aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/sb1250-mac.c
diff options
context:
space:
mode:
authorMaciej W. Rozycki <macro@linux-mips.org>2007-09-21 12:52:10 +0100
committerDavid S. Miller <davem@sunset.davemloft.net>2007-10-10 16:53:47 -0700
commitf5279ffdce9bcff938451303126971098e23aab3 (patch)
tree2f2dac7da64e224e4dd1f28c842c3e01f7d3cefc /drivers/net/sb1250-mac.c
parent73d7396980176a5f4515be2f6e39ee417d2369ba (diff)
sb1250-mac: Driver model & phylib update
A driver model and phylib update. It includes the following changes: 1. Removal of unused module options. 2. Phylib support and the resulting removal of generic bits for handling the PHY. 3. Proper reserving of device resources and using ioremap()ped handles to access MAC registers rather than platform-specific macros. 4. Handling of the device using the driver model. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net/sb1250-mac.c')
-rw-r--r--drivers/net/sb1250-mac.c1119
1 files changed, 519 insertions, 600 deletions
diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c
index 0cffd46724d..7b53d658e33 100644
--- a/drivers/net/sb1250-mac.c
+++ b/drivers/net/sb1250-mac.c
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2001,2002,2003,2004 Broadcom Corporation
+ * Copyright (c) 2006, 2007 Maciej W. Rozycki
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -18,7 +19,12 @@
*
* This driver is designed for the Broadcom SiByte SOC built-in
* Ethernet controllers. Written by Mitch Lichtenberg at Broadcom Corp.
+ *
+ * Updated to the driver model and the PHY abstraction layer
+ * by Maciej W. Rozycki.
*/
+
+#include <linux/bug.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
@@ -32,9 +38,15 @@
#include <linux/skbuff.h>
#include <linux/init.h>
#include <linux/bitops.h>
-#include <asm/processor.h> /* Processor type for cache alignment. */
-#include <asm/io.h>
+#include <linux/err.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+
#include <asm/cache.h>
+#include <asm/io.h>
+#include <asm/processor.h> /* Processor type for cache alignment. */
/* This is only here until the firmware is ready. In that case,
the firmware leaves the ethernet address in the register for us. */
@@ -48,7 +60,7 @@
/* These identify the driver base version and may not be removed. */
#if 0
-static char version1[] __devinitdata =
+static char version1[] __initdata =
"sb1250-mac.c:1.00 1/11/2001 Written by Mitch Lichtenberg\n";
#endif
@@ -57,8 +69,6 @@ static char version1[] __devinitdata =
#define CONFIG_SBMAC_COALESCE
-#define MAX_UNITS 4 /* More are supported, limit only on options */
-
/* Time in jiffies before concluding the transmitter is hung. */
#define TX_TIMEOUT (2*HZ)
@@ -74,26 +84,6 @@ static int debug = 1;
module_param(debug, int, S_IRUGO);
MODULE_PARM_DESC(debug, "Debug messages");
-/* mii status msgs */
-static int noisy_mii = 1;
-module_param(noisy_mii, int, S_IRUGO);
-MODULE_PARM_DESC(noisy_mii, "MII status messages");
-
-/* Used to pass the media type, etc.
- Both 'options[]' and 'full_duplex[]' should exist for driver
- interoperability.
- The media type is usually passed in 'options[]'.
-*/
-#ifdef MODULE
-static int options[MAX_UNITS] = {-1, -1, -1, -1};
-module_param_array(options, int, NULL, S_IRUGO);
-MODULE_PARM_DESC(options, "1-" __MODULE_STRING(MAX_UNITS));
-
-static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1};
-module_param_array(full_duplex, int, NULL, S_IRUGO);
-MODULE_PARM_DESC(full_duplex, "1-" __MODULE_STRING(MAX_UNITS));
-#endif
-
#ifdef CONFIG_SBMAC_COALESCE
static int int_pktcnt_tx = 255;
module_param(int_pktcnt_tx, int, S_IRUGO);
@@ -112,6 +102,7 @@ module_param(int_timeout_rx, int, S_IRUGO);
MODULE_PARM_DESC(int_timeout_rx, "RX timeout value");
#endif
+#include <asm/sibyte/board.h>
#include <asm/sibyte/sb1250.h>
#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
#include <asm/sibyte/bcm1480_regs.h>
@@ -135,22 +126,43 @@ MODULE_PARM_DESC(int_timeout_rx, "RX timeout value");
#error invalid SiByte MAC configuation
#endif
+#ifdef K_INT_PHY
+#define SBMAC_PHY_INT K_INT_PHY
+#else
+#define SBMAC_PHY_INT PHY_POLL
+#endif
+
/**********************************************************************
* Simple types
********************************************************************* */
+enum sbmac_speed {
+ sbmac_speed_none = 0,
+ sbmac_speed_10 = SPEED_10,
+ sbmac_speed_100 = SPEED_100,
+ sbmac_speed_1000 = SPEED_1000,
+};
-enum sbmac_speed { sbmac_speed_auto, sbmac_speed_10,
- sbmac_speed_100, sbmac_speed_1000 };
-
-enum sbmac_duplex { sbmac_duplex_auto, sbmac_duplex_half,
- sbmac_duplex_full };
+enum sbmac_duplex {
+ sbmac_duplex_none = -1,
+ sbmac_duplex_half = DUPLEX_HALF,
+ sbmac_duplex_full = DUPLEX_FULL,
+};
-enum sbmac_fc { sbmac_fc_auto, sbmac_fc_disabled, sbmac_fc_frame,
- sbmac_fc_collision, sbmac_fc_carrier } sbmac_fc_t;
+enum sbmac_fc {
+ sbmac_fc_none,
+ sbmac_fc_disabled,
+ sbmac_fc_frame,
+ sbmac_fc_collision,
+ sbmac_fc_carrier,
+};
-enum sbmac_state { sbmac_state_uninit, sbmac_state_off, sbmac_state_on,
- sbmac_state_broken };
+enum sbmac_state {
+ sbmac_state_uninit,
+ sbmac_state_off,
+ sbmac_state_on,
+ sbmac_state_broken,
+};
/**********************************************************************
@@ -244,18 +256,14 @@ struct sbmac_softc {
*/
struct net_device *sbm_dev; /* pointer to linux device */
struct napi_struct napi;
+ struct phy_device *phy_dev; /* the associated PHY device */
+ struct mii_bus mii_bus; /* the MII bus */
+ int phy_irq[PHY_MAX_ADDR];
spinlock_t sbm_lock; /* spin lock */
- struct timer_list sbm_timer; /* for monitoring MII */
int sbm_devflags; /* current device flags */
- int sbm_phy_oldbmsr;
- int sbm_phy_oldanlpar;
- int sbm_phy_oldk1stsr;
- int sbm_phy_oldlinkstat;
int sbm_buffersize;
- unsigned char sbm_phys[2];
-
/*
* Controller-specific things
*/
@@ -274,6 +282,8 @@ struct sbmac_softc {
enum sbmac_speed sbm_speed; /* current speed */
enum sbmac_duplex sbm_duplex; /* current duplex */
