diff options
| author | Matt Carlson <mcarlson@broadcom.com> | 2008-11-03 16:52:56 -0800 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2008-11-03 16:52:56 -0800 |
| commit | df59c9403557397aafbe291533d113b752da7661 (patch) | |
| tree | 929a2af54ebf28c1548892f45de908a4c121c231 /drivers/net/tg3.c | |
| parent | b2b98d4acc58a6f36b731e666c6ebd901cd6a27e (diff) | |
tg3: Move phylib report to end of tg3_init_one
Currently, phylib reports appear with a eth%d prefix. Move the line
after register_netdev() and place it alongside the other informative
messages. Update nearby informative messages accordingly.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/tg3.c')
| -rw-r--r-- | drivers/net/tg3.c | 30 |
1 files changed, 17 insertions, 13 deletions
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 978d1f0ccb7..aebc645a3b5 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -1360,10 +1360,6 @@ static int tg3_phy_init(struct tg3 *tp) phydev->advertising = phydev->supported; - printk(KERN_INFO - "%s: attached PHY driver [%s] (mii_bus:phy_addr=%s)\n", - tp->dev->name, phydev->drv->name, phydev->dev.bus_id); - return 0; } @@ -13547,26 +13543,34 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, goto err_out_apeunmap; } - printk(KERN_INFO "%s: Tigon3 [partno(%s) rev %04x PHY(%s)] " - "(%s) %s Ethernet %pM\n", + printk(KERN_INFO "%s: Tigon3 [partno(%s) rev %04x] (%s) MAC address %pM\n", dev->name, tp->board_part_number, tp->pci_chip_rev_id, - tg3_phy_string(tp), tg3_bus_string(tp, str), - ((tp->tg3_flags & TG3_FLAG_10_100_ONLY) ? "10/100Base-TX" : - ((tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) ? "1000Base-SX" : - "10/100/1000Base-T")), dev->dev_addr); - printk(KERN_INFO "%s: RXcsums[%d] LinkChgREG[%d] " - "MIirq[%d] ASF[%d] WireSpeed[%d] TSOcap[%d]\n", + if (tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED) + printk(KERN_INFO + "%s: attached PHY driver [%s] (mii_bus:phy_addr=%s)\n", + tp->dev->name, + tp->mdio_bus->phy_map[PHY_ADDR]->drv->name, + tp->mdio_bus->phy_map[PHY_ADDR]->dev.bus_id); + else + printk(KERN_INFO + "%s: attached PHY is %s (%s Ethernet) (WireSpeed[%d])\n", + tp->dev->name, tg3_phy_string(tp), + ((tp->tg3_flags & TG3_FLAG_10_100_ONLY) ? "10/100Base-TX" : + ((tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) ? "1000Base-SX" : + "10/100/1000Base-T")), + (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0); + + printk(KERN_INFO "%s: RXcsums[%d] LinkChgREG[%d] MIirq[%d] ASF[%d] TSOcap[%d]\n", dev->name, (tp->tg3_flags & TG3_FLAG_RX_CHECKSUMS) != 0, (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) != 0, (tp->tg3_flags & TG3_FLAG_USE_MI_INTERRUPT) != 0, (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0, - (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0, (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0); printk(KERN_INFO "%s: dma_rwctrl[%08x] dma_mask[%d-bit]\n", dev->name, tp->dma_rwctrl, |