !priv->hw_roc_start_notified) {
-		ieee80211_ready_on_channel(priv->hw);
-		priv->hw_roc_start_notified = true;
-	}
-
-	return 0;
-}
-
-/* Service SCAN_RESULTS_NOTIFICATION (0x83) */
-static int iwl_rx_scan_results_notif(struct iwl_priv *priv,
-				      struct iwl_rx_cmd_buffer *rxb,
-				      struct iwl_device_cmd *cmd)
-{
-#ifdef CONFIG_IWLWIFI_DEBUG
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-	struct iwl_scanresults_notification *notif = (void *)pkt->data;
-
-	IWL_DEBUG_SCAN(priv, "Scan ch.res: "
-		       "%d [802.11%s] "
-		       "probe status: %u:%u "
-		       "(TSF: 0x%08X:%08X) - %d "
-		       "elapsed=%lu usec\n",
-		       notif->channel,
-		       notif->band ? "bg" : "a",
-		       notif->probe_status, notif->num_probe_not_sent,
-		       le32_to_cpu(notif->tsf_high),
-		       le32_to_cpu(notif->tsf_low),
-		       le32_to_cpu(notif->statistics[0]),
-		       le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf);
-#endif
-	return 0;
-}
-
-/* Service SCAN_COMPLETE_NOTIFICATION (0x84) */
-static int iwl_rx_scan_complete_notif(struct iwl_priv *priv,
-				       struct iwl_rx_cmd_buffer *rxb,
-				       struct iwl_device_cmd *cmd)
-{
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-	struct iwl_scancomplete_notification *scan_notif = (void *)pkt->data;
-
-	IWL_DEBUG_SCAN(priv, "Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
-		       scan_notif->scanned_channels,
-		       scan_notif->tsf_low,
-		       scan_notif->tsf_high, scan_notif->status);
-
-	IWL_DEBUG_SCAN(priv, "Scan on %sGHz took %dms\n",
-		       (priv->scan_band == IEEE80211_BAND_2GHZ) ? "2.4" : "5.2",
-		       jiffies_to_msecs(jiffies - priv->scan_start));
-
-	/*
-	 * When aborting, we run the scan completed background work inline
-	 * and the background work must then do nothing. The SCAN_COMPLETE
-	 * bit helps implement that logic and thus needs to be set before
-	 * queueing the work. Also, since the scan abort waits for SCAN_HW
-	 * to clear, we need to set SCAN_COMPLETE before clearing SCAN_HW
-	 * to avoid a race there.
-	 */
-	set_bit(STATUS_SCAN_COMPLETE, &priv->status);
-	clear_bit(STATUS_SCAN_HW, &priv->status);
-	queue_work(priv->workqueue, &priv->scan_completed);
-
-	if (priv->iw_mode != NL80211_IFTYPE_ADHOC &&
-	    iwl_advanced_bt_coexist(priv) &&
-	    priv->bt_status != scan_notif->bt_status) {
-		if (scan_notif->bt_status) {
-			/* BT on */
-			if (!priv->bt_ch_announce)
-				priv->bt_traffic_load =
-					IWL_BT_COEX_TRAFFIC_LOAD_HIGH;
-			/*
-			 * otherwise, no traffic load information provided
-			 * no changes made
-			 */
-		} else {
-			/* BT off */
-			priv->bt_traffic_load =
-				IWL_BT_COEX_TRAFFIC_LOAD_NONE;
-		}
-		priv->bt_status = scan_notif->bt_status;
-		queue_work(priv->workqueue,
-			   &priv->bt_traffic_change_work);
-	}
-	return 0;
-}
-
-void iwl_setup_rx_scan_handlers(struct iwl_priv *priv)
-{
-	/* scan handlers */
-	priv->rx_handlers[REPLY_SCAN_CMD] = iwl_rx_reply_scan;
-	priv->rx_handlers[SCAN_START_NOTIFICATION] = iwl_rx_scan_start_notif;
-	priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] =
-					iwl_rx_scan_results_notif;
-	priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] =
-					iwl_rx_scan_complete_notif;
