ath9k: Move ath9k specific RX code to driver

This patch relocates RX processing code from the
common module to ath9k. This reduces the size
of the common module which is also used by ath9k_htc.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 0 insertions, 264 deletions

diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c
index 7707341cd0d..27f9ae56f96 100644
--- a/drivers/net/wireless/ath/ath9k/common.c
+++ b/drivers/net/wireless/ath/ath9k/common.c
@@ -27,270 +27,6 @@ MODULE_AUTHOR("Atheros Communications");
 MODULE_DESCRIPTION("Shared library for Atheros wireless 802.11n LAN cards.");
 MODULE_LICENSE("Dual BSD/GPL");
 
-/* Common RX processing */
-
-/* Assumes you've already done the endian to CPU conversion */
-static bool ath9k_rx_accept(struct ath_common *common,
-			    struct sk_buff *skb,
-			    struct ieee80211_rx_status *rxs,
-			    struct ath_rx_status *rx_stats,
-			    bool *decrypt_error)
-{
-	struct ath_hw *ah = common->ah;
-	struct ieee80211_hdr *hdr;
-	__le16 fc;
-
-	hdr = (struct ieee80211_hdr *) skb->data;
-	fc = hdr->frame_control;
-
-	if (!rx_stats->rs_datalen)
-		return false;
-        /*
-         * rs_status follows rs_datalen so if rs_datalen is too large
-         * we can take a hint that hardware corrupted it, so ignore
-         * those frames.
-         */
-	if (rx_stats->rs_datalen > common->rx_bufsize)
-		return false;
-
-	/*
-	 * rs_more indicates chained descriptors which can be used
-	 * to link buffers together for a sort of scatter-gather
-	 * operation.
-	 * reject the frame, we don't support scatter-gather yet and
-	 * the frame is probably corrupt anyway
-	 */
-	if (rx_stats->rs_more)
-		return false;
-
-	/*
-	 * The rx_stats->rs_status will not be set until the end of the
-	 * chained descriptors so it can be ignored if rs_more is set. The
-	 * rs_more will be false at the last element of the chained
-	 * descriptors.
-	 */
-	if (rx_stats->rs_status != 0) {
-		if (rx_stats->rs_status & ATH9K_RXERR_CRC)
-			rxs->flag |= RX_FLAG_FAILED_FCS_CRC;
-		if (rx_stats->rs_status & ATH9K_RXERR_PHY)
-			return false;
-
-		if (rx_stats->rs_status & ATH9K_RXERR_DECRYPT) {
-			*decrypt_error = true;
-		} else if (rx_stats->rs_status & ATH9K_RXERR_MIC) {
-			if (ieee80211_is_ctl(fc))
-				/*
-				 * Sometimes, we get invalid
-				 * MIC failures on valid control frames.
-				 * Remove these mic errors.
-				 */
-				rx_stats->rs_status &= ~ATH9K_RXERR_MIC;
-			else
-				rxs->flag |= RX_FLAG_MMIC_ERROR;
-		}
-		/*
-		 * Reject error frames with the exception of
-		 * decryption and MIC failures. For monitor mode,
-		 * we also ignore the CRC error.
