diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2009-06-18 14:07:15 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2009-06-18 14:07:15 -0700 |
commit | d2aa4550379f92e929af7ed1dd4f55e6a1e331f8 (patch) | |
tree | 5ef0fc69a507f0d701fd157b6652427eabd5efdd /drivers/net/ucc_geth.c | |
parent | 9e3e4b1d2d13bead8d52703c82a02b55f108b491 (diff) | |
parent | cb2107be43d2fc5eadec58b92b54bf32c00bfff3 (diff) |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (55 commits)
netxen: fix tx ring accounting
netxen: fix detection of cut-thru firmware mode
forcedeth: fix dma api mismatches
atm: sk_wmem_alloc initial value is one
net: correct off-by-one write allocations reports
via-velocity : fix no link detection on boot
Net / e100: Fix suspend of devices that cannot be power managed
TI DaVinci EMAC : Fix rmmod error
net: group address list and its count
ipv4: Fix fib_trie rebalancing, part 2
pkt_sched: Update drops stats in act_police
sky2: version 1.23
sky2: add GRO support
sky2: skb recycling
sky2: reduce default transmit ring
sky2: receive counter update
sky2: fix shutdown synchronization
sky2: PCI irq issues
sky2: more receive shutdown
sky2: turn off pause during shutdown
...
Manually fix trivial conflict in net/core/skbuff.c due to kmemcheck
Diffstat (limited to 'drivers/net/ucc_geth.c')
-rw-r--r-- | drivers/net/ucc_geth.c | 113 |
1 files changed, 46 insertions, 67 deletions
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index e2f2e91cfdd..40c6eba775c 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -65,8 +65,6 @@ static DEFINE_SPINLOCK(ugeth_lock); -static void uec_configure_serdes(struct net_device *dev); - static struct { u32 msg_enable; } debug = { -1 }; @@ -1536,6 +1534,49 @@ static void adjust_link(struct net_device *dev) spin_unlock_irqrestore(&ugeth->lock, flags); } +/* Initialize TBI PHY interface for communicating with the + * SERDES lynx PHY on the chip. We communicate with this PHY + * through the MDIO bus on each controller, treating it as a + * "normal" PHY at the address found in the UTBIPA register. We assume + * that the UTBIPA register is valid. Either the MDIO bus code will set + * it to a value that doesn't conflict with other PHYs on the bus, or the + * value doesn't matter, as there are no other PHYs on the bus. + */ +static void uec_configure_serdes(struct net_device *dev) +{ + struct ucc_geth_private *ugeth = netdev_priv(dev); + struct ucc_geth_info *ug_info = ugeth->ug_info; + struct phy_device *tbiphy; + + if (!ug_info->tbi_node) { + dev_warn(&dev->dev, "SGMII mode requires that the device " + "tree specify a tbi-handle\n"); + return; + } + + tbiphy = of_phy_find_device(ug_info->tbi_node); + if (!tbiphy) { + dev_err(&dev->dev, "error: Could not get TBI device\n"); + return; + } + + /* + * If the link is already up, we must already be ok, and don't need to + * configure and reset the TBI<->SerDes link. Maybe U-Boot configured + * everything for us? Resetting it takes the link down and requires + * several seconds for it to come back. + */ + if (phy_read(tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS) + return; + + /* Single clk mode, mii mode off(for serdes communication) */ + phy_write(tbiphy, ENET_TBI_MII_ANA, TBIANA_SETTINGS); + + phy_write(tbiphy, ENET_TBI_MII_TBICON, TBICON_CLK_SELECT); + + phy_write(tbiphy, ENET_TBI_MII_CR, TBICR_SETTINGS); +} + /* Configure the PHY for dev. * returns 0 if success. -1 if failure */ @@ -1577,41 +1618,7 @@ static int init_phy(struct net_device *dev) return 0; } -/* Initialize TBI PHY interface for communicating with the - * SERDES lynx PHY on the chip. We communicate with this PHY - * through the MDIO bus on each controller, treating it as a - * "normal" PHY at the address found in the UTBIPA register. We assume - * that the UTBIPA register is valid. Either the MDIO bus code will set - * it to a value that doesn't conflict with other PHYs on the bus, or the - * value doesn't matter, as there are no other PHYs on the bus. - */ -static void uec_configure_serdes(struct net_device *dev) -{ - struct ucc_geth_private *ugeth = netdev_priv(dev); - - if (!ugeth->tbiphy) { - printk(KERN_WARNING "SGMII mode requires that the device " - "tree specify a tbi-handle\n"); - return; - } - /* - * If the link is already up, we must already be ok, and don't need to - * configure and reset the TBI<->SerDes link. Maybe U-Boot configured - * everything for us? Resetting it takes the link down and requires - * several seconds for it to come back. - */ - if (phy_read(ugeth->tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS) - return; - - /* Single clk mode, mii mode off(for serdes communication) */ - phy_write(ugeth->tbiphy, ENET_TBI_MII_ANA, TBIANA_SETTINGS); - - phy_write(ugeth->tbiphy, ENET_TBI_MII_TBICON, TBICON_CLK_SELECT); - - phy_write(ugeth->tbiphy, ENET_TBI_MII_CR, TBICR_SETTINGS); - -} static int ugeth_graceful_stop_tx(struct ucc_geth_private *ugeth) { @@ -3711,6 +3718,9 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma } ug_info->phy_node = phy; + /* Find the TBI PHY node. If it's not there, we don't support SGMII */ + ug_info->tbi_node = of_parse_phandle(np, "tbi-handle", 0); + /* get the phy interface type, or default to MII */ prop = of_get_property(np, "phy-connection-type", NULL); if (!prop) { @@ -3818,37 +3828,6 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma ugeth->ndev = dev; ugeth->node = np; - /* Find the TBI PHY. If it's not there, we don't support SGMII */ - ph = of_get_property(np, "tbi-handle", NULL); - if (ph) { - struct device_node *tbi = of_find_node_by_phandle(*ph); - struct of_device *ofdev; - struct mii_bus *bus; - const unsigned int *id; - - if (!tbi) - return 0; - - mdio = of_get_parent(tbi); - if (!mdio) - return 0; - - ofdev = of_find_device_by_node(mdio); - - of_node_put(mdio); - - id = of_get_property(tbi, "reg", NULL); - if (!id) - return 0; - of_node_put(tbi); - - bus = dev_get_drvdata(&ofdev->dev); - if (!bus) - return 0; - - ugeth->tbiphy = bus->phy_map[*id]; - } - return 0; } |