Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6

* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6:
  Fix common misspellings

22 files changed, 50 insertions, 50 deletions

diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index b761fec0d72..ccc2edaaeda 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -974,7 +974,7 @@ void ar9170_rx(struct ar9170 *ar, struct sk_buff *skb)
 			if (ar->rx_failover_missing <= 0) {
 				/*
 				 * nested ar9170_rx call!
-				 * termination is guranteed, even when the
+				 * termination is guaranteed, even when the
 				 * combined frame also have a element with
 				 * a bad tag.
 				 */
diff --git a/drivers/net/wireless/ath/ar9170/phy.c b/drivers/net/wireless/ath/ar9170/phy.c
index 0dbfcf79ac9..aa8d06ba1ee 100644
--- a/drivers/net/wireless/ath/ar9170/phy.c
+++ b/drivers/net/wireless/ath/ar9170/phy.c
@@ -424,7 +424,7 @@ static u32 ar9170_get_default_phy_reg_val(u32 reg, bool is_2ghz, bool is_40mhz)
 
 /*
  * initialize some phy regs from eeprom values in modal_header[]
- * acc. to band and bandwith
+ * acc. to band and bandwidth
  */
 static int ar9170_init_phy_from_eeprom(struct ar9170 *ar,
 				bool is_2ghz, bool is_40mhz)
diff --git a/drivers/net/wireless/ath/ath5k/ani.h b/drivers/net/wireless/ath/ath5k/ani.h
index d0a664039c8..03401539709 100644
--- a/drivers/net/wireless/ath/ath5k/ani.h
+++ b/drivers/net/wireless/ath/ath5k/ani.h
@@ -27,7 +27,7 @@
 #define ATH5K_ANI_RSSI_THR_HIGH		40
 #define ATH5K_ANI_RSSI_THR_LOW		7
 
-/* maximum availabe levels */
+/* maximum available levels */
 #define ATH5K_ANI_MAX_FIRSTEP_LVL	2
 #define ATH5K_ANI_MAX_NOISE_IMM_LVL	1
 
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 4d7f21ee111..349a5963931 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -1953,7 +1953,7 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf)
 
 #define FUDGE AR5K_TUNE_SW_BEACON_RESP + 3
 	/* We use FUDGE to make sure the next TBTT is ahead of the current TU.
-	 * Since we later substract AR5K_TUNE_SW_BEACON_RESP (10) in the timer
+	 * Since we later subtract AR5K_TUNE_SW_BEACON_RESP (10) in the timer
 	 * configuration we need to make sure it is bigger than that. */
 
 	if (bc_tsf == -1) {
@@ -1971,7 +1971,7 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf)
 		intval |= AR5K_BEACON_RESET_TSF;
 	} else if (bc_tsf > hw_tsf) {
 		/*
-		 * beacon received, SW merge happend but HW TSF not yet updated.
+		 * beacon received, SW merge happened but HW TSF not yet updated.
 		 * not possible to reconfigure timers yet, but next time we
 		 * receive a beacon with the same BSSID, the hardware will
 		 * automatically update the TSF and then we need to reconfigure
@@ -2651,7 +2651,7 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan,
 	synchronize_irq(sc->irq);
 	stop_tasklets(sc);
 
-	/* Save ani mode and disable ANI durring
+	/* Save ani mode and disable ANI during
 	 * reset. If we don't we might get false
 	 * PHY error interrupts. */
 	ani_mode = ah->ah_sc->ani_state.ani_mode;
diff --git a/drivers/net/wireless/ath/ath5k/desc.c b/drivers/net/wireless/ath/ath5k/desc.c
index 16b44ff7dd3..a8fcc94269f 100644
--- a/drivers/net/wireless/ath/ath5k/desc.c
+++ b/drivers/net/wireless/ath/ath5k/desc.c
@@ -51,7 +51,7 @@ ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
 	/*
 	 * Validate input
 	 * - Zero retries don't make sense.
-	 * - A zero rate will put the HW into a mode where it continously sends
+	 * - A zero rate will put the HW into a mode where it continuously sends
 	 *   noise on the channel, so it is important to avoid this.
 	 */
 	if (unlikely(tx_tries0 == 0)) {
@@ -190,7 +190,7 @@ static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah,
 	/*
 	 * Validate input
 	 * - Zero retries don't make sense.
-	 * - A zero rate will put the HW into a mode where it continously sends
+	 * - A zero rate will put the HW into a mode where it continuously sends
 	 *   noise on the channel, so it is important to avoid this.
 	 */
 	if (unlikely(tx_tries0 == 0)) {
@@ -300,7 +300,7 @@ ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
 	/*
 	 * Rates can be 0 as long as the retry count is 0 too.
 	 * A zero rate and nonzero retry count will put the HW into a mode where
-	 * it continously sends noise on the channel, so it is important to
+	 * it continuously sends noise on the channel, so it is important to
 	 * avoid this.
 	 */
 	if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) ||
@@ -342,7 +342,7 @@ ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
 \***********************/
 
