Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1958 commits)
  net: pack skb_shared_info more efficiently
  net_sched: red: split red_parms into parms and vars
  net_sched: sfq: extend limits
  cnic: Improve error recovery on bnx2x devices
  cnic: Re-init dev->stats_addr after chip reset
  net_sched: Bug in netem reordering
  bna: fix sparse warnings/errors
  bna: make ethtool_ops and strings const
  xgmac: cleanups
  net: make ethtool_ops const
  vmxnet3" make ethtool ops const
  xen-netback: make ops structs const
  virtio_net: Pass gfp flags when allocating rx buffers.
  ixgbe: FCoE: Add support for ndo_get_fcoe_hbainfo() call
  netdev: FCoE: Add new ndo_get_fcoe_hbainfo() call
  igb: reset PHY after recovering from PHY power down
  igb: add basic runtime PM support
  igb: Add support for byte queue limits.
  e1000: cleanup CE4100 MDIO registers access
  e1000: unmap ce4100_gbe_mdio_base_virt in e1000_remove
  ...

1 files changed, 134 insertions, 194 deletions

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
index 0d8a9cdf897..d106576ce33 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
@@ -17,11 +17,11 @@
 #define __UNDEF_NO_VERSION__
 
 #include <linux/etherdevice.h>
-#include <linux/pci.h>
 #include <linux/sched.h>
 #include <linux/firmware.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/bcma/bcma.h>
 #include <net/mac80211.h>
 #include <defs.h>
 #include "nicpci.h"
@@ -40,10 +40,10 @@
 #define MAC_FILTERS (FIF_PROMISC_IN_BSS | \
 	FIF_ALLMULTI | \
 	FIF_FCSFAIL | \
-	FIF_PLCPFAIL | \
 	FIF_CONTROL | \
 	FIF_OTHER_BSS | \
-	FIF_BCN_PRBRESP_PROMISC)
+	FIF_BCN_PRBRESP_PROMISC | \
+	FIF_PSPOLL)
 
 #define CHAN2GHZ(channel, freqency, chflags)  { \
 	.band = IEEE80211_BAND_2GHZ, \
@@ -87,16 +87,14 @@ MODULE_DESCRIPTION("Broadcom 802.11n wireless LAN driver.");
 MODULE_SUPPORTED_DEVICE("Broadcom 802.11n WLAN cards");
 MODULE_LICENSE("Dual BSD/GPL");
 
-/* recognized PCI IDs */
-static DEFINE_PCI_DEVICE_TABLE(brcms_pci_id_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) }, /* 43225 2G */
-	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) }, /* 43224 DUAL */
-	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, /* 4313 DUAL */
-	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) }, /* 43224 Ven */
-	{0}
-};
 
-MODULE_DEVICE_TABLE(pci, brcms_pci_id_table);
+/* recognized BCMA Core IDs */
+static struct bcma_device_id brcms_coreid_table[] = {
+	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 23, BCMA_ANY_CLASS),
+	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 24, BCMA_ANY_CLASS),
+	BCMA_CORETABLE_END
+};
+MODULE_DEVICE_TABLE(bcma, brcms_coreid_table);
 
 #ifdef BCMDBG
 static int msglevel = 0xdeadbeef;
@@ -216,8 +214,7 @@ static const struct ieee80211_supported_band brcms_band_2GHz_nphy_template = {
 	.ht_cap = {
 		   /* from include/linux/ieee80211.h */
 		   .cap = IEEE80211_HT_CAP_GRN_FLD |
-		   IEEE80211_HT_CAP_SGI_20 |
-		   IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_40MHZ_INTOLERANT,
+			  IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40,
 		   .ht_supported = true,
 		   .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
 		   .ampdu_density = AMPDU_DEF_MPDU_DENSITY,
@@ -238,8 +235,7 @@ static const struct ieee80211_supported_band brcms_band_5GHz_nphy_template = {
 			BRCMS_LEGACY_5G_RATE_OFFSET,
 	.ht_cap = {
 		   .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 |
-			  IEEE80211_HT_CAP_SGI_40 |
-			  IEEE80211_HT_CAP_40MHZ_INTOLERANT, /* No 40 mhz yet */
+			  IEEE80211_HT_CAP_SGI_40,
 		   .ht_supported = true,
 		   .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
 		   .ampdu_density = AMPDU_DEF_MPDU_DENSITY,
@@ -287,6 +283,7 @@ static int brcms_ops_start(struct ieee80211_hw *hw)
 {
 	struct brcms_info *wl = hw->priv;
 	bool blocked;
+	int err;
 
 	ieee80211_wake_queues(hw);
 	spin_lock_bh(&wl->lock);
@@ -295,57 +292,69 @@ static int brcms_ops_start(struct ieee80211_hw *hw)
 	if (!blocked)
 		wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy);
 
