Remove unnecessary forward declarations from velocity NIC driver.

By moving functions to before their first call, we eliminate
the need to define forward references.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 1580 insertions, 1681 deletions

diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index d6a92b794f3..47be41a39d3 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -92,7 +92,6 @@ static int msglevel = MSG_LEVEL_INFO;
  *	Fetch the mask bits of the selected CAM and store them into the
  *	provided mask buffer.
  */
-
 static void mac_get_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
 {
 	int i;
@@ -121,7 +120,6 @@ static void mac_get_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
  *
  *	Store a new mask into a CAM
  */
-
 static void mac_set_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
 {
 	int i;
@@ -166,7 +164,6 @@ static void mac_set_vlan_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
  *
  *	Load an address or vlan tag into a CAM
  */
-
 static void mac_set_cam(struct mac_regs __iomem *regs, int idx, const u8 *addr)
 {
 	int i;
@@ -222,7 +219,6 @@ static void mac_set_vlan_cam(struct mac_regs __iomem *regs, int idx,
  *	reset the Wake on lan features. This function doesn't restore
  *	the rest of the logic from the result of sleep/wakeup
  */
-
 static void mac_wol_reset(struct mac_regs __iomem *regs)
 {
 
@@ -241,7 +237,6 @@ static void mac_wol_reset(struct mac_regs __iomem *regs)
 	writew(0xFFFF, &regs->WOLSRClr);
 }
 
-static int velocity_mii_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
 static const struct ethtool_ops velocity_ethtool_ops;
 
 /*
@@ -369,76 +364,14 @@ static int rx_copybreak = 200;
 module_param(rx_copybreak, int, 0644);
 MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames");
 
-static void velocity_init_info(struct pci_dev *pdev, struct velocity_info *vptr,
-			       const struct velocity_info_tbl *info);
-static int velocity_get_pci_info(struct velocity_info *, struct pci_dev *pdev);
-static void velocity_print_info(struct velocity_info *vptr);
-static int velocity_open(struct net_device *dev);
-static int velocity_change_mtu(struct net_device *dev, int mtu);
-static int velocity_xmit(struct sk_buff *skb, struct net_device *dev);
-static irqreturn_t velocity_intr(int irq, void *dev_instance);
-static void velocity_set_multi(struct net_device *dev);
-static struct net_device_stats *velocity_get_stats(struct net_device *dev);
-static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static int velocity_close(struct net_device *dev);
-static int velocity_receive_frame(struct velocity_info *, int idx);
-static int velocity_alloc_rx_buf(struct velocity_info *, int idx);
-static void velocity_free_rd_ring(struct velocity_info *vptr);
-static void velocity_free_tx_buf(struct velocity_info *vptr, struct velocity_td_info *);
-static int velocity_soft_reset(struct velocity_info *vptr);
-static void mii_init(struct velocity_info *vptr, u32 mii_status);
-static u32 velocity_get_link(struct net_device *dev);
-static u32 velocity_get_opt_media_mode(struct velocity_info *vptr);
-static void velocity_print_link_status(struct velocity_info *vptr);
-static void safe_disable_mii_autopoll(struct mac_regs __iomem *regs);
-static void velocity_shutdown(struct velocity_info *vptr);
-static void enable_flow_control_ability(struct velocity_info *vptr);
-static void enable_mii_autopoll(struct mac_regs __iomem *regs);
-static int velocity_mii_read(struct mac_regs __iomem *, u8 byIdx, u16 *pdata);
-static int velocity_mii_write(struct mac_regs __iomem *, u8 byMiiAddr, u16 data);
-static u32 mii_check_media_mode(struct mac_regs __iomem *regs);
-static u32 check_connection_type(struct mac_regs __iomem *regs);
-static int velocity_set_media_mode(struct velocity_info *vptr, u32 mii_status);
-
 #ifdef CONFIG_PM
-
-static int velocity_suspend(struct pci_dev *pdev, pm_message_t state);
-static int velocity_resume(struct pci_dev *pdev);
-
 static DEFINE_SPINLOCK(velocity_dev_list_lock);
 static LIST_HEAD(velocity_dev_list);
-
-#endif
-
-#if defined(CONFIG_PM) && defined(CONFIG_INET)
-
-static int velocity_netdev_event(struct notifier_block *nb, unsigned long notification, void *ptr);
-
-static struct notifier_block velocity_inetaddr_notifier = {
-      .notifier_call	= velocity_netdev_event,
-};
-
-static void velocity_register_notifier(void)
-{
-	register_inetaddr_notifier(&velocity_inetaddr_notifier);
-}
-
-static void velocity_unregister_notifier(void)
-{
-	unregister_inetaddr_notifier(&velocity_inetaddr_notifier);
-}
-
-#else
-
-#define velocity_register_notifier()	do {} while (0)
-#define velocity_unregister_notifier()	do {} while (0)
-
 #endif
 
 /*
  *	Internal board variants. At the moment we have only one
  */
-
 static struct velocity_info_tbl chip_info_table[] = {
 	{CHIP_TYPE_VT6110, "VIA Networking Velocity Family Gigabit Ethernet Adapter", 1, 0x00FFFFFFUL},
 	{ }
@@ -448,7 +381,6 @@ static struct velocity_info_tbl chip_info_table[] = {
  *	Describe the PCI device identifiers that we support in this
  *	device driver. Used for hotplug autoloading.
