iwlegacy: merge iwl-fh.h into 4965.h

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>

1 files changed, 0 insertions, 417 deletions

diff --git a/drivers/net/wireless/iwlegacy/iwl-fh.h b/drivers/net/wireless/iwlegacy/iwl-fh.h
deleted file mode 100644
index ac7c2128320..00000000000
--- a/drivers/net/wireless/iwlegacy/iwl-fh.h
+++ /dev/null
@@ -1,417 +0,0 @@
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *  * Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *  * Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *  * Neither the name Intel Corporation nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *****************************************************************************/
-#ifndef __il_fh_h__
-#define __il_fh_h__
-
-/****************************/
-/* Flow Handler Definitions */
-/****************************/
-
-/**
- * This I/O area is directly read/writable by driver (e.g. Linux uses writel())
- * Addresses are offsets from device's PCI hardware base address.
- */
-#define FH49_MEM_LOWER_BOUND                   (0x1000)
-#define FH49_MEM_UPPER_BOUND                   (0x2000)
-
-/**
- * Keep-Warm (KW) buffer base address.
- *
- * Driver must allocate a 4KByte buffer that is used by 4965 for keeping the
- * host DRAM powered on (via dummy accesses to DRAM) to maintain low-latency
- * DRAM access when 4965 is Txing or Rxing.  The dummy accesses prevent host
- * from going into a power-savings mode that would cause higher DRAM latency,
- * and possible data over/under-runs, before all Tx/Rx is complete.
- *
- * Driver loads FH49_KW_MEM_ADDR_REG with the physical address (bits 35:4)
- * of the buffer, which must be 4K aligned.  Once this is set up, the 4965
- * automatically invokes keep-warm accesses when normal accesses might not
- * be sufficient to maintain fast DRAM response.
- *
- * Bit fields:
- *  31-0:  Keep-warm buffer physical base address [35:4], must be 4K aligned
- */
-#define FH49_KW_MEM_ADDR_REG		     (FH49_MEM_LOWER_BOUND + 0x97C)
-
-
-/**
- * TFD Circular Buffers Base (CBBC) addresses
- *
- * 4965 has 16 base pointer registers, one for each of 16 host-DRAM-resident
- * circular buffers (CBs/queues) containing Transmit Frame Descriptors (TFDs)
- * (see struct il_tfd_frame).  These 16 pointer registers are offset by 0x04
- * bytes from one another.  Each TFD circular buffer in DRAM must be 256-byte
- * aligned (address bits 0-7 must be 0).
- *
- * Bit fields in each pointer register:
- *  27-0: TFD CB physical base address [35:8], must be 256-byte aligned
- */
-#define FH49_MEM_CBBC_LOWER_BOUND          (FH49_MEM_LOWER_BOUND + 0x9D0)
-#define FH49_MEM_CBBC_UPPER_BOUND          (FH49_MEM_LOWER_BOUND + 0xA10)
-
-/* Find TFD CB base pointer for given queue (range 0-15). */
-#define FH49_MEM_CBBC_QUEUE(x)  (FH49_MEM_CBBC_LOWER_BOUND + (x) * 0x4)
-
-
-/**
- * Rx SRAM Control and Status Registers (RSCSR)
- *
- * These registers provide handshake between driver and 4965 for the Rx queue
- * (this queue handles *all* command responses, notifications, Rx data, etc.
- * sent from 4965 uCode to host driver).  Unlike Tx, there is only one Rx
- * queue, and only one Rx DMA/FIFO channel.  Also unlike Tx, which can
- * concatenate up to 20 DRAM buffers to form a Tx frame, each Receive Buffer
- * Descriptor (RBD) points to only one Rx Buffer (RB); there is a 1:1
- * mapping between RBDs and RBs.
- *
- * Driver must allocate host DRAM memory for the following, and set the
- * physical address of each into 4965 registers:
- *
- * 1)  Receive Buffer Descriptor (RBD) circular buffer (CB), typically with 256
- *     entries (although any power of 2, up to 4096, is selectable by driver).