-}
-
-static u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
-				     enum ieee80211_band band, u8 n_probes)
-{
-	if (band == IEEE80211_BAND_5GHZ)
-		return IWL_ACTIVE_DWELL_TIME_52 +
-			IWL_ACTIVE_DWELL_FACTOR_52GHZ * (n_probes + 1);
-	else
-		return IWL_ACTIVE_DWELL_TIME_24 +
-			IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1);
-}
-
-static u16 iwl_limit_dwell(struct iwl_priv *priv, u16 dwell_time)
-{
-	struct iwl_rxon_context *ctx;
-
-	/*
-	 * If we're associated, we clamp the dwell time 98%
-	 * of the smallest beacon interval (minus 2 * channel
-	 * tune time)
-	 */
-	for_each_context(priv, ctx) {
-		u16 value;
-
-		switch (ctx->staging.dev_type) {
-		case RXON_DEV_TYPE_P2P:
-			/* no timing constraints */
-			continue;
-		case RXON_DEV_TYPE_ESS:
-		default:
-			/* timing constraints if associated */
-			if (!iwl_is_associated_ctx(ctx))
-				continue;
-			break;
-		case RXON_DEV_TYPE_CP:
-		case RXON_DEV_TYPE_2STA:
-			/*
-			 * These seem to always have timers for TBTT
-			 * active in uCode even when not associated yet.
-			 */
-			break;
-		}
-
-		value = ctx->beacon_int;
-		if (!value)
-			value = IWL_PASSIVE_DWELL_BASE;
-		value = (value * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
-		dwell_time = min(value, dwell_time);
-	}
-
-	return dwell_time;
-}
-
-static u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
-				      enum ieee80211_band band)
-{
-	u16 passive = (band == IEEE80211_BAND_2GHZ) ?
-	    IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 :
-	    IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52;
-
-	return iwl_limit_dwell(priv, passive);
-}
-
-/* Return valid, unused, channel for a passive scan to reset the RF */
-static u8 iwl_get_single_channel_number(struct iwl_priv *priv,
-					enum ieee80211_band band)
-{
-	struct ieee80211_supported_band *sband = priv->hw->wiphy->bands[band];
-	struct iwl_rxon_context *ctx;
-	int i;
-
-	for (i = 0; i < sband->n_channels; i++) {
-		bool busy = false;
-
-		for_each_context(priv, ctx) {
-			busy = sband->channels[i].hw_value ==
-				le16_to_cpu(ctx->staging.channel);
-			if (busy)
-				break;
-		}
-
-		if (busy)
-			continue;
-
-		if (!(sband->channels[i].flags & IEEE80211_CHAN_DISABLED))
-			return sband->channels[i].hw_value;
-	}
-
-	return 0;
-}
-
-static int iwl_get_single_channel_for_scan(struct iwl_priv *priv,
-					   struct ieee80211_vif *vif,
-					   enum ieee80211_band band,
-					   struct iwl_scan_channel *scan_ch)
-{
-	const struct ieee80211_supported_band *sband;
-	u16 passive_dwell = 0;
-	u16 active_dwell = 0;
-	int added = 0;
-	u16 channel = 0;
-
-	sband = iwl_get_hw_mode(priv, band);
-	if (!sband) {
-		IWL_ERR(priv, "invalid band\n");
-		return added;
-	}
-
-	active_dwell = iwl_get_active_dwell_time(priv, band, 0);
-	passive_dwell = iwl_get_passive_dwell_time(priv, band);
-
-	if (passive_dwell <= active_dwell)
-		passive_dwell = active_dwell + 1;
-
-	channel = iwl_get_single_channel_number(priv, band);
-	if (channel) {
-		scan_ch->channel = cpu_to_le16(channel);
-		scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
-		scan_ch->active_dwell = cpu_to_le16(active_dwell);
-		scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