  */
-
 static const struct pci_device_id velocity_id_table[] __devinitdata = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_612X) },
 	{ }
@@ -463,7 +395,6 @@ MODULE_DEVICE_TABLE(pci, velocity_id_table);
  *	Given a chip identifier return a suitable description. Returns
  *	a pointer a static string valid while the driver is loaded.
  */
-
 static const char __devinit *get_chip_name(enum chip_type chip_id)
 {
 	int i;
@@ -481,7 +412,6 @@ static const char __devinit *get_chip_name(enum chip_type chip_id)
  *	unload for each active device that is present. Disconnects
  *	the device from the network layer and frees all the resources
  */
-
 static void __devexit velocity_remove1(struct pci_dev *pdev)
 {
 	struct net_device *dev = pci_get_drvdata(pdev);
@@ -519,7 +449,6 @@ static void __devexit velocity_remove1(struct pci_dev *pdev)
  *	all the verification and checking as well as reporting so that
  *	we don't duplicate code for each option.
  */
-
 static void __devinit velocity_set_int_opt(int *opt, int val, int min, int max, int def, char *name, const char *devname)
 {
 	if (val == -1)
@@ -548,7 +477,6 @@ static void __devinit velocity_set_int_opt(int *opt, int val, int min, int max,
  *	all the verification and checking as well as reporting so that
  *	we don't duplicate code for each option.
  */
-
 static void __devinit velocity_set_bool_opt(u32 *opt, int val, int def, u32 flag, char *name, const char *devname)
 {
 	(*opt) &= (~flag);
@@ -574,7 +502,6 @@ static void __devinit velocity_set_bool_opt(u32 *opt, int val, int def, u32 flag
  *	Turn the module and command options into a single structure
  *	for the current device
  */
-
 static void __devinit velocity_get_options(struct velocity_opt *opts, int index, const char *devname)
 {
 
@@ -600,7 +527,6 @@ static void __devinit velocity_get_options(struct velocity_opt *opts, int index,
  *	Initialize the content addressable memory used for filters. Load
  *	appropriately according to the presence of VLAN
  */
-
 static void velocity_init_cam_filter(struct velocity_info *vptr)
 {
 	struct mac_regs __iomem *regs = vptr->mac_regs;
@@ -673,7 +599,6 @@ static void velocity_init_rx_ring_indexes(struct velocity_info *vptr)
  *	Reset the ownership and status for the receive ring side.
  *	Hand all the receive queue to the NIC.
  */
-
 static void velocity_rx_reset(struct velocity_info *vptr)
 {
 
@@ -695,6 +620,647 @@ static void velocity_rx_reset(struct velocity_info *vptr)
 }
 
 /**
+ *	velocity_get_opt_media_mode	-	get media selection
+ *	@vptr: velocity adapter
+ *
+ *	Get the media mode stored in EEPROM or module options and load
+ *	mii_status accordingly. The requested link state information
+ *	is also returned.
+ */
+static u32 velocity_get_opt_media_mode(struct velocity_info *vptr)
+{
+	u32 status = 0;
+
+	switch (vptr->options.spd_dpx) {
+	case SPD_DPX_AUTO:
+		status = VELOCITY_AUTONEG_ENABLE;
+		break;
+	case SPD_DPX_100_FULL:
+		status = VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL;
+		break;
+	case SPD_DPX_10_FULL:
+		status = VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL;
+		break;
+	case SPD_DPX_100_HALF:
+		status = VELOCITY_SPEED_100;
+		break;
+	case SPD_DPX_10_HALF:
+		status = VELOCITY_SPEED_10;
+		break;
+	}
+	vptr->mii_status = status;
+	return status;
+}
+
+/**
+ *	safe_disable_mii_autopoll	-	autopoll off
+ *	@regs: velocity registers
+ *
+ *	Turn off the autopoll and wait for it to disable on the chip
+ */
+static void safe_disable_mii_autopoll(struct mac_regs __iomem *regs)
+{
+	u16 ww;
+
+	/*  turn off MAUTO */
+	writeb(0, &regs->MIICR);
+	for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+		udelay(1);
+		if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, &regs->MIISR))
+			break;
+	}
+}
+
+/**
+ *	enable_mii_autopoll	-	turn on autopolling
+ *	@regs: velocity registers
+ *
+ *	Enable the MII link status autopoll feature on the Velocity
+ *	hardware. Wait for it to enable.
+ */
+static void enable_mii_autopoll(struct mac_regs __iomem *regs)
+{
+	int ii;
+
+	writeb(0, &(regs->MIICR));
+	writeb(MIIADR_SWMPL, &regs->MIIADR);
+
+	for (ii = 0; ii < W_MAX_TIMEOUT; ii++) {
+		udelay(1);
+		if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, &regs->MIISR))
+			break;
+	}
+
+	writeb(MIICR_MAUTO, &regs->MIICR);
+
+	for (ii = 0; ii < W_MAX_TIMEOUT; ii++) {
+		udelay(1);
+		if (!BYTE_REG_BITS_IS_ON(MIISR_MIDLE, &regs->MIISR))
+			break;
+	}
+
+}
+
+/**
+ *	velocity_mii_read	-	read MII data
+ *	@regs: velocity registers
+ *	@index: MII register index
+ *	@data: buffer for received data
+ *
+ *	Perform a single read of an MII 16bit register. Returns zero
+ *	on success or -ETIMEDOUT if the PHY did not respond.