- *     Each entry (1 dword) points to a receive buffer (RB) of consistent size
- *     (typically 4K, although 8K or 16K are also selectable by driver).
- *     Driver sets up RB size and number of RBDs in the CB via Rx config
- *     register FH49_MEM_RCSR_CHNL0_CONFIG_REG.
- *
- *     Bit fields within one RBD:
- *     27-0:  Receive Buffer physical address bits [35:8], 256-byte aligned
- *
- *     Driver sets physical address [35:8] of base of RBD circular buffer
- *     into FH49_RSCSR_CHNL0_RBDCB_BASE_REG [27:0].
- *
- * 2)  Rx status buffer, 8 bytes, in which 4965 indicates which Rx Buffers
- *     (RBs) have been filled, via a "write pointer", actually the idx of
- *     the RB's corresponding RBD within the circular buffer.  Driver sets
- *     physical address [35:4] into FH49_RSCSR_CHNL0_STTS_WPTR_REG [31:0].
- *
- *     Bit fields in lower dword of Rx status buffer (upper dword not used
- *     by driver; see struct il4965_shared, val0):
- *     31-12:  Not used by driver
- *     11- 0:  Index of last filled Rx buffer descriptor
- *             (4965 writes, driver reads this value)
- *
- * As the driver prepares Receive Buffers (RBs) for 4965 to fill, driver must
- * enter pointers to these RBs into contiguous RBD circular buffer entries,
- * and update the 4965's "write" idx register,
- * FH49_RSCSR_CHNL0_RBDCB_WPTR_REG.
- *
- * This "write" idx corresponds to the *next* RBD that the driver will make
- * available, i.e. one RBD past the tail of the ready-to-fill RBDs within
- * the circular buffer.  This value should initially be 0 (before preparing any
- * RBs), should be 8 after preparing the first 8 RBs (for example), and must
- * wrap back to 0 at the end of the circular buffer (but don't wrap before
- * "read" idx has advanced past 1!  See below).
- * NOTE:  4965 EXPECTS THE WRITE IDX TO BE INCREMENTED IN MULTIPLES OF 8.
- *
- * As the 4965 fills RBs (referenced from contiguous RBDs within the circular
- * buffer), it updates the Rx status buffer in host DRAM, 2) described above,
- * to tell the driver the idx of the latest filled RBD.  The driver must
- * read this "read" idx from DRAM after receiving an Rx interrupt from 4965.
- *
- * The driver must also internally keep track of a third idx, which is the
- * next RBD to process.  When receiving an Rx interrupt, driver should process
- * all filled but unprocessed RBs up to, but not including, the RB
- * corresponding to the "read" idx.  For example, if "read" idx becomes "1",
- * driver may process the RB pointed to by RBD 0.  Depending on volume of
- * traffic, there may be many RBs to process.
- *
- * If read idx == write idx, 4965 thinks there is no room to put new data.
- * Due to this, the maximum number of filled RBs is 255, instead of 256.  To
- * be safe, make sure that there is a gap of at least 2 RBDs between "write"
- * and "read" idxes; that is, make sure that there are no more than 254
- * buffers waiting to be filled.
- */
-#define FH49_MEM_RSCSR_LOWER_BOUND	(FH49_MEM_LOWER_BOUND + 0xBC0)
-#define FH49_MEM_RSCSR_UPPER_BOUND	(FH49_MEM_LOWER_BOUND + 0xC00)
-#define FH49_MEM_RSCSR_CHNL0		(FH49_MEM_RSCSR_LOWER_BOUND)
-
-/**
- * Physical base address of 8-byte Rx Status buffer.
- * Bit fields:
- *  31-0: Rx status buffer physical base address [35:4], must 16-byte aligned.
- */
-#define FH49_RSCSR_CHNL0_STTS_WPTR_REG	(FH49_MEM_RSCSR_CHNL0)
-
-/**
- * Physical base address of Rx Buffer Descriptor Circular Buffer.
