Merge branch 'master' into for-upstream

Conflicts:

	Documentation/ABI/testing/sysfs-bus-usb
	drivers/Makefile

20 files changed, 6314 insertions, 5686 deletions

diff --git a/drivers/net/wireless/ath5k/Makefile b/drivers/net/wireless/ath5k/Makefile
index 564ecd0c5d4..719cfaef708 100644
--- a/drivers/net/wireless/ath5k/Makefile
+++ b/drivers/net/wireless/ath5k/Makefile
@@ -1,6 +1,14 @@
-ath5k-y				+= base.o
-ath5k-y				+= hw.o
+ath5k-y				+= caps.o
 ath5k-y				+= initvals.o
+ath5k-y				+= eeprom.o
+ath5k-y				+= gpio.o
+ath5k-y				+= desc.o
+ath5k-y				+= dma.o
+ath5k-y				+= qcu.o
+ath5k-y				+= pcu.o
 ath5k-y				+= phy.o
+ath5k-y				+= reset.o
+ath5k-y				+= attach.o
+ath5k-y				+= base.o
 ath5k-$(CONFIG_ATH5K_DEBUG)	+= debug.o
 obj-$(CONFIG_ATH5K)		+= ath5k.o
diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h
index 9102eea3c8b..53ea439aff4 100644
--- a/drivers/net/wireless/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath5k/ath5k.h
@@ -18,18 +18,23 @@
 #ifndef _ATH5K_H
 #define _ATH5K_H
 
-/* Set this to 1 to disable regulatory domain restrictions for channel tests.
- * WARNING: This is for debuging only and has side effects (eg. scan takes too
- * long and results timeouts). It's also illegal to tune to some of the
- * supported frequencies in some countries, so use this at your own risk,
- * you've been warned. */
+/* TODO: Clean up channel debuging -doesn't work anyway- and start
+ * working on reg. control code using all available eeprom information
+ * -rev. engineering needed- */
 #define CHAN_DEBUG	0
 
 #include <linux/io.h>
 #include <linux/types.h>
 #include <net/mac80211.h>
 
-#include "hw.h"
+/* RX/TX descriptor hw structs
+ * TODO: Driver part should only see sw structs */
+#include "desc.h"
+
+/* EEPROM structs/offsets
+ * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities)
+ * and clean up common bits, then introduce set/get functions in eeprom.c */
+#include "eeprom.h"
 
 /* PCI IDs */
 #define PCI_DEVICE_ID_ATHEROS_AR5210 		0x0007 /* AR5210 */
@@ -87,7 +92,92 @@
 	ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__)
 
 /*
+ * AR5K REGISTER ACCESS
+ */
+
+/* Some macros to read/write fields */
+
+/* First shift, then mask */
+#define AR5K_REG_SM(_val, _flags)					\
+	(((_val) << _flags##_S) & (_flags))
+
+/* First mask, then shift */
+#define AR5K_REG_MS(_val, _flags)					\
+	(((_val) & (_flags)) >> _flags##_S)
+
+/* Some registers can hold multiple values of interest. For this
+ * reason when we want to write to these registers we must first
+ * retrieve the values which we do not want to clear (lets call this
+ * old_data) and then set the register with this and our new_value:
+ * ( old_data | new_value) */
+#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val)			\
+	ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \
+	    (((_val) << _flags##_S) & (_flags)), _reg)
+
+#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask)			\
+	ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) &		\
+			(_mask)) | (_flags), _reg)
+
+#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags)				\
+	ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg)
+
+#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags)			\
+	ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg)
+
+/* Access to PHY registers */
+#define AR5K_PHY_READ(ah, _reg)					\
+	ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2))
+
+#define AR5K_PHY_WRITE(ah, _reg, _val)					\
+	ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2))
+
+/* Access QCU registers per queue */
+#define AR5K_REG_READ_Q(ah, _reg, _queue)				\
+	(ath5k_hw_reg_read(ah, _reg) & (1 << _queue))			\
+
+#define AR5K_REG_WRITE_Q(ah, _reg, _queue)				\
+	ath5k_hw_reg_write(ah, (1 << _queue), _reg)
+
+#define AR5K_Q_ENABLE_BITS(_reg, _queue) do {				\
+	_reg |= 1 << _queue;						\
+} while (0)
+
+#define AR5K_Q_DISABLE_BITS(_reg, _queue) do {				\
+	_reg &= ~(1 << _queue);						\
+} while (0)
+
+/* Used while writing initvals */
+#define AR5K_REG_WAIT(_i) do {						\
+	if (_i % 64)							\
+		udelay(1);						\
+} while (0)
+
+/* Register dumps are done per operation mode */
+#define AR5K_INI_RFGAIN_5GHZ		0
+#define AR5K_INI_RFGAIN_2GHZ		1
+
+/* TODO: Clean this up */
+#define AR5K_INI_VAL_11A		0
+#define AR5K_INI_VAL_11A_TURBO		1
+#define AR5K_INI_VAL_11B		2
+#define AR5K_INI_VAL_11G		3
+#define AR5K_INI_VAL_11G_TURBO		4
+#define AR5K_INI_VAL_XR			0
+#define AR5K_INI_VAL_MAX		5
+
+#define AR5K_RF5111_INI_RF_MAX_BANKS	AR5K_MAX_RF_BANKS
+#define AR5K_RF5112_INI_RF_MAX_BANKS	AR5K_MAX_RF_BANKS
+
+/* Used for BSSID etc manipulation */
+#define AR5K_LOW_ID(_a)(				\
+(_a)[0] | (_a)[1] << 8 | (_a)[2] << 16 | (_a)[3] << 24	\
+)
+
+#define AR5K_HIGH_ID(_a)	((_a)[4] | (_a)[5] << 8)
+
+/*
  * Some tuneable values (these should be changeable by the user)
+ * TODO: Make use of them and add more options OR use debug/configfs
  */
 #define AR5K_TUNE_DMA_BEACON_RESP		2
 #define AR5K_TUNE_SW_BEACON_RESP		10
@@ -98,13 +188,13 @@
 #define AR5K_TUNE_REGISTER_TIMEOUT		20000
 /* Register for RSSI threshold has a mask of 0xff, so 255 seems to
  * be the max value. */
-#define AR5K_TUNE_RSSI_THRES                   129
+#define AR5K_TUNE_RSSI_THRES			129
 /* This must be set when setting the RSSI threshold otherwise it can
  * prevent a reset. If AR5K_RSSI_THR is read after writing to it
  * the BMISS_THRES will be seen as 0, seems harware doesn't keep
  * track of it. Max value depends on harware. For AR5210 this is just 7.
  * For AR5211+ this seems to be up to 255. */
-#define AR5K_TUNE_BMISS_THRES                  7
+#define AR5K_TUNE_BMISS_THRES			7
 #define AR5K_TUNE_REGISTER_DWELL_TIME		20000
 #define AR5K_TUNE_BEACON_INTERVAL		100
 #define AR5K_TUNE_AIFS				2
@@ -123,6 +213,55 @@
 #define AR5K_TUNE_ANT_DIVERSITY			true
 #define AR5K_TUNE_HWTXTRIES			4
 
+#define AR5K_INIT_CARR_SENSE_EN			1
+
+/*Swap RX/TX Descriptor for big endian archs*/
+#if defined(__BIG_ENDIAN)
+#define AR5K_INIT_CFG	(		\
+	AR5K_CFG_SWTD | AR5K_CFG_SWRD	\
+)
+#else
+#define AR5K_INIT_CFG	0x00000000
+#endif
+
+/* Initial values */
+#define AR5K_INIT_TX_LATENCY			502
+#define AR5K_INIT_USEC				39
+#define AR5K_INIT_USEC_TURBO			79
+#define AR5K_INIT_USEC_32			31
+#define AR5K_INIT_SLOT_TIME			396
+#define AR5K_INIT_SLOT_TIME_TURBO		480
+#define AR5K_INIT_ACK_CTS_TIMEOUT		1024
+#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO		0x08000800
+#define AR5K_INIT_PROG_IFS			920
+#define AR5K_INIT_PROG_IFS_TURBO		960
+#define AR5K_INIT_EIFS				3440
+#define AR5K_INIT_EIFS_TURBO			6880
+#define AR5K_INIT_SIFS				560
+#define AR5K_INIT_SIFS_TURBO			480
+#define AR5K_INIT_SH_RETRY			10
+#define AR5K_INIT_LG_RETRY			AR5K_INIT_SH_RETRY
+#define AR5K_INIT_SSH_RETRY			32
+#define AR5K_INIT_SLG_RETRY			AR5K_INIT_SSH_RETRY
+#define AR5K_INIT_TX_RETRY			10
+
+#define AR5K_INIT_TRANSMIT_LATENCY		(			\
+	(AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) |	\
+	(AR5K_INIT_USEC)						\
+)
+#define AR5K_INIT_TRANSMIT_LATENCY_TURBO	(			\
+	(AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) |	\
+	(AR5K_INIT_USEC_TURBO)						\
+)
+#define AR5K_INIT_PROTO_TIME_CNTRL		(			\
+	(AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) |	\
+	(AR5K_INIT_PROG_IFS)						\
+)
+#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO	(			\
+	(AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \
+	(AR5K_INIT_PROG_IFS_TURBO)					\
+)
+
 /* token to use for aifs, cwmin, cwmax in MadWiFi */
 #define	AR5K_TXQ_USEDEFAULT	((u32) -1)
 
@@ -142,7 +281,9 @@ enum ath5k_radio {
 	AR5K_RF5112	= 2,
 	AR5K_RF2413	= 3,
 	AR5K_RF5413	= 4,
-	AR5K_RF2425	= 5,
+	AR5K_RF2316	= 5,
+	AR5K_RF2317	= 6,
+	AR5K_RF2425	= 7,
 };
 
 /*
@@ -150,7 +291,7 @@ enum ath5k_radio {
  */
 
 enum ath5k_srev_type {
-	AR5K_VERSION_VER,
+	AR5K_VERSION_MAC,
 	AR5K_VERSION_RAD,
 };
 
@@ -162,23 +303,24 @@ struct ath5k_srev_name {
 
 #define AR5K_SREV_UNKNOWN	0xffff
 
-#define AR5K_SREV_VER_AR5210	0x00
-#define AR5K_SREV_VER_AR5311	0x10
-#define AR5K_SREV_VER_AR5311A	0x20
-#define AR5K_SREV_VER_AR5311B	0x30
-#define AR5K_SREV_VER_AR5211	0x40
-#define AR5K_SREV_VER_AR5212	0x50
-#define AR5K_SREV_VER_AR5213	0x55
-#define AR5K_SREV_VER_AR5213A	0x59
-#define AR5K_SREV_VER_AR2413	0x78
-#define AR5K_SREV_VER_AR2414	0x79
-#define AR5K_SREV_VER_AR2424	0xa0 /* PCI-E */
-#define AR5K_SREV_VER_AR5424	0xa3 /* PCI-E */
-#define AR5K_SREV_VER_AR5413	0xa4
-#define AR5K_SREV_VER_AR5414	0xa5
-#define AR5K_SREV_VER_AR5416	0xc0 /* PCI-E */
-#define AR5K_SREV_VER_AR5418	0xca /* PCI-E */
-#define AR5K_SREV_VER_AR2425	0xe2 /* PCI-E */
+#define AR5K_SREV_AR5210	0x00 /* Crete */
+#define AR5K_SREV_AR5311	0x10 /* Maui 1 */
+#define AR5K_SREV_AR5311A	0x20 /* Maui 2 */
+#define AR5K_SREV_AR5311B	0x30 /* Spirit */
+#define AR5K_SREV_AR5211	0x40 /* Oahu */
+#define AR5K_SREV_AR5212	0x50 /* Venice */
+#define AR5K_SREV_AR5213	0x55 /* ??? */
+#define AR5K_SREV_AR5213A	0x59 /* Hainan */
+#define AR5K_SREV_AR2413	0x78 /* Griffin lite */
+#define AR5K_SREV_AR2414	0x70 /* Griffin */
+#define AR5K_SREV_AR5424	0x90 /* Condor */
+#define AR5K_SREV_AR5413	0xa4 /* Eagle lite */
+#define AR5K_SREV_AR5414	0xa0 /* Eagle */
+#define AR5K_SREV_AR2415	0xb0 /* Cobra */
+#define AR5K_SREV_AR5416	0xc0 /* PCI-E */
+#define AR5K_SREV_AR5418	0xca /* PCI-E */
+#define AR5K_SREV_AR2425	0xe0 /* Swan */
+#define AR5K_SREV_AR2417	0xf0 /* Nala */
 
 #define AR5K_SREV_RAD_5110	0x00
 #define AR5K_SREV_RAD_5111	0x10
@@ -190,13 +332,22 @@ struct ath5k_srev_name {
 #define AR5K_SREV_RAD_2112	0x40
 #define AR5K_SREV_RAD_2112A	0x45
 #define	AR5K_SREV_RAD_2112B	0x46
-#define AR5K_SREV_RAD_SC0	0x50	/* Found on 2413/2414 */
-#define AR5K_SREV_RAD_SC1	0x60	/* Found on 5413/5414 */
-#define AR5K_SREV_RAD_SC2	0xa0	/* Found on 2424-5/5424 */
-#define AR5K_SREV_RAD_5133	0xc0	/* MIMO found on 5418 */
+#define AR5K_SREV_RAD_2413	0x50
+#define AR5K_SREV_RAD_5413	0x60
+#define AR5K_SREV_RAD_2316	0x70
+#define AR5K_SREV_RAD_2317	0x80
+#define AR5K_SREV_RAD_5424	0xa0 /* Mostly same as 5413 */
+#define AR5K_SREV_RAD_2425	0xa2
+#define AR5K_SREV_RAD_5133	0xc0
+
+#define AR5K_SREV_PHY_5211	0x30
+#define AR5K_SREV_PHY_5212	0x41
+#define AR5K_SREV_PHY_2112B	0x43
+#define AR5K_SREV_PHY_2413	0x45
+#define AR5K_SREV_PHY_5413	0x61
+#define AR5K_SREV_PHY_2425	0x70
 
 /* IEEE defs */
-
 #define IEEE80211_MAX_LEN       2500
 
 /* TODO add support to mac80211 for vendor-specific rates and modes */
@@ -268,27 +419,21 @@ enum ath5k_driver_mode {
 	AR5K_MODE_MAX		=	5
 };
 
-/* adding this flag to rate_code enables short preamble, see ar5212_reg.h */
-#define AR5K_SET_SHORT_PREAMBLE 0x04
-
-#define HAS_SHPREAMBLE(_ix) \
-	(rt->rates[_ix].modulation == IEEE80211_RATE_SHORT_PREAMBLE)
-#define SHPREAMBLE_FLAG(_ix) \
-	(HAS_SHPREAMBLE(_ix) ? AR5K_SET_SHORT_PREAMBLE : 0)
-
 
 /****************\
   TX DEFINITIONS
 \****************/
 
 /*
- * TX Status
+ * TX Status descriptor
  */
 struct ath5k_tx_status {
 	u16	ts_seqnum;
 	u16	ts_tstamp;
 	u8	ts_status;
-	u8	ts_rate;
+	u8	ts_rate[4];
+	u8	ts_retry[4];
+	u8	ts_final_idx;
 	s8	ts_rssi;
 	u8	ts_shortretry;
 	u8	ts_longretry;
@@ -354,7 +499,6 @@ enum ath5k_tx_queue_id {
 	AR5K_TX_QUEUE_ID_XR_DATA	= 9,
 };
 
-
 /*
  * Flags to set hw queue's parameters...
  */
@@ -387,7 +531,8 @@ struct ath5k_txq_info {
 
 /*
  * Transmit packet types.
- * These are not fully used inside OpenHAL yet
+ * used on tx control descriptor
+ * TODO: Use them inside base.c corectly
  */
 enum ath5k_pkt_type {
 	AR5K_PKT_TYPE_NORMAL		= 0,
@@ -430,7 +575,7 @@ enum ath5k_dmasize {
 \****************/
 
 /*
- * RX Status
+ * RX Status descriptor
  */
 struct ath5k_rx_status {
 	u16	rs_datalen;
@@ -494,34 +639,59 @@ struct ath5k_beacon_state {
 #define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10)
 
 
+/*******************************\
+  GAIN OPTIMIZATION DEFINITIONS
+\*******************************/
+
+enum ath5k_rfgain {
+	AR5K_RFGAIN_INACTIVE = 0,
+	AR5K_RFGAIN_READ_REQUESTED,
+	AR5K_RFGAIN_NEED_CHANGE,
+};
+
+#define AR5K_GAIN_CRN_FIX_BITS_5111		4
+#define AR5K_GAIN_CRN_FIX_BITS_5112		7
+#define AR5K_GAIN_CRN_MAX_FIX_BITS		AR5K_GAIN_CRN_FIX_BITS_5112
+#define AR5K_GAIN_DYN_ADJUST_HI_MARGIN		15
+#define AR5K_GAIN_DYN_ADJUST_LO_MARGIN		20
+#define AR5K_GAIN_CCK_PROBE_CORR		5
+#define AR5K_GAIN_CCK_OFDM_GAIN_DELTA		15
+#define AR5K_GAIN_STEP_COUNT			10
+#define AR5K_GAIN_PARAM_TX_CLIP			0
+#define AR5K_GAIN_PARAM_PD_90			1
+#define AR5K_GAIN_PARAM_PD_84			2
+#define AR5K_GAIN_PARAM_GAIN_SEL		3
+#define AR5K_GAIN_PARAM_MIX_ORN			0
+#define AR5K_GAIN_PARAM_PD_138			1
+#define AR5K_GAIN_PARAM_PD_137			2
+#define AR5K_GAIN_PARAM_PD_136			3
+#define AR5K_GAIN_PARAM_PD_132			4
+#define AR5K_GAIN_PARAM_PD_131			5
+#define AR5K_GAIN_PARAM_PD_130			6
+#define AR5K_GAIN_CHECK_ADJUST(_g) 		\
+	((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high)
+
+struct ath5k_gain_opt_step {
+	s16				gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS];
+	s32				gos_gain;
+};
+
+struct ath5k_gain {
+	u32			g_step_idx;
+	u32			g_current;
+	u32			g_target;
+	u32			g_low;
+	u32			g_high;
+	u32			g_f_corr;
+	u32			g_active;
+	const struct ath5k_gain_opt_step	*g_step;
+};
+
+
 /********************\
   COMMON DEFINITIONS
 \********************/
 
-/*
- * Atheros hardware descriptor
- * This is read and written to by the hardware
- */
-struct ath5k_desc {
-	u32	ds_link;	/* physical address of the next descriptor */
-	u32	ds_data;	/* physical address of data buffer (skb) */
-
-	union {
-		struct ath5k_hw_5210_tx_desc	ds_tx5210;
-		struct ath5k_hw_5212_tx_desc	ds_tx5212;
-		struct ath5k_hw_all_rx_desc	ds_rx;
-	} ud;
-} __packed;
-
-#define AR5K_RXDESC_INTREQ	0x0020
-
-#define AR5K_TXDESC_CLRDMASK	0x0001
-#define AR5K_TXDESC_NOACK	0x0002	/*[5211+]*/
-#define AR5K_TXDESC_RTSENA	0x0004
-#define AR5K_TXDESC_CTSENA	0x0008
-#define AR5K_TXDESC_INTREQ	0x0010
-#define AR5K_TXDESC_VEOL	0x0020	/*[5211+]*/
-
 #define AR5K_SLOT_TIME_9	396
 #define AR5K_SLOT_TIME_20	880
 #define AR5K_SLOT_TIME_MAX	0xffff
@@ -553,167 +723,79 @@ struct ath5k_desc {
 #define CHANNEL_MODES		CHANNEL_ALL
 
 /*
- * Used internaly in OpenHAL (ar5211.c/ar5212.c
- * for reset_tx_queue). Also see struct struct ieee80211_channel.
+ * Used internaly for reset_tx_queue).
+ * Also see struct struct ieee80211_channel.
  */
 #define IS_CHAN_XR(_c)	((_c.hw_value & CHANNEL_XR) != 0)
 #define IS_CHAN_B(_c)	((_c.hw_value & CHANNEL_B) != 0)
 
 /*
- * The following structure will be used to map 2GHz channels to
+ * The following structure is used to map 2GHz channels to
  * 5GHz Atheros channels.
+ * TODO: Clean up
  */
 struct ath5k_athchan_2ghz {
 	u32	a2_flags;
 	u16	a2_athchan;
 };
 
-/*
- * Rate definitions
- * TODO: Clean them up or move them on mac80211 -most of these infos are
- * 	 used by the rate control algorytm on MadWiFi.
- */
 
-/* Max number of rates on the rate table and what it seems
- * Atheros hardware supports */
-#define AR5K_MAX_RATES 32
+/******************\
+  RATE DEFINITIONS
+\******************/
 
 /**
- * struct ath5k_rate - rate structure
- * @valid: is this a valid rate for rate control (remove)
- * @modulation: respective mac80211 modulation
- * @rate_kbps: rate in kbit/s
- * @rate_code: hardware rate value, used in &struct ath5k_desc, on RX on
- *     &struct ath5k_rx_status.rs_rate and on TX on
- *     &struct ath5k_tx_status.ts_rate. Seems the ar5xxx harware supports
- *     up to 32 rates, indexed by 1-32. This means we really only need
- *     6 bits for the rate_code.
- * @dot11_rate: respective IEEE-802.11 rate value
- * @control_rate: index of rate assumed to be used to send control frames.
- *     This can be used to set override the value on the rate duration
- *     registers. This is only useful if we can override in the harware at
- *     what rate we want to send control frames at. Note that IEEE-802.11
- *     Ch. 9.6 (after IEEE 802.11g changes) defines the rate at which we
- *     should send ACK/CTS, if we change this value we can be breaking
- *     the spec.
+ * Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32.
  *
- * This structure is used to get the RX rate or set the TX rate on the
+ * The rate code is used to get the RX rate or set the TX rate on the
  * hardware descriptors. It is also used for internal modulation control
  * and settings.
  *
- * On RX after the &struct ath5k_desc is parsed by the appropriate
- * ah_proc_rx_desc() the respective hardware rate value is set in
- * &struct ath5k_rx_status.rs_rate. On TX the desired rate is set in
- * &struct ath5k_tx_status.ts_rate which is later used to setup the
- * &struct ath5k_desc correctly. This is the hardware rate map we are
- * aware of:
+ * This is the hardware rate map we are aware of:
  *
- * rate_code   1       2       3       4       5       6       7       8
+ * rate_code   0x01    0x02    0x03    0x04    0x05    0x06    0x07    0x08
  * rate_kbps   3000    1000    ?       ?       ?       2000    500     48000
  *
- * rate_code   9       10      11      12      13      14      15      16
+ * rate_code   0x09    0x0A    0x0B    0x0C    0x0D    0x0E    0x0F    0x10
  * rate_kbps   24000   12000   6000    54000   36000   18000   9000    ?
  *
  * rate_code   17      18      19      20      21      22      23      24
  * rate_kbps   ?       ?       ?       ?       ?       ?       ?       11000
  *
  * rate_code   25      26      27      28      29      30      31      32
- * rate_kbps   5500    2000    1000    ?       ?       ?       ?       ?
+ * rate_kbps   5500    2000    1000    11000S  5500S   2000S   ?       ?
  *
+ * "S" indicates CCK rates with short preamble.
+ *
+ * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the
+ * lowest 4 bits, so they are the same as below with a 0xF mask.
+ * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M).
+ * We handle this in ath5k_setup_bands().
  */
-struct ath5k_rate {
-	u8	valid;
-	u32	modulation;
-	u16	rate_kbps;
-	u8	rate_code;
-	u8	dot11_rate;
-	u8	control_rate;
-};
-
-/* XXX: GRR all this stuff to get leds blinking ??? (check out setcurmode) */
-struct ath5k_rate_table {
-	u16	rate_count;
-	u8	rate_code_to_index[AR5K_MAX_RATES];	/* Back-mapping */
-	struct ath5k_rate rates[AR5K_MAX_RATES];
-};
-
-/*
- * Rate tables...
- * TODO: CLEAN THIS !!!
- */
-#define AR5K_RATES_11A { 8, {					\
-	255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0,	\
-	7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255,	\
-	255, 255, 255, 255, 255, 255, 255, 255 }, {		\
-	{ 1, 0, 6000, 11, 140, 0 },		\
-	{ 1, 0, 9000, 15, 18, 0 },		\
-	{ 1, 0, 12000, 10, 152, 2 },		\
-	{ 1, 0, 18000, 14, 36, 2 },		\
-	{ 1, 0, 24000, 9, 176, 4 },		\
-	{ 1, 0, 36000, 13, 72, 4 },		\
-	{ 1, 0, 48000, 8, 96, 4 },		\
-	{ 1, 0, 54000, 12, 108, 4 } }		\
-}
-
-#define AR5K_RATES_11B { 4, {						\
-	255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,	\
-	255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,	\
-	3, 2, 1, 0, 255, 255, 255, 255 }, {				\
-	{ 1, 0, 1000, 27, 130, 0 },	\
-	{ 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 132, 1 },	\
-	{ 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 139, 1 },	\
-	{ 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 150, 1 } }	\
-}
-
-#define AR5K_RATES_11G { 12, {					\
-	255, 255, 255, 255, 255, 255, 255, 255, 10, 8, 6, 4,	\
-	11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255,	\
-	3, 2, 1, 0, 255, 255, 255, 255 }, {			\
-	{ 1, 0, 1000, 27, 2, 0 },		\
-	{ 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 4, 1 },		\
-	{ 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 11, 1 },		\
-	{ 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 22, 1 },	\
-	{ 0, 0, 6000, 11, 12, 4 },	\
-	{ 0, 0, 9000, 15, 18, 4 },	\
-	{ 1, 0, 12000, 10, 24, 6 },	\
-	{ 1, 0, 18000, 14, 36, 6 },	\
-	{ 1, 0, 24000, 9, 48, 8 },	\
-	{ 1, 0, 36000, 13, 72, 8 },	\
-	{ 1, 0, 48000, 8, 96, 8 },	\
-	{ 1, 0, 54000, 12, 108, 8 } }	\
-}
-
-#define AR5K_RATES_TURBO { 8, {					\
-	255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0,	\
-	7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255,	\
-	255, 255, 255, 255, 255, 255, 255, 255 }, {		\
-	{ 1, MODULATION_TURBO, 6000, 11, 140, 0 },	\
-	{ 1, MODULATION_TURBO, 9000, 15, 18, 0 },	\
-	{ 1, MODULATION_TURBO, 12000, 10, 152, 2 },	\
-	{ 1, MODULATION_TURBO, 18000, 14, 36, 2 },	\
-	{ 1, MODULATION_TURBO, 24000, 9, 176, 4 },	\
-	{ 1, MODULATION_TURBO, 36000, 13, 72, 4 },	\
-	{ 1, MODULATION_TURBO, 48000, 8, 96, 4 },	\
-	{ 1, MODULATION_TURBO, 54000, 12, 108, 4 } }	\
-}
+#define AR5K_MAX_RATES 32
 
-#define AR5K_RATES_XR { 12, {					\
-	255, 3, 1, 255, 255, 255, 2, 0, 10, 8, 6, 4,		\
-	11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255,	\
-	255, 255, 255, 255, 255, 255, 255, 255 }, {		\
-	{ 1, MODULATION_XR, 500, 7, 129, 0 },		\
-	{ 1, MODULATION_XR, 1000, 2, 139, 1 },		\
-	{ 1, MODULATION_XR, 2000, 6, 150, 2 },		\
-	{ 1, MODULATION_XR, 3000, 1, 150, 3 },		\
-	{ 1, 0, 6000, 11, 140, 4 },	\
-	{ 1, 0, 9000, 15, 18, 4 },	\
-	{ 1, 0, 12000, 10, 152, 6 },	\
-	{ 1, 0, 18000, 14, 36, 6 },	\
-	{ 1, 0, 24000, 9, 176, 8 },	\
-	{ 1, 0, 36000, 13, 72, 8 },	\
-	{ 1, 0, 48000, 8, 96, 8 },	\
-	{ 1, 0, 54000, 12, 108, 8 } }	\
-}
+/* B */
+#define ATH5K_RATE_CODE_1M	0x1B
+#define ATH5K_RATE_CODE_2M	0x1A
+#define ATH5K_RATE_CODE_5_5M	0x19
+#define ATH5K_RATE_CODE_11M	0x18
+/* A and G */
+#define ATH5K_RATE_CODE_6M	0x0B
+#define ATH5K_RATE_CODE_9M	0x0F
+#define ATH5K_RATE_CODE_12M	0x0A
+#define ATH5K_RATE_CODE_18M	0x0E
+#define ATH5K_RATE_CODE_24M	0x09
+#define ATH5K_RATE_CODE_36M	0x0D
+#define ATH5K_RATE_CODE_48M	0x08
+#define ATH5K_RATE_CODE_54M	0x0C
+/* XR */
+#define ATH5K_RATE_CODE_XR_500K	0x07
+#define ATH5K_RATE_CODE_XR_1M	0x02
+#define ATH5K_RATE_CODE_XR_2M	0x06
+#define ATH5K_RATE_CODE_XR_3M	0x01
+
+/* adding this flag to rate_code enables short preamble */
+#define AR5K_SET_SHORT_PREAMBLE 0x04
 
 /*
  * Crypto definitions
@@ -735,7 +817,6 @@ struct ath5k_rate_table {
 		return (false);			\
 } while (0)
 
-
 enum ath5k_ant_setting {
 	AR5K_ANT_VARIABLE	= 0,	/* variable by programming */
 	AR5K_ANT_FIXED_A	= 1,	/* fixed to 11a frequencies */
@@ -846,7 +927,8 @@ enum ath5k_power_mode {
 
 /*
  * These match net80211 definitions (not used in
- * d80211).
+ * mac80211).
+ * TODO: Clean this up
  */
 #define AR5K_LED_INIT	0 /*IEEE80211_S_INIT*/
 #define AR5K_LED_SCAN	1 /*IEEE80211_S_SCAN*/
@@ -862,7 +944,8 @@ enum ath5k_power_mode {
 /*
  * Chipset capabilities -see ath5k_hw_get_capability-
  * get_capability function is not yet fully implemented
- * in OpenHAL so most of these don't work yet...
+ * in ath5k so most of these don't work yet...
+ * TODO: Implement these & merge with _TUNE_ stuff above
  */
 enum ath5k_capability_type {
 	AR5K_CAP_REG_DMN		= 0,	/* Used to get current reg. domain id */
@@ -931,6 +1014,7 @@ struct ath5k_capabilities {
 #define AR5K_MAX_GPIO		10
 #define AR5K_MAX_RF_BANKS	8
 
+/* TODO: Clean up and merge with ath5k_softc */
 struct ath5k_hw {
 	u32			ah_magic;
 
@@ -939,7 +1023,7 @@ struct ath5k_hw {
 
 	enum ath5k_int		ah_imr;
 
-	enum ieee80211_if_types	ah_op_mode;
+	enum nl80211_iftype	ah_op_mode;
 	enum ath5k_power_mode	ah_power_mode;
 	struct ieee80211_channel ah_current_channel;
 	bool			ah_turbo;
@@ -1023,11 +1107,13 @@ struct ath5k_hw {
 	/*
 	 * Function pointers
 	 */
+	int (*ah_setup_rx_desc)(struct ath5k_hw *ah, struct ath5k_desc *desc,
+				u32 size, unsigned int flags);
 	int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
 		unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int,
 		unsigned int, unsigned int, unsigned int, unsigned int,
 		unsigned int, unsigned int, unsigned int);
-	int (*ah_setup_xtx_desc)(struct ath5k_hw *, struct ath5k_desc *,
+	int (*ah_setup_mrr_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
 		unsigned int, unsigned int, unsigned int, unsigned int,
 		unsigned int, unsigned int);
 	int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
@@ -1040,33 +1126,38 @@ struct ath5k_hw {
  * Prototypes
  */
 
-/* General Functions */
-extern int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, bool is_set);
 /* Attach/Detach Functions */
 extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version);
-extern const struct ath5k_rate_table *ath5k_hw_get_rate_table(struct ath5k_hw *ah, unsigned int mode);
 extern void ath5k_hw_detach(struct ath5k_hw *ah);
+
 /* Reset Functions */
-extern int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, struct ieee80211_channel *channel, bool change_channel);
+extern int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial);
+extern int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, struct ieee80211_channel *channel, bool change_channel);
 /* Power management functions */
 extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration);
+
 /* DMA Related Functions */
-extern void ath5k_hw_start_rx(struct ath5k_hw *ah);
+extern void ath5k_hw_start_rx_dma(struct ath5k_hw *ah);
 extern int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah);
-extern u32 ath5k_hw_get_rx_buf(struct ath5k_hw *ah);
-extern void ath5k_hw_put_rx_buf(struct ath5k_hw *ah, u32 phys_addr);
-extern int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue);
+extern u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah);
+extern void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr);
+extern int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue);
 extern int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue);
-extern u32 ath5k_hw_get_tx_buf(struct ath5k_hw *ah, unsigned int queue);
-extern int ath5k_hw_put_tx_buf(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr);
+extern u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue);
+extern int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue,
+				u32 phys_addr);
 extern int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase);
 /* Interrupt handling */
 extern bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah);
 extern int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask);
-extern enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask);
+extern enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum
+ath5k_int new_mask);
 extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ieee80211_low_level_stats *stats);
+
 /* EEPROM access functions */
-extern int ath5k_hw_set_regdomain(struct ath5k_hw *ah, u16 regdomain);
+extern int ath5k_eeprom_init(struct ath5k_hw *ah);
+extern int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac);
+
 /* Protocol Control Unit Functions */
 extern int ath5k_hw_set_opmode(struct ath5k_hw *ah);
 /* BSSID Functions */
@@ -1076,14 +1167,14 @@ extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc
 extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
 /* Receive start/stop functions */
 extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah);
-extern void ath5k_hw_stop_pcu_recv(struct ath5k_hw *ah);
+extern void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah);
 /* RX Filter functions */
 extern void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1);
-extern int ath5k_hw_set_mcast_filterindex(struct ath5k_hw *ah, u32 index);
+extern int ath5k_hw_set_mcast_filter_idx(struct ath5k_hw *ah, u32 index);
 extern int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index);
 extern u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah);
 extern void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter);
-/* Beacon related functions */
+/* Beacon control functions */
 extern u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah);
 extern u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah);
 extern void ath5k_hw_reset_tsf(struct ath5k_hw *ah);
@@ -1105,61 +1196,129 @@ extern int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry);
 extern int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry);
 extern int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, const struct ieee80211_key_conf *key, const u8 *mac);
 extern int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac);
+
 /* Queue Control Unit, DFS Control Unit Functions */
-extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, struct ath5k_txq_info *queue_info);
-extern int ath5k_hw_setup_tx_queueprops(struct ath5k_hw *ah, int queue, const struct ath5k_txq_info *queue_info);
 extern int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, struct ath5k_txq_info *queue_info);
+extern int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue,
+				const struct ath5k_txq_info *queue_info);
+extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah,
+				enum ath5k_tx_queue queue_type,
+				struct ath5k_txq_info *queue_info);
+extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue);
 extern void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue);
 extern int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue);
-extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue);
-extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time);
 extern unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah);
+extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time);
+
 /* Hardware Descriptor Functions */
-extern int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, u32 size, unsigned int flags);
+extern int ath5k_hw_init_desc_functions(struct ath5k_hw *ah);
+
 /* GPIO Functions */
 extern void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state);
-extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio);
 extern int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio);
+extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio);
 extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio);
 extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val);
 extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level);
+
 /* Misc functions */
+int ath5k_hw_set_capabilities(struct ath5k_hw *ah);
 extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result);
-
+extern int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id);
+extern int ath5k_hw_disable_pspoll(struct ath5k_hw *ah);
 
 /* Initial register settings functions */
 extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel);
+
 /* Initialize RF */
 extern int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int mode);
 extern int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq);
 extern enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah);
 extern int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah);
-
-
 /* PHY/RF channel functions */
 extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags);
 extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel);
 /* PHY calibration */
 extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel);
-extern int ath5k_hw_phy_disable(struct ath5k_hw *ah);
+extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
 /* Misc PHY functions */
 extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan);
 extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant);
 extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah);
-extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
+extern int ath5k_hw_phy_disable(struct ath5k_hw *ah);
 /* TX power setup */
 extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int txpower);
 extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power);
 
+/*
+ * Functions used internaly
+ */
 
+/*
+ * Translate usec to hw clock units
+ */
+static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo)
+{
+	return turbo ? (usec * 80) : (usec * 40);
+}
+
+/*
+ * Translate hw clock units to usec
+ */
+static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo)
+{
+	return turbo ? (clock / 80) : (clock / 40);
+}
+
+/*
+ * Read from a register
+ */
 static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
 {
 	return ioread32(ah->ah_iobase + reg);
 }
 
+/*
+ * Write to a register
+ */
 static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
 {
 	iowrite32(val, ah->ah_iobase + reg);
 }
 
+#if defined(_ATH5K_RESET) || defined(_ATH5K_PHY)
+/*
+ * Check if a register write has been completed
+ */
+static int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag,
+		u32 val, bool is_set)
+{
+	int i;
+	u32 data;
+
+	for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) {
+		data = ath5k_hw_reg_read(ah, reg);
+		if (is_set && (data & flag))
+			break;
+		else if ((data & flag) == val)
+			break;
+		udelay(15);
+	}
+
+	return (i <= 0) ? -EAGAIN : 0;
+}
+#endif
+
+static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits)
+{
+	u32 retval = 0, bit, i;
+
+	for (i = 0; i < bits; i++) {
+		bit = (val >> i) & 1;
+		retval = (retval << 1) | bit;
+	}
+
+	return retval;
+}
+
 #endif
diff --git a/drivers/net/wireless/ath5k/attach.c b/drivers/net/wireless/ath5k/attach.c
new file mode 100644
index 00000000000..51d569883cd
--- /dev/null
+++ b/drivers/net/wireless/ath5k/attach.c
@@ -0,0 +1,359 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*************************************\
+* Attach/Detach Functions and helpers *
+\*************************************/
+
+#include <linux/pci.h>
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/**
+ * ath5k_hw_post - Power On Self Test helper function
+ *
+ * @ah: The &struct ath5k_hw
+ */
+static int ath5k_hw_post(struct ath5k_hw *ah)
+{
+
+	int i, c;
+	u16 cur_reg;
+	u16 regs[2] = {AR5K_STA_ID0, AR5K_PHY(8)};
+	u32 var_pattern;
+	u32 static_pattern[4] = {
+		0x55555555,	0xaaaaaaaa,
+		0x66666666,	0x99999999
+	};
+	u32 init_val;
+	u32 cur_val;
+
+	for (c = 0; c < 2; c++) {
+
+		cur_reg = regs[c];
+
+		/* Save previous value */
+		init_val = ath5k_hw_reg_read(ah, cur_reg);
+
+		for (i = 0; i < 256; i++) {
+			var_pattern = i << 16 | i;
+			ath5k_hw_reg_write(ah, var_pattern, cur_reg);
+			cur_val = ath5k_hw_reg_read(ah, cur_reg);
+
+			if (cur_val != var_pattern) {
+				ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n");
+				return -EAGAIN;
+			}
+
+			/* Found on ndiswrapper dumps */
+			var_pattern = 0x0039080f;
+			ath5k_hw_reg_write(ah, var_pattern, cur_reg);
+		}
+
+		for (i = 0; i < 4; i++) {
+			var_pattern = static_pattern[i];
+			ath5k_hw_reg_write(ah, var_pattern, cur_reg);
+			cur_val = ath5k_hw_reg_read(ah, cur_reg);
+
+			if (cur_val != var_pattern) {
+				ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n");
+				return -EAGAIN;
+			}
+
+			/* Found on ndiswrapper dumps */
+			var_pattern = 0x003b080f;
+			ath5k_hw_reg_write(ah, var_pattern, cur_reg);
+		}
+
+		/* Restore previous value */
+		ath5k_hw_reg_write(ah, init_val, cur_reg);
+
+	}
+
+	return 0;
+
+}
+
+/**
+ * ath5k_hw_attach - Check if hw is supported and init the needed structs
+ *
+ * @sc: The &struct ath5k_softc we got from the driver's attach function
+ * @mac_version: The mac version id (check out ath5k.h) based on pci id
+ *
+ * Check if the device is supported, perform a POST and initialize the needed
+ * structs. Returns -ENOMEM if we don't have memory for the needed structs,
+ * -ENODEV if the device is not supported or prints an error msg if something
+ * else went wrong.
+ */
+struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
+{
+	struct ath5k_hw *ah;
+	struct pci_dev *pdev = sc->pdev;
+	u8 mac[ETH_ALEN];
+	int ret;
+	u32 srev;
+
+	/*If we passed the test malloc a ath5k_hw struct*/
+	ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL);
+	if (ah == NULL) {
+		ret = -ENOMEM;
+		ATH5K_ERR(sc, "out of memory\n");
+		goto err;
+	}
+
+	ah->ah_sc = sc;
+	ah->ah_iobase = sc->iobase;
+
+	/*
+	 * HW information
+	 */
+	ah->ah_op_mode = NL80211_IFTYPE_STATION;
+	ah->ah_radar.r_enabled = AR5K_TUNE_RADAR_ALERT;
+	ah->ah_turbo = false;
+	ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER;
+	ah->ah_imr = 0;
+	ah->ah_atim_window = 0;
+	ah->ah_aifs = AR5K_TUNE_AIFS;
+	ah->ah_cw_min = AR5K_TUNE_CWMIN;
+	ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY;
+	ah->ah_software_retry = false;
+	ah->ah_ant_diversity = AR5K_TUNE_ANT_DIVERSITY;
+
+	/*
+	 * Set the mac version based on the pci id
+	 */
+	ah->ah_version = mac_version;
+
+	/*Fill the ath5k_hw struct with the needed functions*/
+	ret = ath5k_hw_init_desc_functions(ah);
+	if (ret)
+		goto err_free;
+
+	/* Bring device out of sleep and reset it's units */
+	ret = ath5k_hw_nic_wakeup(ah, CHANNEL_B, true);
+	if (ret)
+		goto err_free;
+
+	/* Get MAC, PHY and RADIO revisions */
+	srev = ath5k_hw_reg_read(ah, AR5K_SREV);
+	ah->ah_mac_srev = srev;
+	ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER);
+	ah->ah_mac_revision = AR5K_REG_MS(srev, AR5K_SREV_REV);
+	ah->ah_phy_revision = ath5k_hw_reg_read(ah, AR5K_PHY_CHIP_ID) &
+			0xffffffff;
+	ah->ah_radio_5ghz_revision = ath5k_hw_radio_revision(ah,
+			CHANNEL_5GHZ);
+	ah->ah_phy = AR5K_PHY(0);
+
+	/* Try to identify radio chip based on it's srev */
+	switch (ah->ah_radio_5ghz_revision & 0xf0) {
+	case AR5K_SREV_RAD_5111:
+		ah->ah_radio = AR5K_RF5111;
+		ah->ah_single_chip = false;
+		ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
+							CHANNEL_2GHZ);
+		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5111;
+		break;
+	case AR5K_SREV_RAD_5112:
+	case AR5K_SREV_RAD_2112:
+		ah->ah_radio = AR5K_RF5112;
+		ah->ah_single_chip = false;
+		ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
+							CHANNEL_2GHZ);
+		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112;
+		break;
+	case AR5K_SREV_RAD_2413:
+		ah->ah_radio = AR5K_RF2413;
+		ah->ah_single_chip = true;
+		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413;
+		break;
+	case AR5K_SREV_RAD_5413:
+		ah->ah_radio = AR5K_RF5413;
+		ah->ah_single_chip = true;
+		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
+		break;
+	case AR5K_SREV_RAD_2316:
+		ah->ah_radio = AR5K_RF2316;
+		ah->ah_single_chip = true;
+		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2316;
+		break;
+	case AR5K_SREV_RAD_2317:
+		ah->ah_radio = AR5K_RF2317;
+		ah->ah_single_chip = true;
+		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2317;
+		break;
+	case AR5K_SREV_RAD_5424:
+		if (ah->ah_mac_version == AR5K_SREV_AR2425 ||
+		ah->ah_mac_version == AR5K_SREV_AR2417){
+			ah->ah_radio = AR5K_RF2425;
+			ah->ah_single_chip = true;
+			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425;
+		} else {
+			ah->ah_radio = AR5K_RF5413;
+			ah->ah_single_chip = true;
+			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
+		}
+		break;
+	default:
+		/* Identify radio based on mac/phy srev */
+		if (ah->ah_version == AR5K_AR5210) {
+			ah->ah_radio = AR5K_RF5110;
+			ah->ah_single_chip = false;
+		} else if (ah->ah_version == AR5K_AR5211) {
+			ah->ah_radio = AR5K_RF5111;
+			ah->ah_single_chip = false;
+			ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
+								CHANNEL_2GHZ);
+		} else if (ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4) ||
+		ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4) ||
+		ah->ah_phy_revision == AR5K_SREV_PHY_2425) {
+			ah->ah_radio = AR5K_RF2425;
+			ah->ah_single_chip = true;
+			ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2425;
+			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425;
+		} else if (srev == AR5K_SREV_AR5213A &&
+		ah->ah_phy_revision == AR5K_SREV_PHY_2112B) {
+			ah->ah_radio = AR5K_RF5112;
+			ah->ah_single_chip = false;
+			ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2112B;
+		} else if (ah->ah_mac_version == (AR5K_SREV_AR2415 >> 4)) {
+			ah->ah_radio = AR5K_RF2316;
+			ah->ah_single_chip = true;
+			ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2316;
+			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2316;
+		} else if (ah->ah_mac_version == (AR5K_SREV_AR5414 >> 4) ||
+		ah->ah_phy_revision == AR5K_SREV_PHY_5413) {
+			ah->ah_radio = AR5K_RF5413;
+			ah->ah_single_chip = true;
+			ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_5413;
+			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
+		} else if (ah->ah_mac_version == (AR5K_SREV_AR2414 >> 4) ||
+		ah->ah_phy_revision == AR5K_SREV_PHY_2413) {
+			ah->ah_radio = AR5K_RF2413;
+			ah->ah_single_chip = true;
+			ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2413;
+			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413;
+		} else {
+			ATH5K_ERR(sc, "Couldn't identify radio revision.\n");
+			ret = -ENODEV;
+			goto err_free;
+		}
+	}
+
+
+	/* Return on unsuported chips (unsupported eeprom etc) */
+	if ((srev >= AR5K_SREV_AR5416) &&
+	(srev < AR5K_SREV_AR2425)) {
+		ATH5K_ERR(sc, "Device not yet supported.\n");
+		ret = -ENODEV;
+		goto err_free;
+	}
+
+	/*
+	 * Write PCI-E power save settings
+	 */
+	if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) {
+		ath5k_hw_reg_write(ah, 0x9248fc00, AR5K_PCIE_SERDES);
+		ath5k_hw_reg_write(ah, 0x24924924, AR5K_PCIE_SERDES);
+		/* Shut off RX when elecidle is asserted */
+		ath5k_hw_reg_write(ah, 0x28000039, AR5K_PCIE_SERDES);
+		ath5k_hw_reg_write(ah, 0x53160824, AR5K_PCIE_SERDES);
+		/* TODO: EEPROM work */
+		ath5k_hw_reg_write(ah, 0xe5980579, AR5K_PCIE_SERDES);
+		/* Shut off PLL and CLKREQ active in L1 */
+		ath5k_hw_reg_write(ah, 0x001defff, AR5K_PCIE_SERDES);
+		/* Preserce other settings */
+		ath5k_hw_reg_write(ah, 0x1aaabe40, AR5K_PCIE_SERDES);
+		ath5k_hw_reg_write(ah, 0xbe105554, AR5K_PCIE_SERDES);
+		ath5k_hw_reg_write(ah, 0x000e3007, AR5K_PCIE_SERDES);
+		/* Reset SERDES to load new settings */
+		ath5k_hw_reg_write(ah, 0x00000000, AR5K_PCIE_SERDES_RESET);
+		mdelay(1);
+	}
+
+	/*
+	 * POST
+	 */
+	ret = ath5k_hw_post(ah);
+	if (ret)
+		goto err_free;
+
+	/* Enable pci core retry fix on Hainan (5213A) and later chips */
+	if (srev >= AR5K_SREV_AR5213A)
+		ath5k_hw_reg_write(ah, AR5K_PCICFG_RETRY_FIX, AR5K_PCICFG);
+
+	/*
+	 * Get card capabilities, calibration values etc
+	 * TODO: EEPROM work
+	 */
+	ret = ath5k_eeprom_init(ah);
+	if (ret) {
+		ATH5K_ERR(sc, "unable to init EEPROM\n");
+		goto err_free;
+	}
+
+	/* Get misc capabilities */
+	ret = ath5k_hw_set_capabilities(ah);
+	if (ret) {
+		ATH5K_ERR(sc, "unable to get device capabilities: 0x%04x\n",
+			sc->pdev->device);
+		goto err_free;
+	}
+
+	/* Set MAC address */
+	ret = ath5k_eeprom_read_mac(ah, mac);
+	if (ret) {
+		ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n",
+			sc->pdev->device);
+		goto err_free;
+	}
+
+	ath5k_hw_set_lladdr(ah, mac);
+	/* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */
+	memset(ah->ah_bssid, 0xff, ETH_ALEN);
+	ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+	ath5k_hw_set_opmode(ah);
+
+	ath5k_hw_set_rfgain_opt(ah);
+
+	return ah;
+err_free:
+	kfree(ah);
+err:
+	return ERR_PTR(ret);
+}
+
+/**
+ * ath5k_hw_detach - Free the ath5k_hw struct
+ *
+ * @ah: The &struct ath5k_hw
+ */
+void ath5k_hw_detach(struct ath5k_hw *ah)
+{
+	ATH5K_TRACE(ah->ah_sc);
+
+	__set_bit(ATH_STAT_INVALID, ah->ah_sc->status);
+
+	if (ah->ah_rf_banks != NULL)
+		kfree(ah->ah_rf_banks);
+
+	/* assume interrupts are down */
+	kfree(ah);
+}
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 0676c6d8438..9b95c4049b3 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -72,7 +72,7 @@ MODULE_AUTHOR("Nick Kossifidis");
 MODULE_DESCRIPTION("Support for 5xxx series of Atheros 802.11 wireless LAN cards.");
 MODULE_SUPPORTED_DEVICE("Atheros 5xxx WLAN cards");
 MODULE_LICENSE("Dual BSD/GPL");
-MODULE_VERSION("0.5.0 (EXPERIMENTAL)");
+MODULE_VERSION("0.6.0 (EXPERIMENTAL)");
 
 
 /* Known PCI ids */
@@ -93,45 +93,94 @@ static struct pci_device_id ath5k_pci_id_table[] __devinitdata = {
 	{ PCI_VDEVICE(ATHEROS, 0x0019), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
 	{ PCI_VDEVICE(ATHEROS, 0x001a), .driver_data = AR5K_AR5212 }, /* 2413 Griffin-lite */
 	{ PCI_VDEVICE(ATHEROS, 0x001b), .driver_data = AR5K_AR5212 }, /* 5413 Eagle */
-	{ PCI_VDEVICE(ATHEROS, 0x001c), .driver_data = AR5K_AR5212 }, /* 5424 Condor (PCI-E)*/
+	{ PCI_VDEVICE(ATHEROS, 0x001c), .driver_data = AR5K_AR5212 }, /* PCI-E cards */
+	{ PCI_VDEVICE(ATHEROS, 0x001d), .driver_data = AR5K_AR5212 }, /* 2417 Nala */
 	{ 0 }
 };
 MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);
 
 /* Known SREVs */
 static struct ath5k_srev_name srev_names[] = {
-	{ "5210",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5210 },
-	{ "5311",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5311 },
-	{ "5311A",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5311A },
-	{ "5311B",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5311B },
-	{ "5211",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5211 },
-	{ "5212",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5212 },
-	{ "5213",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5213 },
-	{ "5213A",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5213A },
-	{ "2413",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR2413 },
-	{ "2414",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR2414 },
-	{ "2424",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR2424 },
-	{ "5424",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5424 },
-	{ "5413",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5413 },
-	{ "5414",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5414 },
-	{ "5416",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5416 },
-	{ "5418",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5418 },
-	{ "2425",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR2425 },
-	{ "xxxxx",	AR5K_VERSION_VER,	AR5K_SREV_UNKNOWN },
+	{ "5210",	AR5K_VERSION_MAC,	AR5K_SREV_AR5210 },
+	{ "5311",	AR5K_VERSION_MAC,	AR5K_SREV_AR5311 },
+	{ "5311A",	AR5K_VERSION_MAC,	AR5K_SREV_AR5311A },
+	{ "5311B",	AR5K_VERSION_MAC,	AR5K_SREV_AR5311B },
+	{ "5211",	AR5K_VERSION_MAC,	AR5K_SREV_AR5211 },
+	{ "5212",	AR5K_VERSION_MAC,	AR5K_SREV_AR5212 },
+	{ "5213",	AR5K_VERSION_MAC,	AR5K_SREV_AR5213 },
+	{ "5213A",	AR5K_VERSION_MAC,	AR5K_SREV_AR5213A },
+	{ "2413",	AR5K_VERSION_MAC,	AR5K_SREV_AR2413 },
+	{ "2414",	AR5K_VERSION_MAC,	AR5K_SREV_AR2414 },
+	{ "5424",	AR5K_VERSION_MAC,	AR5K_SREV_AR5424 },
+	{ "5413",	AR5K_VERSION_MAC,	AR5K_SREV_AR5413 },
+	{ "5414",	AR5K_VERSION_MAC,	AR5K_SREV_AR5414 },
+	{ "2415",	AR5K_VERSION_MAC,	AR5K_SREV_AR2415 },
+	{ "5416",	AR5K_VERSION_MAC,	AR5K_SREV_AR5416 },
+	{ "5418",	AR5K_VERSION_MAC,	AR5K_SREV_AR5418 },
+	{ "2425",	AR5K_VERSION_MAC,	AR5K_SREV_AR2425 },
+	{ "2417",	AR5K_VERSION_MAC,	AR5K_SREV_AR2417 },
+	{ "xxxxx",	AR5K_VERSION_MAC,	AR5K_SREV_UNKNOWN },
 	{ "5110",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5110 },
 	{ "5111",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5111 },
+	{ "5111A",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5111A },
 	{ "2111",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2111 },
 	{ "5112",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5112 },
 	{ "5112A",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5112A },
+	{ "5112B",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5112B },
 	{ "2112",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2112 },
 	{ "2112A",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2112A },
-	{ "SChip",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_SC0 },
-	{ "SChip",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_SC1 },
-	{ "SChip",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_SC2 },
+	{ "2112B",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2112B },
+	{ "2413",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2413 },
+	{ "5413",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5413 },
+	{ "2316",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2316 },
+	{ "2317",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2317 },
+	{ "5424",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5424 },
 	{ "5133",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5133 },
 	{ "xxxxx",	AR5K_VERSION_RAD,	AR5K_SREV_UNKNOWN },
 };
 
+static struct ieee80211_rate ath5k_rates[] = {
+	{ .bitrate = 10,
+	  .hw_value = ATH5K_RATE_CODE_1M, },
+	{ .bitrate = 20,
+	  .hw_value = ATH5K_RATE_CODE_2M,
+	  .hw_value_short = ATH5K_RATE_CODE_2M | AR5K_SET_SHORT_PREAMBLE,
+	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 55,
+	  .hw_value = ATH5K_RATE_CODE_5_5M,
+	  .hw_value_short = ATH5K_RATE_CODE_5_5M | AR5K_SET_SHORT_PREAMBLE,
+	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 110,
+	  .hw_value = ATH5K_RATE_CODE_11M,
+	  .hw_value_short = ATH5K_RATE_CODE_11M | AR5K_SET_SHORT_PREAMBLE,
+	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 60,
+	  .hw_value = ATH5K_RATE_CODE_6M,
+	  .flags = 0 },
+	{ .bitrate = 90,
+	  .hw_value = ATH5K_RATE_CODE_9M,
+	  .flags = 0 },
+	{ .bitrate = 120,
+	  .hw_value = ATH5K_RATE_CODE_12M,
+	  .flags = 0 },
+	{ .bitrate = 180,
+	  .hw_value = ATH5K_RATE_CODE_18M,
+	  .flags = 0 },
+	{ .bitrate = 240,
+	  .hw_value = ATH5K_RATE_CODE_24M,
+	  .flags = 0 },
+	{ .bitrate = 360,
+	  .hw_value = ATH5K_RATE_CODE_36M,
+	  .flags = 0 },
+	{ .bitrate = 480,
+	  .hw_value = ATH5K_RATE_CODE_48M,
+	  .flags = 0 },
+	{ .bitrate = 540,
+	  .hw_value = ATH5K_RATE_CODE_54M,
+	  .flags = 0 },
+	/* XR missing */
+};
+
 /*
  * Prototypes - PCI stack related functions
  */
@@ -162,7 +211,8 @@ static struct pci_driver ath5k_pci_driver = {
  * Prototypes - MAC 802.11 stack related functions
  */
 static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
-static int ath5k_reset(struct ieee80211_hw *hw);
+static int ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel);
+static int ath5k_reset_wake(struct ath5k_softc *sc);
 static int ath5k_start(struct ieee80211_hw *hw);
 static void ath5k_stop(struct ieee80211_hw *hw);
 static int ath5k_add_interface(struct ieee80211_hw *hw,
@@ -218,20 +268,16 @@ static void 	ath5k_detach(struct pci_dev *pdev,
 			struct ieee80211_hw *hw);
 /* Channel/mode setup */
 static inline short ath5k_ieee2mhz(short chan);
-static unsigned int ath5k_copy_rates(struct ieee80211_rate *rates,
-				const struct ath5k_rate_table *rt,
-				unsigned int max);
 static unsigned int ath5k_copy_channels(struct ath5k_hw *ah,
 				struct ieee80211_channel *channels,
 				unsigned int mode,
 				unsigned int max);
-static int 	ath5k_getchannels(struct ieee80211_hw *hw);
+static int 	ath5k_setup_bands(struct ieee80211_hw *hw);
 static int 	ath5k_chan_set(struct ath5k_softc *sc,
 				struct ieee80211_channel *chan);
 static void	ath5k_setcurmode(struct ath5k_softc *sc,
 				unsigned int mode);
 static void	ath5k_mode_setup(struct ath5k_softc *sc);
-static void	ath5k_set_total_hw_rates(struct ath5k_softc *sc);
 
 /* Descriptor setup */
 static int	ath5k_desc_alloc(struct ath5k_softc *sc,
@@ -351,7 +397,11 @@ ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val)
 	for (i = 0; i < ARRAY_SIZE(srev_names); i++) {
 		if (srev_names[i].sr_type != type)
 			continue;
-		if ((val & 0xff) < srev_names[i + 1].sr_val) {
+
+		if ((val & 0xf0) == srev_names[i].sr_val)
+			name = srev_names[i].sr_name;
+
+		if ((val & 0xff) == srev_names[i].sr_val) {
 			name = srev_names[i].sr_name;
 			break;
 		}
@@ -446,6 +496,12 @@ ath5k_pci_probe(struct pci_dev *pdev,
 	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
 		    IEEE80211_HW_SIGNAL_DBM |
 		    IEEE80211_HW_NOISE_DBM;
+
+	hw->wiphy->interface_modes =
+		BIT(NL80211_IFTYPE_STATION) |
+		BIT(NL80211_IFTYPE_ADHOC) |
+		BIT(NL80211_IFTYPE_MESH_POINT);
+
 	hw->extra_tx_headroom = 2;
 	hw->channel_change_time = 5000;
 	sc = hw->priv;
@@ -462,7 +518,7 @@ ath5k_pci_probe(struct pci_dev *pdev,
 
 	sc->iobase = mem; /* So we can unmap it on detach */
 	sc->cachelsz = csz * sizeof(u32); /* convert to bytes */
-	sc->opmode = IEEE80211_IF_TYPE_STA;
+	sc->opmode = NL80211_IFTYPE_STATION;
 	mutex_init(&sc->lock);
 	spin_lock_init(&sc->rxbuflock);
 	spin_lock_init(&sc->txbuflock);
@@ -485,13 +541,19 @@ ath5k_pci_probe(struct pci_dev *pdev,
 		goto err_irq;
 	}
 
+	/* set up multi-rate retry capabilities */
+	if (sc->ah->ah_version == AR5K_AR5212) {
+		hw->max_altrates = 3;
+		hw->max_altrate_tries = 11;
+	}
+
 	/* Finish private driver data initialization */
 	ret = ath5k_attach(pdev, hw);
 	if (ret)
 		goto err_ah;
 
 	ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
-			ath5k_chip_name(AR5K_VERSION_VER,sc->ah->ah_mac_srev),
+			ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev),
 					sc->ah->ah_mac_srev,
 					sc->ah->ah_phy_revision);
 
@@ -646,7 +708,6 @@ err_no_irq:
 #endif /* CONFIG_PM */
 
 
-
 /***********************\
 * Driver Initialization *
 \***********************/
@@ -669,7 +730,7 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
 	 * return false w/o doing anything.  MAC's that do
 	 * support it will return true w/o doing anything.
 	 */
-	ret = ah->ah_setup_xtx_desc(ah, NULL, 0, 0, 0, 0, 0, 0);
+	ret = ah->ah_setup_mrr_tx_desc(ah, NULL, 0, 0, 0, 0, 0, 0);
 	if (ret < 0)
 		goto err;
 	if (ret > 0)
@@ -688,15 +749,12 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
 	 * on settings like the phy mode and regulatory
 	 * domain restrictions.
 	 */
-	ret = ath5k_getchannels(hw);
+	ret = ath5k_setup_bands(hw);
 	if (ret) {
 		ATH5K_ERR(sc, "can't get channels\n");
 		goto err;
 	}
 
