orinoco: Move sources to a subdirectory

Keeping all the orinoco drivers in a common directory will make
maintenance easier.

Signed-off by: David Kilroy <kilroyd@googlemail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 0 insertions, 544 deletions

diff --git a/drivers/net/wireless/hermes.c b/drivers/net/wireless/hermes.c
deleted file mode 100644
index bfa375369df..00000000000
--- a/drivers/net/wireless/hermes.c
+++ /dev/null
@@ -1,544 +0,0 @@
-/* hermes.c
- *
- * Driver core for the "Hermes" wireless MAC controller, as used in
- * the Lucent Orinoco and Cabletron RoamAbout cards. It should also
- * work on the hfa3841 and hfa3842 MAC controller chips used in the
- * Prism II chipsets.
- *
- * This is not a complete driver, just low-level access routines for
- * the MAC controller itself.
- *
- * Based on the prism2 driver from Absolute Value Systems' linux-wlan
- * project, the Linux wvlan_cs driver, Lucent's HCF-Light
- * (wvlan_hcf.c) library, and the NetBSD wireless driver (in no
- * particular order).
- *
- * Copyright (C) 2000, David Gibson, Linuxcare Australia.
- * (C) Copyright David Gibson, IBM Corp. 2001-2003.
- * 
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-
-#include "hermes.h"
-
-MODULE_DESCRIPTION("Low-level driver helper for Lucent Hermes chipset and Prism II HFA384x wireless MAC controller");
-MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>"
-	" & David Gibson <hermes@gibson.dropbear.id.au>");
-MODULE_LICENSE("Dual MPL/GPL");
-
-/* These are maximum timeouts. Most often, card wil react much faster */
-#define CMD_BUSY_TIMEOUT (100) /* In iterations of ~1us */
-#define CMD_INIT_TIMEOUT (50000) /* in iterations of ~10us */
-#define CMD_COMPL_TIMEOUT (20000) /* in iterations of ~10us */
-#define ALLOC_COMPL_TIMEOUT (1000) /* in iterations of ~10us */
-
-/*
- * Debugging helpers
- */
-
-#define DMSG(stuff...) do {printk(KERN_DEBUG "hermes @ %p: " , hw->iobase); \
-			printk(stuff);} while (0)
-
-#undef HERMES_DEBUG
-#ifdef HERMES_DEBUG
-#include <stdarg.h>
-
-#define DEBUG(lvl, stuff...) if ( (lvl) <= HERMES_DEBUG) DMSG(stuff)
-
-#else /* ! HERMES_DEBUG */
-
-#define DEBUG(lvl, stuff...) do { } while (0)
-
-#endif /* ! HERMES_DEBUG */
-
-
-/*
- * Internal functions
- */
-
-/* Issue a command to the chip. Waiting for it to complete is the caller's
-   problem.
-
-   Returns -EBUSY if the command register is busy, 0 on success.
-
-   Callable from any context.
-*/
-static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0,
-			    u16 param1, u16 param2)
-{
-	int k = CMD_BUSY_TIMEOUT;
-	u16 reg;
-
-	/* First wait for the command register to unbusy */
-	reg = hermes_read_regn(hw, CMD);
-	while ( (reg & HERMES_CMD_BUSY) && k ) {
-		k--;
-		udelay(1);
-		reg = hermes_read_regn(hw, CMD);
-	}
-	if (reg & HERMES_CMD_BUSY) {
-		return -EBUSY;
-	}
-
-	hermes_write_regn(hw, PARAM2, param2);
-	hermes_write_regn(hw, PARAM1, param1);
-	hermes_write_regn(hw, PARAM0, param0);
-	hermes_write_regn(hw, CMD, cmd);
-	
-	return 0;
-}
-
-/*
- * Function definitions
- */
-
