Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 622 insertions, 0 deletions

diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
new file mode 100644
index 00000000000..fbf53af6cda
--- /dev/null
+++ b/drivers/net/wireless/airo_cs.c
@@ -0,0 +1,622 @@
+/*======================================================================
+
+    Aironet driver for 4500 and 4800 series cards
+
+    This code is released under both the GPL version 2 and BSD licenses.
+    Either license may be used.  The respective licenses are found at
+    the end of this file.
+
+    This code was developed by Benjamin Reed <breed@users.sourceforge.net>
+    including portions of which come from the Aironet PC4500
+    Developer's Reference Manual and used with permission.  Copyright
+    (C) 1999 Benjamin Reed.  All Rights Reserved.  Permission to use
+    code in the Developer's manual was granted for this driver by
+    Aironet.
+
+    In addition this module was derived from dummy_cs.
+    The initial developer of dummy_cs is David A. Hinds
+    <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+    are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.    
+    
+======================================================================*/
+
+#include <linux/config.h>
+#ifdef __IN_PCMCIA_PACKAGE__
+#include <pcmcia/k_compat.h>
+#endif
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/netdevice.h>
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ds.h>
+
+#include <asm/io.h>
+#include <asm/system.h>
+
+/*
+   All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
+   you do not define PCMCIA_DEBUG at all, all the debug code will be
+   left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
+   be present but disabled -- but it can then be enabled for specific
+   modules at load time with a 'pc_debug=#' option to insmod.
+*/
+#ifdef PCMCIA_DEBUG
+static int pc_debug = PCMCIA_DEBUG;
+module_param(pc_debug, int, 0);
+static char *version = "$Revision: 1.2 $";
+#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
+#else
+#define DEBUG(n, args...)
+#endif
+
+/*====================================================================*/
+
+MODULE_AUTHOR("Benjamin Reed");
+MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet \
+                   cards.  This is the module that links the PCMCIA card \
+		   with the airo module.");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340 PCMCIA cards");
+
+/*====================================================================*/
+
+/*
+   The event() function is this driver's Card Services event handler.
+   It will be called by Card Services when an appropriate card status
+   event is received.  The config() and release() entry points are
+   used to configure or release a socket, in response to card
+   insertion and ejection events.  They are invoked from the airo_cs
+   event handler. 
+*/
+
+struct net_device *init_airo_card( int, int, int, struct device * );
+void stop_airo_card( struct net_device *, int );
+int reset_airo_card( struct net_device * );
+
+static void airo_config(dev_link_t *link);
+static void airo_release(dev_link_t *link);
+static int airo_event(event_t event, int priority,
+		       event_callback_args_t *args);
+
+/*
+   The attach() and detach() entry points are used to create and destroy
+   "instances" of the driver, where each instance represents everything
+   needed to manage one actual PCMCIA card.
+*/
+
+static dev_link_t *airo_attach(void);
+static void airo_detach(dev_link_t *);
+
+/*
+   You'll also need to prototype all the functions that will actually
+   be used to talk to your device.  See 'pcmem_cs' for a good example
+   of a fully self-sufficient driver; the other drivers rely more or
+   less on other parts of the kernel.
+*/
+
+/*
+   The dev_info variable is the "key" that is used to match up this
+   device driver with appropriate cards, through the card configuration
+   database.
+*/
+
+static dev_info_t dev_info = "airo_cs";
+
+/*
+   A linked list of "instances" of the  aironet device.  Each actual
+   PCMCIA card corresponds to one device instance, and is described
+   by one dev_link_t structure (defined in ds.h).
+
+   You may not want to use a linked list for this -- for example, the
+   memory card driver uses an array of dev_link_t pointers, where minor
+   device numbers are used to derive the corresponding array index.
+*/
+
+static dev_link_t *dev_list = NULL;
+
+/*
+   A dev_link_t structure has fields for most things that are needed
+   to keep track of a socket, but there will usually be some device
+   specific information that also needs to be kept track of.  The
+   'priv' pointer in a dev_link_t structure can be used to point to
+   a device-specific private data structure, like this.