-	/* Set *_rates so we can map hw rate index */
-	ath5k_set_total_hw_rates(sc);
-
 	/* NB: setup here so ath5k_rate_update is happy */
 	if (test_bit(AR5K_MODE_11A, ah->ah_modes))
 		ath5k_setcurmode(sc, AR5K_MODE_11A);
@@ -813,27 +871,6 @@ ath5k_ieee2mhz(short chan)
 }
 
 static unsigned int
-ath5k_copy_rates(struct ieee80211_rate *rates,
-		const struct ath5k_rate_table *rt,
-		unsigned int max)
-{
-	unsigned int i, count;
-
-	if (rt == NULL)
-		return 0;
-
-	for (i = 0, count = 0; i < rt->rate_count && max > 0; i++) {
-		rates[count].bitrate = rt->rates[i].rate_kbps / 100;
-		rates[count].hw_value = rt->rates[i].rate_code;
-		rates[count].flags = rt->rates[i].modulation;
-		count++;
-		max--;
-	}
-
-	return count;
-}
-
-static unsigned int
 ath5k_copy_channels(struct ath5k_hw *ah,
 		struct ieee80211_channel *channels,
 		unsigned int mode,
@@ -895,74 +932,97 @@ ath5k_copy_channels(struct ath5k_hw *ah,
 	return count;
 }
 
+static void
+ath5k_setup_rate_idx(struct ath5k_softc *sc, struct ieee80211_supported_band *b)
+{
+	u8 i;
+
+	for (i = 0; i < AR5K_MAX_RATES; i++)
+		sc->rate_idx[b->band][i] = -1;
+
+	for (i = 0; i < b->n_bitrates; i++) {
+		sc->rate_idx[b->band][b->bitrates[i].hw_value] = i;
+		if (b->bitrates[i].hw_value_short)
+			sc->rate_idx[b->band][b->bitrates[i].hw_value_short] = i;
+	}
+}
+
 static int
-ath5k_getchannels(struct ieee80211_hw *hw)
+ath5k_setup_bands(struct ieee80211_hw *hw)
 {
 	struct ath5k_softc *sc = hw->priv;
 	struct ath5k_hw *ah = sc->ah;
-	struct ieee80211_supported_band *sbands = sc->sbands;
-	const struct ath5k_rate_table *hw_rates;
-	unsigned int max_r, max_c, count_r, count_c;
-	int mode2g = AR5K_MODE_11G;
+	struct ieee80211_supported_band *sband;
+	int max_c, count_c = 0;
+	int i;
 
 	BUILD_BUG_ON(ARRAY_SIZE(sc->sbands) < IEEE80211_NUM_BANDS);
-
-	max_r = ARRAY_SIZE(sc->rates);
 	max_c = ARRAY_SIZE(sc->channels);
-	count_r = count_c = 0;
 
 	/* 2GHz band */
-	if (!test_bit(AR5K_MODE_11G, sc->ah->ah_capabilities.cap_mode)) {
-		mode2g = AR5K_MODE_11B;
-		if (!test_bit(AR5K_MODE_11B,
-			sc->ah->ah_capabilities.cap_mode))
-			mode2g = -1;
-	}
+	sband = &sc->sbands[IEEE80211_BAND_2GHZ];
+	sband->band = IEEE80211_BAND_2GHZ;
+	sband->bitrates = &sc->rates[IEEE80211_BAND_2GHZ][0];
 
-	if (mode2g > 0) {
-		struct ieee80211_supported_band *sband =
-			&sbands[IEEE80211_BAND_2GHZ];
+	if (test_bit(AR5K_MODE_11G, sc->ah->ah_capabilities.cap_mode)) {
+		/* G mode */
+		memcpy(sband->bitrates, &ath5k_rates[0],
+		       sizeof(struct ieee80211_rate) * 12);
+		sband->n_bitrates = 12;
 
-		sband->bitrates = sc->rates;
 		sband->channels = sc->channels;
-
-		sband->band = IEEE80211_BAND_2GHZ;
 		sband->n_channels = ath5k_copy_channels(ah, sband->channels,
-					mode2g, max_c);
-
-		hw_rates = ath5k_hw_get_rate_table(ah, mode2g);
-		sband->n_bitrates = ath5k_copy_rates(sband->bitrates,
-					hw_rates, max_r);
+					AR5K_MODE_11G, max_c);
 
+		hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
 		count_c = sband->n_channels;
-		count_r = sband->n_bitrates;
+		max_c -= count_c;
+	} else if (test_bit(AR5K_MODE_11B, sc->ah->ah_capabilities.cap_mode)) {
+		/* B mode */
+		memcpy(sband->bitrates, &ath5k_rates[0],
+		       sizeof(struct ieee80211_rate) * 4);
+		sband->n_bitrates = 4;
+
+		/* 5211 only supports B rates and uses 4bit rate codes
+		 * (e.g normally we have 0x1B for 1M, but on 5211 we have 0x0B)
+		 * fix them up here:
+		 */
+		if (ah->ah_version == AR5K_AR5211) {
+			for (i = 0; i < 4; i++) {
+				sband->bitrates[i].hw_value =
+					sband->bitrates[i].hw_value & 0xF;
+				sband->bitrates[i].hw_value_short =
+					sband->bitrates[i].hw_value_short & 0xF;
+			}
+		}
 
-		hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
+		sband->channels = sc->channels;
+		sband->n_channels = ath5k_copy_channels(ah, sband->channels,
+					AR5K_MODE_11B, max_c);
 
-		max_r -= count_r;
+		hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
+		count_c = sband->n_channels;
 		max_c -= count_c;
-
 	}
+	ath5k_setup_rate_idx(sc, sband);
 
-	/* 5GHz band */
-
+	/* 5GHz band, A mode */
 	if (test_bit(AR5K_MODE_11A, sc->ah->ah_capabilities.cap_mode)) {
-		struct ieee80211_supported_band *sband =
-			&sbands[IEEE80211_BAND_5GHZ];
+		sband = &sc->sbands[IEEE80211_BAND_5GHZ];
+		sband->band = IEEE80211_BAND_5GHZ;
+		sband->bitrates = &sc->rates[IEEE80211_BAND_5GHZ][0];
 
-		sband->bitrates = &sc->rates[count_r];
-		sband->channels = &sc->channels[count_c];
+		memcpy(sband->bitrates, &ath5k_rates[4],
+		       sizeof(struct ieee80211_rate) * 8);
+		sband->n_bitrates = 8;
 
-		sband->band = IEEE80211_BAND_5GHZ;
+		sband->channels = &sc->channels[count_c];
 		sband->n_channels = ath5k_copy_channels(ah, sband->channels,
 					AR5K_MODE_11A, max_c);
 
-		hw_rates = ath5k_hw_get_rate_table(ah, AR5K_MODE_11A);
-		sband->n_bitrates = ath5k_copy_rates(sband->bitrates,
-					hw_rates, max_r);
-
 		hw->wiphy->bands[IEEE80211_BAND_5GHZ] = sband;
 	}
+	ath5k_setup_rate_idx(sc, sband);
 
 	ath5k_debug_dump_bands(sc);
 
@@ -978,9 +1038,6 @@ ath5k_getchannels(struct ieee80211_hw *hw)
 static int
 ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
 {
-	struct ath5k_hw *ah = sc->ah;
-	int ret;
-
 	ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "(%u MHz) -> (%u MHz)\n",
 		sc->curchan->center_freq, chan->center_freq);
 
@@ -996,41 +1053,7 @@ ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
 		 * hardware at the new frequency, and then re-enable
 		 * the relevant bits of the h/w.
 		 */
-		ath5k_hw_set_intr(ah, 0);	/* disable interrupts */
-		ath5k_txq_cleanup(sc);		/* clear pending tx frames */
-		ath5k_rx_stop(sc);		/* turn off frame recv */
-		ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true);
-		if (ret) {
-			ATH5K_ERR(sc, "%s: unable to reset channel "
-				"(%u Mhz)\n", __func__, chan->center_freq);
-			return ret;
-		}
-
-		ath5k_hw_set_txpower_limit(sc->ah, 0);
-
-		/*
-		 * Re-enable rx framework.
-		 */
-		ret = ath5k_rx_start(sc);
-		if (ret) {
-			ATH5K_ERR(sc, "%s: unable to restart recv logic\n",
-					__func__);
-			return ret;
-		}
-
-		/*
-		 * Change channels and update the h/w rate map
-		 * if we're switching; e.g. 11a to 11b/g.
-		 *
-		 * XXX needed?
-		 */
-/*		ath5k_chan_change(sc, chan); */
-
-		ath5k_beacon_config(sc);
-		/*
-		 * Re-enable interrupts.
-		 */
-		ath5k_hw_set_intr(ah, sc->imask);
+		return ath5k_reset(sc, true, true);
 	}
 
 	return 0;
@@ -1068,75 +1091,13 @@ ath5k_mode_setup(struct ath5k_softc *sc)
 	ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt);
 }
 
-/*
- * Match the hw provided rate index (through descriptors)
- * to an index for sc->curband->bitrates, so it can be used
- * by the stack.
- *
- * This one is a little bit tricky but i think i'm right
- * about this...
- *
- * We have 4 rate tables in the following order:
- * XR (4 rates)
- * 802.11a (8 rates)
- * 802.11b (4 rates)
- * 802.11g (12 rates)
- * that make the hw rate table.
- *
- * Lets take a 5211 for example that supports a and b modes only.
- * First comes the 802.11a table and then 802.11b (total 12 rates).
- * When hw returns eg. 11 it points to the last 802.11b rate (11Mbit),
- * if it returns 2 it points to the second 802.11a rate etc.
- *
- * Same goes for 5212 who has xr/a/b/g support (total 28 rates).
- * First comes the XR table, then 802.11a, 802.11b and 802.11g.
- * When hw returns eg. 27 it points to the last 802.11g rate (54Mbits) etc
- */
-static void
-ath5k_set_total_hw_rates(struct ath5k_softc *sc) {
-
-	struct ath5k_hw *ah = sc->ah;
-
-	if (test_bit(AR5K_MODE_11A, ah->ah_modes))
-		sc->a_rates = 8;
-
-	if (test_bit(AR5K_MODE_11B, ah->ah_modes))
-		sc->b_rates = 4;
-
-	if (test_bit(AR5K_MODE_11G, ah->ah_modes))
-		sc->g_rates = 12;
-
-	/* XXX: Need to see what what happens when
-		xr disable bits in eeprom are set */
-	if (ah->ah_version >= AR5K_AR5212)
-		sc->xr_rates = 4;
-
-}
-
 static inline int
-ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix) {
-
-	int mac80211_rix;
-
-	if(sc->curband->band == IEEE80211_BAND_2GHZ) {
-		/* We setup a g ratetable for both b/g modes */
-		mac80211_rix =
-			hw_rix - sc->b_rates - sc->a_rates - sc->xr_rates;
-	} else {
-		mac80211_rix = hw_rix - sc->xr_rates;
-	}
-
-	/* Something went wrong, fallback to basic rate for this band */
-	if ((mac80211_rix >= sc->curband->n_bitrates) ||
-		(mac80211_rix <= 0 ))
-		mac80211_rix = 1;
-
-	return mac80211_rix;
+ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix)
+{
+	WARN_ON(hw_rix < 0 || hw_rix > AR5K_MAX_RATES);
+	return sc->rate_idx[sc->curband->band][hw_rix];
 }
 
-
-
-
 /***************\
 * Buffers setup *
 \***************/
@@ -1199,7 +1160,7 @@ ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 	ds = bf->desc;
 	ds->ds_link = bf->daddr;	/* link to self */
 	ds->ds_data = bf->skbaddr;
-	ath5k_hw_setup_rx_desc(ah, ds,
+	ah->ah_setup_rx_desc(ah, ds,
 		skb_tailroom(skb),	/* buffer size */
 		0);
 
@@ -1218,7 +1179,9 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 	struct sk_buff *skb = bf->skb;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	unsigned int pktlen, flags, keyidx = AR5K_TXKEYIX_INVALID;
-	int ret;
+	struct ieee80211_rate *rate;
+	unsigned int mrr_rate[3], mrr_tries[3];
+	int i, ret;
 
 	flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK;
 
@@ -1233,7 +1196,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 
 	if (info->control.hw_key) {
 		keyidx = info->control.hw_key->hw_key_idx;
-		pktlen += info->control.icv_len;
+		pktlen += info->control.hw_key->icv_len;
 	}
 	ret = ah->ah_setup_tx_desc(ah, ds, pktlen,
 		ieee80211_get_hdrlen_from_skb(skb), AR5K_PKT_TYPE_NORMAL,
@@ -1243,6 +1206,22 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 	if (ret)
 		goto err_unmap;
 
+	memset(mrr_rate, 0, sizeof(mrr_rate));
+	memset(mrr_tries, 0, sizeof(mrr_tries));
+	for (i = 0; i < 3; i++) {
+		rate = ieee80211_get_alt_retry_rate(sc->hw, info, i);
+		if (!rate)
+			break;
+
+		mrr_rate[i] = rate->hw_value;
+		mrr_tries[i] = info->control.retries[i].limit;
+	}
+
+	ah->ah_setup_mrr_tx_desc(ah, ds,
+		mrr_rate[0], mrr_tries[0],
+		mrr_rate[1], mrr_tries[1],
+		mrr_rate[2], mrr_tries[2]);
+
 	ds->ds_link = 0;
 	ds->ds_data = bf->skbaddr;
 
@@ -1250,12 +1229,12 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 	list_add_tail(&bf->list, &txq->q);
 	sc->tx_stats[txq->qnum].len++;
 	if (txq->link == NULL) /* is this first packet? */
-		ath5k_hw_put_tx_buf(ah, txq->qnum, bf->daddr);
+		ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr);
 	else /* no, so only link it */
 		*txq->link = bf->daddr;
 
 	txq->link = &ds->ds_link;
-	ath5k_hw_tx_start(ah, txq->qnum);
+	ath5k_hw_start_tx_dma(ah, txq->qnum);
 	mmiowb();
 	spin_unlock_bh(&txq->lock);
 
@@ -1433,7 +1412,8 @@ ath5k_beaconq_config(struct ath5k_softc *sc)
 	ret = ath5k_hw_get_tx_queueprops(ah, sc->bhalq, &qi);
 	if (ret)
 		return ret;
-	if (sc->opmode == IEEE80211_IF_TYPE_AP) {
+	if (sc->opmode == NL80211_IFTYPE_AP ||
+		sc->opmode == NL80211_IFTYPE_MESH_POINT) {
 		/*
 		 * Always burst out beacon and CAB traffic
 		 * (aifs = cwmin = cwmax = 0)
@@ -1441,7 +1421,7 @@ ath5k_beaconq_config(struct ath5k_softc *sc)
 		qi.tqi_aifs = 0;
 		qi.tqi_cw_min = 0;
 		qi.tqi_cw_max = 0;
-	} else if (sc->opmode == IEEE80211_IF_TYPE_IBSS) {
+	} else if (sc->opmode == NL80211_IFTYPE_ADHOC) {
 		/*
 		 * Adhoc mode; backoff between 0 and (2 * cw_min).
 		 */
@@ -1454,7 +1434,7 @@ ath5k_beaconq_config(struct ath5k_softc *sc)
 		"beacon queueprops tqi_aifs:%d tqi_cw_min:%d tqi_cw_max:%d\n",
 		qi.tqi_aifs, qi.tqi_cw_min, qi.tqi_cw_max);
 
-	ret = ath5k_hw_setup_tx_queueprops(ah, sc->bhalq, &qi);
+	ret = ath5k_hw_set_tx_queueprops(ah, sc->bhalq, &qi);
 	if (ret) {
 		ATH5K_ERR(sc, "%s: unable to update parameters for beacon "
 			"hardware queue!\n", __func__);
@@ -1503,14 +1483,14 @@ ath5k_txq_cleanup(struct ath5k_softc *sc)
 		/* don't touch the hardware if marked invalid */
 		ath5k_hw_stop_tx_dma(ah, sc->bhalq);
 		ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "beacon queue %x\n",
-			ath5k_hw_get_tx_buf(ah, sc->bhalq));
+			ath5k_hw_get_txdp(ah, sc->bhalq));
 		for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
 			if (sc->txqs[i].setup) {
 				ath5k_hw_stop_tx_dma(ah, sc->txqs[i].qnum);
 				ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "txq [%u] %x, "
 					"link %p\n",
 					sc->txqs[i].qnum,
-					ath5k_hw_get_tx_buf(ah,
+					ath5k_hw_get_txdp(ah,
 							sc->txqs[i].qnum),
 					sc->txqs[i].link);
 			}
@@ -1570,8 +1550,8 @@ ath5k_rx_start(struct ath5k_softc *sc)
 	bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
 	spin_unlock_bh(&sc->rxbuflock);
 
-	ath5k_hw_put_rx_buf(ah, bf->daddr);
-	ath5k_hw_start_rx(ah);		/* enable recv descriptors */
+	ath5k_hw_set_rxdp(ah, bf->daddr);
+	ath5k_hw_start_rx_dma(ah);	/* enable recv descriptors */
 	ath5k_mode_setup(sc);		/* set filters, etc. */
 	ath5k_hw_start_rx_pcu(ah);	/* re-enable PCU/DMA engine */
 
@@ -1588,7 +1568,7 @@ ath5k_rx_stop(struct ath5k_softc *sc)
 {
 	struct ath5k_hw *ah = sc->ah;
 
-	ath5k_hw_stop_pcu_recv(ah);	/* disable PCU */
+	ath5k_hw_stop_rx_pcu(ah);	/* disable PCU */
 	ath5k_hw_set_rx_filter(ah, 0);	/* clear recv filter */
 	ath5k_hw_stop_rx_dma(ah);	/* disable DMA engine */
 
@@ -1602,7 +1582,7 @@ ath5k_rx_decrypted(struct ath5k_softc *sc, struct ath5k_desc *ds,
 		struct sk_buff *skb, struct ath5k_rx_status *rs)
 {
 	struct ieee80211_hdr *hdr = (void *)skb->data;
-	unsigned int keyix, hlen = ieee80211_get_hdrlen_from_skb(skb);
+	unsigned int keyix, hlen;
 
 	if (!(rs->rs_status & AR5K_RXERR_DECRYPT) &&
 			rs->rs_keyix != AR5K_RXKEYIX_INVALID)
@@ -1611,6 +1591,7 @@ ath5k_rx_decrypted(struct ath5k_softc *sc, struct ath5k_desc *ds,
 	/* Apparently when a default key is used to decrypt the packet
 	   the hw does not set the index used to decrypt.  In such cases
 	   get the index from the packet. */
+	hlen = ieee80211_hdrlen(hdr->frame_control);
 	if (ieee80211_has_protected(hdr->frame_control) &&
 	    !(rs->rs_status & AR5K_RXERR_DECRYPT) &&
 	    skb->len >= hlen + 4) {
@@ -1768,7 +1749,7 @@ ath5k_tasklet_rx(unsigned long data)
 			/* let crypto-error packets fall through in MNTR */
 			if ((rs.rs_status &
 				~(AR5K_RXERR_DECRYPT|AR5K_RXERR_MIC)) ||
-					sc->opmode != IEEE80211_IF_TYPE_MNTR)
+					sc->opmode != NL80211_IFTYPE_MONITOR)
 				goto next;
 		}
 accept:
@@ -1824,10 +1805,14 @@ accept:
 		rxs.rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate);
 		rxs.flag |= ath5k_rx_decrypted(sc, ds, skb, &rs);
 
+		if (rxs.rate_idx >= 0 && rs.rs_rate ==
+		    sc->curband->bitrates[rxs.rate_idx].hw_value_short)
+			rxs.flag |= RX_FLAG_SHORTPRE;
+
 		ath5k_debug_dump_skb(sc, skb, "RX  ", 0);
 
 		/* check beacons in IBSS mode */
-		if (sc->opmode == IEEE80211_IF_TYPE_IBSS)
+		if (sc->opmode == NL80211_IFTYPE_ADHOC)
 			ath5k_check_ibss_tsf(sc, skb, &rxs);
 
 		__ieee80211_rx(sc->hw, skb, &rxs);
@@ -1853,7 +1838,7 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
 	struct ath5k_desc *ds;
 	struct sk_buff *skb;
 	struct ieee80211_tx_info *info;
-	int ret;
+	int i, ret;
 
 	spin_lock(&txq->lock);
 	list_for_each_entry_safe(bf, bf0, &txq->q, list) {
@@ -1875,7 +1860,25 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
 		pci_unmap_single(sc->pdev, bf->skbaddr, skb->len,
 				PCI_DMA_TODEVICE);
 
-		info->status.retry_count = ts.ts_shortretry + ts.ts_longretry / 6;
+		memset(&info->status, 0, sizeof(info->status));
+		info->tx_rate_idx = ath5k_hw_to_driver_rix(sc,
+				ts.ts_rate[ts.ts_final_idx]);
+		info->status.retry_count = ts.ts_longretry;
+
+		for (i = 0; i < 4; i++) {
+			struct ieee80211_tx_altrate *r =
+				&info->status.retries[i];
+
+			if (ts.ts_rate[i]) {
+				r->rate_idx = ath5k_hw_to_driver_rix(sc, ts.ts_rate[i]);
+				r->limit = ts.ts_retry[i];
+			} else {
+				r->rate_idx = -1;
+				r->limit = 0;
+			}
+		}
+
+		info->status.excessive_retries = 0;
 		if (unlikely(ts.ts_status)) {
 			sc->ll_stats.dot11ACKFailureCount++;
 			if (ts.ts_status & AR5K_TXERR_XRETRY)
@@ -1942,7 +1945,7 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 	ds = bf->desc;
 
 	flags = AR5K_TXDESC_NOACK;
-	if (sc->opmode == IEEE80211_IF_TYPE_IBSS && ath5k_hw_hasveol(ah)) {
+	if (sc->opmode == NL80211_IFTYPE_ADHOC && ath5k_hw_hasveol(ah)) {
 		ds->ds_link = bf->daddr;	/* self-linked */
 		flags |= AR5K_TXDESC_VEOL;
 		/*
@@ -1991,8 +1994,8 @@ ath5k_beacon_send(struct ath5k_softc *sc)
 
 	ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "in beacon_send\n");
 
-	if (unlikely(bf->skb == NULL || sc->opmode == IEEE80211_IF_TYPE_STA ||
-			sc->opmode == IEEE80211_IF_TYPE_MNTR)) {
+	if (unlikely(bf->skb == NULL || sc->opmode == NL80211_IFTYPE_STATION ||
+			sc->opmode == NL80211_IFTYPE_MONITOR)) {
 		ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL);
 		return;
 	}
@@ -2032,8 +2035,8 @@ ath5k_beacon_send(struct ath5k_softc *sc)
 		/* NB: hw still stops DMA, so proceed */
 	}
 
-	ath5k_hw_put_tx_buf(ah, sc->bhalq, bf->daddr);
-	ath5k_hw_tx_start(ah, sc->bhalq);
+	ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr);
+	ath5k_hw_start_tx_dma(ah, sc->bhalq);
 	ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n",
 		sc->bhalq, (unsigned long long)bf->daddr, bf->desc);
 
@@ -2162,13 +2165,13 @@ ath5k_beacon_config(struct ath5k_softc *sc)
 {
 	struct ath5k_hw *ah = sc->ah;
 
-	ath5k_hw_set_intr(ah, 0);
+	ath5k_hw_set_imr(ah, 0);
 	sc->bmisscount = 0;
 	sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA);
 
-	if (sc->opmode == IEEE80211_IF_TYPE_STA) {
+	if (sc->opmode == NL80211_IFTYPE_STATION) {
 		sc->imask |= AR5K_INT_BMISS;
-	} else if (sc->opmode == IEEE80211_IF_TYPE_IBSS) {
+	} else if (sc->opmode == NL80211_IFTYPE_ADHOC) {
 		/*
 		 * In IBSS mode we use a self-linked tx descriptor and let the
 		 * hardware send the beacons automatically. We have to load it
@@ -2188,7 +2191,7 @@ ath5k_beacon_config(struct ath5k_softc *sc)
 	}
 	/* TODO else AP */
 
-	ath5k_hw_set_intr(ah, sc->imask);
+	ath5k_hw_set_imr(ah, sc->imask);
 }
 
 
@@ -2220,36 +2223,13 @@ ath5k_init(struct ath5k_softc *sc)
 	 */
 	sc->curchan = sc->hw->conf.channel;
 	sc->curband = &sc->sbands[sc->curchan->band];
-	ret = ath5k_hw_reset(sc->ah, sc->opmode, sc->curchan, false);
-	if (ret) {
-		ATH5K_ERR(sc, "unable to reset hardware: %d\n", ret);
-		goto done;
-	}
-	/*
-	 * This is needed only to setup initial state
-	 * but it's best done after a reset.
-	 */
-	ath5k_hw_set_txpower_limit(sc->ah, 0);
-
-	/*
-	 * Setup the hardware after reset: the key cache
-	 * is filled as needed and the receive engine is
-	 * set going.  Frame transmit is handled entirely
-	 * in the frame output path; there's nothing to do
-	 * here except setup the interrupt mask.
-	 */
-	ret = ath5k_rx_start(sc);
-	if (ret)
-		goto done;
-
-	/*
-	 * Enable interrupts.
-	 */
 	sc->imask = AR5K_INT_RX | AR5K_INT_TX | AR5K_INT_RXEOL |
 		AR5K_INT_RXORN | AR5K_INT_FATAL | AR5K_INT_GLOBAL |
 		AR5K_INT_MIB;
+	ret = ath5k_reset(sc, false, false);
+	if (ret)
+		goto done;
 
-	ath5k_hw_set_intr(sc->ah, sc->imask);
 	/* Set ack to be sent at low bit-rates */
 	ath5k_hw_set_ack_bitrate_high(sc->ah, false);
 
@@ -2290,7 +2270,7 @@ ath5k_stop_locked(struct ath5k_softc *sc)
 
 	if (!test_bit(ATH_STAT_INVALID, sc->status)) {
 		ath5k_led_off(sc);
-		ath5k_hw_set_intr(ah, 0);
+		ath5k_hw_set_imr(ah, 0);
 		synchronize_irq(sc->pdev->irq);
 	}
 	ath5k_txq_cleanup(sc);
@@ -2396,7 +2376,7 @@ ath5k_intr(int irq, void *dev_id)
 				* transmission time) in order to detect wether
 				* automatic TSF updates happened.
 				*/
-				if (sc->opmode == IEEE80211_IF_TYPE_IBSS) {
+				if (sc->opmode == NL80211_IFTYPE_ADHOC) {
 					 /* XXX: only if VEOL suppported */
 					u64 tsf = ath5k_hw_get_tsf64(ah);
 					sc->nexttbtt += sc->bintval;
@@ -2451,7 +2431,7 @@ ath5k_tasklet_reset(unsigned long data)
 {
 	struct ath5k_softc *sc = (void *)data;
 
-	ath5k_reset(sc->hw);
+	ath5k_reset_wake(sc);
 }
 
 /*
@@ -2474,7 +2454,7 @@ ath5k_calibrate(unsigned long data)
 		 * to load new gain values.
 		 */
 		ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "calibration, resetting\n");
-		ath5k_reset(sc->hw);
+		ath5k_reset_wake(sc);
 	}
 	if (ath5k_hw_phy_calibrate(ah, sc->curchan))
 		ATH5K_ERR(sc, "calibration of channel %u failed\n",
@@ -2626,7 +2606,7 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 
 	ath5k_debug_dump_skb(sc, skb, "TX  ", 1);
 
-	if (sc->opmode == IEEE80211_IF_TYPE_MNTR)
+	if (sc->opmode == NL80211_IFTYPE_MONITOR)
 		ATH5K_DBG(sc, ATH5K_DEBUG_XMIT, "tx in monitor (scan?)\n");
 
 	/*
@@ -2675,48 +2655,67 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 }
 
 static int
-ath5k_reset(struct ieee80211_hw *hw)
+ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel)
 {
-	struct ath5k_softc *sc = hw->priv;
 	struct ath5k_hw *ah = sc->ah;
 	int ret;
 
 	ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
 
-	ath5k_hw_set_intr(ah, 0);
-	ath5k_txq_cleanup(sc);
-	ath5k_rx_stop(sc);
-
+	if (stop) {
+		ath5k_hw_set_imr(ah, 0);
+		ath5k_txq_cleanup(sc);
+		ath5k_rx_stop(sc);
+	}
 	ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true);
-	if (unlikely(ret)) {
+	if (ret) {
 		ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
 		goto err;
 	}
+
+	/*
+	 * This is needed only to setup initial state
+	 * but it's best done after a reset.
+	 */
 	ath5k_hw_set_txpower_limit(sc->ah, 0);
 
 	ret = ath5k_rx_start(sc);
-	if (unlikely(ret)) {
+	if (ret) {
 		ATH5K_ERR(sc, "can't start recv logic\n");
 		goto err;
 	}
+
 	/*
-	 * We may be doing a reset in response to an ioctl
-	 * that changes the channel so update any state that
-	 * might change as a result.
+	 * Change channels and update the h/w rate map if we're switching;
+	 * e.g. 11a to 11b/g.
+	 *
+	 * We may be doing a reset in response to an ioctl that changes the
+	 * channel so update any state that might change as a result.
 	 *
 	 * XXX needed?
 	 */
 /*	ath5k_chan_change(sc, c); */
-	ath5k_beacon_config(sc);
-	/* intrs are started by ath5k_beacon_config */
 
-	ieee80211_wake_queues(hw);
+	ath5k_beacon_config(sc);
+	/* intrs are enabled by ath5k_beacon_config */
 
 	return 0;
 err:
 	return ret;
 }
 
+static int
+ath5k_reset_wake(struct ath5k_softc *sc)
+{
+	int ret;
+
+	ret = ath5k_reset(sc, true, true);
+	if (!ret)
+		ieee80211_wake_queues(sc->hw);
+
+	return ret;
+}
+
 static int ath5k_start(struct ieee80211_hw *hw)
 {
 	return ath5k_init(hw->priv);
@@ -2742,9 +2741,9 @@ static int ath5k_add_interface(struct ieee80211_hw *hw,
 	sc->vif = conf->vif;
 
 	switch (conf->type) {
-	case IEEE80211_IF_TYPE_STA:
-	case IEEE80211_IF_TYPE_IBSS:
-	case IEEE80211_IF_TYPE_MNTR:
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_ADHOC:
+	case NL80211_IFTYPE_MONITOR:
 		sc->opmode = conf->type;
 		break;
 	default:
@@ -2815,7 +2814,7 @@ ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	}
 
 	if (conf->changed & IEEE80211_IFCC_BEACON &&
-	    vif->type == IEEE80211_IF_TYPE_IBSS) {
+	    vif->type == NL80211_IFTYPE_ADHOC) {
 		struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
 		if (!beacon) {
 			ret = -ENOMEM;
@@ -2827,7 +2826,7 @@ ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 
 	mutex_unlock(&sc->lock);
 
-	return ath5k_reset(hw);
+	return ath5k_reset_wake(sc);
 unlock:
 	mutex_unlock(&sc->lock);
 	return ret;
@@ -2934,16 +2933,17 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw,
 
 	/* XXX move these to mac80211, and add a beacon IFF flag to mac80211 */
 
-	if (sc->opmode == IEEE80211_IF_TYPE_MNTR)
+	if (sc->opmode == NL80211_IFTYPE_MONITOR)
 		rfilt |= AR5K_RX_FILTER_CONTROL | AR5K_RX_FILTER_BEACON |
 			AR5K_RX_FILTER_PROBEREQ | AR5K_RX_FILTER_PROM;
-	if (sc->opmode != IEEE80211_IF_TYPE_STA)
+	if (sc->opmode != NL80211_IFTYPE_STATION)
 		rfilt |= AR5K_RX_FILTER_PROBEREQ;
-	if (sc->opmode != IEEE80211_IF_TYPE_AP &&
+	if (sc->opmode != NL80211_IFTYPE_AP &&
+		sc->opmode != NL80211_IFTYPE_MESH_POINT &&
 		test_bit(ATH_STAT_PROMISC, sc->status))
 		rfilt |= AR5K_RX_FILTER_PROM;
-	if (sc->opmode == IEEE80211_IF_TYPE_STA ||
-		sc->opmode == IEEE80211_IF_TYPE_IBSS) {
+	if (sc->opmode == NL80211_IFTYPE_STATION ||
+		sc->opmode == NL80211_IFTYPE_ADHOC) {
 		rfilt |= AR5K_RX_FILTER_BEACON;
 	}
 
@@ -3048,7 +3048,7 @@ ath5k_reset_tsf(struct ieee80211_hw *hw)
 	 * in IBSS mode we need to update the beacon timers too.
 	 * this will also reset the TSF if we call it with 0
 	 */
-	if (sc->opmode == IEEE80211_IF_TYPE_IBSS)
+	if (sc->opmode == NL80211_IFTYPE_ADHOC)
 		ath5k_beacon_update_timers(sc, 0);
 	else
 		ath5k_hw_reset_tsf(sc->ah);
@@ -3063,7 +3063,7 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
 
 	ath5k_debug_dump_skb(sc, skb, "BC  ", 1);
 
-	if (sc->opmode != IEEE80211_IF_TYPE_IBSS) {
+	if (sc->opmode != NL80211_IFTYPE_ADHOC) {
 		ret = -EIO;
 		goto end;
 	}
diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h
index 7ec2f377d5c..9d0b728928e 100644
--- a/drivers/net/wireless/ath5k/base.h
+++ b/drivers/net/wireless/ath5k/base.h
@@ -111,17 +111,13 @@ struct ath5k_softc {
 	struct ieee80211_hw	*hw;		/* IEEE 802.11 common */
 	struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
 	struct ieee80211_channel channels[ATH_CHAN_MAX];
-	struct ieee80211_rate	rates[AR5K_MAX_RATES * IEEE80211_NUM_BANDS];
-	enum ieee80211_if_types	opmode;
+	struct ieee80211_rate	rates[IEEE80211_NUM_BANDS][AR5K_MAX_RATES];
+	u8			rate_idx[IEEE80211_NUM_BANDS][AR5K_MAX_RATES];
+	enum nl80211_iftype	opmode;
 	struct ath5k_hw		*ah;		/* Atheros HW */
 
 	struct ieee80211_supported_band		*curband;
 
-	u8			a_rates;
-	u8			b_rates;
-	u8			g_rates;
-	u8			xr_rates;
-
 #ifdef CONFIG_ATH5K_DEBUG
 	struct ath5k_dbg_info	debug;		/* debug info */
 #endif /* CONFIG_ATH5K_DEBUG */
diff --git a/drivers/net/wireless/ath5k/caps.c b/drivers/net/wireless/ath5k/caps.c
new file mode 100644
index 00000000000..150f5ed204a
--- /dev/null
+++ b/drivers/net/wireless/ath5k/caps.c
@@ -0,0 +1,193 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/**************\
+* Capabilities *
+\**************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*
+ * Fill the capabilities struct
+ * TODO: Merge this with EEPROM code when we are done with it
+ */
+int ath5k_hw_set_capabilities(struct ath5k_hw *ah)
+{
+	u16 ee_header;
+
+	ATH5K_TRACE(ah->ah_sc);
+	/* Capabilities stored in the EEPROM */
+	ee_header = ah->ah_capabilities.cap_eeprom.ee_header;
+
+	if (ah->ah_version == AR5K_AR5210) {
+		/*
+		 * Set radio capabilities
+		 * (The AR5110 only supports the middle 5GHz band)
+		 */
+		ah->ah_capabilities.cap_range.range_5ghz_min = 5120;
+		ah->ah_capabilities.cap_range.range_5ghz_max = 5430;
+		ah->ah_capabilities.cap_range.range_2ghz_min = 0;
+		ah->ah_capabilities.cap_range.range_2ghz_max = 0;
+
+		/* Set supported modes */
+		__set_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode);
+		__set_bit(AR5K_MODE_11A_TURBO, ah->ah_capabilities.cap_mode);
+	} else {
+		/*
+		 * XXX The tranceiver supports frequencies from 4920 to 6100GHz
+		 * XXX and from 2312 to 2732GHz. There are problems with the
+		 * XXX current ieee80211 implementation because the IEEE
+		 * XXX channel mapping does not support negative channel
+		 * XXX numbers (2312MHz is channel -19). Of course, this
+		 * XXX doesn't matter because these channels are out of range
+		 * XXX but some regulation domains like MKK (Japan) will
+		 * XXX support frequencies somewhere around 4.8GHz.
+		 */
+
+		/*
+		 * Set radio capabilities
+		 */
+
+		if (AR5K_EEPROM_HDR_11A(ee_header)) {
+			/* 4920 */
+			ah->ah_capabilities.cap_range.range_5ghz_min = 5005;
+			ah->ah_capabilities.cap_range.range_5ghz_max = 6100;
+
+			/* Set supported modes */
+			__set_bit(AR5K_MODE_11A,
+					ah->ah_capabilities.cap_mode);
+			__set_bit(AR5K_MODE_11A_TURBO,
+					ah->ah_capabilities.cap_mode);
+			if (ah->ah_version == AR5K_AR5212)
+				__set_bit(AR5K_MODE_11G_TURBO,
+						ah->ah_capabilities.cap_mode);
+		}
+
+		/* Enable  802.11b if a 2GHz capable radio (2111/5112) is
+		 * connected */
+		if (AR5K_EEPROM_HDR_11B(ee_header) ||
+				AR5K_EEPROM_HDR_11G(ee_header)) {
+			/* 2312 */
+			ah->ah_capabilities.cap_range.range_2ghz_min = 2412;
+			ah->ah_capabilities.cap_range.range_2ghz_max = 2732;
+
+			if (AR5K_EEPROM_HDR_11B(ee_header))
+				__set_bit(AR5K_MODE_11B,
+						ah->ah_capabilities.cap_mode);
+
+			if (AR5K_EEPROM_HDR_11G(ee_header))
+				__set_bit(AR5K_MODE_11G,
+						ah->ah_capabilities.cap_mode);
+		}
+	}
+
+	/* GPIO */
+	ah->ah_gpio_npins = AR5K_NUM_GPIO;
+
+	/* Set number of supported TX queues */
+	if (ah->ah_version == AR5K_AR5210)
+		ah->ah_capabilities.cap_queues.q_tx_num =
+			AR5K_NUM_TX_QUEUES_NOQCU;
+	else
+		ah->ah_capabilities.cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES;
+
+	return 0;
+}
+
+/* Main function used by the driver part to check caps */
+int ath5k_hw_get_capability(struct ath5k_hw *ah,
+		enum ath5k_capability_type cap_type,
+		u32 capability, u32 *result)
+{
+	ATH5K_TRACE(ah->ah_sc);
+
+	switch (cap_type) {
+	case AR5K_CAP_NUM_TXQUEUES:
+		if (result) {
+			if (ah->ah_version == AR5K_AR5210)
+				*result = AR5K_NUM_TX_QUEUES_NOQCU;
+			else
+				*result = AR5K_NUM_TX_QUEUES;
+			goto yes;
+		}
+	case AR5K_CAP_VEOL:
+		goto yes;
+	case AR5K_CAP_COMPRESSION:
+		if (ah->ah_version == AR5K_AR5212)
+			goto yes;
+		else
+			goto no;
+	case AR5K_CAP_BURST:
+		goto yes;
+	case AR5K_CAP_TPC:
+		goto yes;
+	case AR5K_CAP_BSSIDMASK:
+		if (ah->ah_version == AR5K_AR5212)
+			goto yes;
+		else
+			goto no;
+	case AR5K_CAP_XR:
+		if (ah->ah_version == AR5K_AR5212)
+			goto yes;
+		else
+			goto no;
+	default:
+		goto no;
+	}
+
+no:
+	return -EINVAL;
+yes:
+	return 0;
+}
+
+/*
+ * TODO: Following functions should be part of a new function
+ * set_capability
+ */
+
+int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid,
+		u16 assoc_id)
+{
+	ATH5K_TRACE(ah->ah_sc);
+
+	if (ah->ah_version == AR5K_AR5210) {
+		AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
+			AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA);
+		return 0;
+	}
+
+	return -EIO;
+}
+
+int ath5k_hw_disable_pspoll(struct ath5k_hw *ah)
+{
+	ATH5K_TRACE(ah->ah_sc);
+
+	if (ah->ah_version == AR5K_AR5210) {
+		AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1,
+			AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA);
+		return 0;
+	}
+
+	return -EIO;
+}
diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c
index 6fa6c8e04ff..8f92d670f61 100644
--- a/drivers/net/wireless/ath5k/debug.c
+++ b/drivers/net/wireless/ath5k/debug.c
@@ -58,8 +58,8 @@
  * THE POSSIBILITY OF SUCH DAMAGES.
  */
 
-#include "debug.h"
 #include "base.h"
+#include "debug.h"
 
 static unsigned int ath5k_debug;
 module_param_named(debug, ath5k_debug, uint, 0);
@@ -525,7 +525,7 @@ ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah)
 		return;
 
 	printk(KERN_DEBUG "rx queue %x, link %p\n",
-		ath5k_hw_get_rx_buf(ah), sc->rxlink);
+		ath5k_hw_get_rxdp(ah), sc->rxlink);
 
 	spin_lock_bh(&sc->rxbuflock);
 	list_for_each_entry(bf, &sc->rxbuf, list) {
diff --git a/drivers/net/wireless/ath5k/desc.c b/drivers/net/wireless/ath5k/desc.c
new file mode 100644
index 00000000000..dd1374052ba
--- /dev/null
+++ b/drivers/net/wireless/ath5k/desc.c
@@ -0,0 +1,692 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/******************************\
+ Hardware Descriptor Functions
+\******************************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*
+ * TX Descriptors
+ */
+
+/*
+ * Initialize the 2-word tx control descriptor on 5210/5211
+ */
+static int
+ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
+	unsigned int pkt_len, unsigned int hdr_len, enum ath5k_pkt_type type,
+	unsigned int tx_power, unsigned int tx_rate0, unsigned int tx_tries0,
+	unsigned int key_index, unsigned int antenna_mode, unsigned int flags,
+	unsigned int rtscts_rate, unsigned int rtscts_duration)
+{
+	u32 frame_type;
+	struct ath5k_hw_2w_tx_ctl *tx_ctl;
+	unsigned int frame_len;
+
+	tx_ctl = &desc->ud.ds_tx5210.tx_ctl;
+
+	/*
+	 * Validate input
+	 * - Zero retries don't make sense.
+	 * - A zero rate will put the HW into a mode where it continously sends
+	 *   noise on the channel, so it is important to avoid this.
+	 */
+	if (unlikely(tx_tries0 == 0)) {
+		ATH5K_ERR(ah->ah_sc, "zero retries\n");
+		WARN_ON(1);
+		return -EINVAL;
+	}
+	if (unlikely(tx_rate0 == 0)) {
+		ATH5K_ERR(ah->ah_sc, "zero rate\n");
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
+	/* Clear descriptor */
+	memset(&desc->ud.ds_tx5210, 0, sizeof(struct ath5k_hw_5210_tx_desc));
+
+	/* Setup control descriptor */
+
+	/* Verify and set frame length */
+
+	/* remove padding we might have added before */
+	frame_len = pkt_len - (hdr_len & 3) + FCS_LEN;
+
+	if (frame_len & ~AR5K_2W_TX_DESC_CTL0_FRAME_LEN)
+		return -EINVAL;
+
+	tx_ctl->tx_control_0 = frame_len & AR5K_2W_TX_DESC_CTL0_FRAME_LEN;
+
+	/* Verify and set buffer length */
+
+	/* NB: beacon's BufLen must be a multiple of 4 bytes */
+	if (type == AR5K_PKT_TYPE_BEACON)
+		pkt_len = roundup(pkt_len, 4);
+
+	if (pkt_len & ~AR5K_2W_TX_DESC_CTL1_BUF_LEN)
+		return -EINVAL;
+
+	tx_ctl->tx_control_1 = pkt_len & AR5K_2W_TX_DESC_CTL1_BUF_LEN;
+
+	/*
+	 * Verify and set header length
+	 * XXX: I only found that on 5210 code, does it work on 5211 ?
+	 */
+	if (ah->ah_version == AR5K_AR5210) {
+		if (hdr_len & ~AR5K_2W_TX_DESC_CTL0_HEADER_LEN)
+			return -EINVAL;
+		tx_ctl->tx_control_0 |=
+			AR5K_REG_SM(hdr_len, AR5K_2W_TX_DESC_CTL0_HEADER_LEN);
+	}
+
+	/*Diferences between 5210-5211*/
+	if (ah->ah_version == AR5K_AR5210) {
+		switch (type) {
+		case AR5K_PKT_TYPE_BEACON:
+		case AR5K_PKT_TYPE_PROBE_RESP:
+			frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY;
+		case AR5K_PKT_TYPE_PIFS:
+			frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS;
+		default:
+			frame_type = type /*<< 2 ?*/;
+		}
+
+		tx_ctl->tx_control_0 |=
+		AR5K_REG_SM(frame_type, AR5K_2W_TX_DESC_CTL0_FRAME_TYPE) |
+		AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE);
+
+	} else {
+		tx_ctl->tx_control_0 |=
+			AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE) |
+			AR5K_REG_SM(antenna_mode,
+				AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT);
+		tx_ctl->tx_control_1 |=
+			AR5K_REG_SM(type, AR5K_2W_TX_DESC_CTL1_FRAME_TYPE);
+	}
+#define _TX_FLAGS(_c, _flag)					\
+	if (flags & AR5K_TXDESC_##_flag) {			\
+		tx_ctl->tx_control_##_c |=			\
+			AR5K_2W_TX_DESC_CTL##_c##_##_flag;	\
+	}
+
+	_TX_FLAGS(0, CLRDMASK);
+	_TX_FLAGS(0, VEOL);
+	_TX_FLAGS(0, INTREQ);
+	_TX_FLAGS(0, RTSENA);
+	_TX_FLAGS(1, NOACK);
+
+#undef _TX_FLAGS
+
+	/*
+	 * WEP crap
+	 */
+	if (key_index != AR5K_TXKEYIX_INVALID) {
+		tx_ctl->tx_control_0 |=
+			AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID;
+		tx_ctl->tx_control_1 |=
+			AR5K_REG_SM(key_index,
+			AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX);
+	}
+
+	/*
+	 * RTS/CTS Duration [5210 ?]
+	 */
+	if ((ah->ah_version == AR5K_AR5210) &&
+			(flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)))
+		tx_ctl->tx_control_1 |= rtscts_duration &
+				AR5K_2W_TX_DESC_CTL1_RTS_DURATION;
+
+	return 0;
+}
+
+/*
+ * Initialize the 4-word tx control descriptor on 5212
+ */
+static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah,
+	struct ath5k_desc *desc, unsigned int pkt_len, unsigned int hdr_len,
+	enum ath5k_pkt_type type, unsigned int tx_power, unsigned int tx_rate0,
+	unsigned int tx_tries0, unsigned int key_index,
+	unsigned int antenna_mode, unsigned int flags,
+	unsigned int rtscts_rate,
+	unsigned int rtscts_duration)
+{
+	struct ath5k_hw_4w_tx_ctl *tx_ctl;
+	unsigned int frame_len;
+
+	ATH5K_TRACE(ah->ah_sc);
+	tx_ctl = &desc->ud.ds_tx5212.tx_ctl;
+
+	/*
+	 * Validate input
+	 * - Zero retries don't make sense.
+	 * - A zero rate will put the HW into a mode where it continously sends
+	 *   noise on the channel, so it is important to avoid this.
+	 */
+	if (unlikely(tx_tries0 == 0)) {
+		ATH5K_ERR(ah->ah_sc, "zero retries\n");
+		WARN_ON(1);
+		return -EINVAL;
+	}
+	if (unlikely(tx_rate0 == 0)) {
+		ATH5K_ERR(ah->ah_sc, "zero rate\n");
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
+	/* Clear descriptor */
+	memset(&desc->ud.ds_tx5212, 0, sizeof(struct ath5k_hw_5212_tx_desc));
+
+	/* Setup control descriptor */
+
+	/* Verify and set frame length */
+
+	/* remove padding we might have added before */
+	frame_len = pkt_len - (hdr_len & 3) + FCS_LEN;
+
+	if (frame_len & ~AR5K_4W_TX_DESC_CTL0_FRAME_LEN)
+		return -EINVAL;
+
+	tx_ctl->tx_control_0 = frame_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN;
+
+	/* Verify and set buffer length */
+
+	/* NB: beacon's BufLen must be a multiple of 4 bytes */
+	if (type == AR5K_PKT_TYPE_BEACON)
+		pkt_len = roundup(pkt_len, 4);
+
+	if (pkt_len & ~AR5K_4W_TX_DESC_CTL1_BUF_LEN)
+		return -EINVAL;
+
+	tx_ctl->tx_control_1 = pkt_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN;
+
+	tx_ctl->tx_control_0 |=
+		AR5K_REG_SM(tx_power, AR5K_4W_TX_DESC_CTL0_XMIT_POWER) |
+		AR5K_REG_SM(antenna_mode, AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT);
+	tx_ctl->tx_control_1 |= AR5K_REG_SM(type,
+					AR5K_4W_TX_DESC_CTL1_FRAME_TYPE);
+	tx_ctl->tx_control_2 = AR5K_REG_SM(tx_tries0 + AR5K_TUNE_HWTXTRIES,
+					AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0);
+	tx_ctl->tx_control_3 = tx_rate0 & AR5K_4W_TX_DESC_CTL3_XMIT_RATE0;
+
+#define _TX_FLAGS(_c, _flag)					\
+	if (flags & AR5K_TXDESC_##_flag) {			\
+		tx_ctl->tx_control_##_c |=			\
+			AR5K_4W_TX_DESC_CTL##_c##_##_flag;	\
+	}
+
+	_TX_FLAGS(0, CLRDMASK);
+	_TX_FLAGS(0, VEOL);
+	_TX_FLAGS(0, INTREQ);
+	_TX_FLAGS(0, RTSENA);
+	_TX_FLAGS(0, CTSENA);
+	_TX_FLAGS(1, NOACK);
+
+#undef _TX_FLAGS
+
+	/*
+	 * WEP crap
+	 */
+	if (key_index != AR5K_TXKEYIX_INVALID) {
+		tx_ctl->tx_control_0 |= AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID;
+		tx_ctl->tx_control_1 |= AR5K_REG_SM(key_index,
+				AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX);
+	}
+
+	/*
+	 * RTS/CTS
+	 */
+	if (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)) {
+		if ((flags & AR5K_TXDESC_RTSENA) &&
+				(flags & AR5K_TXDESC_CTSENA))
+			return -EINVAL;
+		tx_ctl->tx_control_2 |= rtscts_duration &
+				AR5K_4W_TX_DESC_CTL2_RTS_DURATION;
+		tx_ctl->tx_control_3 |= AR5K_REG_SM(rtscts_rate,
+				AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE);
+	}
+
+	return 0;
+}
+
+/*
+ * Initialize a 4-word multi rate retry tx control descriptor on 5212
+ */
+static int
+ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
+	unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2,
+	u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3)
+{
+	struct ath5k_hw_4w_tx_ctl *tx_ctl;
+
+	/*
+	 * Rates can be 0 as long as the retry count is 0 too.
+	 * A zero rate and nonzero retry count will put the HW into a mode where
+	 * it continously sends noise on the channel, so it is important to
+	 * avoid this.
+	 */
+	if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) ||
+		     (tx_rate2 == 0 && tx_tries2 != 0) ||
+		     (tx_rate3 == 0 && tx_tries3 != 0))) {
+		ATH5K_ERR(ah->ah_sc, "zero rate\n");
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
+	if (ah->ah_version == AR5K_AR5212) {
+		tx_ctl = &desc->ud.ds_tx5212.tx_ctl;
+
+#define _XTX_TRIES(_n)							\
+	if (tx_tries##_n) {						\
+		tx_ctl->tx_control_2 |=					\
+		    AR5K_REG_SM(tx_tries##_n,				\
+		    AR5K_4W_TX_DESC_CTL2_XMIT_TRIES##_n);		\
+		tx_ctl->tx_control_3 |=					\
+		    AR5K_REG_SM(tx_rate##_n,				\
+		    AR5K_4W_TX_DESC_CTL3_XMIT_RATE##_n);		\
+	}
+
+		_XTX_TRIES(1);
+		_XTX_TRIES(2);
+		_XTX_TRIES(3);
+
+#undef _XTX_TRIES
+
+		return 1;
+	}
+
+	return 0;
+}
+
+/* no mrr support for cards older than 5212 */
+static int
+ath5k_hw_setup_no_mrr(struct ath5k_hw *ah, struct ath5k_desc *desc,
+	unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2,
+	u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3)
+{
+	return 0;
+}
+
+/*
+ * Proccess the tx status descriptor on 5210/5211
+ */
+static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah,
+		struct ath5k_desc *desc, struct ath5k_tx_status *ts)
+{
+	struct ath5k_hw_2w_tx_ctl *tx_ctl;
+	struct ath5k_hw_tx_status *tx_status;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	tx_ctl = &desc->ud.ds_tx5210.tx_ctl;
+	tx_status = &desc->ud.ds_tx5210.tx_stat;
+
+	/* No frame has been send or error */
+	if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0))
+		return -EINPROGRESS;
+
+	/*
+	 * Get descriptor status
+	 */
+	ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0,
+		AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP);
+	ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0,
+		AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT);
+	ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0,
+		AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT);
+	/*TODO: ts->ts_virtcol + test*/
+	ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1,
+		AR5K_DESC_TX_STATUS1_SEQ_NUM);
+	ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1,
+		AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH);
+	ts->ts_antenna = 1;
+	ts->ts_status = 0;
+	ts->ts_rate[0] = AR5K_REG_MS(tx_ctl->tx_control_0,
+		AR5K_2W_TX_DESC_CTL0_XMIT_RATE);
+	ts->ts_retry[0] = ts->ts_longretry;
+	ts->ts_final_idx = 0;
+
+	if (!(tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) {
+		if (tx_status->tx_status_0 &
+				AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES)
+			ts->ts_status |= AR5K_TXERR_XRETRY;
+
+		if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN)
+			ts->ts_status |= AR5K_TXERR_FIFO;
+
+		if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED)
+			ts->ts_status |= AR5K_TXERR_FILT;
+	}
+
+	return 0;
+}
+
+/*
+ * Proccess a tx status descriptor on 5212
+ */
+static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah,
+		struct ath5k_desc *desc, struct ath5k_tx_status *ts)
+{
+	struct ath5k_hw_4w_tx_ctl *tx_ctl;
+	struct ath5k_hw_tx_status *tx_status;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	tx_ctl = &desc->ud.ds_tx5212.tx_ctl;
+	tx_status = &desc->ud.ds_tx5212.tx_stat;
+
+	/* No frame has been send or error */
+	if (unlikely(!(tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE)))
+		return -EINPROGRESS;
+
+	/*
+	 * Get descriptor status
+	 */
+	ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0,
+		AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP);
+	ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0,
+		AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT);
+	ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0,
+		AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT);
+	ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1,
+		AR5K_DESC_TX_STATUS1_SEQ_NUM);
+	ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1,
+		AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH);
+	ts->ts_antenna = (tx_status->tx_status_1 &
+		AR5K_DESC_TX_STATUS1_XMIT_ANTENNA) ? 2 : 1;
+	ts->ts_status = 0;
+
+	ts->ts_final_idx = AR5K_REG_MS(tx_status->tx_status_1,
+			AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX);
+
+	/* The longretry counter has the number of un-acked retries
+	 * for the final rate. To get the total number of retries
+	 * we have to add the retry counters for the other rates
+	 * as well
+	 */
+	ts->ts_retry[ts->ts_final_idx] = ts->ts_longretry;
+	switch (ts->ts_final_idx) {
+	case 3:
+		ts->ts_rate[3] = AR5K_REG_MS(tx_ctl->tx_control_3,
+			AR5K_4W_TX_DESC_CTL3_XMIT_RATE3);
+
+		ts->ts_retry[2] = AR5K_REG_MS(tx_ctl->tx_control_2,
+			AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2);
+		ts->ts_longretry += ts->ts_retry[2];
+		/* fall through */
+	case 2:
+		ts->ts_rate[2] = AR5K_REG_MS(tx_ctl->tx_control_3,
+			AR5K_4W_TX_DESC_CTL3_XMIT_RATE2);
+
+		ts->ts_retry[1] = AR5K_REG_MS(tx_ctl->tx_control_2,
+			AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1);
+		ts->ts_longretry += ts->ts_retry[1];
+		/* fall through */
+	case 1:
+		ts->ts_rate[1] = AR5K_REG_MS(tx_ctl->tx_control_3,
+			AR5K_4W_TX_DESC_CTL3_XMIT_RATE1);
+
+		ts->ts_retry[0] = AR5K_REG_MS(tx_ctl->tx_control_2,
+			AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1);
+		ts->ts_longretry += ts->ts_retry[0];
+		/* fall through */
+	case 0:
+		ts->ts_rate[0] = tx_ctl->tx_control_3 &
+			AR5K_4W_TX_DESC_CTL3_XMIT_RATE0;
+		break;
+	}
+
+	/* TX error */
+	if (!(tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) {
+		if (tx_status->tx_status_0 &
+				AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES)
+			ts->ts_status |= AR5K_TXERR_XRETRY;
+
+		if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN)
+			ts->ts_status |= AR5K_TXERR_FIFO;
+
+		if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED)
+			ts->ts_status |= AR5K_TXERR_FILT;
+	}
+
+	return 0;
+}
+
+/*
+ * RX Descriptors
+ */
+
+/*
+ * Initialize an rx control descriptor
+ */
+static int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
+			u32 size, unsigned int flags)
+{
+	struct ath5k_hw_rx_ctl *rx_ctl;
+
+	ATH5K_TRACE(ah->ah_sc);
+	rx_ctl = &desc->ud.ds_rx.rx_ctl;
+
+	/*
+	 * Clear the descriptor
+	 * If we don't clean the status descriptor,
+	 * while scanning we get too many results,
+	 * most of them virtual, after some secs
+	 * of scanning system hangs. M.F.
+	*/
+	memset(&desc->ud.ds_rx, 0, sizeof(struct ath5k_hw_all_rx_desc));
+
+	/* Setup descriptor */
+	rx_ctl->rx_control_1 = size & AR5K_DESC_RX_CTL1_BUF_LEN;
+	if (unlikely(rx_ctl->rx_control_1 != size))
+		return -EINVAL;
+
+	if (flags & AR5K_RXDESC_INTREQ)
+		rx_ctl->rx_control_1 |= AR5K_DESC_RX_CTL1_INTREQ;
+
+	return 0;
+}
+
+/*
+ * Proccess the rx status descriptor on 5210/5211
+ */
+static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah,
+		struct ath5k_desc *desc, struct ath5k_rx_status *rs)
+{
+	struct ath5k_hw_rx_status *rx_status;
+
+	rx_status = &desc->ud.ds_rx.u.rx_stat;
+
+	/* No frame received / not ready */
+	if (unlikely(!(rx_status->rx_status_1 &
+	AR5K_5210_RX_DESC_STATUS1_DONE)))
+		return -EINPROGRESS;
+
+	/*
+	 * Frame receive status
+	 */
+	rs->rs_datalen = rx_status->rx_status_0 &
+		AR5K_5210_RX_DESC_STATUS0_DATA_LEN;
+	rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0,
+		AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL);
+	rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0,
+		AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE);
+	rs->rs_antenna = rx_status->rx_status_0 &
+		AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA;
+	rs->rs_more = rx_status->rx_status_0 &
+		AR5K_5210_RX_DESC_STATUS0_MORE;
+	/* TODO: this timestamp is 13 bit, later on we assume 15 bit */
+	rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
+		AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
+	rs->rs_status = 0;
+	rs->rs_phyerr = 0;
+
+	/*
+	 * Key table status
+	 */
+	if (rx_status->rx_status_1 & AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID)
+		rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1,
+			AR5K_5210_RX_DESC_STATUS1_KEY_INDEX);
+	else
+		rs->rs_keyix = AR5K_RXKEYIX_INVALID;
+
+	/*
+	 * Receive/descriptor errors
+	 */
+	if (!(rx_status->rx_status_1 &
+	AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) {
+		if (rx_status->rx_status_1 &
+				AR5K_5210_RX_DESC_STATUS1_CRC_ERROR)
+			rs->rs_status |= AR5K_RXERR_CRC;
+
+		if (rx_status->rx_status_1 &
+				AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN)
+			rs->rs_status |= AR5K_RXERR_FIFO;
+
+		if (rx_status->rx_status_1 &
+				AR5K_5210_RX_DESC_STATUS1_PHY_ERROR) {
+			rs->rs_status |= AR5K_RXERR_PHY;
+			rs->rs_phyerr |= AR5K_REG_MS(rx_status->rx_status_1,
+				AR5K_5210_RX_DESC_STATUS1_PHY_ERROR);
+		}
+
+		if (rx_status->rx_status_1 &
+				AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR)
+			rs->rs_status |= AR5K_RXERR_DECRYPT;
+	}
+
+	return 0;
+}
+
+/*
+ * Proccess the rx status descriptor on 5212
+ */
+static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah,
+		struct ath5k_desc *desc, struct ath5k_rx_status *rs)
+{
+	struct ath5k_hw_rx_status *rx_status;
+	struct ath5k_hw_rx_error *rx_err;
+
+	ATH5K_TRACE(ah->ah_sc);
+	rx_status = &desc->ud.ds_rx.u.rx_stat;
+
+	/* Overlay on error */
+	rx_err = &desc->ud.ds_rx.u.rx_err;
+
+	/* No frame received / not ready */
+	if (unlikely(!(rx_status->rx_status_1 &
+	AR5K_5212_RX_DESC_STATUS1_DONE)))
+		return -EINPROGRESS;
+
+	/*
+	 * Frame receive status
+	 */
+	rs->rs_datalen = rx_status->rx_status_0 &
+		AR5K_5212_RX_DESC_STATUS0_DATA_LEN;
+	rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0,
+		AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL);
+	rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0,
+		AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE);
+	rs->rs_antenna = rx_status->rx_status_0 &
+		AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA;
+	rs->rs_more = rx_status->rx_status_0 &
+		AR5K_5212_RX_DESC_STATUS0_MORE;
+	rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
+		AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
+	rs->rs_status = 0;
+	rs->rs_phyerr = 0;
+
+	/*
+	 * Key table status
+	 */
+	if (rx_status->rx_status_1 & AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID)
+		rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1,
+				AR5K_5212_RX_DESC_STATUS1_KEY_INDEX);
+	else
+		rs->rs_keyix = AR5K_RXKEYIX_INVALID;
+
+	/*
+	 * Receive/descriptor errors
+	 */
+	if (!(rx_status->rx_status_1 &
+	AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) {
+		if (rx_status->rx_status_1 &
+				AR5K_5212_RX_DESC_STATUS1_CRC_ERROR)
+			rs->rs_status |= AR5K_RXERR_CRC;
+
+		if (rx_status->rx_status_1 &
+				AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) {
+			rs->rs_status |= AR5K_RXERR_PHY;
+			rs->rs_phyerr |= AR5K_REG_MS(rx_err->rx_error_1,
+					   AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE);
+		}
+
+		if (rx_status->rx_status_1 &
+				AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR)
+			rs->rs_status |= AR5K_RXERR_DECRYPT;
+
+		if (rx_status->rx_status_1 &
+				AR5K_5212_RX_DESC_STATUS1_MIC_ERROR)
+			rs->rs_status |= AR5K_RXERR_MIC;
+	}
+
+	return 0;
+}
+
+/*
+ * Init function pointers inside ath5k_hw struct
+ */
+int ath5k_hw_init_desc_functions(struct ath5k_hw *ah)
+{
+
+	if (ah->ah_version != AR5K_AR5210 &&
+		ah->ah_version != AR5K_AR5211 &&
+		ah->ah_version != AR5K_AR5212)
+			return -ENOTSUPP;
+
+	/* XXX: What is this magic value and where is it used ? */
+	if (ah->ah_version == AR5K_AR5212)
+		ah->ah_magic = AR5K_EEPROM_MAGIC_5212;
+	else if (ah->ah_version == AR5K_AR5211)
+		ah->ah_magic = AR5K_EEPROM_MAGIC_5211;
+
+	if (ah->ah_version == AR5K_AR5212) {
+		ah->ah_setup_rx_desc = ath5k_hw_setup_rx_desc;
+		ah->ah_setup_tx_desc = ath5k_hw_setup_4word_tx_desc;
+		ah->ah_setup_mrr_tx_desc = ath5k_hw_setup_mrr_tx_desc;
+		ah->ah_proc_tx_desc = ath5k_hw_proc_4word_tx_status;
+	} else {
+		ah->ah_setup_rx_desc = ath5k_hw_setup_rx_desc;
+		ah->ah_setup_tx_desc = ath5k_hw_setup_2word_tx_desc;
+		ah->ah_setup_mrr_tx_desc = ath5k_hw_setup_no_mrr;
+		ah->ah_proc_tx_desc = ath5k_hw_proc_2word_tx_status;
+	}
+
+	if (ah->ah_version == AR5K_AR5212)
+		ah->ah_proc_rx_desc = ath5k_hw_proc_5212_rx_status;
+	else if (ah->ah_version <= AR5K_AR5211)
+		ah->ah_proc_rx_desc = ath5k_hw_proc_5210_rx_status;
+
+	return 0;
+}
+
diff --git a/drivers/net/wireless/ath5k/hw.h b/drivers/net/wireless/ath5k/desc.h
index 64fca8dcb38..56158c804e3 100644
--- a/drivers/net/wireless/ath5k/hw.h
+++ b/drivers/net/wireless/ath5k/desc.h
@@ -1,8 +1,6 @@
 /*
- * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
- * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
- * Copyright (c) 2007 Matthew W. S. Bell  <mentor@madwifi.org>
- * Copyright (c) 2007 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
  *
  * Permission to use, copy, modify, and distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -15,159 +13,9 @@
  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
  */
 