- * Bit fields:
- *  27-0:  RBD CD physical base address [35:8], must be 256-byte aligned.
- */
-#define FH49_RSCSR_CHNL0_RBDCB_BASE_REG	(FH49_MEM_RSCSR_CHNL0 + 0x004)
-
-/**
- * Rx write pointer (idx, really!).
- * Bit fields:
- *  11-0:  Index of driver's most recent prepared-to-be-filled RBD, + 1.
- *         NOTE:  For 256-entry circular buffer, use only bits [7:0].
- */
-#define FH49_RSCSR_CHNL0_RBDCB_WPTR_REG	(FH49_MEM_RSCSR_CHNL0 + 0x008)
-#define FH49_RSCSR_CHNL0_WPTR        (FH49_RSCSR_CHNL0_RBDCB_WPTR_REG)
-
-
-/**
- * Rx Config/Status Registers (RCSR)
- * Rx Config Reg for channel 0 (only channel used)
- *
- * Driver must initialize FH49_MEM_RCSR_CHNL0_CONFIG_REG as follows for
- * normal operation (see bit fields).
- *
- * Clearing FH49_MEM_RCSR_CHNL0_CONFIG_REG to 0 turns off Rx DMA.
- * Driver should poll FH49_MEM_RSSR_RX_STATUS_REG	for
- * FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (bit 24) before continuing.
- *
- * Bit fields:
- * 31-30: Rx DMA channel enable: '00' off/pause, '01' pause at end of frame,
- *        '10' operate normally
- * 29-24: reserved
- * 23-20: # RBDs in circular buffer = 2^value; use "8" for 256 RBDs (normal),
- *        min "5" for 32 RBDs, max "12" for 4096 RBDs.
- * 19-18: reserved
- * 17-16: size of each receive buffer; '00' 4K (normal), '01' 8K,
- *        '10' 12K, '11' 16K.
- * 15-14: reserved
- * 13-12: IRQ destination; '00' none, '01' host driver (normal operation)
- * 11- 4: timeout for closing Rx buffer and interrupting host (units 32 usec)
- *        typical value 0x10 (about 1/2 msec)
- *  3- 0: reserved
- */
-#define FH49_MEM_RCSR_LOWER_BOUND      (FH49_MEM_LOWER_BOUND + 0xC00)
-#define FH49_MEM_RCSR_UPPER_BOUND      (FH49_MEM_LOWER_BOUND + 0xCC0)
-#define FH49_MEM_RCSR_CHNL0            (FH49_MEM_RCSR_LOWER_BOUND)
-
-#define FH49_MEM_RCSR_CHNL0_CONFIG_REG	(FH49_MEM_RCSR_CHNL0)
-
-#define FH49_RCSR_CHNL0_RX_CONFIG_RB_TIMEOUT_MSK (0x00000FF0) /* bits 4-11 */
-#define FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_MSK   (0x00001000) /* bits 12 */
-#define FH49_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK (0x00008000) /* bit 15 */
-#define FH49_RCSR_CHNL0_RX_CONFIG_RB_SIZE_MSK   (0x00030000) /* bits 16-17 */
-#define FH49_RCSR_CHNL0_RX_CONFIG_RBDBC_SIZE_MSK (0x00F00000) /* bits 20-23 */
-#define FH49_RCSR_CHNL0_RX_CONFIG_DMA_CHNL_EN_MSK (0xC0000000) /* bits 30-31*/
-
-#define FH49_RCSR_RX_CONFIG_RBDCB_SIZE_POS	(20)
-#define FH49_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS	(4)
-#define RX_RB_TIMEOUT	(0x10)
-
-#define FH49_RCSR_RX_CONFIG_CHNL_EN_PAUSE_VAL         (0x00000000)
-#define FH49_RCSR_RX_CONFIG_CHNL_EN_PAUSE_EOF_VAL     (0x40000000)
-#define FH49_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL        (0x80000000)
-
-#define FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K    (0x00000000)
-#define FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K    (0x00010000)
-#define FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_12K   (0x00020000)
-#define FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_16K   (0x00030000)
-
-#define FH49_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY              (0x00000004)
-#define FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL    (0x00000000)
-#define FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL  (0x00001000)
-
-/**
- * Rx Shared Status Registers (RSSR)
- *
- * After stopping Rx DMA channel (writing 0 to
- * FH49_MEM_RCSR_CHNL0_CONFIG_REG), driver must poll
- * FH49_MEM_RSSR_RX_STATUS_REG until Rx channel is idle.