-	return 0;
+	spin_lock_bh(&wl->lock);
+	/* avoid acknowledging frames before a non-monitor device is added */
+	wl->mute_tx = true;
+
+	if (!wl->pub->up)
+		err = brcms_up(wl);
+	else
+		err = -ENODEV;
+	spin_unlock_bh(&wl->lock);
+
+	if (err != 0)
+		wiphy_err(hw->wiphy, "%s: brcms_up() returned %d\n", __func__,
+			  err);
+	return err;
 }
 
 static void brcms_ops_stop(struct ieee80211_hw *hw)
 {
+	struct brcms_info *wl = hw->priv;
+	int status;
+
 	ieee80211_stop_queues(hw);
+
+	if (wl->wlc == NULL)
+		return;
+
+	spin_lock_bh(&wl->lock);
+	status = brcms_c_chipmatch(wl->wlc->hw->vendorid,
+				   wl->wlc->hw->deviceid);
+	spin_unlock_bh(&wl->lock);
+	if (!status) {
+		wiphy_err(wl->wiphy,
+			  "wl: brcms_ops_stop: chipmatch failed\n");
+		return;
+	}
+
+	/* put driver in down state */
+	spin_lock_bh(&wl->lock);
+	brcms_down(wl);
+	spin_unlock_bh(&wl->lock);
 }
 
 static int
 brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 {
-	struct brcms_info *wl;
-	int err;
+	struct brcms_info *wl = hw->priv;
 
 	/* Just STA for now */
-	if (vif->type != NL80211_IFTYPE_AP &&
-	    vif->type != NL80211_IFTYPE_MESH_POINT &&
-	    vif->type != NL80211_IFTYPE_STATION &&
-	    vif->type != NL80211_IFTYPE_WDS &&
-	    vif->type != NL80211_IFTYPE_ADHOC) {
+	if (vif->type != NL80211_IFTYPE_STATION) {
 		wiphy_err(hw->wiphy, "%s: Attempt to add type %d, only"
 			  " STA for now\n", __func__, vif->type);
 		return -EOPNOTSUPP;
 	}
 
-	wl = hw->priv;
-	spin_lock_bh(&wl->lock);
-	if (!wl->pub->up)
-		err = brcms_up(wl);
-	else
-		err = -ENODEV;
-	spin_unlock_bh(&wl->lock);
+	wl->mute_tx = false;
+	brcms_c_mute(wl->wlc, false);
 
-	if (err != 0)
-		wiphy_err(hw->wiphy, "%s: brcms_up() returned %d\n", __func__,
-			  err);
-
-	return err;
+	return 0;
 }
 
 static void
 brcms_ops_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 {
-	struct brcms_info *wl;
-
-	wl = hw->priv;
-
-	/* put driver in down state */
-	spin_lock_bh(&wl->lock);
-	brcms_down(wl);
-	spin_unlock_bh(&wl->lock);
 }
 
 static int brcms_ops_config(struct ieee80211_hw *hw, u32 changed)
@@ -362,7 +371,7 @@ static int brcms_ops_config(struct ieee80211_hw *hw, u32 changed)
 						   conf->listen_interval);
 	}
 	if (changed & IEEE80211_CONF_CHANGE_MONITOR)
-		wiphy_err(wiphy, "%s: change monitor mode: %s (implement)\n",
+		wiphy_dbg(wiphy, "%s: change monitor mode: %s\n",
 			  __func__, conf->flags & IEEE80211_CONF_MONITOR ?
 			  "true" : "false");
 	if (changed & IEEE80211_CONF_CHANGE_PS)
@@ -539,29 +548,25 @@ brcms_ops_configure_filter(struct ieee80211_hw *hw,
 