enum sbmac_fc sbm_fc; /* cur. flow control setting */
+ int sbm_pause; /* current pause setting */
+ int sbm_link; /* current link state */
unsigned char sbm_hwaddr[ETHER_ADDR_LEN];
@@ -313,36 +323,37 @@ static uint64_t sbmac_addr2reg(unsigned char *ptr);
static irqreturn_t sbmac_intr(int irq, void *dev_instance);
static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev);
static void sbmac_setmulti(struct sbmac_softc *sc);
-static int sbmac_init(struct net_device *dev, int idx);
+static int sbmac_init(struct platform_device *pldev, long long base);
static int sbmac_set_speed(struct sbmac_softc *s, enum sbmac_speed speed);
static int sbmac_set_duplex(struct sbmac_softc *s, enum sbmac_duplex duplex,
enum sbmac_fc fc);
static int sbmac_open(struct net_device *dev);
-static void sbmac_timer(unsigned long data);
static void sbmac_tx_timeout (struct net_device *dev);
static void sbmac_set_rx_mode(struct net_device *dev);
static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
static int sbmac_close(struct net_device *dev);
static int sbmac_poll(struct napi_struct *napi, int budget);
-static int sbmac_mii_poll(struct sbmac_softc *s, int noisy);
+static void sbmac_mii_poll(struct net_device *dev);
static int sbmac_mii_probe(struct net_device *dev);
-static void sbmac_mii_sync(struct sbmac_softc *s);
-static void sbmac_mii_senddata(struct sbmac_softc *s, unsigned int data,
+static void sbmac_mii_sync(void __iomem *sbm_mdio);
+static void sbmac_mii_senddata(void __iomem *sbm_mdio, unsigned int data,
int bitcnt);
-static unsigned int sbmac_mii_read(struct sbmac_softc *s, int phyaddr,
- int regidx);
-static void sbmac_mii_write(struct sbmac_softc *s, int phyaddr, int regidx,
- unsigned int regval);
+static int sbmac_mii_read(struct mii_bus *bus, int phyaddr, int regidx);
+static int sbmac_mii_write(struct mii_bus *bus, int phyaddr, int regidx,
+ u16 val);
/**********************************************************************
* Globals
********************************************************************* */
-static uint64_t sbmac_orig_hwaddr[MAX_UNITS];
+static char sbmac_string[] = "sb1250-mac";
+static char sbmac_pretty[] = "SB1250 MAC";
+
+static char sbmac_mdio_string[] = "sb1250-mac-mdio";
/**********************************************************************
@@ -354,185 +365,66 @@ static uint64_t sbmac_orig_hwaddr[MAX_UNITS];
#define MII_COMMAND_WRITE 0x01
#define MII_COMMAND_ACK 0x02
-#define BMCR_RESET 0x8000
-#define BMCR_LOOPBACK 0x4000
-#define BMCR_SPEED0 0x2000
-#define BMCR_ANENABLE 0x1000
-#define BMCR_POWERDOWN 0x0800
-#define BMCR_ISOLATE 0x0400
-#define BMCR_RESTARTAN 0x0200
-#define BMCR_DUPLEX 0x0100
-#define BMCR_COLTEST 0x0080
-#define BMCR_SPEED1 0x0040
-#define BMCR_SPEED1000 BMCR_SPEED1
-#define BMCR_SPEED100 BMCR_SPEED0
-#define BMCR_SPEED10 0
-
-#define BMSR_100BT4 0x8000
-#define BMSR_100BT_FDX 0x4000
-#define BMSR_100BT_HDX 0x2000
-#define BMSR_10BT_FDX 0x1000
-#define BMSR_10BT_HDX 0x0800
-#define BMSR_100BT2_FDX 0x0400
-#define BMSR_100BT2_HDX 0x0200
-#define BMSR_1000BT_XSR 0x0100
-#define BMSR_PRESUP 0x0040
-#define BMSR_ANCOMPLT 0x0020
-#define BMSR_REMFAULT 0x0010
-#define BMSR_AUTONEG 0x0008
-#define BMSR_LINKSTAT 0x0004
-#define BMSR_JABDETECT 0x0002
-#define BMSR_EXTCAPAB 0x0001
-
-#define PHYIDR1 0x2000
-#define PHYIDR2 0x5C60
-
-#define ANAR_NP 0x8000
-#define ANAR_RF 0x2000
-#define ANAR_ASYPAUSE 0x0800
-#define ANAR_PAUSE 0x0400
-#define ANAR_T4 0x0200
-#define ANAR_TXFD 0x0100
-#define ANAR_TXHD 0x0080
-#define ANAR_10FD 0x0040
-#define ANAR_10HD 0x0020
-#define ANAR_PSB 0x0001
-
-#define ANLPAR_NP 0x8000
-#define ANLPAR_ACK 0x4000
-#define ANLPAR_RF 0x2000
-#define ANLPAR_ASYPAUSE 0x0800
-#define ANLPAR_PAUSE 0x0400
-#define ANLPAR_T4 0x0200
-#define ANLPAR_TXFD 0x0100
-#define ANLPAR_TXHD 0x0080
-#define ANLPAR_10FD 0x0040
-#define ANLPAR_10HD 0x0020
-#define ANLPAR_PSB 0x0001 /* 802.3 */
-
-#define ANER_PDF 0x0010
-#define ANER_LPNPABLE 0x0008
-#define ANER_NPABLE 0x0004
-#define ANER_PAGERX 0x0002
-#define ANER_LPANABLE 0x0001
-
-#define ANNPTR_NP 0x8000
-#define ANNPTR_MP 0x2000
-#define ANNPTR_ACK2 0x1000
-#define ANNPTR_TOGTX 0x0800
-#define ANNPTR_CODE 0x0008
-
-#define ANNPRR_NP 0x8000
-#define ANNPRR_MP 0x2000
-#define ANNPRR_ACK3 0x1000
-#define ANNPRR_TOGTX 0x0800
-#define ANNPRR_CODE 0x0008
-
-#define K1TCR_TESTMODE 0x0000
-#define K1TCR_MSMCE 0x1000
-#define K1TCR_MSCV 0x0800
-#define K1TCR_RPTR 0x0400
-#define K1TCR_1000BT_FDX 0x200
-#define K1TCR_1000BT_HDX 0x100
-
-#define K1STSR_MSMCFLT 0x8000
-#define K1STSR_MSCFGRES 0x4000
-#define K1STSR_LRSTAT 0x2000
-#define K1STSR_RRSTAT 0x1000
-#define K1STSR_LP1KFD 0x0800
-#define K1STSR_LP1KHD 0x0400
-#define K1STSR_LPASMDIR 0x0200
-
-#define K1SCR_1KX_FDX 0x8000
-#define K1SCR_1KX_HDX 0x4000
-#define K1SCR_1KT_FDX 0x2000
-#define K1SCR_1KT_HDX 0x1000
-
-#define STRAP_PHY1 0x0800
-#define STRAP_NCMODE 0x0400
-#define STRAP_MANMSCFG 0x0200
-#define STRAP_ANENABLE 0x0100
-#define STRAP_MSVAL 0x0080
-#define STRAP_1KHDXADV 0x0010
-#define STRAP_1KFDXADV 0x0008
-#define STRAP_100ADV 0x0004
-#define STRAP_SPEEDSEL 0x0000
-#define STRAP_SPEED100 0x0001
-
-#define PHYSUP_SPEED1000 0x10
-#define PHYSUP_SPEED100 0x08
-#define PHYSUP_SPEED10 0x00
-#define PHYSUP_LINKUP 0x04
-#define PHYSUP_FDX 0x02
-
-#define MII_BMCR 0x00 /* Basic mode control register (rw) */
-#define MII_BMSR 0x01 /* Basic mode status register (ro) */
-#define MII_PHYIDR1 0x02
-#define MII_PHYIDR2 0x03
-
-#define MII_K1STSR 0x0A /* 1K Status Register (ro) */
-#define MII_ANLPAR 0x05 /* Autonegotiation lnk partner abilities (rw) */
-
-
#define M_MAC_MDIO_DIR_OUTPUT 0 /* for clarity */
#define ENABLE 1
#define DISABLE 0
/**********************************************************************
- * SBMAC_MII_SYNC(s)
+ * SBMAC_MII_SYNC(sbm_mdio)
*
* Synchronize with the MII - send a pattern of bits to the MII
* that will guarantee that it is ready to accept a command.