+ */
+static int velocity_mii_read(struct mac_regs __iomem *regs, u8 index, u16 *data)
+{
+	u16 ww;
+
+	/*
+	 *	Disable MIICR_MAUTO, so that mii addr can be set normally
+	 */
+	safe_disable_mii_autopoll(regs);
+
+	writeb(index, &regs->MIIADR);
+
+	BYTE_REG_BITS_ON(MIICR_RCMD, &regs->MIICR);
+
+	for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+		if (!(readb(&regs->MIICR) & MIICR_RCMD))
+			break;
+	}
+
+	*data = readw(&regs->MIIDATA);
+
+	enable_mii_autopoll(regs);
+	if (ww == W_MAX_TIMEOUT)
+		return -ETIMEDOUT;
+	return 0;
+}
+
+
+/**
+ *	mii_check_media_mode	-	check media state
+ *	@regs: velocity registers
+ *
+ *	Check the current MII status and determine the link status
+ *	accordingly
+ */
+static u32 mii_check_media_mode(struct mac_regs __iomem *regs)
+{
+	u32 status = 0;
+	u16 ANAR;
+
+	if (!MII_REG_BITS_IS_ON(BMSR_LNK, MII_REG_BMSR, regs))
+		status |= VELOCITY_LINK_FAIL;
+
+	if (MII_REG_BITS_IS_ON(G1000CR_1000FD, MII_REG_G1000CR, regs))
+		status |= VELOCITY_SPEED_1000 | VELOCITY_DUPLEX_FULL;
+	else if (MII_REG_BITS_IS_ON(G1000CR_1000, MII_REG_G1000CR, regs))
+		status |= (VELOCITY_SPEED_1000);
+	else {
+		velocity_mii_read(regs, MII_REG_ANAR, &ANAR);
+		if (ANAR & ANAR_TXFD)
+			status |= (VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL);
+		else if (ANAR & ANAR_TX)
+			status |= VELOCITY_SPEED_100;
+		else if (ANAR & ANAR_10FD)
+			status |= (VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL);
+		else
+			status |= (VELOCITY_SPEED_10);
+	}
+
+	if (MII_REG_BITS_IS_ON(BMCR_AUTO, MII_REG_BMCR, regs)) {
+		velocity_mii_read(regs, MII_REG_ANAR, &ANAR);
+		if ((ANAR & (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10))
+		    == (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10)) {
+			if (MII_REG_BITS_IS_ON(G1000CR_1000 | G1000CR_1000FD, MII_REG_G1000CR, regs))
+				status |= VELOCITY_AUTONEG_ENABLE;
+		}
+	}
+
+	return status;
+}
+
+/**
+ *	velocity_mii_write	-	write MII data
+ *	@regs: velocity registers
+ *	@index: MII register index
+ *	@data: 16bit data for the MII register
+ *
+ *	Perform a single write to an MII 16bit register. Returns zero
+ *	on success or -ETIMEDOUT if the PHY did not respond.
+ */
+static int velocity_mii_write(struct mac_regs __iomem *regs, u8 mii_addr, u16 data)
+{
+	u16 ww;
+
+	/*
+	 *	Disable MIICR_MAUTO, so that mii addr can be set normally
+	 */
+	safe_disable_mii_autopoll(regs);
+
+	/* MII reg offset */
+	writeb(mii_addr, &regs->MIIADR);
+	/* set MII data */
+	writew(data, &regs->MIIDATA);
+
+	/* turn on MIICR_WCMD */
+	BYTE_REG_BITS_ON(MIICR_WCMD, &regs->MIICR);
+
+	/* W_MAX_TIMEOUT is the timeout period */
+	for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+		udelay(5);
+		if (!(readb(&regs->MIICR) & MIICR_WCMD))
+			break;
+	}
+	enable_mii_autopoll(regs);
+
+	if (ww == W_MAX_TIMEOUT)
+		return -ETIMEDOUT;
+	return 0;
+}
+
+/**
+ *	set_mii_flow_control	-	flow control setup
+ *	@vptr: velocity interface
+ *
+ *	Set up the flow control on this interface according to
+ *	the supplied user/eeprom options.
