diff options
author | Paul Gortmaker <paul.gortmaker@windriver.com> | 2012-05-09 22:41:59 -0400 |
---|---|---|
committer | Paul Gortmaker <paul.gortmaker@windriver.com> | 2012-05-15 20:23:16 -0400 |
commit | ee446fd5e6dafee4a16fd1bd345d2571dcfd6f5d (patch) | |
tree | 6c2400cff6bd26c8bfb06bd523b227a0e3aa232e /drivers/net/tokenring/ibmtr_cs.c | |
parent | 211ed865108e24697b44bee5daac502ee6bdd4a4 (diff) |
tokenring: delete all remaining driver support
This represents the mass deletion of the of the tokenring support.
It gets rid of:
- the net/tr.c which the drivers depended on
- the drivers/net component
- the Kbuild infrastructure around it
- any tokenring related CONFIG_ settings in any defconfigs
- the tokenring headers in the include/linux dir
- the firmware associated with the tokenring drivers.
- any associated token ring documentation.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Diffstat (limited to 'drivers/net/tokenring/ibmtr_cs.c')
-rw-r--r-- | drivers/net/tokenring/ibmtr_cs.c | 370 |
1 files changed, 0 insertions, 370 deletions
diff --git a/drivers/net/tokenring/ibmtr_cs.c b/drivers/net/tokenring/ibmtr_cs.c deleted file mode 100644 index 356e28e4881..00000000000 --- a/drivers/net/tokenring/ibmtr_cs.c +++ /dev/null @@ -1,370 +0,0 @@ -/*====================================================================== - - A PCMCIA token-ring driver for IBM-based cards - - This driver supports the IBM PCMCIA Token-Ring Card. - Written by Steve Kipisz, kipisz@vnet.ibm.com or - bungy@ibm.net - - Written 1995,1996. - - This code is based on pcnet_cs.c from David Hinds. - - V2.2.0 February 1999 - Mike Phillips phillim@amtrak.com - - Linux V2.2.x presented significant changes to the underlying - ibmtr.c code. Mainly the code became a lot more organized and - modular. - - This caused the old PCMCIA Token Ring driver to give up and go - home early. Instead of just patching the old code to make it - work, the PCMCIA code has been streamlined, updated and possibly - improved. - - This code now only contains code required for the Card Services. - All we do here is set the card up enough so that the real ibmtr.c - driver can find it and work with it properly. - - i.e. We set up the io port, irq, mmio memory and shared ram - memory. This enables ibmtr_probe in ibmtr.c to find the card and - configure it as though it was a normal ISA and/or PnP card. - - CHANGES - - v2.2.5 April 1999 Mike Phillips (phillim@amtrak.com) - Obscure bug fix, required changed to ibmtr.c not ibmtr_cs.c - - v2.2.7 May 1999 Mike Phillips (phillim@amtrak.com) - Updated to version 2.2.7 to match the first version of the kernel - that the modification to ibmtr.c were incorporated into. - - v2.2.17 July 2000 Burt Silverman (burts@us.ibm.com) - Address translation feature of PCMCIA controller is usable so - memory windows can be placed in High memory (meaning above - 0xFFFFF.) - -======================================================================*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/timer.h> -#include <linux/module.h> -#include <linux/netdevice.h> -#include <linux/trdevice.h> -#include <linux/ibmtr.h> - -#include <pcmcia/cistpl.h> -#include <pcmcia/ds.h> - -#include <asm/uaccess.h> -#include <asm/io.h> - -#define PCMCIA -#include "ibmtr.c" - - -/*====================================================================*/ - -/* Parameters that can be set with 'insmod' */ - -/* MMIO base address */ -static u_long mmiobase = 0xce000; - -/* SRAM base address */ -static u_long srambase = 0xd0000; - -/* SRAM size 8,16,32,64 */ -static u_long sramsize = 64; - -/* Ringspeed 4,16 */ -static int ringspeed = 