-#include <linux/delay.h>
-
-/*
- * Gain settings
- */
-
-enum ath5k_rfgain {
-	AR5K_RFGAIN_INACTIVE = 0,
-	AR5K_RFGAIN_READ_REQUESTED,
-	AR5K_RFGAIN_NEED_CHANGE,
-};
-
-#define AR5K_GAIN_CRN_FIX_BITS_5111		4
-#define AR5K_GAIN_CRN_FIX_BITS_5112		7
-#define AR5K_GAIN_CRN_MAX_FIX_BITS		AR5K_GAIN_CRN_FIX_BITS_5112
-#define AR5K_GAIN_DYN_ADJUST_HI_MARGIN		15
-#define AR5K_GAIN_DYN_ADJUST_LO_MARGIN		20
-#define AR5K_GAIN_CCK_PROBE_CORR		5
-#define AR5K_GAIN_CCK_OFDM_GAIN_DELTA		15
-#define AR5K_GAIN_STEP_COUNT			10
-#define AR5K_GAIN_PARAM_TX_CLIP			0
-#define AR5K_GAIN_PARAM_PD_90			1
-#define AR5K_GAIN_PARAM_PD_84			2
-#define AR5K_GAIN_PARAM_GAIN_SEL		3
-#define AR5K_GAIN_PARAM_MIX_ORN			0
-#define AR5K_GAIN_PARAM_PD_138			1
-#define AR5K_GAIN_PARAM_PD_137			2
-#define AR5K_GAIN_PARAM_PD_136			3
-#define AR5K_GAIN_PARAM_PD_132			4
-#define AR5K_GAIN_PARAM_PD_131			5
-#define AR5K_GAIN_PARAM_PD_130			6
-#define AR5K_GAIN_CHECK_ADJUST(_g) 		\
-	((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high)
-
-struct ath5k_gain_opt_step {
-	s16				gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS];
-	s32				gos_gain;
-};
-
-struct ath5k_gain {
-	u32			g_step_idx;
-	u32			g_current;
-	u32			g_target;
-	u32			g_low;
-	u32			g_high;
-	u32			g_f_corr;
-	u32			g_active;
-	const struct ath5k_gain_opt_step	*g_step;
-};
-
-
-/*
- * HW SPECIFIC STRUCTS
- */
-
-/* Some EEPROM defines */
-#define AR5K_EEPROM_EEP_SCALE		100
-#define AR5K_EEPROM_EEP_DELTA		10
-#define AR5K_EEPROM_N_MODES		3
-#define AR5K_EEPROM_N_5GHZ_CHAN		10
-#define AR5K_EEPROM_N_2GHZ_CHAN		3
-#define AR5K_EEPROM_MAX_CHAN		10
-#define AR5K_EEPROM_N_PCDAC		11
-#define AR5K_EEPROM_N_TEST_FREQ		8
-#define AR5K_EEPROM_N_EDGES		8
-#define AR5K_EEPROM_N_INTERCEPTS	11
-#define AR5K_EEPROM_FREQ_M(_v)		AR5K_EEPROM_OFF(_v, 0x7f, 0xff)
-#define AR5K_EEPROM_PCDAC_M		0x3f
-#define AR5K_EEPROM_PCDAC_START		1
-#define AR5K_EEPROM_PCDAC_STOP		63
-#define AR5K_EEPROM_PCDAC_STEP		1
-#define AR5K_EEPROM_NON_EDGE_M		0x40
-#define AR5K_EEPROM_CHANNEL_POWER	8
-#define AR5K_EEPROM_N_OBDB		4
-#define AR5K_EEPROM_OBDB_DIS		0xffff
-#define AR5K_EEPROM_CHANNEL_DIS		0xff
-#define AR5K_EEPROM_SCALE_OC_DELTA(_x)	(((_x) * 2) / 10)
-#define AR5K_EEPROM_N_CTLS(_v)		AR5K_EEPROM_OFF(_v, 16, 32)
-#define AR5K_EEPROM_MAX_CTLS		32
-#define AR5K_EEPROM_N_XPD_PER_CHANNEL	4
-#define AR5K_EEPROM_N_XPD0_POINTS	4
-#define AR5K_EEPROM_N_XPD3_POINTS	3
-#define AR5K_EEPROM_N_INTERCEPT_10_2GHZ	35
-#define AR5K_EEPROM_N_INTERCEPT_10_5GHZ	55
-#define AR5K_EEPROM_POWER_M		0x3f
-#define AR5K_EEPROM_POWER_MIN		0
-#define AR5K_EEPROM_POWER_MAX		3150
-#define AR5K_EEPROM_POWER_STEP		50
-#define AR5K_EEPROM_POWER_TABLE_SIZE	64
-#define AR5K_EEPROM_N_POWER_LOC_11B	4
-#define AR5K_EEPROM_N_POWER_LOC_11G	6
-#define AR5K_EEPROM_I_GAIN		10
-#define AR5K_EEPROM_CCK_OFDM_DELTA	15
-#define AR5K_EEPROM_N_IQ_CAL		2
-
-/* Struct to hold EEPROM calibration data */
-struct ath5k_eeprom_info {
-	u16	ee_magic;
-	u16	ee_protect;
-	u16	ee_regdomain;
-	u16	ee_version;
-	u16	ee_header;
-	u16	ee_ant_gain;
-	u16	ee_misc0;
-	u16	ee_misc1;
-	u16	ee_cck_ofdm_gain_delta;
-	u16	ee_cck_ofdm_power_delta;
-	u16	ee_scaled_cck_delta;
-
-	/* Used for tx thermal adjustment (eeprom_init, rfregs) */
-	u16	ee_tx_clip;
-	u16	ee_pwd_84;
-	u16	ee_pwd_90;
-	u16	ee_gain_select;
-
-	/* RF Calibration settings (reset, rfregs) */
-	u16	ee_i_cal[AR5K_EEPROM_N_MODES];
-	u16	ee_q_cal[AR5K_EEPROM_N_MODES];
-	u16	ee_fixed_bias[AR5K_EEPROM_N_MODES];
-	u16	ee_turbo_max_power[AR5K_EEPROM_N_MODES];
-	u16	ee_xr_power[AR5K_EEPROM_N_MODES];
-	u16	ee_switch_settling[AR5K_EEPROM_N_MODES];
-	u16	ee_ant_tx_rx[AR5K_EEPROM_N_MODES];
-	u16	ee_ant_control[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PCDAC];
-	u16	ee_ob[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB];
-	u16	ee_db[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB];
-	u16	ee_tx_end2xlna_enable[AR5K_EEPROM_N_MODES];
-	u16	ee_tx_end2xpa_disable[AR5K_EEPROM_N_MODES];
-	u16	ee_tx_frm2xpa_enable[AR5K_EEPROM_N_MODES];
-	u16	ee_thr_62[AR5K_EEPROM_N_MODES];
-	u16	ee_xlna_gain[AR5K_EEPROM_N_MODES];
-	u16	ee_xpd[AR5K_EEPROM_N_MODES];
-	u16	ee_x_gain[AR5K_EEPROM_N_MODES];
-	u16	ee_i_gain[AR5K_EEPROM_N_MODES];
-	u16	ee_margin_tx_rx[AR5K_EEPROM_N_MODES];
-
-	/* Unused */
-	u16	ee_false_detect[AR5K_EEPROM_N_MODES];
-	u16	ee_cal_pier[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_2GHZ_CHAN];
-	u16	ee_channel[AR5K_EEPROM_N_MODES][AR5K_EEPROM_MAX_CHAN]; /*empty*/
-
-	/* Conformance test limits (Unused) */
-	u16	ee_ctls;
-	u16	ee_ctl[AR5K_EEPROM_MAX_CTLS];
-
-	/* Noise Floor Calibration settings */
-	s16	ee_noise_floor_thr[AR5K_EEPROM_N_MODES];
-	s8	ee_adc_desired_size[AR5K_EEPROM_N_MODES];
-	s8	ee_pga_desired_size[AR5K_EEPROM_N_MODES];
-};
-
 /*
  * Internal RX/TX descriptor structures
  * (rX: reserved fields possibily used by future versions of the ar5k chipset)
@@ -178,14 +26,15 @@ struct ath5k_eeprom_info {
  */
 struct ath5k_hw_rx_ctl {
 	u32	rx_control_0; /* RX control word 0 */
+	u32	rx_control_1; /* RX control word 1 */
+} __packed;
 
+/* RX control word 0 field/sflags */
 #define AR5K_DESC_RX_CTL0			0x00000000
 
-	u32	rx_control_1; /* RX control word 1 */
-
+/* RX control word 1 fields/flags */
 #define AR5K_DESC_RX_CTL1_BUF_LEN		0x00000fff
 #define AR5K_DESC_RX_CTL1_INTREQ		0x00002000
-} __packed;
 
 /*
  * common hardware RX status descriptor
@@ -197,6 +46,7 @@ struct ath5k_hw_rx_status {
 } __packed;
 
 /* 5210/5211 */
+/* RX status word 0 fields/flags */
 #define AR5K_5210_RX_DESC_STATUS0_DATA_LEN		0x00000fff
 #define AR5K_5210_RX_DESC_STATUS0_MORE			0x00001000
 #define AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE		0x00078000
@@ -205,6 +55,8 @@ struct ath5k_hw_rx_status {
 #define AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL_S	19
 #define AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA	0x38000000
 #define AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA_S	27
+
+/* RX status word 1 fields/flags */
 #define AR5K_5210_RX_DESC_STATUS1_DONE			0x00000001
 #define AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK	0x00000002
 #define AR5K_5210_RX_DESC_STATUS1_CRC_ERROR		0x00000004
@@ -220,6 +72,7 @@ struct ath5k_hw_rx_status {
 #define AR5K_5210_RX_DESC_STATUS1_KEY_CACHE_MISS	0x10000000
 
 /* 5212 */
+/* RX status word 0 fields/flags */
 #define AR5K_5212_RX_DESC_STATUS0_DATA_LEN		0x00000fff
 #define AR5K_5212_RX_DESC_STATUS0_MORE			0x00001000
 #define AR5K_5212_RX_DESC_STATUS0_DECOMP_CRC_ERROR	0x00002000
@@ -229,6 +82,8 @@ struct ath5k_hw_rx_status {
 #define AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL_S	20
 #define AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA	0xf0000000
 #define AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA_S	28
+
+/* RX status word 1 fields/flags */
 #define AR5K_5212_RX_DESC_STATUS1_DONE			0x00000001
 #define AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK	0x00000002
 #define AR5K_5212_RX_DESC_STATUS1_CRC_ERROR		0x00000004
@@ -246,16 +101,18 @@ struct ath5k_hw_rx_status {
  * common hardware RX error descriptor
  */
 struct ath5k_hw_rx_error {
-	u32	rx_error_0; /* RX error word 0 */
+	u32	rx_error_0; /* RX status word 0 */
+	u32	rx_error_1; /* RX status word 1 */
+} __packed;
 
+/* RX error word 0 fields/flags */
 #define AR5K_RX_DESC_ERROR0			0x00000000
 
-	u32	rx_error_1; /* RX error word 1 */
-
+/* RX error word 1 fields/flags */
 #define AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE	0x0000ff00
 #define AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE_S	8
-} __packed;
 
+/* PHY Error codes */
 #define AR5K_DESC_RX_PHY_ERROR_NONE		0x00
 #define AR5K_DESC_RX_PHY_ERROR_TIMING		0x20
 #define AR5K_DESC_RX_PHY_ERROR_PARITY		0x40
@@ -270,7 +127,10 @@ struct ath5k_hw_rx_error {
  */
 struct ath5k_hw_2w_tx_ctl {
 	u32	tx_control_0; /* TX control word 0 */
+	u32	tx_control_1; /* TX control word 1 */
+} __packed;
 
+/* TX control word 0 fields/flags */
 #define AR5K_2W_TX_DESC_CTL0_FRAME_LEN		0x00000fff
 #define AR5K_2W_TX_DESC_CTL0_HEADER_LEN		0x0003f000 /*[5210 ?]*/
 #define AR5K_2W_TX_DESC_CTL0_HEADER_LEN_S	12
@@ -284,29 +144,34 @@ struct ath5k_hw_2w_tx_ctl {
 #define AR5K_2W_TX_DESC_CTL0_FRAME_TYPE_S	26
 #define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210	0x02000000
 #define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211	0x1e000000
-#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT	(ah->ah_version == AR5K_AR5210 ? \
-						AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 : \
-						AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211)
+
+#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT			\
+		(ah->ah_version == AR5K_AR5210 ?		\
+		AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 :	\
+		AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211)
+
 #define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_S	25
 #define AR5K_2W_TX_DESC_CTL0_INTREQ		0x20000000
 #define AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID	0x40000000
 
-	u32	tx_control_1; /* TX control word 1 */
-
+/* TX control word 1 fields/flags */
 #define AR5K_2W_TX_DESC_CTL1_BUF_LEN		0x00000fff
 #define AR5K_2W_TX_DESC_CTL1_MORE		0x00001000
 #define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210	0x0007e000
 #define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211	0x000fe000
-#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX	(ah->ah_version == AR5K_AR5210 ? \
-						AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210 : \
-						AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211)
+
+#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX				\
+			(ah->ah_version == AR5K_AR5210 ?		\
+			AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210 :	\
+			AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211)
+
 #define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_S	13
 #define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE		0x00700000 /*[5211]*/
 #define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE_S	20
 #define AR5K_2W_TX_DESC_CTL1_NOACK		0x00800000 /*[5211]*/
 #define AR5K_2W_TX_DESC_CTL1_RTS_DURATION	0xfff80000 /*[5210 ?]*/
-} __packed;
 
+/* Frame types */
 #define AR5K_AR5210_TX_DESC_FRAME_TYPE_NORMAL   0x00
 #define AR5K_AR5210_TX_DESC_FRAME_TYPE_ATIM     0x04
 #define AR5K_AR5210_TX_DESC_FRAME_TYPE_PSPOLL   0x08
@@ -378,7 +243,10 @@ struct ath5k_hw_4w_tx_ctl {
  */
 struct ath5k_hw_tx_status {
 	u32	tx_status_0; /* TX status word 0 */
+	u32	tx_status_1; /* TX status word 1 */
+} __packed;
 
+/* TX status word 0 fields/flags */
 #define AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK	0x00000001
 #define AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES	0x00000002
 #define AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN	0x00000004
@@ -400,8 +268,7 @@ struct ath5k_hw_tx_status {
 #define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP	0xffff0000
 #define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP_S	16
 
-	u32	tx_status_1; /* TX status word 1 */
-
+/* TX status word 1 fields/flags */
 #define AR5K_DESC_TX_STATUS1_DONE		0x00000001
 #define AR5K_DESC_TX_STATUS1_SEQ_NUM		0x00001ffe
 #define AR5K_DESC_TX_STATUS1_SEQ_NUM_S		1
@@ -411,8 +278,6 @@ struct ath5k_hw_tx_status {
 #define AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX_S	21
 #define AR5K_DESC_TX_STATUS1_COMP_SUCCESS	0x00800000
 #define AR5K_DESC_TX_STATUS1_XMIT_ANTENNA	0x01000000
-} __packed;
-
 
 /*
  * 5210/5211 hardware TX descriptor
@@ -441,176 +306,27 @@ struct ath5k_hw_all_rx_desc {
 	} u;
 } __packed;
 
-
 /*
- * AR5K REGISTER ACCESS
+ * Atheros hardware descriptor
+ * This is read and written to by the hardware
  */
+struct ath5k_desc {
+	u32	ds_link;	/* physical address of the next descriptor */
+	u32	ds_data;	/* physical address of data buffer (skb) */
 
-/*Swap RX/TX Descriptor for big endian archs*/
-#if defined(__BIG_ENDIAN)
-#define AR5K_INIT_CFG	(		\
-	AR5K_CFG_SWTD | AR5K_CFG_SWRD	\
-)
-#else
-#define AR5K_INIT_CFG	0x00000000
-#endif
-
-/*#define AR5K_REG_READ(_reg)	ath5k_hw_reg_read(ah, _reg)
-
-#define AR5K_REG_WRITE(_reg, _val)	ath5k_hw_reg_write(ah, _val, _reg)*/
-
-#define AR5K_REG_SM(_val, _flags)					\
-	(((_val) << _flags##_S) & (_flags))
-
-#define AR5K_REG_MS(_val, _flags)					\
-	(((_val) & (_flags)) >> _flags##_S)
-
-/* Some registers can hold multiple values of interest. For this
- * reason when we want to write to these registers we must first
- * retrieve the values which we do not want to clear (lets call this
- * old_data) and then set the register with this and our new_value:
- * ( old_data | new_value) */
-#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val)			\
-	ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \
-	    (((_val) << _flags##_S) & (_flags)), _reg)
-
-#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask)			\
-	ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) &		\
-			(_mask)) | (_flags), _reg)
-
-#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags)				\
-	ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg)
-
-#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags)			\
-	ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg)
-
-#define AR5K_PHY_WRITE(ah, _reg, _val)					\
-	ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2))
-
-#define AR5K_PHY_READ(ah, _reg)					\
-	ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2))
-
-#define AR5K_REG_WAIT(_i) do {						\
-	if (_i % 64)							\
-		udelay(1);						\
-} while (0)
-
-#define AR5K_EEPROM_READ(_o, _v) do {					\
-	if ((ret = ath5k_hw_eeprom_read(ah, (_o), &(_v))) != 0)	\
-		return (ret);						\
-} while (0)
-
-#define AR5K_EEPROM_READ_HDR(_o, _v)					\
-	AR5K_EEPROM_READ(_o, ah->ah_capabilities.cap_eeprom._v);	\
-
-/* Read status of selected queue */
-#define AR5K_REG_READ_Q(ah, _reg, _queue)				\
-	(ath5k_hw_reg_read(ah, _reg) & (1 << _queue))			\
-
-#define AR5K_REG_WRITE_Q(ah, _reg, _queue)				\
-	ath5k_hw_reg_write(ah, (1 << _queue), _reg)
-
-#define AR5K_Q_ENABLE_BITS(_reg, _queue) do {				\
-	_reg |= 1 << _queue;						\
-} while (0)
-
-#define AR5K_Q_DISABLE_BITS(_reg, _queue) do {				\
-	_reg &= ~(1 << _queue);						\
-} while (0)
-
-#define AR5K_LOW_ID(_a)(				\
-(_a)[0] | (_a)[1] << 8 | (_a)[2] << 16 | (_a)[3] << 24	\
-)
-
-#define AR5K_HIGH_ID(_a)	((_a)[4] | (_a)[5] << 8)
-
-/*
- * Initial register values
- */
-
-/*
- * Common initial register values
- */
-#define AR5K_INIT_MODE				CHANNEL_B
-
-#define AR5K_INIT_TX_LATENCY			502
-#define AR5K_INIT_USEC				39
-#define AR5K_INIT_USEC_TURBO			79
-#define AR5K_INIT_USEC_32			31
-#define AR5K_INIT_CARR_SENSE_EN			1
-#define AR5K_INIT_PROG_IFS			920
-#define AR5K_INIT_PROG_IFS_TURBO		960
-#define AR5K_INIT_EIFS				3440
-#define AR5K_INIT_EIFS_TURBO			6880
-#define AR5K_INIT_SLOT_TIME			396
-#define AR5K_INIT_SLOT_TIME_TURBO		480
-#define AR5K_INIT_ACK_CTS_TIMEOUT		1024
-#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO		0x08000800
-#define AR5K_INIT_SIFS				560
-#define AR5K_INIT_SIFS_TURBO			480
-#define AR5K_INIT_SH_RETRY			10
-#define AR5K_INIT_LG_RETRY			AR5K_INIT_SH_RETRY
-#define AR5K_INIT_SSH_RETRY			32
-#define AR5K_INIT_SLG_RETRY			AR5K_INIT_SSH_RETRY
-#define AR5K_INIT_TX_RETRY			10
-#define AR5K_INIT_TOPS				8
-#define AR5K_INIT_RXNOFRM			8
-#define AR5K_INIT_RPGTO				0
-#define AR5K_INIT_TXNOFRM			0
-#define AR5K_INIT_BEACON_PERIOD			65535
-#define AR5K_INIT_TIM_OFFSET			0
-#define AR5K_INIT_BEACON_EN			0
-#define AR5K_INIT_RESET_TSF			0
-
-#define AR5K_INIT_TRANSMIT_LATENCY		(			\
-	(AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) |	\
-	(AR5K_INIT_USEC)						\
-)
-#define AR5K_INIT_TRANSMIT_LATENCY_TURBO	(			\
-	(AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) |	\
-	(AR5K_INIT_USEC_TURBO)						\
-)
-#define AR5K_INIT_PROTO_TIME_CNTRL		(			\
-	(AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) |	\
-	(AR5K_INIT_PROG_IFS)						\
-)
-#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO	(			\
-	(AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \
-	(AR5K_INIT_PROG_IFS_TURBO)					\
-)
-#define AR5K_INIT_BEACON_CONTROL		(			\
-	(AR5K_INIT_RESET_TSF << 24) | (AR5K_INIT_BEACON_EN << 23) |	\
-	(AR5K_INIT_TIM_OFFSET << 16) | (AR5K_INIT_BEACON_PERIOD)	\
-)
-
-/*
- * Non-common initial register values which have to be loaded into the
- * card at boot time and after each reset.
- */
-
-/* Register dumps are done per operation mode */
-#define AR5K_INI_RFGAIN_5GHZ		0
-#define AR5K_INI_RFGAIN_2GHZ		1
-
-#define AR5K_INI_VAL_11A		0
-#define AR5K_INI_VAL_11A_TURBO		1
-#define AR5K_INI_VAL_11B		2
-#define AR5K_INI_VAL_11G		3
-#define AR5K_INI_VAL_11G_TURBO		4
-#define AR5K_INI_VAL_XR			0
-#define AR5K_INI_VAL_MAX		5
-
-#define AR5K_RF5111_INI_RF_MAX_BANKS	AR5K_MAX_RF_BANKS
-#define AR5K_RF5112_INI_RF_MAX_BANKS	AR5K_MAX_RF_BANKS
+	union {
+		struct ath5k_hw_5210_tx_desc	ds_tx5210;
+		struct ath5k_hw_5212_tx_desc	ds_tx5212;
+		struct ath5k_hw_all_rx_desc	ds_rx;
+	} ud;
+} __packed;
 
-static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits)
-{
-	u32 retval = 0, bit, i;
+#define AR5K_RXDESC_INTREQ	0x0020
 
-	for (i = 0; i < bits; i++) {
-		bit = (val >> i) & 1;
-		retval = (retval << 1) | bit;
-	}
+#define AR5K_TXDESC_CLRDMASK	0x0001
+#define AR5K_TXDESC_NOACK	0x0002	/*[5211+]*/
+#define AR5K_TXDESC_RTSENA	0x0004
+#define AR5K_TXDESC_CTSENA	0x0008
+#define AR5K_TXDESC_INTREQ	0x0010
+#define AR5K_TXDESC_VEOL	0x0020	/*[5211+]*/
 