+ */
+static void set_mii_flow_control(struct velocity_info *vptr)
+{
+	/*Enable or Disable PAUSE in ANAR */
+	switch (vptr->options.flow_cntl) {
+	case FLOW_CNTL_TX:
+		MII_REG_BITS_OFF(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
+		MII_REG_BITS_ON(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
+		break;
+
+	case FLOW_CNTL_RX:
+		MII_REG_BITS_ON(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
+		MII_REG_BITS_ON(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
+		break;
+
+	case FLOW_CNTL_TX_RX:
+		MII_REG_BITS_ON(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
+		MII_REG_BITS_ON(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
+		break;
+
+	case FLOW_CNTL_DISABLE:
+		MII_REG_BITS_OFF(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
+		MII_REG_BITS_OFF(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
+		break;
+	default:
+		break;
+	}
+}
+
+/**
+ *	mii_set_auto_on		-	autonegotiate on
+ *	@vptr: velocity
+ *
+ *	Enable autonegotation on this interface
+ */
+static void mii_set_auto_on(struct velocity_info *vptr)
+{
+	if (MII_REG_BITS_IS_ON(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs))
+		MII_REG_BITS_ON(BMCR_REAUTO, MII_REG_BMCR, vptr->mac_regs);
+	else
+		MII_REG_BITS_ON(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs);
+}
+
+static u32 check_connection_type(struct mac_regs __iomem *regs)
+{
+	u32 status = 0;
+	u8 PHYSR0;
+	u16 ANAR;
+	PHYSR0 = readb(&regs->PHYSR0);
+
+	/*
+	   if (!(PHYSR0 & PHYSR0_LINKGD))
+	   status|=VELOCITY_LINK_FAIL;
+	 */
+
+	if (PHYSR0 & PHYSR0_FDPX)
+		status |= VELOCITY_DUPLEX_FULL;
+
+	if (PHYSR0 & PHYSR0_SPDG)
+		status |= VELOCITY_SPEED_1000;
+	else if (PHYSR0 & PHYSR0_SPD10)
+		status |= VELOCITY_SPEED_10;
+	else
+		status |= VELOCITY_SPEED_100;
+
+	if (MII_REG_BITS_IS_ON(BMCR_AUTO, MII_REG_BMCR, regs)) {
+		velocity_mii_read(regs, MII_REG_ANAR, &ANAR);
+		if ((ANAR & (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10))
+		    == (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10)) {
+			if (MII_REG_BITS_IS_ON(G1000CR_1000 | G1000CR_1000FD, MII_REG_G1000CR, regs))
+				status |= VELOCITY_AUTONEG_ENABLE;
+		}
+	}
+
+	return status;
+}
+
+
+
+/**
+ *	velocity_set_media_mode		-	set media mode
+ *	@mii_status: old MII link state
+ *
+ *	Check the media link state and configure the flow control
+ *	PHY and also velocity hardware setup accordingly. In particular
+ *	we need to set up CD polling and frame bursting.
+ */
+static int velocity_set_media_mode(struct velocity_info *vptr, u32 mii_status)
+{
+	u32 curr_status;
+	struct mac_regs __iomem *regs = vptr->mac_regs;
+
+	vptr->mii_status = mii_check_media_mode(vptr->mac_regs);
+	curr_status = vptr->mii_status & (~VELOCITY_LINK_FAIL);
+
+	/* Set mii link status */
+	set_mii_flow_control(vptr);
+
+	/*
+	   Check if new status is consisent with current status
+	   if (((mii_status & curr_status) & VELOCITY_AUTONEG_ENABLE)
+	   || (mii_status==curr_status)) {
+	   vptr->mii_status=mii_check_media_mode(vptr->mac_regs);
+	   vptr->mii_status=check_connection_type(vptr->mac_regs);
+	   VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity link no change\n");
+	   return 0;
+	   }
+	 */
+
+	if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201)
+		MII_REG_BITS_ON(AUXCR_MDPPS, MII_REG_AUXCR, vptr->mac_regs);
+
+	/*
+	 *	If connection type is AUTO
+	 */
+	if (mii_status & VELOCITY_AUTONEG_ENABLE) {
+		VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity is AUTO mode\n");
+		/* clear force MAC mode bit */
+		BYTE_REG_BITS_OFF(CHIPGCR_FCMODE, &regs->CHIPGCR);
+		/* set duplex mode of MAC according to duplex mode of MII */
+		MII_REG_BITS_ON(ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10, MII_REG_ANAR, vptr->mac_regs);
+		MII_REG_BITS_ON(G1000CR_1000FD | G1000CR_1000, MII_REG_G1000CR, vptr->mac_regs);
+		MII_REG_BITS_ON(BMCR_SPEED1G, MII_REG_BMCR, vptr->mac_regs);
+
+		/* enable AUTO-NEGO mode */
+		mii_set_auto_on(vptr);
+	} else {
+		u16 ANAR;
+		u8 CHIPGCR;
+
+		/*
+		 * 1. if it's 3119, disable frame bursting in halfduplex mode
+		 *    and enable it in fullduplex mode
+		 * 2. set correct MII/GMII and half/full duplex mode in CHIPGCR
+		 * 3. only enable CD heart beat counter in 10HD mode
+		 */
+
+		/* set force MAC mode bit */
+		BYTE_REG_BITS_ON(CHIPGCR_FCMODE, &regs->CHIPGCR);
+
+		CHIPGCR = readb(&regs->CHIPGCR);
+		CHIPGCR &= ~CHIPGCR_FCGMII;
+
+		if (mii_status & VELOCITY_DUPLEX_FULL) {
+			CHIPGCR |= CHIPGCR_FCFDX;
+			writeb(CHIPGCR, &regs->CHIPGCR);
+			VELOCITY_PRT(MSG_LEVEL_INFO, "set Velocity to forced full mode\n");