 	changed_flags &= MAC_FILTERS;
 	*total_flags &= MAC_FILTERS;
+
 	if (changed_flags & FIF_PROMISC_IN_BSS)
-		wiphy_err(wiphy, "FIF_PROMISC_IN_BSS\n");
+		wiphy_dbg(wiphy, "FIF_PROMISC_IN_BSS\n");
 	if (changed_flags & FIF_ALLMULTI)
-		wiphy_err(wiphy, "FIF_ALLMULTI\n");
+		wiphy_dbg(wiphy, "FIF_ALLMULTI\n");
 	if (changed_flags & FIF_FCSFAIL)
-		wiphy_err(wiphy, "FIF_FCSFAIL\n");
-	if (changed_flags & FIF_PLCPFAIL)
-		wiphy_err(wiphy, "FIF_PLCPFAIL\n");
+		wiphy_dbg(wiphy, "FIF_FCSFAIL\n");
 	if (changed_flags & FIF_CONTROL)
-		wiphy_err(wiphy, "FIF_CONTROL\n");
+		wiphy_dbg(wiphy, "FIF_CONTROL\n");
 	if (changed_flags & FIF_OTHER_BSS)
-		wiphy_err(wiphy, "FIF_OTHER_BSS\n");
-	if (changed_flags & FIF_BCN_PRBRESP_PROMISC) {
-		spin_lock_bh(&wl->lock);
-		if (*total_flags & FIF_BCN_PRBRESP_PROMISC) {
-			wl->pub->mac80211_state |= MAC80211_PROMISC_BCNS;
-			brcms_c_mac_bcn_promisc_change(wl->wlc, 1);
-		} else {
-			brcms_c_mac_bcn_promisc_change(wl->wlc, 0);
-			wl->pub->mac80211_state &= ~MAC80211_PROMISC_BCNS;
-		}
-		spin_unlock_bh(&wl->lock);
-	}
+		wiphy_dbg(wiphy, "FIF_OTHER_BSS\n");
+	if (changed_flags & FIF_PSPOLL)
+		wiphy_dbg(wiphy, "FIF_PSPOLL\n");
+	if (changed_flags & FIF_BCN_PRBRESP_PROMISC)
+		wiphy_dbg(wiphy, "FIF_BCN_PRBRESP_PROMISC\n");
+
+	spin_lock_bh(&wl->lock);
+	brcms_c_mac_promisc(wl->wlc, *total_flags);
+	spin_unlock_bh(&wl->lock);
 	return;
 }
 
@@ -609,13 +614,6 @@ brcms_ops_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	wl->pub->global_ampdu->scb = scb;
 	wl->pub->global_ampdu->max_pdu = 16;
 
-	sta->ht_cap.ht_supported = true;
-	sta->ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
-	sta->ht_cap.ampdu_density = AMPDU_DEF_MPDU_DENSITY;
-	sta->ht_cap.cap = IEEE80211_HT_CAP_GRN_FLD |
-	    IEEE80211_HT_CAP_SGI_20 |
-	    IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_40MHZ_INTOLERANT;
-
 	/*
 	 * minstrel_ht initiates addBA on our behalf by calling
 	 * ieee80211_start_tx_ba_session()
@@ -724,7 +722,7 @@ static const struct ieee80211_ops brcms_ops = {
 };
 
 /*
- * is called in brcms_pci_probe() context, therefore no locking required.
+ * is called in brcms_bcma_probe() context, therefore no locking required.
  */
 static int brcms_set_hint(struct brcms_info *wl, char *abbrev)
 {
@@ -864,56 +862,26 @@ static void brcms_free(struct brcms_info *wl)
 #endif
 		kfree(t);
 	}
-
-	/*
-	 * unregister_netdev() calls get_stats() which may read chip
-	 * registers so we cannot unmap the chip registers until
-	 * after calling unregister_netdev() .
-	 */
-	if (wl->regsva)
-		iounmap(wl->regsva);
-
-	wl->regsva = NULL;
 }
 
 /*
-* called from both kernel as from this kernel module.
+* called from both kernel as from this kernel module (error flow on attach)
 * precondition: perimeter lock is not acquired.
 */
-static void brcms_remove(struct pci_dev *pdev)
+static void brcms_remove(struct bcma_device *pdev)
 {
-	struct brcms_info *wl;
-	struct ieee80211_hw *hw;
-	int status;
-
-	hw = pci_get_drvdata(pdev);
-	wl = hw->priv;
-	if (!wl) {
-		pr_err("wl: brcms_remove: pci_get_drvdata failed\n");
-		return;
-	}
+	struct ieee80211_hw *hw = bcma_get_drvdata(pdev);
+	struct brcms_info *wl = hw->priv;
 