-		/* Set txpower levels to defaults */
-		scan_ch->dsp_atten = 110;
-		if (band == IEEE80211_BAND_5GHZ)
-			scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
-		else
-			scan_ch->tx_gain = ((1 << 5) | (5 << 3));
-		added++;
-	} else
-		IWL_ERR(priv, "no valid channel found\n");
-	return added;
-}
-
-static int iwl_get_channels_for_scan(struct iwl_priv *priv,
-				     struct ieee80211_vif *vif,
-				     enum ieee80211_band band,
-				     u8 is_active, u8 n_probes,
-				     struct iwl_scan_channel *scan_ch)
-{
-	struct ieee80211_channel *chan;
-	const struct ieee80211_supported_band *sband;
-	u16 passive_dwell = 0;
-	u16 active_dwell = 0;
-	int added, i;
-	u16 channel;
-
-	sband = iwl_get_hw_mode(priv, band);
-	if (!sband)
-		return 0;
-
-	active_dwell = iwl_get_active_dwell_time(priv, band, n_probes);
-	passive_dwell = iwl_get_passive_dwell_time(priv, band);
-
-	if (passive_dwell <= active_dwell)
-		passive_dwell = active_dwell + 1;
-
-	for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) {
-		chan = priv->scan_request->channels[i];
-
-		if (chan->band != band)
-			continue;
-
-		channel = chan->hw_value;
-		scan_ch->channel = cpu_to_le16(channel);
-
-		if (!is_active || (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN))
-			scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
-		else
-			scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
-
-		if (n_probes)
-			scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes);
-
-		scan_ch->active_dwell = cpu_to_le16(active_dwell);
-		scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
-
-		/* Set txpower levels to defaults */
-		scan_ch->dsp_atten = 110;
-
-		/* NOTE: if we were doing 6Mb OFDM for scans we'd use
-		 * power level:
-		 * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
-		 */
-		if (band == IEEE80211_BAND_5GHZ)
-			scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
-		else
-			scan_ch->tx_gain = ((1 << 5) | (5 << 3));
-
-		IWL_DEBUG_SCAN(priv, "Scanning ch=%d prob=0x%X [%s %d]\n",
-			       channel, le32_to_cpu(scan_ch->type),
-			       (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
-				"ACTIVE" : "PASSIVE",
-			       (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
-			       active_dwell : passive_dwell);
-
-		scan_ch++;
-		added++;
-	}
-
-	IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added);
-	return added;
-}
-
-/**
- * iwl_fill_probe_req - fill in all required fields and IE for probe request
- */
-
-static u16 iwl_fill_probe_req(struct ieee80211_mgmt *frame, const u8 *ta,
-			      const u8 *ies, int ie_len, const u8 *ssid,
-			      u8 ssid_len, int left)
-{
-	int len = 0;
-	u8 *pos = NULL;
-
-	/* Make sure there is enough space for the probe request,
-	 * two mandatory IEs and the data */
-	left -= 24;
-	if (left < 0)
-		return 0;
-
-	frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
-	memcpy(frame->da, iwl_bcast_addr, ETH_ALEN);
-	memcpy(frame->sa, ta, ETH_ALEN);
-	memcpy(frame->bssid, iwl_bcast_addr, ETH_ALEN);
-	frame->seq_ctrl = 0;
-
-	len += 24;
-
-	/* ...next IE... */
-	pos = &frame->u.probe_req.variable[0];
-
-	/* fill in our SSID IE */
-	left -= ssid_len + 2;
-	if (left < 0)
-		return 0;
-	*pos++ = WLAN_EID_SSID;