*
* Input parameters:
- * s - sbmac structure
+ * sbm_mdio - address of the MAC's MDIO register
*
* Return value:
* nothing
********************************************************************* */
-static void sbmac_mii_sync(struct sbmac_softc *s)
+static void sbmac_mii_sync(void __iomem *sbm_mdio)
{
int cnt;
uint64_t bits;
int mac_mdio_genc;
- mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC;
+ mac_mdio_genc = __raw_readq(sbm_mdio) & M_MAC_GENC;
bits = M_MAC_MDIO_DIR_OUTPUT | M_MAC_MDIO_OUT;
- __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio);
+ __raw_writeq(bits | mac_mdio_genc, sbm_mdio);
for (cnt = 0; cnt < 32; cnt++) {
- __raw_writeq(bits | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio);
- __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio);
+ __raw_writeq(bits | M_MAC_MDC | mac_mdio_genc, sbm_mdio);
+ __raw_writeq(bits | mac_mdio_genc, sbm_mdio);
}
}
/**********************************************************************
- * SBMAC_MII_SENDDATA(s,data,bitcnt)
+ * SBMAC_MII_SENDDATA(sbm_mdio, data, bitcnt)
*
* Send some bits to the MII. The bits to be sent are right-
* justified in the 'data' parameter.
*
* Input parameters:
- * s - sbmac structure
- * data - data to send
- * bitcnt - number of bits to send
+ * sbm_mdio - address of the MAC's MDIO register
+ * data - data to send
+ * bitcnt - number of bits to send
********************************************************************* */
-static void sbmac_mii_senddata(struct sbmac_softc *s,unsigned int data, int bitcnt)
+static void sbmac_mii_senddata(void __iomem *sbm_mdio, unsigned int data,
+ int bitcnt)
{
int i;
uint64_t bits;
unsigned int curmask;
int mac_mdio_genc;
- mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC;
+ mac_mdio_genc = __raw_readq(sbm_mdio) & M_MAC_GENC;
bits = M_MAC_MDIO_DIR_OUTPUT;
- __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio);
+ __raw_writeq(bits | mac_mdio_genc, sbm_mdio);
curmask = 1 << (bitcnt - 1);
@@ -540,9 +432,9 @@ static void sbmac_mii_senddata(struct sbmac_softc *s,unsigned int data, int bitc
if (data & curmask)
bits |= M_MAC_MDIO_OUT;
else bits &= ~M_MAC_MDIO_OUT;
- __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio);
- __raw_writeq(bits | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio);
- __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio);
+ __raw_writeq(bits | mac_mdio_genc, sbm_mdio);
+ __raw_writeq(bits | M_MAC_MDC | mac_mdio_genc, sbm_mdio);
+ __raw_writeq(bits | mac_mdio_genc, sbm_mdio);
curmask >>= 1;
}
}
@@ -550,21 +442,22 @@ static void sbmac_mii_senddata(struct sbmac_softc *s,unsigned int data, int bitc
/**********************************************************************
- * SBMAC_MII_READ(s,phyaddr,regidx)
- *
+ * SBMAC_MII_READ(bus, phyaddr, regidx)
* Read a PHY register.
*
* Input parameters:
- * s - sbmac structure
+ * bus - MDIO bus handle
* phyaddr - PHY's address
- * regidx = index of register to read
+ * regnum - index of register to read
*
* Return value:
- * value read, or 0 if an error occurred.
+ * value read, or 0xffff if an error occurred.
********************************************************************* */
-static unsigned int sbmac_mii_read(struct sbmac_softc *s,int phyaddr,int regidx)
+static int sbmac_mii_read(struct mii_bus *bus, int phyaddr, int regidx)
{
+ struct sbmac_softc *sc = (struct sbmac_softc *)bus->priv;
+ void __iomem *sbm_mdio = sc->sbm_mdio;
int idx;
int error;
int regval;
@@ -574,8 +467,7 @@ static unsigned int sbmac_mii_read(struct sbmac_softc *s,int phyaddr,int regidx)
* Synchronize ourselves so that the PHY knows the next
* thing coming down is a command
*/
-
- sbmac_mii_sync(s);
+ sbmac_mii_sync(sbm_mdio);
/*
* Send the data to the PHY. The sequence is
@@ -584,37 +476,37 @@ static unsigned int sbmac_mii_read(struct sbmac_softc *s,int phyaddr,int regidx)
* the PHY addr (5 bits)
* the register index (5 bits)
*/
+ sbmac_mii_senddata(sbm_mdio, MII_COMMAND_START, 2);
+ sbmac_mii_senddata(sbm_mdio, MII_COMMAND_READ, 2);
+ sbmac_mii_senddata(sbm_mdio, phyaddr, 5);
+ sbmac_mii_senddata(sbm_mdio, regidx, 5);
- sbmac_mii_senddata(s,MII_COMMAND_START, 2);
- sbmac_mii_senddata(s,MII_COMMAND_READ, 2);
- sbmac_mii_senddata(s,phyaddr, 5);
- sbmac_mii_senddata(s,regidx, 5);
-
- mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC;
+ mac_mdio_genc = __raw_readq(sbm_mdio) & M_MAC_GENC;
/*
* Switch the port around without a clock transition.
*/
- __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio);
+ __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, sbm_mdio);
/*
* Send out a clock pulse to signal we want the status
*/
-
- __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio);
- __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio);
+ __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc,
+ sbm_mdio);
+ __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, sbm_mdio);
/*
* If an error occurred, the PHY will signal '1' back
*/
- error = __raw_readq(s->sbm_mdio) & M_MAC_MDIO_IN;
+ error = __raw_readq(sbm_mdio) & M_MAC_MDIO_IN;
/*
* Issue an 'idle' clock pulse, but keep the direction
* the same.
*/
- __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio);
- __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio);
+ __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc,
+ sbm_mdio);
+ __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, sbm_mdio);
regval = 0;
@@ -622,55 +514,60 @@ static unsigned int sbmac_mii_read(struct sbmac_softc *s,int phyaddr,int regidx)
regval <<= 1;
if (error == 0) {
- if (__raw_readq(s->sbm_mdio) & M_MAC_MDIO_IN)
+ if (__raw_readq(sbm_mdio) & M_MAC_MDIO_IN)
regval |= 1;
}
- __raw_writeq(M_MAC_MDIO_DIR_INPUT|M_MAC_MDC | mac_mdio_genc, s->sbm_mdio);
- __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio);
+ __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc,
+ sbm_mdio);
+ __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, sbm_mdio);
}
/* Switch back to output */
- __raw_writeq(M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc, s->sbm_mdio);
+ __raw_writeq(M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc, sbm_mdio);
if (error == 0)
return regval;
- return 0;
+ return 0xffff;
}
/**********************************************************************
- * SBMAC_MII_WRITE(s,phyaddr,regidx,regval)
+ * SBMAC_MII_WRITE(bus, phyaddr, regidx, regval)
*
* Write a value to a PHY register.