- *
- * Bit fields:
- *  24:  1 = Channel 0 is idle
- *
- * FH49_MEM_RSSR_SHARED_CTRL_REG and FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV
- * contain default values that should not be altered by the driver.
- */
-#define FH49_MEM_RSSR_LOWER_BOUND           (FH49_MEM_LOWER_BOUND + 0xC40)
-#define FH49_MEM_RSSR_UPPER_BOUND           (FH49_MEM_LOWER_BOUND + 0xD00)
-
-#define FH49_MEM_RSSR_SHARED_CTRL_REG       (FH49_MEM_RSSR_LOWER_BOUND)
-#define FH49_MEM_RSSR_RX_STATUS_REG	(FH49_MEM_RSSR_LOWER_BOUND + 0x004)
-#define FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV\
-					(FH49_MEM_RSSR_LOWER_BOUND + 0x008)
-
-#define FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE	(0x01000000)
-
-#define FH49_MEM_TFDIB_REG1_ADDR_BITSHIFT	28
-
-/* TFDB  Area - TFDs buffer table */
-#define FH49_MEM_TFDIB_DRAM_ADDR_LSB_MSK      (0xFFFFFFFF)
-#define FH49_TFDIB_LOWER_BOUND       (FH49_MEM_LOWER_BOUND + 0x900)
-#define FH49_TFDIB_UPPER_BOUND       (FH49_MEM_LOWER_BOUND + 0x958)
-#define FH49_TFDIB_CTRL0_REG(_chnl)  (FH49_TFDIB_LOWER_BOUND + 0x8 * (_chnl))
-#define FH49_TFDIB_CTRL1_REG(_chnl)  (FH49_TFDIB_LOWER_BOUND + 0x8 * (_chnl) + 0x4)
-
-/**
- * Transmit DMA Channel Control/Status Registers (TCSR)
- *
- * 4965 has one configuration register for each of 8 Tx DMA/FIFO channels
- * supported in hardware (don't confuse these with the 16 Tx queues in DRAM,
- * which feed the DMA/FIFO channels); config regs are separated by 0x20 bytes.
- *
- * To use a Tx DMA channel, driver must initialize its
- * FH49_TCSR_CHNL_TX_CONFIG_REG(chnl) with:
- *
- * FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
- * FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL
- *
- * All other bits should be 0.