-	*pos++ = ssid_len;
-	if (ssid && ssid_len) {
-		memcpy(pos, ssid, ssid_len);
-		pos += ssid_len;
-	}
-
-	len += ssid_len + 2;
-
-	if (WARN_ON(left < ie_len))
-		return len;
-
-	if (ies && ie_len) {
-		memcpy(pos, ies, ie_len);
-		len += ie_len;
-	}
-
-	return (u16)len;
-}
-
-static int iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
-{
-	struct iwl_host_cmd cmd = {
-		.id = REPLY_SCAN_CMD,
-		.len = { sizeof(struct iwl_scan_cmd), },
-		.flags = CMD_SYNC,
-	};
-	struct iwl_scan_cmd *scan;
-	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-	u32 rate_flags = 0;
-	u16 cmd_len = 0;
-	u16 rx_chain = 0;
-	enum ieee80211_band band;
-	u8 n_probes = 0;
-	u8 rx_ant = priv->hw_params.valid_rx_ant;
-	u8 rate;
-	bool is_active = false;
-	int  chan_mod;
-	u8 active_chains;
-	u8 scan_tx_antennas = priv->hw_params.valid_tx_ant;
-	int ret;
-	int scan_cmd_size = sizeof(struct iwl_scan_cmd) +
-			    MAX_SCAN_CHANNEL * sizeof(struct iwl_scan_channel) +
-			    priv->fw->ucode_capa.max_probe_length;
-	const u8 *ssid = NULL;
-	u8 ssid_len = 0;
-
-	if (WARN_ON_ONCE(priv->scan_request &&
-			 priv->scan_request->n_channels > MAX_SCAN_CHANNEL))
-		return -EINVAL;
-
-	lockdep_assert_held(&priv->mutex);
-
-	if (vif)
-		ctx = iwl_rxon_ctx_from_vif(vif);
-
-	if (!priv->scan_cmd) {
-		priv->scan_cmd = kmalloc(scan_cmd_size, GFP_KERNEL);
-		if (!priv->scan_cmd) {
-			IWL_DEBUG_SCAN(priv,
-				       "fail to allocate memory for scan\n");
-			return -ENOMEM;
-		}
-	}
-	scan = priv->scan_cmd;
-	memset(scan, 0, scan_cmd_size);
-
-	scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
-	scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
-
-	if (priv->scan_type != IWL_SCAN_ROC &&
-	    iwl_is_any_associated(priv)) {
-		u16 interval = 0;
-		u32 extra;
-		u32 suspend_time = 100;
-		u32 scan_suspend_time = 100;
-
-		IWL_DEBUG_INFO(priv, "Scanning while associated...\n");
-		switch (priv->scan_type) {
-		case IWL_SCAN_ROC:
-			WARN_ON(1);
-			break;
-		case IWL_SCAN_RADIO_RESET:
-			interval = 0;
-			break;
-		case IWL_SCAN_NORMAL:
-			interval = vif->bss_conf.beacon_int;
-			break;
-		}
-
-		scan->suspend_time = 0;
-		scan->max_out_time = cpu_to_le32(200 * 1024);
-		if (!interval)
-			interval = suspend_time;
-
-		extra = (suspend_time / interval) << 22;
-		scan_suspend_time = (extra |
-		    ((suspend_time % interval) * 1024));
-		scan->suspend_time = cpu_to_le32(scan_suspend_time);
-		IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n",
-			       scan_suspend_time, interval);
-	} else if (priv->scan_type == IWL_SCAN_ROC) {
-		scan->suspend_time = 0;
-		scan->max_out_time = 0;
-		scan->quiet_time = 0;
-		scan->quiet_plcp_th = 0;
-	}
-
-	switch (priv->scan_type) {
-	case IWL_SCAN_RADIO_RESET:
-		IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
-		break;
-	case IWL_SCAN_NORMAL:
-		if (priv->scan_request->n_ssids) {
-			int i, p = 0;
-			IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
-			/*
-			 * The highest priority SSID is inserted to the
-			 * probe request template.
-			 */
-			ssid_len = priv->scan_request->ssids[0].ssid_len;
-			ssid = priv->scan_request->ssids[0].ssid;
-
-			/*
-			 * Invert the order of ssids, the firmware will invert
-			 * it back.