*
* Input parameters:
- * s - sbmac structure
+ * bus - MDIO bus handle
* phyaddr - PHY to use
- * regidx - register within the PHY
- * regval - data to write to register
+ * regidx - register within the PHY
+ * regval - data to write to register
*
* Return value:
- * nothing
+ * 0 for success
********************************************************************* */
-static void sbmac_mii_write(struct sbmac_softc *s,int phyaddr,int regidx,
- unsigned int regval)
+static int sbmac_mii_write(struct mii_bus *bus, int phyaddr, int regidx,
+ u16 regval)
{
+ struct sbmac_softc *sc = (struct sbmac_softc *)bus->priv;
+ void __iomem *sbm_mdio = sc->sbm_mdio;
int mac_mdio_genc;
- sbmac_mii_sync(s);
+ sbmac_mii_sync(sbm_mdio);
- sbmac_mii_senddata(s,MII_COMMAND_START,2);
- sbmac_mii_senddata(s,MII_COMMAND_WRITE,2);
- sbmac_mii_senddata(s,phyaddr, 5);
- sbmac_mii_senddata(s,regidx, 5);
- sbmac_mii_senddata(s,MII_COMMAND_ACK,2);
- sbmac_mii_senddata(s,regval,16);
+ sbmac_mii_senddata(sbm_mdio, MII_COMMAND_START, 2);
+ sbmac_mii_senddata(sbm_mdio, MII_COMMAND_WRITE, 2);
+ sbmac_mii_senddata(sbm_mdio, phyaddr, 5);
+ sbmac_mii_senddata(sbm_mdio, regidx, 5);
+ sbmac_mii_senddata(sbm_mdio, MII_COMMAND_ACK, 2);
+ sbmac_mii_senddata(sbm_mdio, regval, 16);
- mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC;
+ mac_mdio_genc = __raw_readq(sbm_mdio) & M_MAC_GENC;
- __raw_writeq(M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc, s->sbm_mdio);
+ __raw_writeq(M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc, sbm_mdio);
+
+ return 0;
}
@@ -713,27 +610,27 @@ static void sbdma_initctx(struct sbmacdma *d, struct sbmac_softc *s, int chan,
s->sbe_idx =(s->sbm_base - A_MAC_BASE_0)/MAC_SPACING;
#endif
- __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_BYTES)));
- __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_COLLISIONS)));
- __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_LATE_COL)));
- __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_EX_COL)));
- __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_FCS_ERROR)));
- __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_ABORT)));
- __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_BAD)));
- __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_GOOD)));
- __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_RUNT)));
- __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_OVERSIZE)));
- __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BYTES)));
- __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_MCAST)));
- __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BCAST)));
- __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BAD)));
- __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_GOOD)));
- __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_RUNT)));
- __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_OVERSIZE)));
- __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_FCS_ERROR)));
- __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_LENGTH_ERROR)));
- __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_CODE_ERROR)));
- __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_ALIGN_ERROR)));
+ __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_BYTES);
+ __raw_writeq(0, s->sbm_base + R_MAC_RMON_COLLISIONS);
+ __raw_writeq(0, s->sbm_base + R_MAC_RMON_LATE_COL);
+ __raw_writeq(0, s->sbm_base + R_MAC_RMON_EX_COL);
+ __raw_writeq(0, s->sbm_base + R_MAC_RMON_FCS_ERROR);
+ __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_ABORT);
+ __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_BAD);
+ __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_GOOD);
+ __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_RUNT);
+ __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_OVERSIZE);
+ __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_BYTES);
+ __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_MCAST);
+ __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_BCAST);
+ __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_BAD);
+ __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_GOOD);
+ __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_RUNT);
+ __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_OVERSIZE);
+ __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_FCS_ERROR);
+ __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_LENGTH_ERROR);
+ __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_CODE_ERROR);
+ __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_ALIGN_ERROR);
/*
* initialize register pointers
@@ -953,7 +850,7 @@ static int sbdma_add_rcvbuffer(struct sbmacdma *d, struct sk_buff *sb)
if (sb == NULL) {
sb_new = dev_alloc_skb(ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN);
if (sb_new == NULL) {
- printk(KERN_INFO "%s: sk_buff allocation failed\n",
+ pr_info("%s: sk_buff allocation failed\n",
d->sbdma_eth->sbm_dev->name);
return -ENOBUFS;
}
@@ -1472,14 +1369,6 @@ static int sbmac_initctx(struct sbmac_softc *s)
s->sbm_imr = s->sbm_base + R_MAC_INT_MASK;
s->sbm_mdio = s->sbm_base + R_MAC_MDIO;
- s->sbm_phys[0] = 1;
- s->sbm_phys[1] = 0;
-
- s->sbm_phy_oldbmsr = 0;
- s->sbm_phy_oldanlpar = 0;
- s->sbm_phy_oldk1stsr = 0;
- s->sbm_phy_oldlinkstat = 0;
-
/*
* Initialize the DMA channels. Right now, only one per MAC is used
* Note: Only do this _once_, as it allocates memory from the kernel!
@@ -1494,14 +1383,6 @@ static int sbmac_initctx(struct sbmac_softc *s)
s->sbm_state = sbmac_state_off;
- /*
- * Initial speed is (XXX TEMP) 10MBit/s HDX no FC
- */
-
- s->sbm_speed = sbmac_speed_10;
- s->sbm_duplex = sbmac_duplex_half;
- s->sbm_fc = sbmac_fc_disabled;
-
return 0;
}
@@ -2008,8 +1889,6 @@ static int sbmac_set_speed(struct sbmac_softc *s, enum sbmac_speed speed)
cfg |= V_MAC_SPEED_SEL_1000MBPS | M_MAC_BURST_EN;
break;
