PCI: Change all drivers to use pci_device->revision

Instead of all drivers reading pci config space to get the revision
ID, they can now use the pci_device->revision member.

This exposes some issues where drivers where reading a word or a dword
for the revision number, and adding useless error-handling around the
read. Some drivers even just read it for no purpose of all.

In devices where the revision ID is being copied over and used in what
appears to be the equivalent of hotpath, I have left the copy code
and the cached copy as not to influence the driver's performance.

Compile tested with make all{yes,mod}config on x86_64 and i386.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 12 insertions, 14 deletions

diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 4ed67ff0e81..dab74feb44b 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -181,11 +181,12 @@
 	udelay(5);
 
 #define __CHK_IO_SIZE(pci_id, dev_rev) \
- (( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x02000030) ) ? \
+ (( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x30) ) ? \
 	DM9102A_IO_SIZE: DM9102_IO_SIZE)
 
-#define CHK_IO_SIZE(pci_dev, dev_rev) \
-	(__CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, dev_rev))
+#define CHK_IO_SIZE(pci_dev) \
+	(__CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, \
+	(pci_dev)->revision))
 
 /* Sten Check */
 #define DEVICE net_device
@@ -205,7 +206,7 @@ struct rx_desc {
 
 struct dmfe_board_info {
 	u32 chip_id;			/* Chip vendor/Device ID */
-	u32 chip_revision;		/* Chip revision */
+	u8 chip_revision;		/* Chip revision */
 	struct DEVICE *next_dev;	/* next device */
 	struct pci_dev *pdev;		/* PCI device */
 	spinlock_t lock;
@@ -359,7 +360,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 {
 	struct dmfe_board_info *db;	/* board information structure */
 	struct net_device *dev;
-	u32 dev_rev, pci_pmr;
+	u32 pci_pmr;
 	int i, err;
 
 	DMFE_DBUG(0, "dmfe_init_one()", 0);
@@ -392,10 +393,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 		goto err_out_disable;
 	}
 
-	/* Read Chip revision */
-	pci_read_config_dword(pdev, PCI_REVISION_ID, &dev_rev);
-
-	if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev, dev_rev)) ) {
+	if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev)) ) {
 		printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n");
 		err = -ENODEV;
 		goto err_out_disable;
@@ -433,7 +431,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 
 	db->chip_id = ent->driver_data;
 	db->ioaddr = pci_resource_start(pdev, 0);
-	db->chip_revision = dev_rev;
+	db->chip_revision = pdev->revision;
 	db->wol_mode = 0;
 
 	db->pdev = pdev;
@@ -455,7 +453,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 
 	pci_read_config_dword(pdev, 0x50, &pci_pmr);
 	pci_pmr &= 0x70000;
-	if ( (pci_pmr == 0x10000) && (dev_rev == 0x02000031) )
+	if ( (pci_pmr == 0x10000) && (db->chip_revision == 0x31) )
 		db->chip_type = 1;	/* DM9102A E3 */
 	else
 		db->chip_type = 0;
@@ -553,7 +551,7 @@ static int dmfe_open(struct DEVICE *dev)
 
 	/* CR6 operation mode decision */
 	if ( !chkmode || (db->chip_id == PCI_DM9132_ID) ||
-		(db->chip_revision >= 0x02000030) ) {
+		(db->chip_revision >= 0x30) ) {
     		db->cr6_data |= DMFE_TXTH_256;
 		db->cr0_data = CR0_DEFAULT;
 		db->dm910x_chk_mode=4;		/* Enter the normal mode */
@@ -1199,9 +1197,9 @@ static void dmfe_timer(unsigned long data)
 		tmp_cr12 = inb(db->ioaddr + DCR12);	/* DM9102/DM9102A */
 
 	if ( ((db->chip_id == PCI_DM9102_ID) &&
-		(db->chip_revision == 0x02000030)) ||
+		(db->chip_revision == 0x30)) ||
 		((db->chip_id == PCI_DM9132_ID) &&
-		(db->chip_revision == 0x02000010)) ) {
+		(db->chip_revision == 0x10)) ) {
 		/* DM9102A Chip */
 		if (tmp_cr12 & 2)
 			link_ok = 0;