-	return retval;
-}
diff --git a/drivers/net/wireless/ath5k/dma.c b/drivers/net/wireless/ath5k/dma.c
new file mode 100644
index 00000000000..7adceb2c7fa
--- /dev/null
+++ b/drivers/net/wireless/ath5k/dma.c
@@ -0,0 +1,605 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*************************************\
+* DMA and interrupt masking functions *
+\*************************************/
+
+/*
+ * dma.c - DMA and interrupt masking functions
+ *
+ * Here we setup descriptor pointers (rxdp/txdp) start/stop dma engine and
+ * handle queue setup for 5210 chipset (rest are handled on qcu.c).
+ * Also we setup interrupt mask register (IMR) and read the various iterrupt
+ * status registers (ISR).
+ *
+ * TODO: Handle SISR on 5211+ and introduce a function to return the queue
+ * number that resulted the interrupt.
+ */
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*********\
+* Receive *
+\*********/
+
+/**
+ * ath5k_hw_start_rx_dma - Start DMA receive
+ *
+ * @ah:	The &struct ath5k_hw
+ */
+void ath5k_hw_start_rx_dma(struct ath5k_hw *ah)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR);
+	ath5k_hw_reg_read(ah, AR5K_CR);
+}
+
+/**
+ * ath5k_hw_stop_rx_dma - Stop DMA receive
+ *
+ * @ah:	The &struct ath5k_hw
+ */
+int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah)
+{
+	unsigned int i;
+
+	ATH5K_TRACE(ah->ah_sc);
+	ath5k_hw_reg_write(ah, AR5K_CR_RXD, AR5K_CR);
+
+	/*
+	 * It may take some time to disable the DMA receive unit
+	 */
+	for (i = 1000; i > 0 &&
+			(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0;
+			i--)
+		udelay(10);
+
+	return i ? 0 : -EBUSY;
+}
+
+/**
+ * ath5k_hw_get_rxdp - Get RX Descriptor's address
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * XXX: Is RXDP read and clear ?
+ */
+u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah)
+{
+	return ath5k_hw_reg_read(ah, AR5K_RXDP);
+}
+
+/**
+ * ath5k_hw_set_rxdp - Set RX Descriptor's address
+ *
+ * @ah: The &struct ath5k_hw
+ * @phys_addr: RX descriptor address
+ *
+ * XXX: Should we check if rx is enabled before setting rxdp ?
+ */
+void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr)
+{
+	ATH5K_TRACE(ah->ah_sc);
+
+	ath5k_hw_reg_write(ah, phys_addr, AR5K_RXDP);
+}
+
+
+/**********\
+* Transmit *
+\**********/
+
+/**
+ * ath5k_hw_start_tx_dma - Start DMA transmit for a specific queue
+ *
+ * @ah: The &struct ath5k_hw
+ * @queue: The hw queue number
+ *
+ * Start DMA transmit for a specific queue and since 5210 doesn't have
+ * QCU/DCU, set up queue parameters for 5210 here based on queue type (one
+ * queue for normal data and one queue for beacons). For queue setup
+ * on newer chips check out qcu.c. Returns -EINVAL if queue number is out
+ * of range or if queue is already disabled.
+ *
+ * NOTE: Must be called after setting up tx control descriptor for that
+ * queue (see below).
+ */
+int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue)
+{
+	u32 tx_queue;
+
+	ATH5K_TRACE(ah->ah_sc);
+	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+	/* Return if queue is declared inactive */
+	if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
+		return -EIO;
+
+	if (ah->ah_version == AR5K_AR5210) {
+		tx_queue = ath5k_hw_reg_read(ah, AR5K_CR);
+
+		/*
+		 * Set the queue by type on 5210
+		 */
+		switch (ah->ah_txq[queue].tqi_type) {
+		case AR5K_TX_QUEUE_DATA:
+			tx_queue |= AR5K_CR_TXE0 & ~AR5K_CR_TXD0;
+			break;
+		case AR5K_TX_QUEUE_BEACON:
+			tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1;
+			ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE,
+					AR5K_BSR);
+			break;
+		case AR5K_TX_QUEUE_CAB:
+			tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1;
+			ath5k_hw_reg_write(ah, AR5K_BCR_TQ1FV | AR5K_BCR_TQ1V |
+				AR5K_BCR_BDMAE, AR5K_BSR);
+			break;
+		default:
+			return -EINVAL;
+		}
+		/* Start queue */
+		ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
+		ath5k_hw_reg_read(ah, AR5K_CR);
+	} else {
+		/* Return if queue is disabled */
+		if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue))
+			return -EIO;
+
+		/* Start queue */
+		AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXE, queue);
+	}
+
+	return 0;
+}
+
+/**
+ * ath5k_hw_stop_tx_dma - Stop DMA transmit on a specific queue
+ *
+ * @ah: The &struct ath5k_hw
+ * @queue: The hw queue number
+ *
+ * Stop DMA transmit on a specific hw queue and drain queue so we don't
+ * have any pending frames. Returns -EBUSY if we still have pending frames,
+ * -EINVAL if queue number is out of range.
+ *
+ */
+int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
+{
+	unsigned int i = 40;
+	u32 tx_queue, pending;
+
+	ATH5K_TRACE(ah->ah_sc);
+	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+	/* Return if queue is declared inactive */
+	if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
+		return -EIO;
+
+	if (ah->ah_version == AR5K_AR5210) {
+		tx_queue = ath5k_hw_reg_read(ah, AR5K_CR);
+
+		/*
+		 * Set by queue type
+		 */
+		switch (ah->ah_txq[queue].tqi_type) {
+		case AR5K_TX_QUEUE_DATA:
+			tx_queue |= AR5K_CR_TXD0 & ~AR5K_CR_TXE0;
+			break;
+		case AR5K_TX_QUEUE_BEACON:
+		case AR5K_TX_QUEUE_CAB:
+			/* XXX Fix me... */
+			tx_queue |= AR5K_CR_TXD1 & ~AR5K_CR_TXD1;
+			ath5k_hw_reg_write(ah, 0, AR5K_BSR);
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		/* Stop queue */
+		ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
+		ath5k_hw_reg_read(ah, AR5K_CR);
+	} else {
+		/*
+		 * Schedule TX disable and wait until queue is empty
+		 */
+		AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXD, queue);
+
+		/*Check for pending frames*/
+		do {
+			pending = ath5k_hw_reg_read(ah,
+				AR5K_QUEUE_STATUS(queue)) &
+				AR5K_QCU_STS_FRMPENDCNT;
+			udelay(100);
+		} while (--i && pending);
+
+		/* For 2413+ order PCU to drop packets using
+		 * QUIET mechanism */
+		if (ah->ah_mac_version >= (AR5K_SREV_AR2414 >> 4) &&
+		pending){
+			/* Set periodicity and duration */
+			ath5k_hw_reg_write(ah,
+				AR5K_REG_SM(100, AR5K_QUIET_CTL2_QT_PER)|
+				AR5K_REG_SM(10, AR5K_QUIET_CTL2_QT_DUR),
+				AR5K_QUIET_CTL2);
+
+			/* Enable quiet period for current TSF */
+			ath5k_hw_reg_write(ah,
+				AR5K_QUIET_CTL1_QT_EN |
+				AR5K_REG_SM(ath5k_hw_reg_read(ah,
+						AR5K_TSF_L32_5211) >> 10,
+						AR5K_QUIET_CTL1_NEXT_QT_TSF),
+				AR5K_QUIET_CTL1);
+
+			/* Force channel idle high */
+			AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211,
+					AR5K_DIAG_SW_CHANEL_IDLE_HIGH);
+
+			/* Wait a while and disable mechanism */
+			udelay(200);
+			AR5K_REG_DISABLE_BITS(ah, AR5K_QUIET_CTL1,
+						AR5K_QUIET_CTL1_QT_EN);
+
+			/* Re-check for pending frames */
+			i = 40;
+			do {
+				pending = ath5k_hw_reg_read(ah,
+					AR5K_QUEUE_STATUS(queue)) &
+					AR5K_QCU_STS_FRMPENDCNT;
+				udelay(100);
+			} while (--i && pending);
+
+			AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW_5211,
+					AR5K_DIAG_SW_CHANEL_IDLE_HIGH);
+		}
+
+		/* Clear register */
+		ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD);
+		if (pending)
+			return -EBUSY;
+	}
+
+	/* TODO: Check for success on 5210 else return error */
+	return 0;
+}
+
+/**
+ * ath5k_hw_get_txdp - Get TX Descriptor's address for a specific queue
+ *
+ * @ah: The &struct ath5k_hw
+ * @queue: The hw queue number
+ *
+ * Get TX descriptor's address for a specific queue. For 5210 we ignore
+ * the queue number and use tx queue type since we only have 2 queues.
+ * We use TXDP0 for normal data queue and TXDP1 for beacon queue.
+ * For newer chips with QCU/DCU we just read the corresponding TXDP register.
+ *
+ * XXX: Is TXDP read and clear ?
+ */
+u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue)
+{
+	u16 tx_reg;
+
+	ATH5K_TRACE(ah->ah_sc);
+	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+	/*
+	 * Get the transmit queue descriptor pointer from the selected queue
+	 */
+	/*5210 doesn't have QCU*/
+	if (ah->ah_version == AR5K_AR5210) {
+		switch (ah->ah_txq[queue].tqi_type) {
+		case AR5K_TX_QUEUE_DATA:
+			tx_reg = AR5K_NOQCU_TXDP0;
+			break;
+		case AR5K_TX_QUEUE_BEACON:
+		case AR5K_TX_QUEUE_CAB:
+			tx_reg = AR5K_NOQCU_TXDP1;
+			break;
+		default:
+			return 0xffffffff;
+		}
+	} else {
+		tx_reg = AR5K_QUEUE_TXDP(queue);
+	}
+
+	return ath5k_hw_reg_read(ah, tx_reg);
+}
+
+/**
+ * ath5k_hw_set_txdp - Set TX Descriptor's address for a specific queue
+ *
+ * @ah: The &struct ath5k_hw
+ * @queue: The hw queue number
+ *
+ * Set TX descriptor's address for a specific queue. For 5210 we ignore
+ * the queue number and we use tx queue type since we only have 2 queues
+ * so as above we use TXDP0 for normal data queue and TXDP1 for beacon queue.
+ * For newer chips with QCU/DCU we just set the corresponding TXDP register.
+ * Returns -EINVAL if queue type is invalid for 5210 and -EIO if queue is still
+ * active.
+ */
+int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr)
+{
+	u16 tx_reg;
+
+	ATH5K_TRACE(ah->ah_sc);
+	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+	/*
+	 * Set the transmit queue descriptor pointer register by type
+	 * on 5210
+	 */
+	if (ah->ah_version == AR5K_AR5210) {
+		switch (ah->ah_txq[queue].tqi_type) {
+		case AR5K_TX_QUEUE_DATA:
+			tx_reg = AR5K_NOQCU_TXDP0;
+			break;
+		case AR5K_TX_QUEUE_BEACON:
+		case AR5K_TX_QUEUE_CAB:
+			tx_reg = AR5K_NOQCU_TXDP1;
+			break;
+		default:
+			return -EINVAL;
+		}
+	} else {
+		/*
+		 * Set the transmit queue descriptor pointer for
+		 * the selected queue on QCU for 5211+
+		 * (this won't work if the queue is still active)
+		 */
+		if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue))
+			return -EIO;
+
+		tx_reg = AR5K_QUEUE_TXDP(queue);
+	}
+
+	/* Set descriptor pointer */
+	ath5k_hw_reg_write(ah, phys_addr, tx_reg);
+
+	return 0;
+}
+
+/**
+ * ath5k_hw_update_tx_triglevel - Update tx trigger level
+ *
+ * @ah: The &struct ath5k_hw
+ * @increase: Flag to force increase of trigger level
+ *
+ * This function increases/decreases the tx trigger level for the tx fifo
+ * buffer (aka FIFO threshold) that is used to indicate when PCU flushes
+ * the buffer and transmits it's data. Lowering this results sending small
+ * frames more quickly but can lead to tx underruns, raising it a lot can
+ * result other problems (i think bmiss is related). Right now we start with
+ * the lowest possible (64Bytes) and if we get tx underrun we increase it using
+ * the increase flag. Returns -EIO if we have have reached maximum/minimum.
+ *
+ * XXX: Link this with tx DMA size ?
+ * XXX: Use it to save interrupts ?
+ * TODO: Needs testing, i think it's related to bmiss...
+ */
+int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase)
+{
+	u32 trigger_level, imr;
+	int ret = -EIO;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	/*
+	 * Disable interrupts by setting the mask
+	 */
+	imr = ath5k_hw_set_imr(ah, ah->ah_imr & ~AR5K_INT_GLOBAL);
+
+	trigger_level = AR5K_REG_MS(ath5k_hw_reg_read(ah, AR5K_TXCFG),
+			AR5K_TXCFG_TXFULL);
+
+	if (!increase) {
+		if (--trigger_level < AR5K_TUNE_MIN_TX_FIFO_THRES)
+			goto done;
+	} else
+		trigger_level +=
+			((AR5K_TUNE_MAX_TX_FIFO_THRES - trigger_level) / 2);
+
+	/*
+	 * Update trigger level on success
+	 */
+	if (ah->ah_version == AR5K_AR5210)
+		ath5k_hw_reg_write(ah, trigger_level, AR5K_TRIG_LVL);
+	else
+		AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
+				AR5K_TXCFG_TXFULL, trigger_level);
+
+	ret = 0;
+
+done:
+	/*
+	 * Restore interrupt mask
+	 */
+	ath5k_hw_set_imr(ah, imr);
+
+	return ret;
+}
+
+/*******************\
+* Interrupt masking *
+\*******************/
+
+/**
+ * ath5k_hw_is_intr_pending - Check if we have pending interrupts
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Check if we have pending interrupts to process. Returns 1 if we
+ * have pending interrupts and 0 if we haven't.
+ */
+bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	return ath5k_hw_reg_read(ah, AR5K_INTPEND) == 1 ? 1 : 0;
+}
+
+/**
+ * ath5k_hw_get_isr - Get interrupt status
+ *
+ * @ah: The @struct ath5k_hw
+ * @interrupt_mask: Driver's interrupt mask used to filter out
+ * interrupts in sw.
+ *
+ * This function is used inside our interrupt handler to determine the reason
+ * for the interrupt by reading Primary Interrupt Status Register. Returns an
+ * abstract interrupt status mask which is mostly ISR with some uncommon bits
+ * being mapped on some standard non hw-specific positions
+ * (check out &ath5k_int).
+ *
+ * NOTE: We use read-and-clear register, so after this function is called ISR
+ * is zeroed.
+ *
+ * XXX: Why filter interrupts in sw with interrupt_mask ? No benefit at all
+ * plus it can be misleading (one might thing that we save interrupts this way)
+ */
+int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
+{
+	u32 data;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	/*
+	 * Read interrupt status from the Interrupt Status register
+	 * on 5210
+	 */
+	if (ah->ah_version == AR5K_AR5210) {
+		data = ath5k_hw_reg_read(ah, AR5K_ISR);
+		if (unlikely(data == AR5K_INT_NOCARD)) {
+			*interrupt_mask = data;
+			return -ENODEV;
+		}
+	} else {
+		/*
+		 * Read interrupt status from the Read-And-Clear
+		 * shadow register.
+		 * Note: PISR/SISR Not available on 5210
+		 */
+		data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR);
+	}
+
+	/*
+	 * Get abstract interrupt mask (driver-compatible)
+	 */
+	*interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr;
+
+	if (unlikely(data == AR5K_INT_NOCARD))
+		return -ENODEV;
+
+	if (data & (AR5K_ISR_RXOK | AR5K_ISR_RXERR))
+		*interrupt_mask |= AR5K_INT_RX;
+
+	if (data & (AR5K_ISR_TXOK | AR5K_ISR_TXERR
+		| AR5K_ISR_TXDESC | AR5K_ISR_TXEOL))
+		*interrupt_mask |= AR5K_INT_TX;
+
+	if (ah->ah_version != AR5K_AR5210) {
+		/*HIU = Host Interface Unit (PCI etc)*/
+		if (unlikely(data & (AR5K_ISR_HIUERR)))
+			*interrupt_mask |= AR5K_INT_FATAL;
+
+		/*Beacon Not Ready*/
+		if (unlikely(data & (AR5K_ISR_BNR)))
+			*interrupt_mask |= AR5K_INT_BNR;
+	}
+
+	/*
+	 * XXX: BMISS interrupts may occur after association.
+	 * I found this on 5210 code but it needs testing. If this is
+	 * true we should disable them before assoc and re-enable them
+	 * after a successfull assoc + some jiffies.
+	 */
+#if 0
+	interrupt_mask &= ~AR5K_INT_BMISS;
+#endif
+
+	/*
+	 * In case we didn't handle anything,
+	 * print the register value.
+	 */
+	if (unlikely(*interrupt_mask == 0 && net_ratelimit()))
+		ATH5K_PRINTF("0x%08x\n", data);
+
+	return 0;
+}
+
+/**
+ * ath5k_hw_set_imr - Set interrupt mask
+ *
+ * @ah: The &struct ath5k_hw
+ * @new_mask: The new interrupt mask to be set
+ *
+ * Set the interrupt mask in hw to save interrupts. We do that by mapping
+ * ath5k_int bits to hw-specific bits to remove abstraction and writing
+ * Interrupt Mask Register.
+ */
+enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask)
+{
+	enum ath5k_int old_mask, int_mask;
+
+	/*
+	 * Disable card interrupts to prevent any race conditions
+	 * (they will be re-enabled afterwards).
+	 */
+	ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER);
+	ath5k_hw_reg_read(ah, AR5K_IER);
+
+	old_mask = ah->ah_imr;
+
+	/*
+	 * Add additional, chipset-dependent interrupt mask flags
+	 * and write them to the IMR (interrupt mask register).
+	 */
+	int_mask = new_mask & AR5K_INT_COMMON;
+
+	if (new_mask & AR5K_INT_RX)
+		int_mask |= AR5K_IMR_RXOK | AR5K_IMR_RXERR | AR5K_IMR_RXORN |
+			AR5K_IMR_RXDESC;
+
+	if (new_mask & AR5K_INT_TX)
+		int_mask |= AR5K_IMR_TXOK | AR5K_IMR_TXERR | AR5K_IMR_TXDESC |
+			AR5K_IMR_TXURN;
+
+	if (ah->ah_version != AR5K_AR5210) {
+		if (new_mask & AR5K_INT_FATAL) {
+			int_mask |= AR5K_IMR_HIUERR;
+			AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_MCABT |
+					AR5K_SIMR2_SSERR | AR5K_SIMR2_DPERR);
+		}
+	}
+
+	ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR);
+
+	/* Store new interrupt mask */
+	ah->ah_imr = new_mask;
+
+	/* ..re-enable interrupts */
+	ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER);
+	ath5k_hw_reg_read(ah, AR5K_IER);
+
+	return old_mask;
+}
+
diff --git a/drivers/net/wireless/ath5k/eeprom.c b/drivers/net/wireless/ath5k/eeprom.c
new file mode 100644
index 00000000000..a883839b6a9
--- /dev/null
+++ b/drivers/net/wireless/ath5k/eeprom.c
@@ -0,0 +1,466 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*************************************\
+* EEPROM access functions and helpers *
+\*************************************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*
+ * Read from eeprom
+ */
+static int ath5k_hw_eeprom_read(struct ath5k_hw *ah, u32 offset, u16 *data)
+{
+	u32 status, timeout;
+
+	ATH5K_TRACE(ah->ah_sc);
+	/*
+	 * Initialize EEPROM access
+	 */
+	if (ah->ah_version == AR5K_AR5210) {
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE);
+		(void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset));
+	} else {
+		ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE);
+		AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
+				AR5K_EEPROM_CMD_READ);
+	}
+
+	for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) {
+		status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS);
+		if (status & AR5K_EEPROM_STAT_RDDONE) {
+			if (status & AR5K_EEPROM_STAT_RDERR)
+				return -EIO;
+			*data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) &
+					0xffff);
+			return 0;
+		}
+		udelay(15);
+	}
+
+	return -ETIMEDOUT;
+}
+
+/*
+ * Translate binary channel representation in EEPROM to frequency
+ */
+static u16 ath5k_eeprom_bin2freq(struct ath5k_hw *ah, u16 bin,
+				unsigned int mode)
+{
+	u16 val;
+
+	if (bin == AR5K_EEPROM_CHANNEL_DIS)
+		return bin;
+
+	if (mode == AR5K_EEPROM_MODE_11A) {
+		if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2)
+			val = (5 * bin) + 4800;
+		else
+			val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 :
+				(bin * 10) + 5100;
+	} else {
+		if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2)
+			val = bin + 2300;
+		else
+			val = bin + 2400;
+	}
+
+	return val;
+}
+
+/*
+ * Read antenna infos from eeprom
+ */
+static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset,
+		unsigned int mode)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	u32 o = *offset;
+	u16 val;
+	int ret, i = 0;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_switch_settling[mode]	= (val >> 8) & 0x7f;
+	ee->ee_ant_tx_rx[mode]		= (val >> 2) & 0x3f;
+	ee->ee_ant_control[mode][i]	= (val << 4) & 0x3f;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_ant_control[mode][i++]	|= (val >> 12) & 0xf;
+	ee->ee_ant_control[mode][i++]	= (val >> 6) & 0x3f;
+	ee->ee_ant_control[mode][i++]	= val & 0x3f;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_ant_control[mode][i++]	= (val >> 10) & 0x3f;
+	ee->ee_ant_control[mode][i++]	= (val >> 4) & 0x3f;
+	ee->ee_ant_control[mode][i]	= (val << 2) & 0x3f;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_ant_control[mode][i++]	|= (val >> 14) & 0x3;
+	ee->ee_ant_control[mode][i++]	= (val >> 8) & 0x3f;
+	ee->ee_ant_control[mode][i++]	= (val >> 2) & 0x3f;
+	ee->ee_ant_control[mode][i]	= (val << 4) & 0x3f;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_ant_control[mode][i++]	|= (val >> 12) & 0xf;
+	ee->ee_ant_control[mode][i++]	= (val >> 6) & 0x3f;
+	ee->ee_ant_control[mode][i++]	= val & 0x3f;
+
+	/* Get antenna modes */
+	ah->ah_antenna[mode][0] =
+	    (ee->ee_ant_control[mode][0] << 4) | 0x1;
+	ah->ah_antenna[mode][AR5K_ANT_FIXED_A] =
+	     ee->ee_ant_control[mode][1] 	|
+	    (ee->ee_ant_control[mode][2] << 6) 	|
+	    (ee->ee_ant_control[mode][3] << 12) |
+	    (ee->ee_ant_control[mode][4] << 18) |
+	    (ee->ee_ant_control[mode][5] << 24);
+	ah->ah_antenna[mode][AR5K_ANT_FIXED_B] =
+	     ee->ee_ant_control[mode][6] 	|
+	    (ee->ee_ant_control[mode][7] << 6) 	|
+	    (ee->ee_ant_control[mode][8] << 12) |
+	    (ee->ee_ant_control[mode][9] << 18) |
+	    (ee->ee_ant_control[mode][10] << 24);
+
+	/* return new offset */
+	*offset = o;
+
+	return 0;
+}
+
+/*
+ * Read supported modes from eeprom
+ */
+static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset,
+		unsigned int mode)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	u32 o = *offset;
+	u16 val;
+	int ret;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_tx_end2xlna_enable[mode]	= (val >> 8) & 0xff;
+	ee->ee_thr_62[mode]		= val & 0xff;
+
+	if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2)
+		ee->ee_thr_62[mode] = mode == AR5K_EEPROM_MODE_11A ? 15 : 28;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_tx_end2xpa_disable[mode]	= (val >> 8) & 0xff;
+	ee->ee_tx_frm2xpa_enable[mode]	= val & 0xff;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_pga_desired_size[mode]	= (val >> 8) & 0xff;
+
+	if ((val & 0xff) & 0x80)
+		ee->ee_noise_floor_thr[mode] = -((((val & 0xff) ^ 0xff)) + 1);
+	else
+		ee->ee_noise_floor_thr[mode] = val & 0xff;
+
+	if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2)
+		ee->ee_noise_floor_thr[mode] =
+		    mode == AR5K_EEPROM_MODE_11A ? -54 : -1;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_xlna_gain[mode]		= (val >> 5) & 0xff;
+	ee->ee_x_gain[mode]		= (val >> 1) & 0xf;
+	ee->ee_xpd[mode]		= val & 0x1;
+
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0)
+		ee->ee_fixed_bias[mode] = (val >> 13) & 0x1;
+
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_3) {
+		AR5K_EEPROM_READ(o++, val);
+		ee->ee_false_detect[mode] = (val >> 6) & 0x7f;
+
+		if (mode == AR5K_EEPROM_MODE_11A)
+			ee->ee_xr_power[mode] = val & 0x3f;
+		else {
+			ee->ee_ob[mode][0] = val & 0x7;
+			ee->ee_db[mode][0] = (val >> 3) & 0x7;
+		}
+	}
+
+	if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_4) {
+		ee->ee_i_gain[mode] = AR5K_EEPROM_I_GAIN;
+		ee->ee_cck_ofdm_power_delta = AR5K_EEPROM_CCK_OFDM_DELTA;
+	} else {
+		ee->ee_i_gain[mode] = (val >> 13) & 0x7;
+
+		AR5K_EEPROM_READ(o++, val);
+		ee->ee_i_gain[mode] |= (val << 3) & 0x38;
+
+		if (mode == AR5K_EEPROM_MODE_11G)
+			ee->ee_cck_ofdm_power_delta = (val >> 3) & 0xff;
+	}
+
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 &&
+			mode == AR5K_EEPROM_MODE_11A) {
+		ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
+		ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
+	}
+
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_6 &&
+	    mode == AR5K_EEPROM_MODE_11G)
+		ee->ee_scaled_cck_delta = (val >> 11) & 0x1f;
+
+	/* return new offset */
+	*offset = o;
+
+	return 0;
+}
+
+/*
+ * Initialize eeprom & capabilities structs
+ */
+int ath5k_eeprom_init(struct ath5k_hw *ah)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	unsigned int mode, i;
+	int ret;
+	u32 offset;
+	u16 val;
+
+	/* Initial TX thermal adjustment values */
+	ee->ee_tx_clip = 4;
+	ee->ee_pwd_84 = ee->ee_pwd_90 = 1;
+	ee->ee_gain_select = 1;
+
+	/*
+	 * Read values from EEPROM and store them in the capability structure
+	 */
+	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MAGIC, ee_magic);
+	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_PROTECT, ee_protect);
+	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_REG_DOMAIN, ee_regdomain);
+	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_VERSION, ee_version);
+	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_HDR, ee_header);
+
+	/* Return if we have an old EEPROM */
+	if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0)
+		return 0;
+
+#ifdef notyet
+	/*
+	 * Validate the checksum of the EEPROM date. There are some
+	 * devices with invalid EEPROMs.
+	 */
+	for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) {
+		AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val);
+		cksum ^= val;
+	}
+	if (cksum != AR5K_EEPROM_INFO_CKSUM) {
+		ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum);
+		return -EIO;
+	}
+#endif
+
+	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version),
+	    ee_ant_gain);
+
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
+		AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC0, ee_misc0);
+		AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC1, ee_misc1);
+	}
+
+	if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_3) {
+		AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val);
+		ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7;
+		ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7;
+
+		AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val);
+		ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7;
+		ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7;
+	}
+
+	/*
+	 * Get conformance test limit values
+	 */
+	offset = AR5K_EEPROM_CTL(ah->ah_ee_version);
+	ee->ee_ctls = AR5K_EEPROM_N_CTLS(ah->ah_ee_version);
+
+	for (i = 0; i < ee->ee_ctls; i++) {
+		AR5K_EEPROM_READ(offset++, val);
+		ee->ee_ctl[i] = (val >> 8) & 0xff;
+		ee->ee_ctl[i + 1] = val & 0xff;
+	}
+
+	/*
+	 * Get values for 802.11a (5GHz)
+	 */
+	mode = AR5K_EEPROM_MODE_11A;
+
+	ee->ee_turbo_max_power[mode] =
+			AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header);
+
+	offset = AR5K_EEPROM_MODES_11A(ah->ah_ee_version);
+
+	ret = ath5k_eeprom_read_ants(ah, &offset, mode);
+	if (ret)
+		return ret;
+
+	AR5K_EEPROM_READ(offset++, val);
+	ee->ee_adc_desired_size[mode]	= (s8)((val >> 8) & 0xff);
+	ee->ee_ob[mode][3]		= (val >> 5) & 0x7;
+	ee->ee_db[mode][3]		= (val >> 2) & 0x7;
+	ee->ee_ob[mode][2]		= (val << 1) & 0x7;
+
+	AR5K_EEPROM_READ(offset++, val);
+	ee->ee_ob[mode][2]		|= (val >> 15) & 0x1;
+	ee->ee_db[mode][2]		= (val >> 12) & 0x7;
+	ee->ee_ob[mode][1]		= (val >> 9) & 0x7;
+	ee->ee_db[mode][1]		= (val >> 6) & 0x7;
+	ee->ee_ob[mode][0]		= (val >> 3) & 0x7;
+	ee->ee_db[mode][0]		= val & 0x7;
+
+	ret = ath5k_eeprom_read_modes(ah, &offset, mode);
+	if (ret)
+		return ret;
+
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) {
+		AR5K_EEPROM_READ(offset++, val);
+		ee->ee_margin_tx_rx[mode] = val & 0x3f;
+	}
+
+	/*
+	 * Get values for 802.11b (2.4GHz)
+	 */
+	mode = AR5K_EEPROM_MODE_11B;
+	offset = AR5K_EEPROM_MODES_11B(ah->ah_ee_version);
+
+	ret = ath5k_eeprom_read_ants(ah, &offset, mode);
+	if (ret)
+		return ret;
+
+	AR5K_EEPROM_READ(offset++, val);
+	ee->ee_adc_desired_size[mode]	= (s8)((val >> 8) & 0xff);
+	ee->ee_ob[mode][1]		= (val >> 4) & 0x7;
+	ee->ee_db[mode][1]		= val & 0x7;
+
+	ret = ath5k_eeprom_read_modes(ah, &offset, mode);
+	if (ret)
+		return ret;
+
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
+		AR5K_EEPROM_READ(offset++, val);
+		ee->ee_cal_pier[mode][0] =
+			ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
+		ee->ee_cal_pier[mode][1] =
+			ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode);
+
+		AR5K_EEPROM_READ(offset++, val);
+		ee->ee_cal_pier[mode][2] =
+			ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
+	}
+
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
+		ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
+
+	/*
+	 * Get values for 802.11g (2.4GHz)
+	 */
+	mode = AR5K_EEPROM_MODE_11G;
+	offset = AR5K_EEPROM_MODES_11G(ah->ah_ee_version);
+
+	ret = ath5k_eeprom_read_ants(ah, &offset, mode);
+	if (ret)
+		return ret;
+
+	AR5K_EEPROM_READ(offset++, val);
+	ee->ee_adc_desired_size[mode]	= (s8)((val >> 8) & 0xff);
+	ee->ee_ob[mode][1]		= (val >> 4) & 0x7;
+	ee->ee_db[mode][1]		= val & 0x7;
+
+	ret = ath5k_eeprom_read_modes(ah, &offset, mode);
+	if (ret)
+		return ret;
+
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
+		AR5K_EEPROM_READ(offset++, val);
+		ee->ee_cal_pier[mode][0] =
+			ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
+		ee->ee_cal_pier[mode][1] =
+			ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode);
+
+		AR5K_EEPROM_READ(offset++, val);
+		ee->ee_turbo_max_power[mode] = val & 0x7f;
+		ee->ee_xr_power[mode] = (val >> 7) & 0x3f;
+
+		AR5K_EEPROM_READ(offset++, val);
+		ee->ee_cal_pier[mode][2] =
+			ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
+
+		if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
+			ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
+
+		AR5K_EEPROM_READ(offset++, val);
+		ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
+		ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
+
+		if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) {
+			AR5K_EEPROM_READ(offset++, val);
+			ee->ee_cck_ofdm_gain_delta = val & 0xff;
+		}
+	}
+
+	/*
+	 * Read 5GHz EEPROM channels
+	 */
+
+	return 0;
+}
+
+/*
+ * Read the MAC address from eeprom
+ */
+int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
+{
+	u8 mac_d[ETH_ALEN];
+	u32 total, offset;
+	u16 data;
+	int octet, ret;
+
+	memset(mac, 0, ETH_ALEN);
+	memset(mac_d, 0, ETH_ALEN);
+
+	ret = ath5k_hw_eeprom_read(ah, 0x20, &data);
+	if (ret)
+		return ret;
+
+	for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) {
+		ret = ath5k_hw_eeprom_read(ah, offset, &data);
+		if (ret)
+			return ret;
+
+		total += data;
+		mac_d[octet + 1] = data & 0xff;
+		mac_d[octet] = data >> 8;
+		octet += 2;
+	}
+
+	memcpy(mac, mac_d, ETH_ALEN);
+
+	if (!total || total == 3 * 0xffff)
+		return -EINVAL;
+
+	return 0;
+}
+
diff --git a/drivers/net/wireless/ath5k/eeprom.h b/drivers/net/wireless/ath5k/eeprom.h
new file mode 100644
index 00000000000..a468ecfbb18
--- /dev/null
+++ b/drivers/net/wireless/ath5k/eeprom.h
@@ -0,0 +1,215 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*
+ * Common ar5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE)
+ */
+#define AR5K_EEPROM_MAGIC		0x003d	/* EEPROM Magic number */
+#define AR5K_EEPROM_MAGIC_VALUE		0x5aa5	/* Default - found on EEPROM */
+#define AR5K_EEPROM_MAGIC_5212		0x0000145c /* 5212 */
+#define AR5K_EEPROM_MAGIC_5211		0x0000145b /* 5211 */
+#define AR5K_EEPROM_MAGIC_5210		0x0000145a /* 5210 */
+
+#define AR5K_EEPROM_PROTECT		0x003f	/* EEPROM protect status */
+#define AR5K_EEPROM_PROTECT_RD_0_31	0x0001	/* Read protection bit for offsets 0x0 - 0x1f */
+#define AR5K_EEPROM_PROTECT_WR_0_31	0x0002	/* Write protection bit for offsets 0x0 - 0x1f */
+#define AR5K_EEPROM_PROTECT_RD_32_63	0x0004	/* 0x20 - 0x3f */
+#define AR5K_EEPROM_PROTECT_WR_32_63	0x0008
+#define AR5K_EEPROM_PROTECT_RD_64_127	0x0010	/* 0x40 - 0x7f */
+#define AR5K_EEPROM_PROTECT_WR_64_127	0x0020
+#define AR5K_EEPROM_PROTECT_RD_128_191	0x0040	/* 0x80 - 0xbf (regdom) */
+#define AR5K_EEPROM_PROTECT_WR_128_191	0x0080
+#define AR5K_EEPROM_PROTECT_RD_192_207	0x0100	/* 0xc0 - 0xcf */
+#define AR5K_EEPROM_PROTECT_WR_192_207	0x0200
+#define AR5K_EEPROM_PROTECT_RD_208_223	0x0400	/* 0xd0 - 0xdf */
+#define AR5K_EEPROM_PROTECT_WR_208_223	0x0800
+#define AR5K_EEPROM_PROTECT_RD_224_239	0x1000	/* 0xe0 - 0xef */
+#define AR5K_EEPROM_PROTECT_WR_224_239	0x2000
+#define AR5K_EEPROM_PROTECT_RD_240_255	0x4000	/* 0xf0 - 0xff */
+#define AR5K_EEPROM_PROTECT_WR_240_255	0x8000
+#define AR5K_EEPROM_REG_DOMAIN		0x00bf	/* EEPROM regdom */
+#define AR5K_EEPROM_INFO_BASE		0x00c0	/* EEPROM header */
+#define AR5K_EEPROM_INFO_MAX		(0x400 - AR5K_EEPROM_INFO_BASE)
+#define AR5K_EEPROM_INFO_CKSUM		0xffff
+#define AR5K_EEPROM_INFO(_n)		(AR5K_EEPROM_INFO_BASE + (_n))
+
+#define AR5K_EEPROM_VERSION		AR5K_EEPROM_INFO(1)	/* EEPROM Version */
+#define AR5K_EEPROM_VERSION_3_0		0x3000	/* No idea what's going on before this version */
+#define AR5K_EEPROM_VERSION_3_1		0x3001	/* ob/db values for 2Ghz (ar5211_rfregs) */
+#define AR5K_EEPROM_VERSION_3_2		0x3002	/* different frequency representation (eeprom_bin2freq) */
+#define AR5K_EEPROM_VERSION_3_3		0x3003	/* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */
+#define AR5K_EEPROM_VERSION_3_4		0x3004	/* has ee_i_gain ee_cck_ofdm_power_delta (eeprom_read_modes) */
+#define AR5K_EEPROM_VERSION_4_0		0x4000	/* has ee_misc*, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */
+#define AR5K_EEPROM_VERSION_4_1		0x4001	/* has ee_margin_tx_rx (eeprom_init) */
+#define AR5K_EEPROM_VERSION_4_2		0x4002	/* has ee_cck_ofdm_gain_delta (eeprom_init) */
+#define AR5K_EEPROM_VERSION_4_3		0x4003
+#define AR5K_EEPROM_VERSION_4_4		0x4004
+#define AR5K_EEPROM_VERSION_4_5		0x4005
+#define AR5K_EEPROM_VERSION_4_6		0x4006	/* has ee_scaled_cck_delta */
+#define AR5K_EEPROM_VERSION_4_7		0x4007
+
+#define AR5K_EEPROM_MODE_11A		0
+#define AR5K_EEPROM_MODE_11B		1
+#define AR5K_EEPROM_MODE_11G		2
+
+#define AR5K_EEPROM_HDR			AR5K_EEPROM_INFO(2)	/* Header that contains the device caps */
+#define AR5K_EEPROM_HDR_11A(_v)		(((_v) >> AR5K_EEPROM_MODE_11A) & 0x1)
+#define AR5K_EEPROM_HDR_11B(_v)		(((_v) >> AR5K_EEPROM_MODE_11B) & 0x1)
+#define AR5K_EEPROM_HDR_11G(_v)		(((_v) >> AR5K_EEPROM_MODE_11G) & 0x1)
+#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v)	(((_v) >> 3) & 0x1)	/* Disable turbo for 2Ghz (?) */
+#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v)	(((_v) >> 4) & 0x7f)	/* Max turbo power for a/XR mode (eeprom_init) */
+#define AR5K_EEPROM_HDR_DEVICE(_v)	(((_v) >> 11) & 0x7)
+#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v)	(((_v) >> 15) & 0x1)	/* Disable turbo for 5Ghz (?) */
+#define AR5K_EEPROM_HDR_RFKILL(_v)	(((_v) >> 14) & 0x1)	/* Device has RFKill support */
+
+#define AR5K_EEPROM_RFKILL_GPIO_SEL	0x0000001c
+#define AR5K_EEPROM_RFKILL_GPIO_SEL_S	2
+#define AR5K_EEPROM_RFKILL_POLARITY	0x00000002
+#define AR5K_EEPROM_RFKILL_POLARITY_S	1
+
+/* Newer EEPROMs are using a different offset */
+#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \
+	(((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0)
+
+#define AR5K_EEPROM_ANT_GAIN(_v)	AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3)
+#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v)	((int8_t)(((_v) >> 8) & 0xff))
+#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v)	((int8_t)((_v) & 0xff))
+
+/* calibration settings */
+#define AR5K_EEPROM_MODES_11A(_v)	AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4)
+#define AR5K_EEPROM_MODES_11B(_v)	AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2)
+#define AR5K_EEPROM_MODES_11G(_v)	AR5K_EEPROM_OFF(_v, 0x00da, 0x010d)
+#define AR5K_EEPROM_CTL(_v)		AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128)	/* Conformance test limits */
+
+/* [3.1 - 3.3] */
+#define AR5K_EEPROM_OBDB0_2GHZ		0x00ec
+#define AR5K_EEPROM_OBDB1_2GHZ		0x00ed
+
+/* Misc values available since EEPROM 4.0 */
+#define AR5K_EEPROM_MISC0		0x00c4
+#define AR5K_EEPROM_EARSTART(_v)	((_v) & 0xfff)
+#define AR5K_EEPROM_EEMAP(_v)		(((_v) >> 14) & 0x3)
+#define AR5K_EEPROM_MISC1		0x00c5
+#define AR5K_EEPROM_TARGET_PWRSTART(_v)	((_v) & 0xfff)
+#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v)	(((_v) >> 14) & 0x1)
+
+
+/* Some EEPROM defines */
+#define AR5K_EEPROM_EEP_SCALE		100
+#define AR5K_EEPROM_EEP_DELTA		10
+#define AR5K_EEPROM_N_MODES		3
+#define AR5K_EEPROM_N_5GHZ_CHAN		10
+#define AR5K_EEPROM_N_2GHZ_CHAN		3
+#define AR5K_EEPROM_MAX_CHAN		10
+#define AR5K_EEPROM_N_PCDAC		11
+#define AR5K_EEPROM_N_TEST_FREQ		8
+#define AR5K_EEPROM_N_EDGES		8
+#define AR5K_EEPROM_N_INTERCEPTS	11
+#define AR5K_EEPROM_FREQ_M(_v)		AR5K_EEPROM_OFF(_v, 0x7f, 0xff)
+#define AR5K_EEPROM_PCDAC_M		0x3f
+#define AR5K_EEPROM_PCDAC_START		1
+#define AR5K_EEPROM_PCDAC_STOP		63
+#define AR5K_EEPROM_PCDAC_STEP		1
+#define AR5K_EEPROM_NON_EDGE_M		0x40
+#define AR5K_EEPROM_CHANNEL_POWER	8
+#define AR5K_EEPROM_N_OBDB		4
+#define AR5K_EEPROM_OBDB_DIS		0xffff
+#define AR5K_EEPROM_CHANNEL_DIS		0xff
+#define AR5K_EEPROM_SCALE_OC_DELTA(_x)	(((_x) * 2) / 10)
+#define AR5K_EEPROM_N_CTLS(_v)		AR5K_EEPROM_OFF(_v, 16, 32)
+#define AR5K_EEPROM_MAX_CTLS		32
+#define AR5K_EEPROM_N_XPD_PER_CHANNEL	4
+#define AR5K_EEPROM_N_XPD0_POINTS	4
+#define AR5K_EEPROM_N_XPD3_POINTS	3
+#define AR5K_EEPROM_N_INTERCEPT_10_2GHZ	35
+#define AR5K_EEPROM_N_INTERCEPT_10_5GHZ	55
+#define AR5K_EEPROM_POWER_M		0x3f
+#define AR5K_EEPROM_POWER_MIN		0
+#define AR5K_EEPROM_POWER_MAX		3150
+#define AR5K_EEPROM_POWER_STEP		50
+#define AR5K_EEPROM_POWER_TABLE_SIZE	64
+#define AR5K_EEPROM_N_POWER_LOC_11B	4
+#define AR5K_EEPROM_N_POWER_LOC_11G	6
+#define AR5K_EEPROM_I_GAIN		10
+#define AR5K_EEPROM_CCK_OFDM_DELTA	15
+#define AR5K_EEPROM_N_IQ_CAL		2
+
+#define AR5K_EEPROM_READ(_o, _v) do {			\
+	ret = ath5k_hw_eeprom_read(ah, (_o), &(_v));	\
+	if (ret)					\
+		return ret;				\
+} while (0)
+
+#define AR5K_EEPROM_READ_HDR(_o, _v)					\
+	AR5K_EEPROM_READ(_o, ah->ah_capabilities.cap_eeprom._v);	\
+
+/* Struct to hold EEPROM calibration data */
+struct ath5k_eeprom_info {
+	u16	ee_magic;
+	u16	ee_protect;
+	u16	ee_regdomain;
+	u16	ee_version;
+	u16	ee_header;
+	u16	ee_ant_gain;
+	u16	ee_misc0;
+	u16	ee_misc1;
+	u16	ee_cck_ofdm_gain_delta;
+	u16	ee_cck_ofdm_power_delta;
+	u16	ee_scaled_cck_delta;
+
+	/* Used for tx thermal adjustment (eeprom_init, rfregs) */
+	u16	ee_tx_clip;
+	u16	ee_pwd_84;
+	u16	ee_pwd_90;
+	u16	ee_gain_select;
+
+	/* RF Calibration settings (reset, rfregs) */
+	u16	ee_i_cal[AR5K_EEPROM_N_MODES];
+	u16	ee_q_cal[AR5K_EEPROM_N_MODES];
+	u16	ee_fixed_bias[AR5K_EEPROM_N_MODES];
+	u16	ee_turbo_max_power[AR5K_EEPROM_N_MODES];
+	u16	ee_xr_power[AR5K_EEPROM_N_MODES];
+	u16	ee_switch_settling[AR5K_EEPROM_N_MODES];
+	u16	ee_ant_tx_rx[AR5K_EEPROM_N_MODES];
+	u16	ee_ant_control[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PCDAC];
+	u16	ee_ob[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB];
+	u16	ee_db[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB];
+	u16	ee_tx_end2xlna_enable[AR5K_EEPROM_N_MODES];
+	u16	ee_tx_end2xpa_disable[AR5K_EEPROM_N_MODES];
+	u16	ee_tx_frm2xpa_enable[AR5K_EEPROM_N_MODES];
+	u16	ee_thr_62[AR5K_EEPROM_N_MODES];
+	u16	ee_xlna_gain[AR5K_EEPROM_N_MODES];
+	u16	ee_xpd[AR5K_EEPROM_N_MODES];
+	u16	ee_x_gain[AR5K_EEPROM_N_MODES];
+	u16	ee_i_gain[AR5K_EEPROM_N_MODES];
+	u16	ee_margin_tx_rx[AR5K_EEPROM_N_MODES];
+
+	/* Unused */
+	u16	ee_false_detect[AR5K_EEPROM_N_MODES];
+	u16	ee_cal_pier[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_2GHZ_CHAN];
+	u16	ee_channel[AR5K_EEPROM_N_MODES][AR5K_EEPROM_MAX_CHAN]; /*empty*/
+
+	/* Conformance test limits (Unused) */
+	u16	ee_ctls;
+	u16	ee_ctl[AR5K_EEPROM_MAX_CTLS];
+
+	/* Noise Floor Calibration settings */
+	s16	ee_noise_floor_thr[AR5K_EEPROM_N_MODES];
+	s8	ee_adc_desired_size[AR5K_EEPROM_N_MODES];
+	s8	ee_pga_desired_size[AR5K_EEPROM_N_MODES];
+};
diff --git a/drivers/net/wireless/ath5k/gpio.c b/drivers/net/wireless/ath5k/gpio.c
new file mode 100644
index 00000000000..b77205adc18
--- /dev/null
+++ b/drivers/net/wireless/ath5k/gpio.c
@@ -0,0 +1,176 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/****************\
+  GPIO Functions
+\****************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*
+ * Set led state
+ */
+void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state)
+{
+	u32 led;
+	/*5210 has different led mode handling*/
+	u32 led_5210;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	/*Reset led status*/
+	if (ah->ah_version != AR5K_AR5210)
+		AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG,
+			AR5K_PCICFG_LEDMODE |  AR5K_PCICFG_LED);
+	else
+		AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_LED);
+
+	/*
+	 * Some blinking values, define at your wish
+	 */
+	switch (state) {
+	case AR5K_LED_SCAN:
+	case AR5K_LED_AUTH:
+		led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_PEND;
+		led_5210 = AR5K_PCICFG_LED_PEND | AR5K_PCICFG_LED_BCTL;
+		break;
+
+	case AR5K_LED_INIT:
+		led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_NONE;
+		led_5210 = AR5K_PCICFG_LED_PEND;
+		break;
+
+	case AR5K_LED_ASSOC:
+	case AR5K_LED_RUN:
+		led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_ASSOC;
+		led_5210 = AR5K_PCICFG_LED_ASSOC;
+		break;
+
+	default:
+		led = AR5K_PCICFG_LEDMODE_PROM | AR5K_PCICFG_LED_NONE;
+		led_5210 = AR5K_PCICFG_LED_PEND;
+		break;
+	}
+
+	/*Write new status to the register*/
+	if (ah->ah_version != AR5K_AR5210)
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led);
+	else
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led_5210);
+}
+
+/*
+ * Set GPIO inputs
+ */
+int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	if (gpio > AR5K_NUM_GPIO)
+		return -EINVAL;
+
+	ath5k_hw_reg_write(ah,
+		(ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio))
+		| AR5K_GPIOCR_IN(gpio), AR5K_GPIOCR);
+
+	return 0;
+}
+
+/*
+ * Set GPIO outputs
+ */
+int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	if (gpio > AR5K_NUM_GPIO)
+		return -EINVAL;
+
+	ath5k_hw_reg_write(ah,
+		(ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio))
+		| AR5K_GPIOCR_OUT(gpio), AR5K_GPIOCR);
+
+	return 0;
+}
+
+/*
+ * Get GPIO state
+ */
+u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	if (gpio > AR5K_NUM_GPIO)
+		return 0xffffffff;
+
+	/* GPIO input magic */
+	return ((ath5k_hw_reg_read(ah, AR5K_GPIODI) & AR5K_GPIODI_M) >> gpio) &
+		0x1;
+}
+
+/*
+ * Set GPIO state
+ */
+int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val)
+{
+	u32 data;
+	ATH5K_TRACE(ah->ah_sc);
+
+	if (gpio > AR5K_NUM_GPIO)
+		return -EINVAL;
+
+	/* GPIO output magic */
+	data = ath5k_hw_reg_read(ah, AR5K_GPIODO);
+
+	data &= ~(1 << gpio);
+	data |= (val & 1) << gpio;
+
+	ath5k_hw_reg_write(ah, data, AR5K_GPIODO);
+
+	return 0;
+}
+
+/*
+ * Initialize the GPIO interrupt (RFKill switch)
+ */
+void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio,
+		u32 interrupt_level)
+{
+	u32 data;
+
+	ATH5K_TRACE(ah->ah_sc);
+	if (gpio > AR5K_NUM_GPIO)
+		return;
+
+	/*
+	 * Set the GPIO interrupt
+	 */
+	data = (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &
+		~(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_SELH |
+		AR5K_GPIOCR_INT_ENA | AR5K_GPIOCR_OUT(gpio))) |
+		(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_ENA);
+
+	ath5k_hw_reg_write(ah, interrupt_level ? data :
+		(data | AR5K_GPIOCR_INT_SELH), AR5K_GPIOCR);
+
+	ah->ah_imr |= AR5K_IMR_GPIO;
+
+	/* Enable GPIO interrupts */
+	AR5K_REG_ENABLE_BITS(ah, AR5K_PIMR, AR5K_IMR_GPIO);
+}
+
diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c
deleted file mode 100644
index ad1a5b422c8..00000000000
--- a/drivers/net/wireless/ath5k/hw.c
+++ /dev/null
@@ -1,4529 +0,0 @@
-/*
- * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
- * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
- * Copyright (c) 2007 Matthew W. S. Bell  <mentor@madwifi.org>
- * Copyright (c) 2007 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
- * Copyright (c) 2007 Pavel Roskin <proski@gnu.org>
- * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-/*
- * HW related functions for Atheros Wireless LAN devices.
- */
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-
-#include "reg.h"
-#include "base.h"
-#include "debug.h"
-
-/* Rate tables */
-static const struct ath5k_rate_table ath5k_rt_11a = AR5K_RATES_11A;
-static const struct ath5k_rate_table ath5k_rt_11b = AR5K_RATES_11B;
-static const struct ath5k_rate_table ath5k_rt_11g = AR5K_RATES_11G;
-static const struct ath5k_rate_table ath5k_rt_turbo = AR5K_RATES_TURBO;
-static const struct ath5k_rate_table ath5k_rt_xr = AR5K_RATES_XR;
-
-/* Prototypes */
-static int ath5k_hw_nic_reset(struct ath5k_hw *, u32);
-static int ath5k_hw_nic_wakeup(struct ath5k_hw *, int, bool);
-static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *, struct ath5k_desc *,
-	unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int,
-	unsigned int, unsigned int, unsigned int, unsigned int, unsigned int,
-	unsigned int, unsigned int);
-static int ath5k_hw_setup_xr_tx_desc(struct ath5k_hw *, struct ath5k_desc *,
-	unsigned int, unsigned int, unsigned int, unsigned int, unsigned int,
-	unsigned int);
-static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *, struct ath5k_desc *,
-					 struct ath5k_tx_status *);
-static int ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *, struct ath5k_desc *,
-	unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int,
-	unsigned int, unsigned int, unsigned int, unsigned int, unsigned int,
-	unsigned int, unsigned int);
-static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *, struct ath5k_desc *,
-					 struct ath5k_tx_status *);
-static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *, struct ath5k_desc *,
-					struct ath5k_rx_status *);
-static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *, struct ath5k_desc *,
-					struct ath5k_rx_status *);
-static int ath5k_hw_get_capabilities(struct ath5k_hw *);
-
-static int ath5k_eeprom_init(struct ath5k_hw *);
-static int ath5k_eeprom_read_mac(struct ath5k_hw *, u8 *);
-
-static int ath5k_hw_enable_pspoll(struct ath5k_hw *, u8 *, u16);
-static int ath5k_hw_disable_pspoll(struct ath5k_hw *);
-
-/*
- * Enable to overwrite the country code (use "00" for debug)
- */
-#if 0
-#define COUNTRYCODE "00"
-#endif
-
-/*******************\
-  General Functions
-\*******************/
-
-/*
- * Functions used internaly
- */
-
-static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo)
-{
-	return turbo ? (usec * 80) : (usec * 40);
-}
-
-static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo)
-{
-	return turbo ? (clock / 80) : (clock / 40);
-}
-
-/*
- * Check if a register write has been completed
- */
-int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val,
-		bool is_set)
-{
-	int i;
-	u32 data;
-
-	for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) {
-		data = ath5k_hw_reg_read(ah, reg);
-		if (is_set && (data & flag))
-			break;
-		else if ((data & flag) == val)
-			break;
-		udelay(15);
-	}
-
-	return (i <= 0) ? -EAGAIN : 0;
-}
-
-
-/***************************************\
-	Attach/Detach Functions
-\***************************************/
-
-/*
- * Power On Self Test helper function
- */
-static int ath5k_hw_post(struct ath5k_hw *ah)
-{
-
-	int i, c;
-	u16 cur_reg;
-	u16 regs[2] = {AR5K_STA_ID0, AR5K_PHY(8)};
-	u32 var_pattern;
-	u32 static_pattern[4] = {
-		0x55555555,	0xaaaaaaaa,
-		0x66666666,	0x99999999
-	};
-	u32 init_val;
-	u32 cur_val;
-
-	for (c = 0; c < 2; c++) {
-
-		cur_reg = regs[c];
-
-		/* Save previous value */
-		init_val = ath5k_hw_reg_read(ah, cur_reg);
-
-		for (i = 0; i < 256; i++) {
-			var_pattern = i << 16 | i;
-			ath5k_hw_reg_write(ah, var_pattern, cur_reg);
-			cur_val = ath5k_hw_reg_read(ah, cur_reg);
-
-			if (cur_val != var_pattern) {
-				ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n");
-				return -EAGAIN;
-			}
-
-			/* Found on ndiswrapper dumps */
-			var_pattern = 0x0039080f;
-			ath5k_hw_reg_write(ah, var_pattern, cur_reg);
-		}
-
-		for (i = 0; i < 4; i++) {
-			var_pattern = static_pattern[i];
-			ath5k_hw_reg_write(ah, var_pattern, cur_reg);
-			cur_val = ath5k_hw_reg_read(ah, cur_reg);
-
-			if (cur_val != var_pattern) {
-				ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n");
-				return -EAGAIN;
-			}
-
-			/* Found on ndiswrapper dumps */
-			var_pattern = 0x003b080f;
-			ath5k_hw_reg_write(ah, var_pattern, cur_reg);
-		}
-
-		/* Restore previous value */
-		ath5k_hw_reg_write(ah, init_val, cur_reg);
-
-	}
-
-	return 0;
-
-}
-
-/*
- * Check if the device is supported and initialize the needed structs
- */
-struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
-{
-	struct ath5k_hw *ah;
-	struct pci_dev *pdev = sc->pdev;
-	u8 mac[ETH_ALEN];
-	int ret;
-	u32 srev;
-
-	/*If we passed the test malloc a ath5k_hw struct*/
-	ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL);
-	if (ah == NULL) {
-		ret = -ENOMEM;
-		ATH5K_ERR(sc, "out of memory\n");
-		goto err;
-	}
-
-	ah->ah_sc = sc;
-	ah->ah_iobase = sc->iobase;
-
-	/*
-	 * HW information
-	 */
-
-	ah->ah_op_mode = IEEE80211_IF_TYPE_STA;
-	ah->ah_radar.r_enabled = AR5K_TUNE_RADAR_ALERT;
-	ah->ah_turbo = false;
-	ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER;
-	ah->ah_imr = 0;
-	ah->ah_atim_window = 0;
-	ah->ah_aifs = AR5K_TUNE_AIFS;
-	ah->ah_cw_min = AR5K_TUNE_CWMIN;
-	ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY;
-	ah->ah_software_retry = false;
-	ah->ah_ant_diversity = AR5K_TUNE_ANT_DIVERSITY;
-
-	/*
-	 * Set the mac revision based on the pci id
-	 */
-	ah->ah_version = mac_version;
-
-	/*Fill the ath5k_hw struct with the needed functions*/
-	if (ah->ah_version == AR5K_AR5212)
-		ah->ah_magic = AR5K_EEPROM_MAGIC_5212;
-	else if (ah->ah_version == AR5K_AR5211)
-		ah->ah_magic = AR5K_EEPROM_MAGIC_5211;
-
-	if (ah->ah_version == AR5K_AR5212) {
-		ah->ah_setup_tx_desc = ath5k_hw_setup_4word_tx_desc;
-		ah->ah_setup_xtx_desc = ath5k_hw_setup_xr_tx_desc;
-		ah->ah_proc_tx_desc = ath5k_hw_proc_4word_tx_status;
-	} else {
-		ah->ah_setup_tx_desc = ath5k_hw_setup_2word_tx_desc;
-		ah->ah_setup_xtx_desc = ath5k_hw_setup_xr_tx_desc;
-		ah->ah_proc_tx_desc = ath5k_hw_proc_2word_tx_status;
-	}
-
-	if (ah->ah_version == AR5K_AR5212)
-		ah->ah_proc_rx_desc = ath5k_hw_proc_5212_rx_status;
-	else if (ah->ah_version <= AR5K_AR5211)
-		ah->ah_proc_rx_desc = ath5k_hw_proc_5210_rx_status;
-
-	/* Bring device out of sleep and reset it's units */
-	ret = ath5k_hw_nic_wakeup(ah, AR5K_INIT_MODE, true);
-	if (ret)
-		goto err_free;
-
-	/* Get MAC, PHY and RADIO revisions */
-	srev = ath5k_hw_reg_read(ah, AR5K_SREV);
-	ah->ah_mac_srev = srev;
-	ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER);
-	ah->ah_mac_revision = AR5K_REG_MS(srev, AR5K_SREV_REV);
-	ah->ah_phy_revision = ath5k_hw_reg_read(ah, AR5K_PHY_CHIP_ID) &
-			0xffffffff;
-	ah->ah_radio_5ghz_revision = ath5k_hw_radio_revision(ah,
-			CHANNEL_5GHZ);
-
-	if (ah->ah_version == AR5K_AR5210)
-		ah->ah_radio_2ghz_revision = 0;
-	else
-		ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
-				CHANNEL_2GHZ);
-
-	/* Return on unsuported chips (unsupported eeprom etc) */
-	if ((srev >= AR5K_SREV_VER_AR5416) &&
-	(srev < AR5K_SREV_VER_AR2425)) {
-		ATH5K_ERR(sc, "Device not yet supported.\n");
-		ret = -ENODEV;
-		goto err_free;
-	} else if (srev == AR5K_SREV_VER_AR2425) {
-		ATH5K_WARN(sc, "Support for RF2425 is under development.\n");
-	}
-
-	/* Identify single chip solutions */
-	if (((srev <= AR5K_SREV_VER_AR5414) &&
-	(srev >= AR5K_SREV_VER_AR2413)) ||
-	(srev == AR5K_SREV_VER_AR2425)) {
-		ah->ah_single_chip = true;
-	} else {
-		ah->ah_single_chip = false;
-	}
-
-	/* Single chip radio */
-	if (ah->ah_radio_2ghz_revision == ah->ah_radio_5ghz_revision)
-		ah->ah_radio_2ghz_revision = 0;
-
-	/* Identify the radio chip*/
-	if (ah->ah_version == AR5K_AR5210) {
-		ah->ah_radio = AR5K_RF5110;
-	/*
-	 * Register returns 0x0/0x04 for radio revision
-	 * so ath5k_hw_radio_revision doesn't parse the value
-	 * correctly. For now we are based on mac's srev to
-	 * identify RF2425 radio.
-	 */
-	} else if (srev == AR5K_SREV_VER_AR2425) {
-		ah->ah_radio = AR5K_RF2425;
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425;
-	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112) {
-		ah->ah_radio = AR5K_RF5111;
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5111;
-	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC0) {
-		ah->ah_radio = AR5K_RF5112;
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112;
-	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC1) {
-		ah->ah_radio = AR5K_RF2413;
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413;
-	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC2) {
-		ah->ah_radio = AR5K_RF5413;
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
-	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5133) {
-		/* AR5424 */
-		if (srev >= AR5K_SREV_VER_AR5424) {
-			ah->ah_radio = AR5K_RF5413;
-			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
-		/* AR2424 */
-		} else {
-			ah->ah_radio = AR5K_RF2413; /* For testing */
-			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413;
-		}
-	}
-	ah->ah_phy = AR5K_PHY(0);
-
-	/*
-	 * Write PCI-E power save settings
-	 */
-	if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) {
-		ath5k_hw_reg_write(ah, 0x9248fc00, 0x4080);
-		ath5k_hw_reg_write(ah, 0x24924924, 0x4080);
-		ath5k_hw_reg_write(ah, 0x28000039, 0x4080);
-		ath5k_hw_reg_write(ah, 0x53160824, 0x4080);
-		ath5k_hw_reg_write(ah, 0xe5980579, 0x4080);
-		ath5k_hw_reg_write(ah, 0x001defff, 0x4080);
-		ath5k_hw_reg_write(ah, 0x1aaabe40, 0x4080);
-		ath5k_hw_reg_write(ah, 0xbe105554, 0x4080);
-		ath5k_hw_reg_write(ah, 0x000e3007, 0x4080);
-		ath5k_hw_reg_write(ah, 0x00000000, 0x4084);
-	}
-
-	/*
-	 * POST
-	 */
-	ret = ath5k_hw_post(ah);
-	if (ret)
-		goto err_free;
-
-	/* Write AR5K_PCICFG_UNK on 2112B and later chips */
-	if (ah->ah_radio_5ghz_revision > AR5K_SREV_RAD_2112B ||
-	srev > AR5K_SREV_VER_AR2413) {
-		ath5k_hw_reg_write(ah, AR5K_PCICFG_UNK, AR5K_PCICFG);
-	}
-
-	/*
-	 * Get card capabilities, values, ...
-	 */
-	ret = ath5k_eeprom_init(ah);
-	if (ret) {
-		ATH5K_ERR(sc, "unable to init EEPROM\n");
-		goto err_free;
-	}
-
-	/* Get misc capabilities */
-	ret = ath5k_hw_get_capabilities(ah);
-	if (ret) {
-		ATH5K_ERR(sc, "unable to get device capabilities: 0x%04x\n",
-			sc->pdev->device);
-		goto err_free;
-	}
-
-	/* Get MAC address */
-	ret = ath5k_eeprom_read_mac(ah, mac);
-	if (ret) {
-		ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n",
-			sc->pdev->device);
-		goto err_free;
-	}
-
-	ath5k_hw_set_lladdr(ah, mac);
-	/* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */
-	memset(ah->ah_bssid, 0xff, ETH_ALEN);
-	ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
-	ath5k_hw_set_opmode(ah);
-
-	ath5k_hw_set_rfgain_opt(ah);
-
-	return ah;
-err_free:
-	kfree(ah);
-err:
-	return ERR_PTR(ret);
-}
-
-/*
- * Bring up MAC + PHY Chips
- */
-static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
-{
-	struct pci_dev *pdev = ah->ah_sc->pdev;
-	u32 turbo, mode, clock, bus_flags;
-	int ret;
-
-	turbo = 0;
-	mode = 0;
-	clock = 0;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	/* Wakeup the device */
-	ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
-	if (ret) {
-		ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n");
-		return ret;
-	}
-
-	if (ah->ah_version != AR5K_AR5210) {
-		/*
-		 * Get channel mode flags
-		 */
-
-		if (ah->ah_radio >= AR5K_RF5112) {
-			mode = AR5K_PHY_MODE_RAD_RF5112;
-			clock = AR5K_PHY_PLL_RF5112;
-		} else {
-			mode = AR5K_PHY_MODE_RAD_RF5111;	/*Zero*/
-			clock = AR5K_PHY_PLL_RF5111;		/*Zero*/
-		}
-
-		if (flags & CHANNEL_2GHZ) {
-			mode |= AR5K_PHY_MODE_FREQ_2GHZ;
-			clock |= AR5K_PHY_PLL_44MHZ;
-
-			if (flags & CHANNEL_CCK) {
-				mode |= AR5K_PHY_MODE_MOD_CCK;
-			} else if (flags & CHANNEL_OFDM) {
-				/* XXX Dynamic OFDM/CCK is not supported by the
-				 * AR5211 so we set MOD_OFDM for plain g (no
-				 * CCK headers) operation. We need to test
-				 * this, 5211 might support ofdm-only g after
-				 * all, there are also initial register values
-				 * in the code for g mode (see initvals.c). */
-				if (ah->ah_version == AR5K_AR5211)
-					mode |= AR5K_PHY_MODE_MOD_OFDM;
-				else
-					mode |= AR5K_PHY_MODE_MOD_DYN;
-			} else {
-				ATH5K_ERR(ah->ah_sc,
-					"invalid radio modulation mode\n");
-				return -EINVAL;
-			}
-		} else if (flags & CHANNEL_5GHZ) {
-			mode |= AR5K_PHY_MODE_FREQ_5GHZ;
-			clock |= AR5K_PHY_PLL_40MHZ;
-
-			if (flags & CHANNEL_OFDM)
-				mode |= AR5K_PHY_MODE_MOD_OFDM;
-			else {
-				ATH5K_ERR(ah->ah_sc,
-					"invalid radio modulation mode\n");
-				return -EINVAL;
-			}
-		} else {
-			ATH5K_ERR(ah->ah_sc, "invalid radio frequency mode\n");
-			return -EINVAL;
-		}
-
-		if (flags & CHANNEL_TURBO)
-			turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT;
-	} else { /* Reset the device */
-
-		/* ...enable Atheros turbo mode if requested */
-		if (flags & CHANNEL_TURBO)
-			ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE,
-					AR5K_PHY_TURBO);
-	}
-
-	/* reseting PCI on PCI-E cards results card to hang
-	 * and always return 0xffff... so we ingore that flag
-	 * for PCI-E cards */
-	bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI;
-
-	/* Reset chipset */
-	ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
-		AR5K_RESET_CTL_BASEBAND | bus_flags);
-	if (ret) {
-		ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n");
-		return -EIO;
-	}
-
-	if (ah->ah_version == AR5K_AR5210)
-		udelay(2300);
-
-	/* ...wakeup again!*/
-	ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
-	if (ret) {
-		ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n");
-		return ret;
-	}
-
-	/* ...final warm reset */
-	if (ath5k_hw_nic_reset(ah, 0)) {
-		ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n");
-		return -EIO;
-	}
-
-	if (ah->ah_version != AR5K_AR5210) {
-		/* ...set the PHY operating mode */
-		ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL);
-		udelay(300);
-
-		ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE);
-		ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO);
-	}
-
-	return 0;
-}
-
-/*
- * Get the rate table for a specific operation mode
- */
-const struct ath5k_rate_table *ath5k_hw_get_rate_table(struct ath5k_hw *ah,
-		unsigned int mode)
-{
-	ATH5K_TRACE(ah->ah_sc);
-
-	if (!test_bit(mode, ah->ah_capabilities.cap_mode))
-		return NULL;
-
-	/* Get rate tables */
-	switch (mode) {
-	case AR5K_MODE_11A:
-		return &ath5k_rt_11a;
-	case AR5K_MODE_11A_TURBO:
-		return &ath5k_rt_turbo;
-	case AR5K_MODE_11B:
-		return &ath5k_rt_11b;
-	case AR5K_MODE_11G:
-		return &ath5k_rt_11g;
-	case AR5K_MODE_11G_TURBO:
-		return &ath5k_rt_xr;
-	}
-
-	return NULL;
-}
-
-/*
- * Free the ath5k_hw struct
- */
-void ath5k_hw_detach(struct ath5k_hw *ah)
-{
-	ATH5K_TRACE(ah->ah_sc);
-
-	__set_bit(ATH_STAT_INVALID, ah->ah_sc->status);
-
-	if (ah->ah_rf_banks != NULL)
-		kfree(ah->ah_rf_banks);
-
-	/* assume interrupts are down */
-	kfree(ah);
-}
-
-/****************************\
-  Reset function and helpers
-\****************************/
-
-/**
- * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212
- *
- * @ah: the &struct ath5k_hw
- * @channel: the currently set channel upon reset
- *
- * Write the OFDM timings for the AR5212 upon reset. This is a helper for
- * ath5k_hw_reset(). This seems to tune the PLL a specified frequency
- * depending on the bandwidth of the channel.
- *
- */
-static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
-	struct ieee80211_channel *channel)
-{
-	/* Get exponent and mantissa and set it */
-	u32 coef_scaled, coef_exp, coef_man,
-		ds_coef_exp, ds_coef_man, clock;
-
-	if (!(ah->ah_version == AR5K_AR5212) ||
-		!(channel->hw_value & CHANNEL_OFDM))
-		BUG();
-
-	/* Seems there are two PLLs, one for baseband sampling and one
-	 * for tuning. Tuning basebands are 40 MHz or 80MHz when in
-	 * turbo. */
-	clock = channel->hw_value & CHANNEL_TURBO ? 80 : 40;
-	coef_scaled = ((5 * (clock << 24)) / 2) /
-	channel->center_freq;
-
-	for (coef_exp = 31; coef_exp > 0; coef_exp--)
-		if ((coef_scaled >> coef_exp) & 0x1)
-			break;
-
-	if (!coef_exp)
-		return -EINVAL;
-
-	coef_exp = 14 - (coef_exp - 24);
-	coef_man = coef_scaled +
-		(1 << (24 - coef_exp - 1));
-	ds_coef_man = coef_man >> (24 - coef_exp);
-	ds_coef_exp = coef_exp - 16;
-
-	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
-		AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man);
-	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
-		AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp);
-
-	return 0;
-}
-
-/**
- * ath5k_hw_write_rate_duration - set rate duration during hw resets
- *
- * @ah: the &struct ath5k_hw
- * @mode: one of enum ath5k_driver_mode
- *
- * Write the rate duration table for the current mode upon hw reset. This
- * is a helper for ath5k_hw_reset(). It seems all this is doing is setting
- * an ACK timeout for the hardware for the current mode for each rate. The
- * rates which are capable of short preamble (802.11b rates 2Mbps, 5.5Mbps,
- * and 11Mbps) have another register for the short preamble ACK timeout
- * calculation.
- *
- */
-static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah,
-       unsigned int mode)
-{
-	struct ath5k_softc *sc = ah->ah_sc;
-	const struct ath5k_rate_table *rt;
-	struct ieee80211_rate srate = {};
-	unsigned int i;
-
-	/* Get rate table for the current operating mode */
-	rt = ath5k_hw_get_rate_table(ah, mode);
-
-	/* Write rate duration table */
-	for (i = 0; i < rt->rate_count; i++) {
-		const struct ath5k_rate *rate, *control_rate;
-
-		u32 reg;
-		u16 tx_time;
-
-		rate = &rt->rates[i];
-		control_rate = &rt->rates[rate->control_rate];
-
-		/* Set ACK timeout */
-		reg = AR5K_RATE_DUR(rate->rate_code);
-
-		srate.bitrate = control_rate->rate_kbps/100;
-
-		/* An ACK frame consists of 10 bytes. If you add the FCS,
-		 * which ieee80211_generic_frame_duration() adds,
-		 * its 14 bytes. Note we use the control rate and not the
-		 * actual rate for this rate. See mac80211 tx.c
-		 * ieee80211_duration() for a brief description of
-		 * what rate we should choose to TX ACKs. */
-		tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw,
-							sc->vif, 10, &srate));
-
-		ath5k_hw_reg_write(ah, tx_time, reg);
-
-		if (!HAS_SHPREAMBLE(i))
-			continue;
-
-		/*
-		 * We're not distinguishing short preamble here,
-		 * This is true, all we'll get is a longer value here
-		 * which is not necessarilly bad. We could use
-		 * export ieee80211_frame_duration() but that needs to be
-		 * fixed first to be properly used by mac802111 drivers:
-		 *
-		 *  - remove erp stuff and let the routine figure ofdm
-		 *    erp rates
-		 *  - remove passing argument ieee80211_local as
-		 *    drivers don't have access to it
-		 *  - move drivers using ieee80211_generic_frame_duration()
-		 *    to this
-		 */
-		ath5k_hw_reg_write(ah, tx_time,
-			reg + (AR5K_SET_SHORT_PREAMBLE << 2));
-	}
-}
-
-/*
- * Main reset function
- */
-int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
-	struct ieee80211_channel *channel, bool change_channel)
-{
-	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-	struct pci_dev *pdev = ah->ah_sc->pdev;
-	u32 data, s_seq, s_ant, s_led[3], dma_size;
-	unsigned int i, mode, freq, ee_mode, ant[2];
-	int ret;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	s_seq = 0;
-	s_ant = 0;
-	ee_mode = 0;
-	freq = 0;
-	mode = 0;
-
-	/*
-	 * Save some registers before a reset
-	 */
-	/*DCU/Antenna selection not available on 5210*/
-	if (ah->ah_version != AR5K_AR5210) {
-		if (change_channel) {
-			/* Seq number for queue 0 -do this for all queues ? */
-			s_seq = ath5k_hw_reg_read(ah,
-					AR5K_QUEUE_DFS_SEQNUM(0));
-			/*Default antenna*/
-			s_ant = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA);
-		}
-	}
-
-	/*GPIOs*/
-	s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) & AR5K_PCICFG_LEDSTATE;
-	s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR);
-	s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO);
-
-	if (change_channel && ah->ah_rf_banks != NULL)
-		ath5k_hw_get_rf_gain(ah);
-
-
-	/*Wakeup the device*/
-	ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false);
-	if (ret)
-		return ret;
-
-	/*
-	 * Initialize operating mode
-	 */
-	ah->ah_op_mode = op_mode;
-
-	/*
-	 * 5111/5112 Settings
-	 * 5210 only comes with RF5110
-	 */
-	if (ah->ah_version != AR5K_AR5210) {
-		if (ah->ah_radio != AR5K_RF5111 &&
-			ah->ah_radio != AR5K_RF5112 &&
-			ah->ah_radio != AR5K_RF5413 &&
-			ah->ah_radio != AR5K_RF2413 &&
-			ah->ah_radio != AR5K_RF2425) {
-			ATH5K_ERR(ah->ah_sc,
-				"invalid phy radio: %u\n", ah->ah_radio);
-			return -EINVAL;
-		}
-
-		switch (channel->hw_value & CHANNEL_MODES) {
-		case CHANNEL_A:
-			mode = AR5K_MODE_11A;
-			freq = AR5K_INI_RFGAIN_5GHZ;
-			ee_mode = AR5K_EEPROM_MODE_11A;
-			break;
-		case CHANNEL_G:
-			mode = AR5K_MODE_11G;
-			freq = AR5K_INI_RFGAIN_2GHZ;
-			ee_mode = AR5K_EEPROM_MODE_11G;
-			break;
-		case CHANNEL_B:
-			mode = AR5K_MODE_11B;
-			freq = AR5K_INI_RFGAIN_2GHZ;
-			ee_mode = AR5K_EEPROM_MODE_11B;
-			break;
-		case CHANNEL_T:
-			mode = AR5K_MODE_11A_TURBO;
-			freq = AR5K_INI_RFGAIN_5GHZ;
-			ee_mode = AR5K_EEPROM_MODE_11A;
-			break;
-		/*Is this ok on 5211 too ?*/
-		case CHANNEL_TG:
-			mode = AR5K_MODE_11G_TURBO;
-			freq = AR5K_INI_RFGAIN_2GHZ;
-			ee_mode = AR5K_EEPROM_MODE_11G;
-			break;
-		case CHANNEL_XR:
-			if (ah->ah_version == AR5K_AR5211) {
-				ATH5K_ERR(ah->ah_sc,
-					"XR mode not available on 5211");
-				return -EINVAL;
-			}
-			mode = AR5K_MODE_XR;
-			freq = AR5K_INI_RFGAIN_5GHZ;
-			ee_mode = AR5K_EEPROM_MODE_11A;
-			break;
-		default:
-			ATH5K_ERR(ah->ah_sc,
-				"invalid channel: %d\n", channel->center_freq);
-			return -EINVAL;
-		}
-
-		/* PHY access enable */
-		ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
-
-	}
-
-	ret = ath5k_hw_write_initvals(ah, mode, change_channel);
-	if (ret)
-		return ret;
-
-	/*
-	 * 5211/5212 Specific
-	 */
-	if (ah->ah_version != AR5K_AR5210) {
-		/*
-		 * Write initial RF gain settings
-		 * This should work for both 5111/5112
-		 */
-		ret = ath5k_hw_rfgain(ah, freq);
-		if (ret)
-			return ret;
-
-		mdelay(1);
-
-		/*
-		 * Write some more initial register settings
-		 */
-		if (ah->ah_version == AR5K_AR5212) {
-			ath5k_hw_reg_write(ah, 0x0002a002, 0x982c);
-
-			if (channel->hw_value == CHANNEL_G)
-				if (ah->ah_mac_srev < AR5K_SREV_VER_AR2413)
-					ath5k_hw_reg_write(ah, 0x00f80d80,
-								0x994c);
-				else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2424)
-					ath5k_hw_reg_write(ah, 0x00380140,
-								0x994c);
-				else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2425)
-					ath5k_hw_reg_write(ah, 0x00fc0ec0,
-								0x994c);
-				else /* 2425 */
-					ath5k_hw_reg_write(ah, 0x00fc0fc0,
-								0x994c);
-			else
-				ath5k_hw_reg_write(ah, 0x00000000, 0x994c);
-
-			/* Some bits are disabled here, we know nothing about
-			 * register 0xa228 yet, most of the times this ends up
-			 * with a value 0x9b5 -haven't seen any dump with
-			 * a different value- */
-			/* Got this from decompiling binary HAL */
-			data = ath5k_hw_reg_read(ah, 0xa228);
-			data &= 0xfffffdff;
-			ath5k_hw_reg_write(ah, data, 0xa228);
-
-			data = ath5k_hw_reg_read(ah, 0xa228);
-			data &= 0xfffe03ff;
-			ath5k_hw_reg_write(ah, data, 0xa228);
-			data = 0;
-
-			/* Just write 0x9b5 ? */
-			/* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */
-			ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK);
-			ath5k_hw_reg_write(ah, 0x00000000, 0xa254);
-			ath5k_hw_reg_write(ah, 0x0000000e, AR5K_PHY_SCAL);
-		}
-
-		/* Fix for first revision of the RF5112 RF chipset */
-		if (ah->ah_radio >= AR5K_RF5112 &&
-				ah->ah_radio_5ghz_revision <
-				AR5K_SREV_RAD_5112A) {
-			ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD,
-					AR5K_PHY_CCKTXCTL);
-			if (channel->hw_value & CHANNEL_5GHZ)
-				data = 0xffb81020;
-			else
-				data = 0xffb80d20;
-			ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL);
-			data = 0;
-		}
-
-		/*
-		 * Set TX power (FIXME)
-		 */
-		ret = ath5k_hw_txpower(ah, channel, AR5K_TUNE_DEFAULT_TXPOWER);
-		if (ret)
-			return ret;
-
-		/* Write rate duration table only on AR5212 and if
-		 * virtual interface has already been brought up
-		 * XXX: rethink this after new mode changes to
-		 * mac80211 are integrated */
-		if (ah->ah_version == AR5K_AR5212 &&
-			ah->ah_sc->vif != NULL)
-			ath5k_hw_write_rate_duration(ah, mode);
-
-		/*
-		 * Write RF registers
-		 */
-		ret = ath5k_hw_rfregs(ah, channel, mode);
-		if (ret)
-			return ret;
-
-		/*
-		 * Configure additional registers
-		 */
-
-		/* Write OFDM timings on 5212*/
-		if (ah->ah_version == AR5K_AR5212 &&
-			channel->hw_value & CHANNEL_OFDM) {
-			ret = ath5k_hw_write_ofdm_timings(ah, channel);
-			if (ret)
-				return ret;
-		}
-
-		/*Enable/disable 802.11b mode on 5111
-		(enable 2111 frequency converter + CCK)*/
-		if (ah->ah_radio == AR5K_RF5111) {
-			if (mode == AR5K_MODE_11B)
-				AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG,
-				    AR5K_TXCFG_B_MODE);
-			else
-				AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
-				    AR5K_TXCFG_B_MODE);
-		}
-
-		/*
-		 * Set channel and calibrate the PHY
-		 */
-		ret = ath5k_hw_channel(ah, channel);
-		if (ret)
-			return ret;
-
-		/* Set antenna mode */
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_ANT_CTL,
-			ah->ah_antenna[ee_mode][0], 0xfffffc06);
-
-		/*
-		 * In case a fixed antenna was set as default
-		 * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE
-		 * registers.
-		 */
-		if (s_ant != 0){
-			if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */
-				ant[0] = ant[1] = AR5K_ANT_FIXED_A;
-			else	/* 2 - Aux */
-				ant[0] = ant[1] = AR5K_ANT_FIXED_B;
-		} else {
-			ant[0] = AR5K_ANT_FIXED_A;
-			ant[1] = AR5K_ANT_FIXED_B;
-		}
-
-		ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]],
-			AR5K_PHY_ANT_SWITCH_TABLE_0);
-		ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]],
-			AR5K_PHY_ANT_SWITCH_TABLE_1);
-
-		/* Commit values from EEPROM */
-		if (ah->ah_radio == AR5K_RF5111)
-			AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL,
-			    AR5K_PHY_FRAME_CTL_TX_CLIP, ee->ee_tx_clip);
-
-		ath5k_hw_reg_write(ah,
-			AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]),
-			AR5K_PHY_NFTHRES);
-
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_SETTLING,
-			(ee->ee_switch_settling[ee_mode] << 7) & 0x3f80,
-			0xffffc07f);
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_GAIN,
-			(ee->ee_ant_tx_rx[ee_mode] << 12) & 0x3f000,
-			0xfffc0fff);
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_DESIRED_SIZE,
-			(ee->ee_adc_desired_size[ee_mode] & 0x00ff) |
-			((ee->ee_pga_desired_size[ee_mode] << 8) & 0xff00),
-			0xffff0000);
-
-		ath5k_hw_reg_write(ah,
-			(ee->ee_tx_end2xpa_disable[ee_mode] << 24) |
-			(ee->ee_tx_end2xpa_disable[ee_mode] << 16) |
-			(ee->ee_tx_frm2xpa_enable[ee_mode] << 8) |
-			(ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4);
-
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_RF_CTL3,
-			ee->ee_tx_end2xlna_enable[ee_mode] << 8, 0xffff00ff);
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_NF,
-			(ee->ee_thr_62[ee_mode] << 12) & 0x7f000, 0xfff80fff);
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_OFDM_SELFCORR, 4, 0xffffff01);
-
-		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
-		    AR5K_PHY_IQ_CORR_ENABLE |
-		    (ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) |
-		    ee->ee_q_cal[ee_mode]);
-
-		if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
-			AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ,
-				AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX,
-				ee->ee_margin_tx_rx[ee_mode]);
-
-	} else {
-		mdelay(1);
-		/* Disable phy and wait */
-		ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT);
-		mdelay(1);
-	}
-
-	/*
-	 * Restore saved values
-	 */
-	/*DCU/Antenna selection not available on 5210*/
-	if (ah->ah_version != AR5K_AR5210) {
-		ath5k_hw_reg_write(ah, s_seq, AR5K_QUEUE_DFS_SEQNUM(0));
-		ath5k_hw_reg_write(ah, s_ant, AR5K_DEFAULT_ANTENNA);
-	}
-	AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]);
-	ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR);
-	ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO);
-
-	/*
-	 * Misc
-	 */
-	/* XXX: add ah->aid once mac80211 gives this to us */
-	ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
-
-	ath5k_hw_set_opmode(ah);
-	/*PISR/SISR Not available on 5210*/
-	if (ah->ah_version != AR5K_AR5210) {
-		ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR);
-		/* If we later allow tuning for this, store into sc structure */
-		data = AR5K_TUNE_RSSI_THRES |
-			AR5K_TUNE_BMISS_THRES << AR5K_RSSI_THR_BMISS_S;
-		ath5k_hw_reg_write(ah, data, AR5K_RSSI_THR);
-	}
-
-	/*
-	 * Set Rx/Tx DMA Configuration
-	 *
-	 * Set maximum DMA size (512) except for PCI-E cards since
-	 * it causes rx overruns and tx errors (tested on 5424 but since
-	 * rx overruns also occur on 5416/5418 with madwifi we set 128
-	 * for all PCI-E cards to be safe).
-	 *
-	 * In dumps this is 128 for allchips.
-	 *
-	 * XXX: need to check 5210 for this
-	 * TODO: Check out tx triger level, it's always 64 on dumps but I
-	 * guess we can tweak it and see how it goes ;-)
-	 */
-	dma_size = (pdev->is_pcie) ? AR5K_DMASIZE_128B : AR5K_DMASIZE_512B;
-	if (ah->ah_version != AR5K_AR5210) {
-		AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
-			AR5K_TXCFG_SDMAMR, dma_size);
-		AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG,
-			AR5K_RXCFG_SDMAMW, dma_size);
-	}
-
-	/*
-	 * Enable the PHY and wait until completion
-	 */
-	ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
-
-	/*
-	 * On 5211+ read activation -> rx delay
-	 * and use it.
-	 */
-	if (ah->ah_version != AR5K_AR5210) {
-		data = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
-			AR5K_PHY_RX_DELAY_M;
-		data = (channel->hw_value & CHANNEL_CCK) ?
-			((data << 2) / 22) : (data / 10);
-
-		udelay(100 + (2 * data));
-		data = 0;
-	} else {
-		mdelay(1);
-	}
-
-	/*
-	 * Perform ADC test (?)
-	 */
-	data = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
-	ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
-	for (i = 0; i <= 20; i++) {
-		if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
-			break;
-		udelay(200);
-	}
-	ath5k_hw_reg_write(ah, data, AR5K_PHY_TST1);
-	data = 0;
-
-	/*
-	 * Start automatic gain calibration
-	 *
-	 * During AGC calibration RX path is re-routed to
-	 * a signal detector so we don't receive anything.
-	 *
-	 * This method is used to calibrate some static offsets
-	 * used together with on-the fly I/Q calibration (the
-	 * one performed via ath5k_hw_phy_calibrate), that doesn't
-	 * interrupt rx path.
-	 *
-	 * If we are in a noisy environment AGC calibration may time
-	 * out.
-	 */
-	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
-				AR5K_PHY_AGCCTL_CAL);
-
-	/* At the same time start I/Q calibration for QAM constellation
-	 * -no need for CCK- */
-	ah->ah_calibration = false;
-	if (!(mode == AR5K_MODE_11B)) {
-		ah->ah_calibration = true;
-		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
-				AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
-		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
-				AR5K_PHY_IQ_RUN);
-	}
-
-	/* Wait for gain calibration to finish (we check for I/Q calibration
-	 * during ath5k_phy_calibrate) */
-	if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
-			AR5K_PHY_AGCCTL_CAL, 0, false)) {
-		ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n",
-			channel->center_freq);
-		return -EAGAIN;
-	}
-
-	/*
-	 * Start noise floor calibration
-	 *
-	 * If we run NF calibration before AGC, it always times out.
-	 * Binary HAL starts NF and AGC calibration at the same time
-	 * and only waits for AGC to finish. I believe that's wrong because
-	 * during NF calibration, rx path is also routed to a detector, so if
-	 * it doesn't finish we won't have RX.
-	 *
-	 * XXX: Find an interval that's OK for all cards...
-	 */
-	ret = ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
-	if (ret)
-		return ret;
-
-	/*
-	 * Reset queues and start beacon timers at the end of the reset routine
-	 */
-	for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) {
-		/*No QCU on 5210*/
-		if (ah->ah_version != AR5K_AR5210)
-			AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(i), i);
-
-		ret = ath5k_hw_reset_tx_queue(ah, i);
-		if (ret) {
-			ATH5K_ERR(ah->ah_sc,
-				"failed to reset TX queue #%d\n", i);
-			return ret;
-		}
-	}
-
-	/* Pre-enable interrupts on 5211/5212*/
-	if (ah->ah_version != AR5K_AR5210)
-		ath5k_hw_set_intr(ah, AR5K_INT_RX | AR5K_INT_TX |
-				AR5K_INT_FATAL);
-
-	/*
-	 * Set RF kill flags if supported by the device (read from the EEPROM)
-	 * Disable gpio_intr for now since it results system hang.
-	 * TODO: Handle this in ath5k_intr
-	 */
-#if 0
-	if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) {
-		ath5k_hw_set_gpio_input(ah, 0);
-		ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, 0);
-		if (ah->ah_gpio[0] == 0)
-			ath5k_hw_set_gpio_intr(ah, 0, 1);
-		else
-			ath5k_hw_set_gpio_intr(ah, 0, 0);
-	}
-#endif
-
-	/*
-	 * Set the 32MHz reference clock on 5212 phy clock sleep register
-	 *
-	 * TODO: Find out how to switch to external 32Khz clock to save power
-	 */
-	if (ah->ah_version == AR5K_AR5212) {
-		ath5k_hw_reg_write(ah, AR5K_PHY_SCR_32MHZ, AR5K_PHY_SCR);
-		ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT);
-		ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ, AR5K_PHY_SCAL);
-		ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK);
-		ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY);
-		ath5k_hw_reg_write(ah, ah->ah_phy_spending, AR5K_PHY_SPENDING);
-
-		data = ath5k_hw_reg_read(ah, AR5K_USEC_5211) & 0xffffc07f ;
-		data |= (ah->ah_phy_spending == AR5K_PHY_SPENDING_18) ?
-						0x00000f80 : 0x00001380 ;
-		ath5k_hw_reg_write(ah, data, AR5K_USEC_5211);
-		data = 0;
-	}
-
-	if (ah->ah_version == AR5K_AR5212) {
-		ath5k_hw_reg_write(ah, 0x000100aa, 0x8118);
-		ath5k_hw_reg_write(ah, 0x00003210, 0x811c);
-		ath5k_hw_reg_write(ah, 0x00000052, 0x8108);
-		if (ah->ah_mac_srev >= AR5K_SREV_VER_AR2413)
-			ath5k_hw_reg_write(ah, 0x00000004, 0x8120);
-	}
-
-	/*
-	 * Disable beacons and reset the register
-	 */
-	AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE |
-			AR5K_BEACON_RESET_TSF);
-
-	return 0;
-}
-
-/*
- * Reset chipset
- */
-static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val)
-{
-	int ret;
-	u32 mask = val ? val : ~0U;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	/* Read-and-clear RX Descriptor Pointer*/
-	ath5k_hw_reg_read(ah, AR5K_RXDP);
-
-	/*
-	 * Reset the device and wait until success
-	 */
-	ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL);
-
-	/* Wait at least 128 PCI clocks */
-	udelay(15);
-
-	if (ah->ah_version == AR5K_AR5210) {
-		val &= AR5K_RESET_CTL_CHIP;
-		mask &= AR5K_RESET_CTL_CHIP;
-	} else {
-		val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
-		mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
-	}
-
-	ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false);
-
-	/*
-	 * Reset configuration register (for hw byte-swap). Note that this
-	 * is only set for big endian. We do the necessary magic in
-	 * AR5K_INIT_CFG.
-	 */
-	if ((val & AR5K_RESET_CTL_PCU) == 0)
-		ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG);
-
-	return ret;
-}
-
-/*
- * Power management functions
- */
-
-/*
- * Sleep control
- */
-int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
-		bool set_chip, u16 sleep_duration)
-{
-	unsigned int i;
-	u32 staid, data;
-
-	ATH5K_TRACE(ah->ah_sc);
-	staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1);
-
-	switch (mode) {
-	case AR5K_PM_AUTO:
-		staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA;
-		/* fallthrough */
-	case AR5K_PM_NETWORK_SLEEP:
-		if (set_chip)
-			ath5k_hw_reg_write(ah,
-				AR5K_SLEEP_CTL_SLE_ALLOW |
-				sleep_duration,
-				AR5K_SLEEP_CTL);
-
-		staid |= AR5K_STA_ID1_PWR_SV;
-		break;
-
-	case AR5K_PM_FULL_SLEEP:
-		if (set_chip)
-			ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP,
-				AR5K_SLEEP_CTL);
-
-		staid |= AR5K_STA_ID1_PWR_SV;
-		break;
-
-	case AR5K_PM_AWAKE:
-
-		staid &= ~AR5K_STA_ID1_PWR_SV;
-
-		if (!set_chip)
-			goto commit;
-
-		/* Preserve sleep duration */
-		data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL);
-		if( data & 0xffc00000 ){
-			data = 0;
-		} else {
-			data = data & 0xfffcffff;
-		}
-
-		ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
-		udelay(15);
-
-		for (i = 50; i > 0; i--) {
-			/* Check if the chip did wake up */
-			if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) &
-					AR5K_PCICFG_SPWR_DN) == 0)
-				break;
-
-			/* Wait a bit and retry */
-			udelay(200);
-			ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
-		}
-
-		/* Fail if the chip didn't wake up */
-		if (i <= 0)
-			return -EIO;
-
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-commit:
-	ah->ah_power_mode = mode;
-	ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1);
-
-	return 0;
-}
-
-/***********************\
-  DMA Related Functions
-\***********************/
-
-/*
- * Receive functions
- */
-
-/*
- * Start DMA receive
- */
-void ath5k_hw_start_rx(struct ath5k_hw *ah)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR);
-	ath5k_hw_reg_read(ah, AR5K_CR);
-}
-
-/*
- * Stop DMA receive
- */
-int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah)
-{
-	unsigned int i;
-
-	ATH5K_TRACE(ah->ah_sc);
-	ath5k_hw_reg_write(ah, AR5K_CR_RXD, AR5K_CR);
-
-	/*
-	 * It may take some time to disable the DMA receive unit
-	 */
-	for (i = 2000; i > 0 &&
-			(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0;
-			i--)
-		udelay(10);
-
-	return i ? 0 : -EBUSY;
-}
-
-/*
- * Get the address of the RX Descriptor
- */
-u32 ath5k_hw_get_rx_buf(struct ath5k_hw *ah)
-{
-	return ath5k_hw_reg_read(ah, AR5K_RXDP);
-}
-
-/*
- * Set the address of the RX Descriptor
- */
-void ath5k_hw_put_rx_buf(struct ath5k_hw *ah, u32 phys_addr)
-{
-	ATH5K_TRACE(ah->ah_sc);
-
-	/*TODO:Shouldn't we check if RX is enabled first ?*/
-	ath5k_hw_reg_write(ah, phys_addr, AR5K_RXDP);
-}
-
-/*
- * Transmit functions
- */
-
-/*
- * Start DMA transmit for a specific queue
- * (see also QCU/DCU functions)
- */
-int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue)
-{
-	u32 tx_queue;
-
-	ATH5K_TRACE(ah->ah_sc);
-	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
-
-	/* Return if queue is declared inactive */
-	if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
-		return -EIO;
-
-	if (ah->ah_version == AR5K_AR5210) {
-		tx_queue = ath5k_hw_reg_read(ah, AR5K_CR);
-
-		/*
-		 * Set the queue by type on 5210
-		 */
-		switch (ah->ah_txq[queue].tqi_type) {
-		case AR5K_TX_QUEUE_DATA:
-			tx_queue |= AR5K_CR_TXE0 & ~AR5K_CR_TXD0;
-			break;
-		case AR5K_TX_QUEUE_BEACON:
-			tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1;
-			ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE,
-					AR5K_BSR);
-			break;
-		case AR5K_TX_QUEUE_CAB:
-			tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1;
-			ath5k_hw_reg_write(ah, AR5K_BCR_TQ1FV | AR5K_BCR_TQ1V |
-				AR5K_BCR_BDMAE, AR5K_BSR);
-			break;
-		default:
-			return -EINVAL;
-		}
-		/* Start queue */
-		ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
-		ath5k_hw_reg_read(ah, AR5K_CR);
-	} else {
-		/* Return if queue is disabled */
-		if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue))
-			return -EIO;
-
-		/* Start queue */
-		AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXE, queue);
-	}
-
-	return 0;
-}
-
-/*
- * Stop DMA transmit for a specific queue
- * (see also QCU/DCU functions)
- */
-int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
-{
-	unsigned int i = 100;
-	u32 tx_queue, pending;
-
-	ATH5K_TRACE(ah->ah_sc);
-	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
-
-	/* Return if queue is declared inactive */
-	if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
-		return -EIO;
-
-	if (ah->ah_version == AR5K_AR5210) {
-		tx_queue = ath5k_hw_reg_read(ah, AR5K_CR);
-
-		/*
-		 * Set by queue type
-		 */
-		switch (ah->ah_txq[queue].tqi_type) {
-		case AR5K_TX_QUEUE_DATA:
-			tx_queue |= AR5K_CR_TXD0 & ~AR5K_CR_TXE0;
-			break;
-		case AR5K_TX_QUEUE_BEACON:
-		case AR5K_TX_QUEUE_CAB:
-			/* XXX Fix me... */