- case sbmac_speed_auto: /* XXX not implemented */
- /* fall through */
default:
return 0;
}
@@ -2083,8 +1962,6 @@ static int sbmac_set_duplex(struct sbmac_softc *s, enum sbmac_duplex duplex,
cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENAB_FALSECARR;
break;
- case sbmac_fc_auto: /* XXX not implemented */
- /* fall through */
case sbmac_fc_frame: /* not valid in half duplex */
default: /* invalid selection */
return 0;
@@ -2103,15 +1980,12 @@ static int sbmac_set_duplex(struct sbmac_softc *s, enum sbmac_duplex duplex,
case sbmac_fc_collision: /* not valid in full duplex */
case sbmac_fc_carrier: /* not valid in full duplex */
- case sbmac_fc_auto: /* XXX not implemented */
- /* fall through */
default:
return 0;
}
break;
- case sbmac_duplex_auto:
- /* XXX not implemented */
- break;
+ default:
+ return 0;
}
/*
@@ -2390,7 +2264,7 @@ static int sb1250_change_mtu(struct net_device *_dev, int new_mtu)
if (new_mtu > ENET_PACKET_SIZE)
return -EINVAL;
_dev->mtu = new_mtu;
- printk(KERN_INFO "changing the mtu to %d\n", new_mtu);
+ pr_info("changing the mtu to %d\n", new_mtu);
return 0;
}
@@ -2406,20 +2280,17 @@ static int sb1250_change_mtu(struct net_device *_dev, int new_mtu)
* status
********************************************************************* */
-static int sbmac_init(struct net_device *dev, int idx)
+static int sbmac_init(struct platform_device *pldev, long long base)
{
- struct sbmac_softc *sc;
+ struct net_device *dev = pldev->dev.driver_data;
+ int idx = pldev->id;
+ struct sbmac_softc *sc = netdev_priv(dev);
unsigned char *eaddr;
uint64_t ea_reg;
int i;
int err;
DECLARE_MAC_BUF(mac);
- sc = netdev_priv(dev);
-
- /* Determine controller base address */
-
- sc->sbm_base = IOADDR(dev->base_addr);
sc->sbm_dev = dev;
sc->sbe_idx = idx;
@@ -2476,43 +2347,55 @@ static int sbmac_init(struct net_device *dev, int idx)
dev->poll_controller = sbmac_netpoll;
#endif
+ dev->irq = UNIT_INT(idx);
+
/* This is needed for PASS2 for Rx H/W checksum feature */
sbmac_set_iphdr_offset(sc);
err = register_netdev(dev);
- if (err)
- goto out_uninit;
-
- if (sc->rx_hw_checksum == ENABLE) {
- printk(KERN_INFO "%s: enabling TCP rcv checksum\n",
- sc->sbm_dev->name);
+ if (err) {
+ printk(KERN_ERR "%s.%d: unable to register netdev\n",
+ sbmac_string, idx);
+ sbmac_uninitctx(sc);
+ return err;
}
+ pr_info("%s.%d: registered as %s\n", sbmac_string, idx, dev->name);
+
+ if (sc->rx_hw_checksum == ENABLE)
+ pr_info("%s: enabling TCP rcv checksum\n", dev->name);
+
/*
* Display Ethernet address (this is called during the config
* process so we need to finish off the config message that
* was being displayed)
*/
- printk(KERN_INFO
- "%s: SiByte Ethernet at 0x%08lX, address: %s\n",
- dev->name, dev->base_addr, print_mac(mac, eaddr));
+ pr_info("%s: SiByte Ethernet at 0x%08Lx, address: %s\n",
+ dev->name, base, print_mac(mac, eaddr));
- return 0;
+ sc->mii_bus.name = sbmac_mdio_string;
+ sc->mii_bus.id = idx;
+ sc->mii_bus.priv = sc;
+ sc->mii_bus.read = sbmac_mii_read;
+ sc->mii_bus.write = sbmac_mii_write;
+ sc->mii_bus.irq = sc->phy_irq;
+ for (i = 0; i < PHY_MAX_ADDR; ++i)
+ sc->mii_bus.irq[i] = SBMAC_PHY_INT;
-out_uninit:
- sbmac_uninitctx(sc);
+ sc->mii_bus.dev = &pldev->dev;
+ dev_set_drvdata(&pldev->dev, &sc->mii_bus);
- return err;
+ return 0;
}
static int sbmac_open(struct net_device *dev)
{
struct sbmac_softc *sc = netdev_priv(dev);
+ int err;
- if (debug > 1) {
- printk(KERN_DEBUG "%s: sbmac_open() irq %d.\n", dev->name, dev->irq);
- }
+ if (debug > 1)
+ pr_debug("%s: sbmac_open() irq %d.\n", dev->name, dev->irq);
/*
* map/route interrupt (clear status first, in case something
@@ -2521,25 +2404,35 @@ static int sbmac_open(struct net_device *dev)
*/
__raw_readq(sc->sbm_isr);
- if (request_irq(dev->irq, &sbmac_intr, IRQF_SHARED, dev->name, dev))
- return -EBUSY;
+ err = request_irq(dev->irq, &sbmac_intr, IRQF_SHARED, dev->name, dev);
+ if (err) {
+ printk(KERN_ERR "%s: unable to get IRQ %d\n", dev->name,
+ dev->irq);
+ goto out_err;
+ }
/*
- * Probe phy address
+ * Probe PHY address
*/
-
- if(sbmac_mii_probe(dev) == -1) {
- printk("%s: failed to probe PHY.\n", dev->name);
- return -EINVAL;
+ err = mdiobus_register(&sc->mii_bus);
+ if (err) {
+ printk(KERN_ERR "%s: unable to register MDIO bus\n",
+ dev->name);
+ goto out_unirq;
}
- napi_enable(&sc->napi);
+ sc->sbm_speed = sbmac_speed_none;
+ sc->sbm_duplex = sbmac_duplex_none;
+ sc->sbm_fc = sbmac_fc_none;
+ sc->sbm_pause = -1;
+ sc->sbm_link = 0;
/*
- * Configure default speed
+ * Attach to the PHY
*/
-
- sbmac_mii_poll(sc,noisy_mii);
+ err = sbmac_mii_probe(dev);
+ if (err)
+ goto out_unregister;
/*
* Turn on the channel
@@ -2547,200 +2440,133 @@ static int sbmac_open(struct net_device *dev)
sbmac_set_channel_state(sc,sbmac_state_on);
- /*
- * XXX Station address is in dev->dev_addr
- */
-
- if (dev->if_port == 0)
- dev->if_port = 0;
-
netif_start_queue(dev);
sbmac_set_rx_mode(dev);
- /* Set the timer to check for link beat. */
- init_timer(&sc->sbm_timer);
- sc->sbm_timer.expires = jiffies + 2 * HZ/100;
- sc->sbm_timer.data = (unsigned long)dev;
- sc->sbm_timer.function = &sbmac_timer;
- add_timer(&sc->sbm_timer);
+ phy_start(sc->phy_dev);
+
+ napi_enable(&sc->napi);
return 0;
+
+out_unregister:
+ mdiobus_unregister(&sc->mii_bus);
+
+out_unirq:
+ free_irq(dev->irq, dev);
+
+out_err:
+ return err;
}
static int sbmac_mii_probe(struct net_device *dev)
{
+ struct sbmac_softc *sc = netdev_priv(dev);
+ struct phy_device *phy_dev;
int i;
- struct sbmac_softc *s = netdev_priv(dev);
- u16 bmsr, id1, id2;
- u32 vendor, device;
-
- for (i=1; i<31; i++) {
- bmsr = sbmac_mii_read(s, i, MII_BMSR);
- if (bmsr != 0) {
- s->sbm_phys[0] = i;
- id1 = sbmac_mii_read(s, i, MII_PHYIDR1);
- id2 = sbmac_mii_read(s, i, MII_PHYIDR2);
- vendor = ((u32)id1 << 6) | ((id2 >> 10) & 0x3f);
- device = (id2 >> 4) & 0x3f;
-