-			 */
-			for (i = priv->scan_request->n_ssids - 1; i >= 1; i--) {
-				scan->direct_scan[p].id = WLAN_EID_SSID;
-				scan->direct_scan[p].len =
-					priv->scan_request->ssids[i].ssid_len;
-				memcpy(scan->direct_scan[p].ssid,
-				       priv->scan_request->ssids[i].ssid,
-				       priv->scan_request->ssids[i].ssid_len);
-				n_probes++;
-				p++;
-			}
-			is_active = true;
-		} else
-			IWL_DEBUG_SCAN(priv, "Start passive scan.\n");
-		break;
-	case IWL_SCAN_ROC:
-		IWL_DEBUG_SCAN(priv, "Start ROC scan.\n");
-		break;
-	}
-
-	scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
-	scan->tx_cmd.sta_id = ctx->bcast_sta_id;
-	scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
-
-	switch (priv->scan_band) {
-	case IEEE80211_BAND_2GHZ:
-		scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
-		chan_mod = le32_to_cpu(
-			priv->contexts[IWL_RXON_CTX_BSS].active.flags &
-						RXON_FLG_CHANNEL_MODE_MSK)
-				       >> RXON_FLG_CHANNEL_MODE_POS;
-		if ((priv->scan_request && priv->scan_request->no_cck) ||
-		    chan_mod == CHANNEL_MODE_PURE_40) {
-			rate = IWL_RATE_6M_PLCP;
-		} else {
-			rate = IWL_RATE_1M_PLCP;
-			rate_flags = RATE_MCS_CCK_MSK;
-		}
-		/*
-		 * Internal scans are passive, so we can indiscriminately set
-		 * the BT ignore flag on 2.4 GHz since it applies to TX only.
-		 */
-		if (priv->cfg->bt_params &&
-		    priv->cfg->bt_params->advanced_bt_coexist)
-			scan->tx_cmd.tx_flags |= TX_CMD_FLG_IGNORE_BT;
-		break;
-	case IEEE80211_BAND_5GHZ:
-		rate = IWL_RATE_6M_PLCP;
-		break;
-	default:
-		IWL_WARN(priv, "Invalid scan band\n");
-		return -EIO;
-	}
-
-	/*
-	 * If active scanning is requested but a certain channel is
-	 * marked passive, we can do active scanning if we detect
-	 * transmissions.
-	 *
-	 * There is an issue with some firmware versions that triggers
-	 * a sysassert on a "good CRC threshold" of zero (== disabled),
-	 * on a radar channel even though this means that we should NOT
-	 * send probes.
-	 *
-	 * The "good CRC threshold" is the number of frames that we
-	 * need to receive during our dwell time on a channel before
-	 * sending out probes -- setting this to a huge value will
-	 * mean we never reach it, but at the same time work around
-	 * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER
-	 * here instead of IWL_GOOD_CRC_TH_DISABLED.
-	 *
-	 * This was fixed in later versions along with some other
-	 * scan changes, and the threshold behaves as a flag in those
-	 * versions.