+			if (vptr->rev_id < REV_ID_VT3216_A0)
+				BYTE_REG_BITS_OFF(TCR_TB2BDIS, &regs->TCR);
+		} else {
+			CHIPGCR &= ~CHIPGCR_FCFDX;
+			VELOCITY_PRT(MSG_LEVEL_INFO, "set Velocity to forced half mode\n");
+			writeb(CHIPGCR, &regs->CHIPGCR);
+			if (vptr->rev_id < REV_ID_VT3216_A0)
+				BYTE_REG_BITS_ON(TCR_TB2BDIS, &regs->TCR);
+		}
+
+		MII_REG_BITS_OFF(G1000CR_1000FD | G1000CR_1000, MII_REG_G1000CR, vptr->mac_regs);
+
+		if (!(mii_status & VELOCITY_DUPLEX_FULL) && (mii_status & VELOCITY_SPEED_10))
+			BYTE_REG_BITS_OFF(TESTCFG_HBDIS, &regs->TESTCFG);
+		else
+			BYTE_REG_BITS_ON(TESTCFG_HBDIS, &regs->TESTCFG);
+
+		/* MII_REG_BITS_OFF(BMCR_SPEED1G, MII_REG_BMCR, vptr->mac_regs); */
+		velocity_mii_read(vptr->mac_regs, MII_REG_ANAR, &ANAR);
+		ANAR &= (~(ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10));
+		if (mii_status & VELOCITY_SPEED_100) {
+			if (mii_status & VELOCITY_DUPLEX_FULL)
+				ANAR |= ANAR_TXFD;
+			else
+				ANAR |= ANAR_TX;
+		} else {
+			if (mii_status & VELOCITY_DUPLEX_FULL)
+				ANAR |= ANAR_10FD;
+			else
+				ANAR |= ANAR_10;
+		}
+		velocity_mii_write(vptr->mac_regs, MII_REG_ANAR, ANAR);
+		/* enable AUTO-NEGO mode */
+		mii_set_auto_on(vptr);
+		/* MII_REG_BITS_ON(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs); */
+	}
+	/* vptr->mii_status=mii_check_media_mode(vptr->mac_regs); */
+	/* vptr->mii_status=check_connection_type(vptr->mac_regs); */
+	return VELOCITY_LINK_CHANGE;
+}
+
+/**
+ *	velocity_print_link_status	-	link status reporting
+ *	@vptr: velocity to report on
+ *
+ *	Turn the link status of the velocity card into a kernel log
+ *	description of the new link state, detailing speed and duplex
+ *	status
+ */
+static void velocity_print_link_status(struct velocity_info *vptr)
+{
+
+	if (vptr->mii_status & VELOCITY_LINK_FAIL) {
+		VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: failed to detect cable link\n", vptr->dev->name);
+	} else if (vptr->options.spd_dpx == SPD_DPX_AUTO) {
+		VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: Link auto-negotiation", vptr->dev->name);
+
+		if (vptr->mii_status & VELOCITY_SPEED_1000)
+			VELOCITY_PRT(MSG_LEVEL_INFO, " speed 1000M bps");
+		else if (vptr->mii_status & VELOCITY_SPEED_100)
+			VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps");
+		else
+			VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps");
+
+		if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
+			VELOCITY_PRT(MSG_LEVEL_INFO, " full duplex\n");
+		else
+			VELOCITY_PRT(MSG_LEVEL_INFO, " half duplex\n");
+	} else {
+		VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: Link forced", vptr->dev->name);
+		switch (vptr->options.spd_dpx) {
+		case SPD_DPX_100_HALF:
+			VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps half duplex\n");
+			break;
+		case SPD_DPX_100_FULL:
+			VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps full duplex\n");
+			break;
+		case SPD_DPX_10_HALF:
+			VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps half duplex\n");
+			break;
+		case SPD_DPX_10_FULL:
+			VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps full duplex\n");
+			break;
+		default:
+			break;
+		}
+	}
+}
+
+/**
+ *	enable_flow_control_ability	-	flow control
+ *	@vptr: veloity to configure
+ *
+ *	Set up flow control according to the flow control options
+ *	determined by the eeprom/configuration.
+ */
+static void enable_flow_control_ability(struct velocity_info *vptr)
+{
+
+	struct mac_regs __iomem *regs = vptr->mac_regs;
+
+	switch (vptr->options.flow_cntl) {
+
+	case FLOW_CNTL_DEFAULT:
+		if (BYTE_REG_BITS_IS_ON(PHYSR0_RXFLC, &regs->PHYSR0))
+			writel(CR0_FDXRFCEN, &regs->CR0Set);
+		else
+			writel(CR0_FDXRFCEN, &regs->CR0Clr);
+
+		if (BYTE_REG_BITS_IS_ON(PHYSR0_TXFLC, &regs->PHYSR0))
+			writel(CR0_FDXTFCEN, &regs->CR0Set);
+		else
+			writel(CR0_FDXTFCEN, &regs->CR0Clr);
+		break;
+
+	case FLOW_CNTL_TX:
+		writel(CR0_FDXTFCEN, &regs->CR0Set);
+		writel(CR0_FDXRFCEN, &regs->CR0Clr);
+		break;
+
+	case FLOW_CNTL_RX:
+		writel(CR0_FDXRFCEN, &regs->CR0Set);
+		writel(CR0_FDXTFCEN, &regs->CR0Clr);
+		break;
+
+	case FLOW_CNTL_TX_RX:
+		writel(CR0_FDXTFCEN, &regs->CR0Set);
+		writel(CR0_FDXRFCEN, &regs->CR0Set);
+		break;
+
+	case FLOW_CNTL_DISABLE:
+		writel(CR0_FDXRFCEN, &regs->CR0Clr);
+		writel(CR0_FDXTFCEN, &regs->CR0Clr);
+		break;
+
+	default:
+		break;
+	}
+
+}
+
+/**
+ *	velocity_soft_reset	-	soft reset
+ *	@vptr: velocity to reset
+ *
+ *	Kick off a soft reset of the velocity adapter and then poll
+ *	until the reset sequence has completed before returning.