-	spin_lock_bh(&wl->lock);
-	status = brcms_c_chipmatch(pdev->vendor, pdev->device);
-	spin_unlock_bh(&wl->lock);
-	if (!status) {
-		wiphy_err(wl->wiphy, "wl: brcms_remove: chipmatch "
-				     "failed\n");
-		return;
-	}
 	if (wl->wlc) {
 		wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, false);
 		wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy);
 		ieee80211_unregister_hw(hw);
-		spin_lock_bh(&wl->lock);
-		brcms_down(wl);
-		spin_unlock_bh(&wl->lock);
 	}
-	pci_disable_device(pdev);
 
 	brcms_free(wl);
 
-	pci_set_drvdata(pdev, NULL);
+	bcma_set_drvdata(pdev, NULL);
 	ieee80211_free_hw(hw);
 }
 
@@ -1021,11 +989,9 @@ static int ieee_hw_init(struct ieee80211_hw *hw)
  * it as static.
  *
  *
- * is called in brcms_pci_probe() context, therefore no locking required.
+ * is called in brcms_bcma_probe() context, therefore no locking required.
  */
-static struct brcms_info *brcms_attach(u16 vendor, u16 device,
-				       resource_size_t regs,
-				       struct pci_dev *btparam, uint irq)
+static struct brcms_info *brcms_attach(struct bcma_device *pdev)
 {
 	struct brcms_info *wl = NULL;
 	int unit, err;
@@ -1039,7 +1005,7 @@ static struct brcms_info *brcms_attach(u16 vendor, u16 device,
 		return NULL;
 
 	/* allocate private info */
-	hw = pci_get_drvdata(btparam);	/* btparam == pdev */
+	hw = bcma_get_drvdata(pdev);
 	if (hw != NULL)
 		wl = hw->priv;
 	if (WARN_ON(hw == NULL) || WARN_ON(wl == NULL))
@@ -1051,26 +1017,20 @@ static struct brcms_info *brcms_attach(u16 vendor, u16 device,
 	/* setup the bottom half handler */
 	tasklet_init(&wl->tasklet, brcms_dpc, (unsigned long) wl);
 
-	wl->regsva = ioremap_nocache(regs, PCI_BAR0_WINSZ);
-	if (wl->regsva == NULL) {
-		wiphy_err(wl->wiphy, "wl%d: ioremap() failed\n", unit);
-		goto fail;
-	}
 	spin_lock_init(&wl->lock);
 	spin_lock_init(&wl->isr_lock);
 
 	/* prepare ucode */
-	if (brcms_request_fw(wl, btparam) < 0) {
+	if (brcms_request_fw(wl, pdev->bus->host_pci) < 0) {
 		wiphy_err(wl->wiphy, "%s: Failed to find firmware usually in "
 			  "%s\n", KBUILD_MODNAME, "/lib/firmware/brcm");
 		brcms_release_fw(wl);
-		brcms_remove(btparam);
+		brcms_remove(pdev);
 		return NULL;
 	}
 
 	/* common load-time initialization */
-	wl->wlc = brcms_c_attach(wl, vendor, device, unit, false,
-				 wl->regsva, btparam, &err);
+	wl->wlc = brcms_c_attach((void *)wl, pdev, unit, false, &err);
 	brcms_release_fw(wl);
 	if (!wl->wlc) {
 		wiphy_err(wl->wiphy, "%s: attach() failed with code %d\n",
@@ -1081,15 +1041,13 @@ static struct brcms_info *brcms_attach(u16 vendor, u16 device,
 
 	wl->pub->ieee_hw = hw;
 
-	/* disable mpc */
-	brcms_c_set_radio_mpc(wl->wlc, false);
-
 	/* register our interrupt handler */
-	if (request_irq(irq, brcms_isr, IRQF_SHARED, KBUILD_MODNAME, wl)) {
+	if (request_irq(pdev->bus->host_pci->irq, brcms_isr,
+			IRQF_SHARED, KBUILD_MODNAME, wl)) {
 		wiphy_err(wl->wiphy, "wl%d: request_irq() failed\n", unit);
 		goto fail;
 	}
-	wl->irq = irq;
+	wl->irq = pdev->bus->host_pci->irq;
 
 	/* register module */
 	brcms_c_module_register(wl->pub, "linux", wl, NULL);
@@ -1136,38 +1094,19 @@ fail:
  *
  * Perimeter lock is initialized in the course of this function.
  */
-static int __devinit
-brcms_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+static int __devinit brcms_bcma_probe(struct bcma_device *pdev)
 {
-	int rc;
 	struct brcms_info *wl;
 	struct ieee80211_hw *hw;
-	u32 val;
 