 /*
- * Proccess the tx status descriptor on 5210/5211
+ * Process the tx status descriptor on 5210/5211
  */
 static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah,
 		struct ath5k_desc *desc, struct ath5k_tx_status *ts)
@@ -394,7 +394,7 @@ static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah,
 }
 
 /*
- * Proccess a tx status descriptor on 5212
+ * Process a tx status descriptor on 5212
  */
 static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah,
 		struct ath5k_desc *desc, struct ath5k_tx_status *ts)
@@ -519,7 +519,7 @@ int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
 }
 
 /*
- * Proccess the rx status descriptor on 5210/5211
+ * Process the rx status descriptor on 5210/5211
  */
 static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah,
 		struct ath5k_desc *desc, struct ath5k_rx_status *rs)
@@ -602,7 +602,7 @@ static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah,
 }
 
 /*
- * Proccess the rx status descriptor on 5212
+ * Process the rx status descriptor on 5212
  */
 static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah,
 					struct ath5k_desc *desc,
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index b6561f785c6..efb672cb31e 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -1080,7 +1080,7 @@ ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode)
  *
  * To recreate the curves we read here the points and interpolate
  * later. Note that in most cases only 2 (higher and lower) curves are
- * used (like RF5112) but vendors have the oportunity to include all
+ * used (like RF5112) but vendors have the opportunity to include all
  * 4 curves on eeprom. The final curve (higher power) has an extra
  * point for better accuracy like RF5112.
  */
@@ -1302,7 +1302,7 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode)
 			/*
 			 * Pd gain 0 is not the last pd gain
 			 * so it only has 2 pd points.
-			 * Continue wih pd gain 1.
+			 * Continue with pd gain 1.
 			 */
 			pcinfo->pwr_i[1] = (val >> 10) & 0x1f;
 
diff --git a/drivers/net/wireless/ath/ath5k/pci.c b/drivers/net/wireless/ath/ath5k/pci.c
index 66598a0d1df..3c44689a700 100644
--- a/drivers/net/wireless/ath/ath5k/pci.c
+++ b/drivers/net/wireless/ath/ath5k/pci.c
@@ -57,7 +57,7 @@ static void ath5k_pci_read_cachesize(struct ath_common *common, int *csz)
 	*csz = (int)u8tmp;
 
 	/*
-	 * This check was put in to avoid "unplesant" consequences if
+	 * This check was put in to avoid "unpleasant" consequences if
 	 * the bootrom has not fully initialized all PCI devices.
 	 * Sometimes the cache line size register is not set
 	 */
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
index a702817daf7..d9b3f828455 100644
--- a/drivers/net/wireless/ath/ath5k/pcu.c
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -472,7 +472,7 @@ void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter)
 	}
 
 	/*
-	 * The AR5210 uses promiscous mode to detect radar activity
+	 * The AR5210 uses promiscuous mode to detect radar activity
 	 */
 	if (ah->ah_version == AR5K_AR5210 &&
 			(filter & AR5K_RX_FILTER_RADARERR)) {
@@ -706,8 +706,8 @@ ath5k_check_timer_win(int a, int b, int window, int intval)
  * The need for this function arises from the fact that we have 4 separate
  * HW timer registers (TIMER0 - TIMER3), which are closely related to the
  * next beacon target time (NBTT), and that the HW updates these timers
- * seperately based on the current TSF value. The hardware increments each
- * timer by the beacon interval, when the local TSF coverted to TU is equal
+ * separately based on the current TSF value. The hardware increments each
+ * timer by the beacon interval, when the local TSF converted to TU is equal
  * to the value stored in the timer.
  *
  * The reception of a beacon with the same BSSID can update the local HW TSF
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 62ce2f4e860..55441913344 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -335,11 +335,11 @@ static void ath5k_hw_wait_for_synth(struct ath5k_hw *ah,
  * http://madwifi-project.org/ticket/1659
  * with various measurements and diagrams
  *
- * TODO: Deal with power drops due to probes by setting an apropriate
+ * TODO: Deal with power drops due to probes by setting an appropriate
  * tx power on the probe packets ! Make this part of the calibration process.
  */
 