-/* For doing cmds that wipe the magic constant in SWSUPPORT0 */
-int hermes_doicmd_wait(hermes_t *hw, u16 cmd,
-		       u16 parm0, u16 parm1, u16 parm2,
-		       struct hermes_response *resp)
-{
-	int err = 0;
-	int k;
-	u16 status, reg;
-
-	err = hermes_issue_cmd(hw, cmd, parm0, parm1, parm2);
-	if (err)
-		return err;
-
-	reg = hermes_read_regn(hw, EVSTAT);
-	k = CMD_INIT_TIMEOUT;
-	while ((!(reg & HERMES_EV_CMD)) && k) {
-		k--;
-		udelay(10);
-		reg = hermes_read_regn(hw, EVSTAT);
-	}
-
-	hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC);
-
-	if (!hermes_present(hw)) {
-		DEBUG(0, "hermes @ 0x%x: Card removed during reset.\n",
-		       hw->iobase);
-		err = -ENODEV;
-		goto out;
-	}
-
-	if (!(reg & HERMES_EV_CMD)) {
-		printk(KERN_ERR "hermes @ %p: "
-		       "Timeout waiting for card to reset (reg=0x%04x)!\n",
-		       hw->iobase, reg);
-		err = -ETIMEDOUT;
-		goto out;
-	}
-
-	status = hermes_read_regn(hw, STATUS);
-	if (resp) {
-		resp->status = status;
-		resp->resp0 = hermes_read_regn(hw, RESP0);
-		resp->resp1 = hermes_read_regn(hw, RESP1);
-		resp->resp2 = hermes_read_regn(hw, RESP2);
-	}
-
-	hermes_write_regn(hw, EVACK, HERMES_EV_CMD);
-
-	if (status & HERMES_STATUS_RESULT)
-		err = -EIO;
-out:
-	return err;
-}
-EXPORT_SYMBOL(hermes_doicmd_wait);
-
-void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing)
-{
-	hw->iobase = address;
-	hw->reg_spacing = reg_spacing;
-	hw->inten = 0x0;
-}
-EXPORT_SYMBOL(hermes_struct_init);
-
-int hermes_init(hermes_t *hw)
-{
-	u16 reg;
-	int err = 0;
-	int k;
-
-	/* We don't want to be interrupted while resetting the chipset */
-	hw->inten = 0x0;
-	hermes_write_regn(hw, INTEN, 0);
-	hermes_write_regn(hw, EVACK, 0xffff);
-
-	/* Normally it's a "can't happen" for the command register to
-           be busy when we go to issue a command because we are
-           serializing all commands.  However we want to have some
-           chance of resetting the card even if it gets into a stupid
-           state, so we actually wait to see if the command register
-           will unbusy itself here. */
-	k = CMD_BUSY_TIMEOUT;
-	reg = hermes_read_regn(hw, CMD);
-	while (k && (reg & HERMES_CMD_BUSY)) {
-		if (reg == 0xffff) /* Special case - the card has probably been removed,
-				      so don't wait for the timeout */
-			return -ENODEV;
-
-		k--;
-		udelay(1);
-		reg = hermes_read_regn(hw, CMD);
-	}
-	
-	/* No need to explicitly handle the timeout - if we've timed
-	   out hermes_issue_cmd() will probably return -EBUSY below */
-
-	/* According to the documentation, EVSTAT may contain
-	   obsolete event occurrence information.  We have to acknowledge
-	   it by writing EVACK. */
-	reg = hermes_read_regn(hw, EVSTAT);
-	hermes_write_regn(hw, EVACK, reg);
-
-	/* We don't use hermes_docmd_wait here, because the reset wipes
-	   the magic constant in SWSUPPORT0 away, and it gets confused */
-	err = hermes_doicmd_wait(hw, HERMES_CMD_INIT, 0, 0, 0, NULL);
-
-	return err;
-}
-EXPORT_SYMBOL(hermes_init);
-
-/* Issue a command to the chip, and (busy!) wait for it to
- * complete.