-	dev_info(&pdev->dev, "bus %d slot %d func %d irq %d\n",
-	       pdev->bus->number, PCI_SLOT(pdev->devfn),
-	       PCI_FUNC(pdev->devfn), pdev->irq);
+	dev_info(&pdev->dev, "mfg %x core %x rev %d class %d irq %d\n",
+		 pdev->id.manuf, pdev->id.id, pdev->id.rev, pdev->id.class,
+		 pdev->bus->host_pci->irq);
 
-	if ((pdev->vendor != PCI_VENDOR_ID_BROADCOM) ||
-	    ((pdev->device != 0x0576) &&
-	     ((pdev->device & 0xff00) != 0x4300) &&
-	     ((pdev->device & 0xff00) != 0x4700) &&
-	     ((pdev->device < 43000) || (pdev->device > 43999))))
+	if ((pdev->id.manuf != BCMA_MANUF_BCM) ||
+	    (pdev->id.id != BCMA_CORE_80211))
 		return -ENODEV;
 
-	rc = pci_enable_device(pdev);
-	if (rc) {
-		pr_err("%s: Cannot enable device %d-%d_%d\n",
-		       __func__, pdev->bus->number, PCI_SLOT(pdev->devfn),
-		       PCI_FUNC(pdev->devfn));
-		return -ENODEV;
-	}
-	pci_set_master(pdev);
-
-	pci_read_config_dword(pdev, 0x40, &val);
-	if ((val & 0x0000ff00) != 0)
-		pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
-
 	hw = ieee80211_alloc_hw(sizeof(struct brcms_info), &brcms_ops);
 	if (!hw) {
 		pr_err("%s: ieee80211_alloc_hw failed\n", __func__);
@@ -1176,14 +1115,11 @@ brcms_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	SET_IEEE80211_DEV(hw, &pdev->dev);
 
-	pci_set_drvdata(pdev, hw);
+	bcma_set_drvdata(pdev, hw);
 
 	memset(hw->priv, 0, sizeof(*wl));
 
-	wl = brcms_attach(pdev->vendor, pdev->device,
-			  pci_resource_start(pdev, 0), pdev,
-			  pdev->irq);
-
+	wl = brcms_attach(pdev);
 	if (!wl) {
 		pr_err("%s: %s: brcms_attach failed!\n", KBUILD_MODNAME,
 		       __func__);
@@ -1192,16 +1128,23 @@ brcms_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	return 0;
 }
 
-static int brcms_suspend(struct pci_dev *pdev, pm_message_t state)
+static int brcms_pci_suspend(struct pci_dev *pdev)
+{
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	return pci_set_power_state(pdev, PCI_D3hot);
+}
+
+static int brcms_suspend(struct bcma_device *pdev, pm_message_t state)
 {
 	struct brcms_info *wl;
 	struct ieee80211_hw *hw;
 
-	hw = pci_get_drvdata(pdev);
+	hw = bcma_get_drvdata(pdev);
 	wl = hw->priv;
 	if (!wl) {
 		wiphy_err(wl->wiphy,
-			  "brcms_suspend: pci_get_drvdata failed\n");
+			  "brcms_suspend: bcma_get_drvdata failed\n");
 		return -ENODEV;
 	}
 
@@ -1210,25 +1153,14 @@ static int brcms_suspend(struct pci_dev *pdev, pm_message_t state)
 	wl->pub->hw_up = false;
 	spin_unlock_bh(&wl->lock);
 
-	pci_save_state(pdev);
-	pci_disable_device(pdev);
-	return pci_set_power_state(pdev, PCI_D3hot);
+	/* temporarily do suspend ourselves */
+	return brcms_pci_suspend(pdev->bus->host_pci);
 }
 
-static int brcms_resume(struct pci_dev *pdev)
+static int brcms_pci_resume(struct pci_dev *pdev)
 {
-	struct brcms_info *wl;
-	struct ieee80211_hw *hw;
 	int err = 0;
-	u32 val;
-
-	hw = pci_get_drvdata(pdev);
-	wl = hw->priv;
-	if (!wl) {
-		wiphy_err(wl->wiphy,
-			  "wl: brcms_resume: pci_get_drvdata failed\n");
-		return -ENODEV;
-	}
+	uint val;
 
 	err = pci_set_power_state(pdev, PCI_D0);
 	if (err)
@@ -1246,24 +1178,28 @@ static int brcms_resume(struct pci_dev *pdev)
 	if ((val & 0x0000ff00) != 0)
 		pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
 