-/* Initialize ah_gain durring attach */
+/* Initialize ah_gain during attach */
 int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah)
 {
 	/* Initialize the gain optimization values */
@@ -1049,7 +1049,7 @@ static int ath5k_hw_rfregs_init(struct ath5k_hw *ah,
 \**************************/
 
 /*
- * Convertion needed for RF5110
+ * Conversion needed for RF5110
  */
 static u32 ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel)
 {
@@ -1088,7 +1088,7 @@ static int ath5k_hw_rf5110_channel(struct ath5k_hw *ah,
 }
 
 /*
- * Convertion needed for 5111
+ * Conversion needed for 5111
  */
 static int ath5k_hw_rf5111_chan2athchan(unsigned int ieee,
 		struct ath5k_athchan_2ghz *athchan)
@@ -2201,7 +2201,7 @@ ath5k_create_power_curve(s16 pmin, s16 pmax,
 /*
  * Get the surrounding per-channel power calibration piers
  * for a given frequency so that we can interpolate between
- * them and come up with an apropriate dataset for our current
+ * them and come up with an appropriate dataset for our current
  * channel.
  */
 static void
@@ -2618,7 +2618,7 @@ ath5k_write_pcdac_table(struct ath5k_hw *ah)
 /*
  * Set the gain boundaries and create final Power to PDADC table
  *
- * We can have up to 4 pd curves, we need to do a simmilar process
+ * We can have up to 4 pd curves, we need to do a similar process
  * as we do for RF5112. This time we don't have an edge_flag but we
  * set the gain boundaries on a separate register.
  */
@@ -2826,13 +2826,13 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,
 	u32 target = channel->center_freq;
 	int pdg, i;
 
-	/* Get surounding freq piers for this channel */
+	/* Get surrounding freq piers for this channel */
 	ath5k_get_chan_pcal_surrounding_piers(ah, channel,
 						&pcinfo_L,
 						&pcinfo_R);
 
 	/* Loop over pd gain curves on
-	 * surounding freq piers by index */
+	 * surrounding freq piers by index */
 	for (pdg = 0; pdg < ee->ee_pd_gains[ee_mode]; pdg++) {
 
 		/* Fill curves in reverse order
@@ -2923,7 +2923,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,
 		}
 
 		/* Interpolate between curves
-		 * of surounding freq piers to
+		 * of surrounding freq piers to
 		 * get the final curve for this
 		 * pd gain. Re-use tmpL for interpolation
 		 * output */
@@ -2947,7 +2947,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,
 
 	/* Fill min and max power levels for this
 	 * channel by interpolating the values on
-	 * surounding channels to complete the dataset */
+	 * surrounding channels to complete the dataset */
 	ah->ah_txpower.txp_min_pwr = ath5k_get_interpolated_value(target,
 					(s16) pcinfo_L->freq,
 					(s16) pcinfo_R->freq,
@@ -3179,7 +3179,7 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
 
 	/* FIXME: TPC scale reduction */
 
-	/* Get surounding channels for per-rate power table
+	/* Get surrounding channels for per-rate power table
 	 * calibration */
 	ath5k_get_rate_pcal_data(ah, channel, &rate_info);
 