-	 */
-	if (priv->new_scan_threshold_behaviour)
-		scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
-						IWL_GOOD_CRC_TH_DISABLED;
-	else
-		scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
-						IWL_GOOD_CRC_TH_NEVER;
-
-	band = priv->scan_band;
-
-	if (band == IEEE80211_BAND_2GHZ &&
-	    priv->cfg->bt_params &&
-	    priv->cfg->bt_params->advanced_bt_coexist) {
-		/* transmit 2.4 GHz probes only on first antenna */
-		scan_tx_antennas = first_antenna(scan_tx_antennas);
-	}
-
-	priv->scan_tx_ant[band] = iwl_toggle_tx_ant(priv,
-						    priv->scan_tx_ant[band],
-						    scan_tx_antennas);
-	rate_flags |= iwl_ant_idx_to_flags(priv->scan_tx_ant[band]);
-	scan->tx_cmd.rate_n_flags = iwl_hw_set_rate_n_flags(rate, rate_flags);
-
-	/*
-	 * In power save mode while associated use one chain,
-	 * otherwise use all chains
-	 */
-	if (test_bit(STATUS_POWER_PMI, &priv->status) &&
-	    !(priv->hw->conf.flags & IEEE80211_CONF_IDLE)) {
-		/* rx_ant has been set to all valid chains previously */
-		active_chains = rx_ant &
-				((u8)(priv->chain_noise_data.active_chains));
-		if (!active_chains)
-			active_chains = rx_ant;
-
-		IWL_DEBUG_SCAN(priv, "chain_noise_data.active_chains: %u\n",
-				priv->chain_noise_data.active_chains);
-
-		rx_ant = first_antenna(active_chains);
-	}
-	if (priv->cfg->bt_params &&
-	    priv->cfg->bt_params->advanced_bt_coexist &&
-	    priv->bt_full_concurrent) {
-		/* operated as 1x1 in full concurrency mode */
-		rx_ant = first_antenna(rx_ant);
-	}
-
-	/* MIMO is not used here, but value is required */
-	rx_chain |=
-		priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
-	rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
-	rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
-	rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
-	scan->rx_chain = cpu_to_le16(rx_chain);
-	switch (priv->scan_type) {
-	case IWL_SCAN_NORMAL:
-		cmd_len = iwl_fill_probe_req(
-					(struct ieee80211_mgmt *)scan->data,
-					vif->addr,
-					priv->scan_request->ie,
-					priv->scan_request->ie_len,
-					ssid, ssid_len,
-					scan_cmd_size - sizeof(*scan));
-		break;
-	case IWL_SCAN_RADIO_RESET:
-	case IWL_SCAN_ROC:
-		/* use bcast addr, will not be transmitted but must be valid */
-		cmd_len = iwl_fill_probe_req(
-					(struct ieee80211_mgmt *)scan->data,
-					iwl_bcast_addr, NULL, 0,
-					NULL, 0,
-					scan_cmd_size - sizeof(*scan));
-		break;
-	default:
-		BUG();
-	}
-	scan->tx_cmd.len = cpu_to_le16(cmd_len);
-
-	scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
-			       RXON_FILTER_BCON_AWARE_MSK);
-
-	switch (priv->scan_type) {
-	case IWL_SCAN_RADIO_RESET:
-		scan->channel_count =
-			iwl_get_single_channel_for_scan(priv, vif, band,
-				(void *)&scan->data[cmd_len]);
-		break;
-	case IWL_SCAN_NORMAL:
-		scan->channel_count =
-			iwl_get_channels_for_scan(priv, vif, band,
-				is_active, n_probes,
-				(void *)&scan->data[cmd_len]);
-		break;
-	case IWL_SCAN_ROC: {
-		struct iwl_scan_channel *scan_ch;
-		int n_chan, i;
-		u16 dwell;
-
-		dwell = iwl_limit_dwell(priv, priv->hw_roc_duration);
-		n_chan = DIV_ROUND_UP(priv->hw_roc_duration, dwell);
-
-		scan->channel_count = n_chan;