- *
- * Returns: < 0 on internal error, 0 on success, > 0 on error returned by the firmware
- *
- * Callable from any context, but locking is your problem. */
-int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
-		      struct hermes_response *resp)
-{
-	int err;
-	int k;
-	u16 reg;
-	u16 status;
-
-	err = hermes_issue_cmd(hw, cmd, parm0, 0, 0);
-	if (err) {
-		if (! hermes_present(hw)) {
-			if (net_ratelimit())
-				printk(KERN_WARNING "hermes @ %p: "
-				       "Card removed while issuing command "
-				       "0x%04x.\n", hw->iobase, cmd);
-			err = -ENODEV;
-		} else 
-			if (net_ratelimit())
-				printk(KERN_ERR "hermes @ %p: "
-				       "Error %d issuing command 0x%04x.\n",
-				       hw->iobase, err, cmd);
-		goto out;
-	}
-
-	reg = hermes_read_regn(hw, EVSTAT);
-	k = CMD_COMPL_TIMEOUT;
-	while ( (! (reg & HERMES_EV_CMD)) && k) {
-		k--;
-		udelay(10);
-		reg = hermes_read_regn(hw, EVSTAT);
-	}
-
-	if (! hermes_present(hw)) {
-		printk(KERN_WARNING "hermes @ %p: Card removed "
-		       "while waiting for command 0x%04x completion.\n",
-		       hw->iobase, cmd);
-		err = -ENODEV;
-		goto out;
-	}
-		
-	if (! (reg & HERMES_EV_CMD)) {
-		printk(KERN_ERR "hermes @ %p: Timeout waiting for "
-		       "command 0x%04x completion.\n", hw->iobase, cmd);
-		err = -ETIMEDOUT;
-		goto out;
-	}
-
-	status = hermes_read_regn(hw, STATUS);
-	if (resp) {
-		resp->status = status;
-		resp->resp0 = hermes_read_regn(hw, RESP0);
-		resp->resp1 = hermes_read_regn(hw, RESP1);
-		resp->resp2 = hermes_read_regn(hw, RESP2);
-	}
-
-	hermes_write_regn(hw, EVACK, HERMES_EV_CMD);
-
-	if (status & HERMES_STATUS_RESULT)
-		err = -EIO;
-
- out:
-	return err;
-}
-EXPORT_SYMBOL(hermes_docmd_wait);
-
-int hermes_allocate(hermes_t *hw, u16 size, u16 *fid)
-{
-	int err = 0;
-	int k;
-	u16 reg;
-	
-	if ( (size < HERMES_ALLOC_LEN_MIN) || (size > HERMES_ALLOC_LEN_MAX) )
-		return -EINVAL;
-
-	err = hermes_docmd_wait(hw, HERMES_CMD_ALLOC, size, NULL);
-	if (err) {
-		return err;
-	}
-
-	reg = hermes_read_regn(hw, EVSTAT);
-	k = ALLOC_COMPL_TIMEOUT;
-	while ( (! (reg & HERMES_EV_ALLOC)) && k) {
-		k--;
-		udelay(10);
-		reg = hermes_read_regn(hw, EVSTAT);
-	}
-	
-	if (! hermes_present(hw)) {
-		printk(KERN_WARNING "hermes @ %p: "
-		       "Card removed waiting for frame allocation.\n",
-		       hw->iobase);
-		return -ENODEV;
-	}
-		
-	if (! (reg & HERMES_EV_ALLOC)) {
-		printk(KERN_ERR "hermes @ %p: "
-		       "Timeout waiting for frame allocation\n",
-		       hw->iobase);
-		return -ETIMEDOUT;
-	}
-
-	*fid = hermes_read_regn(hw, ALLOCFID);
-	hermes_write_regn(hw, EVACK, HERMES_EV_ALLOC);
-	
-	return 0;
-}
-EXPORT_SYMBOL(hermes_allocate);
-
-/* Set up a BAP to read a particular chunk of data from card's internal buffer.
- *
- * Returns: < 0 on internal failure (errno), 0 on success, >0 on error
- * from firmware
- *
- * Callable from any context */
-static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset)
-{
-	int sreg = bap ? HERMES_SELECT1 : HERMES_SELECT0;
-	int oreg = bap ? HERMES_OFFSET1 : HERMES_OFFSET0;
-	int k;
-	u16 reg;
-
-	/* Paranoia.. */
-	if ( (offset > HERMES_BAP_OFFSET_MAX) || (offset % 2) )
-		return -EINVAL;
-
-	k = HERMES_BAP_BUSY_TIMEOUT;
-	reg = hermes_read_reg(hw, oreg);
-	while ((reg & HERMES_OFFSET_BUSY) && k) {
-		k--;
-		udelay(1);
-		reg = hermes_read_reg(hw, oreg);
-	}
-
-	if (reg & HERMES_OFFSET_BUSY)
-		return -ETIMEDOUT;
-
-	/* Now we actually set up the transfer */
-	hermes_write_reg(hw, sreg, id);
-	hermes_write_reg(hw, oreg, offset);
-
-	/* Wait for the BAP to be ready */
-	k = HERMES_BAP_BUSY_TIMEOUT;
-	reg = hermes_read_reg(hw, oreg);
-	while ( (reg & (HERMES_OFFSET_BUSY | HERMES_OFFSET_ERR)) && k) {
-		k--;
-		udelay(1);
-		reg = hermes_read_reg(hw, oreg);
-	}
-
-	if (reg != offset) {
-		printk(KERN_ERR "hermes @ %p: BAP%d offset %s: "
-		       "reg=0x%x id=0x%x offset=0x%x\n", hw->iobase, bap,
-		       (reg & HERMES_OFFSET_BUSY) ? "timeout" : "error",
-		       reg, id, offset);
-
-		if (reg & HERMES_OFFSET_BUSY) {
-			return -ETIMEDOUT;
-		}
-
-		return -EIO;		/* error or wrong offset */
-	}
-
-	return 0;
-}
-
-/* Read a block of data from the chip's buffer, via the
- * BAP. Synchronization/serialization is the caller's problem.  len
- * must be even.