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index e1c9abd8c87..d12b827033c 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -132,8 +132,8 @@
  * As i can see in ar5k_ar5210_tx_start Reyk uses some of the values of BCR
  * for this register, so i guess TQ1V,TQ1FV and BDMAE have the same meaning
  * here and SNP/SNAP means "snapshot" (so this register gets synced with BCR).
- * So SNAPPEDBCRVALID sould also stand for "snapped BCR -values- valid", so i
- * renamed it to SNAPSHOTSVALID to make more sense. I realy have no idea what
+ * So SNAPPEDBCRVALID should also stand for "snapped BCR -values- valid", so i
+ * renamed it to SNAPSHOTSVALID to make more sense. I really have no idea what
  * else can it be. I also renamed SNPBCMD to SNPADHOC to match BCR.
  */
 #define AR5K_BSR		0x002c			/* Register Address */
@@ -283,7 +283,7 @@
  */
 #define AR5K_ISR		0x001c			/* Register Address [5210] */
 #define AR5K_PISR		0x0080			/* Register Address [5211+] */
-#define AR5K_ISR_RXOK		0x00000001	/* Frame successfuly recieved */
+#define AR5K_ISR_RXOK		0x00000001	/* Frame successfuly received */
 #define AR5K_ISR_RXDESC		0x00000002	/* RX descriptor request */
 #define AR5K_ISR_RXERR		0x00000004	/* Receive error */
 #define AR5K_ISR_RXNOFRM	0x00000008	/* No frame received (receive timeout) */
@@ -372,12 +372,12 @@
 /*
  * Interrupt Mask Registers
  *
- * As whith ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary
+ * As with ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary
  * (AR5K_PIMR) and 4 secondary IMRs (AR5K_SIMRx). Note that ISR/IMR flags match.
  */
 #define	AR5K_IMR		0x0020			/* Register Address [5210] */
 #define AR5K_PIMR		0x00a0			/* Register Address [5211+] */
-#define AR5K_IMR_RXOK		0x00000001	/* Frame successfuly recieved*/
+#define AR5K_IMR_RXOK		0x00000001	/* Frame successfuly received*/
 #define AR5K_IMR_RXDESC		0x00000002	/* RX descriptor request*/
 #define AR5K_IMR_RXERR		0x00000004	/* Receive error*/
 #define AR5K_IMR_RXNOFRM	0x00000008	/* No frame received (receive timeout)*/
@@ -895,7 +895,7 @@
 #define AR5K_PCICFG_SL_INTEN		0x00000800	/* Enable interrupts when asleep */
 #define AR5K_PCICFG_LED_BCTL		0x00001000	/* Led blink (?) [5210] */
 #define AR5K_PCICFG_RETRY_FIX		0x00001000	/* Enable pci core retry fix */
-#define AR5K_PCICFG_SL_INPEN		0x00002000	/* Sleep even whith pending interrupts*/
+#define AR5K_PCICFG_SL_INPEN		0x00002000	/* Sleep even with pending interrupts*/
 #define AR5K_PCICFG_SPWR_DN		0x00010000	/* Mask for power status */
 #define AR5K_PCICFG_LEDMODE		0x000e0000	/* Ledmode [5211+] */
 #define AR5K_PCICFG_LEDMODE_PROP	0x00000000	/* Blink on standard traffic [5211+] */
diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
index ffcf44a4058..106c0b06cf5 100644
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -142,7 +142,7 @@ static void ar5008_hw_force_bias(struct ath_hw *ah, u16 synth_freq)
 
 /**
  * ar5008_hw_set_channel - tune to a channel on the external AR2133/AR5133 radios
- * @ah: atheros hardware stucture
+ * @ah: atheros hardware structure
  * @chan:
  *
  * For the external AR2133/AR5133 radios, takes the MHz channel value and set
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 4a927180299..6eadf975ae4 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3240,7 +3240,7 @@ static int ar9300_compress_decision(struct ath_hw *ah,
 			eep = ar9003_eeprom_struct_find_by_id(reference);
 			if (eep == NULL) {
 				ath_dbg(common, ATH_DBG_EEPROM,
-					"cant find reference eeprom struct %d\n",
+					"can't find reference eeprom struct %d\n",
 					reference);
 				return -1;
 			}
diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.c b/drivers/net/wireless/ath/ath9k/htc_hst.c
index c41ab8c3016..62e139a30a7 100644
--- a/drivers/net/wireless/ath/ath9k/htc_hst.c
+++ b/drivers/net/wireless/ath/ath9k/htc_hst.c
@@ -360,7 +360,7 @@ ret:
  * HTC Messages are handled directly here and the obtained SKB
  * is freed.
  *
- * Sevice messages (Data, WMI) passed to the corresponding
+ * Service messages (Data, WMI) passed to the corresponding
  * endpoint RX handlers, which have to free the SKB.
  */
 void ath9k_htc_rx_msg(struct htc_target *htc_handle,
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index e83128c50f7..9c65459be10 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -44,7 +44,7 @@ static void ath_pci_read_cachesize(struct ath_common *common, int *csz)
 	*csz = (int)u8tmp;
 
 	/*
-	 * This check was put in to avoid "unplesant" consequences if
+	 * This check was put in to avoid "unpleasant" consequences if
 	 * the bootrom has not fully initialized all PCI devices.
 	 * Sometimes the cache line size register is not set
 	 */
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index a3241cd089b..4c0d36a6980 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -792,7 +792,7 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
 
 		tx_info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE;
 	} else {
-		/* Set the choosen rate. No RTS for first series entry. */
+		/* Set the chosen rate. No RTS for first series entry. */
 		ath_rc_rate_set_series(rate_table, &rates[i++], txrc,
 				       try_per_rate, rix, 0);
 	}
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 26734e53b37..88fa7fdffd0 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -628,8 +628,8 @@ static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf,
 				 (u32)ATH_AMPDU_LIMIT_MAX);
 