+
+   A driver needs to provide a dev_node_t structure for each device
+   on a card.  In some cases, there is only one device per card (for
+   example, ethernet cards, modems).  In other cases, there may be
+   many actual or logical devices (SCSI adapters, memory cards with
+   multiple partitions).  The dev_node_t structures need to be kept
+   in a linked list starting at the 'dev' field of a dev_link_t
+   structure.  We allocate them in the card's private data structure,
+   because they generally shouldn't be allocated dynamically.
+
+   In this case, we also provide a flag to indicate if a device is
+   "stopped" due to a power management event, or card ejection.  The
+   device IO routines can use a flag like this to throttle IO to a
+   card that is not ready to accept it.
+*/
+   
+typedef struct local_info_t {
+	dev_node_t	node;
+	struct net_device *eth_dev;
+} local_info_t;
+
+/*======================================================================
+  
+  airo_attach() creates an "instance" of the driver, allocating
+  local data structures for one device.  The device is registered
+  with Card Services.
+  
+  The dev_link structure is initialized, but we don't actually
+  configure the card at this point -- we wait until we receive a
+  card insertion event.
+  
+  ======================================================================*/
+
+static dev_link_t *airo_attach(void)
+{
+	client_reg_t client_reg;
+	dev_link_t *link;
+	local_info_t *local;
+	int ret;
+	
+	DEBUG(0, "airo_attach()\n");
+
+	/* Initialize the dev_link_t structure */
+	link = kmalloc(sizeof(struct dev_link_t), GFP_KERNEL);
+	if (!link) {
+		printk(KERN_ERR "airo_cs: no memory for new device\n");
+		return NULL;
+	}
+	memset(link, 0, sizeof(struct dev_link_t));
+	
+	/* Interrupt setup */
+	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+	link->irq.Handler = NULL;
+	
+	/*
+	  General socket configuration defaults can go here.  In this
+	  client, we assume very little, and rely on the CIS for almost
+	  everything.  In most clients, many details (i.e., number, sizes,
+	  and attributes of IO windows) are fixed by the nature of the
+	  device, and can be hard-wired here.
+	*/
+	link->conf.Attributes = 0;
+	link->conf.Vcc = 50;
+	link->conf.IntType = INT_MEMORY_AND_IO;
+	
+	/* Allocate space for private device-specific data */
+	local = kmalloc(sizeof(local_info_t), GFP_KERNEL);
+	if (!local) {
+		printk(KERN_ERR "airo_cs: no memory for new device\n");
+		kfree (link);
+		return NULL;
+	}
+	memset(local, 0, sizeof(local_info_t));
+	link->priv = local;
+	
+	/* Register with Card Services */
+	link->next = dev_list;
+	dev_list = link;
+	client_reg.dev_info = &dev_info;
+	client_reg.EventMask =
+		CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
+		CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
+		CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
+	client_reg.event_handler = &airo_event;
+	client_reg.Version = 0x0210;
+	client_reg.event_callback_args.client_data = link;
+	ret = pcmcia_register_client(&link->handle, &client_reg);
+	if (ret != 0) {
+		cs_error(link->handle, RegisterClient, ret);
+		airo_detach(link);
+		return NULL;
+	}
+	
+	return link;
+} /* airo_attach */
+
+/*======================================================================
+  
+  This deletes a driver "instance".  The device is de-registered
+  with Card Services.  If it has been released, all local data
+  structures are freed.  Otherwise, the structures will be freed
+  when the device is released.
