[TG3]: Fix low power state

Fix the following bugs in tg3_set_power_state():

1. Both WOL and ASF flags require switching to aux power.

2. Add a missing handshake with firmware to enable WOL.

3. Turn off the PHY if both WOL and ASF are disabled.

4. Add nvram arbitration before halting the firmware.

5. Fix tg3_setup_copper_phy() to switch to 100Mbps when
   changing to low power state.

Update revision and date.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 39 insertions, 5 deletions

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index a143c18c7bc..a23ed28a72b 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -68,8 +68,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.44"
-#define DRV_MODULE_RELDATE	"Dec 6, 2005"
+#define DRV_MODULE_VERSION	"3.45"
+#define DRV_MODULE_RELDATE	"Dec 13, 2005"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -1025,7 +1025,9 @@ static void tg3_frob_aux_power(struct tg3 *tp)
 
 
 	if ((tp->tg3_flags & TG3_FLAG_WOL_ENABLE) != 0 ||
-	    (tp_peer->tg3_flags & TG3_FLAG_WOL_ENABLE) != 0) {
+	    (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0 ||
+	    (tp_peer->tg3_flags & TG3_FLAG_WOL_ENABLE) != 0 ||
+	    (tp_peer->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0) {
 		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
 		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701) {
 			tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
@@ -1105,6 +1107,8 @@ static int tg3_setup_phy(struct tg3 *, int);
 
 static void tg3_write_sig_post_reset(struct tg3 *, int);
 static int tg3_halt_cpu(struct tg3 *, u32);
+static int tg3_nvram_lock(struct tg3 *);
+static void tg3_nvram_unlock(struct tg3 *);
 
 static int tg3_set_power_state(struct tg3 *tp, int state)
 {
@@ -1179,6 +1183,21 @@ static int tg3_set_power_state(struct tg3 *tp, int state)
 		tg3_setup_phy(tp, 0);
 	}
 
+	if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) {
+		int i;
+		u32 val;
+
+		for (i = 0; i < 200; i++) {
+			tg3_read_mem(tp, NIC_SRAM_FW_ASF_STATUS_MBOX, &val);
+			if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1)
+				break;
+			msleep(1);
+		}
+	}
+	tg3_write_mem(tp, NIC_SRAM_WOL_MBOX, WOL_SIGNATURE |
+					     WOL_DRV_STATE_SHUTDOWN |
+					     WOL_DRV_WOL | WOL_SET_MAGIC_PKT);
+
 	pci_read_config_word(tp->pdev, pm + PCI_PM_PMC, &power_caps);
 
 	if (tp->tg3_flags & TG3_FLAG_WOL_ENABLE) {
@@ -1268,6 +1287,17 @@ static int tg3_set_power_state(struct tg3 *tp, int state)
 		}
 	}
 
+	if (!(tp->tg3_flags & TG3_FLAG_WOL_ENABLE) &&
+	    !(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) {
+		/* Turn off the PHY */
+		if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)) {
+			tg3_writephy(tp, MII_TG3_EXT_CTRL,
+				     MII_TG3_EXT_CTRL_FORCE_LED_OFF);
+			tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x01b2);
+			tg3_writephy(tp, MII_BMCR, BMCR_PDOWN);
+		}
+	}
+
 	tg3_frob_aux_power(tp);
 
 	/* Workaround for unstable PLL clock */
@@ -1277,8 +1307,12 @@ static int tg3_set_power_state(struct tg3 *tp, int state)
 
 		val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1);
 		tw32(0x7d00, val);
-		if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF))
+		if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) {
+			tg3_nvram_lock(tp);
 			tg3_halt_cpu(tp, RX_CPU_BASE);
+			tw32_f(NVRAM_SWARB, SWARB_REQ_CLR0);
+			tg3_nvram_unlock(tp);
+		}
 	}
 
 	/* Finally, set the new power state. */
@@ -1812,7 +1846,7 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
 		}
 	}
 relink:
-	if (current_link_up == 0) {
+	if (current_link_up == 0 || tp->link_config.phy_is_low_power) {
 		u32 tmp;
 
 		tg3_phy_copper_begin(tp);