+	return 0;
+}
+
+static int brcms_resume(struct bcma_device *pdev)
+{
 	/*
-	*  done. driver will be put in up state
-	*  in brcms_ops_add_interface() call.
+	*  just do pci resume for now until bcma supports it.
 	*/
-	return err;
+	return brcms_pci_resume(pdev->bus->host_pci);
 }
 
-static struct pci_driver brcms_pci_driver = {
+static struct bcma_driver brcms_bcma_driver = {
 	.name     = KBUILD_MODNAME,
-	.probe    = brcms_pci_probe,
+	.probe    = brcms_bcma_probe,
 	.suspend  = brcms_suspend,
 	.resume   = brcms_resume,
 	.remove   = __devexit_p(brcms_remove),
-	.id_table = brcms_pci_id_table,
+	.id_table = brcms_coreid_table,
 };
 
 /**
- * This is the main entry point for the WL driver.
+ * This is the main entry point for the brcmsmac driver.
  *
  * This function determines if a device pointed to by pdev is a WL device,
  * and if so, performs a brcms_attach() on it.
@@ -1278,26 +1214,24 @@ static int __init brcms_module_init(void)
 		brcm_msg_level = msglevel;
 #endif				/* BCMDBG */
 
-	error = pci_register_driver(&brcms_pci_driver);
+	error = bcma_driver_register(&brcms_bcma_driver);
+	printk(KERN_ERR "%s: register returned %d\n", __func__, error);
 	if (!error)
 		return 0;
 
-
-
 	return error;
 }
 
 /**
- * This function unloads the WL driver from the system.
+ * This function unloads the brcmsmac driver from the system.
  *
- * This function unconditionally unloads the WL driver module from the
+ * This function unconditionally unloads the brcmsmac driver module from the
  * system.
  *
  */
 static void __exit brcms_module_exit(void)
 {
-	pci_unregister_driver(&brcms_pci_driver);
-
+	bcma_driver_unregister(&brcms_bcma_driver);
 }
 
 module_init(brcms_module_init);
@@ -1319,8 +1253,7 @@ void brcms_init(struct brcms_info *wl)
 {
 	BCMMSG(wl->pub->ieee_hw->wiphy, "wl%d\n", wl->pub->unit);
 	brcms_reset(wl);
-
-	brcms_c_init(wl->wlc);
+	brcms_c_init(wl->wlc, wl->mute_tx);
 }
 
 /*
@@ -1332,11 +1265,19 @@ uint brcms_reset(struct brcms_info *wl)
 	brcms_c_reset(wl->wlc);
 
 	/* dpc will not be rescheduled */
-	wl->resched = 0;
+	wl->resched = false;
 
 	return 0;
 }
 
+void brcms_fatal_error(struct brcms_info *wl)
+{
+	wiphy_err(wl->wlc->wiphy, "wl%d: fatal error, reinitializing\n",
+		  wl->wlc->pub->unit);
+	brcms_reset(wl);
+	ieee80211_restart_hw(wl->pub->ieee_hw);
+}
+
 /*
  * These are interrupt on/off entry points. Disable interrupts
  * during interrupt state transition.
@@ -1561,11 +1502,10 @@ int brcms_ucode_init_buf(struct brcms_info *wl, void **pbuf, u32 idx)
 			if (le32_to_cpu(hdr->idx) == idx) {
 				pdata = wl->fw.fw_bin[i]->data +
 					le32_to_cpu(hdr->offset);
-				*pbuf = kmalloc(len, GFP_ATOMIC);
+				*pbuf = kmemdup(pdata, len, GFP_ATOMIC);
 				if (*pbuf == NULL)
 					goto fail;
 
-				memcpy(*pbuf, pdata, len);
 				return 0;
 			}
 		}
@@ -1578,7 +1518,7 @@ fail:
 }
 
 /*
- * Precondition: Since this function is called in brcms_pci_probe() context,
+ * Precondition: Since this function is called in brcms_bcma_probe() context,
  * no locking is required.
  */
 int brcms_ucode_init_uint(struct brcms_info *wl, size_t *n_bytes, u32 idx)
@@ -1618,7 +1558,7 @@ void brcms_ucode_free_buf(void *p)
 /*
  * checks validity of all firmware images loaded from user space
  *
- * Precondition: Since this function is called in brcms_pci_probe() context,
+ * Precondition: Since this function is called in brcms_bcma_probe() context,
  * no locking is required.
  */
 int brcms_check_firmwares(struct brcms_info *wl)