-			tx_queue |= AR5K_CR_TXD1 & ~AR5K_CR_TXD1;
-			ath5k_hw_reg_write(ah, 0, AR5K_BSR);
-			break;
-		default:
-			return -EINVAL;
-		}
-
-		/* Stop queue */
-		ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
-		ath5k_hw_reg_read(ah, AR5K_CR);
-	} else {
-		/*
-		 * Schedule TX disable and wait until queue is empty
-		 */
-		AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXD, queue);
-
-		/*Check for pending frames*/
-		do {
-			pending = ath5k_hw_reg_read(ah,
-				AR5K_QUEUE_STATUS(queue)) &
-				AR5K_QCU_STS_FRMPENDCNT;
-			udelay(100);
-		} while (--i && pending);
-
-		/* Clear register */
-		ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD);
-		if (pending)
-			return -EBUSY;
-	}
-
-	/* TODO: Check for success else return error */
-	return 0;
-}
-
-/*
- * Get the address of the TX Descriptor for a specific queue
- * (see also QCU/DCU functions)
- */
-u32 ath5k_hw_get_tx_buf(struct ath5k_hw *ah, unsigned int queue)
-{
-	u16 tx_reg;
-
-	ATH5K_TRACE(ah->ah_sc);
-	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
-
-	/*
-	 * Get the transmit queue descriptor pointer from the selected queue
-	 */
-	/*5210 doesn't have QCU*/
-	if (ah->ah_version == AR5K_AR5210) {
-		switch (ah->ah_txq[queue].tqi_type) {
-		case AR5K_TX_QUEUE_DATA:
-			tx_reg = AR5K_NOQCU_TXDP0;
-			break;
-		case AR5K_TX_QUEUE_BEACON:
-		case AR5K_TX_QUEUE_CAB:
-			tx_reg = AR5K_NOQCU_TXDP1;
-			break;
-		default:
-			return 0xffffffff;
-		}
-	} else {
-		tx_reg = AR5K_QUEUE_TXDP(queue);
-	}
-
-	return ath5k_hw_reg_read(ah, tx_reg);
-}
-
-/*
- * Set the address of the TX Descriptor for a specific queue
- * (see also QCU/DCU functions)
- */
-int ath5k_hw_put_tx_buf(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr)
-{
-	u16 tx_reg;
-
-	ATH5K_TRACE(ah->ah_sc);
-	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
-
-	/*
-	 * Set the transmit queue descriptor pointer register by type
-	 * on 5210
-	 */
-	if (ah->ah_version == AR5K_AR5210) {
-		switch (ah->ah_txq[queue].tqi_type) {
-		case AR5K_TX_QUEUE_DATA:
-			tx_reg = AR5K_NOQCU_TXDP0;
-			break;
-		case AR5K_TX_QUEUE_BEACON:
-		case AR5K_TX_QUEUE_CAB:
-			tx_reg = AR5K_NOQCU_TXDP1;
-			break;
-		default:
-			return -EINVAL;
-		}
-	} else {
-		/*
-		 * Set the transmit queue descriptor pointer for
-		 * the selected queue on QCU for 5211+
-		 * (this won't work if the queue is still active)
-		 */
-		if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue))
-			return -EIO;
-
-		tx_reg = AR5K_QUEUE_TXDP(queue);
-	}
-
-	/* Set descriptor pointer */
-	ath5k_hw_reg_write(ah, phys_addr, tx_reg);
-
-	return 0;
-}
-
-/*
- * Update tx trigger level
- */
-int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase)
-{
-	u32 trigger_level, imr;
-	int ret = -EIO;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	/*
-	 * Disable interrupts by setting the mask
-	 */
-	imr = ath5k_hw_set_intr(ah, ah->ah_imr & ~AR5K_INT_GLOBAL);
-
-	/*TODO: Boundary check on trigger_level*/
-	trigger_level = AR5K_REG_MS(ath5k_hw_reg_read(ah, AR5K_TXCFG),
-			AR5K_TXCFG_TXFULL);
-
-	if (!increase) {
-		if (--trigger_level < AR5K_TUNE_MIN_TX_FIFO_THRES)
-			goto done;
-	} else
-		trigger_level +=
-			((AR5K_TUNE_MAX_TX_FIFO_THRES - trigger_level) / 2);
-
-	/*
-	 * Update trigger level on success
-	 */
-	if (ah->ah_version == AR5K_AR5210)
-		ath5k_hw_reg_write(ah, trigger_level, AR5K_TRIG_LVL);
-	else
-		AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
-				AR5K_TXCFG_TXFULL, trigger_level);
-
-	ret = 0;
-
-done:
-	/*
-	 * Restore interrupt mask
-	 */
-	ath5k_hw_set_intr(ah, imr);
-
-	return ret;
-}
-
-/*
- * Interrupt handling
- */
-
-/*
- * Check if we have pending interrupts
- */
-bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	return ath5k_hw_reg_read(ah, AR5K_INTPEND);
-}
-
-/*
- * Get interrupt mask (ISR)
- */
-int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
-{
-	u32 data;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	/*
-	 * Read interrupt status from the Interrupt Status register
-	 * on 5210
-	 */
-	if (ah->ah_version == AR5K_AR5210) {
-		data = ath5k_hw_reg_read(ah, AR5K_ISR);
-		if (unlikely(data == AR5K_INT_NOCARD)) {
-			*interrupt_mask = data;
-			return -ENODEV;
-		}
-	} else {
-		/*
-		 * Read interrupt status from the Read-And-Clear shadow register
-		 * Note: PISR/SISR Not available on 5210
-		 */
-		data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR);
-	}
-
-	/*
-	 * Get abstract interrupt mask (driver-compatible)
-	 */
-	*interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr;
-
-	if (unlikely(data == AR5K_INT_NOCARD))
-		return -ENODEV;
-
-	if (data & (AR5K_ISR_RXOK | AR5K_ISR_RXERR))
-		*interrupt_mask |= AR5K_INT_RX;
-
-	if (data & (AR5K_ISR_TXOK | AR5K_ISR_TXERR
-		| AR5K_ISR_TXDESC | AR5K_ISR_TXEOL))
-		*interrupt_mask |= AR5K_INT_TX;
-
-	if (ah->ah_version != AR5K_AR5210) {
-		/*HIU = Host Interface Unit (PCI etc)*/
-		if (unlikely(data & (AR5K_ISR_HIUERR)))
-			*interrupt_mask |= AR5K_INT_FATAL;
-
-		/*Beacon Not Ready*/
-		if (unlikely(data & (AR5K_ISR_BNR)))
-			*interrupt_mask |= AR5K_INT_BNR;
-	}
-
-	/*
-	 * XXX: BMISS interrupts may occur after association.
-	 * I found this on 5210 code but it needs testing. If this is
-	 * true we should disable them before assoc and re-enable them
-	 * after a successfull assoc + some jiffies.
-	 */
-#if 0
-	interrupt_mask &= ~AR5K_INT_BMISS;
-#endif
-
-	/*
-	 * In case we didn't handle anything,
-	 * print the register value.
-	 */
-	if (unlikely(*interrupt_mask == 0 && net_ratelimit()))
-		ATH5K_PRINTF("0x%08x\n", data);
-
-	return 0;
-}
-
-/*
- * Set interrupt mask
- */
-enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask)
-{
-	enum ath5k_int old_mask, int_mask;
-
-	/*
-	 * Disable card interrupts to prevent any race conditions
-	 * (they will be re-enabled afterwards).
-	 */
-	ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER);
-	ath5k_hw_reg_read(ah, AR5K_IER);
-
-	old_mask = ah->ah_imr;
-
-	/*
-	 * Add additional, chipset-dependent interrupt mask flags
-	 * and write them to the IMR (interrupt mask register).
-	 */
-	int_mask = new_mask & AR5K_INT_COMMON;
-
-	if (new_mask & AR5K_INT_RX)
-		int_mask |= AR5K_IMR_RXOK | AR5K_IMR_RXERR | AR5K_IMR_RXORN |
-			AR5K_IMR_RXDESC;
-
-	if (new_mask & AR5K_INT_TX)
-		int_mask |= AR5K_IMR_TXOK | AR5K_IMR_TXERR | AR5K_IMR_TXDESC |
-			AR5K_IMR_TXURN;
-
-	if (ah->ah_version != AR5K_AR5210) {
-		if (new_mask & AR5K_INT_FATAL) {
-			int_mask |= AR5K_IMR_HIUERR;
-			AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_MCABT |
-					AR5K_SIMR2_SSERR | AR5K_SIMR2_DPERR);
-		}
-	}
-
-	ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR);
-
-	/* Store new interrupt mask */
-	ah->ah_imr = new_mask;
-
-	/* ..re-enable interrupts */
-	ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER);
-	ath5k_hw_reg_read(ah, AR5K_IER);
-
-	return old_mask;
-}
-
-
-/*************************\
-  EEPROM access functions
-\*************************/
-
-/*
- * Read from eeprom
- */
-static int ath5k_hw_eeprom_read(struct ath5k_hw *ah, u32 offset, u16 *data)
-{
-	u32 status, timeout;
-
-	ATH5K_TRACE(ah->ah_sc);
-	/*
-	 * Initialize EEPROM access
-	 */
-	if (ah->ah_version == AR5K_AR5210) {
-		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE);
-		(void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset));
-	} else {
-		ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE);
-		AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
-				AR5K_EEPROM_CMD_READ);
-	}
-
-	for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) {
-		status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS);
-		if (status & AR5K_EEPROM_STAT_RDDONE) {
-			if (status & AR5K_EEPROM_STAT_RDERR)
-				return -EIO;
-			*data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) &
-					0xffff);
-			return 0;
-		}
-		udelay(15);
-	}
-
-	return -ETIMEDOUT;
-}
-
-/*
- * Write to eeprom - currently disabled, use at your own risk
- */
-#if 0
-static int ath5k_hw_eeprom_write(struct ath5k_hw *ah, u32 offset, u16 data)
-{
-
-	u32 status, timeout;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	/*
-	 * Initialize eeprom access
-	 */
-
-	if (ah->ah_version == AR5K_AR5210) {
-		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE);
-	} else {
-		AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
-				AR5K_EEPROM_CMD_RESET);
-	}
-
-	/*
-	 * Write data to data register
-	 */
-
-	if (ah->ah_version == AR5K_AR5210) {
-		ath5k_hw_reg_write(ah, data, AR5K_EEPROM_BASE + (4 * offset));
-	} else {
-		ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE);
-		ath5k_hw_reg_write(ah, data, AR5K_EEPROM_DATA);
-		AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
-				AR5K_EEPROM_CMD_WRITE);
-	}
-
-	/*
-	 * Check status
-	 */
-
-	for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) {
-		status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS);
-		if (status & AR5K_EEPROM_STAT_WRDONE) {
-			if (status & AR5K_EEPROM_STAT_WRERR)
-				return EIO;
-			return 0;
-		}
-		udelay(15);
-	}
-
-	ATH5K_ERR(ah->ah_sc, "EEPROM Write is disabled!");
-	return -EIO;
-}
-#endif
-
-/*
- * Translate binary channel representation in EEPROM to frequency
- */
-static u16 ath5k_eeprom_bin2freq(struct ath5k_hw *ah, u16 bin, unsigned int mode)
-{
-	u16 val;
-
-	if (bin == AR5K_EEPROM_CHANNEL_DIS)
-		return bin;
-
-	if (mode == AR5K_EEPROM_MODE_11A) {
-		if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2)
-			val = (5 * bin) + 4800;
-		else
-			val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 :
-				(bin * 10) + 5100;
-	} else {
-		if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2)
-			val = bin + 2300;
-		else
-			val = bin + 2400;
-	}
-
-	return val;
-}
-
-/*
- * Read antenna infos from eeprom
- */
-static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset,
-		unsigned int mode)
-{
-	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-	u32 o = *offset;
-	u16 val;
-	int ret, i = 0;
-
-	AR5K_EEPROM_READ(o++, val);
-	ee->ee_switch_settling[mode]	= (val >> 8) & 0x7f;
-	ee->ee_ant_tx_rx[mode]		= (val >> 2) & 0x3f;
-	ee->ee_ant_control[mode][i]	= (val << 4) & 0x3f;
-
-	AR5K_EEPROM_READ(o++, val);
-	ee->ee_ant_control[mode][i++]	|= (val >> 12) & 0xf;
-	ee->ee_ant_control[mode][i++]	= (val >> 6) & 0x3f;
-	ee->ee_ant_control[mode][i++]	= val & 0x3f;
-
-	AR5K_EEPROM_READ(o++, val);
-	ee->ee_ant_control[mode][i++]	= (val >> 10) & 0x3f;
-	ee->ee_ant_control[mode][i++]	= (val >> 4) & 0x3f;
-	ee->ee_ant_control[mode][i]	= (val << 2) & 0x3f;
-
-	AR5K_EEPROM_READ(o++, val);
-	ee->ee_ant_control[mode][i++]	|= (val >> 14) & 0x3;
-	ee->ee_ant_control[mode][i++]	= (val >> 8) & 0x3f;
-	ee->ee_ant_control[mode][i++]	= (val >> 2) & 0x3f;
-	ee->ee_ant_control[mode][i]	= (val << 4) & 0x3f;
-
-	AR5K_EEPROM_READ(o++, val);
-	ee->ee_ant_control[mode][i++]	|= (val >> 12) & 0xf;
-	ee->ee_ant_control[mode][i++]	= (val >> 6) & 0x3f;
-	ee->ee_ant_control[mode][i++]	= val & 0x3f;
-
-	/* Get antenna modes */
-	ah->ah_antenna[mode][0] =
-	    (ee->ee_ant_control[mode][0] << 4) | 0x1;
-	ah->ah_antenna[mode][AR5K_ANT_FIXED_A] =
-	     ee->ee_ant_control[mode][1] 	|
-	    (ee->ee_ant_control[mode][2] << 6) 	|
-	    (ee->ee_ant_control[mode][3] << 12) |
-	    (ee->ee_ant_control[mode][4] << 18) |
-	    (ee->ee_ant_control[mode][5] << 24);
-	ah->ah_antenna[mode][AR5K_ANT_FIXED_B] =
-	     ee->ee_ant_control[mode][6] 	|
-	    (ee->ee_ant_control[mode][7] << 6) 	|
-	    (ee->ee_ant_control[mode][8] << 12) |
-	    (ee->ee_ant_control[mode][9] << 18) |
-	    (ee->ee_ant_control[mode][10] << 24);
-
-	/* return new offset */
-	*offset = o;
-
-	return 0;
-}
-
-/*
- * Read supported modes from eeprom
- */
-static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset,
-		unsigned int mode)
-{
-	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-	u32 o = *offset;
-	u16 val;
-	int ret;
-
-	AR5K_EEPROM_READ(o++, val);
-	ee->ee_tx_end2xlna_enable[mode]	= (val >> 8) & 0xff;
-	ee->ee_thr_62[mode]		= val & 0xff;
-
-	if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2)
-		ee->ee_thr_62[mode] = mode == AR5K_EEPROM_MODE_11A ? 15 : 28;
-
-	AR5K_EEPROM_READ(o++, val);
-	ee->ee_tx_end2xpa_disable[mode]	= (val >> 8) & 0xff;
-	ee->ee_tx_frm2xpa_enable[mode]	= val & 0xff;
-
-	AR5K_EEPROM_READ(o++, val);
-	ee->ee_pga_desired_size[mode]	= (val >> 8) & 0xff;
-
-	if ((val & 0xff) & 0x80)
-		ee->ee_noise_floor_thr[mode] = -((((val & 0xff) ^ 0xff)) + 1);
-	else
-		ee->ee_noise_floor_thr[mode] = val & 0xff;
-
-	if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2)
-		ee->ee_noise_floor_thr[mode] =
-		    mode == AR5K_EEPROM_MODE_11A ? -54 : -1;
-
-	AR5K_EEPROM_READ(o++, val);
-	ee->ee_xlna_gain[mode]		= (val >> 5) & 0xff;
-	ee->ee_x_gain[mode]		= (val >> 1) & 0xf;
-	ee->ee_xpd[mode]		= val & 0x1;
-
-	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0)
-		ee->ee_fixed_bias[mode] = (val >> 13) & 0x1;
-
-	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_3) {
-		AR5K_EEPROM_READ(o++, val);
-		ee->ee_false_detect[mode] = (val >> 6) & 0x7f;
-
-		if (mode == AR5K_EEPROM_MODE_11A)
-			ee->ee_xr_power[mode] = val & 0x3f;
-		else {
-			ee->ee_ob[mode][0] = val & 0x7;
-			ee->ee_db[mode][0] = (val >> 3) & 0x7;
-		}
-	}
-
-	if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_4) {
-		ee->ee_i_gain[mode] = AR5K_EEPROM_I_GAIN;
-		ee->ee_cck_ofdm_power_delta = AR5K_EEPROM_CCK_OFDM_DELTA;
-	} else {
-		ee->ee_i_gain[mode] = (val >> 13) & 0x7;
-
-		AR5K_EEPROM_READ(o++, val);
-		ee->ee_i_gain[mode] |= (val << 3) & 0x38;
-
-		if (mode == AR5K_EEPROM_MODE_11G)
-			ee->ee_cck_ofdm_power_delta = (val >> 3) & 0xff;
-	}
-
-	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 &&
-			mode == AR5K_EEPROM_MODE_11A) {
-		ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
-		ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
-	}
-
-	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_6 &&
-	    mode == AR5K_EEPROM_MODE_11G)
-		ee->ee_scaled_cck_delta = (val >> 11) & 0x1f;
-
-	/* return new offset */
-	*offset = o;
-
-	return 0;
-}
-
-/*
- * Initialize eeprom & capabilities structs
- */
-static int ath5k_eeprom_init(struct ath5k_hw *ah)
-{
-	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-	unsigned int mode, i;
-	int ret;
-	u32 offset;
-	u16 val;
-
-	/* Initial TX thermal adjustment values */
-	ee->ee_tx_clip = 4;
-	ee->ee_pwd_84 = ee->ee_pwd_90 = 1;
-	ee->ee_gain_select = 1;
-
-	/*
-	 * Read values from EEPROM and store them in the capability structure
-	 */
-	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MAGIC, ee_magic);
-	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_PROTECT, ee_protect);
-	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_REG_DOMAIN, ee_regdomain);
-	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_VERSION, ee_version);
-	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_HDR, ee_header);
-
-	/* Return if we have an old EEPROM */
-	if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0)
-		return 0;
-
-#ifdef notyet
-	/*
-	 * Validate the checksum of the EEPROM date. There are some
-	 * devices with invalid EEPROMs.
-	 */
-	for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) {
-		AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val);
-		cksum ^= val;
-	}
-	if (cksum != AR5K_EEPROM_INFO_CKSUM) {
-		ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum);
-		return -EIO;
-	}
-#endif
-
-	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version),
-	    ee_ant_gain);
-
-	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
-		AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC0, ee_misc0);
-		AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC1, ee_misc1);
-	}
-
-	if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_3) {
-		AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val);
-		ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7;
-		ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7;
-
-		AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val);
-		ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7;
-		ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7;
-	}
-
-	/*
-	 * Get conformance test limit values
-	 */
-	offset = AR5K_EEPROM_CTL(ah->ah_ee_version);
-	ee->ee_ctls = AR5K_EEPROM_N_CTLS(ah->ah_ee_version);
-
-	for (i = 0; i < ee->ee_ctls; i++) {
-		AR5K_EEPROM_READ(offset++, val);
-		ee->ee_ctl[i] = (val >> 8) & 0xff;
-		ee->ee_ctl[i + 1] = val & 0xff;
-	}
-
-	/*
-	 * Get values for 802.11a (5GHz)
-	 */
-	mode = AR5K_EEPROM_MODE_11A;
-
-	ee->ee_turbo_max_power[mode] =
-			AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header);
-
-	offset = AR5K_EEPROM_MODES_11A(ah->ah_ee_version);
-
-	ret = ath5k_eeprom_read_ants(ah, &offset, mode);
-	if (ret)
-		return ret;
-
-	AR5K_EEPROM_READ(offset++, val);
-	ee->ee_adc_desired_size[mode]	= (s8)((val >> 8) & 0xff);
-	ee->ee_ob[mode][3]		= (val >> 5) & 0x7;
-	ee->ee_db[mode][3]		= (val >> 2) & 0x7;
-	ee->ee_ob[mode][2]		= (val << 1) & 0x7;
-
-	AR5K_EEPROM_READ(offset++, val);
-	ee->ee_ob[mode][2]		|= (val >> 15) & 0x1;
-	ee->ee_db[mode][2]		= (val >> 12) & 0x7;
-	ee->ee_ob[mode][1]		= (val >> 9) & 0x7;
-	ee->ee_db[mode][1]		= (val >> 6) & 0x7;
-	ee->ee_ob[mode][0]		= (val >> 3) & 0x7;
-	ee->ee_db[mode][0]		= val & 0x7;
-
-	ret = ath5k_eeprom_read_modes(ah, &offset, mode);
-	if (ret)
-		return ret;
-
-	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) {
-		AR5K_EEPROM_READ(offset++, val);
-		ee->ee_margin_tx_rx[mode] = val & 0x3f;
-	}
-
-	/*
-	 * Get values for 802.11b (2.4GHz)
-	 */
-	mode = AR5K_EEPROM_MODE_11B;
-	offset = AR5K_EEPROM_MODES_11B(ah->ah_ee_version);
-
-	ret = ath5k_eeprom_read_ants(ah, &offset, mode);
-	if (ret)
-		return ret;
-
-	AR5K_EEPROM_READ(offset++, val);
-	ee->ee_adc_desired_size[mode]	= (s8)((val >> 8) & 0xff);
-	ee->ee_ob[mode][1]		= (val >> 4) & 0x7;
-	ee->ee_db[mode][1]		= val & 0x7;
-
-	ret = ath5k_eeprom_read_modes(ah, &offset, mode);
-	if (ret)
-		return ret;
-
-	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
-		AR5K_EEPROM_READ(offset++, val);
-		ee->ee_cal_pier[mode][0] =
-			ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
-		ee->ee_cal_pier[mode][1] =
-			ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode);
-
-		AR5K_EEPROM_READ(offset++, val);
-		ee->ee_cal_pier[mode][2] =
-			ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
-	}
-
-	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
-		ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
-
-	/*
-	 * Get values for 802.11g (2.4GHz)
-	 */
-	mode = AR5K_EEPROM_MODE_11G;
-	offset = AR5K_EEPROM_MODES_11G(ah->ah_ee_version);
-
-	ret = ath5k_eeprom_read_ants(ah, &offset, mode);
-	if (ret)
-		return ret;
-
-	AR5K_EEPROM_READ(offset++, val);
-	ee->ee_adc_desired_size[mode]	= (s8)((val >> 8) & 0xff);
-	ee->ee_ob[mode][1]		= (val >> 4) & 0x7;
-	ee->ee_db[mode][1]		= val & 0x7;
-
-	ret = ath5k_eeprom_read_modes(ah, &offset, mode);
-	if (ret)
-		return ret;
-
-	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
-		AR5K_EEPROM_READ(offset++, val);
-		ee->ee_cal_pier[mode][0] =
-			ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
-		ee->ee_cal_pier[mode][1] =
-			ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode);
-
-		AR5K_EEPROM_READ(offset++, val);
-		ee->ee_turbo_max_power[mode] = val & 0x7f;
-		ee->ee_xr_power[mode] = (val >> 7) & 0x3f;
-
-		AR5K_EEPROM_READ(offset++, val);
-		ee->ee_cal_pier[mode][2] =
-			ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
-
-		if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
-			ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
-
-		AR5K_EEPROM_READ(offset++, val);
-		ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
-		ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
-
-		if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) {
-			AR5K_EEPROM_READ(offset++, val);
-			ee->ee_cck_ofdm_gain_delta = val & 0xff;
-		}
-	}
-
-	/*
-	 * Read 5GHz EEPROM channels
-	 */
-
-	return 0;
-}
-
-/*
- * Read the MAC address from eeprom
- */
-static int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
-{
-	u8 mac_d[ETH_ALEN];
-	u32 total, offset;
-	u16 data;
-	int octet, ret;
-
-	memset(mac, 0, ETH_ALEN);
-	memset(mac_d, 0, ETH_ALEN);
-
-	ret = ath5k_hw_eeprom_read(ah, 0x20, &data);
-	if (ret)
-		return ret;
-
-	for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) {
-		ret = ath5k_hw_eeprom_read(ah, offset, &data);
-		if (ret)
-			return ret;
-
-		total += data;
-		mac_d[octet + 1] = data & 0xff;
-		mac_d[octet] = data >> 8;
-		octet += 2;
-	}
-
-	memcpy(mac, mac_d, ETH_ALEN);
-
-	if (!total || total == 3 * 0xffff)
-		return -EINVAL;
-
-	return 0;
-}
-
-/*
- * Fill the capabilities struct
- */
-static int ath5k_hw_get_capabilities(struct ath5k_hw *ah)
-{
-	u16 ee_header;
-
-	ATH5K_TRACE(ah->ah_sc);
-	/* Capabilities stored in the EEPROM */
-	ee_header = ah->ah_capabilities.cap_eeprom.ee_header;
-
-	if (ah->ah_version == AR5K_AR5210) {
-		/*
-		 * Set radio capabilities
-		 * (The AR5110 only supports the middle 5GHz band)
-		 */
-		ah->ah_capabilities.cap_range.range_5ghz_min = 5120;
-		ah->ah_capabilities.cap_range.range_5ghz_max = 5430;
-		ah->ah_capabilities.cap_range.range_2ghz_min = 0;
-		ah->ah_capabilities.cap_range.range_2ghz_max = 0;
-
-		/* Set supported modes */
-		__set_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode);
-		__set_bit(AR5K_MODE_11A_TURBO, ah->ah_capabilities.cap_mode);
-	} else {
-		/*
-		 * XXX The tranceiver supports frequencies from 4920 to 6100GHz
-		 * XXX and from 2312 to 2732GHz. There are problems with the
-		 * XXX current ieee80211 implementation because the IEEE
-		 * XXX channel mapping does not support negative channel
-		 * XXX numbers (2312MHz is channel -19). Of course, this
-		 * XXX doesn't matter because these channels are out of range
-		 * XXX but some regulation domains like MKK (Japan) will
-		 * XXX support frequencies somewhere around 4.8GHz.
-		 */
-
-		/*
-		 * Set radio capabilities
-		 */
-
-		if (AR5K_EEPROM_HDR_11A(ee_header)) {
-			ah->ah_capabilities.cap_range.range_5ghz_min = 5005; /* 4920 */
-			ah->ah_capabilities.cap_range.range_5ghz_max = 6100;
-
-			/* Set supported modes */
-			__set_bit(AR5K_MODE_11A,
-					ah->ah_capabilities.cap_mode);
-			__set_bit(AR5K_MODE_11A_TURBO,
-					ah->ah_capabilities.cap_mode);
-			if (ah->ah_version == AR5K_AR5212)
-				__set_bit(AR5K_MODE_11G_TURBO,
-						ah->ah_capabilities.cap_mode);
-		}
-
-		/* Enable  802.11b if a 2GHz capable radio (2111/5112) is
-		 * connected */
-		if (AR5K_EEPROM_HDR_11B(ee_header) ||
-				AR5K_EEPROM_HDR_11G(ee_header)) {
-			ah->ah_capabilities.cap_range.range_2ghz_min = 2412; /* 2312 */
-			ah->ah_capabilities.cap_range.range_2ghz_max = 2732;
-
-			if (AR5K_EEPROM_HDR_11B(ee_header))
-				__set_bit(AR5K_MODE_11B,
-						ah->ah_capabilities.cap_mode);
-
-			if (AR5K_EEPROM_HDR_11G(ee_header))
-				__set_bit(AR5K_MODE_11G,
-						ah->ah_capabilities.cap_mode);
-		}
-	}
-
-	/* GPIO */
-	ah->ah_gpio_npins = AR5K_NUM_GPIO;
-
-	/* Set number of supported TX queues */
-	if (ah->ah_version == AR5K_AR5210)
-		ah->ah_capabilities.cap_queues.q_tx_num =
-			AR5K_NUM_TX_QUEUES_NOQCU;
-	else
-		ah->ah_capabilities.cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES;
-
-	return 0;
-}
-
-/*********************************\
-  Protocol Control Unit Functions
-\*********************************/
-
-/*
- * Set Operation mode
- */
-int ath5k_hw_set_opmode(struct ath5k_hw *ah)
-{
-	u32 pcu_reg, beacon_reg, low_id, high_id;
-
-	pcu_reg = 0;
-	beacon_reg = 0;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	switch (ah->ah_op_mode) {
-	case IEEE80211_IF_TYPE_IBSS:
-		pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_DESC_ANTENNA |
-			(ah->ah_version == AR5K_AR5210 ?
-				AR5K_STA_ID1_NO_PSPOLL : 0);
-		beacon_reg |= AR5K_BCR_ADHOC;
-		break;
-
-	case IEEE80211_IF_TYPE_AP:
-		pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_RTS_DEF_ANTENNA |
-			(ah->ah_version == AR5K_AR5210 ?
-				AR5K_STA_ID1_NO_PSPOLL : 0);
-		beacon_reg |= AR5K_BCR_AP;
-		break;
-
-	case IEEE80211_IF_TYPE_STA:
-		pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA |
-			(ah->ah_version == AR5K_AR5210 ?
-				AR5K_STA_ID1_PWR_SV : 0);
-	case IEEE80211_IF_TYPE_MNTR:
-		pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA |
-			(ah->ah_version == AR5K_AR5210 ?
-				AR5K_STA_ID1_NO_PSPOLL : 0);
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	/*
-	 * Set PCU registers
-	 */
-	low_id = AR5K_LOW_ID(ah->ah_sta_id);
-	high_id = AR5K_HIGH_ID(ah->ah_sta_id);
-	ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
-	ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1);
-
-	/*
-	 * Set Beacon Control Register on 5210
-	 */
-	if (ah->ah_version == AR5K_AR5210)
-		ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR);
-
-	return 0;
-}
-
-/*
- * BSSID Functions
- */
-
-/*
- * Get station id
- */
-void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	memcpy(mac, ah->ah_sta_id, ETH_ALEN);
-}
-
-/*
- * Set station id
- */
-int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac)
-{
-	u32 low_id, high_id;
-
-	ATH5K_TRACE(ah->ah_sc);
-	/* Set new station ID */
-	memcpy(ah->ah_sta_id, mac, ETH_ALEN);
-
-	low_id = AR5K_LOW_ID(mac);
-	high_id = AR5K_HIGH_ID(mac);
-
-	ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
-	ath5k_hw_reg_write(ah, high_id, AR5K_STA_ID1);
-
-	return 0;
-}
-
-/*
- * Set BSSID
- */
-void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id)
-{
-	u32 low_id, high_id;
-	u16 tim_offset = 0;
-
-	/*
-	 * Set simple BSSID mask on 5212
-	 */
-	if (ah->ah_version == AR5K_AR5212) {
-		ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM0);
-		ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM1);
-	}
-
-	/*
-	 * Set BSSID which triggers the "SME Join" operation
-	 */
-	low_id = AR5K_LOW_ID(bssid);
-	high_id = AR5K_HIGH_ID(bssid);
-	ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0);
-	ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) <<
-				AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1);
-
-	if (assoc_id == 0) {
-		ath5k_hw_disable_pspoll(ah);
-		return;
-	}
-
-	AR5K_REG_WRITE_BITS(ah, AR5K_BEACON, AR5K_BEACON_TIM,
-			tim_offset ? tim_offset + 4 : 0);
-
-	ath5k_hw_enable_pspoll(ah, NULL, 0);
-}
-/**
- * ath5k_hw_set_bssid_mask - set common bits we should listen to
- *
- * The bssid_mask is a utility used by AR5212 hardware to inform the hardware
- * which bits of the interface's MAC address should be looked at when trying
- * to decide which packets to ACK. In station mode every bit matters. In AP
- * mode with a single BSS every bit matters as well. In AP mode with
- * multiple BSSes not every bit matters.
- *
- * @ah: the &struct ath5k_hw
- * @mask: the bssid_mask, a u8 array of size ETH_ALEN
- *
- * Note that this is a simple filter and *does* not filter out all
- * relevant frames. Some non-relevant frames will get through, probability
- * jocks are welcomed to compute.
- *
- * When handling multiple BSSes (or VAPs) you can get the BSSID mask by
- * computing the set of:
- *
- *     ~ ( MAC XOR BSSID )
- *
- * When you do this you are essentially computing the common bits. Later it
- * is assumed the harware will "and" (&) the BSSID mask with the MAC address
- * to obtain the relevant bits which should match on the destination frame.
- *
- * Simple example: on your card you have have two BSSes you have created with
- * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address.
- * There is another BSSID-03 but you are not part of it. For simplicity's sake,
- * assuming only 4 bits for a mac address and for BSSIDs you can then have:
- *
- *                  \
- * MAC:                0001 |
- * BSSID-01:   0100 | --> Belongs to us
- * BSSID-02:   1001 |
- *                  /
- * -------------------
- * BSSID-03:   0110  | --> External
- * -------------------
- *
- * Our bssid_mask would then be:
- *
- *             On loop iteration for BSSID-01:
- *             ~(0001 ^ 0100)  -> ~(0101)
- *                             ->   1010
- *             bssid_mask      =    1010
- *
- *             On loop iteration for BSSID-02:
- *             bssid_mask &= ~(0001   ^   1001)
- *             bssid_mask =   (1010)  & ~(0001 ^ 1001)
- *             bssid_mask =   (1010)  & ~(1001)
- *             bssid_mask =   (1010)  &  (0110)
- *             bssid_mask =   0010
- *
- * A bssid_mask of 0010 means "only pay attention to the second least
- * significant bit". This is because its the only bit common
- * amongst the MAC and all BSSIDs we support. To findout what the real
- * common bit is we can simply "&" the bssid_mask now with any BSSID we have
- * or our MAC address (we assume the hardware uses the MAC address).
- *
- * Now, suppose there's an incoming frame for BSSID-03:
- *
- * IFRAME-01:  0110
- *
- * An easy eye-inspeciton of this already should tell you that this frame
- * will not pass our check. This is beacuse the bssid_mask tells the
- * hardware to only look at the second least significant bit and the
- * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB
- * as 1, which does not match 0.
- *
- * So with IFRAME-01 we *assume* the hardware will do:
- *
- *     allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
- *  --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0;
- *  --> allow = (0010) == 0000 ? 1 : 0;
- *  --> allow = 0
- *
- *  Lets now test a frame that should work:
- *
- * IFRAME-02:  0001 (we should allow)
- *
- *     allow = (0001 & 1010) == 1010
- *
- *     allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
- *  --> allow = (0001 & 0010) ==  (0010 & 0001) ? 1 :0;
- *  --> allow = (0010) == (0010)
- *  --> allow = 1
- *
- * Other examples:
- *
- * IFRAME-03:  0100 --> allowed
- * IFRAME-04:  1001 --> allowed
- * IFRAME-05:  1101 --> allowed but its not for us!!!
- *
- */
-int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
-{
-	u32 low_id, high_id;
-	ATH5K_TRACE(ah->ah_sc);
-
-	if (ah->ah_version == AR5K_AR5212) {
-		low_id = AR5K_LOW_ID(mask);
-		high_id = AR5K_HIGH_ID(mask);
-
-		ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0);
-		ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1);
-
-		return 0;
-	}
-
-	return -EIO;
-}
-
-/*
- * Receive start/stop functions
- */
-
-/*
- * Start receive on PCU
- */
-void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
-
-	/* TODO: ANI Support */
-}
-
-/*
- * Stop receive on PCU
- */
-void ath5k_hw_stop_pcu_recv(struct ath5k_hw *ah)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
-
-	/* TODO: ANI Support */
-}
-
-/*
- * RX Filter functions
- */
-
-/*
- * Set multicast filter
- */
-void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	/* Set the multicat filter */
-	ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0);
-	ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1);
-}
-
-/*
- * Set multicast filter by index
- */
-int ath5k_hw_set_mcast_filterindex(struct ath5k_hw *ah, u32 index)
-{
-
-	ATH5K_TRACE(ah->ah_sc);
-	if (index >= 64)
-		return -EINVAL;
-	else if (index >= 32)
-		AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER1,
-				(1 << (index - 32)));
-	else
-		AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index));
-
-	return 0;
-}
-
-/*
- * Clear Multicast filter by index
- */
-int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index)
-{
-
-	ATH5K_TRACE(ah->ah_sc);
-	if (index >= 64)
-		return -EINVAL;
-	else if (index >= 32)
-		AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER1,
-				(1 << (index - 32)));
-	else
-		AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index));
-
-	return 0;
-}
-
-/*
- * Get current rx filter
- */
-u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah)
-{
-	u32 data, filter = 0;
-
-	ATH5K_TRACE(ah->ah_sc);
-	filter = ath5k_hw_reg_read(ah, AR5K_RX_FILTER);
-
-	/*Radar detection for 5212*/
-	if (ah->ah_version == AR5K_AR5212) {
-		data = ath5k_hw_reg_read(ah, AR5K_PHY_ERR_FIL);
-
-		if (data & AR5K_PHY_ERR_FIL_RADAR)
-			filter |= AR5K_RX_FILTER_RADARERR;
-		if (data & (AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK))
-			filter |= AR5K_RX_FILTER_PHYERR;
-	}
-
-	return filter;
-}
-
-/*
- * Set rx filter
- */
-void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter)
-{
-	u32 data = 0;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	/* Set PHY error filter register on 5212*/
-	if (ah->ah_version == AR5K_AR5212) {
-		if (filter & AR5K_RX_FILTER_RADARERR)
-			data |= AR5K_PHY_ERR_FIL_RADAR;
-		if (filter & AR5K_RX_FILTER_PHYERR)
-			data |= AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK;
-	}
-
-	/*
-	 * The AR5210 uses promiscous mode to detect radar activity
-	 */
-	if (ah->ah_version == AR5K_AR5210 &&
-			(filter & AR5K_RX_FILTER_RADARERR)) {
-		filter &= ~AR5K_RX_FILTER_RADARERR;
-		filter |= AR5K_RX_FILTER_PROM;
-	}
-
-	/*Zero length DMA*/
-	if (data)
-		AR5K_REG_ENABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA);
-	else
-		AR5K_REG_DISABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA);
-
-	/*Write RX Filter register*/
-	ath5k_hw_reg_write(ah, filter & 0xff, AR5K_RX_FILTER);
-
-	/*Write PHY error filter register on 5212*/
-	if (ah->ah_version == AR5K_AR5212)
-		ath5k_hw_reg_write(ah, data, AR5K_PHY_ERR_FIL);
-
-}
-
-/*
- * Beacon related functions
- */
-
-/*
- * Get a 32bit TSF
- */
-u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	return ath5k_hw_reg_read(ah, AR5K_TSF_L32);
-}
-
-/*
- * Get the full 64bit TSF
- */
-u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah)
-{
-	u64 tsf = ath5k_hw_reg_read(ah, AR5K_TSF_U32);
-	ATH5K_TRACE(ah->ah_sc);
-
-	return ath5k_hw_reg_read(ah, AR5K_TSF_L32) | (tsf << 32);
-}
-
-/*
- * Force a TSF reset
- */
-void ath5k_hw_reset_tsf(struct ath5k_hw *ah)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	AR5K_REG_ENABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_RESET_TSF);
-}
-
-/*
- * Initialize beacon timers
- */
-void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval)
-{
-	u32 timer1, timer2, timer3;
-
-	ATH5K_TRACE(ah->ah_sc);
-	/*
-	 * Set the additional timers by mode
-	 */
-	switch (ah->ah_op_mode) {
-	case IEEE80211_IF_TYPE_STA:
-		if (ah->ah_version == AR5K_AR5210) {
-			timer1 = 0xffffffff;
-			timer2 = 0xffffffff;
-		} else {
-			timer1 = 0x0000ffff;
-			timer2 = 0x0007ffff;
-		}
-		break;
-
-	default:
-		timer1 = (next_beacon - AR5K_TUNE_DMA_BEACON_RESP) << 3;
-		timer2 = (next_beacon - AR5K_TUNE_SW_BEACON_RESP) << 3;
-	}
-
-	timer3 = next_beacon + (ah->ah_atim_window ? ah->ah_atim_window : 1);
-
-	/*
-	 * Set the beacon register and enable all timers.
-	 * (next beacon, DMA beacon, software beacon, ATIM window time)
-	 */
-	ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0);
-	ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1);
-	ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2);
-	ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3);
-
-	ath5k_hw_reg_write(ah, interval & (AR5K_BEACON_PERIOD |
-			AR5K_BEACON_RESET_TSF | AR5K_BEACON_ENABLE),
-		AR5K_BEACON);
-}
-
-#if 0
-/*
- * Set beacon timers
- */
-int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah,
-		const struct ath5k_beacon_state *state)
-{
-	u32 cfp_period, next_cfp, dtim, interval, next_beacon;
-
-	/*
-	 * TODO: should be changed through *state
-	 * review struct ath5k_beacon_state struct
-	 *
-	 * XXX: These are used for cfp period bellow, are they
-	 * ok ? Is it O.K. for tsf here to be 0 or should we use
-	 * get_tsf ?
-	 */
-	u32 dtim_count = 0; /* XXX */
-	u32 cfp_count = 0; /* XXX */
-	u32 tsf = 0; /* XXX */
-
-	ATH5K_TRACE(ah->ah_sc);
-	/* Return on an invalid beacon state */
-	if (state->bs_interval < 1)
-		return -EINVAL;
-
-	interval = state->bs_interval;
-	dtim = state->bs_dtim_period;
-
-	/*
-	 * PCF support?
-	 */
-	if (state->bs_cfp_period > 0) {
-		/*
-		 * Enable PCF mode and set the CFP
-		 * (Contention Free Period) and timer registers
-		 */
-		cfp_period = state->bs_cfp_period * state->bs_dtim_period *
-			state->bs_interval;
-		next_cfp = (cfp_count * state->bs_dtim_period + dtim_count) *
-			state->bs_interval;
-
-		AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1,
-				AR5K_STA_ID1_DEFAULT_ANTENNA |
-				AR5K_STA_ID1_PCF);
-		ath5k_hw_reg_write(ah, cfp_period, AR5K_CFP_PERIOD);
-		ath5k_hw_reg_write(ah, state->bs_cfp_max_duration,
-				AR5K_CFP_DUR);
-		ath5k_hw_reg_write(ah, (tsf + (next_cfp == 0 ? cfp_period :
-						next_cfp)) << 3, AR5K_TIMER2);
-	} else {
-		/* Disable PCF mode */
-		AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
-				AR5K_STA_ID1_DEFAULT_ANTENNA |
-				AR5K_STA_ID1_PCF);
-	}
-
-	/*
-	 * Enable the beacon timer register
-	 */
-	ath5k_hw_reg_write(ah, state->bs_next_beacon, AR5K_TIMER0);
-
-	/*
-	 * Start the beacon timers
-	 */
-	ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_BEACON) &~
-		(AR5K_BEACON_PERIOD | AR5K_BEACON_TIM)) |
-		AR5K_REG_SM(state->bs_tim_offset ? state->bs_tim_offset + 4 : 0,
-		AR5K_BEACON_TIM) | AR5K_REG_SM(state->bs_interval,
-		AR5K_BEACON_PERIOD), AR5K_BEACON);
-
-	/*
-	 * Write new beacon miss threshold, if it appears to be valid
-	 * XXX: Figure out right values for min <= bs_bmiss_threshold <= max
-	 * and return if its not in range. We can test this by reading value and
-	 * setting value to a largest value and seeing which values register.
-	 */
-
-	AR5K_REG_WRITE_BITS(ah, AR5K_RSSI_THR, AR5K_RSSI_THR_BMISS,
-			state->bs_bmiss_threshold);
-
-	/*
-	 * Set sleep control register
-	 * XXX: Didn't find this in 5210 code but since this register
-	 * exists also in ar5k's 5210 headers i leave it as common code.
-	 */
-	AR5K_REG_WRITE_BITS(ah, AR5K_SLEEP_CTL, AR5K_SLEEP_CTL_SLDUR,
-			(state->bs_sleep_duration - 3) << 3);
-
-	/*
-	 * Set enhanced sleep registers on 5212
-	 */
-	if (ah->ah_version == AR5K_AR5212) {
-		if (state->bs_sleep_duration > state->bs_interval &&
-				roundup(state->bs_sleep_duration, interval) ==
-				state->bs_sleep_duration)
-			interval = state->bs_sleep_duration;
-
-		if (state->bs_sleep_duration > dtim && (dtim == 0 ||
-				roundup(state->bs_sleep_duration, dtim) ==
-				state->bs_sleep_duration))
-			dtim = state->bs_sleep_duration;
-
-		if (interval > dtim)
-			return -EINVAL;
-
-		next_beacon = interval == dtim ? state->bs_next_dtim :
-			state->bs_next_beacon;
-
-		ath5k_hw_reg_write(ah,
-			AR5K_REG_SM((state->bs_next_dtim - 3) << 3,
-			AR5K_SLEEP0_NEXT_DTIM) |
-			AR5K_REG_SM(10, AR5K_SLEEP0_CABTO) |
-			AR5K_SLEEP0_ENH_SLEEP_EN |
-			AR5K_SLEEP0_ASSUME_DTIM, AR5K_SLEEP0);
-
-		ath5k_hw_reg_write(ah, AR5K_REG_SM((next_beacon - 3) << 3,
-			AR5K_SLEEP1_NEXT_TIM) |
-			AR5K_REG_SM(10, AR5K_SLEEP1_BEACON_TO), AR5K_SLEEP1);
-
-		ath5k_hw_reg_write(ah,
-			AR5K_REG_SM(interval, AR5K_SLEEP2_TIM_PER) |
-			AR5K_REG_SM(dtim, AR5K_SLEEP2_DTIM_PER), AR5K_SLEEP2);
-	}
-
-	return 0;
-}
-
-/*
- * Reset beacon timers
- */
-void ath5k_hw_reset_beacon(struct ath5k_hw *ah)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	/*
-	 * Disable beacon timer
-	 */
-	ath5k_hw_reg_write(ah, 0, AR5K_TIMER0);
-
-	/*
-	 * Disable some beacon register values
-	 */
-	AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
-			AR5K_STA_ID1_DEFAULT_ANTENNA | AR5K_STA_ID1_PCF);
-	ath5k_hw_reg_write(ah, AR5K_BEACON_PERIOD, AR5K_BEACON);
-}
-
-/*
- * Wait for beacon queue to finish
- */
-int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr)
-{
-	unsigned int i;
-	int ret;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	/* 5210 doesn't have QCU*/
-	if (ah->ah_version == AR5K_AR5210) {
-		/*
-		 * Wait for beaconn queue to finish by checking
-		 * Control Register and Beacon Status Register.
-		 */
-		for (i = AR5K_TUNE_BEACON_INTERVAL / 2; i > 0; i--) {
-			if (!(ath5k_hw_reg_read(ah, AR5K_BSR) & AR5K_BSR_TXQ1F)
-					||
-			    !(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_BSR_TXQ1F))
-				break;
-			udelay(10);
-		}
-
-		/* Timeout... */
-		if (i <= 0) {
-			/*
-			 * Re-schedule the beacon queue
-			 */
-			ath5k_hw_reg_write(ah, phys_addr, AR5K_NOQCU_TXDP1);
-			ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE,
-					AR5K_BCR);
-
-			return -EIO;
-		}
-		ret = 0;
-	} else {
-	/*5211/5212*/
-		ret = ath5k_hw_register_timeout(ah,
-			AR5K_QUEUE_STATUS(AR5K_TX_QUEUE_ID_BEACON),
-			AR5K_QCU_STS_FRMPENDCNT, 0, false);
-
-		if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, AR5K_TX_QUEUE_ID_BEACON))
-			return -EIO;
-	}
-
-	return ret;
-}
-#endif
-
-/*
- * Update mib counters (statistics)
- */
-void ath5k_hw_update_mib_counters(struct ath5k_hw *ah,
-		struct ieee80211_low_level_stats  *stats)
-{
-	ATH5K_TRACE(ah->ah_sc);
-
-	/* Read-And-Clear */
-	stats->dot11ACKFailureCount += ath5k_hw_reg_read(ah, AR5K_ACK_FAIL);
-	stats->dot11RTSFailureCount += ath5k_hw_reg_read(ah, AR5K_RTS_FAIL);
-	stats->dot11RTSSuccessCount += ath5k_hw_reg_read(ah, AR5K_RTS_OK);
-	stats->dot11FCSErrorCount += ath5k_hw_reg_read(ah, AR5K_FCS_FAIL);
-
-	/* XXX: Should we use this to track beacon count ?
-	 * -we read it anyway to clear the register */
-	ath5k_hw_reg_read(ah, AR5K_BEACON_CNT);
-
-	/* Reset profile count registers on 5212*/
-	if (ah->ah_version == AR5K_AR5212) {
-		ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_TX);
-		ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RX);
-		ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RXCLR);
-		ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_CYCLE);
-	}
-}
-
-/** ath5k_hw_set_ack_bitrate - set bitrate for ACKs
- *
- * @ah: the &struct ath5k_hw
- * @high: determines if to use low bit rate or now
- */
-void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high)
-{
-	if (ah->ah_version != AR5K_AR5212)
-		return;
-	else {
-		u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB;
-		if (high)
-			AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val);
-		else
-			AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val);
-	}
-}
-
-
-/*
- * ACK/CTS Timeouts
- */
-
-/*
- * Set ACK timeout on PCU
- */
-int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK),
-			ah->ah_turbo) <= timeout)
-		return -EINVAL;
-
-	AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_ACK,
-		ath5k_hw_htoclock(timeout, ah->ah_turbo));
-
-	return 0;
-}
-
-/*
- * Read the ACK timeout from PCU
- */
-unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah)
-{
-	ATH5K_TRACE(ah->ah_sc);
-
-	return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah,
-			AR5K_TIME_OUT), AR5K_TIME_OUT_ACK), ah->ah_turbo);
-}
-
-/*
- * Set CTS timeout on PCU
- */
-int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS),
-			ah->ah_turbo) <= timeout)
-		return -EINVAL;
-
-	AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_CTS,
-			ath5k_hw_htoclock(timeout, ah->ah_turbo));
-
-	return 0;
-}
-
-/*
- * Read CTS timeout from PCU
- */
-unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah,
-			AR5K_TIME_OUT), AR5K_TIME_OUT_CTS), ah->ah_turbo);
-}
-
-/*
- * Key table (WEP) functions
- */
-
-int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry)
-{
-	unsigned int i;
-
-	ATH5K_TRACE(ah->ah_sc);
-	AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
-
-	for (i = 0; i < AR5K_KEYCACHE_SIZE; i++)
-		ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(entry, i));
-
-	/*
-	 * Set NULL encryption on AR5212+
-	 *
-	 * Note: AR5K_KEYTABLE_TYPE -> AR5K_KEYTABLE_OFF(entry, 5)
-	 *       AR5K_KEYTABLE_TYPE_NULL -> 0x00000007
-	 *
-	 * Note2: Windows driver (ndiswrapper) sets this to
-	 *        0x00000714 instead of 0x00000007
-	 */
-	if (ah->ah_version > AR5K_AR5211)
-		ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL,
-				AR5K_KEYTABLE_TYPE(entry));
-
-	return 0;
-}
-
-int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
-
-	/* Check the validation flag at the end of the entry */
-	return ath5k_hw_reg_read(ah, AR5K_KEYTABLE_MAC1(entry)) &
-		AR5K_KEYTABLE_VALID;
-}
-
-int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry,
-		const struct ieee80211_key_conf *key, const u8 *mac)
-{
-	unsigned int i;
-	__le32 key_v[5] = {};
-	u32 keytype;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	/* key->keylen comes in from mac80211 in bytes */
-
-	if (key->keylen > AR5K_KEYTABLE_SIZE / 8)
-		return -EOPNOTSUPP;
-
-	switch (key->keylen) {
-	/* WEP 40-bit   = 40-bit  entered key + 24 bit IV = 64-bit */
-	case 40 / 8:
-		memcpy(&key_v[0], key->key, 5);
-		keytype = AR5K_KEYTABLE_TYPE_40;
-		break;
-
-	/* WEP 104-bit  = 104-bit entered key + 24-bit IV = 128-bit */
-	case 104 / 8:
-		memcpy(&key_v[0], &key->key[0], 6);
-		memcpy(&key_v[2], &key->key[6], 6);
-		memcpy(&key_v[4], &key->key[12], 1);
-		keytype = AR5K_KEYTABLE_TYPE_104;
-		break;
-	/* WEP 128-bit  = 128-bit entered key + 24 bit IV = 152-bit */
-	case 128 / 8:
-		memcpy(&key_v[0], &key->key[0], 6);
-		memcpy(&key_v[2], &key->key[6], 6);
-		memcpy(&key_v[4], &key->key[12], 4);
-		keytype = AR5K_KEYTABLE_TYPE_128;
-		break;
-
-	default:
-		return -EINVAL; /* shouldn't happen */
-	}
-
-	for (i = 0; i < ARRAY_SIZE(key_v); i++)
-		ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]),
-				AR5K_KEYTABLE_OFF(entry, i));
-
-	ath5k_hw_reg_write(ah, keytype, AR5K_KEYTABLE_TYPE(entry));
-
-	return ath5k_hw_set_key_lladdr(ah, entry, mac);
-}
-
-int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac)
-{
-	u32 low_id, high_id;
-
-	ATH5K_TRACE(ah->ah_sc);
-	 /* Invalid entry (key table overflow) */
-	AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
-
-	/* MAC may be NULL if it's a broadcast key. In this case no need to
-	 * to compute AR5K_LOW_ID and AR5K_HIGH_ID as we already know it. */
-	if (unlikely(mac == NULL)) {
-		low_id = 0xffffffff;
-		high_id = 0xffff | AR5K_KEYTABLE_VALID;
-	} else {
-		low_id = AR5K_LOW_ID(mac);
-		high_id = AR5K_HIGH_ID(mac) | AR5K_KEYTABLE_VALID;
-	}
-
-	ath5k_hw_reg_write(ah, low_id, AR5K_KEYTABLE_MAC0(entry));
-	ath5k_hw_reg_write(ah, high_id, AR5K_KEYTABLE_MAC1(entry));
-
-	return 0;
-}
-
-
-/********************************************\
-Queue Control Unit, DFS Control Unit Functions
-\********************************************/
-
-/*
- * Initialize a transmit queue
- */
-int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type,
-		struct ath5k_txq_info *queue_info)
-{
-	unsigned int queue;
-	int ret;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	/*
-	 * Get queue by type
-	 */
-	/*5210 only has 2 queues*/
-	if (ah->ah_version == AR5K_AR5210) {
-		switch (queue_type) {
-		case AR5K_TX_QUEUE_DATA:
-			queue = AR5K_TX_QUEUE_ID_NOQCU_DATA;
-			break;
-		case AR5K_TX_QUEUE_BEACON:
-		case AR5K_TX_QUEUE_CAB:
-			queue = AR5K_TX_QUEUE_ID_NOQCU_BEACON;
-			break;
-		default:
-			return -EINVAL;
-		}
-	} else {
-		switch (queue_type) {
-		case AR5K_TX_QUEUE_DATA:
-			for (queue = AR5K_TX_QUEUE_ID_DATA_MIN;
-				ah->ah_txq[queue].tqi_type !=
-				AR5K_TX_QUEUE_INACTIVE; queue++) {
-
-				if (queue > AR5K_TX_QUEUE_ID_DATA_MAX)
-					return -EINVAL;
-			}
-			break;
-		case AR5K_TX_QUEUE_UAPSD:
-			queue = AR5K_TX_QUEUE_ID_UAPSD;
-			break;
-		case AR5K_TX_QUEUE_BEACON:
-			queue = AR5K_TX_QUEUE_ID_BEACON;
-			break;
-		case AR5K_TX_QUEUE_CAB:
-			queue = AR5K_TX_QUEUE_ID_CAB;
-			break;
-		case AR5K_TX_QUEUE_XR_DATA:
-			if (ah->ah_version != AR5K_AR5212)
-				ATH5K_ERR(ah->ah_sc,
-					"XR data queues only supported in"
-					" 5212!\n");
-			queue = AR5K_TX_QUEUE_ID_XR_DATA;
-			break;
-		default:
-			return -EINVAL;
-		}
-	}
-
-	/*
-	 * Setup internal queue structure
-	 */
-	memset(&ah->ah_txq[queue], 0, sizeof(struct ath5k_txq_info));
-	ah->ah_txq[queue].tqi_type = queue_type;
-
-	if (queue_info != NULL) {
-		queue_info->tqi_type = queue_type;
-		ret = ath5k_hw_setup_tx_queueprops(ah, queue, queue_info);
-		if (ret)
-			return ret;
-	}
-	/*
-	 * We use ah_txq_status to hold a temp value for
-	 * the Secondary interrupt mask registers on 5211+
-	 * check out ath5k_hw_reset_tx_queue
-	 */
-	AR5K_Q_ENABLE_BITS(ah->ah_txq_status, queue);
-
-	return queue;
-}
-
-/*
- * Setup a transmit queue
- */
-int ath5k_hw_setup_tx_queueprops(struct ath5k_hw *ah, int queue,
-				const struct ath5k_txq_info *queue_info)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
-
-	if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
-		return -EIO;
-
-	memcpy(&ah->ah_txq[queue], queue_info, sizeof(struct ath5k_txq_info));
-
-	/*XXX: Is this supported on 5210 ?*/
-	if ((queue_info->tqi_type == AR5K_TX_QUEUE_DATA &&
-			((queue_info->tqi_subtype == AR5K_WME_AC_VI) ||
-			(queue_info->tqi_subtype == AR5K_WME_AC_VO))) ||
-			queue_info->tqi_type == AR5K_TX_QUEUE_UAPSD)
-		ah->ah_txq[queue].tqi_flags |= AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS;
-
-	return 0;
-}
-
-/*
- * Get properties for a specific transmit queue
- */
-int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue,
-		struct ath5k_txq_info *queue_info)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info));
-	return 0;
-}
-
-/*
- * Set a transmit queue inactive
- */
-void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num))
-		return;
-
-	/* This queue will be skipped in further operations */
-	ah->ah_txq[queue].tqi_type = AR5K_TX_QUEUE_INACTIVE;
-	/*For SIMR setup*/
-	AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue);
-}
-
-/*
- * Set DFS params for a transmit queue
- */
-int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
-{
-	u32 cw_min, cw_max, retry_lg, retry_sh;
-	struct ath5k_txq_info *tq = &ah->ah_txq[queue];
-
-	ATH5K_TRACE(ah->ah_sc);
-	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
-
-	tq = &ah->ah_txq[queue];
-
-	if (tq->tqi_type == AR5K_TX_QUEUE_INACTIVE)
-		return 0;
-
-	if (ah->ah_version == AR5K_AR5210) {
-		/* Only handle data queues, others will be ignored */
-		if (tq->tqi_type != AR5K_TX_QUEUE_DATA)
-			return 0;
-
-		/* Set Slot time */
-		ath5k_hw_reg_write(ah, ah->ah_turbo ?
-			AR5K_INIT_SLOT_TIME_TURBO : AR5K_INIT_SLOT_TIME,
-			AR5K_SLOT_TIME);
-		/* Set ACK_CTS timeout */
-		ath5k_hw_reg_write(ah, ah->ah_turbo ?
-			AR5K_INIT_ACK_CTS_TIMEOUT_TURBO :
-			AR5K_INIT_ACK_CTS_TIMEOUT, AR5K_SLOT_TIME);
-		/* Set Transmit Latency */
-		ath5k_hw_reg_write(ah, ah->ah_turbo ?
-			AR5K_INIT_TRANSMIT_LATENCY_TURBO :
-			AR5K_INIT_TRANSMIT_LATENCY, AR5K_USEC_5210);
-		/* Set IFS0 */
-		if (ah->ah_turbo)
-			 ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS_TURBO +
-				(ah->ah_aifs + tq->tqi_aifs) *
-				AR5K_INIT_SLOT_TIME_TURBO) <<
-				AR5K_IFS0_DIFS_S) | AR5K_INIT_SIFS_TURBO,
-				AR5K_IFS0);
-		else
-			ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS +
-				(ah->ah_aifs + tq->tqi_aifs) *
-				AR5K_INIT_SLOT_TIME) << AR5K_IFS0_DIFS_S) |
-				AR5K_INIT_SIFS, AR5K_IFS0);
-
-		/* Set IFS1 */
-		ath5k_hw_reg_write(ah, ah->ah_turbo ?
-			AR5K_INIT_PROTO_TIME_CNTRL_TURBO :
-			AR5K_INIT_PROTO_TIME_CNTRL, AR5K_IFS1);
-		/* Set AR5K_PHY_SETTLING */
-		ath5k_hw_reg_write(ah, ah->ah_turbo ?
-			(ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F)
-			| 0x38 :
-			(ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F)
-			| 0x1C,
-			AR5K_PHY_SETTLING);
-		/* Set Frame Control Register */
-		ath5k_hw_reg_write(ah, ah->ah_turbo ?
-			(AR5K_PHY_FRAME_CTL_INI | AR5K_PHY_TURBO_MODE |
-			AR5K_PHY_TURBO_SHORT | 0x2020) :
-			(AR5K_PHY_FRAME_CTL_INI | 0x1020),
-			AR5K_PHY_FRAME_CTL_5210);
-	}
-
-	/*
-	 * Calculate cwmin/max by channel mode
-	 */
-	cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN;
-	cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX;
-	ah->ah_aifs = AR5K_TUNE_AIFS;
-	/*XR is only supported on 5212*/
-	if (IS_CHAN_XR(ah->ah_current_channel) &&
-			ah->ah_version == AR5K_AR5212) {
-		cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_XR;
-		cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_XR;
-		ah->ah_aifs = AR5K_TUNE_AIFS_XR;
-	/*B mode is not supported on 5210*/
-	} else if (IS_CHAN_B(ah->ah_current_channel) &&
-			ah->ah_version != AR5K_AR5210) {
-		cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_11B;
-		cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_11B;
-		ah->ah_aifs = AR5K_TUNE_AIFS_11B;
-	}
-
-	cw_min = 1;
-	while (cw_min < ah->ah_cw_min)
-		cw_min = (cw_min << 1) | 1;
-
-	cw_min = tq->tqi_cw_min < 0 ? (cw_min >> (-tq->tqi_cw_min)) :
-		((cw_min << tq->tqi_cw_min) + (1 << tq->tqi_cw_min) - 1);
-	cw_max = tq->tqi_cw_max < 0 ? (cw_max >> (-tq->tqi_cw_max)) :
-		((cw_max << tq->tqi_cw_max) + (1 << tq->tqi_cw_max) - 1);
-
-	/*
-	 * Calculate and set retry limits
-	 */
-	if (ah->ah_software_retry) {
-		/* XXX Need to test this */
-		retry_lg = ah->ah_limit_tx_retries;
-		retry_sh = retry_lg = retry_lg > AR5K_DCU_RETRY_LMT_SH_RETRY ?
-			AR5K_DCU_RETRY_LMT_SH_RETRY : retry_lg;
-	} else {
-		retry_lg = AR5K_INIT_LG_RETRY;
-		retry_sh = AR5K_INIT_SH_RETRY;
-	}
-
-	/*No QCU/DCU [5210]*/
-	if (ah->ah_version == AR5K_AR5210) {
-		ath5k_hw_reg_write(ah,
-			(cw_min << AR5K_NODCU_RETRY_LMT_CW_MIN_S)
-			| AR5K_REG_SM(AR5K_INIT_SLG_RETRY,
-				AR5K_NODCU_RETRY_LMT_SLG_RETRY)
-			| AR5K_REG_SM(AR5K_INIT_SSH_RETRY,
-				AR5K_NODCU_RETRY_LMT_SSH_RETRY)
-			| AR5K_REG_SM(retry_lg, AR5K_NODCU_RETRY_LMT_LG_RETRY)
-			| AR5K_REG_SM(retry_sh, AR5K_NODCU_RETRY_LMT_SH_RETRY),
-			AR5K_NODCU_RETRY_LMT);
-	} else {
-		/*QCU/DCU [5211+]*/
-		ath5k_hw_reg_write(ah,
-			AR5K_REG_SM(AR5K_INIT_SLG_RETRY,
-				AR5K_DCU_RETRY_LMT_SLG_RETRY) |
-			AR5K_REG_SM(AR5K_INIT_SSH_RETRY,
-				AR5K_DCU_RETRY_LMT_SSH_RETRY) |
-			AR5K_REG_SM(retry_lg, AR5K_DCU_RETRY_LMT_LG_RETRY) |
-			AR5K_REG_SM(retry_sh, AR5K_DCU_RETRY_LMT_SH_RETRY),
-			AR5K_QUEUE_DFS_RETRY_LIMIT(queue));
-
-	/*===Rest is also for QCU/DCU only [5211+]===*/
-
-		/*
-		 * Set initial content window (cw_min/cw_max)
-		 * and arbitrated interframe space (aifs)...
-		 */
-		ath5k_hw_reg_write(ah,
-			AR5K_REG_SM(cw_min, AR5K_DCU_LCL_IFS_CW_MIN) |
-			AR5K_REG_SM(cw_max, AR5K_DCU_LCL_IFS_CW_MAX) |
-			AR5K_REG_SM(ah->ah_aifs + tq->tqi_aifs,
-				AR5K_DCU_LCL_IFS_AIFS),
-			AR5K_QUEUE_DFS_LOCAL_IFS(queue));
-
-		/*
-		 * Set misc registers
-		 */
-		ath5k_hw_reg_write(ah, AR5K_QCU_MISC_DCU_EARLY,
-			AR5K_QUEUE_MISC(queue));
-
-		if (tq->tqi_cbr_period) {
-			ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_cbr_period,
-				AR5K_QCU_CBRCFG_INTVAL) |
-				AR5K_REG_SM(tq->tqi_cbr_overflow_limit,
-				AR5K_QCU_CBRCFG_ORN_THRES),
-				AR5K_QUEUE_CBRCFG(queue));
-			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
-				AR5K_QCU_MISC_FRSHED_CBR);
-			if (tq->tqi_cbr_overflow_limit)
-				AR5K_REG_ENABLE_BITS(ah,
-					AR5K_QUEUE_MISC(queue),
-					AR5K_QCU_MISC_CBR_THRES_ENABLE);
-		}
-
-		if (tq->tqi_ready_time)
-			ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time,
-				AR5K_QCU_RDYTIMECFG_INTVAL) |
-				AR5K_QCU_RDYTIMECFG_ENABLE,
-				AR5K_QUEUE_RDYTIMECFG(queue));
-
-		if (tq->tqi_burst_time) {
-			ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_burst_time,
-				AR5K_DCU_CHAN_TIME_DUR) |
-				AR5K_DCU_CHAN_TIME_ENABLE,
-				AR5K_QUEUE_DFS_CHANNEL_TIME(queue));
-
-			if (tq->tqi_flags & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE)
-				AR5K_REG_ENABLE_BITS(ah,
-					AR5K_QUEUE_MISC(queue),
-					AR5K_QCU_MISC_RDY_VEOL_POLICY);
-		}
-
-		if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE)
-			ath5k_hw_reg_write(ah, AR5K_DCU_MISC_POST_FR_BKOFF_DIS,
-				AR5K_QUEUE_DFS_MISC(queue));
-
-		if (tq->tqi_flags & AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE)
-			ath5k_hw_reg_write(ah, AR5K_DCU_MISC_BACKOFF_FRAG,
-				AR5K_QUEUE_DFS_MISC(queue));
-
-		/*
-		 * Set registers by queue type
-		 */
-		switch (tq->tqi_type) {
-		case AR5K_TX_QUEUE_BEACON:
-			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
-				AR5K_QCU_MISC_FRSHED_DBA_GT |
-				AR5K_QCU_MISC_CBREXP_BCN |
-				AR5K_QCU_MISC_BCN_ENABLE);
-
-			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
-				(AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
-				AR5K_DCU_MISC_ARBLOCK_CTL_S) |
-				AR5K_DCU_MISC_POST_FR_BKOFF_DIS |
-				AR5K_DCU_MISC_BCN_ENABLE);
-
-			ath5k_hw_reg_write(ah, ((AR5K_TUNE_BEACON_INTERVAL -
-				(AR5K_TUNE_SW_BEACON_RESP -
-				AR5K_TUNE_DMA_BEACON_RESP) -
-				AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF) * 1024) |
-				AR5K_QCU_RDYTIMECFG_ENABLE,
-				AR5K_QUEUE_RDYTIMECFG(queue));
-			break;
-
-		case AR5K_TX_QUEUE_CAB:
-			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
-				AR5K_QCU_MISC_FRSHED_DBA_GT |
-				AR5K_QCU_MISC_CBREXP |
-				AR5K_QCU_MISC_CBREXP_BCN);
-
-			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
-				(AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
-				AR5K_DCU_MISC_ARBLOCK_CTL_S));
-			break;
-
-		case AR5K_TX_QUEUE_UAPSD:
-			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
-				AR5K_QCU_MISC_CBREXP);
-			break;
-
-		case AR5K_TX_QUEUE_DATA:
-		default:
-			break;
-		}
-
-		/*
-		 * Enable interrupts for this tx queue
-		 * in the secondary interrupt mask registers
-		 */
-		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXOKINT_ENABLE)
-			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txok, queue);
-
-		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXERRINT_ENABLE)
-			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txerr, queue);
-
-		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXURNINT_ENABLE)
-			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txurn, queue);
-
-		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXDESCINT_ENABLE)
-			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txdesc, queue);
-
-		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXEOLINT_ENABLE)
-			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txeol, queue);
-
-
-		/* Update secondary interrupt mask registers */
-		ah->ah_txq_imr_txok &= ah->ah_txq_status;
-		ah->ah_txq_imr_txerr &= ah->ah_txq_status;
-		ah->ah_txq_imr_txurn &= ah->ah_txq_status;
-		ah->ah_txq_imr_txdesc &= ah->ah_txq_status;
-		ah->ah_txq_imr_txeol &= ah->ah_txq_status;
-
-		ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txok,
-			AR5K_SIMR0_QCU_TXOK) |
-			AR5K_REG_SM(ah->ah_txq_imr_txdesc,
-			AR5K_SIMR0_QCU_TXDESC), AR5K_SIMR0);
-		ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txerr,
-			AR5K_SIMR1_QCU_TXERR) |
-			AR5K_REG_SM(ah->ah_txq_imr_txeol,
-			AR5K_SIMR1_QCU_TXEOL), AR5K_SIMR1);
-		ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txurn,
-			AR5K_SIMR2_QCU_TXURN), AR5K_SIMR2);
-	}
-
-	return 0;
-}
-
-/*
- * Get number of pending frames
- * for a specific queue [5211+]
- */
-u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue) {
-	ATH5K_TRACE(ah->ah_sc);
-	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
-
-	/* Return if queue is declared inactive */
-	if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
-		return false;
-
-	/* XXX: How about AR5K_CFG_TXCNT ? */
-	if (ah->ah_version == AR5K_AR5210)
-		return false;
-
-	return AR5K_QUEUE_STATUS(queue) & AR5K_QCU_STS_FRMPENDCNT;
-}
-
-/*
- * Set slot time
- */
-int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	if (slot_time < AR5K_SLOT_TIME_9 || slot_time > AR5K_SLOT_TIME_MAX)
-		return -EINVAL;
-
-	if (ah->ah_version == AR5K_AR5210)
-		ath5k_hw_reg_write(ah, ath5k_hw_htoclock(slot_time,
-				ah->ah_turbo), AR5K_SLOT_TIME);
-	else
-		ath5k_hw_reg_write(ah, slot_time, AR5K_DCU_GBL_IFS_SLOT);
-
-	return 0;
-}
-
-/*
- * Get slot time
- */
-unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	if (ah->ah_version == AR5K_AR5210)
-		return ath5k_hw_clocktoh(ath5k_hw_reg_read(ah,
-				AR5K_SLOT_TIME) & 0xffff, ah->ah_turbo);
-	else
-		return ath5k_hw_reg_read(ah, AR5K_DCU_GBL_IFS_SLOT) & 0xffff;
-}
-
-
-/******************************\
- Hardware Descriptor Functions
-\******************************/
-
-/*
- * TX Descriptor
- */
-
-/*
- * Initialize the 2-word tx descriptor on 5210/5211
- */
-static int
-ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
-	unsigned int pkt_len, unsigned int hdr_len, enum ath5k_pkt_type type,
-	unsigned int tx_power, unsigned int tx_rate0, unsigned int tx_tries0,
-	unsigned int key_index, unsigned int antenna_mode, unsigned int flags,
-	unsigned int rtscts_rate, unsigned int rtscts_duration)
-{
-	u32 frame_type;
-	struct ath5k_hw_2w_tx_ctl *tx_ctl;
-	unsigned int frame_len;
-
-	tx_ctl = &desc->ud.ds_tx5210.tx_ctl;
-
-	/*
-	 * Validate input
-	 * - Zero retries don't make sense.
-	 * - A zero rate will put the HW into a mode where it continously sends
-	 *   noise on the channel, so it is important to avoid this.
-	 */
-	if (unlikely(tx_tries0 == 0)) {
-		ATH5K_ERR(ah->ah_sc, "zero retries\n");
-		WARN_ON(1);
-		return -EINVAL;
-	}
-	if (unlikely(tx_rate0 == 0)) {
-		ATH5K_ERR(ah->ah_sc, "zero rate\n");
-		WARN_ON(1);
-		return -EINVAL;
-	}
-
-	/* Clear descriptor */
-	memset(&desc->ud.ds_tx5210, 0, sizeof(struct ath5k_hw_5210_tx_desc));
-
-	/* Setup control descriptor */
-
-	/* Verify and set frame length */
-
-	/* remove padding we might have added before */
-	frame_len = pkt_len - (hdr_len & 3) + FCS_LEN;
-
-	if (frame_len & ~AR5K_2W_TX_DESC_CTL0_FRAME_LEN)
-		return -EINVAL;
-
-	tx_ctl->tx_control_0 = frame_len & AR5K_2W_TX_DESC_CTL0_FRAME_LEN;
-
-	/* Verify and set buffer length */
-
-	/* NB: beacon's BufLen must be a multiple of 4 bytes */
-	if(type == AR5K_PKT_TYPE_BEACON)
-		pkt_len = roundup(pkt_len, 4);
-
-	if (pkt_len & ~AR5K_2W_TX_DESC_CTL1_BUF_LEN)
-		return -EINVAL;
-
-	tx_ctl->tx_control_1 = pkt_len & AR5K_2W_TX_DESC_CTL1_BUF_LEN;
-
-	/*
-	 * Verify and set header length
-	 * XXX: I only found that on 5210 code, does it work on 5211 ?
-	 */
-	if (ah->ah_version == AR5K_AR5210) {
-		if (hdr_len & ~AR5K_2W_TX_DESC_CTL0_HEADER_LEN)
-			return -EINVAL;
-		tx_ctl->tx_control_0 |=
-			AR5K_REG_SM(hdr_len, AR5K_2W_TX_DESC_CTL0_HEADER_LEN);
-	}
-
-	/*Diferences between 5210-5211*/
-	if (ah->ah_version == AR5K_AR5210) {
-		switch (type) {
-		case AR5K_PKT_TYPE_BEACON:
-		case AR5K_PKT_TYPE_PROBE_RESP:
-			frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY;
-		case AR5K_PKT_TYPE_PIFS:
-			frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS;
-		default:
-			frame_type = type /*<< 2 ?*/;
-		}
-
-		tx_ctl->tx_control_0 |=
-			AR5K_REG_SM(frame_type, AR5K_2W_TX_DESC_CTL0_FRAME_TYPE) |
-			AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE);
-	} else {
-		tx_ctl->tx_control_0 |=
-			AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE) |
-			AR5K_REG_SM(antenna_mode, AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT);
-		tx_ctl->tx_control_1 |=
-			AR5K_REG_SM(type, AR5K_2W_TX_DESC_CTL1_FRAME_TYPE);
-	}
-#define _TX_FLAGS(_c, _flag)						\
-	if (flags & AR5K_TXDESC_##_flag)				\
-		tx_ctl->tx_control_##_c |=				\
-			AR5K_2W_TX_DESC_CTL##_c##_##_flag
-
-	_TX_FLAGS(0, CLRDMASK);
-	_TX_FLAGS(0, VEOL);
-	_TX_FLAGS(0, INTREQ);
-	_TX_FLAGS(0, RTSENA);
-	_TX_FLAGS(1, NOACK);
-
-#undef _TX_FLAGS
-
-	/*
-	 * WEP crap
-	 */
-	if (key_index != AR5K_TXKEYIX_INVALID) {
-		tx_ctl->tx_control_0 |=
-			AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID;
-		tx_ctl->tx_control_1 |=
-			AR5K_REG_SM(key_index,
-			AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX);
-	}
-
-	/*
-	 * RTS/CTS Duration [5210 ?]
-	 */
-	if ((ah->ah_version == AR5K_AR5210) &&
-			(flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)))
-		tx_ctl->tx_control_1 |= rtscts_duration &
-				AR5K_2W_TX_DESC_CTL1_RTS_DURATION;
-
-	return 0;
-}
-
-/*
- * Initialize the 4-word tx descriptor on 5212
- */
-static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah,
-	struct ath5k_desc *desc, unsigned int pkt_len, unsigned int hdr_len,
-	enum ath5k_pkt_type type, unsigned int tx_power, unsigned int tx_rate0,
-	unsigned int tx_tries0, unsigned int key_index,
-	unsigned int antenna_mode, unsigned int flags, unsigned int rtscts_rate,
-	unsigned int rtscts_duration)
-{
-	struct ath5k_hw_4w_tx_ctl *tx_ctl;
-	unsigned int frame_len;
-
-	ATH5K_TRACE(ah->ah_sc);
-	tx_ctl = &desc->ud.ds_tx5212.tx_ctl;
-
-	/*
-	 * Validate input
-	 * - Zero retries don't make sense.
-	 * - A zero rate will put the HW into a mode where it continously sends
-	 *   noise on the channel, so it is important to avoid this.
-	 */
-	if (unlikely(tx_tries0 == 0)) {
-		ATH5K_ERR(ah->ah_sc, "zero retries\n");
-		WARN_ON(1);
-		return -EINVAL;
-	}
-	if (unlikely(tx_rate0 == 0)) {
-		ATH5K_ERR(ah->ah_sc, "zero rate\n");
-		WARN_ON(1);
-		return -EINVAL;
-	}
-
-	/* Clear descriptor */
-	memset(&desc->ud.ds_tx5212, 0, sizeof(struct ath5k_hw_5212_tx_desc));
-
-	/* Setup control descriptor */
-
-	/* Verify and set frame length */
-
-	/* remove padding we might have added before */
-	frame_len = pkt_len - (hdr_len & 3) + FCS_LEN;
-
-	if (frame_len & ~AR5K_4W_TX_DESC_CTL0_FRAME_LEN)
-		return -EINVAL;
-
-	tx_ctl->tx_control_0 = frame_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN;
-
-	/* Verify and set buffer length */
-
-	/* NB: beacon's BufLen must be a multiple of 4 bytes */
-	if(type == AR5K_PKT_TYPE_BEACON)
-		pkt_len = roundup(pkt_len, 4);
-
-	if (pkt_len & ~AR5K_4W_TX_DESC_CTL1_BUF_LEN)
-		return -EINVAL;
-
-	tx_ctl->tx_control_1 = pkt_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN;
-
-	tx_ctl->tx_control_0 |=
-		AR5K_REG_SM(tx_power, AR5K_4W_TX_DESC_CTL0_XMIT_POWER) |
-		AR5K_REG_SM(antenna_mode, AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT);
-	tx_ctl->tx_control_1 |= AR5K_REG_SM(type,
-					AR5K_4W_TX_DESC_CTL1_FRAME_TYPE);
-	tx_ctl->tx_control_2 = AR5K_REG_SM(tx_tries0 + AR5K_TUNE_HWTXTRIES,
-					AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0);
-	tx_ctl->tx_control_3 = tx_rate0 & AR5K_4W_TX_DESC_CTL3_XMIT_RATE0;
-
-#define _TX_FLAGS(_c, _flag)			\
-	if (flags & AR5K_TXDESC_##_flag)	\
-		tx_ctl->tx_control_##_c |=	\
-			AR5K_4W_TX_DESC_CTL##_c##_##_flag
-
-	_TX_FLAGS(0, CLRDMASK);
-	_TX_FLAGS(0, VEOL);
-	_TX_FLAGS(0, INTREQ);
-	_TX_FLAGS(0, RTSENA);
-	_TX_FLAGS(0, CTSENA);
-	_TX_FLAGS(1, NOACK);
-
-#undef _TX_FLAGS
-
-	/*
-	 * WEP crap
-	 */
-	if (key_index != AR5K_TXKEYIX_INVALID) {
-		tx_ctl->tx_control_0 |= AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID;
-		tx_ctl->tx_control_1 |= AR5K_REG_SM(key_index,
-				AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX);
-	}
-
-	/*
-	 * RTS/CTS
-	 */
-	if (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)) {
-		if ((flags & AR5K_TXDESC_RTSENA) &&
-				(flags & AR5K_TXDESC_CTSENA))
-			return -EINVAL;
-		tx_ctl->tx_control_2 |= rtscts_duration &
-				AR5K_4W_TX_DESC_CTL2_RTS_DURATION;
-		tx_ctl->tx_control_3 |= AR5K_REG_SM(rtscts_rate,
-				AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE);
-	}
-
-	return 0;
-}
-
-/*
- * Initialize a 4-word multirate tx descriptor on 5212
- */
-static int
-ath5k_hw_setup_xr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
-	unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, u_int tx_tries2,
-	unsigned int tx_rate3, u_int tx_tries3)
-{
-	struct ath5k_hw_4w_tx_ctl *tx_ctl;
-
-	/*
-	 * Rates can be 0 as long as the retry count is 0 too.
-	 * A zero rate and nonzero retry count will put the HW into a mode where
-	 * it continously sends noise on the channel, so it is important to
-	 * avoid this.
-	 */
-	if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) ||
-		     (tx_rate2 == 0 && tx_tries2 != 0) ||
-		     (tx_rate3 == 0 && tx_tries3 != 0))) {
-		ATH5K_ERR(ah->ah_sc, "zero rate\n");
-		WARN_ON(1);
-		return -EINVAL;
-	}
-
-	if (ah->ah_version == AR5K_AR5212) {
-		tx_ctl = &desc->ud.ds_tx5212.tx_ctl;
-
-#define _XTX_TRIES(_n)							\
-	if (tx_tries##_n) {						\
-		tx_ctl->tx_control_2 |=				\
-		    AR5K_REG_SM(tx_tries##_n,				\
-		    AR5K_4W_TX_DESC_CTL2_XMIT_TRIES##_n);		\
-		tx_ctl->tx_control_3 |=				\
-		    AR5K_REG_SM(tx_rate##_n,				\
-		    AR5K_4W_TX_DESC_CTL3_XMIT_RATE##_n);		\
-	}
-
-		_XTX_TRIES(1);
-		_XTX_TRIES(2);
-		_XTX_TRIES(3);
-
-#undef _XTX_TRIES
-
-		return 1;
-	}
-
-	return 0;
-}
-
-/*
- * Proccess the tx status descriptor on 5210/5211
- */
-static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah,
-		struct ath5k_desc *desc, struct ath5k_tx_status *ts)
-{
-	struct ath5k_hw_2w_tx_ctl *tx_ctl;
-	struct ath5k_hw_tx_status *tx_status;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	tx_ctl = &desc->ud.ds_tx5210.tx_ctl;
-	tx_status = &desc->ud.ds_tx5210.tx_stat;
-
-	/* No frame has been send or error */
-	if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0))
-		return -EINPROGRESS;
-
-	/*
-	 * Get descriptor status
-	 */
-	ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0,
-		AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP);
-	ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0,
-		AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT);
-	ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0,
-		AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT);
-	/*TODO: ts->ts_virtcol + test*/
-	ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1,
-		AR5K_DESC_TX_STATUS1_SEQ_NUM);
-	ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1,
-		AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH);
-	ts->ts_antenna = 1;
-	ts->ts_status = 0;
-	ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_0,
-		AR5K_2W_TX_DESC_CTL0_XMIT_RATE);
-
-	if ((tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK) == 0){
-		if (tx_status->tx_status_0 &
-				AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES)
-			ts->ts_status |= AR5K_TXERR_XRETRY;
-
-		if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN)
-			ts->ts_status |= AR5K_TXERR_FIFO;
-
-		if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED)
-			ts->ts_status |= AR5K_TXERR_FILT;
-	}
-
-	return 0;
-}
-
-/*
- * Proccess a tx descriptor on 5212
- */
-static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah,
-		struct ath5k_desc *desc, struct ath5k_tx_status *ts)
-{
-	struct ath5k_hw_4w_tx_ctl *tx_ctl;
-	struct ath5k_hw_tx_status *tx_status;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	tx_ctl = &desc->ud.ds_tx5212.tx_ctl;
-	tx_status = &desc->ud.ds_tx5212.tx_stat;
-
-	/* No frame has been send or error */
-	if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0))
-		return -EINPROGRESS;
-
-	/*
-	 * Get descriptor status
-	 */
-	ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0,
-		AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP);
-	ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0,
-		AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT);
-	ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0,
-		AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT);
-	ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1,
-		AR5K_DESC_TX_STATUS1_SEQ_NUM);
-	ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1,
-		AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH);
-	ts->ts_antenna = (tx_status->tx_status_1 &
-		AR5K_DESC_TX_STATUS1_XMIT_ANTENNA) ? 2 : 1;
-	ts->ts_status = 0;
-
-	switch (AR5K_REG_MS(tx_status->tx_status_1,
-			AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX)) {
-	case 0:
-		ts->ts_rate = tx_ctl->tx_control_3 &
-			AR5K_4W_TX_DESC_CTL3_XMIT_RATE0;
-		break;
-	case 1:
-		ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3,
-			AR5K_4W_TX_DESC_CTL3_XMIT_RATE1);
-		ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2,
-			AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1);
-		break;
-	case 2:
-		ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3,
-			AR5K_4W_TX_DESC_CTL3_XMIT_RATE2);
-		ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2,
-			AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2);
-		break;
-	case 3:
-		ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3,
-			AR5K_4W_TX_DESC_CTL3_XMIT_RATE3);
-		ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2,
-			AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3);
-		break;
-	}
-
-	if ((tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK) == 0){
-		if (tx_status->tx_status_0 &
-				AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES)
-			ts->ts_status |= AR5K_TXERR_XRETRY;
-
-		if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN)
-			ts->ts_status |= AR5K_TXERR_FIFO;
-
-		if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED)
-			ts->ts_status |= AR5K_TXERR_FILT;
-	}
-
-	return 0;
-}
-
-/*
- * RX Descriptor
- */
-
-/*
- * Initialize an rx descriptor
- */
-int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
-			u32 size, unsigned int flags)
-{
-	struct ath5k_hw_rx_ctl *rx_ctl;
-
-	ATH5K_TRACE(ah->ah_sc);
-	rx_ctl = &desc->ud.ds_rx.rx_ctl;
-
-	/*
-	 * Clear the descriptor
-	 * If we don't clean the status descriptor,
-	 * while scanning we get too many results,
-	 * most of them virtual, after some secs
-	 * of scanning system hangs. M.F.
-	*/
-	memset(&desc->ud.ds_rx, 0, sizeof(struct ath5k_hw_all_rx_desc));
-
-	/* Setup descriptor */
-	rx_ctl->rx_control_1 = size & AR5K_DESC_RX_CTL1_BUF_LEN;
-	if (unlikely(rx_ctl->rx_control_1 != size))
-		return -EINVAL;
-
-	if (flags & AR5K_RXDESC_INTREQ)
-		rx_ctl->rx_control_1 |= AR5K_DESC_RX_CTL1_INTREQ;
-
-	return 0;
-}
-
-/*
- * Proccess the rx status descriptor on 5210/5211
- */
-static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah,
-		struct ath5k_desc *desc, struct ath5k_rx_status *rs)
-{
-	struct ath5k_hw_rx_status *rx_status;
-
-	rx_status = &desc->ud.ds_rx.u.rx_stat;
-
-	/* No frame received / not ready */
-	if (unlikely((rx_status->rx_status_1 & AR5K_5210_RX_DESC_STATUS1_DONE)
-				== 0))
-		return -EINPROGRESS;
-
-	/*
-	 * Frame receive status
-	 */
-	rs->rs_datalen = rx_status->rx_status_0 &
-		AR5K_5210_RX_DESC_STATUS0_DATA_LEN;
-	rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0,
-		AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL);
-	rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0,
-		AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE);
-	rs->rs_antenna = rx_status->rx_status_0 &
-		AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA;
-	rs->rs_more = rx_status->rx_status_0 &
-		AR5K_5210_RX_DESC_STATUS0_MORE;
-	/* TODO: this timestamp is 13 bit, later on we assume 15 bit */
-	rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
-		AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
-	rs->rs_status = 0;
-	rs->rs_phyerr = 0;
-
-	/*
-	 * Key table status
-	 */
-	if (rx_status->rx_status_1 & AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID)
-		rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1,
-			AR5K_5210_RX_DESC_STATUS1_KEY_INDEX);
-	else
-		rs->rs_keyix = AR5K_RXKEYIX_INVALID;
-
-	/*
-	 * Receive/descriptor errors
-	 */
-	if ((rx_status->rx_status_1 &
-			AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK) == 0) {
-		if (rx_status->rx_status_1 &
-				AR5K_5210_RX_DESC_STATUS1_CRC_ERROR)
-			rs->rs_status |= AR5K_RXERR_CRC;
-
-		if (rx_status->rx_status_1 &
-				AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN)
-			rs->rs_status |= AR5K_RXERR_FIFO;
-
-		if (rx_status->rx_status_1 &
-				AR5K_5210_RX_DESC_STATUS1_PHY_ERROR) {
-			rs->rs_status |= AR5K_RXERR_PHY;
-			rs->rs_phyerr |= AR5K_REG_MS(rx_status->rx_status_1,
-					   AR5K_5210_RX_DESC_STATUS1_PHY_ERROR);
-		}
-
-		if (rx_status->rx_status_1 &
-				AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR)
-			rs->rs_status |= AR5K_RXERR_DECRYPT;
-	}
-
-	return 0;
-}
-
-/*
- * Proccess the rx status descriptor on 5212
- */
-static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah,
-		struct ath5k_desc *desc, struct ath5k_rx_status *rs)
-{
-	struct ath5k_hw_rx_status *rx_status;
-	struct ath5k_hw_rx_error *rx_err;
-
-	ATH5K_TRACE(ah->ah_sc);
-	rx_status = &desc->ud.ds_rx.u.rx_stat;
-
-	/* Overlay on error */
-	rx_err = &desc->ud.ds_rx.u.rx_err;
-
-	/* No frame received / not ready */
-	if (unlikely((rx_status->rx_status_1 & AR5K_5212_RX_DESC_STATUS1_DONE)
-				== 0))
-		return -EINPROGRESS;
-
-	/*
-	 * Frame receive status
-	 */
-	rs->rs_datalen = rx_status->rx_status_0 &
-		AR5K_5212_RX_DESC_STATUS0_DATA_LEN;
-	rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0,
-		AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL);
-	rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0,
-		AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE);
-	rs->rs_antenna = rx_status->rx_status_0 &
-		AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA;
-	rs->rs_more = rx_status->rx_status_0 &
-		AR5K_5212_RX_DESC_STATUS0_MORE;
-	rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
-		AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
-	rs->rs_status = 0;
-	rs->rs_phyerr = 0;
-
-	/*
-	 * Key table status
-	 */
-	if (rx_status->rx_status_1 & AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID)
-		rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1,
-				AR5K_5212_RX_DESC_STATUS1_KEY_INDEX);
-	else
-		rs->rs_keyix = AR5K_RXKEYIX_INVALID;
-
-	/*
-	 * Receive/descriptor errors
-	 */
-	if ((rx_status->rx_status_1 &
-			AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK) == 0) {
-		if (rx_status->rx_status_1 &
-				AR5K_5212_RX_DESC_STATUS1_CRC_ERROR)
-			rs->rs_status |= AR5K_RXERR_CRC;
-
-		if (rx_status->rx_status_1 &
-				AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) {
-			rs->rs_status |= AR5K_RXERR_PHY;
-			rs->rs_phyerr |= AR5K_REG_MS(rx_err->rx_error_1,
-					   AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE);
-		}
-
-		if (rx_status->rx_status_1 &
-				AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR)
-			rs->rs_status |= AR5K_RXERR_DECRYPT;
-
-		if (rx_status->rx_status_1 &
-				AR5K_5212_RX_DESC_STATUS1_MIC_ERROR)
-			rs->rs_status |= AR5K_RXERR_MIC;
-	}
-
-	return 0;
-}
-
-
-/****************\
-  GPIO Functions
-\****************/
-
-/*
- * Set led state
- */
-void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state)
-{
-	u32 led;
-	/*5210 has different led mode handling*/
-	u32 led_5210;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	/*Reset led status*/
-	if (ah->ah_version != AR5K_AR5210)
-		AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG,
-			AR5K_PCICFG_LEDMODE |  AR5K_PCICFG_LED);
-	else
-		AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_LED);
-
-	/*
-	 * Some blinking values, define at your wish
-	 */
-	switch (state) {
-	case AR5K_LED_SCAN:
-	case AR5K_LED_AUTH:
-		led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_PEND;
-		led_5210 = AR5K_PCICFG_LED_PEND | AR5K_PCICFG_LED_BCTL;
-		break;
-
-	case AR5K_LED_INIT:
-		led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_NONE;
-		led_5210 = AR5K_PCICFG_LED_PEND;
-		break;
-
-	case AR5K_LED_ASSOC:
-	case AR5K_LED_RUN:
-		led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_ASSOC;
-		led_5210 = AR5K_PCICFG_LED_ASSOC;
-		break;
-
-	default:
-		led = AR5K_PCICFG_LEDMODE_PROM | AR5K_PCICFG_LED_NONE;
-		led_5210 = AR5K_PCICFG_LED_PEND;
-		break;
-	}
-
-	/*Write new status to the register*/
-	if (ah->ah_version != AR5K_AR5210)
-		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led);
-	else
-		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led_5210);
-}
-
-/*
- * Set GPIO outputs
- */
-int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	if (gpio > AR5K_NUM_GPIO)
-		return -EINVAL;
-
-	ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &~
-		AR5K_GPIOCR_OUT(gpio)) | AR5K_GPIOCR_OUT(gpio), AR5K_GPIOCR);
-
-	return 0;
-}
-
-/*
- * Set GPIO inputs
- */
-int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	if (gpio > AR5K_NUM_GPIO)
-		return -EINVAL;
-
-	ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &~
-		AR5K_GPIOCR_OUT(gpio)) | AR5K_GPIOCR_IN(gpio), AR5K_GPIOCR);
-
-	return 0;
-}
-
-/*
- * Get GPIO state
- */
-u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	if (gpio > AR5K_NUM_GPIO)
-		return 0xffffffff;
-
-	/* GPIO input magic */
-	return ((ath5k_hw_reg_read(ah, AR5K_GPIODI) & AR5K_GPIODI_M) >> gpio) &
-		0x1;
-}
-
-/*
- * Set GPIO state
- */
-int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val)
-{
-	u32 data;
-	ATH5K_TRACE(ah->ah_sc);
-
-	if (gpio > AR5K_NUM_GPIO)
-		return -EINVAL;
-
-	/* GPIO output magic */
-	data = ath5k_hw_reg_read(ah, AR5K_GPIODO);
-
-	data &= ~(1 << gpio);
-	data |= (val & 1) << gpio;
-
-	ath5k_hw_reg_write(ah, data, AR5K_GPIODO);
-
-	return 0;
-}
-
-/*
- * Initialize the GPIO interrupt (RFKill switch)
- */
-void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio,
-		u32 interrupt_level)
-{
-	u32 data;
-
-	ATH5K_TRACE(ah->ah_sc);
-	if (gpio > AR5K_NUM_GPIO)
-		return;
-
-	/*
-	 * Set the GPIO interrupt
-	 */
-	data = (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &
-		~(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_SELH |
-		AR5K_GPIOCR_INT_ENA | AR5K_GPIOCR_OUT(gpio))) |
-		(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_ENA);
-
-	ath5k_hw_reg_write(ah, interrupt_level ? data :
-		(data | AR5K_GPIOCR_INT_SELH), AR5K_GPIOCR);
-
-	ah->ah_imr |= AR5K_IMR_GPIO;
-
-	/* Enable GPIO interrupts */
-	AR5K_REG_ENABLE_BITS(ah, AR5K_PIMR, AR5K_IMR_GPIO);
-}
-
-
-
-
-/****************\
-  Misc functions
-\****************/
-
-int ath5k_hw_get_capability(struct ath5k_hw *ah,
-		enum ath5k_capability_type cap_type,
-		u32 capability, u32 *result)
-{
-	ATH5K_TRACE(ah->ah_sc);
-
-	switch (cap_type) {
-	case AR5K_CAP_NUM_TXQUEUES:
-		if (result) {
-			if (ah->ah_version == AR5K_AR5210)
-				*result = AR5K_NUM_TX_QUEUES_NOQCU;
-			else
-				*result = AR5K_NUM_TX_QUEUES;
-			goto yes;
-		}
-	case AR5K_CAP_VEOL:
-		goto yes;
-	case AR5K_CAP_COMPRESSION:
-		if (ah->ah_version == AR5K_AR5212)
-			goto yes;
-		else
-			goto no;
-	case AR5K_CAP_BURST:
-		goto yes;
-	case AR5K_CAP_TPC:
-		goto yes;
-	case AR5K_CAP_BSSIDMASK:
-		if (ah->ah_version == AR5K_AR5212)
-			goto yes;
-		else
-			goto no;
-	case AR5K_CAP_XR:
-		if (ah->ah_version == AR5K_AR5212)
-			goto yes;
-		else
-			goto no;
-	default:
-		goto no;
-	}
-
-no:
-	return -EINVAL;
-yes:
-	return 0;
-}
-
-static int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid,
-		u16 assoc_id)
-{
-	ATH5K_TRACE(ah->ah_sc);
-
-	if (ah->ah_version == AR5K_AR5210) {
-		AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
-			AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA);
-		return 0;
-	}
-
-	return -EIO;
-}
-
-static int ath5k_hw_disable_pspoll(struct ath5k_hw *ah)
-{
-	ATH5K_TRACE(ah->ah_sc);
-
-	if (ah->ah_version == AR5K_AR5210) {
-		AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1,
-			AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA);
-		return 0;
-	}
-
-	return -EIO;
-}
diff --git a/drivers/net/wireless/ath5k/initvals.c b/drivers/net/wireless/ath5k/initvals.c
index 2806b21bf90..ea2e1a20b49 100644
--- a/drivers/net/wireless/ath5k/initvals.c
+++ b/drivers/net/wireless/ath5k/initvals.c
@@ -1,9 +1,9 @@
 /*
  * Initial register settings functions
  *
- * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org>
- * Copyright (c) 2006, 2007 Nick Kossifidis <mickflemm@gmail.com>
- * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
  *
  * Permission to use, copy, modify, and distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -20,13 +20,9 @@
  */
 
