diff options
| author | Rajkumar Manoharan <rmanohar@qca.qualcomm.com> | 2012-03-15 05:34:26 +0530 |
|---|---|---|
| committer | John W. Linville <linville@tuxdriver.com> | 2012-04-09 16:05:52 -0400 |
| commit | 54da20d83f0e7fe87b75aec44bc2b1448d119320 (patch) | |
| tree | aee471dfdc06698c83ce38b563e4926a5838bb0c /drivers/net/wireless/ath/ath9k/ar5008_phy.c | |
| parent | 7dd30d447b7f4a129586cce8e57d0163dde876b0 (diff) | |
ath9k_hw: improve ANI processing and rx desensitizing parameters
This patch improves ANI operations by switching among the immunity
levels based on PHY errors and beacon rssi which will adjust receiver
desensitizing parameters. The changes are
* Configure the Weak Signal Detection based on current immunity value.
* At highest OFDM immunity level poor performance was observed with
strong interference. By tuning the FIR step and spur immunity levels
and not changing any weak signal detection thresholds at any level
helped to improve the performance.
* ANI took long time to recover back to lower immunity levels on heavy
data load. As the listen time got reset to zero before reaching to
the 5x of aniperiod, the immunity level is not lowering back even
without any interference. This patch fix that.
Cc: Paul Stewart <pstew@google.com>
Cc: Susinder Gulasekaran <susinder@qca.qualcomm.com>
Signed-off-by: Suresh Chandrasekaran <csuresh@qca.qualcomm.com>
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/ar5008_phy.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/ar5008_phy.c | 38 |
1 files changed, 0 insertions, 38 deletions
diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c index d7d8e919914..52ff5caf2d0 100644 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c @@ -1047,46 +1047,8 @@ static bool ar5008_hw_ani_control_old(struct ath_hw *ah, break; } case ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION:{ - static const int m1ThreshLow[] = { 127, 50 }; - static const int m2ThreshLow[] = { 127, 40 }; - static const int m1Thresh[] = { 127, 0x4d }; - static const int m2Thresh[] = { 127, 0x40 }; - static const int m2CountThr[] = { 31, 16 }; - static const int m2CountThrLow[] = { 63, 48 }; u32 on = param ? 1 : 0; - REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW, - AR_PHY_SFCORR_LOW_M1_THRESH_LOW, - m1ThreshLow[on]); - REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW, - AR_PHY_SFCORR_LOW_M2_THRESH_LOW, - m2ThreshLow[on]); - REG_RMW_FIELD(ah, AR_PHY_SFCORR, - AR_PHY_SFCORR_M1_THRESH, - m1Thresh[on]); - REG_RMW_FIELD(ah, AR_PHY_SFCORR, - AR_PHY_SFCORR_M2_THRESH, - m2Thresh[on]); - REG_RMW_FIELD(ah, AR_PHY_SFCORR, - AR_PHY_SFCORR_M2COUNT_THR, - m2CountThr[on]); - REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW, - AR_PHY_SFCORR_LOW_M2COUNT_THR_LOW, - m2CountThrLow[on]); - - REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT, - AR_PHY_SFCORR_EXT_M1_THRESH_LOW, - m1ThreshLow[on]); - REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT, - AR_PHY_SFCORR_EXT_M2_THRESH_LOW, - m2ThreshLow[on]); - REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT, - AR_PHY_SFCORR_EXT_M1_THRESH, - m1Thresh[on]); - REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT, - AR_PHY_SFCORR_EXT_M2_THRESH, - m2Thresh[on]); - if (on) REG_SET_BIT(ah, AR_PHY_SFCORR_LOW, AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW); |