+  
+  ======================================================================*/
+
+static void airo_detach(dev_link_t *link)
+{
+	dev_link_t **linkp;
+	
+	DEBUG(0, "airo_detach(0x%p)\n", link);
+	
+	/* Locate device structure */
+	for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
+		if (*linkp == link) break;
+	if (*linkp == NULL)
+		return;
+	
+	if (link->state & DEV_CONFIG)
+		airo_release(link);
+	
+	if ( ((local_info_t*)link->priv)->eth_dev ) {
+		stop_airo_card( ((local_info_t*)link->priv)->eth_dev, 0 );
+	}
+	((local_info_t*)link->priv)->eth_dev = NULL;   
+	
+	/* Break the link with Card Services */
+	if (link->handle)
+		pcmcia_deregister_client(link->handle);
+	
+	
+	
+	/* Unlink device structure, free pieces */
+	*linkp = link->next;
+	if (link->priv) {
+		kfree(link->priv);
+	}
+	kfree(link);
+	
+} /* airo_detach */
+
+/*======================================================================
+  
+  airo_config() is scheduled to run after a CARD_INSERTION event
+  is received, to configure the PCMCIA socket, and to make the
+  device available to the system.
+  
+  ======================================================================*/
+
+#define CS_CHECK(fn, ret) \
+do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+
+static void airo_config(dev_link_t *link)
+{
+	client_handle_t handle;
+	tuple_t tuple;
+	cisparse_t parse;
+	local_info_t *dev;
+	int last_fn, last_ret;
+	u_char buf[64];
+	win_req_t req;
+	memreq_t map;
+	
+	handle = link->handle;
+	dev = link->priv;
+
+	DEBUG(0, "airo_config(0x%p)\n", link);
+	
+	/*
+	  This reads the card's CONFIG tuple to find its configuration
+	  registers.
+	*/
+	tuple.DesiredTuple = CISTPL_CONFIG;
+	tuple.Attributes = 0;
+	tuple.TupleData = buf;
+	tuple.TupleDataMax = sizeof(buf);
+	tuple.TupleOffset = 0;
+	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+	CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
+	CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
+	link->conf.ConfigBase = parse.config.base;
+	link->conf.Present = parse.config.rmask[0];
+	
+	/* Configure card */
+	link->state |= DEV_CONFIG;
+	
+	/*
+	  In this loop, we scan the CIS for configuration table entries,
+	  each of which describes a valid card configuration, including
+	  voltage, IO window, memory window, and interrupt settings.
+	  
+	  We make no assumptions about the card to be configured: we use
+	  just the information available in the CIS.  In an ideal world,
+	  this would work for any PCMCIA card, but it requires a complete
+	  and accurate CIS.  In practice, a driver usually "knows" most of
+	  these things without consulting the CIS, and most client drivers
+	  will only use the CIS to fill in implementation-defined details.
+	*/
+	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+	while (1) {
+		cistpl_cftable_entry_t dflt = { 0 };
+		cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
+		if (pcmcia_get_tuple_data(handle, &tuple) != 0 ||
+				pcmcia_parse_tuple(handle, &tuple, &parse) != 0)
+			goto next_entry;
+		
+		if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
+		if (cfg->index == 0) goto next_entry;
+		link->conf.ConfigIndex = cfg->index;
+		
+		/* Does this card need audio output? */
+		if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+			link->conf.Attributes |= CONF_ENABLE_SPKR;
+			link->conf.Status = CCSR_AUDIO_ENA;
+		}
+		
+		/* Use power settings for Vcc and Vpp if present */
+		/*  Note that the CIS values need to be rescaled */
+		if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM))
+			link->conf.Vcc = cfg->vcc.param[CISTPL_POWER_VNOM]/10000;
+		else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM))
+			link->conf.Vcc = dflt.vcc.param[CISTPL_POWER_VNOM]/10000;
+		
+		if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
+			link->conf.Vpp1 = link->conf.Vpp2 =
+				cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
+		else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
+			link->conf.Vpp1 = link->conf.Vpp2 =
+				dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
+		
+		/* Do we need to allocate an interrupt? */
+		if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
+			link->conf.Attributes |= CONF_ENABLE_IRQ;
+		
+		/* IO window settings */
+		link->io.NumPorts1 = link->io.NumPorts2 = 0;
+		if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
+			cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
+			link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+			if (!(io->flags & CISTPL_IO_8BIT))
+				link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+			if (!(io->flags & CISTPL_IO_16BIT))
+				link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+			link->io.BasePort1 = io->win[0].base;
+			link->io.NumPorts1 = io->win[0].len;
+			if (io->nwin > 1) {
+				link->io.Attributes2 = link->io.Attributes1;
+				link->io.BasePort2 = io->win[1].base;
+				link->io.NumPorts2 = io->win[1].len;
+			}
+		}
+		
+		/* This reserves IO space but doesn't actually enable it */
+		if (pcmcia_request_io(link->handle, &link->io) != 0)
+			goto next_entry;
+		
+		/*
+		  Now set up a common memory window, if needed.  There is room
+		  in the dev_link_t structure for one memory window handle,
+		  but if the base addresses need to be saved, or if multiple
+		  windows are needed, the info should go in the private data
+		  structure for this device.