 #include "ath5k.h"
-#include "base.h"
 #include "reg.h"
-
-/*
- * MAC/PHY REGISTERS
- */
-
+#include "debug.h"
+#include "base.h"
 
 /*
  * Mode-independent initial register writes
@@ -65,10 +61,10 @@ static const struct ath5k_ini ar5210_ini[] = {
 	{ AR5K_TXCFG,		AR5K_DMASIZE_128B },
 	{ AR5K_RXCFG,		AR5K_DMASIZE_128B },
 	{ AR5K_CFG,		AR5K_INIT_CFG },
-	{ AR5K_TOPS,		AR5K_INIT_TOPS },
-	{ AR5K_RXNOFRM,		AR5K_INIT_RXNOFRM },
-	{ AR5K_RPGTO,		AR5K_INIT_RPGTO },
-	{ AR5K_TXNOFRM,		AR5K_INIT_TXNOFRM },
+	{ AR5K_TOPS,		8 },
+	{ AR5K_RXNOFRM,		8 },
+	{ AR5K_RPGTO,		0 },
+	{ AR5K_TXNOFRM,		0 },
 	{ AR5K_SFR,		0 },
 	{ AR5K_MIBC,		0 },
 	{ AR5K_MISC,		0 },
diff --git a/drivers/net/wireless/ath5k/pcu.c b/drivers/net/wireless/ath5k/pcu.c
new file mode 100644
index 00000000000..a47df9a24aa
--- /dev/null
+++ b/drivers/net/wireless/ath5k/pcu.c
@@ -0,0 +1,1014 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Matthew W. S. Bell  <mentor@madwifi.org>
+ * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
+ * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*********************************\
+* Protocol Control Unit Functions *
+\*********************************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*******************\
+* Generic functions *
+\*******************/
+
+/**
+ * ath5k_hw_set_opmode - Set PCU operating mode
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Initialize PCU for the various operating modes (AP/STA etc)
+ *
+ * NOTE: ah->ah_op_mode must be set before calling this.
+ */
+int ath5k_hw_set_opmode(struct ath5k_hw *ah)
+{
+	u32 pcu_reg, beacon_reg, low_id, high_id;
+
+	pcu_reg = 0;
+	beacon_reg = 0;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	switch (ah->ah_op_mode) {
+	case NL80211_IFTYPE_ADHOC:
+		pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_DESC_ANTENNA |
+			(ah->ah_version == AR5K_AR5210 ?
+				AR5K_STA_ID1_NO_PSPOLL : 0);
+		beacon_reg |= AR5K_BCR_ADHOC;
+		break;
+
+	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_MESH_POINT:
+		pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_RTS_DEF_ANTENNA |
+			(ah->ah_version == AR5K_AR5210 ?
+				AR5K_STA_ID1_NO_PSPOLL : 0);
+		beacon_reg |= AR5K_BCR_AP;
+		break;
+
+	case NL80211_IFTYPE_STATION:
+		pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA |
+			(ah->ah_version == AR5K_AR5210 ?
+				AR5K_STA_ID1_PWR_SV : 0);
+	case NL80211_IFTYPE_MONITOR:
+		pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA |
+			(ah->ah_version == AR5K_AR5210 ?
+				AR5K_STA_ID1_NO_PSPOLL : 0);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * Set PCU registers
+	 */
+	low_id = AR5K_LOW_ID(ah->ah_sta_id);
+	high_id = AR5K_HIGH_ID(ah->ah_sta_id);
+	ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
+	ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1);
+
+	/*
+	 * Set Beacon Control Register on 5210
+	 */
+	if (ah->ah_version == AR5K_AR5210)
+		ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR);
+
+	return 0;
+}
+
+/**
+ * ath5k_hw_update - Update mib counters (mac layer statistics)
+ *
+ * @ah: The &struct ath5k_hw
+ * @stats: The &struct ieee80211_low_level_stats we use to track
+ * statistics on the driver
+ *
+ * Reads MIB counters from PCU and updates sw statistics. Must be
+ * called after a MIB interrupt.
+ */
+void ath5k_hw_update_mib_counters(struct ath5k_hw *ah,
+		struct ieee80211_low_level_stats  *stats)
+{
+	ATH5K_TRACE(ah->ah_sc);
+
+	/* Read-And-Clear */
+	stats->dot11ACKFailureCount += ath5k_hw_reg_read(ah, AR5K_ACK_FAIL);
+	stats->dot11RTSFailureCount += ath5k_hw_reg_read(ah, AR5K_RTS_FAIL);
+	stats->dot11RTSSuccessCount += ath5k_hw_reg_read(ah, AR5K_RTS_OK);
+	stats->dot11FCSErrorCount += ath5k_hw_reg_read(ah, AR5K_FCS_FAIL);
+
+	/* XXX: Should we use this to track beacon count ?
+	 * -we read it anyway to clear the register */
+	ath5k_hw_reg_read(ah, AR5K_BEACON_CNT);
+
+	/* Reset profile count registers on 5212*/
+	if (ah->ah_version == AR5K_AR5212) {
+		ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_TX);
+		ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RX);
+		ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RXCLR);
+		ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_CYCLE);
+	}
+}
+
+/**
+ * ath5k_hw_set_ack_bitrate - set bitrate for ACKs
+ *
+ * @ah: The &struct ath5k_hw
+ * @high: Flag to determine if we want to use high transmition rate
+ * for ACKs or not
+ *
+ * If high flag is set, we tell hw to use a set of control rates based on
+ * the current transmition rate (check out control_rates array inside reset.c).
+ * If not hw just uses the lowest rate available for the current modulation
+ * scheme being used (1Mbit for CCK and 6Mbits for OFDM).
+ */
+void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high)
+{
+	if (ah->ah_version != AR5K_AR5212)
+		return;
+	else {
+		u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB;
+		if (high)
+			AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val);
+		else
+			AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val);
+	}
+}
+
+
+/******************\
+* ACK/CTS Timeouts *
+\******************/
+
+/**
+ * ath5k_hw_het_ack_timeout - Get ACK timeout from PCU in usec
+ *
+ * @ah: The &struct ath5k_hw
+ */
+unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah)
+{
+	ATH5K_TRACE(ah->ah_sc);
+
+	return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah,
+			AR5K_TIME_OUT), AR5K_TIME_OUT_ACK), ah->ah_turbo);
+}
+
+/**
+ * ath5k_hw_set_ack_timeout - Set ACK timeout on PCU
+ *
+ * @ah: The &struct ath5k_hw
+ * @timeout: Timeout in usec
+ */
+int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK),
+			ah->ah_turbo) <= timeout)
+		return -EINVAL;
+
+	AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_ACK,
+		ath5k_hw_htoclock(timeout, ah->ah_turbo));
+
+	return 0;
+}
+
+/**
+ * ath5k_hw_get_cts_timeout - Get CTS timeout from PCU in usec
+ *
+ * @ah: The &struct ath5k_hw
+ */
+unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah,
+			AR5K_TIME_OUT), AR5K_TIME_OUT_CTS), ah->ah_turbo);
+}
+
+/**
+ * ath5k_hw_set_cts_timeout - Set CTS timeout on PCU
+ *
+ * @ah: The &struct ath5k_hw
+ * @timeout: Timeout in usec
+ */
+int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS),
+			ah->ah_turbo) <= timeout)
+		return -EINVAL;
+
+	AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_CTS,
+			ath5k_hw_htoclock(timeout, ah->ah_turbo));
+
+	return 0;
+}
+
+
+/****************\
+* BSSID handling *
+\****************/
+
+/**
+ * ath5k_hw_get_lladdr - Get station id
+ *
+ * @ah: The &struct ath5k_hw
+ * @mac: The card's mac address
+ *
+ * Initialize ah->ah_sta_id using the mac address provided
+ * (just a memcpy).
+ *
+ * TODO: Remove it once we merge ath5k_softc and ath5k_hw
+ */
+void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	memcpy(mac, ah->ah_sta_id, ETH_ALEN);
+}
+
+/**
+ * ath5k_hw_set_lladdr - Set station id
+ *
+ * @ah: The &struct ath5k_hw
+ * @mac: The card's mac address
+ *
+ * Set station id on hw using the provided mac address
+ */
+int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac)
+{
+	u32 low_id, high_id;
+
+	ATH5K_TRACE(ah->ah_sc);
+	/* Set new station ID */
+	memcpy(ah->ah_sta_id, mac, ETH_ALEN);
+
+	low_id = AR5K_LOW_ID(mac);
+	high_id = AR5K_HIGH_ID(mac);
+
+	ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
+	ath5k_hw_reg_write(ah, high_id, AR5K_STA_ID1);
+
+	return 0;
+}
+
+/**
+ * ath5k_hw_set_associd - Set BSSID for association
+ *
+ * @ah: The &struct ath5k_hw
+ * @bssid: BSSID
+ * @assoc_id: Assoc id
+ *
+ * Sets the BSSID which trigers the "SME Join" operation
+ */
+void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id)
+{
+	u32 low_id, high_id;
+	u16 tim_offset = 0;
+
+	/*
+	 * Set simple BSSID mask on 5212
+	 */
+	if (ah->ah_version == AR5K_AR5212) {
+		ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM0);
+		ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM1);
+	}
+
+	/*
+	 * Set BSSID which triggers the "SME Join" operation
+	 */
+	low_id = AR5K_LOW_ID(bssid);
+	high_id = AR5K_HIGH_ID(bssid);
+	ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0);
+	ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) <<
+				AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1);
+
+	if (assoc_id == 0) {
+		ath5k_hw_disable_pspoll(ah);
+		return;
+	}
+
+	AR5K_REG_WRITE_BITS(ah, AR5K_BEACON, AR5K_BEACON_TIM,
+			tim_offset ? tim_offset + 4 : 0);
+
+	ath5k_hw_enable_pspoll(ah, NULL, 0);
+}
+
+/**
+ * ath5k_hw_set_bssid_mask - filter out bssids we listen
+ *
+ * @ah: the &struct ath5k_hw
+ * @mask: the bssid_mask, a u8 array of size ETH_ALEN
+ *
+ * BSSID masking is a method used by AR5212 and newer hardware to inform PCU
+ * which bits of the interface's MAC address should be looked at when trying
+ * to decide which packets to ACK. In station mode and AP mode with a single
+ * BSS every bit matters since we lock to only one BSS. In AP mode with
+ * multiple BSSes (virtual interfaces) not every bit matters because hw must
+ * accept frames for all BSSes and so we tweak some bits of our mac address
+ * in order to have multiple BSSes.
+ *
+ * NOTE: This is a simple filter and does *not* filter out all
+ * relevant frames. Some frames that are not for us might get ACKed from us
+ * by PCU because they just match the mask.
+ *
+ * When handling multiple BSSes you can get the BSSID mask by computing the
+ * set of  ~ ( MAC XOR BSSID ) for all bssids we handle.
+ *
+ * When you do this you are essentially computing the common bits of all your
+ * BSSes. Later it is assumed the harware will "and" (&) the BSSID mask with
+ * the MAC address to obtain the relevant bits and compare the result with
+ * (frame's BSSID & mask) to see if they match.
+ */
+/*
+ * Simple example: on your card you have have two BSSes you have created with
+ * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address.
+ * There is another BSSID-03 but you are not part of it. For simplicity's sake,
+ * assuming only 4 bits for a mac address and for BSSIDs you can then have:
+ *
+ *                  \
+ * MAC:                0001 |
+ * BSSID-01:   0100 | --> Belongs to us
+ * BSSID-02:   1001 |
+ *                  /
+ * -------------------
+ * BSSID-03:   0110  | --> External
+ * -------------------
+ *
+ * Our bssid_mask would then be:
+ *
+ *             On loop iteration for BSSID-01:
+ *             ~(0001 ^ 0100)  -> ~(0101)
+ *                             ->   1010
+ *             bssid_mask      =    1010
+ *
+ *             On loop iteration for BSSID-02:
+ *             bssid_mask &= ~(0001   ^   1001)
+ *             bssid_mask =   (1010)  & ~(0001 ^ 1001)
+ *             bssid_mask =   (1010)  & ~(1001)
+ *             bssid_mask =   (1010)  &  (0110)
+ *             bssid_mask =   0010
+ *
+ * A bssid_mask of 0010 means "only pay attention to the second least
+ * significant bit". This is because its the only bit common
+ * amongst the MAC and all BSSIDs we support. To findout what the real
+ * common bit is we can simply "&" the bssid_mask now with any BSSID we have
+ * or our MAC address (we assume the hardware uses the MAC address).
+ *
+ * Now, suppose there's an incoming frame for BSSID-03:
+ *
+ * IFRAME-01:  0110
+ *
+ * An easy eye-inspeciton of this already should tell you that this frame
+ * will not pass our check. This is beacuse the bssid_mask tells the
+ * hardware to only look at the second least significant bit and the
+ * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB
+ * as 1, which does not match 0.
+ *
+ * So with IFRAME-01 we *assume* the hardware will do:
+ *
+ *     allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
+ *  --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0;
+ *  --> allow = (0010) == 0000 ? 1 : 0;
+ *  --> allow = 0
+ *
+ *  Lets now test a frame that should work:
+ *
+ * IFRAME-02:  0001 (we should allow)
+ *
+ *     allow = (0001 & 1010) == 1010
+ *
+ *     allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
+ *  --> allow = (0001 & 0010) ==  (0010 & 0001) ? 1 :0;
+ *  --> allow = (0010) == (0010)
+ *  --> allow = 1
+ *
+ * Other examples:
+ *
+ * IFRAME-03:  0100 --> allowed
+ * IFRAME-04:  1001 --> allowed
+ * IFRAME-05:  1101 --> allowed but its not for us!!!
+ *
+ */
+int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
+{
+	u32 low_id, high_id;
+	ATH5K_TRACE(ah->ah_sc);
+
+	if (ah->ah_version == AR5K_AR5212) {
+		low_id = AR5K_LOW_ID(mask);
+		high_id = AR5K_HIGH_ID(mask);
+
+		ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0);
+		ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1);
+
+		return 0;
+	}
+
+	return -EIO;
+}
+
+
+/************\
+* RX Control *
+\************/
+
+/**
+ * ath5k_hw_start_rx_pcu - Start RX engine
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Starts RX engine on PCU so that hw can process RXed frames
+ * (ACK etc).
+ *
+ * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma
+ * TODO: Init ANI here
+ */
+void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
+}
+
+/**
+ * at5k_hw_stop_rx_pcu - Stop RX engine
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Stops RX engine on PCU
+ *
+ * TODO: Detach ANI here
+ */
+void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
+}
+
+/*
+ * Set multicast filter
+ */
+void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	/* Set the multicat filter */
+	ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0);
+	ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1);
+}
+
+/*
+ * Set multicast filter by index
+ */
+int ath5k_hw_set_mcast_filter_idx(struct ath5k_hw *ah, u32 index)
+{
+
+	ATH5K_TRACE(ah->ah_sc);
+	if (index >= 64)
+		return -EINVAL;
+	else if (index >= 32)
+		AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER1,
+				(1 << (index - 32)));
+	else
+		AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index));
+
+	return 0;
+}
+
+/*
+ * Clear Multicast filter by index
+ */
+int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index)
+{
+
+	ATH5K_TRACE(ah->ah_sc);
+	if (index >= 64)
+		return -EINVAL;
+	else if (index >= 32)
+		AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER1,
+				(1 << (index - 32)));
+	else
+		AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index));
+
+	return 0;
+}
+
+/**
+ * ath5k_hw_get_rx_filter - Get current rx filter
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Returns the RX filter by reading rx filter and
+ * phy error filter registers. RX filter is used
+ * to set the allowed frame types that PCU will accept
+ * and pass to the driver. For a list of frame types
+ * check out reg.h.
+ */
+u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah)
+{
+	u32 data, filter = 0;
+
+	ATH5K_TRACE(ah->ah_sc);
+	filter = ath5k_hw_reg_read(ah, AR5K_RX_FILTER);
+
+	/*Radar detection for 5212*/
+	if (ah->ah_version == AR5K_AR5212) {
+		data = ath5k_hw_reg_read(ah, AR5K_PHY_ERR_FIL);
+
+		if (data & AR5K_PHY_ERR_FIL_RADAR)
+			filter |= AR5K_RX_FILTER_RADARERR;
+		if (data & (AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK))
+			filter |= AR5K_RX_FILTER_PHYERR;
+	}
+
+	return filter;
+}
+
+/**
+ * ath5k_hw_set_rx_filter - Set rx filter
+ *
+ * @ah: The &struct ath5k_hw
+ * @filter: RX filter mask (see reg.h)
+ *
+ * Sets RX filter register and also handles PHY error filter
+ * register on 5212 and newer chips so that we have proper PHY
+ * error reporting.
+ */
+void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter)
+{
+	u32 data = 0;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	/* Set PHY error filter register on 5212*/
+	if (ah->ah_version == AR5K_AR5212) {
+		if (filter & AR5K_RX_FILTER_RADARERR)
+			data |= AR5K_PHY_ERR_FIL_RADAR;
+		if (filter & AR5K_RX_FILTER_PHYERR)
+			data |= AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK;
+	}
+
+	/*
+	 * The AR5210 uses promiscous mode to detect radar activity
+	 */
+	if (ah->ah_version == AR5K_AR5210 &&
+			(filter & AR5K_RX_FILTER_RADARERR)) {
+		filter &= ~AR5K_RX_FILTER_RADARERR;
+		filter |= AR5K_RX_FILTER_PROM;
+	}
+
+	/*Zero length DMA*/
+	if (data)
+		AR5K_REG_ENABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA);
+	else
+		AR5K_REG_DISABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA);
+
+	/*Write RX Filter register*/
+	ath5k_hw_reg_write(ah, filter & 0xff, AR5K_RX_FILTER);
+
+	/*Write PHY error filter register on 5212*/
+	if (ah->ah_version == AR5K_AR5212)
+		ath5k_hw_reg_write(ah, data, AR5K_PHY_ERR_FIL);
+
+}
+
+
+/****************\
+* Beacon control *
+\****************/
+
+/**
+ * ath5k_hw_get_tsf32 - Get a 32bit TSF
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Returns lower 32 bits of current TSF
+ */
+u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	return ath5k_hw_reg_read(ah, AR5K_TSF_L32);
+}
+
+/**
+ * ath5k_hw_get_tsf64 - Get the full 64bit TSF
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Returns the current TSF
+ */
+u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah)
+{
+	u64 tsf = ath5k_hw_reg_read(ah, AR5K_TSF_U32);
+	ATH5K_TRACE(ah->ah_sc);
+
+	return ath5k_hw_reg_read(ah, AR5K_TSF_L32) | (tsf << 32);
+}
+
+/**
+ * ath5k_hw_reset_tsf - Force a TSF reset
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Forces a TSF reset on PCU
+ */
+void ath5k_hw_reset_tsf(struct ath5k_hw *ah)
+{
+	u32 val;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	val = ath5k_hw_reg_read(ah, AR5K_BEACON) | AR5K_BEACON_RESET_TSF;
+
+	/*
+	 * Each write to the RESET_TSF bit toggles a hardware internal
+	 * signal to reset TSF, but if left high it will cause a TSF reset
+	 * on the next chip reset as well.  Thus we always write the value
+	 * twice to clear the signal.
+	 */
+	ath5k_hw_reg_write(ah, val, AR5K_BEACON);
+	ath5k_hw_reg_write(ah, val, AR5K_BEACON);
+}
+
+/*
+ * Initialize beacon timers
+ */
+void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval)
+{
+	u32 timer1, timer2, timer3;
+
+	ATH5K_TRACE(ah->ah_sc);
+	/*
+	 * Set the additional timers by mode
+	 */
+	switch (ah->ah_op_mode) {
+	case NL80211_IFTYPE_STATION:
+		if (ah->ah_version == AR5K_AR5210) {
+			timer1 = 0xffffffff;
+			timer2 = 0xffffffff;
+		} else {
+			timer1 = 0x0000ffff;
+			timer2 = 0x0007ffff;
+		}
+		break;
+
+	default:
+		timer1 = (next_beacon - AR5K_TUNE_DMA_BEACON_RESP) << 3;
+		timer2 = (next_beacon - AR5K_TUNE_SW_BEACON_RESP) << 3;
+	}
+
+	timer3 = next_beacon + (ah->ah_atim_window ? ah->ah_atim_window : 1);
+
+	/*
+	 * Set the beacon register and enable all timers.
+	 * (next beacon, DMA beacon, software beacon, ATIM window time)
+	 */
+	ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0);
+	ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1);
+	ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2);
+	ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3);
+
+	ath5k_hw_reg_write(ah, interval & (AR5K_BEACON_PERIOD |
+			AR5K_BEACON_RESET_TSF | AR5K_BEACON_ENABLE),
+		AR5K_BEACON);
+}
+
+#if 0
+/*
+ * Set beacon timers
+ */
+int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah,
+		const struct ath5k_beacon_state *state)
+{
+	u32 cfp_period, next_cfp, dtim, interval, next_beacon;
+
+	/*
+	 * TODO: should be changed through *state
+	 * review struct ath5k_beacon_state struct
+	 *
+	 * XXX: These are used for cfp period bellow, are they
+	 * ok ? Is it O.K. for tsf here to be 0 or should we use
+	 * get_tsf ?
+	 */
+	u32 dtim_count = 0; /* XXX */
+	u32 cfp_count = 0; /* XXX */
+	u32 tsf = 0; /* XXX */
+
+	ATH5K_TRACE(ah->ah_sc);
+	/* Return on an invalid beacon state */
+	if (state->bs_interval < 1)
+		return -EINVAL;
+
+	interval = state->bs_interval;
+	dtim = state->bs_dtim_period;
+
+	/*
+	 * PCF support?
+	 */
+	if (state->bs_cfp_period > 0) {
+		/*
+		 * Enable PCF mode and set the CFP
+		 * (Contention Free Period) and timer registers
+		 */
+		cfp_period = state->bs_cfp_period * state->bs_dtim_period *
+			state->bs_interval;
+		next_cfp = (cfp_count * state->bs_dtim_period + dtim_count) *
+			state->bs_interval;
+
+		AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1,
+				AR5K_STA_ID1_DEFAULT_ANTENNA |
+				AR5K_STA_ID1_PCF);
+		ath5k_hw_reg_write(ah, cfp_period, AR5K_CFP_PERIOD);
+		ath5k_hw_reg_write(ah, state->bs_cfp_max_duration,
+				AR5K_CFP_DUR);
+		ath5k_hw_reg_write(ah, (tsf + (next_cfp == 0 ? cfp_period :
+						next_cfp)) << 3, AR5K_TIMER2);
+	} else {
+		/* Disable PCF mode */
+		AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
+				AR5K_STA_ID1_DEFAULT_ANTENNA |
+				AR5K_STA_ID1_PCF);
+	}
+
+	/*
+	 * Enable the beacon timer register
+	 */
+	ath5k_hw_reg_write(ah, state->bs_next_beacon, AR5K_TIMER0);
+
+	/*
+	 * Start the beacon timers
+	 */
+	ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_BEACON) &
+		~(AR5K_BEACON_PERIOD | AR5K_BEACON_TIM)) |
+		AR5K_REG_SM(state->bs_tim_offset ? state->bs_tim_offset + 4 : 0,
+		AR5K_BEACON_TIM) | AR5K_REG_SM(state->bs_interval,
+		AR5K_BEACON_PERIOD), AR5K_BEACON);
+
+	/*
+	 * Write new beacon miss threshold, if it appears to be valid
+	 * XXX: Figure out right values for min <= bs_bmiss_threshold <= max
+	 * and return if its not in range. We can test this by reading value and
+	 * setting value to a largest value and seeing which values register.
+	 */
+
+	AR5K_REG_WRITE_BITS(ah, AR5K_RSSI_THR, AR5K_RSSI_THR_BMISS,
+			state->bs_bmiss_threshold);
+
+	/*
+	 * Set sleep control register
+	 * XXX: Didn't find this in 5210 code but since this register
+	 * exists also in ar5k's 5210 headers i leave it as common code.
+	 */
+	AR5K_REG_WRITE_BITS(ah, AR5K_SLEEP_CTL, AR5K_SLEEP_CTL_SLDUR,
+			(state->bs_sleep_duration - 3) << 3);
+
+	/*
+	 * Set enhanced sleep registers on 5212
+	 */
+	if (ah->ah_version == AR5K_AR5212) {
+		if (state->bs_sleep_duration > state->bs_interval &&
+				roundup(state->bs_sleep_duration, interval) ==
+				state->bs_sleep_duration)
+			interval = state->bs_sleep_duration;
+
+		if (state->bs_sleep_duration > dtim && (dtim == 0 ||
+				roundup(state->bs_sleep_duration, dtim) ==
+				state->bs_sleep_duration))
+			dtim = state->bs_sleep_duration;
+
+		if (interval > dtim)
+			return -EINVAL;
+
+		next_beacon = interval == dtim ? state->bs_next_dtim :
+			state->bs_next_beacon;
+
+		ath5k_hw_reg_write(ah,
+			AR5K_REG_SM((state->bs_next_dtim - 3) << 3,
+			AR5K_SLEEP0_NEXT_DTIM) |
+			AR5K_REG_SM(10, AR5K_SLEEP0_CABTO) |
+			AR5K_SLEEP0_ENH_SLEEP_EN |
+			AR5K_SLEEP0_ASSUME_DTIM, AR5K_SLEEP0);
+
+		ath5k_hw_reg_write(ah, AR5K_REG_SM((next_beacon - 3) << 3,
+			AR5K_SLEEP1_NEXT_TIM) |
+			AR5K_REG_SM(10, AR5K_SLEEP1_BEACON_TO), AR5K_SLEEP1);
+
+		ath5k_hw_reg_write(ah,
+			AR5K_REG_SM(interval, AR5K_SLEEP2_TIM_PER) |
+			AR5K_REG_SM(dtim, AR5K_SLEEP2_DTIM_PER), AR5K_SLEEP2);
+	}
+
+	return 0;
+}
+
+/*
+ * Reset beacon timers
+ */
+void ath5k_hw_reset_beacon(struct ath5k_hw *ah)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	/*
+	 * Disable beacon timer
+	 */
+	ath5k_hw_reg_write(ah, 0, AR5K_TIMER0);
+
+	/*
+	 * Disable some beacon register values
+	 */
+	AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
+			AR5K_STA_ID1_DEFAULT_ANTENNA | AR5K_STA_ID1_PCF);
+	ath5k_hw_reg_write(ah, AR5K_BEACON_PERIOD, AR5K_BEACON);
+}
+
+/*
+ * Wait for beacon queue to finish
+ */
+int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr)
+{
+	unsigned int i;
+	int ret;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	/* 5210 doesn't have QCU*/
+	if (ah->ah_version == AR5K_AR5210) {
+		/*
+		 * Wait for beaconn queue to finish by checking
+		 * Control Register and Beacon Status Register.
+		 */
+		for (i = AR5K_TUNE_BEACON_INTERVAL / 2; i > 0; i--) {
+			if (!(ath5k_hw_reg_read(ah, AR5K_BSR) & AR5K_BSR_TXQ1F)
+					||
+			    !(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_BSR_TXQ1F))
+				break;
+			udelay(10);
+		}
+
+		/* Timeout... */
+		if (i <= 0) {
+			/*
+			 * Re-schedule the beacon queue
+			 */
+			ath5k_hw_reg_write(ah, phys_addr, AR5K_NOQCU_TXDP1);
+			ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE,
+					AR5K_BCR);
+
+			return -EIO;
+		}
+		ret = 0;
+	} else {
+	/*5211/5212*/
+		ret = ath5k_hw_register_timeout(ah,
+			AR5K_QUEUE_STATUS(AR5K_TX_QUEUE_ID_BEACON),
+			AR5K_QCU_STS_FRMPENDCNT, 0, false);
+
+		if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, AR5K_TX_QUEUE_ID_BEACON))
+			return -EIO;
+	}
+
+	return ret;
+}
+#endif
+
+
+/*********************\
+* Key table functions *
+\*********************/
+
+/*
+ * Reset a key entry on the table
+ */
+int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry)
+{
+	unsigned int i;
+
+	ATH5K_TRACE(ah->ah_sc);
+	AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
+
+	for (i = 0; i < AR5K_KEYCACHE_SIZE; i++)
+		ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(entry, i));
+
+	/*
+	 * Set NULL encryption on AR5212+
+	 *
+	 * Note: AR5K_KEYTABLE_TYPE -> AR5K_KEYTABLE_OFF(entry, 5)
+	 *       AR5K_KEYTABLE_TYPE_NULL -> 0x00000007
+	 *
+	 * Note2: Windows driver (ndiswrapper) sets this to
+	 *        0x00000714 instead of 0x00000007
+	 */
+	if (ah->ah_version > AR5K_AR5211)
+		ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL,
+				AR5K_KEYTABLE_TYPE(entry));
+
+	return 0;
+}
+
+/*
+ * Check if a table entry is valid
+ */
+int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
+
+	/* Check the validation flag at the end of the entry */
+	return ath5k_hw_reg_read(ah, AR5K_KEYTABLE_MAC1(entry)) &
+		AR5K_KEYTABLE_VALID;
+}
+
+/*
+ * Set a key entry on the table
+ */
+int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry,
+		const struct ieee80211_key_conf *key, const u8 *mac)
+{
+	unsigned int i;
+	__le32 key_v[5] = {};
+	u32 keytype;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	/* key->keylen comes in from mac80211 in bytes */
+
+	if (key->keylen > AR5K_KEYTABLE_SIZE / 8)
+		return -EOPNOTSUPP;
+
+	switch (key->keylen) {
+	/* WEP 40-bit   = 40-bit  entered key + 24 bit IV = 64-bit */
+	case 40 / 8:
+		memcpy(&key_v[0], key->key, 5);
+		keytype = AR5K_KEYTABLE_TYPE_40;
+		break;
+
+	/* WEP 104-bit  = 104-bit entered key + 24-bit IV = 128-bit */
+	case 104 / 8:
+		memcpy(&key_v[0], &key->key[0], 6);
+		memcpy(&key_v[2], &key->key[6], 6);
+		memcpy(&key_v[4], &key->key[12], 1);
+		keytype = AR5K_KEYTABLE_TYPE_104;
+		break;
+	/* WEP 128-bit  = 128-bit entered key + 24 bit IV = 152-bit */
+	case 128 / 8:
+		memcpy(&key_v[0], &key->key[0], 6);
+		memcpy(&key_v[2], &key->key[6], 6);
+		memcpy(&key_v[4], &key->key[12], 4);
+		keytype = AR5K_KEYTABLE_TYPE_128;
+		break;
+
+	default:
+		return -EINVAL; /* shouldn't happen */
+	}
+
+	for (i = 0; i < ARRAY_SIZE(key_v); i++)
+		ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]),
+				AR5K_KEYTABLE_OFF(entry, i));
+
+	ath5k_hw_reg_write(ah, keytype, AR5K_KEYTABLE_TYPE(entry));
+
+	return ath5k_hw_set_key_lladdr(ah, entry, mac);
+}
+
+int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac)
+{
+	u32 low_id, high_id;
+
+	ATH5K_TRACE(ah->ah_sc);
+	 /* Invalid entry (key table overflow) */
+	AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
+
+	/* MAC may be NULL if it's a broadcast key. In this case no need to
+	 * to compute AR5K_LOW_ID and AR5K_HIGH_ID as we already know it. */
+	if (unlikely(mac == NULL)) {
+		low_id = 0xffffffff;
+		high_id = 0xffff | AR5K_KEYTABLE_VALID;
+	} else {
+		low_id = AR5K_LOW_ID(mac);
+		high_id = AR5K_HIGH_ID(mac) | AR5K_KEYTABLE_VALID;
+	}
+
+	ath5k_hw_reg_write(ah, low_id, AR5K_KEYTABLE_MAC0(entry));
+	ath5k_hw_reg_write(ah, high_id, AR5K_KEYTABLE_MAC1(entry));
+
+	return 0;
+}
+
diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c
index fa0d47faf57..e43f6563e61 100644
--- a/drivers/net/wireless/ath5k/phy.c
+++ b/drivers/net/wireless/ath5k/phy.c
@@ -1,9 +1,9 @@
 /*
  * PHY functions
  *
- * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org>
- * Copyright (c) 2006, 2007 Nick Kossifidis <mickflemm@gmail.com>
- * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
  *
  * Permission to use, copy, modify, and distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -19,6 +19,8 @@
  *
  */
 