-
-		scan_ch = (void *)&scan->data[cmd_len];
-
-		for (i = 0; i < n_chan; i++) {
-			scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
-			scan_ch->channel =
-				cpu_to_le16(priv->hw_roc_channel->hw_value);
-
-			if (i == n_chan - 1)
-				dwell = priv->hw_roc_duration - i * dwell;
-
-			scan_ch->active_dwell =
-			scan_ch->passive_dwell = cpu_to_le16(dwell);
-
-			/* Set txpower levels to defaults */
-			scan_ch->dsp_atten = 110;
-
-			/* NOTE: if we were doing 6Mb OFDM for scans we'd use
-			 * power level:
-			 * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
-			 */
-			if (priv->hw_roc_channel->band == IEEE80211_BAND_5GHZ)
-				scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
-			else
-				scan_ch->tx_gain = ((1 << 5) | (5 << 3));
-
-			scan_ch++;
-		}
-		}
-
-		break;
-	}
-
-	if (scan->channel_count == 0) {
-		IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
-		return -EIO;
-	}
-
-	cmd.len[0] += le16_to_cpu(scan->tx_cmd.len) +
-	    scan->channel_count * sizeof(struct iwl_scan_channel);
-	cmd.data[0] = scan;
-	cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY;
-	scan->len = cpu_to_le16(cmd.len[0]);
-
-	/* set scan bit here for PAN params */
-	set_bit(STATUS_SCAN_HW, &priv->status);
-
-	ret = iwlagn_set_pan_params(priv);
-	if (ret) {
-		clear_bit(STATUS_SCAN_HW, &priv->status);
-		return ret;
-	}
-
-	ret = iwl_dvm_send_cmd(priv, &cmd);
-	if (ret) {
-		clear_bit(STATUS_SCAN_HW, &priv->status);
-		iwlagn_set_pan_params(priv);
-	}
-
-	return ret;
-}
-
-void iwl_init_scan_params(struct iwl_priv *priv)
-{
-	u8 ant_idx = fls(priv->hw_params.valid_tx_ant) - 1;
-	if (!priv->scan_tx_ant[IEEE80211_BAND_5GHZ])
-		priv->scan_tx_ant[IEEE80211_BAND_5GHZ] = ant_idx;
-	if (!priv->scan_tx_ant[IEEE80211_BAND_2GHZ])
-		priv->scan_tx_ant[IEEE80211_BAND_2GHZ] = ant_idx;
-}
-
-int __must_check iwl_scan_initiate(struct iwl_priv *priv,
-				   struct ieee80211_vif *vif,
-				   enum iwl_scan_type scan_type,
-				   enum ieee80211_band band)
-{
-	int ret;
-
-	lockdep_assert_held(&priv->mutex);
-
-	cancel_delayed_work(&priv->scan_check);
-
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_WARN(priv, "Request scan called when driver not ready.\n");
-		return -EIO;
-	}
-
-	if (test_bit(STATUS_SCAN_HW, &priv->status)) {
-		IWL_DEBUG_SCAN(priv,
-			"Multiple concurrent scan requests in parallel.\n");
-		return -EBUSY;
-	}
-
-	if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
-		IWL_DEBUG_SCAN(priv, "Scan request while abort pending.\n");
-		return -EBUSY;
-	}
-
-	IWL_DEBUG_SCAN(priv, "Starting %sscan...\n",
-			scan_type == IWL_SCAN_NORMAL ? "" :
-			scan_type == IWL_SCAN_ROC ? "remain-on-channel " :
-			"internal short ");
-
-	set_bit(STATUS_SCANNING, &priv->status);
-	priv->scan_type = scan_type;
-	priv->scan_start = jiffies;
-	priv->scan_band = band;
-
-	ret = iwlagn_request_scan(priv, vif);
-	if (ret) {
-		clear_bit(STATUS_SCANNING, &priv->status);
-		priv->scan_type = IWL_SCAN_NORMAL;
-		return ret;
-	}
-
-	queue_delayed_work(priv->workqueue, &priv->scan_check,
-			   IWL_SCAN_CHECK_WATCHDOG);
-
-	return 0;
-}
-
-
-/*
- * internal short scan, this function should only been called while associated.