- *
- * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
- */
-int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
-		     u16 id, u16 offset)
-{
-	int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
-	int err = 0;
-
-	if ( (len < 0) || (len % 2) )
-		return -EINVAL;
-
-	err = hermes_bap_seek(hw, bap, id, offset);
-	if (err)
-		goto out;
-
-	/* Actually do the transfer */
-	hermes_read_words(hw, dreg, buf, len/2);
-
- out:
-	return err;
-}
-EXPORT_SYMBOL(hermes_bap_pread);
-
-/* Write a block of data to the chip's buffer, via the
- * BAP. Synchronization/serialization is the caller's problem.
- *
- * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
- */
-int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
-		      u16 id, u16 offset)
-{
-	int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
-	int err = 0;
-
-	if (len < 0)
-		return -EINVAL;
-
-	err = hermes_bap_seek(hw, bap, id, offset);
-	if (err)
-		goto out;
-	
-	/* Actually do the transfer */
-	hermes_write_bytes(hw, dreg, buf, len);
-
- out:	
-	return err;
-}
-EXPORT_SYMBOL(hermes_bap_pwrite);
-
-/* Read a Length-Type-Value record from the card.
- *
- * If length is NULL, we ignore the length read from the card, and
- * read the entire buffer regardless. This is useful because some of
- * the configuration records appear to have incorrect lengths in
- * practice.
- *
- * Callable from user or bh context.  */
-int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize,
-		    u16 *length, void *buf)
-{
-	int err = 0;
-	int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
-	u16 rlength, rtype;
-	unsigned nwords;
-
-	if ( (bufsize < 0) || (bufsize % 2) )
-		return -EINVAL;
-
-	err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS, rid, NULL);
-	if (err)
-		return err;
-
-	err = hermes_bap_seek(hw, bap, rid, 0);
-	if (err)
-		return err;
-
-	rlength = hermes_read_reg(hw, dreg);
-
-	if (! rlength)
-		return -ENODATA;
-
-	rtype = hermes_read_reg(hw, dreg);
-
-	if (length)
-		*length = rlength;
-
-	if (rtype != rid)
-		printk(KERN_WARNING "hermes @ %p: %s(): "
-		       "rid (0x%04x) does not match type (0x%04x)\n",
-		       hw->iobase, __func__, rid, rtype);
-	if (HERMES_RECLEN_TO_BYTES(rlength) > bufsize)
-		printk(KERN_WARNING "hermes @ %p: "
-		       "Truncating LTV record from %d to %d bytes. "
-		       "(rid=0x%04x, len=0x%04x)\n", hw->iobase,
-		       HERMES_RECLEN_TO_BYTES(rlength), bufsize, rid, rlength);
-
-	nwords = min((unsigned)rlength - 1, bufsize / 2);
-	hermes_read_words(hw, dreg, buf, nwords);
-
-	return 0;
-}
-EXPORT_SYMBOL(hermes_read_ltv);
-
-int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, 
-		     u16 length, const void *value)
-{
-	int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
-	int err = 0;
-	unsigned count;
-
-	if (length == 0)
-		return -EINVAL;
-
-	err = hermes_bap_seek(hw, bap, rid, 0);
-	if (err)
-		return err;
-
-	hermes_write_reg(hw, dreg, length);
-	hermes_write_reg(hw, dreg, rid);
-
-	count = length - 1;
-
-	hermes_write_bytes(hw, dreg, value, count << 1);
-
-	err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS | HERMES_CMD_WRITE,
-				rid, NULL);
-
-	return err;
-}
-EXPORT_SYMBOL(hermes_write_ltv);
-
-static int __init init_hermes(void)
-{
-	return 0;
-}
-
-static void __exit exit_hermes(void)
-{
-}
-
-module_init(init_hermes);
-module_exit(exit_hermes);