+#define _ATH5K_PHY
+
 #include <linux/delay.h>
 
 #include "ath5k.h"
@@ -2122,7 +2124,7 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah,
 	beacon = ath5k_hw_reg_read(ah, AR5K_BEACON_5210);
 	ath5k_hw_reg_write(ah, beacon & ~AR5K_BEACON_ENABLE, AR5K_BEACON_5210);
 
-	udelay(2300);
+	mdelay(2);
 
 	/*
 	 * Set the channel (with AGC turned off)
@@ -2501,3 +2503,5 @@ int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power)
 
 	return ath5k_hw_txpower(ah, channel, power);
 }
+
+#undef _ATH5K_PHY
diff --git a/drivers/net/wireless/ath5k/qcu.c b/drivers/net/wireless/ath5k/qcu.c
new file mode 100644
index 00000000000..01bf09176d2
--- /dev/null
+++ b/drivers/net/wireless/ath5k/qcu.c
@@ -0,0 +1,488 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/********************************************\
+Queue Control Unit, DFS Control Unit Functions
+\********************************************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*
+ * Get properties for a transmit queue
+ */
+int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue,
+		struct ath5k_txq_info *queue_info)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info));
+	return 0;
+}
+
+/*
+ * Set properties for a transmit queue
+ */
+int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue,
+				const struct ath5k_txq_info *queue_info)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+	if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
+		return -EIO;
+
+	memcpy(&ah->ah_txq[queue], queue_info, sizeof(struct ath5k_txq_info));
+
+	/*XXX: Is this supported on 5210 ?*/
+	if ((queue_info->tqi_type == AR5K_TX_QUEUE_DATA &&
+			((queue_info->tqi_subtype == AR5K_WME_AC_VI) ||
+			(queue_info->tqi_subtype == AR5K_WME_AC_VO))) ||
+			queue_info->tqi_type == AR5K_TX_QUEUE_UAPSD)
+		ah->ah_txq[queue].tqi_flags |= AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS;
+
+	return 0;
+}
+
+/*
+ * Initialize a transmit queue
+ */
+int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type,
+		struct ath5k_txq_info *queue_info)
+{
+	unsigned int queue;
+	int ret;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	/*
+	 * Get queue by type
+	 */
+	/*5210 only has 2 queues*/
+	if (ah->ah_version == AR5K_AR5210) {
+		switch (queue_type) {
+		case AR5K_TX_QUEUE_DATA:
+			queue = AR5K_TX_QUEUE_ID_NOQCU_DATA;
+			break;
+		case AR5K_TX_QUEUE_BEACON:
+		case AR5K_TX_QUEUE_CAB:
+			queue = AR5K_TX_QUEUE_ID_NOQCU_BEACON;
+			break;
+		default:
+			return -EINVAL;
+		}
+	} else {
+		switch (queue_type) {
+		case AR5K_TX_QUEUE_DATA:
+			for (queue = AR5K_TX_QUEUE_ID_DATA_MIN;
+				ah->ah_txq[queue].tqi_type !=
+				AR5K_TX_QUEUE_INACTIVE; queue++) {
+
+				if (queue > AR5K_TX_QUEUE_ID_DATA_MAX)
+					return -EINVAL;
+			}
+			break;
+		case AR5K_TX_QUEUE_UAPSD:
+			queue = AR5K_TX_QUEUE_ID_UAPSD;
+			break;
+		case AR5K_TX_QUEUE_BEACON:
+			queue = AR5K_TX_QUEUE_ID_BEACON;
+			break;
+		case AR5K_TX_QUEUE_CAB:
+			queue = AR5K_TX_QUEUE_ID_CAB;
+			break;
+		case AR5K_TX_QUEUE_XR_DATA:
+			if (ah->ah_version != AR5K_AR5212)
+				ATH5K_ERR(ah->ah_sc,
+					"XR data queues only supported in"
+					" 5212!\n");
+			queue = AR5K_TX_QUEUE_ID_XR_DATA;
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	/*
+	 * Setup internal queue structure
+	 */
+	memset(&ah->ah_txq[queue], 0, sizeof(struct ath5k_txq_info));
+	ah->ah_txq[queue].tqi_type = queue_type;
+
+	if (queue_info != NULL) {
+		queue_info->tqi_type = queue_type;
+		ret = ath5k_hw_set_tx_queueprops(ah, queue, queue_info);
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * We use ah_txq_status to hold a temp value for
+	 * the Secondary interrupt mask registers on 5211+
+	 * check out ath5k_hw_reset_tx_queue
+	 */
+	AR5K_Q_ENABLE_BITS(ah->ah_txq_status, queue);
+
+	return queue;
+}
+
+/*
+ * Get number of pending frames
+ * for a specific queue [5211+]
+ */
+u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+	/* Return if queue is declared inactive */
+	if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
+		return false;
+
+	/* XXX: How about AR5K_CFG_TXCNT ? */
+	if (ah->ah_version == AR5K_AR5210)
+		return false;
+
+	return AR5K_QUEUE_STATUS(queue) & AR5K_QCU_STS_FRMPENDCNT;
+}
+
+/*
+ * Set a transmit queue inactive
+ */
+void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num))
+		return;
+
+	/* This queue will be skipped in further operations */
+	ah->ah_txq[queue].tqi_type = AR5K_TX_QUEUE_INACTIVE;
+	/*For SIMR setup*/
+	AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue);
+}
+
+/*
+ * Set DFS properties for a transmit queue on DCU
+ */
+int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
+{
+	u32 cw_min, cw_max, retry_lg, retry_sh;
+	struct ath5k_txq_info *tq = &ah->ah_txq[queue];
+
+	ATH5K_TRACE(ah->ah_sc);
+	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+	tq = &ah->ah_txq[queue];
+
+	if (tq->tqi_type == AR5K_TX_QUEUE_INACTIVE)
+		return 0;
+
+	if (ah->ah_version == AR5K_AR5210) {
+		/* Only handle data queues, others will be ignored */
+		if (tq->tqi_type != AR5K_TX_QUEUE_DATA)
+			return 0;
+
+		/* Set Slot time */
+		ath5k_hw_reg_write(ah, ah->ah_turbo ?
+			AR5K_INIT_SLOT_TIME_TURBO : AR5K_INIT_SLOT_TIME,
+			AR5K_SLOT_TIME);
+		/* Set ACK_CTS timeout */
+		ath5k_hw_reg_write(ah, ah->ah_turbo ?
+			AR5K_INIT_ACK_CTS_TIMEOUT_TURBO :
+			AR5K_INIT_ACK_CTS_TIMEOUT, AR5K_SLOT_TIME);
+		/* Set Transmit Latency */
+		ath5k_hw_reg_write(ah, ah->ah_turbo ?
+			AR5K_INIT_TRANSMIT_LATENCY_TURBO :
+			AR5K_INIT_TRANSMIT_LATENCY, AR5K_USEC_5210);
+
+		/* Set IFS0 */
+		if (ah->ah_turbo) {
+			 ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS_TURBO +
+				(ah->ah_aifs + tq->tqi_aifs) *
+				AR5K_INIT_SLOT_TIME_TURBO) <<
+				AR5K_IFS0_DIFS_S) | AR5K_INIT_SIFS_TURBO,
+				AR5K_IFS0);
+		} else {
+			ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS +
+				(ah->ah_aifs + tq->tqi_aifs) *
+				AR5K_INIT_SLOT_TIME) << AR5K_IFS0_DIFS_S) |
+				AR5K_INIT_SIFS, AR5K_IFS0);
+		}
+
+		/* Set IFS1 */
+		ath5k_hw_reg_write(ah, ah->ah_turbo ?
+			AR5K_INIT_PROTO_TIME_CNTRL_TURBO :
+			AR5K_INIT_PROTO_TIME_CNTRL, AR5K_IFS1);
+		/* Set AR5K_PHY_SETTLING */
+		ath5k_hw_reg_write(ah, ah->ah_turbo ?
+			(ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F)
+			| 0x38 :
+			(ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F)
+			| 0x1C,
+			AR5K_PHY_SETTLING);
+		/* Set Frame Control Register */
+		ath5k_hw_reg_write(ah, ah->ah_turbo ?
+			(AR5K_PHY_FRAME_CTL_INI | AR5K_PHY_TURBO_MODE |
+			AR5K_PHY_TURBO_SHORT | 0x2020) :
+			(AR5K_PHY_FRAME_CTL_INI | 0x1020),
+			AR5K_PHY_FRAME_CTL_5210);
+	}
+
+	/*
+	 * Calculate cwmin/max by channel mode
+	 */
+	cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN;
+	cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX;
+	ah->ah_aifs = AR5K_TUNE_AIFS;
+	/*XR is only supported on 5212*/
+	if (IS_CHAN_XR(ah->ah_current_channel) &&
+			ah->ah_version == AR5K_AR5212) {
+		cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_XR;
+		cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_XR;
+		ah->ah_aifs = AR5K_TUNE_AIFS_XR;
+	/*B mode is not supported on 5210*/
+	} else if (IS_CHAN_B(ah->ah_current_channel) &&
+			ah->ah_version != AR5K_AR5210) {
+		cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_11B;
+		cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_11B;
+		ah->ah_aifs = AR5K_TUNE_AIFS_11B;
+	}
+
+	cw_min = 1;
+	while (cw_min < ah->ah_cw_min)
+		cw_min = (cw_min << 1) | 1;
+
+	cw_min = tq->tqi_cw_min < 0 ? (cw_min >> (-tq->tqi_cw_min)) :
+		((cw_min << tq->tqi_cw_min) + (1 << tq->tqi_cw_min) - 1);
+	cw_max = tq->tqi_cw_max < 0 ? (cw_max >> (-tq->tqi_cw_max)) :
+		((cw_max << tq->tqi_cw_max) + (1 << tq->tqi_cw_max) - 1);
+
+	/*
+	 * Calculate and set retry limits
+	 */
+	if (ah->ah_software_retry) {
+		/* XXX Need to test this */
+		retry_lg = ah->ah_limit_tx_retries;
+		retry_sh = retry_lg = retry_lg > AR5K_DCU_RETRY_LMT_SH_RETRY ?
+			AR5K_DCU_RETRY_LMT_SH_RETRY : retry_lg;
+	} else {
+		retry_lg = AR5K_INIT_LG_RETRY;
+		retry_sh = AR5K_INIT_SH_RETRY;
+	}
+
+	/*No QCU/DCU [5210]*/
+	if (ah->ah_version == AR5K_AR5210) {
+		ath5k_hw_reg_write(ah,
+			(cw_min << AR5K_NODCU_RETRY_LMT_CW_MIN_S)
+			| AR5K_REG_SM(AR5K_INIT_SLG_RETRY,
+				AR5K_NODCU_RETRY_LMT_SLG_RETRY)
+			| AR5K_REG_SM(AR5K_INIT_SSH_RETRY,
+				AR5K_NODCU_RETRY_LMT_SSH_RETRY)
+			| AR5K_REG_SM(retry_lg, AR5K_NODCU_RETRY_LMT_LG_RETRY)
+			| AR5K_REG_SM(retry_sh, AR5K_NODCU_RETRY_LMT_SH_RETRY),
+			AR5K_NODCU_RETRY_LMT);
+	} else {
+		/*QCU/DCU [5211+]*/
+		ath5k_hw_reg_write(ah,
+			AR5K_REG_SM(AR5K_INIT_SLG_RETRY,
+				AR5K_DCU_RETRY_LMT_SLG_RETRY) |
+			AR5K_REG_SM(AR5K_INIT_SSH_RETRY,
+				AR5K_DCU_RETRY_LMT_SSH_RETRY) |
+			AR5K_REG_SM(retry_lg, AR5K_DCU_RETRY_LMT_LG_RETRY) |
+			AR5K_REG_SM(retry_sh, AR5K_DCU_RETRY_LMT_SH_RETRY),
+			AR5K_QUEUE_DFS_RETRY_LIMIT(queue));
+
+	/*===Rest is also for QCU/DCU only [5211+]===*/
+
+		/*
+		 * Set initial content window (cw_min/cw_max)
+		 * and arbitrated interframe space (aifs)...
+		 */
+		ath5k_hw_reg_write(ah,
+			AR5K_REG_SM(cw_min, AR5K_DCU_LCL_IFS_CW_MIN) |
+			AR5K_REG_SM(cw_max, AR5K_DCU_LCL_IFS_CW_MAX) |
+			AR5K_REG_SM(ah->ah_aifs + tq->tqi_aifs,
+				AR5K_DCU_LCL_IFS_AIFS),
+			AR5K_QUEUE_DFS_LOCAL_IFS(queue));
+
+		/*
+		 * Set misc registers
+		 */
+		ath5k_hw_reg_write(ah, AR5K_QCU_MISC_DCU_EARLY,
+			AR5K_QUEUE_MISC(queue));
+
+		if (tq->tqi_cbr_period) {
+			ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_cbr_period,
+				AR5K_QCU_CBRCFG_INTVAL) |
+				AR5K_REG_SM(tq->tqi_cbr_overflow_limit,
+				AR5K_QCU_CBRCFG_ORN_THRES),
+				AR5K_QUEUE_CBRCFG(queue));
+			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+				AR5K_QCU_MISC_FRSHED_CBR);
+			if (tq->tqi_cbr_overflow_limit)
+				AR5K_REG_ENABLE_BITS(ah,
+					AR5K_QUEUE_MISC(queue),
+					AR5K_QCU_MISC_CBR_THRES_ENABLE);
+		}
+
+		if (tq->tqi_ready_time)
+			ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time,
+				AR5K_QCU_RDYTIMECFG_INTVAL) |
+				AR5K_QCU_RDYTIMECFG_ENABLE,
+				AR5K_QUEUE_RDYTIMECFG(queue));
+
+		if (tq->tqi_burst_time) {
+			ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_burst_time,
+				AR5K_DCU_CHAN_TIME_DUR) |
+				AR5K_DCU_CHAN_TIME_ENABLE,
+				AR5K_QUEUE_DFS_CHANNEL_TIME(queue));
+
+			if (tq->tqi_flags
+			& AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE)
+				AR5K_REG_ENABLE_BITS(ah,
+					AR5K_QUEUE_MISC(queue),
+					AR5K_QCU_MISC_RDY_VEOL_POLICY);
+		}
+
+		if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE)
+			ath5k_hw_reg_write(ah, AR5K_DCU_MISC_POST_FR_BKOFF_DIS,
+				AR5K_QUEUE_DFS_MISC(queue));
+
+		if (tq->tqi_flags & AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE)
+			ath5k_hw_reg_write(ah, AR5K_DCU_MISC_BACKOFF_FRAG,
+				AR5K_QUEUE_DFS_MISC(queue));
+
+		/*
+		 * Set registers by queue type
+		 */
+		switch (tq->tqi_type) {
+		case AR5K_TX_QUEUE_BEACON:
+			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+				AR5K_QCU_MISC_FRSHED_DBA_GT |
+				AR5K_QCU_MISC_CBREXP_BCN_DIS |
+				AR5K_QCU_MISC_BCN_ENABLE);
+
+			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
+				(AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
+				AR5K_DCU_MISC_ARBLOCK_CTL_S) |
+				AR5K_DCU_MISC_POST_FR_BKOFF_DIS |
+				AR5K_DCU_MISC_BCN_ENABLE);
+
+			ath5k_hw_reg_write(ah, ((AR5K_TUNE_BEACON_INTERVAL -
+				(AR5K_TUNE_SW_BEACON_RESP -
+				AR5K_TUNE_DMA_BEACON_RESP) -
+				AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF) * 1024) |
+				AR5K_QCU_RDYTIMECFG_ENABLE,
+				AR5K_QUEUE_RDYTIMECFG(queue));
+			break;
+
+		case AR5K_TX_QUEUE_CAB:
+			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+				AR5K_QCU_MISC_FRSHED_DBA_GT |
+				AR5K_QCU_MISC_CBREXP_DIS |
+				AR5K_QCU_MISC_CBREXP_BCN_DIS);
+
+			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
+				(AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
+				AR5K_DCU_MISC_ARBLOCK_CTL_S));
+			break;
+
+		case AR5K_TX_QUEUE_UAPSD:
+			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+				AR5K_QCU_MISC_CBREXP_DIS);
+			break;
+
+		case AR5K_TX_QUEUE_DATA:
+		default:
+			break;
+		}
+
+		/*
+		 * Enable interrupts for this tx queue
+		 * in the secondary interrupt mask registers
+		 */
+		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXOKINT_ENABLE)
+			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txok, queue);
+
+		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXERRINT_ENABLE)
+			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txerr, queue);
+
+		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXURNINT_ENABLE)
+			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txurn, queue);
+
+		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXDESCINT_ENABLE)
+			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txdesc, queue);
+
+		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXEOLINT_ENABLE)
+			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txeol, queue);
+
+
+		/* Update secondary interrupt mask registers */
+		ah->ah_txq_imr_txok &= ah->ah_txq_status;
+		ah->ah_txq_imr_txerr &= ah->ah_txq_status;
+		ah->ah_txq_imr_txurn &= ah->ah_txq_status;
+		ah->ah_txq_imr_txdesc &= ah->ah_txq_status;
+		ah->ah_txq_imr_txeol &= ah->ah_txq_status;
+
+		ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txok,
+			AR5K_SIMR0_QCU_TXOK) |
+			AR5K_REG_SM(ah->ah_txq_imr_txdesc,
+			AR5K_SIMR0_QCU_TXDESC), AR5K_SIMR0);
+		ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txerr,
+			AR5K_SIMR1_QCU_TXERR) |
+			AR5K_REG_SM(ah->ah_txq_imr_txeol,
+			AR5K_SIMR1_QCU_TXEOL), AR5K_SIMR1);
+		ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txurn,
+			AR5K_SIMR2_QCU_TXURN), AR5K_SIMR2);
+	}
+
+	return 0;
+}
+
+/*
+ * Get slot time from DCU
+ */
+unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	if (ah->ah_version == AR5K_AR5210)
+		return ath5k_hw_clocktoh(ath5k_hw_reg_read(ah,
+				AR5K_SLOT_TIME) & 0xffff, ah->ah_turbo);
+	else
+		return ath5k_hw_reg_read(ah, AR5K_DCU_GBL_IFS_SLOT) & 0xffff;
+}
+
+/*
+ * Set slot time on DCU
+ */
+int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	if (slot_time < AR5K_SLOT_TIME_9 || slot_time > AR5K_SLOT_TIME_MAX)
+		return -EINVAL;
+
+	if (ah->ah_version == AR5K_AR5210)
+		ath5k_hw_reg_write(ah, ath5k_hw_htoclock(slot_time,
+				ah->ah_turbo), AR5K_SLOT_TIME);
+	else
+		ath5k_hw_reg_write(ah, slot_time, AR5K_DCU_GBL_IFS_SLOT);
+
+	return 0;
+}
+
diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath5k/reg.h
index 7562bf173d3..e557fe178bb 100644
--- a/drivers/net/wireless/ath5k/reg.h
+++ b/drivers/net/wireless/ath5k/reg.h
@@ -1,7 +1,7 @@
 /*
- * Copyright (c) 2007 Nick Kossifidis <mickflemm@gmail.com>
- * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org>
- * Copyright (c) 2007 Michael Taylor <mike.taylor@apprion.com>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2007-2008 Michael Taylor <mike.taylor@apprion.com>
  *
  * Permission to use, copy, modify, and distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -29,6 +29,10 @@
  *        http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf
  *
  * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf
+ *
+ * This file also contains register values found on a memory dump of
+ * Atheros's ART program (Atheros Radio Test), on ath9k, on legacy-hal
+ * released by Atheros and on various debug messages found on the net.
  */
 
 
@@ -295,7 +299,7 @@
 #define AR5K_ISR_RXPHY		0x00004000	/* PHY error */
 #define AR5K_ISR_RXKCM		0x00008000	/* RX Key cache miss */
 #define AR5K_ISR_SWBA		0x00010000	/* Software beacon alert */
-#define AR5K_ISR_BRSSI		0x00020000
+#define AR5K_ISR_BRSSI		0x00020000	/* Beacon rssi below threshold (?) */
 #define AR5K_ISR_BMISS		0x00040000	/* Beacon missed */
 #define AR5K_ISR_HIUERR		0x00080000	/* Host Interface Unit error [5211+] */
 #define AR5K_ISR_BNR		0x00100000 	/* Beacon not ready [5211+] */
@@ -303,46 +307,56 @@
 #define AR5K_ISR_RXCHIRP	0x00200000	/* CHIRP Received [5212+] */
 #define AR5K_ISR_SSERR		0x00200000	/* Signaled System Error [5210] */
 #define AR5K_ISR_DPERR		0x00400000	/* Det par Error (?) [5210] */
-#define AR5K_ISR_TIM		0x00800000	/* [5210] */
-#define AR5K_ISR_BCNMISC	0x00800000	/* [5212+] */
-#define AR5K_ISR_GPIO		0x01000000	/* GPIO (rf kill)*/
-#define AR5K_ISR_QCBRORN	0x02000000	/* CBR overrun (?)  [5211+] */
-#define AR5K_ISR_QCBRURN	0x04000000	/* CBR underrun (?) [5211+] */
-#define AR5K_ISR_QTRIG		0x08000000	/* [5211+] */
+#define AR5K_ISR_RXDOPPLER	0x00400000	/* Doppler chirp received [5212+] */
+#define AR5K_ISR_TIM		0x00800000	/* [5211+] */
+#define AR5K_ISR_BCNMISC	0x00800000	/* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
+						CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
+#define AR5K_ISR_GPIO		0x01000000	/* GPIO (rf kill) */
+#define AR5K_ISR_QCBRORN	0x02000000	/* QCU CBR overrun [5211+] */
+#define AR5K_ISR_QCBRURN	0x04000000	/* QCU CBR underrun [5211+] */
+#define AR5K_ISR_QTRIG		0x08000000	/* QCU scheduling trigger [5211+] */
 
 /*
  * Secondary status registers [5211+] (0 - 4)
  *
- * I guess from the names that these give the status for each
- * queue, that's why only masks are defined here, haven't got
- * any info about them (couldn't find them anywhere in ar5k code).
+ * These give the status for each QCU, only QCUs 0-9 are
+ * represented.
  */
 #define AR5K_SISR0		0x0084			/* Register Address [5211+] */
 #define AR5K_SISR0_QCU_TXOK	0x000003ff	/* Mask for QCU_TXOK */
+#define AR5K_SISR0_QCU_TXOK_S	0
 #define AR5K_SISR0_QCU_TXDESC	0x03ff0000	/* Mask for QCU_TXDESC */
+#define AR5K_SISR0_QCU_TXDESC_S	16
 
 #define AR5K_SISR1		0x0088			/* Register Address [5211+] */
 #define AR5K_SISR1_QCU_TXERR	0x000003ff	/* Mask for QCU_TXERR */
+#define AR5K_SISR1_QCU_TXERR_S	0
 #define AR5K_SISR1_QCU_TXEOL	0x03ff0000	/* Mask for QCU_TXEOL */
+#define AR5K_SISR1_QCU_TXEOL_S	16
 
 #define AR5K_SISR2		0x008c			/* Register Address [5211+] */
 #define AR5K_SISR2_QCU_TXURN	0x000003ff	/* Mask for QCU_TXURN */
+#define	AR5K_SISR2_QCU_TXURN_S	0
 #define	AR5K_SISR2_MCABT	0x00100000	/* Master Cycle Abort */
 #define	AR5K_SISR2_SSERR	0x00200000	/* Signaled System Error */
-#define	AR5K_SISR2_DPERR	0x00400000	/* Det par Error (?) */
+#define	AR5K_SISR2_DPERR	0x00400000	/* Bus parity error */
 #define	AR5K_SISR2_TIM		0x01000000	/* [5212+] */
 #define	AR5K_SISR2_CAB_END	0x02000000	/* [5212+] */
 #define	AR5K_SISR2_DTIM_SYNC	0x04000000	/* DTIM sync lost [5212+] */
 #define	AR5K_SISR2_BCN_TIMEOUT	0x08000000	/* Beacon Timeout [5212+] */
 #define	AR5K_SISR2_CAB_TIMEOUT	0x10000000	/* CAB Timeout [5212+] */
 #define	AR5K_SISR2_DTIM		0x20000000	/* [5212+] */
+#define	AR5K_SISR2_TSFOOR	0x80000000	/* TSF OOR (?) */
 
 #define AR5K_SISR3		0x0090			/* Register Address [5211+] */
 #define AR5K_SISR3_QCBRORN	0x000003ff	/* Mask for QCBRORN */
+#define AR5K_SISR3_QCBORN_S	0
 #define AR5K_SISR3_QCBRURN	0x03ff0000	/* Mask for QCBRURN */
+#define AR5K_SISR3_QCBRURN_S	16
 
 #define AR5K_SISR4		0x0094			/* Register Address [5211+] */
 #define AR5K_SISR4_QTRIG	0x000003ff	/* Mask for QTRIG */
+#define AR5K_SISR4_QTRIG_S	0
 
 /*
  * Shadow read-and-clear interrupt status registers [5211+]
@@ -379,7 +393,7 @@
 #define AR5K_IMR_RXPHY		0x00004000	/* PHY error*/
 #define AR5K_IMR_RXKCM		0x00008000	/* RX Key cache miss */
 #define AR5K_IMR_SWBA		0x00010000	/* Software beacon alert*/
-#define AR5K_IMR_BRSSI		0x00020000
+#define AR5K_IMR_BRSSI		0x00020000	/* Beacon rssi below threshold (?) */
 #define AR5K_IMR_BMISS		0x00040000	/* Beacon missed*/
 #define AR5K_IMR_HIUERR		0x00080000	/* Host Interface Unit error [5211+] */
 #define AR5K_IMR_BNR		0x00100000 	/* Beacon not ready [5211+] */
@@ -387,12 +401,14 @@
 #define AR5K_IMR_RXCHIRP	0x00200000	/* CHIRP Received [5212+]*/
 #define AR5K_IMR_SSERR		0x00200000	/* Signaled System Error [5210] */
 #define AR5K_IMR_DPERR		0x00400000	/* Det par Error (?) [5210] */
+#define AR5K_IMR_RXDOPPLER	0x00400000	/* Doppler chirp received [5212+] */
 #define AR5K_IMR_TIM		0x00800000	/* [5211+] */
-#define AR5K_IMR_BCNMISC	0x00800000	/* [5212+] */
+#define AR5K_IMR_BCNMISC	0x00800000	/* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
+						CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
 #define AR5K_IMR_GPIO		0x01000000	/* GPIO (rf kill)*/
-#define AR5K_IMR_QCBRORN	0x02000000	/* CBR overrun (?) [5211+] */
-#define AR5K_IMR_QCBRURN	0x04000000	/* CBR underrun (?) [5211+] */
-#define AR5K_IMR_QTRIG		0x08000000	/* [5211+] */
+#define AR5K_IMR_QCBRORN	0x02000000	/* QCU CBR overrun (?) [5211+] */
+#define AR5K_IMR_QCBRURN	0x04000000	/* QCU CBR underrun (?) [5211+] */
+#define AR5K_IMR_QTRIG		0x08000000	/* QCU scheduling trigger [5211+] */
 
 /*
  * Secondary interrupt mask registers [5211+] (0 - 4)
@@ -414,13 +430,14 @@
 #define AR5K_SIMR2_QCU_TXURN_S	0
 #define	AR5K_SIMR2_MCABT	0x00100000	/* Master Cycle Abort */
 #define	AR5K_SIMR2_SSERR	0x00200000	/* Signaled System Error */
-#define	AR5K_SIMR2_DPERR	0x00400000	/* Det par Error (?) */
+#define	AR5K_SIMR2_DPERR	0x00400000	/* Bus parity error */
 #define	AR5K_SIMR2_TIM		0x01000000	/* [5212+] */
 #define	AR5K_SIMR2_CAB_END	0x02000000	/* [5212+] */
 #define	AR5K_SIMR2_DTIM_SYNC	0x04000000	/* DTIM Sync lost [5212+] */
 #define	AR5K_SIMR2_BCN_TIMEOUT	0x08000000	/* Beacon Timeout [5212+] */
 #define	AR5K_SIMR2_CAB_TIMEOUT	0x10000000	/* CAB Timeout [5212+] */
 #define	AR5K_SIMR2_DTIM		0x20000000	/* [5212+] */
+#define	AR5K_SIMR2_TSFOOR	0x80000000	/* TSF OOR (?) */
 
 #define AR5K_SIMR3		0x00b0			/* Register Address [5211+] */
 #define AR5K_SIMR3_QCBRORN	0x000003ff	/* Mask for QCBRORN */
@@ -586,15 +603,15 @@
 #define	AR5K_QCU_MISC_FRSHED_M		0x0000000f	/* Frame sheduling mask */
 #define	AR5K_QCU_MISC_FRSHED_ASAP		0	/* ASAP */
 #define	AR5K_QCU_MISC_FRSHED_CBR		1	/* Constant Bit Rate */
-#define	AR5K_QCU_MISC_FRSHED_DBA_GT		2	/* DMA Beacon alert gated (?) */
-#define	AR5K_QCU_MISC_FRSHED_TIM_GT		3	/* Time gated (?) */
-#define	AR5K_QCU_MISC_FRSHED_BCN_SENT_GT	4	/* Beacon sent gated (?) */
+#define	AR5K_QCU_MISC_FRSHED_DBA_GT		2	/* DMA Beacon alert gated */
+#define	AR5K_QCU_MISC_FRSHED_TIM_GT		3	/* TIMT gated */
+#define	AR5K_QCU_MISC_FRSHED_BCN_SENT_GT	4	/* Beacon sent gated */
 #define	AR5K_QCU_MISC_ONESHOT_ENABLE	0x00000010	/* Oneshot enable */
-#define	AR5K_QCU_MISC_CBREXP		0x00000020	/* CBR expired (normal queue) */
-#define	AR5K_QCU_MISC_CBREXP_BCN	0x00000040	/* CBR expired (beacon queue) */
+#define	AR5K_QCU_MISC_CBREXP_DIS	0x00000020	/* Disable CBR expired counter (normal queue) */
+#define	AR5K_QCU_MISC_CBREXP_BCN_DIS	0x00000040	/* Disable CBR expired counter (beacon queue) */
 #define	AR5K_QCU_MISC_BCN_ENABLE	0x00000080	/* Enable Beacon use */
-#define	AR5K_QCU_MISC_CBR_THRES_ENABLE	0x00000100	/* CBR threshold enabled */
-#define	AR5K_QCU_MISC_RDY_VEOL_POLICY	0x00000200	/* TXE reset when RDYTIME enalbed */
+#define	AR5K_QCU_MISC_CBR_THRES_ENABLE	0x00000100	/* CBR expired threshold enabled */
+#define	AR5K_QCU_MISC_RDY_VEOL_POLICY	0x00000200	/* TXE reset when RDYTIME expired or VEOL */
 #define	AR5K_QCU_MISC_CBR_RESET_CNT	0x00000400	/* CBR threshold (counter) reset */
 #define	AR5K_QCU_MISC_DCU_EARLY		0x00000800	/* DCU early termination */
 #define AR5K_QCU_MISC_DCU_CMP_EN	0x00001000	/* Enable frame compression */
@@ -663,6 +680,7 @@
 #define	AR5K_DCU_LCL_IFS_CW_MAX_S	10
 #define	AR5K_DCU_LCL_IFS_AIFS		0x0ff00000	/* Arbitrated Interframe Space */
 #define	AR5K_DCU_LCL_IFS_AIFS_S		20
+#define	AR5K_DCU_LCL_IFS_AIFS_MAX	0xfc		/* Anything above that can cause DCU to hang */
 #define	AR5K_QUEUE_DFS_LOCAL_IFS(_q)	AR5K_QUEUE_REG(AR5K_DCU_LCL_IFS_BASE, _q)
 
 /*
@@ -691,11 +709,7 @@
 /*
  * DCU misc registers [5211+]
  *
- * For some of the registers i couldn't find in the code
- * (only backoff stuff is there realy) i tried to match the
- * names with 802.11e parameters etc, so i guess VIRTCOL here
- * means Virtual Collision and HCFPOLL means Hybrid Coordination
- * factor Poll (CF- Poll). Arbiter lockout control controls the
+ * Note: Arbiter lockout control controls the
  * behaviour on low priority queues when we have multiple queues
  * with pending frames. Intra-frame lockout means we wait until
  * the queue's current frame transmits (with post frame backoff and bursting)
@@ -705,15 +719,20 @@
  * No lockout means there is no special handling.
  */
 #define AR5K_DCU_MISC_BASE		0x1100			/* Register Address -Queue0 DCU_MISC */
-#define	AR5K_DCU_MISC_BACKOFF		0x000007ff	/* Mask for backoff threshold */
+#define	AR5K_DCU_MISC_BACKOFF		0x0000003f	/* Mask for backoff threshold */
+#define	AR5K_DCU_MISC_ETS_RTS_POL	0x00000040	/* End of transmission series
+							station RTS/data failure count
+							reset policy (?) */
+#define AR5K_DCU_MISC_ETS_CW_POL	0x00000080	/* End of transmission series
+							CW reset policy */
+#define	AR5K_DCU_MISC_FRAG_WAIT		0x00000100	/* Wait for next fragment */
 #define AR5K_DCU_MISC_BACKOFF_FRAG	0x00000200	/* Enable backoff while bursting */
 #define	AR5K_DCU_MISC_HCFPOLL_ENABLE	0x00000800	/* CF - Poll enable */
 #define	AR5K_DCU_MISC_BACKOFF_PERSIST	0x00001000	/* Persistent backoff */
 #define	AR5K_DCU_MISC_FRMPRFTCH_ENABLE	0x00002000	/* Enable frame pre-fetch */
 #define	AR5K_DCU_MISC_VIRTCOL		0x0000c000	/* Mask for Virtual Collision (?) */
-#define	AR5K_DCU_MISC_VIRTCOL_NORMAL		0
-#define	AR5K_DCU_MISC_VIRTCOL_MODIFIED		1
-#define	AR5K_DCU_MISC_VIRTCOL_IGNORE		2
+#define	AR5K_DCU_MISC_VIRTCOL_NORMAL	0
+#define	AR5K_DCU_MISC_VIRTCOL_IGNORE	1
 #define	AR5K_DCU_MISC_BCN_ENABLE	0x00010000	/* Enable Beacon use */
 #define	AR5K_DCU_MISC_ARBLOCK_CTL	0x00060000	/* Arbiter lockout control mask */
 #define	AR5K_DCU_MISC_ARBLOCK_CTL_S	17
@@ -768,8 +787,9 @@
 #define	AR5K_DCU_GBL_IFS_MISC_TURBO_MODE	0x00000008	/* Turbo mode */
 #define	AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC	0x000003f0	/* SIFS Duration mask */
 #define	AR5K_DCU_GBL_IFS_MISC_USEC_DUR		0x000ffc00	/* USEC Duration mask */
+#define	AR5K_DCU_GBL_IFS_MISC_USEC_DUR_S	10
 #define	AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY	0x00300000	/* DCU Arbiter delay mask */
-#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST	0x00400000	/* SIFC cnt reset policy (?) */
+#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST	0x00400000	/* SIFS cnt reset policy (?) */
 #define AR5K_DCU_GBL_IFS_MISC_AIFS_CNT_RST	0x00800000	/* AIFS cnt reset policy (?) */
 #define AR5K_DCU_GBL_IFS_MISC_RND_LFSR_SL_DIS	0x01000000	/* Disable random LFSR slice */
 
@@ -820,8 +840,6 @@
 #define AR5K_RESET_CTL_MAC	0x00000004	/* MAC reset (PCU+Baseband ?) [5210] */
 #define AR5K_RESET_CTL_PHY	0x00000008	/* PHY reset [5210] */
 #define AR5K_RESET_CTL_PCI	0x00000010	/* PCI Core reset (interrupts etc) */
-#define AR5K_RESET_CTL_CHIP	(AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA |	\
-				AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY)
 
 /*
  * Sleep control register
@@ -833,9 +851,11 @@
 #define AR5K_SLEEP_CTL_SLE_S		16
 #define AR5K_SLEEP_CTL_SLE_WAKE		0x00000000	/* Force chip awake */
 #define AR5K_SLEEP_CTL_SLE_SLP		0x00010000	/* Force chip sleep */
-#define AR5K_SLEEP_CTL_SLE_ALLOW	0x00020000
+#define AR5K_SLEEP_CTL_SLE_ALLOW	0x00020000	/* Normal sleep policy */
 #define AR5K_SLEEP_CTL_SLE_UNITS	0x00000008	/* [5211+] */
-/* more bits */
+#define AR5K_SLEEP_CTL_DUR_TIM_POL	0x00040000	/* Sleep duration timing policy */
+#define AR5K_SLEEP_CTL_DUR_WRITE_POL	0x00080000	/* Sleep duration write policy */
+#define AR5K_SLEEP_CTL_SLE_POL		0x00100000	/* Sleep policy mode */
 
 /*
  * Interrupt pending register
@@ -851,27 +871,28 @@
 
 /*
  * PCI configuration register
+ * TODO: Fix LED stuff
  */
 #define AR5K_PCICFG			0x4010			/* Register Address */
 #define AR5K_PCICFG_EEAE		0x00000001	/* Eeprom access enable [5210] */
-#define	AR5K_PCICFG_SLEEP_CLOCK_EN	0x00000002	/* Enable sleep clock (?) */
+#define AR5K_PCICFG_SLEEP_CLOCK_EN	0x00000002	/* Enable sleep clock */
 #define AR5K_PCICFG_CLKRUNEN		0x00000004	/* CLKRUN enable [5211+] */
 #define AR5K_PCICFG_EESIZE		0x00000018	/* Mask for EEPROM size [5211+] */
 #define AR5K_PCICFG_EESIZE_S		3
 #define AR5K_PCICFG_EESIZE_4K		0		/* 4K */
 #define AR5K_PCICFG_EESIZE_8K		1		/* 8K */
 #define AR5K_PCICFG_EESIZE_16K		2		/* 16K */
-#define AR5K_PCICFG_EESIZE_FAIL		3		/* Failed to get size (?) [5211+] */
+#define AR5K_PCICFG_EESIZE_FAIL		3		/* Failed to get size [5211+] */
 #define AR5K_PCICFG_LED			0x00000060	/* Led status [5211+] */
 #define AR5K_PCICFG_LED_NONE		0x00000000	/* Default [5211+] */
 #define AR5K_PCICFG_LED_PEND		0x00000020	/* Scan / Auth pending */
 #define AR5K_PCICFG_LED_ASSOC		0x00000040	/* Associated */
 #define	AR5K_PCICFG_BUS_SEL		0x00000380	/* Mask for "bus select" [5211+] (?) */
-#define	AR5K_PCICFG_CBEFIX_DIS		0x00000400	/* Disable CBE fix (?) */
-#define AR5K_PCICFG_SL_INTEN		0x00000800	/* Enable interrupts when asleep (?) */
+#define AR5K_PCICFG_CBEFIX_DIS		0x00000400	/* Disable CBE fix */
+#define AR5K_PCICFG_SL_INTEN		0x00000800	/* Enable interrupts when asleep */
 #define AR5K_PCICFG_LED_BCTL		0x00001000	/* Led blink (?) [5210] */
-#define	AR5K_PCICFG_UNK			0x00001000	/* Passed on some parts durring attach (?) */
-#define AR5K_PCICFG_SL_INPEN		0x00002000	/* Sleep even whith pending interrupts (?) */
+#define AR5K_PCICFG_RETRY_FIX		0x00001000	/* Enable pci core retry fix */
+#define AR5K_PCICFG_SL_INPEN		0x00002000	/* Sleep even whith pending interrupts*/
 #define AR5K_PCICFG_SPWR_DN		0x00010000	/* Mask for power status */
 #define AR5K_PCICFG_LEDMODE		0x000e0000	/* Ledmode [5211+] */
 #define AR5K_PCICFG_LEDMODE_PROP	0x00000000	/* Blink on standard traffic [5211+] */
@@ -884,7 +905,8 @@
 #define AR5K_PCICFG_LEDSTATE				\
 	(AR5K_PCICFG_LED | AR5K_PCICFG_LEDMODE |	\
 	AR5K_PCICFG_LEDBLINK | AR5K_PCICFG_LEDSLOW)
-#define	AR5K_PCICFG_SLEEP_CLOCK_RATE	0x03000000	/* Sleep clock rate (field) */
+#define	AR5K_PCICFG_SLEEP_CLOCK_RATE	0x03000000	/* Sleep clock rate */
+#define	AR5K_PCICFG_SLEEP_CLOCK_RATE_S	24
 
 /*
  * "General Purpose Input/Output" (GPIO) control register
@@ -906,8 +928,8 @@
 
 #define AR5K_GPIOCR		0x4014				/* Register Address */
 #define AR5K_GPIOCR_INT_ENA	0x00008000		/* Enable GPIO interrupt */
-#define AR5K_GPIOCR_INT_SELL	0x00000000		/* Generate interrupt when pin is off (?) */
-#define AR5K_GPIOCR_INT_SELH	0x00010000		/* Generate interrupt when pin is on */
+#define AR5K_GPIOCR_INT_SELL	0x00000000		/* Generate interrupt when pin is low */
+#define AR5K_GPIOCR_INT_SELH	0x00010000		/* Generate interrupt when pin is high */
 #define AR5K_GPIOCR_IN(n)	(0 << ((n) * 2))	/* Mode 0 for pin n */
 #define AR5K_GPIOCR_OUT0(n)	(1 << ((n) * 2))	/* Mode 1 for pin n */
 #define AR5K_GPIOCR_OUT1(n)	(2 << ((n) * 2))	/* Mode 2 for pin n */
@@ -925,7 +947,6 @@
 #define AR5K_GPIODI	0x401c
 #define AR5K_GPIODI_M	0x0000002f
 
-
 /*
  * Silicon revision register
  */
@@ -935,7 +956,59 @@
 #define AR5K_SREV_VER		0x000000ff	/* Mask for version */
 #define AR5K_SREV_VER_S		4
 
+/*
+ * TXE write posting register
+ */
+#define	AR5K_TXEPOST	0x4028
+
+/*
+ * QCU sleep mask
+ */
+#define	AR5K_QCU_SLEEP_MASK	0x402c
+
+/* 0x4068 is compression buffer configuration
+ * register on 5414 and pm configuration register
+ * on 5424 and newer pci-e chips. */
+
+/*
+ * Compression buffer configuration
+ * register (enable/disable) [5414]
+ */
+#define AR5K_5414_CBCFG		0x4068
+#define AR5K_5414_CBCFG_BUF_DIS	0x10	/* Disable buffer */
+
+/*
+ * PCI-E Power managment configuration
+ * and status register [5424+]
+ */
+#define	AR5K_PCIE_PM_CTL		0x4068			/* Register address */
+/* Only 5424 */
+#define	AR5K_PCIE_PM_CTL_L1_WHEN_D2	0x00000001	/* enable PCIe core enter L1
+							when d2_sleep_en is asserted */
+#define	AR5K_PCIE_PM_CTL_L0_L0S_CLEAR	0x00000002	/* Clear L0 and L0S counters */
+#define	AR5K_PCIE_PM_CTL_L0_L0S_EN	0x00000004	/* Start L0 nd L0S counters */
+#define	AR5K_PCIE_PM_CTL_LDRESET_EN	0x00000008	/* Enable reset when link goes
+							down */
+/* Wake On Wireless */
+#define	AR5K_PCIE_PM_CTL_PME_EN		0x00000010	/* PME Enable */
+#define	AR5K_PCIE_PM_CTL_AUX_PWR_DET	0x00000020	/* Aux power detect */
+#define	AR5K_PCIE_PM_CTL_PME_CLEAR	0x00000040	/* Clear PME */
+#define	AR5K_PCIE_PM_CTL_PSM_D0		0x00000080
+#define	AR5K_PCIE_PM_CTL_PSM_D1		0x00000100
+#define	AR5K_PCIE_PM_CTL_PSM_D2		0x00000200
+#define	AR5K_PCIE_PM_CTL_PSM_D3		0x00000400
+
+/*
+ * PCI-E Workaround enable register
+ */
+#define	AR5K_PCIE_WAEN	0x407c
 
+/*
+ * PCI-E Serializer/Desirializer
+ * registers
+ */
+#define	AR5K_PCIE_SERDES	0x4080
+#define	AR5K_PCIE_SERDES_RESET	0x4084
 
 /*====EEPROM REGISTERS====*/
 
@@ -977,98 +1050,6 @@
 #define AR5K_EEPROM_BASE	0x6000
 
 /*
- * Common ar5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE)
- */
-#define AR5K_EEPROM_MAGIC		0x003d	/* EEPROM Magic number */
-#define AR5K_EEPROM_MAGIC_VALUE		0x5aa5	/* Default - found on EEPROM */
-#define AR5K_EEPROM_MAGIC_5212		0x0000145c /* 5212 */
-#define AR5K_EEPROM_MAGIC_5211		0x0000145b /* 5211 */
-#define AR5K_EEPROM_MAGIC_5210		0x0000145a /* 5210 */
-
-#define AR5K_EEPROM_PROTECT		0x003f	/* EEPROM protect status */
-#define AR5K_EEPROM_PROTECT_RD_0_31	0x0001	/* Read protection bit for offsets 0x0 - 0x1f */
-#define AR5K_EEPROM_PROTECT_WR_0_31	0x0002	/* Write protection bit for offsets 0x0 - 0x1f */
-#define AR5K_EEPROM_PROTECT_RD_32_63	0x0004	/* 0x20 - 0x3f */
-#define AR5K_EEPROM_PROTECT_WR_32_63	0x0008
-#define AR5K_EEPROM_PROTECT_RD_64_127	0x0010	/* 0x40 - 0x7f */
-#define AR5K_EEPROM_PROTECT_WR_64_127	0x0020
-#define AR5K_EEPROM_PROTECT_RD_128_191	0x0040	/* 0x80 - 0xbf (regdom) */
-#define AR5K_EEPROM_PROTECT_WR_128_191	0x0080
-#define AR5K_EEPROM_PROTECT_RD_192_207	0x0100	/* 0xc0 - 0xcf */
-#define AR5K_EEPROM_PROTECT_WR_192_207	0x0200
-#define AR5K_EEPROM_PROTECT_RD_208_223	0x0400	/* 0xd0 - 0xdf */
-#define AR5K_EEPROM_PROTECT_WR_208_223	0x0800
-#define AR5K_EEPROM_PROTECT_RD_224_239	0x1000	/* 0xe0 - 0xef */
-#define AR5K_EEPROM_PROTECT_WR_224_239	0x2000
-#define AR5K_EEPROM_PROTECT_RD_240_255	0x4000	/* 0xf0 - 0xff */
-#define AR5K_EEPROM_PROTECT_WR_240_255	0x8000
-#define AR5K_EEPROM_REG_DOMAIN		0x00bf	/* EEPROM regdom */
-#define AR5K_EEPROM_INFO_BASE		0x00c0	/* EEPROM header */
-#define AR5K_EEPROM_INFO_MAX		(0x400 - AR5K_EEPROM_INFO_BASE)
-#define AR5K_EEPROM_INFO_CKSUM		0xffff
-#define AR5K_EEPROM_INFO(_n)		(AR5K_EEPROM_INFO_BASE + (_n))
-
-#define AR5K_EEPROM_VERSION		AR5K_EEPROM_INFO(1)	/* EEPROM Version */
-#define AR5K_EEPROM_VERSION_3_0		0x3000	/* No idea what's going on before this version */
-#define AR5K_EEPROM_VERSION_3_1		0x3001	/* ob/db values for 2Ghz (ar5211_rfregs) */
-#define AR5K_EEPROM_VERSION_3_2		0x3002	/* different frequency representation (eeprom_bin2freq) */
-#define AR5K_EEPROM_VERSION_3_3		0x3003	/* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */
-#define AR5K_EEPROM_VERSION_3_4		0x3004	/* has ee_i_gain ee_cck_ofdm_power_delta (eeprom_read_modes) */
-#define AR5K_EEPROM_VERSION_4_0		0x4000	/* has ee_misc*, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */
-#define AR5K_EEPROM_VERSION_4_1		0x4001	/* has ee_margin_tx_rx (eeprom_init) */
-#define AR5K_EEPROM_VERSION_4_2		0x4002	/* has ee_cck_ofdm_gain_delta (eeprom_init) */
-#define AR5K_EEPROM_VERSION_4_3		0x4003
-#define AR5K_EEPROM_VERSION_4_4		0x4004
-#define AR5K_EEPROM_VERSION_4_5		0x4005
-#define AR5K_EEPROM_VERSION_4_6		0x4006	/* has ee_scaled_cck_delta */
-#define AR5K_EEPROM_VERSION_4_7		0x4007
-
-#define AR5K_EEPROM_MODE_11A		0
-#define AR5K_EEPROM_MODE_11B		1
-#define AR5K_EEPROM_MODE_11G		2
-
-#define AR5K_EEPROM_HDR			AR5K_EEPROM_INFO(2)	/* Header that contains the device caps */
-#define AR5K_EEPROM_HDR_11A(_v)		(((_v) >> AR5K_EEPROM_MODE_11A) & 0x1)
-#define AR5K_EEPROM_HDR_11B(_v)		(((_v) >> AR5K_EEPROM_MODE_11B) & 0x1)
-#define AR5K_EEPROM_HDR_11G(_v)		(((_v) >> AR5K_EEPROM_MODE_11G) & 0x1)
-#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v)	(((_v) >> 3) & 0x1)	/* Disable turbo for 2Ghz (?) */
-#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v)	(((_v) >> 4) & 0x7f)	/* Max turbo power for a/XR mode (eeprom_init) */
-#define AR5K_EEPROM_HDR_DEVICE(_v)	(((_v) >> 11) & 0x7)
-#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v)	(((_v) >> 15) & 0x1)	/* Disable turbo for 5Ghz (?) */
-#define AR5K_EEPROM_HDR_RFKILL(_v)	(((_v) >> 14) & 0x1)	/* Device has RFKill support */
-
-#define AR5K_EEPROM_RFKILL_GPIO_SEL	0x0000001c
-#define AR5K_EEPROM_RFKILL_GPIO_SEL_S	2
-#define AR5K_EEPROM_RFKILL_POLARITY	0x00000002
-#define AR5K_EEPROM_RFKILL_POLARITY_S	1
-
-/* Newer EEPROMs are using a different offset */
-#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \
-	(((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0)
-
-#define AR5K_EEPROM_ANT_GAIN(_v)	AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3)
-#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v)	((int8_t)(((_v) >> 8) & 0xff))
-#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v)	((int8_t)((_v) & 0xff))
-
-/* calibration settings */
-#define AR5K_EEPROM_MODES_11A(_v)	AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4)
-#define AR5K_EEPROM_MODES_11B(_v)	AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2)
-#define AR5K_EEPROM_MODES_11G(_v)	AR5K_EEPROM_OFF(_v, 0x00da, 0x010d)
-#define AR5K_EEPROM_CTL(_v)		AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128)	/* Conformance test limits */
-
-/* [3.1 - 3.3] */
-#define AR5K_EEPROM_OBDB0_2GHZ		0x00ec
-#define AR5K_EEPROM_OBDB1_2GHZ		0x00ed
-
-/* Misc values available since EEPROM 4.0 */
-#define AR5K_EEPROM_MISC0		0x00c4
-#define AR5K_EEPROM_EARSTART(_v)	((_v) & 0xfff)
-#define AR5K_EEPROM_EEMAP(_v)		(((_v) >> 14) & 0x3)
-#define AR5K_EEPROM_MISC1		0x00c5
-#define AR5K_EEPROM_TARGET_PWRSTART(_v)	((_v) & 0xfff)
-#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v)	(((_v) >> 14) & 0x1)
-
-/*
  * EEPROM data register
  */
 #define AR5K_EEPROM_DATA_5211	0x6004
@@ -1100,14 +1081,28 @@
  * EEPROM config register
  */
 #define AR5K_EEPROM_CFG			0x6010			/* Register Addres */
-#define AR5K_EEPROM_CFG_SIZE_OVR	0x00000001
+#define AR5K_EEPROM_CFG_SIZE		0x00000003		/* Size determination override */
+#define AR5K_EEPROM_CFG_SIZE_AUTO	0
+#define AR5K_EEPROM_CFG_SIZE_4KBIT	1
+#define AR5K_EEPROM_CFG_SIZE_8KBIT	2
+#define AR5K_EEPROM_CFG_SIZE_16KBIT	3
 #define AR5K_EEPROM_CFG_WR_WAIT_DIS	0x00000004	/* Disable write wait */
 #define AR5K_EEPROM_CFG_CLK_RATE	0x00000018	/* Clock rate */
-#define AR5K_EEPROM_CFG_PROT_KEY	0x00ffff00	/* Protectio key */
+#define AR5K_EEPROM_CFG_CLK_RATE_S		3
+#define AR5K_EEPROM_CFG_CLK_RATE_156KHZ	0
+#define AR5K_EEPROM_CFG_CLK_RATE_312KHZ	1
+#define AR5K_EEPROM_CFG_CLK_RATE_625KHZ	2
+#define AR5K_EEPROM_CFG_PROT_KEY	0x00ffff00      /* Protection key */
+#define AR5K_EEPROM_CFG_PROT_KEY_S	8
 #define AR5K_EEPROM_CFG_LIND_EN		0x01000000	/* Enable length indicator (?) */
 
 
 /*
+ * TODO: Wake On Wireless registers
+ * Range 0x7000 - 0x7ce0
+ */
+
+/*
  * Protocol Control Unit (PCU) registers
  */
 /*
@@ -1139,11 +1134,13 @@
 #define AR5K_STA_ID1_DESC_ANTENNA	0x00400000	/* Update antenna from descriptor */
 #define AR5K_STA_ID1_RTS_DEF_ANTENNA	0x00800000	/* Use default antenna for RTS */
 #define AR5K_STA_ID1_ACKCTS_6MB		0x01000000	/* Use 6Mbit/s for ACK/CTS */
-#define AR5K_STA_ID1_BASE_RATE_11B	0x02000000	/* Use 11b base rate (for ACK/CTS ?) [5211+] */
-#define AR5K_STA_ID1_SELF_GEN_SECTORE	0x04000000	/* Self generate sectore (?) */
+#define AR5K_STA_ID1_BASE_RATE_11B	0x02000000	/* Use 11b base rate for ACK/CTS [5211+] */
+#define AR5K_STA_ID1_SELFGEN_DEF_ANT	0x04000000	/* Use def. antenna for self generated frames */
 #define AR5K_STA_ID1_CRYPT_MIC_EN	0x08000000	/* Enable MIC */
-#define AR5K_STA_ID1_KEYSRCH_MODE	0x10000000	/* Keysearch mode (?) */
+#define AR5K_STA_ID1_KEYSRCH_MODE	0x10000000	/* Look up key when key id != 0 */
 #define AR5K_STA_ID1_PRESERVE_SEQ_NUM	0x20000000	/* Preserve sequence number */
+#define AR5K_STA_ID1_CBCIV_ENDIAN	0x40000000	/* ??? */
+#define AR5K_STA_ID1_KEYSRCH_MCAST	0x80000000	/* Do key cache search for mcast frames */
 
 /*
  * First BSSID register (MAC address, lower 32bits)
@@ -1402,16 +1399,16 @@
 #define AR5K_DIAG_SW_LOOP_BACK_5211	0x00000040
 #define AR5K_DIAG_SW_LOOP_BACK		(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_DIAG_SW_LOOP_BACK_5210 : AR5K_DIAG_SW_LOOP_BACK_5211)
-#define AR5K_DIAG_SW_CORR_FCS_5210	0x00000100
+#define AR5K_DIAG_SW_CORR_FCS_5210	0x00000100	/* Corrupted FCS */
 #define AR5K_DIAG_SW_CORR_FCS_5211	0x00000080
 #define AR5K_DIAG_SW_CORR_FCS		(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_DIAG_SW_CORR_FCS_5210 : AR5K_DIAG_SW_CORR_FCS_5211)
-#define AR5K_DIAG_SW_CHAN_INFO_5210	0x00000200
+#define AR5K_DIAG_SW_CHAN_INFO_5210	0x00000200	/* Dump channel info */
 #define AR5K_DIAG_SW_CHAN_INFO_5211	0x00000100
 #define AR5K_DIAG_SW_CHAN_INFO		(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211)
-#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211	0x00000200	/* Enable scrambler seed */
-#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210	0x00000400
+#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210	0x00000400	/* Enable fixed scrambler seed */
+#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211	0x00000200
 #define AR5K_DIAG_SW_EN_SCRAM_SEED	(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_DIAG_SW_EN_SCRAM_SEED_5210 : AR5K_DIAG_SW_EN_SCRAM_SEED_5211)
 #define AR5K_DIAG_SW_ECO_ENABLE		0x00000400	/* [5211+] */
@@ -1420,12 +1417,15 @@
 #define AR5K_DIAG_SW_SCRAM_SEED_S	10
 #define AR5K_DIAG_SW_DIS_SEQ_INC	0x00040000	/* Disable seqnum increment (?)[5210] */
 #define AR5K_DIAG_SW_FRAME_NV0_5210	0x00080000
-#define AR5K_DIAG_SW_FRAME_NV0_5211	0x00020000
+#define AR5K_DIAG_SW_FRAME_NV0_5211	0x00020000	/* Accept frames of non-zero protocol number */
 #define	AR5K_DIAG_SW_FRAME_NV0		(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211)
-#define AR5K_DIAG_SW_OBSPT_M		0x000c0000
+#define AR5K_DIAG_SW_OBSPT_M		0x000c0000	/* Observation point select (?) */
 #define AR5K_DIAG_SW_OBSPT_S		18
-/* more bits */
+#define AR5K_DIAG_SW_RX_CLEAR_HIGH	0x0010000	/* Force RX Clear high */
+#define AR5K_DIAG_SW_IGNORE_CARR_SENSE	0x0020000	/* Ignore virtual carrier sense */
+#define AR5K_DIAG_SW_CHANEL_IDLE_HIGH	0x0040000	/* Force channel idle high */
+#define AR5K_DIAG_SW_PHEAR_ME		0x0080000	/* ??? */
 