16; - -module_param(mmiobase, ulong, 0); -module_param(srambase, ulong, 0); -module_param(sramsize, ulong, 0); -module_param(ringspeed, int, 0); -MODULE_LICENSE("GPL"); - -/*====================================================================*/ - -static int ibmtr_config(struct pcmcia_device *link); -static void ibmtr_hw_setup(struct net_device *dev, u_int mmiobase); -static void ibmtr_release(struct pcmcia_device *link); -static void ibmtr_detach(struct pcmcia_device *p_dev); - -/*====================================================================*/ - -typedef struct ibmtr_dev_t { - struct pcmcia_device *p_dev; - struct net_device *dev; - struct tok_info *ti; -} ibmtr_dev_t; - -static irqreturn_t ibmtr_interrupt(int irq, void *dev_id) { - ibmtr_dev_t *info = dev_id; - struct net_device *dev = info->dev; - return tok_interrupt(irq, dev); -}; - -static int __devinit ibmtr_attach(struct pcmcia_device *link) -{ - ibmtr_dev_t *info; - struct net_device *dev; - - dev_dbg(&link->dev, "ibmtr_attach()\n"); - - /* Create new token-ring device */ - info = kzalloc(sizeof(*info), GFP_KERNEL); - if (!info) return -ENOMEM; - dev = alloc_trdev(sizeof(struct tok_info)); - if (!dev) { - kfree(info); - return -ENOMEM; - } - - info->p_dev = link; - link->priv = info; - info->ti = netdev_priv(dev); - - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[0]->end = 4; - link->config_flags |= CONF_ENABLE_IRQ; - link->config_regs = PRESENT_OPTION; - - info->dev = dev; - - return ibmtr_config(link); -} /* ibmtr_attach */ - -static void ibmtr_detach(struct pcmcia_device *link) -{ - struct ibmtr_dev_t *info = link->priv; - struct net_device *dev = info->dev; - struct tok_info *ti = netdev_priv(dev); - - dev_dbg(&link->dev, "ibmtr_detach\n"); - - /* - * When the card removal interrupt hits tok_interrupt(), - * bail out early, so we don't crash the machine - */ - ti->sram_phys |= 1; - - unregister_netdev(dev); - - del_timer_sync(&(ti->tr_timer)); - - ibmtr_release(link); - - free_netdev(dev); - kfree(info); -} /* ibmtr_detach */ - -static int __devinit ibmtr_config(struct pcmcia_device *link) -{ - ibmtr_dev_t *info = link->priv; - struct net_device *dev = info->dev; - struct tok_info *ti = netdev_priv(dev); - int i, ret; - - dev_dbg(&link->dev, "ibmtr_config\n"); - - link->io_lines = 16; - link->config_index = 0x61; - - /* Determine if this is PRIMARY or ALTERNATE. */ - - /* Try PRIMARY card at 0xA20-0xA23 */ - link->resource[0]->start = 0xA20; - i = pcmcia_request_io(link); - if (i != 0) { - /* Couldn't get 0xA20-0xA23. Try ALTERNATE at 0xA24-0xA27. */ - link->resource[0]->start = 0xA24; - ret = pcmcia_request_io(link); - if (ret) - goto failed; - } - dev->base_addr = link->resource[0]->start; - - ret = pcmcia_request_exclusive_irq(link, ibmtr_interrupt); - if (ret) - goto failed; - dev->irq = link->irq; - ti->irq = link->irq; - ti->global_int_enable=GLOBAL_INT_ENABLE+((dev->irq==9) ? 2 : dev->irq); - - /* Allocate the MMIO memory window */ - link->resource[2]->flags |= WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; - link->resource[2]->flags |= WIN_USE_WAIT; - link->resource[2]->start = 0; - link->resource[2]->end = 0x2000; - ret = pcmcia_request_window(link, link->resource[2], 250); - if (ret) - goto failed; - - ret = pcmcia_map_mem_page(link, link->resource[2], mmiobase); - if (ret) - goto failed; - ti->mmio = ioremap(link->resource[2]->start, - resource_size(link->resource[2])); - - /* Allocate the SRAM memory window */ - link->resource[3]->flags = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; - link->resource[3]->flags |= WIN_USE_WAIT; - link->resource[3]->start = 0; - link->resource[3]->end = sramsize * 