- * It will reset and tune the radio to prevent possible RF related problem
- */
-void iwl_internal_short_hw_scan(struct iwl_priv *priv)
-{
-	queue_work(priv->workqueue, &priv->start_internal_scan);
-}
-
-static void iwl_bg_start_internal_scan(struct work_struct *work)
-{
-	struct iwl_priv *priv =
-		container_of(work, struct iwl_priv, start_internal_scan);
-
-	IWL_DEBUG_SCAN(priv, "Start internal scan\n");
-
-	mutex_lock(&priv->mutex);
-
-	if (priv->scan_type == IWL_SCAN_RADIO_RESET) {
-		IWL_DEBUG_SCAN(priv, "Internal scan already in progress\n");
-		goto unlock;
-	}
-
-	if (test_bit(STATUS_SCANNING, &priv->status)) {
-		IWL_DEBUG_SCAN(priv, "Scan already in progress.\n");
-		goto unlock;
-	}
-
-	if (iwl_scan_initiate(priv, NULL, IWL_SCAN_RADIO_RESET, priv->band))
-		IWL_DEBUG_SCAN(priv, "failed to start internal short scan\n");
- unlock:
-	mutex_unlock(&priv->mutex);
-}
-
-static void iwl_bg_scan_check(struct work_struct *data)
-{
-	struct iwl_priv *priv =
-	    container_of(data, struct iwl_priv, scan_check.work);
-
-	IWL_DEBUG_SCAN(priv, "Scan check work\n");
-
-	/* Since we are here firmware does not finish scan and
-	 * most likely is in bad shape, so we don't bother to
-	 * send abort command, just force scan complete to mac80211 */
-	mutex_lock(&priv->mutex);
-	iwl_force_scan_end(priv);
-	mutex_unlock(&priv->mutex);
-}
-
-static void iwl_bg_abort_scan(struct work_struct *work)
-{
-	struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan);
-
-	IWL_DEBUG_SCAN(priv, "Abort scan work\n");
-
-	/* We keep scan_check work queued in case when firmware will not
-	 * report back scan completed notification */
-	mutex_lock(&priv->mutex);
-	iwl_scan_cancel_timeout(priv, 200);
-	mutex_unlock(&priv->mutex);
-}
-
-static void iwl_bg_scan_completed(struct work_struct *work)
-{
-	struct iwl_priv *priv =
-		container_of(work, struct iwl_priv, scan_completed);
-
-	mutex_lock(&priv->mutex);
-	iwl_process_scan_complete(priv);
-	mutex_unlock(&priv->mutex);
-}
-
-void iwl_setup_scan_deferred_work(struct iwl_priv *priv)
-{
-	INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed);
-	INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan);
-	INIT_WORK(&priv->start_internal_scan, iwl_bg_start_internal_scan);
-	INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check);
-}
-
-void iwl_cancel_scan_deferred_work(struct iwl_priv *priv)
-{
-	cancel_work_sync(&priv->start_internal_scan);
-	cancel_work_sync(&priv->abort_scan);
-	cancel_work_sync(&priv->scan_completed);
-
-	if (cancel_delayed_work_sync(&priv->scan_check)) {
-		mutex_lock(&priv->mutex);
-		iwl_force_scan_end(priv);
-		mutex_unlock(&priv->mutex);
-	}
-}
-
-void iwl_scan_roc_expired(struct iwl_priv *priv)
-{
-	/*
-	 * The status bit should be set here, to prevent a race
-	 * where the atomic_read returns 1, but before the execution continues
-	 * iwl_scan_offchannel_skb_status() checks if the status bit is set
-	 */
-	set_bit(STATUS_SCAN_ROC_EXPIRED, &priv->status);
-
-	if (atomic_read(&priv->num_aux_in_flight) == 0) {
-		ieee80211_remain_on_channel_expired(priv->hw);
-		priv->hw_roc_channel = NULL;
-		schedule_delayed_work(&priv->hw_roc_disable_work,
-				      10 * HZ);
-
-		clear_bit(STATUS_SCAN_ROC_EXPIRED, &priv->status);
-	} else {
-		IWL_DEBUG_SCAN(priv, "ROC done with %d frames in aux\n",
-			       atomic_read(&priv->num_aux_in_flight));
-	}
-}
-
-void iwl_scan_offchannel_skb(struct iwl_priv *priv)
-{
-	WARN_ON(!priv->hw_roc_start_notified);
-	atomic_inc(&priv->num_aux_in_flight);
-}
-
-void iwl_scan_offchannel_skb_status(struct iwl_priv *priv)
-{
-	if (atomic_dec_return(&priv->num_aux_in_flight) == 0 &&
-	    test_bit(STATUS_SCAN_ROC_EXPIRED, &priv->status)) {
-		IWL_DEBUG_SCAN(priv, "0 aux frames. Calling ROC expired\n");
-		iwl_scan_roc_expired(priv);
-	}
-}