+		  
+		  Note that the memory window base is a physical address, and
+		  needs to be mapped to virtual space with ioremap() before it
+		  is used.
+		*/
+		if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) {
+			cistpl_mem_t *mem =
+				(cfg->mem.nwin) ? &cfg->mem : &dflt.mem;
+			req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
+			req.Base = mem->win[0].host_addr;
+			req.Size = mem->win[0].len;
+			req.AccessSpeed = 0;
+			if (pcmcia_request_window(&link->handle, &req, &link->win) != 0)
+				goto next_entry;
+			map.Page = 0; map.CardOffset = mem->win[0].card_addr;
+			if (pcmcia_map_mem_page(link->win, &map) != 0)
+				goto next_entry;
+		}
+		/* If we got this far, we're cool! */
+		break;
+		
+	next_entry:
+		CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(handle, &tuple));
+	}
+	
+    /*
+      Allocate an interrupt line.  Note that this does not assign a
+      handler to the interrupt, unless the 'Handler' member of the
+      irq structure is initialized.
+    */
+	if (link->conf.Attributes & CONF_ENABLE_IRQ)
+		CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq));
+	
+	/*
+	  This actually configures the PCMCIA socket -- setting up
+	  the I/O windows and the interrupt mapping, and putting the
+	  card and host interface into "Memory and IO" mode.
+	*/
+	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link->handle, &link->conf));
+	((local_info_t*)link->priv)->eth_dev = 
+		init_airo_card( link->irq.AssignedIRQ,
+				link->io.BasePort1, 1, &handle_to_dev(handle) );
+	if (!((local_info_t*)link->priv)->eth_dev) goto cs_failed;
+	
+	/*
+	  At this point, the dev_node_t structure(s) need to be
+	  initialized and arranged in a linked list at link->dev.
+	*/
+	strcpy(dev->node.dev_name, ((local_info_t*)link->priv)->eth_dev->name );
+	dev->node.major = dev->node.minor = 0;
+	link->dev = &dev->node;
+	
+	/* Finally, report what we've done */
+	printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d",
+	       dev->node.dev_name, link->conf.ConfigIndex,
+	       link->conf.Vcc/10, link->conf.Vcc%10);
+	if (link->conf.Vpp1)
+		printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
+	if (link->conf.Attributes & CONF_ENABLE_IRQ)
+		printk(", irq %d", link->irq.AssignedIRQ);
+	if (link->io.NumPorts1)
+		printk(", io 0x%04x-0x%04x", link->io.BasePort1,
+		       link->io.BasePort1+link->io.NumPorts1-1);
+	if (link->io.NumPorts2)
+		printk(" & 0x%04x-0x%04x", link->io.BasePort2,
+		       link->io.BasePort2+link->io.NumPorts2-1);
+	if (link->win)
+		printk(", mem 0x%06lx-0x%06lx", req.Base,
+		       req.Base+req.Size-1);
+	printk("\n");
+	
+	link->state &= ~DEV_CONFIG_PENDING;
+	return;
+	
+ cs_failed:
+	cs_error(link->handle, last_fn, last_ret);
+	airo_release(link);
+	
+} /* airo_config */
+
+/*======================================================================
+  
+  After a card is removed, airo_release() will unregister the
+  device, and release the PCMCIA configuration.  If the device is
+  still open, this will be postponed until it is closed.