-		 */
-		if (ah->opmode == NL80211_IFTYPE_MONITOR) {
-			if (rx_stats->rs_status &
-			    ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC |
-			      ATH9K_RXERR_CRC))
-				return false;
-		} else {
-			if (rx_stats->rs_status &
-			    ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC)) {
-				return false;
-			}
-		}
-	}
-	return true;
-}
-
-static int ath9k_process_rate(struct ath_common *common,
-			      struct ieee80211_hw *hw,
-			      struct ath_rx_status *rx_stats,
-			      struct ieee80211_rx_status *rxs,
-			      struct sk_buff *skb)
-{
-	struct ieee80211_supported_band *sband;
-	enum ieee80211_band band;
-	unsigned int i = 0;
-
-	band = hw->conf.channel->band;
-	sband = hw->wiphy->bands[band];
-
-	if (rx_stats->rs_rate & 0x80) {
-		/* HT rate */
-		rxs->flag |= RX_FLAG_HT;
-		if (rx_stats->rs_flags & ATH9K_RX_2040)
-			rxs->flag |= RX_FLAG_40MHZ;
-		if (rx_stats->rs_flags & ATH9K_RX_GI)
-			rxs->flag |= RX_FLAG_SHORT_GI;
-		rxs->rate_idx = rx_stats->rs_rate & 0x7f;
-		return 0;
-	}
-
-	for (i = 0; i < sband->n_bitrates; i++) {
-		if (sband->bitrates[i].hw_value == rx_stats->rs_rate) {
-			rxs->rate_idx = i;
-			return 0;
-		}
-		if (sband->bitrates[i].hw_value_short == rx_stats->rs_rate) {
-			rxs->flag |= RX_FLAG_SHORTPRE;
-			rxs->rate_idx = i;
-			return 0;
-		}
-	}
-
-	/*
-	 * No valid hardware bitrate found -- we should not get here
-	 * because hardware has already validated this frame as OK.
-	 */
-	ath_print(common, ATH_DBG_XMIT, "unsupported hw bitrate detected "
-		  "0x%02x using 1 Mbit\n", rx_stats->rs_rate);
-	if ((common->debug_mask & ATH_DBG_XMIT))
-		print_hex_dump_bytes("", DUMP_PREFIX_NONE, skb->data, skb->len);
-
-	return -EINVAL;
-}
-
-static void ath9k_process_rssi(struct ath_common *common,
-			       struct ieee80211_hw *hw,
-			       struct sk_buff *skb,
-			       struct ath_rx_status *rx_stats)
-{
-	struct ath_hw *ah = common->ah;
-	struct ieee80211_sta *sta;
-	struct ieee80211_hdr *hdr;
-	struct ath_node *an;
-	int last_rssi = ATH_RSSI_DUMMY_MARKER;
-	__le16 fc;
-
-	hdr = (struct ieee80211_hdr *)skb->data;
-	fc = hdr->frame_control;
-
-	rcu_read_lock();
-	/*
-	 * XXX: use ieee80211_find_sta! This requires quite a bit of work
-	 * under the current ath9k virtual wiphy implementation as we have
-	 * no way of tying a vif to wiphy. Typically vifs are attached to
-	 * at least one sdata of a wiphy on mac80211 but with ath9k virtual
-	 * wiphy you'd have to iterate over every wiphy and each sdata.
-	 */
-	sta = ieee80211_find_sta_by_hw(hw, hdr->addr2);
-	if (sta) {
-		an = (struct ath_node *) sta->drv_priv;
-		if (rx_stats->rs_rssi != ATH9K_RSSI_BAD &&
-		   !rx_stats->rs_moreaggr)
-			ATH_RSSI_LPF(an->last_rssi, rx_stats->rs_rssi);
-		last_rssi = an->last_rssi;
-	}
-	rcu_read_unlock();
-
-	if (likely(last_rssi != ATH_RSSI_DUMMY_MARKER))
-		rx_stats->rs_rssi = ATH_EP_RND(last_rssi,
-					      ATH_RSSI_EP_MULTIPLIER);
-	if (rx_stats->rs_rssi < 0)
-		rx_stats->rs_rssi = 0;
-
-	/* Update Beacon RSSI, this is used by ANI. */
-	if (ieee80211_is_beacon(fc))
-		ah->stats.avgbrssi = rx_stats->rs_rssi;
-}
-
-/*
- * For Decrypt or Demic errors, we only mark packet status here and always push
- * up the frame up to let mac80211 handle the actual error case, be it no
- * decryption key or real decryption error. This let us keep statistics there.