- printk(KERN_INFO "%s: found phy %d, vendor %06x part %02x\n",
- dev->name, i, vendor, device);
- return i;
- }
- }
- return -1;
-}
-
-
-static int sbmac_mii_poll(struct sbmac_softc *s,int noisy)
-{
- int bmsr,bmcr,k1stsr,anlpar;
- int chg;
- char buffer[100];
- char *p = buffer;
-
- /* Read the mode status and mode control registers. */
- bmsr = sbmac_mii_read(s,s->sbm_phys[0],MII_BMSR);
- bmcr = sbmac_mii_read(s,s->sbm_phys[0],MII_BMCR);
-
- /* get the link partner status */
- anlpar = sbmac_mii_read(s,s->sbm_phys[0],MII_ANLPAR);
- /* if supported, read the 1000baseT register */
- if (bmsr & BMSR_1000BT_XSR) {
- k1stsr = sbmac_mii_read(s,s->sbm_phys[0],MII_K1STSR);
- }
- else {
- k1stsr = 0;
- }
-
- chg = 0;
-
- if ((bmsr & BMSR_LINKSTAT) == 0) {
- /*
- * If link status is down, clear out old info so that when
- * it comes back up it will force us to reconfigure speed
- */
- s->sbm_phy_oldbmsr = 0;
- s->sbm_phy_oldanlpar = 0;
- s->sbm_phy_oldk1stsr = 0;
- return 0;
+ for (i = 0; i < PHY_MAX_ADDR; i++) {
+ phy_dev = sc->mii_bus.phy_map[i];
+ if (phy_dev)
+ break;
}
-
- if ((s->sbm_phy_oldbmsr != bmsr) ||
- (s->sbm_phy_oldanlpar != anlpar) ||
- (s->sbm_phy_oldk1stsr != k1stsr)) {
- if (debug > 1) {
- printk(KERN_DEBUG "%s: bmsr:%x/%x anlpar:%x/%x k1stsr:%x/%x\n",
- s->sbm_dev->name,
- s->sbm_phy_oldbmsr,bmsr,
- s->sbm_phy_oldanlpar,anlpar,
- s->sbm_phy_oldk1stsr,k1stsr);
- }
- s->sbm_phy_oldbmsr = bmsr;
- s->sbm_phy_oldanlpar = anlpar;
- s->sbm_phy_oldk1stsr = k1stsr;
- chg = 1;
+ if (!phy_dev) {
+ printk(KERN_ERR "%s: no PHY found\n", dev->name);
+ return -ENXIO;
}
- if (chg == 0)
- return 0;
-
- p += sprintf(p,"Link speed: ");
-
- if (k1stsr & K1STSR_LP1KFD) {
- s->sbm_speed = sbmac_speed_1000;
- s->sbm_duplex = sbmac_duplex_full;
- s->sbm_fc = sbmac_fc_frame;
- p += sprintf(p,"1000BaseT FDX");
- }
- else if (k1stsr & K1STSR_LP1KHD) {
- s->sbm_speed = sbmac_speed_1000;
- s->sbm_duplex = sbmac_duplex_half;
- s->sbm_fc = sbmac_fc_disabled;
- p += sprintf(p,"1000BaseT HDX");
- }
- else if (anlpar & ANLPAR_TXFD) {
- s->sbm_speed = sbmac_speed_100;
- s->sbm_duplex = sbmac_duplex_full;
- s->sbm_fc = (anlpar & ANLPAR_PAUSE) ? sbmac_fc_frame : sbmac_fc_disabled;
- p += sprintf(p,"100BaseT FDX");
- }
- else if (anlpar & ANLPAR_TXHD) {
- s->sbm_speed = sbmac_speed_100;
- s->sbm_duplex = sbmac_duplex_half;
- s->sbm_fc = sbmac_fc_disabled;
- p += sprintf(p,"100BaseT HDX");
- }
- else if (anlpar & ANLPAR_10FD) {
- s->sbm_speed = sbmac_speed_10;
- s->sbm_duplex = sbmac_duplex_full;
- s->sbm_fc = sbmac_fc_frame;
- p += sprintf(p,"10BaseT FDX");
- }
- else if (anlpar & ANLPAR_10HD) {
- s->sbm_speed = sbmac_speed_10;
- s->sbm_duplex = sbmac_duplex_half;
- s->sbm_fc = sbmac_fc_collision;
- p += sprintf(p,"10BaseT HDX");
- }
- else {
- p += sprintf(p,"Unknown");
+ phy_dev = phy_connect(dev, phy_dev->dev.bus_id, &sbmac_mii_poll, 0,
+ PHY_INTERFACE_MODE_GMII);
+ if (IS_ERR(phy_dev)) {
+ printk(KERN_ERR "%s: could not attach to PHY\n", dev->name);
+ return PTR_ERR(phy_dev);
}
- if (noisy) {
- printk(KERN_INFO "%s: %s\n",s->sbm_dev->name,buffer);
- }
+ /* Remove any features not supported by the controller */
+ phy_dev->supported &= SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Half |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_Autoneg |
+ SUPPORTED_MII |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause;
+ phy_dev->advertising = phy_dev->supported;
+
+ pr_info("%s: attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
+ dev->name, phy_dev->drv->name,
+ phy_dev->dev.bus_id, phy_dev->irq);
+
+ sc->phy_dev = phy_dev;
- return 1;
+ return 0;
}
-static void sbmac_timer(unsigned long data)
+static void sbmac_mii_poll(struct net_device *dev)
{
- struct net_device *dev = (struct net_device *)data;
struct sbmac_softc *sc = netdev_priv(dev);
- int next_tick = HZ;
- int mii_status;
+ struct phy_device *phy_dev = sc->phy_dev;
+ unsigned long flags;
+ enum sbmac_fc fc;
+ int link_chg, speed_chg, duplex_chg, pause_chg, fc_chg;
+
+ link_chg = (sc->sbm_link != phy_dev->link);
+ speed_chg = (sc->sbm_speed != phy_dev->speed);
+ duplex_chg = (sc->sbm_duplex != phy_dev->duplex);
+ pause_chg = (sc->sbm_pause != phy_dev->pause);
+
+ if (!link_chg && !speed_chg && !duplex_chg && !pause_chg)
+ return; /* Hmmm... */
+
+ if (!phy_dev->link) {
+ if (link_chg) {
+ sc->sbm_link = phy_dev->link;
+ sc->sbm_speed = sbmac_speed_none;
+ sc->sbm_duplex = sbmac_duplex_none;
+ sc->sbm_fc = sbmac_fc_disabled;
+ sc->sbm_pause = -1;
+ pr_info("%s: link unavailable\n", dev->name);
+ }
+ return;
+ }
- spin_lock_irq (&sc->sbm_lock);
+ if (phy_dev->duplex == DUPLEX_FULL) {
+ if (phy_dev->pause)
+ fc = sbmac_fc_frame;
+ else
+ fc = sbmac_fc_disabled;
+ } else
+ fc = sbmac_fc_collision;
+ fc_chg = (sc->sbm_fc != fc);
- /* make IFF_RUNNING follow the MII status bit "Link established" */
- mii_status = sbmac_mii_read(sc, sc->sbm_phys[0], MII_BMSR);
+ pr_info("%s: link available: %dbase-%cD\n", dev->name, phy_dev->speed,
+ phy_dev->duplex == DUPLEX_FULL ? 'F' : 'H');
- if ( (mii_status & BMSR_LINKSTAT) != (sc->sbm_phy_oldlinkstat) ) {
- sc->sbm_phy_oldlinkstat = mii_status & BMSR_LINKSTAT;
- if (mii_status & BMSR_LINKSTAT) {
- netif_carrier_on(dev);
- }
- else {
- netif_carrier_off(dev);
- }
- }
+ spin_lock_irqsave(&sc->sbm_lock, flags);
- /*
- * Poll the PHY to see what speed we should be running at
- */
+ sc->sbm_speed = phy_dev->speed;
+ sc->sbm_duplex = phy_dev->duplex;
+ sc->sbm_fc = fc;
+ sc->sbm_pause = phy_dev->pause;
+ sc->sbm_link = phy_dev->link;
- if (sbmac_mii_poll(sc,noisy_mii)) {
- if (sc->sbm_state != sbmac_state_off) {
- /*
- * something changed, restart the channel
- */
- if (debug > 1) {
- printk("%s: restarting channel because speed changed\n",
- sc->sbm_dev->name);
- }
- sbmac_channel_stop(sc);
- sbmac_channel_start(sc);
- }