+  
+  ======================================================================*/
+
+static void airo_release(dev_link_t *link)
+{
+	DEBUG(0, "airo_release(0x%p)\n", link);
+	
+	/* Unlink the device chain */
+	link->dev = NULL;
+	
+	/*
+	  In a normal driver, additional code may be needed to release
+	  other kernel data structures associated with this device. 
+	*/
+	
+	/* Don't bother checking to see if these succeed or not */
+	if (link->win)
+		pcmcia_release_window(link->win);
+	pcmcia_release_configuration(link->handle);
+	if (link->io.NumPorts1)
+		pcmcia_release_io(link->handle, &link->io);
+	if (link->irq.AssignedIRQ)
+		pcmcia_release_irq(link->handle, &link->irq);
+	link->state &= ~DEV_CONFIG;
+}
+
+/*======================================================================
+  
+  The card status event handler.  Mostly, this schedules other
+  stuff to run after an event is received.
+
+  When a CARD_REMOVAL event is received, we immediately set a
+  private flag to block future accesses to this device.  All the
+  functions that actually access the device should check this flag
+  to make sure the card is still present.
+  
+  ======================================================================*/
+
+static int airo_event(event_t event, int priority,
+		      event_callback_args_t *args)
+{
+	dev_link_t *link = args->client_data;
+	local_info_t *local = link->priv;
+	
+	DEBUG(1, "airo_event(0x%06x)\n", event);
+	
+	switch (event) {
+	case CS_EVENT_CARD_REMOVAL:
+		link->state &= ~DEV_PRESENT;
+		if (link->state & DEV_CONFIG) {
+			netif_device_detach(local->eth_dev);
+			airo_release(link);
+		}
+		break;
+	case CS_EVENT_CARD_INSERTION:
+		link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+		airo_config(link);
+		break;
+	case CS_EVENT_PM_SUSPEND:
+		link->state |= DEV_SUSPEND;
+		/* Fall through... */
+	case CS_EVENT_RESET_PHYSICAL:
+		if (link->state & DEV_CONFIG) {
+			netif_device_detach(local->eth_dev);
+			pcmcia_release_configuration(link->handle);
+		}
+		break;
+	case CS_EVENT_PM_RESUME:
+		link->state &= ~DEV_SUSPEND;
+		/* Fall through... */
+	case CS_EVENT_CARD_RESET:
+		if (link->state & DEV_CONFIG) {
+			pcmcia_request_configuration(link->handle, &link->conf);
+			reset_airo_card(local->eth_dev);
+			netif_device_attach(local->eth_dev);
+		}
+		break;
+	}
+	return 0;
+} /* airo_event */
+
+static struct pcmcia_driver airo_driver = {
+	.owner		= THIS_MODULE,
+	.drv		= {
+		.name	= "airo_cs",
+	},
+	.attach		= airo_attach,
+	.detach		= airo_detach,
+};
+
+static int airo_cs_init(void)
+{
+	return pcmcia_register_driver(&airo_driver);
+}
+
+static void airo_cs_cleanup(void)
+{
+	pcmcia_unregister_driver(&airo_driver);
+	BUG_ON(dev_list != NULL);
+}
+
+/*
+    This program is free software; you can redistribute it and/or
+    modify it under the terms of the GNU General Public License
+    as published by the Free Software Foundation; either version 2
+    of the License, or (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    In addition:
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+
+    1. Redistributions of source code must retain the above copyright
+       notice, this list of conditions and the following disclaimer.
+    2. Redistributions in binary form must reproduce the above copyright
+       notice, this list of conditions and the following disclaimer in the
+       documentation and/or other materials provided with the distribution.
+    3. The name of the author may not be used to endorse or promote
+       products derived from this software without specific prior written
+       permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+    IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+    ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+    INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+    SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+    HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+    STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+    IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+    POSSIBILITY OF SUCH DAMAGE.    
+*/
+
+module_init(airo_cs_init);
+module_exit(airo_cs_cleanup);