+ */
+static int velocity_soft_reset(struct velocity_info *vptr)
+{
+	struct mac_regs __iomem *regs = vptr->mac_regs;
+	int i = 0;
+
+	writel(CR0_SFRST, &regs->CR0Set);
+
+	for (i = 0; i < W_MAX_TIMEOUT; i++) {
+		udelay(5);
+		if (!DWORD_REG_BITS_IS_ON(CR0_SFRST, &regs->CR0Set))
+			break;
+	}
+
+	if (i == W_MAX_TIMEOUT) {
+		writel(CR0_FORSRST, &regs->CR0Set);
+		/* FIXME: PCI POSTING */
+		/* delay 2ms */
+		mdelay(2);
+	}
+	return 0;
+}
+
+/**
+ *	velocity_set_multi	-	filter list change callback
+ *	@dev: network device
+ *
+ *	Called by the network layer when the filter lists need to change
+ *	for a velocity adapter. Reload the CAMs with the new address
+ *	filter ruleset.
+ */
+static void velocity_set_multi(struct net_device *dev)
+{
+	struct velocity_info *vptr = netdev_priv(dev);
+	struct mac_regs __iomem *regs = vptr->mac_regs;
+	u8 rx_mode;
+	int i;
+	struct dev_mc_list *mclist;
+
+	if (dev->flags & IFF_PROMISC) {	/* Set promiscuous. */
+		writel(0xffffffff, &regs->MARCAM[0]);
+		writel(0xffffffff, &regs->MARCAM[4]);
+		rx_mode = (RCR_AM | RCR_AB | RCR_PROM);
+	} else if ((dev->mc_count > vptr->multicast_limit)
+		   || (dev->flags & IFF_ALLMULTI)) {
+		writel(0xffffffff, &regs->MARCAM[0]);
+		writel(0xffffffff, &regs->MARCAM[4]);
+		rx_mode = (RCR_AM | RCR_AB);
+	} else {
+		int offset = MCAM_SIZE - vptr->multicast_limit;
+		mac_get_cam_mask(regs, vptr->mCAMmask);
+
+		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; i++, mclist = mclist->next) {
+			mac_set_cam(regs, i + offset, mclist->dmi_addr);
+			vptr->mCAMmask[(offset + i) / 8] |= 1 << ((offset + i) & 7);
+		}
+
+		mac_set_cam_mask(regs, vptr->mCAMmask);
+		rx_mode = RCR_AM | RCR_AB | RCR_AP;
+	}
+	if (dev->mtu > 1500)
+		rx_mode |= RCR_AL;
+
+	BYTE_REG_BITS_ON(rx_mode, &regs->RCR);
+
+}
+
+/*
+ * MII access , media link mode setting functions
+ */
+
+/**
+ *	mii_init	-	set up MII
+ *	@vptr: velocity adapter
+ *	@mii_status:  links tatus
+ *
+ *	Set up the PHY for the current link state.
+ */
+static void mii_init(struct velocity_info *vptr, u32 mii_status)
+{
+	u16 BMCR;
+
+	switch (PHYID_GET_PHY_ID(vptr->phy_id)) {
+	case PHYID_CICADA_CS8201:
+		/*
+		 *	Reset to hardware default
+		 */
+		MII_REG_BITS_OFF((ANAR_ASMDIR | ANAR_PAUSE), MII_REG_ANAR, vptr->mac_regs);
+		/*
+		 *	Turn on ECHODIS bit in NWay-forced full mode and turn it
+		 *	off it in NWay-forced half mode for NWay-forced v.s.
+		 *	legacy-forced issue.
+		 */
+		if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
+			MII_REG_BITS_ON(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
+		else
+			MII_REG_BITS_OFF(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
+		/*
+		 *	Turn on Link/Activity LED enable bit for CIS8201
+		 */
+		MII_REG_BITS_ON(PLED_LALBE, MII_REG_PLED, vptr->mac_regs);
+		break;
+	case PHYID_VT3216_32BIT:
+	case PHYID_VT3216_64BIT:
+		/*
+		 *	Reset to hardware default
+		 */
+		MII_REG_BITS_ON((ANAR_ASMDIR | ANAR_PAUSE), MII_REG_ANAR, vptr->mac_regs);
+		/*
+		 *	Turn on ECHODIS bit in NWay-forced full mode and turn it
+		 *	off it in NWay-forced half mode for NWay-forced v.s.