- */
-int ath9k_cmn_rx_skb_preprocess(struct ath_common *common,
-				struct ieee80211_hw *hw,
-				struct sk_buff *skb,
-				struct ath_rx_status *rx_stats,
-				struct ieee80211_rx_status *rx_status,
-				bool *decrypt_error)
-{
-	struct ath_hw *ah = common->ah;
-
-	memset(rx_status, 0, sizeof(struct ieee80211_rx_status));
-
-	/*
-	 * everything but the rate is checked here, the rate check is done
-	 * separately to avoid doing two lookups for a rate for each frame.
-	 */
-	if (!ath9k_rx_accept(common, skb, rx_status, rx_stats, decrypt_error))
-		return -EINVAL;
-
-	ath9k_process_rssi(common, hw, skb, rx_stats);
-
-	if (ath9k_process_rate(common, hw, rx_stats, rx_status, skb))
-		return -EINVAL;
-
-	rx_status->mactime = ath9k_hw_extend_tsf(ah, rx_stats->rs_tstamp);
-	rx_status->band = hw->conf.channel->band;
-	rx_status->freq = hw->conf.channel->center_freq;
-	rx_status->signal = ATH_DEFAULT_NOISE_FLOOR + rx_stats->rs_rssi;
-	rx_status->antenna = rx_stats->rs_antenna;
-	rx_status->flag |= RX_FLAG_TSFT;
-
-	return 0;
-}
-EXPORT_SYMBOL(ath9k_cmn_rx_skb_preprocess);
-
-void ath9k_cmn_rx_skb_postprocess(struct ath_common *common,
-				  struct sk_buff *skb,
-				  struct ath_rx_status *rx_stats,
-				  struct ieee80211_rx_status *rxs,
-				  bool decrypt_error)
-{
-	struct ath_hw *ah = common->ah;
-	struct ieee80211_hdr *hdr;
-	int hdrlen, padpos, padsize;
-	u8 keyix;
-	__le16 fc;
-
-	/* see if any padding is done by the hw and remove it */
-	hdr = (struct ieee80211_hdr *) skb->data;
-	hdrlen = ieee80211_get_hdrlen_from_skb(skb);
-	fc = hdr->frame_control;
-	padpos = ath9k_cmn_padpos(hdr->frame_control);
-
-	/* The MAC header is padded to have 32-bit boundary if the
-	 * packet payload is non-zero. The general calculation for
-	 * padsize would take into account odd header lengths:
-	 * padsize = (4 - padpos % 4) % 4; However, since only
-	 * even-length headers are used, padding can only be 0 or 2
-	 * bytes and we can optimize this a bit. In addition, we must
-	 * not try to remove padding from short control frames that do
-	 * not have payload. */
-	padsize = padpos & 3;
-	if (padsize && skb->len>=padpos+padsize+FCS_LEN) {
-		memmove(skb->data + padsize, skb->data, padpos);
-		skb_pull(skb, padsize);
-	}
-
-	keyix = rx_stats->rs_keyix;
-
-	if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error &&
-	    ieee80211_has_protected(fc)) {
-		rxs->flag |= RX_FLAG_DECRYPTED;
-	} else if (ieee80211_has_protected(fc)
-		   && !decrypt_error && skb->len >= hdrlen + 4) {
-		keyix = skb->data[hdrlen + 3] >> 6;
-
-		if (test_bit(keyix, common->keymap))
-			rxs->flag |= RX_FLAG_DECRYPTED;
-	}
-	if (ah->sw_mgmt_crypto &&
-	    (rxs->flag & RX_FLAG_DECRYPTED) &&
-	    ieee80211_is_mgmt(fc))
-		/* Use software decrypt for management frames. */
-		rxs->flag &= ~RX_FLAG_DECRYPTED;
-}
-EXPORT_SYMBOL(ath9k_cmn_rx_skb_postprocess);
-
 int ath9k_cmn_padpos(__le16 frame_control)
 {
 	int padpos = 24;