1024; - ret = pcmcia_request_window(link, link->resource[3], 250); - if (ret) - goto failed; - - ret = pcmcia_map_mem_page(link, link->resource[3], srambase); - if (ret) - goto failed; - - ti->sram_base = srambase >> 12; - ti->sram_virt = ioremap(link->resource[3]->start, - resource_size(link->resource[3])); - ti->sram_phys = link->resource[3]->start; - - ret = pcmcia_enable_device(link); - if (ret) - goto failed; - - /* Set up the Token-Ring Controller Configuration Register and - turn on the card. Check the "Local Area Network Credit Card - Adapters Technical Reference" SC30-3585 for this info. */ - ibmtr_hw_setup(dev, mmiobase); - - SET_NETDEV_DEV(dev, &link->dev); - - i = ibmtr_probe_card(dev); - if (i != 0) { - pr_notice("register_netdev() failed\n"); - goto failed; - } - - netdev_info(dev, "port %#3lx, irq %d, mmio %#5lx, sram %#5lx, hwaddr=%pM\n", - dev->base_addr, dev->irq, - (u_long)ti->mmio, (u_long)(ti->sram_base << 12), - dev->dev_addr); - return 0; - -failed: - ibmtr_release(link); - return -ENODEV; -} /* ibmtr_config */ - -static void ibmtr_release(struct pcmcia_device *link) -{ - ibmtr_dev_t *info = link->priv; - struct net_device *dev = info->dev; - - dev_dbg(&link->dev, "ibmtr_release\n"); - - if (link->resource[2]->end) { - struct tok_info *ti = netdev_priv(dev); - iounmap(ti->mmio); - } - pcmcia_disable_device(link); -} - -static int ibmtr_suspend(struct pcmcia_device *link) -{ - ibmtr_dev_t *info = link->priv; - struct net_device *dev = info->dev; - - if (link->open) - netif_device_detach(dev); - - return 0; -} - -static int __devinit ibmtr_resume(struct pcmcia_device *link) -{ - ibmtr_dev_t *info = link->priv; - struct net_device *dev = info->dev; - - if (link->open) { - ibmtr_probe(dev); /* really? */ - netif_device_attach(dev); - } - - return 0; -} - - -/*====================================================================*/ - -static void ibmtr_hw_setup(struct net_device *dev, u_int mmiobase) -{ - int i; - - /* Bizarre IBM behavior, there are 16 bits of information we - need to set, but the card only allows us to send 4 bits at a - time. For each byte sent to base_addr, bits 7-4 tell the - card which part of the 16 bits we are setting, bits 3-0 contain - the actual information */ - - /* First nibble provides 4 bits of mmio */ - i = (mmiobase >> 16) & 0x0F; - outb(i, dev->base_addr); - - /* Second nibble provides 3 bits of mmio */ - i = 0x10 | ((mmiobase >> 12) & 0x0E); - outb(i, dev->base_addr); - - /* Third nibble, hard-coded values */ - i = 0x26; - outb(i, dev->base_addr); - - /* Fourth nibble sets shared ram page size */ - - /* 8 = 00, 16 = 01, 32 = 10, 64 = 11 */ - i = (sramsize >> 4) & 0x07; - i = ((i == 4) ? 3 : i) << 2; - i |= 0x30; - - if (ringspeed == 16) - i |= 2; - if (dev->base_addr == 0xA24) - i |= 1; - outb(i, dev->base_addr); - - /* 0x40 will release the card for use */ - outb(0x40, dev->base_addr); -} - -static const struct pcmcia_device_id ibmtr_ids[] = { - PCMCIA_DEVICE_PROD_ID12("3Com", "TokenLink Velocity PC Card", 0x41240e5b, 0x82c3734e), - PCMCIA_DEVICE_PROD_ID12("IBM", "TOKEN RING", 0xb569a6e5, 0xbf8eed47), - PCMCIA_DEVICE_NULL, -}; -MODULE_DEVICE_TABLE(pcmcia, ibmtr_ids); - -static struct pcmcia_driver ibmtr_cs_driver = { - .owner = THIS_MODULE, - .name = "ibmtr_cs", - .probe = ibmtr_attach, - .remove = ibmtr_detach, - .id_table = ibmtr_ids, - .suspend = ibmtr_suspend, - .resume = ibmtr_resume, -}; - -static int __init init_ibmtr_cs(void) -{ - return pcmcia_register_driver(&ibmtr_cs_driver); -} - -static void __exit exit_ibmtr_cs(void) -{ - pcmcia_unregister_driver(&ibmtr_cs_driver); -} - -module_init(init_ibmtr_cs); -module_exit(exit_ibmtr_cs); |