+		 *	legacy-forced issue
+		 */
+		if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
+			MII_REG_BITS_ON(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
+		else
+			MII_REG_BITS_OFF(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
+		break;
+
+	case PHYID_MARVELL_1000:
+	case PHYID_MARVELL_1000S:
+		/*
+		 *	Assert CRS on Transmit
+		 */
+		MII_REG_BITS_ON(PSCR_ACRSTX, MII_REG_PSCR, vptr->mac_regs);
+		/*
+		 *	Reset to hardware default
+		 */
+		MII_REG_BITS_ON((ANAR_ASMDIR | ANAR_PAUSE), MII_REG_ANAR, vptr->mac_regs);
+		break;
+	default:
+		;
+	}
+	velocity_mii_read(vptr->mac_regs, MII_REG_BMCR, &BMCR);
+	if (BMCR & BMCR_ISO) {
+		BMCR &= ~BMCR_ISO;
+		velocity_mii_write(vptr->mac_regs, MII_REG_BMCR, BMCR);
+	}
+}
+
+
+/**
  *	velocity_init_registers	-	initialise MAC registers
  *	@vptr: velocity to init
  *	@type: type of initialisation (hot or cold)
@@ -702,7 +1268,6 @@ static void velocity_rx_reset(struct velocity_info *vptr)
  *	Initialise the MAC on a reset or on first set up on the
  *	hardware.
  */
-
 static void velocity_init_registers(struct velocity_info *vptr,
 				    enum velocity_init_type type)
 {
@@ -818,288 +1383,29 @@ static void velocity_init_registers(struct velocity_info *vptr,
 	}
 }
 
-/**
- *	velocity_soft_reset	-	soft reset
- *	@vptr: velocity to reset
- *
- *	Kick off a soft reset of the velocity adapter and then poll
- *	until the reset sequence has completed before returning.
- */
-
-static int velocity_soft_reset(struct velocity_info *vptr)
+static void velocity_give_many_rx_descs(struct velocity_info *vptr)
 {
 	struct mac_regs __iomem *regs = vptr->mac_regs;
-	int i = 0;
-
-	writel(CR0_SFRST, &regs->CR0Set);
-
-	for (i = 0; i < W_MAX_TIMEOUT; i++) {
-		udelay(5);
-		if (!DWORD_REG_BITS_IS_ON(CR0_SFRST, &regs->CR0Set))
-			break;
-	}
-
-	if (i == W_MAX_TIMEOUT) {
-		writel(CR0_FORSRST, &regs->CR0Set);
-		/* FIXME: PCI POSTING */
-		/* delay 2ms */
-		mdelay(2);
-	}
-	return 0;
-}
-
-static const struct net_device_ops velocity_netdev_ops = {
-	.ndo_open		= velocity_open,
-	.ndo_stop		= velocity_close,
-	.ndo_start_xmit		= velocity_xmit,
-	.ndo_get_stats		= velocity_get_stats,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address 	= eth_mac_addr,
-	.ndo_set_multicast_list	= velocity_set_multi,
-	.ndo_change_mtu		= velocity_change_mtu,
-	.ndo_do_ioctl		= velocity_ioctl,
-	.ndo_vlan_rx_add_vid	= velocity_vlan_rx_add_vid,
-	.ndo_vlan_rx_kill_vid	= velocity_vlan_rx_kill_vid,
-	.ndo_vlan_rx_register	= velocity_vlan_rx_register,
-};
-
-/**
- *	velocity_found1		-	set up discovered velocity card
- *	@pdev: PCI device
- *	@ent: PCI device table entry that matched
- *
- *	Configure a discovered adapter from scratch. Return a negative
- *	errno error code on failure paths.
- */
-
-static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
-	static int first = 1;
-	struct net_device *dev;
-	int i;
-	const char *drv_string;
-	const struct velocity_info_tbl *info = &chip_info_table[ent->driver_data];
-	struct velocity_info *vptr;
-	struct mac_regs __iomem *regs;
-	int ret = -ENOMEM;
-
-	/* FIXME: this driver, like almost all other ethernet drivers,
-	 * can support more than MAX_UNITS.