 /*
  * TSF (clock) register (lower 32 bits)
@@ -1636,16 +1636,16 @@
  *
  * XXX: PCDAC steps (0.5dbm) or DBM ?
  *
- * XXX: Mask changes for newer chips to 7f
- *      like tx power table ?
  */
 #define AR5K_TXPC			0x80e8			/* Register Address */
-#define AR5K_TXPC_ACK_M			0x0000003f	/* Mask for ACK tx power */
+#define AR5K_TXPC_ACK_M			0x0000003f	/* ACK tx power */
 #define AR5K_TXPC_ACK_S			0
-#define AR5K_TXPC_CTS_M			0x00003f00	/* Mask for CTS tx power */
+#define AR5K_TXPC_CTS_M			0x00003f00	/* CTS tx power */
 #define AR5K_TXPC_CTS_S			8
-#define AR5K_TXPC_CHIRP_M		0x003f0000	/* Mask for CHIRP tx power */
-#define AR5K_TXPC_CHIRP_S		22
+#define AR5K_TXPC_CHIRP_M		0x003f0000	/* CHIRP tx power */
+#define AR5K_TXPC_CHIRP_S		16
+#define AR5K_TXPC_DOPPLER		0x0f000000	/* Doppler chirp span (?) */
+#define AR5K_TXPC_DOPPLER_S		24
 
 /*
  * Profile count registers
@@ -1656,14 +1656,19 @@
 #define AR5K_PROFCNT_CYCLE		0x80f8	/* Cycle count (?) */
 
 /*
- * Quiet (period) control registers (?)
+ * Quiet period control registers
  */
 #define AR5K_QUIET_CTL1			0x80fc			/* Register Address */
-#define AR5K_QUIET_CTL1_NEXT_QT		0x0000ffff	/* Mask for next quiet (period?) (?) */
-#define AR5K_QUIET_CTL1_QT_EN		0x00010000	/* Enable quiet (period?) */
+#define AR5K_QUIET_CTL1_NEXT_QT_TSF	0x0000ffff	/* Next quiet period TSF (TU) */
+#define AR5K_QUIET_CTL1_NEXT_QT_TSF_S	0
+#define AR5K_QUIET_CTL1_QT_EN		0x00010000	/* Enable quiet period */
+#define AR5K_QUIET_CTL1_ACK_CTS_EN	0x00020000	/* Send ACK/CTS during quiet period */
+
 #define AR5K_QUIET_CTL2			0x8100			/* Register Address */
-#define AR5K_QUIET_CTL2_QT_PER		0x0000ffff	/* Mask for quiet period (?) */
-#define AR5K_QUIET_CTL2_QT_DUR		0xffff0000	/* Mask for quiet duration (?) */
+#define AR5K_QUIET_CTL2_QT_PER		0x0000ffff	/* Mask for quiet period periodicity */
+#define AR5K_QUIET_CTL2_QT_PER_S	0
+#define AR5K_QUIET_CTL2_QT_DUR		0xffff0000	/* Mask for quiet period duration */
+#define AR5K_QUIET_CTL2_QT_DUR_S	16
 
 /*
  * TSF parameter register
@@ -1673,12 +1678,15 @@
 #define AR5K_TSF_PARM_INC_S		0
 
 /*
- * QoS register (?)
+ * QoS NOACK policy
  */
-#define AR5K_QOS			0x8108			/* Register Address */
-#define AR5K_QOS_NOACK_2BIT_VALUES	0x00000000	/* (field) */
-#define AR5K_QOS_NOACK_BIT_OFFSET	0x00000020	/* (field) */
-#define AR5K_QOS_NOACK_BYTE_OFFSET	0x00000080	/* (field) */
+#define AR5K_QOS_NOACK			0x8108			/* Register Address */
+#define AR5K_QOS_NOACK_2BIT_VALUES	0x0000000f	/* ??? */
+#define AR5K_QOS_NOACK_2BIT_VALUES_S	0
+#define AR5K_QOS_NOACK_BIT_OFFSET	0x00000070	/* ??? */
+#define AR5K_QOS_NOACK_BIT_OFFSET_S	4
+#define AR5K_QOS_NOACK_BYTE_OFFSET	0x00000180	/* ??? */
+#define AR5K_QOS_NOACK_BYTE_OFFSET_S	8
 
 /*
  * PHY error filter register
@@ -1702,29 +1710,15 @@
 /*
  * MIC QoS control register (?)
  */
-#define	AR5K_MIC_QOS_CTL	0x8118			/* Register Address */
-#define	AR5K_MIC_QOS_CTL_0	0x00000001	/* MIC QoS control 0 (?) */
-#define	AR5K_MIC_QOS_CTL_1	0x00000004	/* MIC QoS control 1 (?) */
-#define	AR5K_MIC_QOS_CTL_2	0x00000010	/* MIC QoS control 2 (?) */
-#define	AR5K_MIC_QOS_CTL_3	0x00000040	/* MIC QoS control 3 (?) */
-#define	AR5K_MIC_QOS_CTL_4	0x00000100	/* MIC QoS control 4 (?) */
-#define	AR5K_MIC_QOS_CTL_5	0x00000400	/* MIC QoS control 5 (?) */
-#define	AR5K_MIC_QOS_CTL_6	0x00001000	/* MIC QoS control 6 (?) */
-#define	AR5K_MIC_QOS_CTL_7	0x00004000	/* MIC QoS control 7 (?) */
-#define	AR5K_MIC_QOS_CTL_MQ_EN	0x00010000	/* Enable MIC QoS */
+#define	AR5K_MIC_QOS_CTL		0x8118			/* Register Address */
+#define	AR5K_MIC_QOS_CTL_OFF(_n)	(1 << (_n * 2))
+#define	AR5K_MIC_QOS_CTL_MQ_EN		0x00010000	/* Enable MIC QoS */
 
 /*
  * MIC QoS select register (?)
  */
-#define	AR5K_MIC_QOS_SEL	0x811c
-#define	AR5K_MIC_QOS_SEL_0	0x00000001
-#define	AR5K_MIC_QOS_SEL_1	0x00000010
-#define	AR5K_MIC_QOS_SEL_2	0x00000100
-#define	AR5K_MIC_QOS_SEL_3	0x00001000
-#define	AR5K_MIC_QOS_SEL_4	0x00010000
-#define	AR5K_MIC_QOS_SEL_5	0x00100000
-#define	AR5K_MIC_QOS_SEL_6	0x01000000
-#define	AR5K_MIC_QOS_SEL_7	0x10000000
+#define	AR5K_MIC_QOS_SEL		0x811c
+#define	AR5K_MIC_QOS_SEL_OFF(_n)	(1 << (_n * 4))
 
 /*
  * Misc mode control register (?)
@@ -1759,6 +1753,11 @@
 #define	AR5K_TSF_THRES			0x813c
 
 /*
+ * TODO: Wake On Wireless registers
+ * Range: 0x8147 - 0x818c
+ */
+
+/*
  * Rate -> ACK SIFS mapping table (32 entries)
  */
 #define	AR5K_RATE_ACKSIFS_BASE		0x8680			/* Register Address */
@@ -1873,7 +1872,8 @@
  */
 #define	AR5K_PHY_TURBO			0x9804			/* Register Address */
 #define	AR5K_PHY_TURBO_MODE		0x00000001	/* Enable turbo mode */
-#define	AR5K_PHY_TURBO_SHORT		0x00000002	/* Short mode (20Mhz channels) (?) */
+#define	AR5K_PHY_TURBO_SHORT		0x00000002	/* Set short symbols to turbo mode */
+#define	AR5K_PHY_TURBO_MIMO		0x00000004	/* Set turbo for mimo mimo */
 
 /*
  * PHY agility command register
@@ -1883,6 +1883,11 @@
 #define	AR5K_PHY_TST1			0x9808
 #define	AR5K_PHY_AGC_DISABLE		0x08000000	/* Disable AGC to A2 (?)*/
 #define	AR5K_PHY_TST1_TXHOLD		0x00003800	/* Set tx hold (?) */
+#define	AR5K_PHY_TST1_TXSRC_SRC		0x00000002	/* Used with bit 7 (?) */
+#define	AR5K_PHY_TST1_TXSRC_SRC_S	1
+#define	AR5K_PHY_TST1_TXSRC_ALT		0x00000080	/* Set input to tsdac (?) */
+#define	AR5K_PHY_TST1_TXSRC_ALT_S	7
+
 
 /*
  * PHY timing register 3 [5112+]
@@ -1907,15 +1912,23 @@
 
 /*
  * PHY RF control registers
- * (i think these are delay times,
- * these calibration values exist
- * in EEPROM)
  */
 #define AR5K_PHY_RF_CTL2		0x9824			/* Register Address */
-#define	AR5K_PHY_RF_CTL2_TXF2TXD_START	0x0000000f	/* Mask for TX frame to TX d(esc?) start */
+#define	AR5K_PHY_RF_CTL2_TXF2TXD_START	0x0000000f	/* TX frame to TX data start */
+#define	AR5K_PHY_RF_CTL2_TXF2TXD_START_S	0
 
 #define AR5K_PHY_RF_CTL3		0x9828			/* Register Address */
-#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON	0x0000000f	/* Mask for TX end to XLNA on */
+#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON	0x0000000f	/* TX end to XLNA on */
+#define	AR5K_PHY_RF_CTL3_TXE2XLNA_ON_S	0
+
+#define	AR5K_PHY_ADC_CTL			0x982c
+#define	AR5K_PHY_ADC_CTL_INBUFGAIN_OFF		0x00000003
+#define	AR5K_PHY_ADC_CTL_INBUFGAIN_OFF_S	0
+#define	AR5K_PHY_ADC_CTL_PWD_DAC_OFF		0x00002000
+#define	AR5K_PHY_ADC_CTL_PWD_BAND_GAP_OFF	0x00004000
+#define	AR5K_PHY_ADC_CTL_PWD_ADC_OFF		0x00008000
+#define	AR5K_PHY_ADC_CTL_INBUFGAIN_ON		0x00030000
+#define	AR5K_PHY_ADC_CTL_INBUFGAIN_ON_S		16
 
 #define AR5K_PHY_RF_CTL4		0x9834			/* Register Address */
 #define AR5K_PHY_RF_CTL4_TXF2XPA_A_ON	0x00000001	/* TX frame to XPA A on (field) */
@@ -1937,35 +1950,43 @@
  * PHY settling register
  */
 #define AR5K_PHY_SETTLING		0x9844			/* Register Address */
-#define	AR5K_PHY_SETTLING_AGC		0x0000007f	/* Mask for AGC settling time */
-#define	AR5K_PHY_SETTLING_SWITCH	0x00003f80	/* Mask for Switch settlig time */
+#define	AR5K_PHY_SETTLING_AGC		0x0000007f	/* AGC settling time */
+#define	AR5K_PHY_SETTLING_AGC_S		0
+#define	AR5K_PHY_SETTLING_SWITCH	0x00003f80	/* Switch settlig time */
+#define	AR5K_PHY_SETTLINK_SWITCH_S	7
 
 /*
  * PHY Gain registers
  */
 #define AR5K_PHY_GAIN			0x9848			/* Register Address */
-#define	AR5K_PHY_GAIN_TXRX_ATTEN	0x0003f000	/* Mask for TX-RX Attenuation */
+#define	AR5K_PHY_GAIN_TXRX_ATTEN	0x0003f000	/* TX-RX Attenuation */
+#define	AR5K_PHY_GAIN_TXRX_ATTEN_S	12
+#define	AR5K_PHY_GAIN_TXRX_RF_MAX	0x007c0000
+#define	AR5K_PHY_GAIN_TXRX_RF_MAX_S	18
 
 #define	AR5K_PHY_GAIN_OFFSET		0x984c			/* Register Address */
 #define	AR5K_PHY_GAIN_OFFSET_RXTX_FLAG	0x00020000	/* RX-TX flag (?) */
 
 /*
- * Desired size register
+ * Desired ADC/PGA size register
  * (for more infos read ANI patent)
  */
 #define AR5K_PHY_DESIRED_SIZE		0x9850			/* Register Address */
-#define	AR5K_PHY_DESIRED_SIZE_ADC	0x000000ff	/* Mask for ADC desired size */
-#define	AR5K_PHY_DESIRED_SIZE_PGA	0x0000ff00	/* Mask for PGA desired size */
-#define	AR5K_PHY_DESIRED_SIZE_TOT	0x0ff00000	/* Mask for Total desired size (?) */
+#define	AR5K_PHY_DESIRED_SIZE_ADC	0x000000ff	/* ADC desired size */
+#define	AR5K_PHY_DESIRED_SIZE_ADC_S	0
+#define	AR5K_PHY_DESIRED_SIZE_PGA	0x0000ff00	/* PGA desired size */
+#define	AR5K_PHY_DESIRED_SIZE_PGA_S	8
+#define	AR5K_PHY_DESIRED_SIZE_TOT	0x0ff00000	/* Total desired size */
+#define	AR5K_PHY_DESIRED_SIZE_TOT_S	20
 
 /*
  * PHY signal register
  * (for more infos read ANI patent)
  */
 #define	AR5K_PHY_SIG			0x9858			/* Register Address */
-#define	AR5K_PHY_SIG_FIRSTEP		0x0003f000	/* Mask for FIRSTEP */
+#define	AR5K_PHY_SIG_FIRSTEP		0x0003f000	/* FIRSTEP */
 #define	AR5K_PHY_SIG_FIRSTEP_S		12
-#define	AR5K_PHY_SIG_FIRPWR		0x03fc0000	/* Mask for FIPWR */
+#define	AR5K_PHY_SIG_FIRPWR		0x03fc0000	/* FIPWR */
 #define	AR5K_PHY_SIG_FIRPWR_S		18
 
 /*
@@ -1973,9 +1994,9 @@
  * (for more infos read ANI patent)
  */
 #define	AR5K_PHY_AGCCOARSE		0x985c			/* Register Address */
-#define	AR5K_PHY_AGCCOARSE_LO		0x00007f80	/* Mask for AGC Coarse low */
+#define	AR5K_PHY_AGCCOARSE_LO		0x00007f80	/* AGC Coarse low */
 #define	AR5K_PHY_AGCCOARSE_LO_S		7
-#define	AR5K_PHY_AGCCOARSE_HI		0x003f8000	/* Mask for AGC Coarse high */
+#define	AR5K_PHY_AGCCOARSE_HI		0x003f8000	/* AGC Coarse high */
 #define	AR5K_PHY_AGCCOARSE_HI_S		15
 
 /*
@@ -1984,6 +2005,8 @@
 #define	AR5K_PHY_AGCCTL			0x9860			/* Register address */
 #define	AR5K_PHY_AGCCTL_CAL		0x00000001	/* Enable PHY calibration */
 #define	AR5K_PHY_AGCCTL_NF		0x00000002	/* Enable Noise Floor calibration */
+#define	AR5K_PHY_AGCCTL_NF_EN		0x00008000	/* Enable nf calibration to happen (?) */
+#define	AR5K_PHY_AGCCTL_NF_NOUPDATE	0x00020000	/* Don't update nf automaticaly */
 
 /*
  * PHY noise floor status register
@@ -1994,7 +2017,10 @@
 #define AR5K_PHY_NF_RVAL(_n)		(((_n) >> 19) & AR5K_PHY_NF_M)
 #define AR5K_PHY_NF_AVAL(_n)		(-((_n) ^ AR5K_PHY_NF_M) + 1)
 #define AR5K_PHY_NF_SVAL(_n)		(((_n) & AR5K_PHY_NF_M) | (1 << 9))
-#define	AR5K_PHY_NF_THRESH62		0x00001000	/* Thresh62 -check ANI patent- (field) */
+#define	AR5K_PHY_NF_THRESH62		0x0007f000	/* Thresh62 -check ANI patent- (field) */
+#define	AR5K_PHY_NF_THRESH62_S		12
+#define	AR5K_PHY_NF_MINCCA_PWR		0x0ff80000	/* ??? */
+#define	AR5K_PHY_NF_MINCCA_PWR_S	19
 
 /*
  * PHY ADC saturation register [5110]
@@ -2034,24 +2060,31 @@
  */
 #define AR5K_PHY_SCR			0x9870
 #define AR5K_PHY_SCR_32MHZ		0x0000001f
+
 #define AR5K_PHY_SLMT			0x9874
 #define AR5K_PHY_SLMT_32MHZ		0x0000007f
+
 #define AR5K_PHY_SCAL			0x9878
 #define AR5K_PHY_SCAL_32MHZ		0x0000000e
 
+
 /*
  * PHY PLL (Phase Locked Loop) control register
  */
 #define	AR5K_PHY_PLL			0x987c
-#define	AR5K_PHY_PLL_20MHZ		0x13	/* For half rate (?) [5111+] */
-#define	AR5K_PHY_PLL_40MHZ_5211		0x18	/* For 802.11a */
+#define	AR5K_PHY_PLL_20MHZ		0x00000013	/* For half rate (?) */
+/* 40MHz -> 5GHz band */
+#define	AR5K_PHY_PLL_40MHZ_5211		0x00000018
 #define	AR5K_PHY_PLL_40MHZ_5212		0x000000aa
+#define	AR5K_PHY_PLL_40MHZ_5413		0x00000004
 #define	AR5K_PHY_PLL_40MHZ		(ah->ah_version == AR5K_AR5211 ? \
 					AR5K_PHY_PLL_40MHZ_5211 : AR5K_PHY_PLL_40MHZ_5212)
-#define	AR5K_PHY_PLL_44MHZ_5211		0x19	/* For 802.11b/g */
+/* 44MHz -> 2.4GHz band */
+#define	AR5K_PHY_PLL_44MHZ_5211		0x00000019
 #define	AR5K_PHY_PLL_44MHZ_5212		0x000000ab
 #define	AR5K_PHY_PLL_44MHZ		(ah->ah_version == AR5K_AR5211 ? \
 					AR5K_PHY_PLL_44MHZ_5211 : AR5K_PHY_PLL_44MHZ_5212)
+
 #define AR5K_PHY_PLL_RF5111		0x00000000
 #define AR5K_PHY_PLL_RF5112		0x00000040
 #define	AR5K_PHY_PLL_HALF_RATE		0x00000100
@@ -2118,6 +2151,19 @@
 #define AR5K_PHY_RFSTG_DISABLE		0x00000021
 
 /*
+ * BIN masks (?)
+ */
+#define	AR5K_PHY_BIN_MASK_1	0x9900
+#define	AR5K_PHY_BIN_MASK_2	0x9904
+#define	AR5K_PHY_BIN_MASK_3	0x9908
+
+#define	AR5K_PHY_BIN_MASK_CTL		0x990c
+#define	AR5K_PHY_BIN_MASK_CTL_MASK_4	0x00003fff
+#define	AR5K_PHY_BIN_MASK_CTL_MASK_4_S	0
+#define	AR5K_PHY_BIN_MASK_CTL_RATE	0xff000000
+#define	AR5K_PHY_BIN_MASK_CTL_RATE_S	24
+
+/*
  * PHY Antenna control register
  */
 #define AR5K_PHY_ANT_CTL		0x9910			/* Register Address */
@@ -2164,6 +2210,7 @@
 #define	AR5K_PHY_OFDM_SELFCORR			0x9924			/* Register Address */
 #define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_EN	0x00000001	/* Enable cyclic RSSI thr 1 */
 #define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1	0x000000fe	/* Mask for Cyclic RSSI threshold 1 */
+#define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_S	0
 #define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR3	0x00000100	/* Cyclic RSSI threshold 3 (field) (?) */
 #define	AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR_EN	0x00008000	/* Enable 1A RSSI threshold (?) */
 #define	AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR	0x00010000	/* 1A RSSI threshold (field) (?) */
@@ -2210,7 +2257,6 @@
 #define	AR5K_PHY_PAPD_PROBE_INI_5111	0x00004883	/* [5212+] */
 #define	AR5K_PHY_PAPD_PROBE_INI_5112	0x00004882	/* [5212+] */
 
-
 /*
  * PHY TX rate power registers [5112+]
  */
@@ -2232,6 +2278,8 @@
 #define	AR5K_PHY_FRAME_CTL_TX_CLIP	0x00000038	/* Mask for tx clip (?) */
 #define	AR5K_PHY_FRAME_CTL_TX_CLIP_S	3
 #define	AR5K_PHY_FRAME_CTL_PREP_CHINFO	0x00010000	/* Prepend chan info */
+#define	AR5K_PHY_FRAME_CTL_EMU		0x80000000
+#define	AR5K_PHY_FRAME_CTL_EMU_S	31
 /*---[5110/5111]---*/
 #define	AR5K_PHY_FRAME_CTL_TIMING_ERR	0x01000000	/* PHY timing error */
 #define	AR5K_PHY_FRAME_CTL_PARITY_ERR	0x02000000	/* Parity error */
@@ -2250,48 +2298,36 @@
  * PHY radar detection register [5111+]
  */
 #define	AR5K_PHY_RADAR			0x9954
-
-/* Radar enable 			........ ........ ........ .......1 */
 #define	AR5K_PHY_RADAR_ENABLE		0x00000001
-#define	AR5K_PHY_RADAR_DISABLE          0x00000000
-#define	AR5K_PHY_RADAR_ENABLE_S		0
-
-/* This is the value found on the card  .1.111.1 .1.1.... 111....1 1...1...
-at power on. */
-#define	AR5K_PHY_RADAR_PWONDEF_AR5213	0x5d50e188
-
-/* This is the value found on the card 	.1.1.111 ..11...1 .1...1.1 1...11.1
-after DFS is enabled */
-#define	AR5K_PHY_RADAR_ENABLED_AR5213	0x5731458d
-
-/* Finite Impulse Response (FIR) filter .1111111 ........ ........ ........
- * power out threshold.
- * 7-bits, standard power range {0..127} in 1/2 dBm units. */
-#define AR5K_PHY_RADAR_FIRPWROUTTHR    	0x7f000000
-#define AR5K_PHY_RADAR_FIRPWROUTTHR_S	24
-
-/* Radar RSSI/SNR threshold.		........ 111111.. ........ ........
- * 6-bits, dBm range {0..63} in dBm units. */
-#define AR5K_PHY_RADAR_RADARRSSITHR    	0x00fc0000
-#define AR5K_PHY_RADAR_RADARRSSITHR_S	18
-
-/* Pulse height threshold 		........ ......11 1111.... ........
- * 6-bits, dBm range {0..63} in dBm units. */
-#define AR5K_PHY_RADAR_PULSEHEIGHTTHR   0x0003f000
-#define AR5K_PHY_RADAR_PULSEHEIGHTTHR_S	12
-
-/* Pulse RSSI/SNR threshold		........ ........ ....1111 11......
- * 6-bits, dBm range {0..63} in dBm units. */
-#define AR5K_PHY_RADAR_PULSERSSITHR    	0x00000fc0
-#define AR5K_PHY_RADAR_PULSERSSITHR_S	6
-
-/* Inband threshold  			........ ........ ........ ..11111.
- * 5-bits, units unknown {0..31} (? MHz ?) */
-#define AR5K_PHY_RADAR_INBANDTHR    	0x0000003e
+#define	AR5K_PHY_RADAR_DISABLE		0x00000000
+#define AR5K_PHY_RADAR_INBANDTHR    	0x0000003e	/* Inband threshold
+							5-bits, units unknown {0..31}
+							(? MHz ?) */
 #define AR5K_PHY_RADAR_INBANDTHR_S	1
 
+#define AR5K_PHY_RADAR_PRSSI_THR    	0x00000fc0	/* Pulse RSSI/SNR threshold
+							6-bits, dBm range {0..63}
+							in dBm units. */
+#define AR5K_PHY_RADAR_PRSSI_THR_S	6
+
+#define AR5K_PHY_RADAR_PHEIGHT_THR   	0x0003f000	/* Pulse height threshold
+							6-bits, dBm range {0..63}
+							in dBm units. */
+#define AR5K_PHY_RADAR_PHEIGHT_THR_S	12
+
+#define AR5K_PHY_RADAR_RSSI_THR    	0x00fc0000	/* Radar RSSI/SNR threshold.
+							6-bits, dBm range {0..63}
+							in dBm units. */
+#define AR5K_PHY_RADAR_RSSI_THR_S	18
+
+#define AR5K_PHY_RADAR_FIRPWR_THR	0x7f000000	/* Finite Impulse Response
+							filter power out threshold.
+							7-bits, standard power range
+							{0..127} in 1/2 dBm units. */
+#define AR5K_PHY_RADAR_FIRPWR_THRS	24
+
 /*
- * PHY antenna switch table registers [5110]
+ * PHY antenna switch table registers
  */
 #define AR5K_PHY_ANT_SWITCH_TABLE_0	0x9960
 #define AR5K_PHY_ANT_SWITCH_TABLE_1	0x9964
@@ -2302,25 +2338,65 @@ after DFS is enabled */
 #define AR5K_PHY_NFTHRES		0x9968
 
 /*
- * PHY clock sleep registers [5112+]
+ * Sigma Delta register (?) [5213]
  */
-#define AR5K_PHY_SCLOCK			0x99f0
-#define AR5K_PHY_SCLOCK_32MHZ		0x0000000c
-#define AR5K_PHY_SDELAY			0x99f4
-#define AR5K_PHY_SDELAY_32MHZ		0x000000ff
-#define AR5K_PHY_SPENDING		0x99f8
-#define	AR5K_PHY_SPENDING_14		0x00000014
-#define	AR5K_PHY_SPENDING_18		0x00000018
-#define AR5K_PHY_SPENDING_RF5111	0x00000018
-#define AR5K_PHY_SPENDING_RF5112	0x00000014
-/* #define AR5K_PHY_SPENDING_RF5112A	0x0000000e */
-/* #define AR5K_PHY_SPENDING_RF5424	0x00000012 */
-#define	AR5K_PHY_SPENDING_RF5413	0x00000014
-#define	AR5K_PHY_SPENDING_RF2413	0x00000014
-#define AR5K_PHY_SPENDING_RF2425	0x00000018
+#define AR5K_PHY_SIGMA_DELTA		0x996C
+#define AR5K_PHY_SIGMA_DELTA_ADC_SEL	0x00000003
+#define AR5K_PHY_SIGMA_DELTA_ADC_SEL_S	0
+#define AR5K_PHY_SIGMA_DELTA_FILT2	0x000000f8
+#define AR5K_PHY_SIGMA_DELTA_FILT2_S	3
+#define AR5K_PHY_SIGMA_DELTA_FILT1	0x00001f00
+#define AR5K_PHY_SIGMA_DELTA_FILT1_S	8
+#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP	0x01ff3000
+#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP_S	13
+
+/*
+ * RF restart register [5112+] (?)
+ */
+#define AR5K_PHY_RESTART		0x9970		/* restart */
+#define AR5K_PHY_RESTART_DIV_GC		0x001c0000	/* Fast diversity gc_limit (?) */
+#define AR5K_PHY_RESTART_DIV_GC_S	18
+
+/*
+ * RF Bus access request register (for synth-oly channel switching)
+ */
+#define AR5K_PHY_RFBUS_REQ		0x997C
+#define AR5K_PHY_RFBUS_REQ_REQUEST	0x00000001
+
+/*
+ * Spur mitigation masks (?)
+ */
+#define AR5K_PHY_TIMING_7		0x9980
+#define AR5K_PHY_TIMING_8		0x9984
+#define AR5K_PHY_TIMING_8_PILOT_MASK_2		0x000fffff
+#define AR5K_PHY_TIMING_8_PILOT_MASK_2_S	0
+
+#define AR5K_PHY_BIN_MASK2_1		0x9988
+#define AR5K_PHY_BIN_MASK2_2		0x998c
+#define AR5K_PHY_BIN_MASK2_3		0x9990
+
+#define AR5K_PHY_BIN_MASK2_4		0x9994
+#define AR5K_PHY_BIN_MASK2_4_MASK_4	0x00003fff
+#define AR5K_PHY_BIN_MASK2_4_MASK_4_S	0
+
+#define AR_PHY_TIMING_9			0x9998
+#define AR_PHY_TIMING_10		0x999c
+#define AR_PHY_TIMING_10_PILOT_MASK_2	0x000fffff
+#define AR_PHY_TIMING_10_PILOT_MASK_2_S	0
+
+/*
+ * Spur mitigation control
+ */
+#define AR_PHY_TIMING_11			0x99a0		/* Register address */
+#define AR_PHY_TIMING_11_SPUR_DELTA_PHASE	0x000fffff	/* Spur delta phase */
+#define AR_PHY_TIMING_11_SPUR_DELTA_PHASE_S	0
+#define AR_PHY_TIMING_11_SPUR_FREQ_SD		0x3ff00000	/* Freq sigma delta */
+#define AR_PHY_TIMING_11_SPUR_FREQ_SD_S	20
+#define AR_PHY_TIMING_11_USE_SPUR_IN_AGC	0x40000000	/* Spur filter in AGC detector */
+#define AR_PHY_TIMING_11_USE_SPUR_IN_SELFCOR	0x80000000	/* Spur filter in OFDM self correlator */
 
 /*
- * Misc PHY/radio registers [5110 - 5111]
+ * Gain tables
  */
 #define	AR5K_BB_GAIN_BASE		0x9b00	/* BaseBand Amplifier Gain table base address */
 #define AR5K_BB_GAIN(_n)		(AR5K_BB_GAIN_BASE + ((_n) << 2))
@@ -2340,9 +2416,10 @@ after DFS is enabled */
 #define	AR5K_PHY_CURRENT_RSSI	0x9c1c
 
 /*
- * PHY RF Bus grant register (?)
+ * PHY RF Bus grant register
  */
 #define	AR5K_PHY_RFBUS_GRANT	0x9c20
+#define	AR5K_PHY_RFBUS_GRANT_OK	0x00000001
 
 /*
  * PHY ADC test register
@@ -2386,6 +2463,31 @@ after DFS is enabled */
 #define	AR5K_PHY_CHAN_STATUS_RX_CLR_PAP	0x00000008
 
 /*
+ * Heavy clip enable register
+ */
+#define	AR5K_PHY_HEAVY_CLIP_ENABLE	0x99e0
+
+/*
+ * PHY clock sleep registers [5112+]
+ */
+#define AR5K_PHY_SCLOCK			0x99f0
+#define AR5K_PHY_SCLOCK_32MHZ		0x0000000c
+#define AR5K_PHY_SDELAY			0x99f4
+#define AR5K_PHY_SDELAY_32MHZ		0x000000ff
+#define AR5K_PHY_SPENDING		0x99f8
+#define AR5K_PHY_SPENDING_14		0x00000014
+#define AR5K_PHY_SPENDING_18		0x00000018
+#define AR5K_PHY_SPENDING_RF5111	0x00000018
+#define AR5K_PHY_SPENDING_RF5112	0x00000014
+/* #define AR5K_PHY_SPENDING_RF5112A	0x0000000e */
+/* #define AR5K_PHY_SPENDING_RF5424	0x00000012 */
+#define AR5K_PHY_SPENDING_RF5413	0x00000018
+#define AR5K_PHY_SPENDING_RF2413	0x00000018
+#define AR5K_PHY_SPENDING_RF2316	0x00000018
+#define AR5K_PHY_SPENDING_RF2317	0x00000018
+#define AR5K_PHY_SPENDING_RF2425	0x00000014
+
+/*
  * PHY PAPD I (power?) table (?)
  * (92! entries)
  */
@@ -2436,10 +2538,47 @@ after DFS is enabled */
 #define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR	0x0000000f
 #define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S	0
 
+/* Same address is used for antenna diversity activation */
+#define	AR5K_PHY_FAST_ANT_DIV		0xa208
+#define	AR5K_PHY_FAST_ANT_DIV_EN	0x00002000
+
 /*
  * PHY 2GHz gain register [5111+]
  */
-#define	AR5K_PHY_GAIN_2GHZ		0xa20c
-#define	AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX	0x00fc0000
+#define	AR5K_PHY_GAIN_2GHZ			0xa20c
+#define	AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX		0x00fc0000
 #define	AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX_S	18
-#define	AR5K_PHY_GAIN_2GHZ_INI_5111	0x6480416c
+#define	AR5K_PHY_GAIN_2GHZ_INI_5111		0x6480416c
+
+#define	AR5K_PHY_CCK_RX_CTL_4			0xa21c
+#define	AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT	0x01f80000
+#define	AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT_S	19
+
+#define	AR5K_PHY_DAG_CCK_CTL			0xa228
+#define	AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR	0x00000200
+#define	AR5K_PHY_DAG_CCK_CTL_RSSI_THR		0x0001fc00
+#define	AR5K_PHY_DAG_CCK_CTL_RSSI_THR_S		10
+
+#define	AR5K_PHY_FAST_ADC	0xa24c
+
+#define	AR5K_PHY_BLUETOOTH	0xa254
+
+/*
+ * Transmit Power Control register
+ * [2413+]
+ */
+#define	AR5K_PHY_TPC_RG1		0xa258
+#define	AR5K_PHY_TPC_RG1_NUM_PD_GAIN	0x0000c000
+#define	AR5K_PHY_TPC_RG1_NUM_PD_GAIN_S	14
+
+#define	AR5K_PHY_TPC_RG5			0xa26C
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP	0x0000000F
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP_S	0
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1	0x000003F0
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1_S	4
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2	0x0000FC00
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2_S	10
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3	0x003F0000
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3_S	16
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4	0x0FC00000
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4_S	22
diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c
new file mode 100644
index 00000000000..8f1886834e6
--- /dev/null
+++ b/drivers/net/wireless/ath5k/reset.c
@@ -0,0 +1,931 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
+ * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#define _ATH5K_RESET
+
+/*****************************\
+  Reset functions and helpers
+\*****************************/
+
+#include <linux/pci.h>
+#include "ath5k.h"
+#include "reg.h"
+#include "base.h"
+#include "debug.h"
+
+/**
+ * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212
+ *
+ * @ah: the &struct ath5k_hw
+ * @channel: the currently set channel upon reset
+ *
+ * Write the OFDM timings for the AR5212 upon reset. This is a helper for
+ * ath5k_hw_reset(). This seems to tune the PLL a specified frequency
+ * depending on the bandwidth of the channel.
+ *
+ */
+static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
+	struct ieee80211_channel *channel)
+{
+	/* Get exponent and mantissa and set it */
+	u32 coef_scaled, coef_exp, coef_man,
+		ds_coef_exp, ds_coef_man, clock;
+
+	if (!(ah->ah_version == AR5K_AR5212) ||
+		!(channel->hw_value & CHANNEL_OFDM))
+		BUG();
+
+	/* Seems there are two PLLs, one for baseband sampling and one
+	 * for tuning. Tuning basebands are 40 MHz or 80MHz when in
+	 * turbo. */
+	clock = channel->hw_value & CHANNEL_TURBO ? 80 : 40;
+	coef_scaled = ((5 * (clock << 24)) / 2) /
+	channel->center_freq;
+
+	for (coef_exp = 31; coef_exp > 0; coef_exp--)
+		if ((coef_scaled >> coef_exp) & 0x1)
+			break;
+
+	if (!coef_exp)
+		return -EINVAL;
+
+	coef_exp = 14 - (coef_exp - 24);
+	coef_man = coef_scaled +
+		(1 << (24 - coef_exp - 1));
+	ds_coef_man = coef_man >> (24 - coef_exp);
+	ds_coef_exp = coef_exp - 16;
+
+	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
+		AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man);
+	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
+		AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp);
+
+	return 0;
+}
+
+
+/*
+ * index into rates for control rates, we can set it up like this because
+ * this is only used for AR5212 and we know it supports G mode
+ */
+static int control_rates[] =
+	{ 0, 1, 1, 1, 4, 4, 6, 6, 8, 8, 8, 8 };
+
+/**
+ * ath5k_hw_write_rate_duration - set rate duration during hw resets
+ *
+ * @ah: the &struct ath5k_hw
+ * @mode: one of enum ath5k_driver_mode
+ *
+ * Write the rate duration table upon hw reset. This is a helper for
+ * ath5k_hw_reset(). It seems all this is doing is setting an ACK timeout for
+ * the hardware for the current mode for each rate. The rates which are capable
+ * of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have another
+ * register for the short preamble ACK timeout calculation.
+ */
+static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah,
+       unsigned int mode)
+{
+	struct ath5k_softc *sc = ah->ah_sc;
+	struct ieee80211_rate *rate;
+	unsigned int i;
+
+	/* Write rate duration table */
+	for (i = 0; i < sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates; i++) {
+		u32 reg;
+		u16 tx_time;
+
+		rate = &sc->sbands[IEEE80211_BAND_2GHZ].bitrates[control_rates[i]];
+
+		/* Set ACK timeout */
+		reg = AR5K_RATE_DUR(rate->hw_value);
+
+		/* An ACK frame consists of 10 bytes. If you add the FCS,
+		 * which ieee80211_generic_frame_duration() adds,
+		 * its 14 bytes. Note we use the control rate and not the
+		 * actual rate for this rate. See mac80211 tx.c
+		 * ieee80211_duration() for a brief description of
+		 * what rate we should choose to TX ACKs. */
+		tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw,
+							sc->vif, 10, rate));
+
+		ath5k_hw_reg_write(ah, tx_time, reg);
+
+		if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE))
+			continue;
+
+		/*
+		 * We're not distinguishing short preamble here,
+		 * This is true, all we'll get is a longer value here
+		 * which is not necessarilly bad. We could use
+		 * export ieee80211_frame_duration() but that needs to be
+		 * fixed first to be properly used by mac802111 drivers:
+		 *
+		 *  - remove erp stuff and let the routine figure ofdm
+		 *    erp rates
+		 *  - remove passing argument ieee80211_local as
+		 *    drivers don't have access to it
+		 *  - move drivers using ieee80211_generic_frame_duration()
+		 *    to this
+		 */
+		ath5k_hw_reg_write(ah, tx_time,
+			reg + (AR5K_SET_SHORT_PREAMBLE << 2));
+	}
+}
+
+/*
+ * Reset chipset
+ */
+static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val)
+{
+	int ret;
+	u32 mask = val ? val : ~0U;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	/* Read-and-clear RX Descriptor Pointer*/
+	ath5k_hw_reg_read(ah, AR5K_RXDP);
+
+	/*
+	 * Reset the device and wait until success
+	 */
+	ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL);
+
+	/* Wait at least 128 PCI clocks */
+	udelay(15);
+
+	if (ah->ah_version == AR5K_AR5210) {
+		val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA
+			| AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY;
+		mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA
+			| AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY;
+	} else {
+		val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
+		mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
+	}
+
+	ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false);
+
+	/*
+	 * Reset configuration register (for hw byte-swap). Note that this
+	 * is only set for big endian. We do the necessary magic in
+	 * AR5K_INIT_CFG.
+	 */
+	if ((val & AR5K_RESET_CTL_PCU) == 0)
+		ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG);
+
+	return ret;
+}
+
+/*
+ * Sleep control
+ */
+int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
+		bool set_chip, u16 sleep_duration)
+{
+	unsigned int i;
+	u32 staid, data;
+
+	ATH5K_TRACE(ah->ah_sc);
+	staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1);
+
+	switch (mode) {
+	case AR5K_PM_AUTO:
+		staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA;
+		/* fallthrough */
+	case AR5K_PM_NETWORK_SLEEP:
+		if (set_chip)
+			ath5k_hw_reg_write(ah,
+				AR5K_SLEEP_CTL_SLE_ALLOW |
+				sleep_duration,
+				AR5K_SLEEP_CTL);
+
+		staid |= AR5K_STA_ID1_PWR_SV;
+		break;
+
+	case AR5K_PM_FULL_SLEEP:
+		if (set_chip)
+			ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP,
+				AR5K_SLEEP_CTL);
+
+		staid |= AR5K_STA_ID1_PWR_SV;
+		break;
+
+	case AR5K_PM_AWAKE:
+
+		staid &= ~AR5K_STA_ID1_PWR_SV;
+
+		if (!set_chip)
+			goto commit;
+
+		/* Preserve sleep duration */
+		data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL);
+		if (data & 0xffc00000)
+			data = 0;
+		else
+			data = data & 0xfffcffff;
+
+		ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
+		udelay(15);
+
+		for (i = 50; i > 0; i--) {
+			/* Check if the chip did wake up */
+			if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) &
+					AR5K_PCICFG_SPWR_DN) == 0)
+				break;
+
+			/* Wait a bit and retry */
+			udelay(200);
+			ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
+		}
+
+		/* Fail if the chip didn't wake up */
+		if (i <= 0)
+			return -EIO;
+
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+commit:
+	ah->ah_power_mode = mode;
+	ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1);
+
+	return 0;
+}
+
+/*
+ * Bring up MAC + PHY Chips
+ */
+int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
+{
+	struct pci_dev *pdev = ah->ah_sc->pdev;
+	u32 turbo, mode, clock, bus_flags;
+	int ret;
+
+	turbo = 0;
+	mode = 0;
+	clock = 0;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	/* Wakeup the device */
+	ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+	if (ret) {
+		ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n");
+		return ret;
+	}
+
+	if (ah->ah_version != AR5K_AR5210) {
+		/*
+		 * Get channel mode flags
+		 */
+
+		if (ah->ah_radio >= AR5K_RF5112) {
+			mode = AR5K_PHY_MODE_RAD_RF5112;
+			clock = AR5K_PHY_PLL_RF5112;
+		} else {
+			mode = AR5K_PHY_MODE_RAD_RF5111;	/*Zero*/
+			clock = AR5K_PHY_PLL_RF5111;		/*Zero*/
+		}
+
+		if (flags & CHANNEL_2GHZ) {
+			mode |= AR5K_PHY_MODE_FREQ_2GHZ;
+			clock |= AR5K_PHY_PLL_44MHZ;
+
+			if (flags & CHANNEL_CCK) {
+				mode |= AR5K_PHY_MODE_MOD_CCK;
+			} else if (flags & CHANNEL_OFDM) {
+				/* XXX Dynamic OFDM/CCK is not supported by the
+				 * AR5211 so we set MOD_OFDM for plain g (no
+				 * CCK headers) operation. We need to test
+				 * this, 5211 might support ofdm-only g after
+				 * all, there are also initial register values
+				 * in the code for g mode (see initvals.c). */
+				if (ah->ah_version == AR5K_AR5211)
+					mode |= AR5K_PHY_MODE_MOD_OFDM;
+				else
+					mode |= AR5K_PHY_MODE_MOD_DYN;
+			} else {
+				ATH5K_ERR(ah->ah_sc,
+					"invalid radio modulation mode\n");
+				return -EINVAL;
+			}
+		} else if (flags & CHANNEL_5GHZ) {
+			mode |= AR5K_PHY_MODE_FREQ_5GHZ;
+			clock |= AR5K_PHY_PLL_40MHZ;
+
+			if (flags & CHANNEL_OFDM)
+				mode |= AR5K_PHY_MODE_MOD_OFDM;
+			else {
+				ATH5K_ERR(ah->ah_sc,
+					"invalid radio modulation mode\n");
+				return -EINVAL;
+			}
+		} else {
+			ATH5K_ERR(ah->ah_sc, "invalid radio frequency mode\n");
+			return -EINVAL;
+		}
+
+		if (flags & CHANNEL_TURBO)
+			turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT;
+	} else { /* Reset the device */
+
+		/* ...enable Atheros turbo mode if requested */
+		if (flags & CHANNEL_TURBO)
+			ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE,
+					AR5K_PHY_TURBO);
+	}
+
+	/* reseting PCI on PCI-E cards results card to hang
+	 * and always return 0xffff... so we ingore that flag
+	 * for PCI-E cards */
+	bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI;
+
+	/* Reset chipset */
+	if (ah->ah_version == AR5K_AR5210) {
+		ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+			AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
+			AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
+			mdelay(2);
+	} else {
+		ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+			AR5K_RESET_CTL_BASEBAND | bus_flags);
+	}
+	if (ret) {
+		ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n");
+		return -EIO;
+	}
+
+	/* ...wakeup again!*/
+	ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+	if (ret) {
+		ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n");
+		return ret;
+	}
+
+	/* ...final warm reset */
+	if (ath5k_hw_nic_reset(ah, 0)) {
+		ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n");
+		return -EIO;
+	}
+
+	if (ah->ah_version != AR5K_AR5210) {
+		/* ...set the PHY operating mode */
+		ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL);
+		udelay(300);
+
+		ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE);
+		ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO);
+	}
+
+	return 0;
+}
+
+/*
+ * Main reset function
+ */
+int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
+	struct ieee80211_channel *channel, bool change_channel)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	struct pci_dev *pdev = ah->ah_sc->pdev;
+	u32 data, s_seq, s_ant, s_led[3], dma_size;
+	unsigned int i, mode, freq, ee_mode, ant[2];
+	int ret;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	s_seq = 0;
+	s_ant = 0;
+	ee_mode = 0;
+	freq = 0;
+	mode = 0;
+
+	/*
+	 * Save some registers before a reset
+	 */
+	/*DCU/Antenna selection not available on 5210*/
+	if (ah->ah_version != AR5K_AR5210) {
+		if (change_channel) {
+			/* Seq number for queue 0 -do this for all queues ? */
+			s_seq = ath5k_hw_reg_read(ah,
+					AR5K_QUEUE_DFS_SEQNUM(0));
+			/*Default antenna*/
+			s_ant = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA);
+		}
+	}
+
+	/*GPIOs*/
+	s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) & AR5K_PCICFG_LEDSTATE;
+	s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR);
+	s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO);
+
+	if (change_channel && ah->ah_rf_banks != NULL)
+		ath5k_hw_get_rf_gain(ah);
+
+
+	/*Wakeup the device*/
+	ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false);
+	if (ret)
+		return ret;
+
+	/*
+	 * Initialize operating mode
+	 */
+	ah->ah_op_mode = op_mode;
+
+	/*
+	 * 5111/5112 Settings
+	 * 5210 only comes with RF5110
+	 */
+	if (ah->ah_version != AR5K_AR5210) {
+		if (ah->ah_radio != AR5K_RF5111 &&
+			ah->ah_radio != AR5K_RF5112 &&
+			ah->ah_radio != AR5K_RF5413 &&
+			ah->ah_radio != AR5K_RF2413 &&
+			ah->ah_radio != AR5K_RF2425) {
+			ATH5K_ERR(ah->ah_sc,
+				"invalid phy radio: %u\n", ah->ah_radio);
+			return -EINVAL;
+		}
+
+		switch (channel->hw_value & CHANNEL_MODES) {
+		case CHANNEL_A:
+			mode = AR5K_MODE_11A;
+			freq = AR5K_INI_RFGAIN_5GHZ;
+			ee_mode = AR5K_EEPROM_MODE_11A;
+			break;
+		case CHANNEL_G:
+			mode = AR5K_MODE_11G;
+			freq = AR5K_INI_RFGAIN_2GHZ;
+			ee_mode = AR5K_EEPROM_MODE_11G;
+			break;
+		case CHANNEL_B:
+			mode = AR5K_MODE_11B;
+			freq = AR5K_INI_RFGAIN_2GHZ;
+			ee_mode = AR5K_EEPROM_MODE_11B;
+			break;
+		case CHANNEL_T:
+			mode = AR5K_MODE_11A_TURBO;
+			freq = AR5K_INI_RFGAIN_5GHZ;
+			ee_mode = AR5K_EEPROM_MODE_11A;
+			break;
+		/*Is this ok on 5211 too ?*/
+		case CHANNEL_TG:
+			mode = AR5K_MODE_11G_TURBO;
+			freq = AR5K_INI_RFGAIN_2GHZ;
+			ee_mode = AR5K_EEPROM_MODE_11G;
+			break;
+		case CHANNEL_XR:
+			if (ah->ah_version == AR5K_AR5211) {
+				ATH5K_ERR(ah->ah_sc,
+					"XR mode not available on 5211");
+				return -EINVAL;
+			}
+			mode = AR5K_MODE_XR;
+			freq = AR5K_INI_RFGAIN_5GHZ;
+			ee_mode = AR5K_EEPROM_MODE_11A;
+			break;
+		default:
+			ATH5K_ERR(ah->ah_sc,
+				"invalid channel: %d\n", channel->center_freq);
+			return -EINVAL;
+		}
+
+		/* PHY access enable */
+		ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
+
+	}
+
+	ret = ath5k_hw_write_initvals(ah, mode, change_channel);
+	if (ret)
+		return ret;
+
+	/*
+	 * 5211/5212 Specific
+	 */
+	if (ah->ah_version != AR5K_AR5210) {
+		/*
+		 * Write initial RF gain settings
+		 * This should work for both 5111/5112
+		 */
+		ret = ath5k_hw_rfgain(ah, freq);
+		if (ret)
+			return ret;
+
+		mdelay(1);
+
+		/*
+		 * Write some more initial register settings
+		 */
+		if (ah->ah_version == AR5K_AR5212) {
+			ath5k_hw_reg_write(ah, 0x0002a002, 0x982c);
+
+			if (channel->hw_value == CHANNEL_G)
+				if (ah->ah_mac_srev < AR5K_SREV_AR2413)
+					ath5k_hw_reg_write(ah, 0x00f80d80,
+								0x994c);
+				else if (ah->ah_mac_srev < AR5K_SREV_AR5424)
+					ath5k_hw_reg_write(ah, 0x00380140,
+								0x994c);
+				else if (ah->ah_mac_srev < AR5K_SREV_AR2425)
+					ath5k_hw_reg_write(ah, 0x00fc0ec0,
+								0x994c);
+				else /* 2425 */
+					ath5k_hw_reg_write(ah, 0x00fc0fc0,
+								0x994c);
+			else
+				ath5k_hw_reg_write(ah, 0x00000000, 0x994c);
+
+			/* Some bits are disabled here, we know nothing about
+			 * register 0xa228 yet, most of the times this ends up
+			 * with a value 0x9b5 -haven't seen any dump with
+			 * a different value- */
+			/* Got this from decompiling binary HAL */
+			data = ath5k_hw_reg_read(ah, 0xa228);
+			data &= 0xfffffdff;
+			ath5k_hw_reg_write(ah, data, 0xa228);
+
+			data = ath5k_hw_reg_read(ah, 0xa228);
+			data &= 0xfffe03ff;
+			ath5k_hw_reg_write(ah, data, 0xa228);
+			data = 0;
+
+			/* Just write 0x9b5 ? */
+			/* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */
+			ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK);
+			ath5k_hw_reg_write(ah, 0x00000000, 0xa254);
+			ath5k_hw_reg_write(ah, 0x0000000e, AR5K_PHY_SCAL);
+		}
+
+		/* Fix for first revision of the RF5112 RF chipset */
+		if (ah->ah_radio >= AR5K_RF5112 &&
+				ah->ah_radio_5ghz_revision <
+				AR5K_SREV_RAD_5112A) {
+			ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD,
+					AR5K_PHY_CCKTXCTL);
+			if (channel->hw_value & CHANNEL_5GHZ)
+				data = 0xffb81020;
+			else
+				data = 0xffb80d20;
+			ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL);
+			data = 0;
+		}
+
+		/*
+		 * Set TX power (FIXME)
+		 */
+		ret = ath5k_hw_txpower(ah, channel, AR5K_TUNE_DEFAULT_TXPOWER);
+		if (ret)
+			return ret;
+
+		/* Write rate duration table only on AR5212 and if
+		 * virtual interface has already been brought up
+		 * XXX: rethink this after new mode changes to
+		 * mac80211 are integrated */
+		if (ah->ah_version == AR5K_AR5212 &&
+			ah->ah_sc->vif != NULL)
+			ath5k_hw_write_rate_duration(ah, mode);
+
+		/*
+		 * Write RF registers
+		 */
+		ret = ath5k_hw_rfregs(ah, channel, mode);
+		if (ret)
+			return ret;
+
+		/*
+		 * Configure additional registers
+		 */
+
+		/* Write OFDM timings on 5212*/
+		if (ah->ah_version == AR5K_AR5212 &&
+			channel->hw_value & CHANNEL_OFDM) {
+			ret = ath5k_hw_write_ofdm_timings(ah, channel);
+			if (ret)
+				return ret;
+		}
+
+		/*Enable/disable 802.11b mode on 5111
+		(enable 2111 frequency converter + CCK)*/
+		if (ah->ah_radio == AR5K_RF5111) {
+			if (mode == AR5K_MODE_11B)
+				AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG,
+				    AR5K_TXCFG_B_MODE);
+			else
+				AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
+				    AR5K_TXCFG_B_MODE);
+		}
+
+		/*
+		 * Set channel and calibrate the PHY
+		 */
+		ret = ath5k_hw_channel(ah, channel);
+		if (ret)
+			return ret;
+
+		/* Set antenna mode */
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_ANT_CTL,
+			ah->ah_antenna[ee_mode][0], 0xfffffc06);
+
+		/*
+		 * In case a fixed antenna was set as default
+		 * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE
+		 * registers.
+		 */
+		if (s_ant != 0) {
+			if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */
+				ant[0] = ant[1] = AR5K_ANT_FIXED_A;
+			else	/* 2 - Aux */
+				ant[0] = ant[1] = AR5K_ANT_FIXED_B;
+		} else {
+			ant[0] = AR5K_ANT_FIXED_A;
+			ant[1] = AR5K_ANT_FIXED_B;
+		}
+
+		ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]],
+			AR5K_PHY_ANT_SWITCH_TABLE_0);
+		ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]],
+			AR5K_PHY_ANT_SWITCH_TABLE_1);
+
+		/* Commit values from EEPROM */
+		if (ah->ah_radio == AR5K_RF5111)
+			AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL,
+			    AR5K_PHY_FRAME_CTL_TX_CLIP, ee->ee_tx_clip);
+
+		ath5k_hw_reg_write(ah,
+			AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]),
+			AR5K_PHY_NFTHRES);
+
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_SETTLING,
+			(ee->ee_switch_settling[ee_mode] << 7) & 0x3f80,
+			0xffffc07f);
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_GAIN,
+			(ee->ee_ant_tx_rx[ee_mode] << 12) & 0x3f000,
+			0xfffc0fff);
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_DESIRED_SIZE,
+			(ee->ee_adc_desired_size[ee_mode] & 0x00ff) |
+			((ee->ee_pga_desired_size[ee_mode] << 8) & 0xff00),
+			0xffff0000);
+
+		ath5k_hw_reg_write(ah,
+			(ee->ee_tx_end2xpa_disable[ee_mode] << 24) |
+			(ee->ee_tx_end2xpa_disable[ee_mode] << 16) |
+			(ee->ee_tx_frm2xpa_enable[ee_mode] << 8) |
+			(ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4);
+
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_RF_CTL3,
+			ee->ee_tx_end2xlna_enable[ee_mode] << 8, 0xffff00ff);
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_NF,
+			(ee->ee_thr_62[ee_mode] << 12) & 0x7f000, 0xfff80fff);
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_OFDM_SELFCORR, 4, 0xffffff01);
+
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
+		    AR5K_PHY_IQ_CORR_ENABLE |
+		    (ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) |
+		    ee->ee_q_cal[ee_mode]);
+
+		if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
+			AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ,
+				AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX,
+				ee->ee_margin_tx_rx[ee_mode]);
+
+	} else {
+		mdelay(1);
+		/* Disable phy and wait */
+		ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT);
+		mdelay(1);
+	}
+
+	/*
+	 * Restore saved values
+	 */
+	/*DCU/Antenna selection not available on 5210*/
+	if (ah->ah_version != AR5K_AR5210) {
+		ath5k_hw_reg_write(ah, s_seq, AR5K_QUEUE_DFS_SEQNUM(0));
+		ath5k_hw_reg_write(ah, s_ant, AR5K_DEFAULT_ANTENNA);
+	}
+	AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]);
+	ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR);
+	ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO);
+
+	/*
+	 * Misc
+	 */
+	/* XXX: add ah->aid once mac80211 gives this to us */
+	ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+
+	ath5k_hw_set_opmode(ah);
+	/*PISR/SISR Not available on 5210*/
+	if (ah->ah_version != AR5K_AR5210) {
+		ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR);
+		/* If we later allow tuning for this, store into sc structure */
+		data = AR5K_TUNE_RSSI_THRES |
+			AR5K_TUNE_BMISS_THRES << AR5K_RSSI_THR_BMISS_S;
+		ath5k_hw_reg_write(ah, data, AR5K_RSSI_THR);
+	}
+
+	/*
+	 * Set Rx/Tx DMA Configuration
+	 *
+	 * Set maximum DMA size (512) except for PCI-E cards since
+	 * it causes rx overruns and tx errors (tested on 5424 but since
+	 * rx overruns also occur on 5416/5418 with madwifi we set 128
+	 * for all PCI-E cards to be safe).
+	 *
+	 * In dumps this is 128 for allchips.
+	 *
+	 * XXX: need to check 5210 for this
+	 * TODO: Check out tx triger level, it's always 64 on dumps but I
+	 * guess we can tweak it and see how it goes ;-)
+	 */
+	dma_size = (pdev->is_pcie) ? AR5K_DMASIZE_128B : AR5K_DMASIZE_512B;
+	if (ah->ah_version != AR5K_AR5210) {
+		AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
+			AR5K_TXCFG_SDMAMR, dma_size);
+		AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG,
+			AR5K_RXCFG_SDMAMW, dma_size);
+	}
+
+	/*
+	 * Enable the PHY and wait until completion
+	 */
+	ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
+
+	/*
+	 * On 5211+ read activation -> rx delay
+	 * and use it.
+	 */
+	if (ah->ah_version != AR5K_AR5210) {
+		data = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
+			AR5K_PHY_RX_DELAY_M;
+		data = (channel->hw_value & CHANNEL_CCK) ?
+			((data << 2) / 22) : (data / 10);
+
+		udelay(100 + (2 * data));
+		data = 0;
+	} else {
+		mdelay(1);
+	}
+
+	/*
+	 * Perform ADC test (?)
+	 */
+	data = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
+	ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
+	for (i = 0; i <= 20; i++) {
+		if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
+			break;
+		udelay(200);
+	}
+	ath5k_hw_reg_write(ah, data, AR5K_PHY_TST1);
+	data = 0;
+
+	/*
+	 * Start automatic gain calibration
+	 *
+	 * During AGC calibration RX path is re-routed to
+	 * a signal detector so we don't receive anything.
+	 *
+	 * This method is used to calibrate some static offsets
+	 * used together with on-the fly I/Q calibration (the
+	 * one performed via ath5k_hw_phy_calibrate), that doesn't
+	 * interrupt rx path.
+	 *
+	 * If we are in a noisy environment AGC calibration may time
+	 * out.
+	 */
+	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+				AR5K_PHY_AGCCTL_CAL);
+
+	/* At the same time start I/Q calibration for QAM constellation
+	 * -no need for CCK- */
+	ah->ah_calibration = false;
+	if (!(mode == AR5K_MODE_11B)) {
+		ah->ah_calibration = true;
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
+				AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
+				AR5K_PHY_IQ_RUN);
+	}
+
+	/* Wait for gain calibration to finish (we check for I/Q calibration
+	 * during ath5k_phy_calibrate) */
+	if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
+			AR5K_PHY_AGCCTL_CAL, 0, false)) {
+		ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n",
+			channel->center_freq);
+		return -EAGAIN;
+	}
+
+	/*
+	 * Start noise floor calibration
+	 *
+	 * If we run NF calibration before AGC, it always times out.
+	 * Binary HAL starts NF and AGC calibration at the same time
+	 * and only waits for AGC to finish. I believe that's wrong because
+	 * during NF calibration, rx path is also routed to a detector, so if
+	 * it doesn't finish we won't have RX.
+	 *
+	 * XXX: Find an interval that's OK for all cards...
+	 */
+	ret = ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
+	if (ret)
+		return ret;
+
+	/*
+	 * Reset queues and start beacon timers at the end of the reset routine
+	 */
+	for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) {
+		/*No QCU on 5210*/
+		if (ah->ah_version != AR5K_AR5210)
+			AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(i), i);
+
+		ret = ath5k_hw_reset_tx_queue(ah, i);
+		if (ret) {
+			ATH5K_ERR(ah->ah_sc,
+				"failed to reset TX queue #%d\n", i);
+			return ret;
+		}
+	}
+
+	/* Pre-enable interrupts on 5211/5212*/
+	if (ah->ah_version != AR5K_AR5210)
+		ath5k_hw_set_imr(ah, AR5K_INT_RX | AR5K_INT_TX |
+				AR5K_INT_FATAL);
+
+	/*
+	 * Set RF kill flags if supported by the device (read from the EEPROM)
+	 * Disable gpio_intr for now since it results system hang.
+	 * TODO: Handle this in ath5k_intr
+	 */
+#if 0
+	if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) {
+		ath5k_hw_set_gpio_input(ah, 0);
+		ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, 0);
+		if (ah->ah_gpio[0] == 0)
+			ath5k_hw_set_gpio_intr(ah, 0, 1);
+		else
+			ath5k_hw_set_gpio_intr(ah, 0, 0);
+	}
+#endif
+
+	/*
+	 * Set the 32MHz reference clock on 5212 phy clock sleep register
+	 *
+	 * TODO: Find out how to switch to external 32Khz clock to save power
+	 */
+	if (ah->ah_version == AR5K_AR5212) {
+		ath5k_hw_reg_write(ah, AR5K_PHY_SCR_32MHZ, AR5K_PHY_SCR);
+		ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT);
+		ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ, AR5K_PHY_SCAL);
+		ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK);
+		ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY);
+		ath5k_hw_reg_write(ah, ah->ah_phy_spending, AR5K_PHY_SPENDING);
+
+		data = ath5k_hw_reg_read(ah, AR5K_USEC_5211) & 0xffffc07f ;
+		data |= (ah->ah_phy_spending == AR5K_PHY_SPENDING_18) ?
+						0x00000f80 : 0x00001380 ;
+		ath5k_hw_reg_write(ah, data, AR5K_USEC_5211);
+		data = 0;
+	}
+
+	if (ah->ah_version == AR5K_AR5212) {
+		ath5k_hw_reg_write(ah, 0x000100aa, 0x8118);
+		ath5k_hw_reg_write(ah, 0x00003210, 0x811c);
+		ath5k_hw_reg_write(ah, 0x00000052, 0x8108);
+		if (ah->ah_mac_srev >= AR5K_SREV_AR2413)
+			ath5k_hw_reg_write(ah, 0x00000004, 0x8120);
+	}
+
+	/*
+	 * Disable beacons and reset the register
+	 */
+	AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE |
+			AR5K_BEACON_RESET_TSF);
+
+	return 0;
+}
+
+#undef _ATH5K_RESET