- *
- * Bit fields:
- * 31-30: Tx DMA channel enable: '00' off/pause, '01' pause at end of frame,
- *        '10' operate normally
- * 29- 4: Reserved, set to "0"
- *     3: Enable internal DMA requests (1, normal operation), disable (0)
- *  2- 0: Reserved, set to "0"
- */
-#define FH49_TCSR_LOWER_BOUND  (FH49_MEM_LOWER_BOUND + 0xD00)
-#define FH49_TCSR_UPPER_BOUND  (FH49_MEM_LOWER_BOUND + 0xE60)
-
-/* Find Control/Status reg for given Tx DMA/FIFO channel */
-#define FH49_TCSR_CHNL_NUM                            (7)
-#define FH50_TCSR_CHNL_NUM                            (8)
-
-/* TCSR: tx_config register values */
-#define FH49_TCSR_CHNL_TX_CONFIG_REG(_chnl)	\
-		(FH49_TCSR_LOWER_BOUND + 0x20 * (_chnl))
-#define FH49_TCSR_CHNL_TX_CREDIT_REG(_chnl)	\
-		(FH49_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x4)
-#define FH49_TCSR_CHNL_TX_BUF_STS_REG(_chnl)	\
-		(FH49_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x8)
-
-#define FH49_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF		(0x00000000)
-#define FH49_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_DRV		(0x00000001)
-
-#define FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE	(0x00000000)
-#define FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE	(0x00000008)
-
-#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_NOINT	(0x00000000)
-#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD	(0x00100000)
-#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD	(0x00200000)
-
-#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT	(0x00000000)
-#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_ENDTFD	(0x00400000)
-#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_IFTFD	(0x00800000)
-
-#define FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE	(0x00000000)
-#define FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE_EOF	(0x40000000)
-#define FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE	(0x80000000)
-
-#define FH49_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_EMPTY	(0x00000000)
-#define FH49_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_WAIT	(0x00002000)
-#define FH49_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID	(0x00000003)
-
-#define FH49_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM		(20)
-#define FH49_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_IDX		(12)
-
-/**
- * Tx Shared Status Registers (TSSR)
- *
- * After stopping Tx DMA channel (writing 0 to
- * FH49_TCSR_CHNL_TX_CONFIG_REG(chnl)), driver must poll
- * FH49_TSSR_TX_STATUS_REG until selected Tx channel is idle
- * (channel's buffers empty | no pending requests).
- *
- * Bit fields:
- * 31-24:  1 = Channel buffers empty (channel 7:0)
- * 23-16:  1 = No pending requests (channel 7:0)
- */
-#define FH49_TSSR_LOWER_BOUND		(FH49_MEM_LOWER_BOUND + 0xEA0)
-#define FH49_TSSR_UPPER_BOUND		(FH49_MEM_LOWER_BOUND + 0xEC0)
-
-#define FH49_TSSR_TX_STATUS_REG		(FH49_TSSR_LOWER_BOUND + 0x010)
-
-/**
- * Bit fields for TSSR(Tx Shared Status & Control) error status register:
- * 31:  Indicates an address error when accessed to internal memory
- *	uCode/driver must write "1" in order to clear this flag
- * 30:  Indicates that Host did not send the expected number of dwords to FH
- *	uCode/driver must write "1" in order to clear this flag
- * 16-9:Each status bit is for one channel. Indicates that an (Error) ActDMA
- *	command was received from the scheduler while the TRB was already full
- *	with previous command
- *	uCode/driver must write "1" in order to clear this flag
- * 7-0: Each status bit indicates a channel's TxCredit error. When an error
- *	bit is set, it indicates that the FH has received a full indication
- *	from the RTC TxFIFO and the current value of the TxCredit counter was
- *	not equal to zero. This mean that the credit mechanism was not
- *	synchronized to the TxFIFO status
- *	uCode/driver must write "1" in order to clear this flag
- */
-#define FH49_TSSR_TX_ERROR_REG		(FH49_TSSR_LOWER_BOUND + 0x018)
-
-#define FH49_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_chnl) ((1 << (_chnl)) << 16)
-
-/* Tx service channels */
-#define FH49_SRVC_CHNL		(9)
-#define FH49_SRVC_LOWER_BOUND	(FH49_MEM_LOWER_BOUND + 0x9C8)
-#define FH49_SRVC_UPPER_BOUND	(FH49_MEM_LOWER_BOUND + 0x9D0)
-#define FH49_SRVC_CHNL_SRAM_ADDR_REG(_chnl) \
-		(FH49_SRVC_LOWER_BOUND + ((_chnl) - 9) * 0x4)
-
-#define FH49_TX_CHICKEN_BITS_REG	(FH49_MEM_LOWER_BOUND + 0xE98)
-/* Instruct FH to increment the retry count of a packet when
- * it is brought from the memory to TX-FIFO
- */
-#define FH49_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN	(0x00000002)
-
-/* Keep Warm Size */
-#define IL_KW_SIZE 0x1000	/* 4k */
-
-#endif /* !__il_fh_h__ */