-	 */
-	if (velocity_nics >= MAX_UNITS) {
-		dev_notice(&pdev->dev, "already found %d NICs.\n",
-			   velocity_nics);
-		return -ENODEV;
-	}
-
-	dev = alloc_etherdev(sizeof(struct velocity_info));
-	if (!dev) {
-		dev_err(&pdev->dev, "allocate net device failed.\n");
-		goto out;
-	}
-
-	/* Chain it all together */
-
-	SET_NETDEV_DEV(dev, &pdev->dev);
-	vptr = netdev_priv(dev);
-
-
-	if (first) {
-		printk(KERN_INFO "%s Ver. %s\n",
-			VELOCITY_FULL_DRV_NAM, VELOCITY_VERSION);
-		printk(KERN_INFO "Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.\n");
-		printk(KERN_INFO "Copyright (c) 2004 Red Hat Inc.\n");
-		first = 0;
-	}
-
-	velocity_init_info(pdev, vptr, info);
-
-	vptr->dev = dev;
-
-	dev->irq = pdev->irq;
-
-	ret = pci_enable_device(pdev);
-	if (ret < 0)
-		goto err_free_dev;
-
-	ret = velocity_get_pci_info(vptr, pdev);
-	if (ret < 0) {
-		/* error message already printed */
-		goto err_disable;
-	}
-
-	ret = pci_request_regions(pdev, VELOCITY_NAME);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "No PCI resources.\n");
-		goto err_disable;
-	}
-
-	regs = ioremap(vptr->memaddr, VELOCITY_IO_SIZE);
-	if (regs == NULL) {
-		ret = -EIO;
-		goto err_release_res;
-	}
-
-	vptr->mac_regs = regs;
-
-	mac_wol_reset(regs);
-
-	dev->base_addr = vptr->ioaddr;
-
-	for (i = 0; i < 6; i++)
-		dev->dev_addr[i] = readb(&regs->PAR[i]);
-
-
-	drv_string = dev_driver_string(&pdev->dev);
-
-	velocity_get_options(&vptr->options, velocity_nics, drv_string);
-
-	/*
-	 *	Mask out the options cannot be set to the chip
-	 */
-
-	vptr->options.flags &= info->flags;
+	int avail, dirty, unusable;
 
 	/*
-	 *	Enable the chip specified capbilities
+	 * RD number must be equal to 4X per hardware spec
+	 * (programming guide rev 1.20, p.13)
 	 */
+	if (vptr->rx.filled < 4)
+		return;
 
-	vptr->flags = vptr->options.flags | (info->flags & 0xFF000000UL);
-
-	vptr->wol_opts = vptr->options.wol_opts;
-	vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED;
-
-	vptr->phy_id = MII_GET_PHY_ID(vptr->mac_regs);
-
-	dev->irq = pdev->irq;
-	dev->netdev_ops = &velocity_netdev_ops;
-	dev->ethtool_ops = &velocity_ethtool_ops;
-
-	dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER |
-		NETIF_F_HW_VLAN_RX;
-
-	if (vptr->flags & VELOCITY_FLAGS_TX_CSUM)
-		dev->features |= NETIF_F_IP_CSUM;
-
-	ret = register_netdev(dev);
-	if (ret < 0)
-		goto err_iounmap;
-
-	if (!velocity_get_link(dev)) {
-		netif_carrier_off(dev);
-		vptr->mii_status |= VELOCITY_LINK_FAIL;
-	}
-
-	velocity_print_info(vptr);
-	pci_set_drvdata(pdev, dev);
-
-	/* and leave the chip powered down */
-
-	pci_set_power_state(pdev, PCI_D3hot);
-#ifdef CONFIG_PM
-	{
-		unsigned long flags;
-
-		spin_lock_irqsave(&velocity_dev_list_lock, flags);
-		list_add(&vptr->list, &velocity_dev_list);
-		spin_unlock_irqrestore(&velocity_dev_list_lock, flags);
-	}
-#endif
-	velocity_nics++;
-out:
-	return ret;
-
-err_iounmap:
-	iounmap(regs);
-err_release_res:
-	pci_release_regions(pdev);
-err_disable:
-	pci_disable_device(pdev);
-err_free_dev:
-	free_netdev(dev);
-	goto out;
-}
-
-/**
- *	velocity_print_info	-	per driver data
- *	@vptr: velocity
- *
- *	Print per driver data as the kernel driver finds Velocity
- *	hardware
- */
-
-static void __devinit velocity_print_info(struct velocity_info *vptr)
-{
-	struct net_device *dev = vptr->dev;
-
-	printk(KERN_INFO "%s: %s\n", dev->name, get_chip_name(vptr->chip_id));
-	printk(KERN_INFO "%s: Ethernet Address: %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
-		dev->name,
-		dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
-		dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
-}
-
-/**
- *	velocity_init_info	-	init private data
- *	@pdev: PCI device
- *	@vptr: Velocity info
- *	@info: Board type
- *
- *	Set up the initial velocity_info struct for the device that has been
- *	discovered.
- */
-
-static void __devinit velocity_init_info(struct pci_dev *pdev,
-					 struct velocity_info *vptr,
-					 const struct velocity_info_tbl *info)
-{
-	memset(vptr, 0, sizeof(struct velocity_info));
-
-	vptr->pdev = pdev;
-	vptr->chip_id = info->chip_id;
-	vptr->tx.numq = info->txqueue;
-	vptr->multicast_limit = MCAM_SIZE;
-	spin_lock_init(&vptr->lock);
-	INIT_LIST_HEAD(&vptr->list);
-}
-
-/**
- *	velocity_get_pci_info	-	retrieve PCI info for device
- *	@vptr: velocity device
- *	@pdev: PCI device it matches
- *
- *	Retrieve the PCI configuration space data that interests us from
- *	the kernel PCI layer
- */
-
-static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pci_dev *pdev)
-{
-	vptr->rev_id = pdev->revision;
-
-	pci_set_master(pdev);
-
-	vptr->ioaddr = pci_resource_start(pdev, 0);
-	vptr->memaddr = pci_resource_start(pdev, 1);
-
-	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) {
-		dev_err(&pdev->dev,
-			   "region #0 is not an I/O resource, aborting.\n");
-		return -EINVAL;
-	}
-
-	if ((pci_resource_flags(pdev, 1) & IORESOURCE_IO)) {
-		dev_err(&pdev->dev,
-			   "region #1 is an I/O resource, aborting.\n");