+ if ((speed_chg || duplex_chg || fc_chg) &&
+ sc->sbm_state != sbmac_state_off) {
+ /*
+ * something changed, restart the channel
+ */
+ if (debug > 1)
+ pr_debug("%s: restarting channel "
+ "because PHY state changed\n", dev->name);
+ sbmac_channel_stop(sc);
+ sbmac_channel_start(sc);
}
- spin_unlock_irq (&sc->sbm_lock);
-
- sc->sbm_timer.expires = jiffies + next_tick;
- add_timer(&sc->sbm_timer);
+ spin_unlock_irqrestore(&sc->sbm_lock, flags);
}
@@ -2793,64 +2619,34 @@ static void sbmac_set_rx_mode(struct net_device *dev)
static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
struct sbmac_softc *sc = netdev_priv(dev);
- u16 *data = (u16 *)&rq->ifr_ifru;
- unsigned long flags;
- int retval;
- spin_lock_irqsave(&sc->sbm_lock, flags);
- retval = 0;
-
- switch(cmd) {
- case SIOCDEVPRIVATE: /* Get the address of the PHY in use. */
- data[0] = sc->sbm_phys[0] & 0x1f;
- /* Fall Through */
- case SIOCDEVPRIVATE+1: /* Read the specified MII register. */
- data[3] = sbmac_mii_read(sc, data[0] & 0x1f, data[1] & 0x1f);
- break;
- case SIOCDEVPRIVATE+2: /* Write the specified MII register */
- if (!capable(CAP_NET_ADMIN)) {
- retval = -EPERM;
- break;
- }
- if (debug > 1) {
- printk(KERN_DEBUG "%s: sbmac_mii_ioctl: write %02X %02X %02X\n",dev->name,
- data[0],data[1],data[2]);
- }
- sbmac_mii_write(sc, data[0] & 0x1f, data[1] & 0x1f, data[2]);
- break;
- default:
- retval = -EOPNOTSUPP;
- }
+ if (!netif_running(dev) || !sc->phy_dev)
+ return -EINVAL;
- spin_unlock_irqrestore(&sc->sbm_lock, flags);
- return retval;
+ return phy_mii_ioctl(sc->phy_dev, if_mii(rq), cmd);
}
static int sbmac_close(struct net_device *dev)
{
struct sbmac_softc *sc = netdev_priv(dev);
- unsigned long flags;
- int irq;
napi_disable(&sc->napi);
- sbmac_set_channel_state(sc,sbmac_state_off);
-
- del_timer_sync(&sc->sbm_timer);
+ phy_stop(sc->phy_dev);
- spin_lock_irqsave(&sc->sbm_lock, flags);
+ sbmac_set_channel_state(sc, sbmac_state_off);
netif_stop_queue(dev);
- if (debug > 1) {
- printk(KERN_DEBUG "%s: Shutting down ethercard\n",dev->name);
- }
+ if (debug > 1)
+ pr_debug("%s: Shutting down ethercard\n", dev->name);
- spin_unlock_irqrestore(&sc->sbm_lock, flags);
+ phy_disconnect(sc->phy_dev);
+ sc->phy_dev = NULL;
+
+ mdiobus_unregister(&sc->mii_bus);
- irq = dev->irq;
- synchronize_irq(irq);
- free_irq(irq, dev);
+ free_irq(dev->irq, dev);
sbdma_emptyring(&(sc->sbm_txdma));
sbdma_emptyring(&(sc->sbm_rxdma));
@@ -2883,54 +2679,195 @@ static int sbmac_poll(struct napi_struct *napi, int budget)
return work_done;
}
+
+static int __init sbmac_probe(struct platform_device *pldev)
+{
+ struct net_device *dev;
+ struct sbmac_softc *sc;
+ void __iomem *sbm_base;
+ struct resource *res;
+ u64 sbmac_orig_hwaddr;
+ int err;
+
+ res = platform_get_resource(pldev, IORESOURCE_MEM, 0);
+ BUG_ON(!res);
+ sbm_base = ioremap_nocache(res->start, res->end - res->start + 1);
+ if (!sbm_base) {
+ printk(KERN_ERR "%s: unable to map device registers\n",
+ pldev->dev.bus_id);
+ err = -ENOMEM;
+ goto out_out;
+ }
+
+ /*
+ * The R_MAC_ETHERNET_ADDR register will be set to some nonzero
+ * value for us by the firmware if we're going to use this MAC.
+ * If we find a zero, skip this MAC.
+ */
+ sbmac_orig_hwaddr = __raw_readq(sbm_base + R_MAC_ETHERNET_ADDR);
+ pr_debug("%s: %sconfiguring MAC at 0x%08Lx\n", pldev->dev.bus_id,
+ sbmac_orig_hwaddr ? "" : "not ", (long long)res->start);
+ if (sbmac_orig_hwaddr == 0) {
+ err = 0;
+ goto out_unmap;
+ }
+
+ /*
+ * Okay, cool. Initialize this MAC.
+ */
+ dev = alloc_etherdev(sizeof(struct sbmac_softc));
+ if (!dev) {
+ printk(KERN_ERR "%s: unable to allocate etherdev\n",
+ pldev->dev.bus_id);
+ err = -ENOMEM;
+ goto out_unmap;
+ }
+
+ pldev->dev.driver_data = dev;
+ SET_NETDEV_DEV(dev, &pldev->dev);
+
+ sc = netdev_priv(dev);
+ sc->sbm_base = sbm_base;
+
+ err = sbmac_init(pldev, res->start);
+ if (err)
+ goto out_kfree;
+
+ return 0;
+
+out_kfree:
+ free_netdev(dev);
+ __raw_writeq(sbmac_orig_hwaddr, sbm_base + R_MAC_ETHERNET_ADDR);
+
+out_unmap:
+ iounmap(sbm_base);
+
+out_out:
+ return err;
+}
+
+static int __exit sbmac_remove(struct platform_device *pldev)
+{
+ struct net_device *dev = pldev->dev.driver_data;
+ struct sbmac_softc *sc = netdev_priv(dev);
+
+ unregister_netdev(dev);
+ sbmac_uninitctx(sc);
+ iounmap(sc->sbm_base);
+ free_netdev(dev);
+
+ return 0;
+}
+
+
+static struct platform_device **sbmac_pldev;
+static int sbmac_max_units;
+
#if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR) || defined(SBMAC_ETH3_HWADDR)
-static void
-sbmac_setup_hwaddr(int chan,char *addr)
+static void __init sbmac_setup_hwaddr(int idx, char *addr)
{
+ void __iomem *sbm_base;
+ unsigned long start, end;
uint8_t eaddr[6];
uint64_t val;
- unsigned long port;
- port = A_MAC_CHANNEL_BASE(chan);
- sbmac_parse_hwaddr(addr,eaddr);
+ if (idx >= sbmac_max_units)
+ return;
+
+ start = A_MAC_CHANNEL_BASE(idx);
+ end = A_MAC_CHANNEL_BASE(idx + 1) - 1;
+
+ sbm_base = ioremap_nocache(start, end - start + 1);
+ if (!sbm_base) {
+ printk(KERN_ERR "%s: unable to map device registers\n",
+ sbmac_string);
+ return;
+ }
+
+ sbmac_parse_hwaddr(addr, eaddr);
val = sbmac_addr2reg(eaddr);
- __raw_writeq(val, IOADDR(port+R_MAC_ETHERNET_ADDR));
- val = __raw_readq(IOADDR(port+R_MAC_ETHERNET_ADDR));
+ __raw_writeq(val, sbm_base + R_MAC_ETHERNET_ADDR);
+ val = __raw_readq(sbm_base + R_MAC_ETHERNET_ADDR);
+
+ iounmap(sbm_base);
}
#endif
-static struct net_device *dev_sbmac[MAX_UNITS];
+static int __init sbmac_platform_probe_one(int idx)
+{
+ struct platform_device *pldev;
+ struct {
+ struct resource r;
+ char name[strlen(sbmac_pretty) + 4];
+ } *res;
+ int err;
+
+ res = kzalloc(sizeof(*res), GFP_KERNEL);
+ if (!res) {
+ printk(KERN_ERR "%s.%d: unable to allocate memory\n",
+ sbmac_string, idx);
+ err = -ENOMEM;
+ goto out_err;
+ }
+
+ /*
+ * This is the base address of the MAC.