 	/*
-	 * h/w can accept aggregates upto 16 bit lengths (65535).
-	 * The IE, however can hold upto 65536, which shows up here
+	 * h/w can accept aggregates up to 16 bit lengths (65535).
+	 * The IE, however can hold up to 65536, which shows up here
 	 * as zero. Ignore 65536 since we  are constrained by hw.
 	 */
 	if (tid->an->maxampdu)
diff --git a/drivers/net/wireless/ath/carl9170/carl9170.h b/drivers/net/wireless/ath/carl9170/carl9170.h
index 9cad061cc1d..3d4ed586373 100644
--- a/drivers/net/wireless/ath/carl9170/carl9170.h
+++ b/drivers/net/wireless/ath/carl9170/carl9170.h
@@ -161,7 +161,7 @@ struct carl9170_sta_tid {
  * Naturally: The higher the limit, the faster the device CAN send.
  * However, even a slight over-commitment at the wrong time and the
  * hardware is doomed to send all already-queued frames at suboptimal
- * rates. This in turn leads to an enourmous amount of unsuccessful
+ * rates. This in turn leads to an enormous amount of unsuccessful
  * retries => Latency goes up, whereas the throughput goes down. CRASH!
  */
 #define CARL9170_NUM_TX_LIMIT_HARD	((AR9170_TXQ_DEPTH * 3) / 2)
diff --git a/drivers/net/wireless/ath/carl9170/phy.c b/drivers/net/wireless/ath/carl9170/phy.c
index b6b0de60050..b6ae0e179c8 100644
--- a/drivers/net/wireless/ath/carl9170/phy.c
+++ b/drivers/net/wireless/ath/carl9170/phy.c
@@ -427,7 +427,7 @@ static u32 carl9170_def_val(u32 reg, bool is_2ghz, bool is_40mhz)
 
 /*
  * initialize some phy regs from eeprom values in modal_header[]
- * acc. to band and bandwith
+ * acc. to band and bandwidth
  */
 static int carl9170_init_phy_from_eeprom(struct ar9170 *ar,
 				bool is_2ghz, bool is_40mhz)
diff --git a/drivers/net/wireless/ath/carl9170/rx.c b/drivers/net/wireless/ath/carl9170/rx.c
index 84866a4b835..ec21ea9fd8d 100644
--- a/drivers/net/wireless/ath/carl9170/rx.c
+++ b/drivers/net/wireless/ath/carl9170/rx.c
@@ -849,7 +849,7 @@ static void carl9170_rx_stream(struct ar9170 *ar, void *buf, unsigned int len)
 				/*
 				 * nested carl9170_rx_stream call!
 				 *
-				 * termination is guranteed, even when the
+				 * termination is guaranteed, even when the
 				 * combined frame also have an element with
 				 * a bad tag.
 				 */
diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c
index f82c400be28..2fb53d06751 100644
--- a/drivers/net/wireless/ath/carl9170/usb.c
+++ b/drivers/net/wireless/ath/carl9170/usb.c
@@ -430,7 +430,7 @@ static void carl9170_usb_rx_complete(struct urb *urb)
 			 * The system is too slow to cope with
 			 * the enormous workload. We have simply
 			 * run out of active rx urbs and this
-			 * unfortunatly leads to an unpredictable
+			 * unfortunately leads to an unpredictable
 			 * device.
 			 */
 
diff --git a/drivers/net/wireless/ath/hw.c b/drivers/net/wireless/ath/hw.c
index 183c2828138..cc11d66f15b 100644
--- a/drivers/net/wireless/ath/hw.c
+++ b/drivers/net/wireless/ath/hw.c
@@ -86,7 +86,7 @@
  * IFRAME-01:  0110
  *
  * An easy eye-inspeciton of this already should tell you that this frame
- * will not pass our check. This is beacuse the bssid_mask tells the
+ * will not pass our check. This is because the bssid_mask tells the
  * hardware to only look at the second least significant bit and the
  * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB
  * as 1, which does not match 0.
diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index f828f294ba8..0e1b8793c86 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -268,7 +268,7 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy,
 	}
 
 	/*
-	 * If a country IE has been recieved check its rule for this
+	 * If a country IE has been received check its rule for this
 	 * channel first before enabling active scan. The passive scan
 	 * would have been enforced by the initial processing of our
 	 * custom regulatory domain.
@@ -476,7 +476,7 @@ ath_regd_init_wiphy(struct ath_regulatory *reg,
 		wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;
 	} else {
 		/*
-		 * This gets applied in the case of the absense of CRDA,
+		 * This gets applied in the case of the absence of CRDA,
 		 * it's our own custom world regulatory domain, similar to
 		 * cfg80211's but we enable passive scanning.
 		 */