+ */
+ snprintf(res->name, sizeof(res->name), "%s %d", sbmac_pretty, idx);
+ res->r.name = res->name;
+ res->r.flags = IORESOURCE_MEM;
+ res->r.start = A_MAC_CHANNEL_BASE(idx);
+ res->r.end = A_MAC_CHANNEL_BASE(idx + 1) - 1;
+
+ pldev = platform_device_register_simple(sbmac_string, idx, &res->r, 1);
+ if (IS_ERR(pldev)) {
+ printk(KERN_ERR "%s.%d: unable to register platform device\n",
+ sbmac_string, idx);
+ err = PTR_ERR(pldev);
+ goto out_kfree;
+ }
+
+ if (!pldev->dev.driver) {
+ err = 0; /* No hardware at this address. */
+ goto out_unregister;
+ }
+
+ sbmac_pldev[idx] = pldev;
+ return 0;
+
+out_unregister:
+ platform_device_unregister(pldev);
-static int __init
-sbmac_init_module(void)
+out_kfree:
+ kfree(res);
+
+out_err:
+ return err;
+}
+
+static void __init sbmac_platform_probe(void)
{
- int idx;
- struct net_device *dev;
- unsigned long port;
- int chip_max_units;
+ int i;
/* Set the number of available units based on the SOC type. */
switch (soc_type) {
case K_SYS_SOC_TYPE_BCM1250:
case K_SYS_SOC_TYPE_BCM1250_ALT:
- chip_max_units = 3;
+ sbmac_max_units = 3;
break;
case K_SYS_SOC_TYPE_BCM1120:
case K_SYS_SOC_TYPE_BCM1125:
case K_SYS_SOC_TYPE_BCM1125H:
- case K_SYS_SOC_TYPE_BCM1250_ALT2: /* Hybrid */
- chip_max_units = 2;
+ case K_SYS_SOC_TYPE_BCM1250_ALT2: /* Hybrid */
+ sbmac_max_units = 2;
break;
case K_SYS_SOC_TYPE_BCM1x55:
case K_SYS_SOC_TYPE_BCM1x80:
- chip_max_units = 4;
+ sbmac_max_units = 4;
break;
default:
- chip_max_units = 0;
- break;
+ return; /* none */
}
- if (chip_max_units > MAX_UNITS)
- chip_max_units = MAX_UNITS;
/*
* For bringup when not using the firmware, we can pre-fill
@@ -2938,89 +2875,71 @@ sbmac_init_module(void)
* specified in this file (or maybe from the config file?)
*/
#ifdef SBMAC_ETH0_HWADDR
- if (chip_max_units > 0)
- sbmac_setup_hwaddr(0,SBMAC_ETH0_HWADDR);
+ sbmac_setup_hwaddr(0, SBMAC_ETH0_HWADDR);
#endif
#ifdef SBMAC_ETH1_HWADDR
- if (chip_max_units > 1)
- sbmac_setup_hwaddr(1,SBMAC_ETH1_HWADDR);
+ sbmac_setup_hwaddr(1, SBMAC_ETH1_HWADDR);
#endif
#ifdef SBMAC_ETH2_HWADDR
- if (chip_max_units > 2)
- sbmac_setup_hwaddr(2,SBMAC_ETH2_HWADDR);
+ sbmac_setup_hwaddr(2, SBMAC_ETH2_HWADDR);
#endif
#ifdef SBMAC_ETH3_HWADDR
- if (chip_max_units > 3)
- sbmac_setup_hwaddr(3,SBMAC_ETH3_HWADDR);
+ sbmac_setup_hwaddr(3, SBMAC_ETH3_HWADDR);
#endif
+ sbmac_pldev = kcalloc(sbmac_max_units, sizeof(*sbmac_pldev),
+ GFP_KERNEL);
+ if (!sbmac_pldev) {
+ printk(KERN_ERR "%s: unable to allocate memory\n",
+ sbmac_string);
+ return;
+ }
+
/*
* Walk through the Ethernet controllers and find
* those who have their MAC addresses set.
*/
- for (idx = 0; idx < chip_max_units; idx++) {
+ for (i = 0; i < sbmac_max_units; i++)
+ if (sbmac_platform_probe_one(i))
+ break;
+}
- /*
- * This is the base address of the MAC.
- */
- port = A_MAC_CHANNEL_BASE(idx);
+static void __exit sbmac_platform_cleanup(void)
+{
+ int i;
- /*
- * The R_MAC_ETHERNET_ADDR register will be set to some nonzero
- * value for us by the firmware if we are going to use this MAC.
- * If we find a zero, skip this MAC.
- */
+ for (i = 0; i < sbmac_max_units; i++)
+ platform_device_unregister(sbmac_pldev[i]);
+ kfree(sbmac_pldev);
+}
- sbmac_orig_hwaddr[idx] = __raw_readq(IOADDR(port+R_MAC_ETHERNET_ADDR));
- if (sbmac_orig_hwaddr[idx] == 0) {
- printk(KERN_DEBUG "sbmac: not configuring MAC at "
- "%lx\n", port);
- continue;
- }
- /*
- * Okay, cool. Initialize this MAC.
- */
+static struct platform_driver sbmac_driver = {
+ .probe = sbmac_probe,
+ .remove = __exit_p(sbmac_remove),
+ .driver = {
+ .name = sbmac_string,
+ },
+};
- dev = alloc_etherdev(sizeof(struct sbmac_softc));
- if (!dev)
- return -ENOMEM;
+static int __init sbmac_init_module(void)
+{
+ int err;
- printk(KERN_DEBUG "sbmac: configuring MAC at %lx\n", port);
+ err = platform_driver_register(&sbmac_driver);
+ if (err)
+ return err;
- dev->irq = UNIT_INT(idx);
- dev->base_addr = port;
- dev->mem_end = 0;
- if (sbmac_init(dev, idx)) {
- port = A_MAC_CHANNEL_BASE(idx);
- __raw_writeq(sbmac_orig_hwaddr[idx], IOADDR(port+R_MAC_ETHERNET_ADDR));
- free_netdev(dev);
- continue;
- }
- dev_sbmac[idx] = dev;
- }
- return 0;
-}
+ sbmac_platform_probe();
+ return err;
+}
-static void __exit
-sbmac_cleanup_module(void)
+static void __exit sbmac_cleanup_module(void)
{
- struct net_device *dev;
- int idx;
-
- for (idx = 0; idx < MAX_UNITS; idx++) {
- struct sbmac_softc *sc;
- dev = dev_sbmac[idx];
- if (!dev)
- continue;
-
- sc = netdev_priv(dev);
- unregister_netdev(dev);
- sbmac_uninitctx(sc);
- free_netdev(dev);
- }
+ sbmac_platform_cleanup();
+ platform_driver_unregister(&sbmac_driver);
}
module_init(sbmac_init_module);